From be4cf0083512a1e5cc67a27bfe9c692f4f7a7b7e Mon Sep 17 00:00:00 2001 From: Thomas Karl Pietrowski Date: Tue, 5 Jul 2016 18:22:56 +0200 Subject: [PATCH] BQ Hephestos2: Heat up nozzle while leveling MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Saves time and preheats the nozzle to the correct temperature (set by Cura). Btw. the BQ support explained me the reason why they are assuming 210°C needs to set here. The reason is that the printer is just meant to be used with PLA, so they are only expecting to use exactly 210°C. Just explained them why this is incorrect when think about the possibility that Cura can set the temperature on it's own. --- resources/definitions/bq_hephestos_2.def.json | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/resources/definitions/bq_hephestos_2.def.json b/resources/definitions/bq_hephestos_2.def.json index 374e41f93c..51777ff83e 100644 --- a/resources/definitions/bq_hephestos_2.def.json +++ b/resources/definitions/bq_hephestos_2.def.json @@ -14,7 +14,7 @@ }, "overrides": { - "machine_start_gcode": { "default_value": "; -- START GCODE --\nM800 ; Custom GCODE to fire start print procedure\nM109 S{material_print_temperature} ;Makes sure the temperature is correct before printing\n; -- end of START GCODE --" }, + "machine_start_gcode": { "default_value": "; -- START GCODE --\nM104 S{material_print_temperature} ; Heat up extruder while leveling\nM800 ; Custom GCODE to fire start print procedure\nM109 S{material_print_temperature} ; Makes sure the temperature is correct before printing\n; -- end of START GCODE --" }, "machine_end_gcode": { "default_value": "; -- END GCODE --\nM801 ; Custom GCODE to fire end print procedure\n; -- end of END GCODE --" }, "machine_width": { "default_value": 210 }, "machine_depth": { "default_value": 297 },