add goofoo,renkforce printf (#8959)

* add goofoo,renkforce printf

* 优化PVA打印的配置

* 修正双喷打印不能重叠的问题

* 修改配置信息

* 添加机型配置

* 新增 goofoo 2-1混色脚本，优化机型配置.

* 优化goofoo 2-1混色脚本

* 调整了机型配置

* 添加不同口径喷嘴

* 添加喷嘴口径

* 修改机器名称不对的问题

* modify setting_version = 16 to setting_version = 17

* modify renkforce & goofoo's files setting_version = 16 to 17

* modify pva support_pattern & e-one size

* modify pva support pattern to grid

Co-authored-by: laiqiqi <laiqiqi886@163.com>

resources/quality/goofoo/pa_cf/goofoo_far_0.40_pa_cf_fine.inst.cfg

@@ -0,0 +1,16 @@
+[general]
+version = 4
+name = Fine Quality
+definition = goofoo_far
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = fine
+material = goofoo_pa_cf
+variant = 0.4mm Nozzle
+
+[values]
+wall_thickness = =line_width*4
+adhesion_type = brim
+retraction_amount = 6

resources/quality/goofoo/pa_cf/goofoo_far_0.40_pa_cf_standard.inst.cfg

@@ -0,0 +1,16 @@
+[general]
+version = 4
+name = Standard Quality
+definition = goofoo_far
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = normal
+material = goofoo_pa_cf
+variant = 0.4mm Nozzle
+
+[values]
+wall_thickness = =line_width*4
+adhesion_type = brim
+retraction_amount = 6

resources/quality/goofoo/pa_cf/goofoo_near_0.40_pa_cf_fine.inst.cfg

@@ -0,0 +1,16 @@
+[general]
+version = 4
+name = Fine Quality
+definition = goofoo_near
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = fine
+material = goofoo_pa_cf
+variant = 0.4mm Nozzle
+
+[values]
+wall_thickness = =line_width*4
+adhesion_type = brim
+retraction_amount = 4.5

resources/quality/goofoo/pa_cf/goofoo_near_0.40_pa_cf_standard.inst.cfg

@@ -0,0 +1,16 @@
+[general]
+version = 4
+name = Standard Quality
+definition = goofoo_near
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = normal
+material = goofoo_pa_cf
+variant = 0.4mm Nozzle
+
+[values]
+wall_thickness = =line_width*4
+adhesion_type = brim
+retraction_amount = 4.5