diff --git a/resources/definitions/abax_pri3.def.json b/resources/definitions/abax_pri3.def.json
new file mode 100644
index 0000000000..af37c24edd
--- /dev/null
+++ b/resources/definitions/abax_pri3.def.json
@@ -0,0 +1,90 @@
+{
+  "id": "PRi3",
+  "name": "ABAX PRi3",
+  "version": 2,
+  "inherits": "fdmprinter",
+  "metadata": {
+    "visible": true,
+    "author": "ABAX 3d Technologies",
+    "manufacturer": "ABAX 3d Technologies",
+    "category": "3D Printer",
+    "file_formats": "text/x-gcode",
+    "platform": "bq_hephestos_platform.stl",
+    "platform_offset": [
+      0,
+      -82,
+      0
+    ]
+  },
+  "overrides": {
+    "machine_start_gcode": {
+      "default_value": "; -- START GCODE --\nG21                     ;set units to millimetres\nG90                     ;set to absolute positioning\nM106 S0                 ;set fan speed to zero (turned off)\nG28 X0 Y0               ;move to the X/Y origin (Home)\nG28 Z0                  ;move to the Z origin (Home)\nG1 Z5.0 F200          ;move Z to position 5.0 mm\nG92 E0                  ;zero the extruded length\n; -- end of START GCODE --"
+    },
+    "machine_end_gcode": {
+      "default_value": "; -- END GCODE --\nM104 S0                 ;set extruder temperature to zero (turned off)\nM140 S0  ;set temp of bed to Zero  \nG91                     ;set to relative positioning\nG1 E-10 F300            ;retract the filament a bit to release some of the pressure\nG1 F2000 X0 Y215                 ;move X to min and Y to max \nG90                     ;set to absolute positioning\nM84                     ;turn off steppers\n; -- end of END GCODE --"
+    },
+    "machine_width": {
+      "default_value": 225
+    },
+    "machine_depth": {
+      "default_value": 220
+    },
+    "machine_height": {
+      "default_value": 200
+    },
+    "machine_heated_bed": {
+      "default_value": false
+    },
+    "machine_center_is_zero": {
+      "default_value": false
+    },
+    "machine_gcode_flavor": {
+      "default_value": "RepRap"
+    },
+    "layer_height": {
+      "default_value": 0.2
+    },
+    "layer_height_0": {
+      "default_value": 0.2
+    },
+    "wall_thickness": {
+      "default_value": 1
+    },
+    "top_bottom_thickness": {
+      "default_value": 1
+    },
+    "bottom_thickness": {
+      "default_value": 1
+    },
+    "material_print_temperature": {
+      "default_value": 200
+    },
+    "material_bed_temperature": {
+      "default_value": 0
+    },
+    "material_diameter": {
+      "default_value": 1.75
+    },
+    "speed_print": {
+      "default_value": 40
+    },
+    "speed_infill": {
+      "default_value": 70
+    },
+    "speed_wall": {
+      "default_value": 25
+    },
+    "speed_topbottom": {
+      "default_value": 15
+    },
+    "speed_travel": {
+      "default_value": 150
+    },
+    "speed_layer_0": {
+      "default_value": 30
+    },
+    "support_enable": {
+      "default_value": true
+    }
+  }
+}
\ No newline at end of file
diff --git a/resources/definitions/abax_pri5.def.json b/resources/definitions/abax_pri5.def.json
new file mode 100644
index 0000000000..9f2009f75c
--- /dev/null
+++ b/resources/definitions/abax_pri5.def.json
@@ -0,0 +1,90 @@
+{
+  "id": "PRi5",
+  "name": "ABAX PRi5",
+  "version": 2,
+  "inherits": "fdmprinter",
+  "metadata": {
+    "visible": true,
+    "author": "ABAX 3d Technologies",
+    "manufacturer": "ABAX 3d Technologies",
+    "category": "3D Printer",
+    "file_formats": "text/x-gcode",
+    "platform": "bq_hephestos_platform.stl",
+    "platform_offset": [
+      0,
+      -82,
+      0
+    ]
+  },
+  "overrides": {
+    "machine_start_gcode": {
+      "default_value": "; -- START GCODE --\nG21                     ;set units to millimetres\nG90                     ;set to absolute positioning\nM106 S0                 ;set fan speed to zero (turned off)\nG28 X0 Y0               ;move to the X/Y origin (Home)\nG28 Z0                  ;move to the Z origin (Home)\nG1 Z5.0 F200          ;move Z to position 5.0 mm\nG92 E0                  ;zero the extruded length\n; -- end of START GCODE --"
+    },
+    "machine_end_gcode": {
+      "default_value": "; -- END GCODE --\nM104 S0                 ;set extruder temperature to zero (turned off)\nM140 S0  ;set temp of bed to Zero  \nG91                     ;set to relative positioning\nG1 E-10 F300            ;retract the filament a bit to release some of the pressure\nG1 F2000 X0 Y300                 ;move X to min and Y to max \nG90                     ;set to absolute positioning\nM84                     ;turn off steppers\n; -- end of END GCODE --"
+    },
+    "machine_width": {
+      "default_value": 310
+    },
+    "machine_depth": {
+      "default_value": 310
+    },
+    "machine_height": {
+      "default_value": 300
+    },
+    "machine_heated_bed": {
+      "default_value": false
+    },
+    "machine_center_is_zero": {
+      "default_value": false
+    },
+    "machine_gcode_flavor": {
+      "default_value": "RepRap"
+    },
+    "layer_height": {
+      "default_value": 0.2
+    },
+    "layer_height_0": {
+      "default_value": 0.2
+    },
+    "wall_thickness": {
+      "default_value": 1
+    },
+    "top_bottom_thickness": {
+      "default_value": 1
+    },
+    "bottom_thickness": {
+      "default_value": 1
+    },
+    "material_print_temperature": {
+      "default_value": 200
+    },
+    "material_bed_temperature": {
+      "default_value": 0
+    },
+    "material_diameter": {
+      "default_value": 1.75
+    },
+    "speed_print": {
+      "default_value": 40
+    },
+    "speed_infill": {
+      "default_value": 70
+    },
+    "speed_wall": {
+      "default_value": 25
+    },
+    "speed_topbottom": {
+      "default_value": 15
+    },
+    "speed_travel": {
+      "default_value": 150
+    },
+    "speed_layer_0": {
+      "default_value": 30
+    },
+    "support_enable": {
+      "default_value": true
+    }
+  }
+}
\ No newline at end of file
diff --git a/resources/definitions/abax_titan.def.json b/resources/definitions/abax_titan.def.json
new file mode 100644
index 0000000000..d1ac92139e
--- /dev/null
+++ b/resources/definitions/abax_titan.def.json
@@ -0,0 +1,90 @@
+{
+  "id": "Titan",
+  "name": "ABAX Titan",
+  "version": 2,
+  "inherits": "fdmprinter",
+  "metadata": {
+    "visible": true,
+    "author": "ABAX 3d Technologies",
+    "manufacturer": "ABAX 3d Technologies",
+    "category": "3D Printer",
+    "file_formats": "text/x-gcode",
+    "platform": "bq_hephestos_platform.stl",
+    "platform_offset": [
+      0,
+      -82,
+      0
+    ]
+  },
+  "overrides": {
+    "machine_start_gcode": {
+      "default_value": "; -- START GCODE --\nG21                     ;set units to millimetres\nG90                     ;set to absolute positioning\nM106 S0                 ;set fan speed to zero (turned off)\nG28 X0 Y0               ;move to the X/Y origin (Home)\nG28 Z0                  ;move to the Z origin (Home)\nG1 Z5.0 F200          ;move Z to position 5.0 mm\nG92 E0                  ;zero the extruded length\n; -- end of START GCODE --"
+    },
+    "machine_end_gcode": {
+      "default_value": "; -- END GCODE --\nM104 S0                 ;set extruder temperature to zero (turned off)\nM140 S0  ;set temp of bed to Zero  \nG91                     ;set to relative positioning\nG1 E-10 F300            ;retract the filament a bit to release some of the pressure\nG1 F2000 X0 Y300                 ;move X to min and Y to max \nG90                     ;set to absolute positioning\nM84                     ;turn off steppers\n; -- end of END GCODE --"
+    },
+    "machine_width": {
+      "default_value": 310
+    },
+    "machine_depth": {
+      "default_value": 310
+    },
+    "machine_height": {
+      "default_value": 300
+    },
+    "machine_heated_bed": {
+      "default_value": false
+    },
+    "machine_center_is_zero": {
+      "default_value": false
+    },
+    "machine_gcode_flavor": {
+      "default_value": "RepRap"
+    },
+    "layer_height": {
+      "default_value": 0.2
+    },
+    "layer_height_0": {
+      "default_value": 0.2
+    },
+    "wall_thickness": {
+      "default_value": 1
+    },
+    "top_bottom_thickness": {
+      "default_value": 1
+    },
+    "bottom_thickness": {
+      "default_value": 1
+    },
+    "material_print_temperature": {
+      "default_value": 200
+    },
+    "material_bed_temperature": {
+      "default_value": 0
+    },
+    "material_diameter": {
+      "default_value": 1.75
+    },
+    "speed_print": {
+      "default_value": 40
+    },
+    "speed_infill": {
+      "default_value": 70
+    },
+    "speed_wall": {
+      "default_value": 25
+    },
+    "speed_topbottom": {
+      "default_value": 15
+    },
+    "speed_travel": {
+      "default_value": 150
+    },
+    "speed_layer_0": {
+      "default_value": 30
+    },
+    "support_enable": {
+      "default_value": true
+    }
+  }
+}
\ No newline at end of file