From 986ff9b1694de6c3cdb0bf4af5a2fade183377a6 Mon Sep 17 00:00:00 2001 From: Paul Kuiper <46715907+pkuiper-ultimaker@users.noreply.github.com> Date: Thu, 4 Sep 2025 10:57:06 +0200 Subject: [PATCH 1/3] Print profile for Method Nylon in 1A, !C and LABS extruder. PP-577 --- .../definitions/ultimaker_method.def.json | 1 - .../ultimaker_method_base.def.json | 2 +- .../definitions/ultimaker_methodx.def.json | 1 - ...d_1a_um-nylon-175_0.2mm_highspeed.inst.cfg | 25 ++++++++ ...um-nylon-175_0.2mm_highspeedsolid.inst.cfg | 31 ++++++++++ ...ethod_1a_um-nylon-175_0.2mm_solid.inst.cfg | 22 +++++++ ...d_1c_um-nylon-175_0.2mm_highspeed.inst.cfg | 25 ++++++++ ...um-nylon-175_0.2mm_highspeedsolid.inst.cfg | 31 ++++++++++ ...ethod_1c_um-nylon-175_0.2mm_solid.inst.cfg | 22 +++++++ ...labs_um-nylon-175_0.2mm_highspeed.inst.cfg | 25 ++++++++ ...um-nylon-175_0.2mm_highspeedsolid.inst.cfg | 31 ++++++++++ ...hod_labs_um-nylon-175_0.2mm_solid.inst.cfg | 22 +++++++ ...x_1a_um-nylon-175_0.2mm_highspeed.inst.cfg | 25 ++++++++ ...um-nylon-175_0.2mm_highspeedsolid.inst.cfg | 31 ++++++++++ ...thodx_1a_um-nylon-175_0.2mm_solid.inst.cfg | 22 +++++++ ...x_1c_um-nylon-175_0.2mm_highspeed.inst.cfg | 25 ++++++++ ...um-nylon-175_0.2mm_highspeedsolid.inst.cfg | 31 ++++++++++ ...thodx_1c_um-nylon-175_0.2mm_solid.inst.cfg | 22 +++++++ ...labs_um-nylon-175_0.2mm_highspeed.inst.cfg | 25 ++++++++ ...um-nylon-175_0.2mm_highspeedsolid.inst.cfg | 31 ++++++++++ ...odx_labs_um-nylon-175_0.2mm_solid.inst.cfg | 22 +++++++ .../um_method_1a_um-nylon-175_0.2mm.inst.cfg | 58 +++++++++++++++++++ .../um_method_1c_um-nylon-175_0.2mm.inst.cfg | 58 +++++++++++++++++++ ...um_method_labs_um-nylon-175_0.2mm.inst.cfg | 58 +++++++++++++++++++ .../um_methodx_1a_um-nylon-175_0.2mm.inst.cfg | 58 +++++++++++++++++++ .../um_methodx_1c_um-nylon-175_0.2mm.inst.cfg | 58 +++++++++++++++++++ ...m_methodx_labs_um-nylon-175_0.2mm.inst.cfg | 58 +++++++++++++++++++ 27 files changed, 817 insertions(+), 3 deletions(-) create mode 100644 resources/intent/ultimaker_method/um_method_1a_um-nylon-175_0.2mm_highspeed.inst.cfg create mode 100644 resources/intent/ultimaker_method/um_method_1a_um-nylon-175_0.2mm_highspeedsolid.inst.cfg create mode 100644 resources/intent/ultimaker_method/um_method_1a_um-nylon-175_0.2mm_solid.inst.cfg create mode 100644 resources/intent/ultimaker_method/um_method_1c_um-nylon-175_0.2mm_highspeed.inst.cfg create mode 100644 resources/intent/ultimaker_method/um_method_1c_um-nylon-175_0.2mm_highspeedsolid.inst.cfg create mode 100644 resources/intent/ultimaker_method/um_method_1c_um-nylon-175_0.2mm_solid.inst.cfg create mode 100644 resources/intent/ultimaker_method/um_method_labs_um-nylon-175_0.2mm_highspeed.inst.cfg create mode 100644 resources/intent/ultimaker_method/um_method_labs_um-nylon-175_0.2mm_highspeedsolid.inst.cfg create mode 100644 resources/intent/ultimaker_method/um_method_labs_um-nylon-175_0.2mm_solid.inst.cfg create mode 100644 resources/intent/ultimaker_methodx/um_methodx_1a_um-nylon-175_0.2mm_highspeed.inst.cfg create mode 100644 resources/intent/ultimaker_methodx/um_methodx_1a_um-nylon-175_0.2mm_highspeedsolid.inst.cfg create mode 100644 resources/intent/ultimaker_methodx/um_methodx_1a_um-nylon-175_0.2mm_solid.inst.cfg create mode 100644 resources/intent/ultimaker_methodx/um_methodx_1c_um-nylon-175_0.2mm_highspeed.inst.cfg create mode 100644 resources/intent/ultimaker_methodx/um_methodx_1c_um-nylon-175_0.2mm_highspeedsolid.inst.cfg create mode 100644 resources/intent/ultimaker_methodx/um_methodx_1c_um-nylon-175_0.2mm_solid.inst.cfg create mode 100644 resources/intent/ultimaker_methodx/um_methodx_labs_um-nylon-175_0.2mm_highspeed.inst.cfg create mode 100644 resources/intent/ultimaker_methodx/um_methodx_labs_um-nylon-175_0.2mm_highspeedsolid.inst.cfg create mode 100644 resources/intent/ultimaker_methodx/um_methodx_labs_um-nylon-175_0.2mm_solid.inst.cfg create mode 100644 resources/quality/ultimaker_method/um_method_1a_um-nylon-175_0.2mm.inst.cfg create mode 100644 resources/quality/ultimaker_method/um_method_1c_um-nylon-175_0.2mm.inst.cfg create mode 100644 resources/quality/ultimaker_method/um_method_labs_um-nylon-175_0.2mm.inst.cfg create mode 100644 resources/quality/ultimaker_methodx/um_methodx_1a_um-nylon-175_0.2mm.inst.cfg create mode 100644 resources/quality/ultimaker_methodx/um_methodx_1c_um-nylon-175_0.2mm.inst.cfg create mode 100644 resources/quality/ultimaker_methodx/um_methodx_labs_um-nylon-175_0.2mm.inst.cfg diff --git a/resources/definitions/ultimaker_method.def.json b/resources/definitions/ultimaker_method.def.json index d2813ea8a3..c1a820f834 100644 --- a/resources/definitions/ultimaker_method.def.json +++ b/resources/definitions/ultimaker_method.def.json @@ -45,7 +45,6 @@ "ultimaker_bvoh_175", "ultimaker_cffpa_175", "ultimaker_cpe_175", - "ultimaker_nylon_175", "ultimaker_hips_175", "ultimaker_pc_175", "ultimaker_tpu_175", diff --git a/resources/definitions/ultimaker_method_base.def.json b/resources/definitions/ultimaker_method_base.def.json index e421b20529..ac37078571 100644 --- a/resources/definitions/ultimaker_method_base.def.json +++ b/resources/definitions/ultimaker_method_base.def.json @@ -701,7 +701,7 @@ 45 ] }, - "support_infill_rate": { "value": 20.0 }, + "support_infill_rate": { "value": "0 if support_structure == 'tree' else 20.0" }, "support_infill_sparse_thickness": { "value": "layer_height" }, "support_interface_enable": { "value": true }, "support_interface_height": { "value": "4*support_infill_sparse_thickness" }, diff --git a/resources/definitions/ultimaker_methodx.def.json b/resources/definitions/ultimaker_methodx.def.json index 37b11ad4ef..e5aa87afc1 100644 --- a/resources/definitions/ultimaker_methodx.def.json +++ b/resources/definitions/ultimaker_methodx.def.json @@ -44,7 +44,6 @@ "zyyx_pro_", "octofiber_", "fiberlogy_", - "ultimaker_nylon_175", "ultimaker_metallic_pla_175" ], "has_machine_materials": true, diff --git a/resources/intent/ultimaker_method/um_method_1a_um-nylon-175_0.2mm_highspeed.inst.cfg b/resources/intent/ultimaker_method/um_method_1a_um-nylon-175_0.2mm_highspeed.inst.cfg new file mode 100644 index 0000000000..a864337115 --- /dev/null +++ b/resources/intent/ultimaker_method/um_method_1a_um-nylon-175_0.2mm_highspeed.inst.cfg @@ -0,0 +1,25 @@ +[general] +definition = ultimaker_method +name = High Speed +version = 4 + +[metadata] +intent_category = highspeed +is_experimental = True +material = ultimaker_nylon_175 +quality_type = draft +setting_version = 25 +type = intent +variant = 1A + +[values] +acceleration_print = 3500 +bridge_wall_speed = 300 +cool_min_layer_time = 3 +infill_pattern = zigzag +jerk_print = 35 +speed_layer_0 = 55 +speed_print = 300 +speed_travel = 500 +support_pattern = zigzag + diff --git a/resources/intent/ultimaker_method/um_method_1a_um-nylon-175_0.2mm_highspeedsolid.inst.cfg b/resources/intent/ultimaker_method/um_method_1a_um-nylon-175_0.2mm_highspeedsolid.inst.cfg new file mode 100644 index 0000000000..9dd0d6c8fa --- /dev/null +++ b/resources/intent/ultimaker_method/um_method_1a_um-nylon-175_0.2mm_highspeedsolid.inst.cfg @@ -0,0 +1,31 @@ +[general] +definition = ultimaker_method +name = High Speed Solid +version = 4 + +[metadata] +intent_category = highspeedsolid +is_experimental = True +material = ultimaker_nylon_175 +quality_type = draft +setting_version = 25 +type = intent +variant = 1A + +[values] +acceleration_print = 3500 +bottom_thickness = =top_bottom_thickness +bridge_wall_speed = 300 +cool_min_layer_time = 3 +infill_angles = [45,135] +infill_material_flow = 97 +infill_pattern = zigzag +infill_sparse_density = 99 +jerk_print = 35 +speed_layer_0 = 55 +speed_print = 300 +speed_travel = 500 +support_pattern = zigzag +top_bottom_thickness = =layer_height * 2 +top_thickness = =top_bottom_thickness + diff --git a/resources/intent/ultimaker_method/um_method_1a_um-nylon-175_0.2mm_solid.inst.cfg b/resources/intent/ultimaker_method/um_method_1a_um-nylon-175_0.2mm_solid.inst.cfg new file mode 100644 index 0000000000..912d71d2eb --- /dev/null +++ b/resources/intent/ultimaker_method/um_method_1a_um-nylon-175_0.2mm_solid.inst.cfg @@ -0,0 +1,22 @@ +[general] +definition = ultimaker_method +name = Solid +version = 4 + +[metadata] +intent_category = solid +material = ultimaker_nylon_175 +quality_type = draft +setting_version = 25 +type = intent +variant = 1A + +[values] +bottom_thickness = =top_bottom_thickness +infill_angles = [45,135] +infill_material_flow = 97 +infill_pattern = zigzag +infill_sparse_density = 99 +top_bottom_thickness = =layer_height * 2 +top_thickness = =top_bottom_thickness + diff --git a/resources/intent/ultimaker_method/um_method_1c_um-nylon-175_0.2mm_highspeed.inst.cfg b/resources/intent/ultimaker_method/um_method_1c_um-nylon-175_0.2mm_highspeed.inst.cfg new file mode 100644 index 0000000000..8e9ae1594a --- /dev/null +++ b/resources/intent/ultimaker_method/um_method_1c_um-nylon-175_0.2mm_highspeed.inst.cfg @@ -0,0 +1,25 @@ +[general] +definition = ultimaker_method +name = High Speed +version = 4 + +[metadata] +intent_category = highspeed +is_experimental = True +material = ultimaker_nylon_175 +quality_type = draft +setting_version = 25 +type = intent +variant = 1C + +[values] +acceleration_print = 3500 +bridge_wall_speed = 300 +cool_min_layer_time = 3 +infill_pattern = zigzag +jerk_print = 35 +speed_layer_0 = 55 +speed_print = 300 +speed_travel = 500 +support_pattern = zigzag + diff --git a/resources/intent/ultimaker_method/um_method_1c_um-nylon-175_0.2mm_highspeedsolid.inst.cfg b/resources/intent/ultimaker_method/um_method_1c_um-nylon-175_0.2mm_highspeedsolid.inst.cfg new file mode 100644 index 0000000000..65918cdec0 --- /dev/null +++ b/resources/intent/ultimaker_method/um_method_1c_um-nylon-175_0.2mm_highspeedsolid.inst.cfg @@ -0,0 +1,31 @@ +[general] +definition = ultimaker_method +name = High Speed Solid +version = 4 + +[metadata] +intent_category = highspeedsolid +is_experimental = True +material = ultimaker_nylon_175 +quality_type = draft +setting_version = 25 +type = intent +variant = 1C + +[values] +acceleration_print = 3500 +bottom_thickness = =top_bottom_thickness +bridge_wall_speed = 300 +cool_min_layer_time = 3 +infill_angles = [45,135] +infill_material_flow = 97 +infill_pattern = zigzag +infill_sparse_density = 99 +jerk_print = 35 +speed_layer_0 = 55 +speed_print = 300 +speed_travel = 500 +support_pattern = zigzag +top_bottom_thickness = =layer_height * 2 +top_thickness = =top_bottom_thickness + diff --git a/resources/intent/ultimaker_method/um_method_1c_um-nylon-175_0.2mm_solid.inst.cfg b/resources/intent/ultimaker_method/um_method_1c_um-nylon-175_0.2mm_solid.inst.cfg new file mode 100644 index 0000000000..ed8949a519 --- /dev/null +++ b/resources/intent/ultimaker_method/um_method_1c_um-nylon-175_0.2mm_solid.inst.cfg @@ -0,0 +1,22 @@ +[general] +definition = ultimaker_method +name = Solid +version = 4 + +[metadata] +intent_category = solid +material = ultimaker_nylon_175 +quality_type = draft +setting_version = 25 +type = intent +variant = 1C + +[values] +bottom_thickness = =top_bottom_thickness +infill_angles = [45,135] +infill_material_flow = 97 +infill_pattern = zigzag +infill_sparse_density = 99 +top_bottom_thickness = =layer_height * 2 +top_thickness = =top_bottom_thickness + diff --git a/resources/intent/ultimaker_method/um_method_labs_um-nylon-175_0.2mm_highspeed.inst.cfg b/resources/intent/ultimaker_method/um_method_labs_um-nylon-175_0.2mm_highspeed.inst.cfg new file mode 100644 index 0000000000..c8e31af0be --- /dev/null +++ b/resources/intent/ultimaker_method/um_method_labs_um-nylon-175_0.2mm_highspeed.inst.cfg @@ -0,0 +1,25 @@ +[general] +definition = ultimaker_method +name = High Speed +version = 4 + +[metadata] +intent_category = highspeed +is_experimental = True +material = ultimaker_nylon_175 +quality_type = draft +setting_version = 25 +type = intent +variant = LABS + +[values] +acceleration_print = 3500 +bridge_wall_speed = 300 +cool_min_layer_time = 3 +infill_pattern = zigzag +jerk_print = 35 +speed_layer_0 = 55 +speed_print = 300 +speed_travel = 500 +support_pattern = zigzag + diff --git a/resources/intent/ultimaker_method/um_method_labs_um-nylon-175_0.2mm_highspeedsolid.inst.cfg b/resources/intent/ultimaker_method/um_method_labs_um-nylon-175_0.2mm_highspeedsolid.inst.cfg new file mode 100644 index 0000000000..94aa6c8267 --- /dev/null +++ b/resources/intent/ultimaker_method/um_method_labs_um-nylon-175_0.2mm_highspeedsolid.inst.cfg @@ -0,0 +1,31 @@ +[general] +definition = ultimaker_method +name = High Speed Solid +version = 4 + +[metadata] +intent_category = highspeedsolid +is_experimental = True +material = ultimaker_nylon_175 +quality_type = draft +setting_version = 25 +type = intent +variant = LABS + +[values] +acceleration_print = 3500 +bottom_thickness = =top_bottom_thickness +bridge_wall_speed = 300 +cool_min_layer_time = 3 +infill_angles = [45,135] +infill_material_flow = 97 +infill_pattern = zigzag +infill_sparse_density = 99 +jerk_print = 35 +speed_layer_0 = 55 +speed_print = 300 +speed_travel = 500 +support_pattern = zigzag +top_bottom_thickness = =layer_height * 2 +top_thickness = =top_bottom_thickness + diff --git a/resources/intent/ultimaker_method/um_method_labs_um-nylon-175_0.2mm_solid.inst.cfg b/resources/intent/ultimaker_method/um_method_labs_um-nylon-175_0.2mm_solid.inst.cfg new file mode 100644 index 0000000000..f77d77afa2 --- /dev/null +++ b/resources/intent/ultimaker_method/um_method_labs_um-nylon-175_0.2mm_solid.inst.cfg @@ -0,0 +1,22 @@ +[general] +definition = ultimaker_method +name = Solid +version = 4 + +[metadata] +intent_category = solid +material = ultimaker_nylon_175 +quality_type = draft +setting_version = 25 +type = intent +variant = LABS + +[values] +bottom_thickness = =top_bottom_thickness +infill_angles = [45,135] +infill_material_flow = 97 +infill_pattern = zigzag +infill_sparse_density = 99 +top_bottom_thickness = =layer_height * 2 +top_thickness = =top_bottom_thickness + diff --git a/resources/intent/ultimaker_methodx/um_methodx_1a_um-nylon-175_0.2mm_highspeed.inst.cfg b/resources/intent/ultimaker_methodx/um_methodx_1a_um-nylon-175_0.2mm_highspeed.inst.cfg new file mode 100644 index 0000000000..967aa0dbf8 --- /dev/null +++ b/resources/intent/ultimaker_methodx/um_methodx_1a_um-nylon-175_0.2mm_highspeed.inst.cfg @@ -0,0 +1,25 @@ +[general] +definition = ultimaker_methodx +name = High Speed +version = 4 + +[metadata] +intent_category = highspeed +is_experimental = True +material = ultimaker_nylon_175 +quality_type = draft +setting_version = 25 +type = intent +variant = 1A + +[values] +acceleration_print = 3500 +bridge_wall_speed = 300 +cool_min_layer_time = 3 +infill_pattern = zigzag +jerk_print = 35 +speed_layer_0 = 55 +speed_print = 300 +speed_travel = 500 +support_pattern = zigzag + diff --git a/resources/intent/ultimaker_methodx/um_methodx_1a_um-nylon-175_0.2mm_highspeedsolid.inst.cfg b/resources/intent/ultimaker_methodx/um_methodx_1a_um-nylon-175_0.2mm_highspeedsolid.inst.cfg new file mode 100644 index 0000000000..a08f2e1948 --- /dev/null +++ b/resources/intent/ultimaker_methodx/um_methodx_1a_um-nylon-175_0.2mm_highspeedsolid.inst.cfg @@ -0,0 +1,31 @@ +[general] +definition = ultimaker_methodx +name = High Speed Solid +version = 4 + +[metadata] +intent_category = highspeedsolid +is_experimental = True +material = ultimaker_nylon_175 +quality_type = draft +setting_version = 25 +type = intent +variant = 1A + +[values] +acceleration_print = 3500 +bottom_thickness = =top_bottom_thickness +bridge_wall_speed = 300 +cool_min_layer_time = 3 +infill_angles = [45,135] +infill_material_flow = 97 +infill_pattern = zigzag +infill_sparse_density = 99 +jerk_print = 35 +speed_layer_0 = 55 +speed_print = 300 +speed_travel = 500 +support_pattern = zigzag +top_bottom_thickness = =layer_height * 2 +top_thickness = =top_bottom_thickness + diff --git a/resources/intent/ultimaker_methodx/um_methodx_1a_um-nylon-175_0.2mm_solid.inst.cfg b/resources/intent/ultimaker_methodx/um_methodx_1a_um-nylon-175_0.2mm_solid.inst.cfg new file mode 100644 index 0000000000..e9d7188457 --- /dev/null +++ b/resources/intent/ultimaker_methodx/um_methodx_1a_um-nylon-175_0.2mm_solid.inst.cfg @@ -0,0 +1,22 @@ +[general] +definition = ultimaker_methodx +name = Solid +version = 4 + +[metadata] +intent_category = solid +material = ultimaker_nylon_175 +quality_type = draft +setting_version = 25 +type = intent +variant = 1A + +[values] +bottom_thickness = =top_bottom_thickness +infill_angles = [45,135] +infill_material_flow = 97 +infill_pattern = zigzag +infill_sparse_density = 99 +top_bottom_thickness = =layer_height * 2 +top_thickness = =top_bottom_thickness + diff --git a/resources/intent/ultimaker_methodx/um_methodx_1c_um-nylon-175_0.2mm_highspeed.inst.cfg b/resources/intent/ultimaker_methodx/um_methodx_1c_um-nylon-175_0.2mm_highspeed.inst.cfg new file mode 100644 index 0000000000..d31a6542b6 --- /dev/null +++ b/resources/intent/ultimaker_methodx/um_methodx_1c_um-nylon-175_0.2mm_highspeed.inst.cfg @@ -0,0 +1,25 @@ +[general] +definition = ultimaker_methodx +name = High Speed +version = 4 + +[metadata] +intent_category = highspeed +is_experimental = True +material = ultimaker_nylon_175 +quality_type = draft +setting_version = 25 +type = intent +variant = 1C + +[values] +acceleration_print = 3500 +bridge_wall_speed = 300 +cool_min_layer_time = 3 +infill_pattern = zigzag +jerk_print = 35 +speed_layer_0 = 55 +speed_print = 300 +speed_travel = 500 +support_pattern = zigzag + diff --git a/resources/intent/ultimaker_methodx/um_methodx_1c_um-nylon-175_0.2mm_highspeedsolid.inst.cfg b/resources/intent/ultimaker_methodx/um_methodx_1c_um-nylon-175_0.2mm_highspeedsolid.inst.cfg new file mode 100644 index 0000000000..29bd7371a0 --- /dev/null +++ b/resources/intent/ultimaker_methodx/um_methodx_1c_um-nylon-175_0.2mm_highspeedsolid.inst.cfg @@ -0,0 +1,31 @@ +[general] +definition = ultimaker_methodx +name = High Speed Solid +version = 4 + +[metadata] +intent_category = highspeedsolid +is_experimental = True +material = ultimaker_nylon_175 +quality_type = draft +setting_version = 25 +type = intent +variant = 1C + +[values] +acceleration_print = 3500 +bottom_thickness = =top_bottom_thickness +bridge_wall_speed = 300 +cool_min_layer_time = 3 +infill_angles = [45,135] +infill_material_flow = 97 +infill_pattern = zigzag +infill_sparse_density = 99 +jerk_print = 35 +speed_layer_0 = 55 +speed_print = 300 +speed_travel = 500 +support_pattern = zigzag +top_bottom_thickness = =layer_height * 2 +top_thickness = =top_bottom_thickness + diff --git a/resources/intent/ultimaker_methodx/um_methodx_1c_um-nylon-175_0.2mm_solid.inst.cfg b/resources/intent/ultimaker_methodx/um_methodx_1c_um-nylon-175_0.2mm_solid.inst.cfg new file mode 100644 index 0000000000..ae2bc39db8 --- /dev/null +++ b/resources/intent/ultimaker_methodx/um_methodx_1c_um-nylon-175_0.2mm_solid.inst.cfg @@ -0,0 +1,22 @@ +[general] +definition = ultimaker_methodx +name = Solid +version = 4 + +[metadata] +intent_category = solid +material = ultimaker_nylon_175 +quality_type = draft +setting_version = 25 +type = intent +variant = 1C + +[values] +bottom_thickness = =top_bottom_thickness +infill_angles = [45,135] +infill_material_flow = 97 +infill_pattern = zigzag +infill_sparse_density = 99 +top_bottom_thickness = =layer_height * 2 +top_thickness = =top_bottom_thickness + diff --git a/resources/intent/ultimaker_methodx/um_methodx_labs_um-nylon-175_0.2mm_highspeed.inst.cfg b/resources/intent/ultimaker_methodx/um_methodx_labs_um-nylon-175_0.2mm_highspeed.inst.cfg new file mode 100644 index 0000000000..e54a52ba05 --- /dev/null +++ b/resources/intent/ultimaker_methodx/um_methodx_labs_um-nylon-175_0.2mm_highspeed.inst.cfg @@ -0,0 +1,25 @@ +[general] +definition = ultimaker_methodx +name = High Speed +version = 4 + +[metadata] +intent_category = highspeed +is_experimental = True +material = ultimaker_nylon_175 +quality_type = draft +setting_version = 25 +type = intent +variant = LABS + +[values] +acceleration_print = 3500 +bridge_wall_speed = 300 +cool_min_layer_time = 3 +infill_pattern = zigzag +jerk_print = 35 +speed_layer_0 = 55 +speed_print = 300 +speed_travel = 500 +support_pattern = zigzag + diff --git a/resources/intent/ultimaker_methodx/um_methodx_labs_um-nylon-175_0.2mm_highspeedsolid.inst.cfg b/resources/intent/ultimaker_methodx/um_methodx_labs_um-nylon-175_0.2mm_highspeedsolid.inst.cfg new file mode 100644 index 0000000000..d1402a3140 --- /dev/null +++ b/resources/intent/ultimaker_methodx/um_methodx_labs_um-nylon-175_0.2mm_highspeedsolid.inst.cfg @@ -0,0 +1,31 @@ +[general] +definition = ultimaker_methodx +name = High Speed Solid +version = 4 + +[metadata] +intent_category = highspeedsolid +is_experimental = True +material = ultimaker_nylon_175 +quality_type = draft +setting_version = 25 +type = intent +variant = LABS + +[values] +acceleration_print = 3500 +bottom_thickness = =top_bottom_thickness +bridge_wall_speed = 300 +cool_min_layer_time = 3 +infill_angles = [45,135] +infill_material_flow = 97 +infill_pattern = zigzag +infill_sparse_density = 99 +jerk_print = 35 +speed_layer_0 = 55 +speed_print = 300 +speed_travel = 500 +support_pattern = zigzag +top_bottom_thickness = =layer_height * 2 +top_thickness = =top_bottom_thickness + diff --git a/resources/intent/ultimaker_methodx/um_methodx_labs_um-nylon-175_0.2mm_solid.inst.cfg b/resources/intent/ultimaker_methodx/um_methodx_labs_um-nylon-175_0.2mm_solid.inst.cfg new file mode 100644 index 0000000000..e5a0fe6dc8 --- /dev/null +++ b/resources/intent/ultimaker_methodx/um_methodx_labs_um-nylon-175_0.2mm_solid.inst.cfg @@ -0,0 +1,22 @@ +[general] +definition = ultimaker_methodx +name = Solid +version = 4 + +[metadata] +intent_category = solid +material = ultimaker_nylon_175 +quality_type = draft +setting_version = 25 +type = intent +variant = LABS + +[values] +bottom_thickness = =top_bottom_thickness +infill_angles = [45,135] +infill_material_flow = 97 +infill_pattern = zigzag +infill_sparse_density = 99 +top_bottom_thickness = =layer_height * 2 +top_thickness = =top_bottom_thickness + diff --git a/resources/quality/ultimaker_method/um_method_1a_um-nylon-175_0.2mm.inst.cfg b/resources/quality/ultimaker_method/um_method_1a_um-nylon-175_0.2mm.inst.cfg new file mode 100644 index 0000000000..13b5c6c4f1 --- /dev/null +++ b/resources/quality/ultimaker_method/um_method_1a_um-nylon-175_0.2mm.inst.cfg @@ -0,0 +1,58 @@ +[general] +definition = ultimaker_method +name = Fast +version = 4 + +[metadata] +material = ultimaker_nylon_175 +quality_type = draft +setting_version = 25 +type = quality +variant = 1A +weight = -2 + +[values] +cool_fan_enabled = True +cool_fan_speed = 0 +cool_fan_speed_max = 0 +cool_min_layer_time = 8 +cool_min_speed = 10 +cool_min_temperature = 250 +material_final_print_temperature = =default_material_print_temperature-5 +material_initial_print_temperature = =default_material_print_temperature-5 +raft_airgap = 0.3 +raft_base_flow = 105 +raft_base_line_width = 1.2 +raft_base_speed = 10 +raft_base_thickness = 0.6 +raft_interface_thickness = 0.25 +retraction_amount = 0.5 +retraction_min_travel = 3.2ƒ√ +small_skin_width = 3.6 +speed_prime_tower = =speed_print +speed_print = 50 +speed_roofing = =speed_print * 3/5 +speed_topbottom = =speed_roofing +speed_wall = =speed_print * 3/5 +speed_wall_0 = =speed_wall * 5/6 +speed_wall_x = =speed_wall +support_angle = 30 +support_bottom_density = 24 +support_bottom_distance = =layer_height +support_bottom_enable = False +support_bottom_line_width = 0.6 +support_bottom_stair_step_height = 0 +support_infill_rate = =0 if support_structure == tree else 12.0 +support_interface_height = 0.406 +support_interface_material_flow = 95 +support_interface_pattern = lines +support_line_width = =line_width * 0.75 +support_material_flow = 92 +support_roof_density = 50 +support_roof_height = =support_interface_height +support_structure = tree +support_supported_skin_fan_speed = 75 +support_wall_count = 1 +support_xy_distance = 0.3 +support_z_distance = 0.3 + diff --git a/resources/quality/ultimaker_method/um_method_1c_um-nylon-175_0.2mm.inst.cfg b/resources/quality/ultimaker_method/um_method_1c_um-nylon-175_0.2mm.inst.cfg new file mode 100644 index 0000000000..6a7fb34999 --- /dev/null +++ b/resources/quality/ultimaker_method/um_method_1c_um-nylon-175_0.2mm.inst.cfg @@ -0,0 +1,58 @@ +[general] +definition = ultimaker_method +name = Fast +version = 4 + +[metadata] +material = ultimaker_nylon_175 +quality_type = draft +setting_version = 25 +type = quality +variant = 1C +weight = -2 + +[values] +cool_fan_enabled = True +cool_fan_speed = 0 +cool_fan_speed_max = 0 +cool_min_layer_time = 8 +cool_min_speed = 10 +cool_min_temperature = 250 +material_final_print_temperature = =default_material_print_temperature-5 +material_initial_print_temperature = =default_material_print_temperature-5 +raft_airgap = 0.3 +raft_base_flow = 105 +raft_base_line_width = 1.2 +raft_base_speed = 10 +raft_base_thickness = 0.6 +raft_interface_thickness = 0.25 +retraction_amount = 0.5 +retraction_min_travel = 3.2ƒ√ +small_skin_width = 3.6 +speed_prime_tower = =speed_print +speed_print = 50 +speed_roofing = =speed_print * 3/5 +speed_topbottom = =speed_roofing +speed_wall = =speed_print * 3/5 +speed_wall_0 = =speed_wall * 5/6 +speed_wall_x = =speed_wall +support_angle = 30 +support_bottom_density = 24 +support_bottom_distance = =layer_height +support_bottom_enable = False +support_bottom_line_width = 0.6 +support_bottom_stair_step_height = 0 +support_infill_rate = =0 if support_structure == tree else 12.0 +support_interface_height = 0.406 +support_interface_material_flow = 95 +support_interface_pattern = lines +support_line_width = =line_width * 0.75 +support_material_flow = 92 +support_roof_density = 50 +support_roof_height = =support_interface_height +support_structure = tree +support_supported_skin_fan_speed = 75 +support_wall_count = 1 +support_xy_distance = 0.3 +support_z_distance = 0.3 + diff --git a/resources/quality/ultimaker_method/um_method_labs_um-nylon-175_0.2mm.inst.cfg b/resources/quality/ultimaker_method/um_method_labs_um-nylon-175_0.2mm.inst.cfg new file mode 100644 index 0000000000..5b85e94356 --- /dev/null +++ b/resources/quality/ultimaker_method/um_method_labs_um-nylon-175_0.2mm.inst.cfg @@ -0,0 +1,58 @@ +[general] +definition = ultimaker_method +name = Fast +version = 4 + +[metadata] +material = ultimaker_nylon_175 +quality_type = draft +setting_version = 25 +type = quality +variant = LABS +weight = -2 + +[values] +cool_fan_enabled = True +cool_fan_speed = 0 +cool_fan_speed_max = 0 +cool_min_layer_time = 8 +cool_min_speed = 10 +cool_min_temperature = 250 +material_final_print_temperature = =default_material_print_temperature-5 +material_initial_print_temperature = =default_material_print_temperature-5 +raft_airgap = 0.3 +raft_base_flow = 105 +raft_base_line_width = 1.2 +raft_base_speed = 10 +raft_base_thickness = 0.6 +raft_interface_thickness = 0.25 +retraction_amount = 0.5 +retraction_min_travel = 3.2ƒ√ +small_skin_width = 3.6 +speed_prime_tower = =speed_print +speed_print = 50 +speed_roofing = =speed_print * 3/5 +speed_topbottom = =speed_roofing +speed_wall = =speed_print * 3/5 +speed_wall_0 = =speed_wall * 5/6 +speed_wall_x = =speed_wall +support_angle = 30 +support_bottom_density = 24 +support_bottom_distance = =layer_height +support_bottom_enable = False +support_bottom_line_width = 0.6 +support_bottom_stair_step_height = 0 +support_infill_rate = =0 if support_structure == tree else 12.0 +support_interface_height = 0.406 +support_interface_material_flow = 95 +support_interface_pattern = lines +support_line_width = =line_width * 0.75 +support_material_flow = 92 +support_roof_density = 50 +support_roof_height = =support_interface_height +support_structure = tree +support_supported_skin_fan_speed = 75 +support_wall_count = 1 +support_xy_distance = 0.3 +support_z_distance = 0.3 + diff --git a/resources/quality/ultimaker_methodx/um_methodx_1a_um-nylon-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodx/um_methodx_1a_um-nylon-175_0.2mm.inst.cfg new file mode 100644 index 0000000000..dd622e65bf --- /dev/null +++ b/resources/quality/ultimaker_methodx/um_methodx_1a_um-nylon-175_0.2mm.inst.cfg @@ -0,0 +1,58 @@ +[general] +definition = ultimaker_methodx +name = Fast +version = 4 + +[metadata] +material = ultimaker_nylon_175 +quality_type = draft +setting_version = 25 +type = quality +variant = 1A +weight = -2 + +[values] +cool_fan_enabled = True +cool_fan_speed = 0 +cool_fan_speed_max = 0 +cool_min_layer_time = 8 +cool_min_speed = 10 +cool_min_temperature = 250 +material_final_print_temperature = =default_material_print_temperature-5 +material_initial_print_temperature = =default_material_print_temperature-5 +raft_airgap = 0.3 +raft_base_flow = 105 +raft_base_line_width = 1.2 +raft_base_speed = 10 +raft_base_thickness = 0.6 +raft_interface_thickness = 0.25 +retraction_amount = 0.5 +retraction_min_travel = 3.2ƒ√ +small_skin_width = 3.6 +speed_prime_tower = =speed_print +speed_print = 50 +speed_roofing = =speed_print * 3/5 +speed_topbottom = =speed_roofing +speed_wall = =speed_print * 3/5 +speed_wall_0 = =speed_wall * 5/6 +speed_wall_x = =speed_wall +support_angle = 30 +support_bottom_density = 24 +support_bottom_distance = =layer_height +support_bottom_enable = False +support_bottom_line_width = 0.6 +support_bottom_stair_step_height = 0 +support_infill_rate = =0 if support_structure == tree else 12.0 +support_interface_height = 0.406 +support_interface_material_flow = 95 +support_interface_pattern = lines +support_line_width = =line_width * 0.75 +support_material_flow = 92 +support_roof_density = 50 +support_roof_height = =support_interface_height +support_structure = tree +support_supported_skin_fan_speed = 75 +support_wall_count = 1 +support_xy_distance = 0.3 +support_z_distance = 0.3 + diff --git a/resources/quality/ultimaker_methodx/um_methodx_1c_um-nylon-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodx/um_methodx_1c_um-nylon-175_0.2mm.inst.cfg new file mode 100644 index 0000000000..8aef5be946 --- /dev/null +++ b/resources/quality/ultimaker_methodx/um_methodx_1c_um-nylon-175_0.2mm.inst.cfg @@ -0,0 +1,58 @@ +[general] +definition = ultimaker_methodx +name = Fast +version = 4 + +[metadata] +material = ultimaker_nylon_175 +quality_type = draft +setting_version = 25 +type = quality +variant = 1C +weight = -2 + +[values] +cool_fan_enabled = True +cool_fan_speed = 0 +cool_fan_speed_max = 0 +cool_min_layer_time = 8 +cool_min_speed = 10 +cool_min_temperature = 250 +material_final_print_temperature = =default_material_print_temperature-5 +material_initial_print_temperature = =default_material_print_temperature-5 +raft_airgap = 0.3 +raft_base_flow = 105 +raft_base_line_width = 1.2 +raft_base_speed = 10 +raft_base_thickness = 0.6 +raft_interface_thickness = 0.25 +retraction_amount = 0.5 +retraction_min_travel = 3.2ƒ√ +small_skin_width = 3.6 +speed_prime_tower = =speed_print +speed_print = 50 +speed_roofing = =speed_print * 3/5 +speed_topbottom = =speed_roofing +speed_wall = =speed_print * 3/5 +speed_wall_0 = =speed_wall * 5/6 +speed_wall_x = =speed_wall +support_angle = 30 +support_bottom_density = 24 +support_bottom_distance = =layer_height +support_bottom_enable = False +support_bottom_line_width = 0.6 +support_bottom_stair_step_height = 0 +support_infill_rate = =0 if support_structure == tree else 12.0 +support_interface_height = 0.406 +support_interface_material_flow = 95 +support_interface_pattern = lines +support_line_width = =line_width * 0.75 +support_material_flow = 92 +support_roof_density = 50 +support_roof_height = =support_interface_height +support_structure = tree +support_supported_skin_fan_speed = 75 +support_wall_count = 1 +support_xy_distance = 0.3 +support_z_distance = 0.3 + diff --git a/resources/quality/ultimaker_methodx/um_methodx_labs_um-nylon-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodx/um_methodx_labs_um-nylon-175_0.2mm.inst.cfg new file mode 100644 index 0000000000..08e5a9f7a2 --- /dev/null +++ b/resources/quality/ultimaker_methodx/um_methodx_labs_um-nylon-175_0.2mm.inst.cfg @@ -0,0 +1,58 @@ +[general] +definition = ultimaker_methodx +name = Fast +version = 4 + +[metadata] +material = ultimaker_nylon_175 +quality_type = draft +setting_version = 25 +type = quality +variant = LABS +weight = -2 + +[values] +cool_fan_enabled = True +cool_fan_speed = 0 +cool_fan_speed_max = 0 +cool_min_layer_time = 8 +cool_min_speed = 10 +cool_min_temperature = 250 +material_final_print_temperature = =default_material_print_temperature-5 +material_initial_print_temperature = =default_material_print_temperature-5 +raft_airgap = 0.3 +raft_base_flow = 105 +raft_base_line_width = 1.2 +raft_base_speed = 10 +raft_base_thickness = 0.6 +raft_interface_thickness = 0.25 +retraction_amount = 0.5 +retraction_min_travel = 3.2ƒ√ +small_skin_width = 3.6 +speed_prime_tower = =speed_print +speed_print = 50 +speed_roofing = =speed_print * 3/5 +speed_topbottom = =speed_roofing +speed_wall = =speed_print * 3/5 +speed_wall_0 = =speed_wall * 5/6 +speed_wall_x = =speed_wall +support_angle = 30 +support_bottom_density = 24 +support_bottom_distance = =layer_height +support_bottom_enable = False +support_bottom_line_width = 0.6 +support_bottom_stair_step_height = 0 +support_infill_rate = =0 if support_structure == tree else 12.0 +support_interface_height = 0.406 +support_interface_material_flow = 95 +support_interface_pattern = lines +support_line_width = =line_width * 0.75 +support_material_flow = 92 +support_roof_density = 50 +support_roof_height = =support_interface_height +support_structure = tree +support_supported_skin_fan_speed = 75 +support_wall_count = 1 +support_xy_distance = 0.3 +support_z_distance = 0.3 + From 25c494a75c4c80aeeb31ab48b984bfb80c40defe Mon Sep 17 00:00:00 2001 From: Paul Kuiper <46715907+pkuiper-ultimaker@users.noreply.github.com> Date: Mon, 8 Sep 2025 10:34:12 +0200 Subject: [PATCH 2/3] Increased support z distance for better release of self support. PP-577 --- .../ultimaker_method/um_method_1a_um-nylon-175_0.2mm.inst.cfg | 4 ++-- .../ultimaker_method/um_method_1c_um-nylon-175_0.2mm.inst.cfg | 4 ++-- .../um_method_labs_um-nylon-175_0.2mm.inst.cfg | 4 ++-- .../um_methodx_1a_um-nylon-175_0.2mm.inst.cfg | 4 ++-- .../um_methodx_1c_um-nylon-175_0.2mm.inst.cfg | 4 ++-- .../um_methodx_labs_um-nylon-175_0.2mm.inst.cfg | 4 ++-- 6 files changed, 12 insertions(+), 12 deletions(-) diff --git a/resources/quality/ultimaker_method/um_method_1a_um-nylon-175_0.2mm.inst.cfg b/resources/quality/ultimaker_method/um_method_1a_um-nylon-175_0.2mm.inst.cfg index 13b5c6c4f1..6859b6c0b2 100644 --- a/resources/quality/ultimaker_method/um_method_1a_um-nylon-175_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_method/um_method_1a_um-nylon-175_0.2mm.inst.cfg @@ -27,7 +27,7 @@ raft_base_speed = 10 raft_base_thickness = 0.6 raft_interface_thickness = 0.25 retraction_amount = 0.5 -retraction_min_travel = 3.2ƒ√ +retraction_min_travel = 3.2 small_skin_width = 3.6 speed_prime_tower = =speed_print speed_print = 50 @@ -54,5 +54,5 @@ support_structure = tree support_supported_skin_fan_speed = 75 support_wall_count = 1 support_xy_distance = 0.3 -support_z_distance = 0.3 +support_z_distance = =layer_height*2 diff --git a/resources/quality/ultimaker_method/um_method_1c_um-nylon-175_0.2mm.inst.cfg b/resources/quality/ultimaker_method/um_method_1c_um-nylon-175_0.2mm.inst.cfg index 6a7fb34999..57a0c78003 100644 --- a/resources/quality/ultimaker_method/um_method_1c_um-nylon-175_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_method/um_method_1c_um-nylon-175_0.2mm.inst.cfg @@ -27,7 +27,7 @@ raft_base_speed = 10 raft_base_thickness = 0.6 raft_interface_thickness = 0.25 retraction_amount = 0.5 -retraction_min_travel = 3.2ƒ√ +retraction_min_travel = 3.2 small_skin_width = 3.6 speed_prime_tower = =speed_print speed_print = 50 @@ -54,5 +54,5 @@ support_structure = tree support_supported_skin_fan_speed = 75 support_wall_count = 1 support_xy_distance = 0.3 -support_z_distance = 0.3 +support_z_distance = =layer_height*2 diff --git a/resources/quality/ultimaker_method/um_method_labs_um-nylon-175_0.2mm.inst.cfg b/resources/quality/ultimaker_method/um_method_labs_um-nylon-175_0.2mm.inst.cfg index 5b85e94356..cf87c5c74b 100644 --- a/resources/quality/ultimaker_method/um_method_labs_um-nylon-175_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_method/um_method_labs_um-nylon-175_0.2mm.inst.cfg @@ -27,7 +27,7 @@ raft_base_speed = 10 raft_base_thickness = 0.6 raft_interface_thickness = 0.25 retraction_amount = 0.5 -retraction_min_travel = 3.2ƒ√ +retraction_min_travel = 3.2 small_skin_width = 3.6 speed_prime_tower = =speed_print speed_print = 50 @@ -54,5 +54,5 @@ support_structure = tree support_supported_skin_fan_speed = 75 support_wall_count = 1 support_xy_distance = 0.3 -support_z_distance = 0.3 +support_z_distance = =layer_height*2 diff --git a/resources/quality/ultimaker_methodx/um_methodx_1a_um-nylon-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodx/um_methodx_1a_um-nylon-175_0.2mm.inst.cfg index dd622e65bf..e2f294f391 100644 --- a/resources/quality/ultimaker_methodx/um_methodx_1a_um-nylon-175_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_methodx/um_methodx_1a_um-nylon-175_0.2mm.inst.cfg @@ -27,7 +27,7 @@ raft_base_speed = 10 raft_base_thickness = 0.6 raft_interface_thickness = 0.25 retraction_amount = 0.5 -retraction_min_travel = 3.2ƒ√ +retraction_min_travel = 3.2 small_skin_width = 3.6 speed_prime_tower = =speed_print speed_print = 50 @@ -54,5 +54,5 @@ support_structure = tree support_supported_skin_fan_speed = 75 support_wall_count = 1 support_xy_distance = 0.3 -support_z_distance = 0.3 +support_z_distance = =layer_height*2 diff --git a/resources/quality/ultimaker_methodx/um_methodx_1c_um-nylon-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodx/um_methodx_1c_um-nylon-175_0.2mm.inst.cfg index 8aef5be946..788d768ff2 100644 --- a/resources/quality/ultimaker_methodx/um_methodx_1c_um-nylon-175_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_methodx/um_methodx_1c_um-nylon-175_0.2mm.inst.cfg @@ -27,7 +27,7 @@ raft_base_speed = 10 raft_base_thickness = 0.6 raft_interface_thickness = 0.25 retraction_amount = 0.5 -retraction_min_travel = 3.2ƒ√ +retraction_min_travel = 3.2 small_skin_width = 3.6 speed_prime_tower = =speed_print speed_print = 50 @@ -54,5 +54,5 @@ support_structure = tree support_supported_skin_fan_speed = 75 support_wall_count = 1 support_xy_distance = 0.3 -support_z_distance = 0.3 +support_z_distance = =layer_height*2 diff --git a/resources/quality/ultimaker_methodx/um_methodx_labs_um-nylon-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodx/um_methodx_labs_um-nylon-175_0.2mm.inst.cfg index 08e5a9f7a2..d5f520eb71 100644 --- a/resources/quality/ultimaker_methodx/um_methodx_labs_um-nylon-175_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_methodx/um_methodx_labs_um-nylon-175_0.2mm.inst.cfg @@ -27,7 +27,7 @@ raft_base_speed = 10 raft_base_thickness = 0.6 raft_interface_thickness = 0.25 retraction_amount = 0.5 -retraction_min_travel = 3.2ƒ√ +retraction_min_travel = 3.2 small_skin_width = 3.6 speed_prime_tower = =speed_print speed_print = 50 @@ -54,5 +54,5 @@ support_structure = tree support_supported_skin_fan_speed = 75 support_wall_count = 1 support_xy_distance = 0.3 -support_z_distance = 0.3 +support_z_distance = =layer_height*2 From b5908c173c57317fe866341dc002d89d89042a2f Mon Sep 17 00:00:00 2001 From: Paul Kuiper <46715907+pkuiper-ultimaker@users.noreply.github.com> Date: Thu, 11 Sep 2025 08:29:02 +0200 Subject: [PATCH 3/3] Lowered prime tower speed in high speed intents. Removed high speed intents for Method. Fixed bug in support infill rate formula (forgot string quotes) PP-577 --- ...d_1a_um-nylon-175_0.2mm_highspeed.inst.cfg | 25 --------------- ...um-nylon-175_0.2mm_highspeedsolid.inst.cfg | 31 ------------------- ...d_1c_um-nylon-175_0.2mm_highspeed.inst.cfg | 25 --------------- ...um-nylon-175_0.2mm_highspeedsolid.inst.cfg | 31 ------------------- ...labs_um-nylon-175_0.2mm_highspeed.inst.cfg | 25 --------------- ...um-nylon-175_0.2mm_highspeedsolid.inst.cfg | 31 ------------------- ...x_1a_um-nylon-175_0.2mm_highspeed.inst.cfg | 25 --------------- ...um-nylon-175_0.2mm_highspeedsolid.inst.cfg | 31 ------------------- ...dx_1c_um-absr-175_0.2mm_highspeed.inst.cfg | 1 + ..._um-absr-175_0.2mm_highspeedsolid.inst.cfg | 1 + ...x_1c_um-nylon-175_0.2mm_highspeed.inst.cfg | 25 --------------- ...um-nylon-175_0.2mm_highspeedsolid.inst.cfg | 31 ------------------- ...x_1xa_um-absr-175_0.2mm_highspeed.inst.cfg | 1 + ..._um-absr-175_0.2mm_highspeedsolid.inst.cfg | 1 + ..._labs_um-absr-175_0.2mm_highspeed.inst.cfg | 1 + ..._um-absr-175_0.2mm_highspeedsolid.inst.cfg | 1 + ...labs_um-nylon-175_0.2mm_highspeed.inst.cfg | 25 --------------- ...um-nylon-175_0.2mm_highspeedsolid.inst.cfg | 31 ------------------- ...xl_1c_um-absr-175_0.2mm_highspeed.inst.cfg | 1 + ..._um-absr-175_0.2mm_highspeedsolid.inst.cfg | 1 + ...l_1xa_um-absr-175_0.2mm_highspeed.inst.cfg | 1 + ..._um-absr-175_0.2mm_highspeedsolid.inst.cfg | 1 + ..._labs_um-absr-175_0.2mm_highspeed.inst.cfg | 1 + ..._um-absr-175_0.2mm_highspeedsolid.inst.cfg | 1 + .../um_method_1a_um-nylon-175_0.2mm.inst.cfg | 2 +- .../um_method_1c_um-nylon-175_0.2mm.inst.cfg | 2 +- ...um_method_labs_um-nylon-175_0.2mm.inst.cfg | 2 +- .../um_methodx_1a_um-nylon-175_0.2mm.inst.cfg | 2 +- .../um_methodx_1c_um-nylon-175_0.2mm.inst.cfg | 2 +- ...m_methodx_labs_um-nylon-175_0.2mm.inst.cfg | 2 +- 30 files changed, 18 insertions(+), 342 deletions(-) delete mode 100644 resources/intent/ultimaker_method/um_method_1a_um-nylon-175_0.2mm_highspeed.inst.cfg delete mode 100644 resources/intent/ultimaker_method/um_method_1a_um-nylon-175_0.2mm_highspeedsolid.inst.cfg delete mode 100644 resources/intent/ultimaker_method/um_method_1c_um-nylon-175_0.2mm_highspeed.inst.cfg delete mode 100644 resources/intent/ultimaker_method/um_method_1c_um-nylon-175_0.2mm_highspeedsolid.inst.cfg delete mode 100644 resources/intent/ultimaker_method/um_method_labs_um-nylon-175_0.2mm_highspeed.inst.cfg delete mode 100644 resources/intent/ultimaker_method/um_method_labs_um-nylon-175_0.2mm_highspeedsolid.inst.cfg delete mode 100644 resources/intent/ultimaker_methodx/um_methodx_1a_um-nylon-175_0.2mm_highspeed.inst.cfg delete mode 100644 resources/intent/ultimaker_methodx/um_methodx_1a_um-nylon-175_0.2mm_highspeedsolid.inst.cfg delete mode 100644 resources/intent/ultimaker_methodx/um_methodx_1c_um-nylon-175_0.2mm_highspeed.inst.cfg delete mode 100644 resources/intent/ultimaker_methodx/um_methodx_1c_um-nylon-175_0.2mm_highspeedsolid.inst.cfg delete mode 100644 resources/intent/ultimaker_methodx/um_methodx_labs_um-nylon-175_0.2mm_highspeed.inst.cfg delete mode 100644 resources/intent/ultimaker_methodx/um_methodx_labs_um-nylon-175_0.2mm_highspeedsolid.inst.cfg diff --git a/resources/intent/ultimaker_method/um_method_1a_um-nylon-175_0.2mm_highspeed.inst.cfg b/resources/intent/ultimaker_method/um_method_1a_um-nylon-175_0.2mm_highspeed.inst.cfg deleted file mode 100644 index a864337115..0000000000 --- a/resources/intent/ultimaker_method/um_method_1a_um-nylon-175_0.2mm_highspeed.inst.cfg +++ /dev/null @@ -1,25 +0,0 @@ -[general] -definition = ultimaker_method -name = High Speed -version = 4 - -[metadata] -intent_category = highspeed -is_experimental = True -material = ultimaker_nylon_175 -quality_type = draft -setting_version = 25 -type = intent -variant = 1A - -[values] -acceleration_print = 3500 -bridge_wall_speed = 300 -cool_min_layer_time = 3 -infill_pattern = zigzag -jerk_print = 35 -speed_layer_0 = 55 -speed_print = 300 -speed_travel = 500 -support_pattern = zigzag - diff --git a/resources/intent/ultimaker_method/um_method_1a_um-nylon-175_0.2mm_highspeedsolid.inst.cfg b/resources/intent/ultimaker_method/um_method_1a_um-nylon-175_0.2mm_highspeedsolid.inst.cfg deleted file mode 100644 index 9dd0d6c8fa..0000000000 --- a/resources/intent/ultimaker_method/um_method_1a_um-nylon-175_0.2mm_highspeedsolid.inst.cfg +++ /dev/null @@ -1,31 +0,0 @@ -[general] -definition = ultimaker_method -name = High Speed Solid -version = 4 - -[metadata] -intent_category = highspeedsolid -is_experimental = True -material = ultimaker_nylon_175 -quality_type = draft -setting_version = 25 -type = intent -variant = 1A - -[values] -acceleration_print = 3500 -bottom_thickness = =top_bottom_thickness -bridge_wall_speed = 300 -cool_min_layer_time = 3 -infill_angles = [45,135] -infill_material_flow = 97 -infill_pattern = zigzag -infill_sparse_density = 99 -jerk_print = 35 -speed_layer_0 = 55 -speed_print = 300 -speed_travel = 500 -support_pattern = zigzag -top_bottom_thickness = =layer_height * 2 -top_thickness = =top_bottom_thickness - diff --git a/resources/intent/ultimaker_method/um_method_1c_um-nylon-175_0.2mm_highspeed.inst.cfg b/resources/intent/ultimaker_method/um_method_1c_um-nylon-175_0.2mm_highspeed.inst.cfg deleted file mode 100644 index 8e9ae1594a..0000000000 --- a/resources/intent/ultimaker_method/um_method_1c_um-nylon-175_0.2mm_highspeed.inst.cfg +++ /dev/null @@ -1,25 +0,0 @@ -[general] -definition = ultimaker_method -name = High Speed -version = 4 - -[metadata] -intent_category = highspeed -is_experimental = True -material = ultimaker_nylon_175 -quality_type = draft -setting_version = 25 -type = intent -variant = 1C - -[values] -acceleration_print = 3500 -bridge_wall_speed = 300 -cool_min_layer_time = 3 -infill_pattern = zigzag -jerk_print = 35 -speed_layer_0 = 55 -speed_print = 300 -speed_travel = 500 -support_pattern = zigzag - diff --git a/resources/intent/ultimaker_method/um_method_1c_um-nylon-175_0.2mm_highspeedsolid.inst.cfg b/resources/intent/ultimaker_method/um_method_1c_um-nylon-175_0.2mm_highspeedsolid.inst.cfg deleted file mode 100644 index 65918cdec0..0000000000 --- a/resources/intent/ultimaker_method/um_method_1c_um-nylon-175_0.2mm_highspeedsolid.inst.cfg +++ /dev/null @@ -1,31 +0,0 @@ -[general] -definition = ultimaker_method -name = High Speed Solid -version = 4 - -[metadata] -intent_category = highspeedsolid -is_experimental = True -material = ultimaker_nylon_175 -quality_type = draft -setting_version = 25 -type = intent -variant = 1C - -[values] -acceleration_print = 3500 -bottom_thickness = =top_bottom_thickness -bridge_wall_speed = 300 -cool_min_layer_time = 3 -infill_angles = [45,135] -infill_material_flow = 97 -infill_pattern = zigzag -infill_sparse_density = 99 -jerk_print = 35 -speed_layer_0 = 55 -speed_print = 300 -speed_travel = 500 -support_pattern = zigzag -top_bottom_thickness = =layer_height * 2 -top_thickness = =top_bottom_thickness - diff --git a/resources/intent/ultimaker_method/um_method_labs_um-nylon-175_0.2mm_highspeed.inst.cfg b/resources/intent/ultimaker_method/um_method_labs_um-nylon-175_0.2mm_highspeed.inst.cfg deleted file mode 100644 index c8e31af0be..0000000000 --- a/resources/intent/ultimaker_method/um_method_labs_um-nylon-175_0.2mm_highspeed.inst.cfg +++ /dev/null @@ -1,25 +0,0 @@ -[general] -definition = ultimaker_method -name = High Speed -version = 4 - -[metadata] -intent_category = highspeed -is_experimental = True -material = ultimaker_nylon_175 -quality_type = draft -setting_version = 25 -type = intent -variant = LABS - -[values] -acceleration_print = 3500 -bridge_wall_speed = 300 -cool_min_layer_time = 3 -infill_pattern = zigzag -jerk_print = 35 -speed_layer_0 = 55 -speed_print = 300 -speed_travel = 500 -support_pattern = zigzag - diff --git a/resources/intent/ultimaker_method/um_method_labs_um-nylon-175_0.2mm_highspeedsolid.inst.cfg b/resources/intent/ultimaker_method/um_method_labs_um-nylon-175_0.2mm_highspeedsolid.inst.cfg deleted file mode 100644 index 94aa6c8267..0000000000 --- a/resources/intent/ultimaker_method/um_method_labs_um-nylon-175_0.2mm_highspeedsolid.inst.cfg +++ /dev/null @@ -1,31 +0,0 @@ -[general] -definition = ultimaker_method -name = High Speed Solid -version = 4 - -[metadata] -intent_category = highspeedsolid -is_experimental = True -material = ultimaker_nylon_175 -quality_type = draft -setting_version = 25 -type = intent -variant = LABS - -[values] -acceleration_print = 3500 -bottom_thickness = =top_bottom_thickness -bridge_wall_speed = 300 -cool_min_layer_time = 3 -infill_angles = [45,135] -infill_material_flow = 97 -infill_pattern = zigzag -infill_sparse_density = 99 -jerk_print = 35 -speed_layer_0 = 55 -speed_print = 300 -speed_travel = 500 -support_pattern = zigzag -top_bottom_thickness = =layer_height * 2 -top_thickness = =top_bottom_thickness - diff --git a/resources/intent/ultimaker_methodx/um_methodx_1a_um-nylon-175_0.2mm_highspeed.inst.cfg b/resources/intent/ultimaker_methodx/um_methodx_1a_um-nylon-175_0.2mm_highspeed.inst.cfg deleted file mode 100644 index 967aa0dbf8..0000000000 --- a/resources/intent/ultimaker_methodx/um_methodx_1a_um-nylon-175_0.2mm_highspeed.inst.cfg +++ /dev/null @@ -1,25 +0,0 @@ -[general] -definition = ultimaker_methodx -name = High Speed -version = 4 - -[metadata] -intent_category = highspeed -is_experimental = True -material = ultimaker_nylon_175 -quality_type = draft -setting_version = 25 -type = intent -variant = 1A - -[values] -acceleration_print = 3500 -bridge_wall_speed = 300 -cool_min_layer_time = 3 -infill_pattern = zigzag -jerk_print = 35 -speed_layer_0 = 55 -speed_print = 300 -speed_travel = 500 -support_pattern = zigzag - diff --git a/resources/intent/ultimaker_methodx/um_methodx_1a_um-nylon-175_0.2mm_highspeedsolid.inst.cfg b/resources/intent/ultimaker_methodx/um_methodx_1a_um-nylon-175_0.2mm_highspeedsolid.inst.cfg deleted file mode 100644 index a08f2e1948..0000000000 --- a/resources/intent/ultimaker_methodx/um_methodx_1a_um-nylon-175_0.2mm_highspeedsolid.inst.cfg +++ /dev/null @@ -1,31 +0,0 @@ -[general] -definition = ultimaker_methodx -name = High Speed Solid -version = 4 - -[metadata] -intent_category = highspeedsolid -is_experimental = True -material = ultimaker_nylon_175 -quality_type = draft -setting_version = 25 -type = intent -variant = 1A - -[values] -acceleration_print = 3500 -bottom_thickness = =top_bottom_thickness -bridge_wall_speed = 300 -cool_min_layer_time = 3 -infill_angles = [45,135] -infill_material_flow = 97 -infill_pattern = zigzag -infill_sparse_density = 99 -jerk_print = 35 -speed_layer_0 = 55 -speed_print = 300 -speed_travel = 500 -support_pattern = zigzag -top_bottom_thickness = =layer_height * 2 -top_thickness = =top_bottom_thickness - diff --git a/resources/intent/ultimaker_methodx/um_methodx_1c_um-absr-175_0.2mm_highspeed.inst.cfg b/resources/intent/ultimaker_methodx/um_methodx_1c_um-absr-175_0.2mm_highspeed.inst.cfg index f5a00d9db1..52345bc4c6 100644 --- a/resources/intent/ultimaker_methodx/um_methodx_1c_um-absr-175_0.2mm_highspeed.inst.cfg +++ b/resources/intent/ultimaker_methodx/um_methodx_1c_um-absr-175_0.2mm_highspeed.inst.cfg @@ -22,6 +22,7 @@ cool_min_temperature = 245.0 infill_pattern = zigzag jerk_print = 35 speed_layer_0 = 55 +speed_prime_tower = =speed_print/5 speed_print = 300 speed_support = 100 speed_support_interface = 75 diff --git a/resources/intent/ultimaker_methodx/um_methodx_1c_um-absr-175_0.2mm_highspeedsolid.inst.cfg b/resources/intent/ultimaker_methodx/um_methodx_1c_um-absr-175_0.2mm_highspeedsolid.inst.cfg index 2e098b3a0b..72a2f8e143 100644 --- a/resources/intent/ultimaker_methodx/um_methodx_1c_um-absr-175_0.2mm_highspeedsolid.inst.cfg +++ b/resources/intent/ultimaker_methodx/um_methodx_1c_um-absr-175_0.2mm_highspeedsolid.inst.cfg @@ -26,6 +26,7 @@ infill_pattern = zigzag infill_sparse_density = 99 jerk_print = 35 speed_layer_0 = 55 +speed_prime_tower = =speed_print/5 speed_print = 300 speed_support = 100 speed_support_interface = 75 diff --git a/resources/intent/ultimaker_methodx/um_methodx_1c_um-nylon-175_0.2mm_highspeed.inst.cfg b/resources/intent/ultimaker_methodx/um_methodx_1c_um-nylon-175_0.2mm_highspeed.inst.cfg deleted file mode 100644 index d31a6542b6..0000000000 --- a/resources/intent/ultimaker_methodx/um_methodx_1c_um-nylon-175_0.2mm_highspeed.inst.cfg +++ /dev/null @@ -1,25 +0,0 @@ -[general] -definition = ultimaker_methodx -name = High Speed -version = 4 - -[metadata] -intent_category = highspeed -is_experimental = True -material = ultimaker_nylon_175 -quality_type = draft -setting_version = 25 -type = intent -variant = 1C - -[values] -acceleration_print = 3500 -bridge_wall_speed = 300 -cool_min_layer_time = 3 -infill_pattern = zigzag -jerk_print = 35 -speed_layer_0 = 55 -speed_print = 300 -speed_travel = 500 -support_pattern = zigzag - diff --git a/resources/intent/ultimaker_methodx/um_methodx_1c_um-nylon-175_0.2mm_highspeedsolid.inst.cfg b/resources/intent/ultimaker_methodx/um_methodx_1c_um-nylon-175_0.2mm_highspeedsolid.inst.cfg deleted file mode 100644 index 29bd7371a0..0000000000 --- a/resources/intent/ultimaker_methodx/um_methodx_1c_um-nylon-175_0.2mm_highspeedsolid.inst.cfg +++ /dev/null @@ -1,31 +0,0 @@ -[general] -definition = ultimaker_methodx -name = High Speed Solid -version = 4 - -[metadata] -intent_category = highspeedsolid -is_experimental = True -material = ultimaker_nylon_175 -quality_type = draft -setting_version = 25 -type = intent -variant = 1C - -[values] -acceleration_print = 3500 -bottom_thickness = =top_bottom_thickness -bridge_wall_speed = 300 -cool_min_layer_time = 3 -infill_angles = [45,135] -infill_material_flow = 97 -infill_pattern = zigzag -infill_sparse_density = 99 -jerk_print = 35 -speed_layer_0 = 55 -speed_print = 300 -speed_travel = 500 -support_pattern = zigzag -top_bottom_thickness = =layer_height * 2 -top_thickness = =top_bottom_thickness - diff --git a/resources/intent/ultimaker_methodx/um_methodx_1xa_um-absr-175_0.2mm_highspeed.inst.cfg b/resources/intent/ultimaker_methodx/um_methodx_1xa_um-absr-175_0.2mm_highspeed.inst.cfg index 0db1a5b803..4f65ccabe5 100644 --- a/resources/intent/ultimaker_methodx/um_methodx_1xa_um-absr-175_0.2mm_highspeed.inst.cfg +++ b/resources/intent/ultimaker_methodx/um_methodx_1xa_um-absr-175_0.2mm_highspeed.inst.cfg @@ -22,6 +22,7 @@ cool_min_temperature = 245.0 infill_pattern = zigzag jerk_print = 35 speed_layer_0 = 55 +speed_prime_tower = =speed_print/5 speed_print = 300 speed_support = 100 speed_support_interface = 75 diff --git a/resources/intent/ultimaker_methodx/um_methodx_1xa_um-absr-175_0.2mm_highspeedsolid.inst.cfg b/resources/intent/ultimaker_methodx/um_methodx_1xa_um-absr-175_0.2mm_highspeedsolid.inst.cfg index b6ff6e1ebd..9bdbbe3019 100644 --- a/resources/intent/ultimaker_methodx/um_methodx_1xa_um-absr-175_0.2mm_highspeedsolid.inst.cfg +++ b/resources/intent/ultimaker_methodx/um_methodx_1xa_um-absr-175_0.2mm_highspeedsolid.inst.cfg @@ -26,6 +26,7 @@ infill_pattern = zigzag infill_sparse_density = 99 jerk_print = 35 speed_layer_0 = 55 +speed_prime_tower = =speed_print/5 speed_print = 300 speed_support = 100 speed_support_interface = 75 diff --git a/resources/intent/ultimaker_methodx/um_methodx_labs_um-absr-175_0.2mm_highspeed.inst.cfg b/resources/intent/ultimaker_methodx/um_methodx_labs_um-absr-175_0.2mm_highspeed.inst.cfg index 4b42af13fa..c9bd04bcdb 100644 --- a/resources/intent/ultimaker_methodx/um_methodx_labs_um-absr-175_0.2mm_highspeed.inst.cfg +++ b/resources/intent/ultimaker_methodx/um_methodx_labs_um-absr-175_0.2mm_highspeed.inst.cfg @@ -22,6 +22,7 @@ cool_min_temperature = 245.0 infill_pattern = zigzag jerk_print = 35 speed_layer_0 = 55 +speed_prime_tower = =speed_print/5 speed_print = 300 speed_support = 100 speed_support_interface = 75 diff --git a/resources/intent/ultimaker_methodx/um_methodx_labs_um-absr-175_0.2mm_highspeedsolid.inst.cfg b/resources/intent/ultimaker_methodx/um_methodx_labs_um-absr-175_0.2mm_highspeedsolid.inst.cfg index 69a50a831b..a69db2d057 100644 --- a/resources/intent/ultimaker_methodx/um_methodx_labs_um-absr-175_0.2mm_highspeedsolid.inst.cfg +++ b/resources/intent/ultimaker_methodx/um_methodx_labs_um-absr-175_0.2mm_highspeedsolid.inst.cfg @@ -26,6 +26,7 @@ infill_pattern = zigzag infill_sparse_density = 99 jerk_print = 35 speed_layer_0 = 55 +speed_prime_tower = =speed_print/5 speed_print = 300 speed_support = 100 speed_support_interface = 75 diff --git a/resources/intent/ultimaker_methodx/um_methodx_labs_um-nylon-175_0.2mm_highspeed.inst.cfg b/resources/intent/ultimaker_methodx/um_methodx_labs_um-nylon-175_0.2mm_highspeed.inst.cfg deleted file mode 100644 index e54a52ba05..0000000000 --- a/resources/intent/ultimaker_methodx/um_methodx_labs_um-nylon-175_0.2mm_highspeed.inst.cfg +++ /dev/null @@ -1,25 +0,0 @@ -[general] -definition = ultimaker_methodx -name = High Speed -version = 4 - -[metadata] -intent_category = highspeed -is_experimental = True -material = ultimaker_nylon_175 -quality_type = draft -setting_version = 25 -type = intent -variant = LABS - -[values] -acceleration_print = 3500 -bridge_wall_speed = 300 -cool_min_layer_time = 3 -infill_pattern = zigzag -jerk_print = 35 -speed_layer_0 = 55 -speed_print = 300 -speed_travel = 500 -support_pattern = zigzag - diff --git a/resources/intent/ultimaker_methodx/um_methodx_labs_um-nylon-175_0.2mm_highspeedsolid.inst.cfg b/resources/intent/ultimaker_methodx/um_methodx_labs_um-nylon-175_0.2mm_highspeedsolid.inst.cfg deleted file mode 100644 index d1402a3140..0000000000 --- a/resources/intent/ultimaker_methodx/um_methodx_labs_um-nylon-175_0.2mm_highspeedsolid.inst.cfg +++ /dev/null @@ -1,31 +0,0 @@ -[general] -definition = ultimaker_methodx -name = High Speed Solid -version = 4 - -[metadata] -intent_category = highspeedsolid -is_experimental = True -material = ultimaker_nylon_175 -quality_type = draft -setting_version = 25 -type = intent -variant = LABS - -[values] -acceleration_print = 3500 -bottom_thickness = =top_bottom_thickness -bridge_wall_speed = 300 -cool_min_layer_time = 3 -infill_angles = [45,135] -infill_material_flow = 97 -infill_pattern = zigzag -infill_sparse_density = 99 -jerk_print = 35 -speed_layer_0 = 55 -speed_print = 300 -speed_travel = 500 -support_pattern = zigzag -top_bottom_thickness = =layer_height * 2 -top_thickness = =top_bottom_thickness - diff --git a/resources/intent/ultimaker_methodxl/um_methodxl_1c_um-absr-175_0.2mm_highspeed.inst.cfg b/resources/intent/ultimaker_methodxl/um_methodxl_1c_um-absr-175_0.2mm_highspeed.inst.cfg index 0328525090..f0a38b5a25 100644 --- a/resources/intent/ultimaker_methodxl/um_methodxl_1c_um-absr-175_0.2mm_highspeed.inst.cfg +++ b/resources/intent/ultimaker_methodxl/um_methodxl_1c_um-absr-175_0.2mm_highspeed.inst.cfg @@ -22,6 +22,7 @@ cool_min_temperature = 245.0 infill_pattern = zigzag jerk_print = 35 speed_layer_0 = 55 +speed_prime_tower = =speed_print/5 speed_print = 300 speed_support = 100 speed_support_interface = 75 diff --git a/resources/intent/ultimaker_methodxl/um_methodxl_1c_um-absr-175_0.2mm_highspeedsolid.inst.cfg b/resources/intent/ultimaker_methodxl/um_methodxl_1c_um-absr-175_0.2mm_highspeedsolid.inst.cfg index 0c2bb88cc7..9ad152ffcd 100644 --- a/resources/intent/ultimaker_methodxl/um_methodxl_1c_um-absr-175_0.2mm_highspeedsolid.inst.cfg +++ b/resources/intent/ultimaker_methodxl/um_methodxl_1c_um-absr-175_0.2mm_highspeedsolid.inst.cfg @@ -26,6 +26,7 @@ infill_pattern = zigzag infill_sparse_density = 99 jerk_print = 35 speed_layer_0 = 55 +speed_prime_tower = =speed_print/5 speed_print = 300 speed_support = 100 speed_support_interface = 75 diff --git a/resources/intent/ultimaker_methodxl/um_methodxl_1xa_um-absr-175_0.2mm_highspeed.inst.cfg b/resources/intent/ultimaker_methodxl/um_methodxl_1xa_um-absr-175_0.2mm_highspeed.inst.cfg index a82ddaa428..3835fdfedf 100644 --- a/resources/intent/ultimaker_methodxl/um_methodxl_1xa_um-absr-175_0.2mm_highspeed.inst.cfg +++ b/resources/intent/ultimaker_methodxl/um_methodxl_1xa_um-absr-175_0.2mm_highspeed.inst.cfg @@ -22,6 +22,7 @@ cool_min_temperature = 245.0 infill_pattern = zigzag jerk_print = 35 speed_layer_0 = 55 +speed_prime_tower = =speed_print/5 speed_print = 300 speed_support = 100 speed_support_interface = 75 diff --git a/resources/intent/ultimaker_methodxl/um_methodxl_1xa_um-absr-175_0.2mm_highspeedsolid.inst.cfg b/resources/intent/ultimaker_methodxl/um_methodxl_1xa_um-absr-175_0.2mm_highspeedsolid.inst.cfg index 9aebcb531b..0e6f4d11cd 100644 --- a/resources/intent/ultimaker_methodxl/um_methodxl_1xa_um-absr-175_0.2mm_highspeedsolid.inst.cfg +++ b/resources/intent/ultimaker_methodxl/um_methodxl_1xa_um-absr-175_0.2mm_highspeedsolid.inst.cfg @@ -26,6 +26,7 @@ infill_pattern = zigzag infill_sparse_density = 99 jerk_print = 35 speed_layer_0 = 55 +speed_prime_tower = =speed_print/5 speed_print = 300 speed_support = 100 speed_support_interface = 75 diff --git a/resources/intent/ultimaker_methodxl/um_methodxl_labs_um-absr-175_0.2mm_highspeed.inst.cfg b/resources/intent/ultimaker_methodxl/um_methodxl_labs_um-absr-175_0.2mm_highspeed.inst.cfg index 11aa6d2878..48340b2e09 100644 --- a/resources/intent/ultimaker_methodxl/um_methodxl_labs_um-absr-175_0.2mm_highspeed.inst.cfg +++ b/resources/intent/ultimaker_methodxl/um_methodxl_labs_um-absr-175_0.2mm_highspeed.inst.cfg @@ -22,6 +22,7 @@ cool_min_temperature = 245.0 infill_pattern = zigzag jerk_print = 35 speed_layer_0 = 55 +speed_prime_tower = =speed_print/5 speed_print = 300 speed_support = 100 speed_support_interface = 75 diff --git a/resources/intent/ultimaker_methodxl/um_methodxl_labs_um-absr-175_0.2mm_highspeedsolid.inst.cfg b/resources/intent/ultimaker_methodxl/um_methodxl_labs_um-absr-175_0.2mm_highspeedsolid.inst.cfg index ea8caef493..bb48267880 100644 --- a/resources/intent/ultimaker_methodxl/um_methodxl_labs_um-absr-175_0.2mm_highspeedsolid.inst.cfg +++ b/resources/intent/ultimaker_methodxl/um_methodxl_labs_um-absr-175_0.2mm_highspeedsolid.inst.cfg @@ -26,6 +26,7 @@ infill_pattern = zigzag infill_sparse_density = 99 jerk_print = 35 speed_layer_0 = 55 +speed_prime_tower = =speed_print/5 speed_print = 300 speed_support = 100 speed_support_interface = 75 diff --git a/resources/quality/ultimaker_method/um_method_1a_um-nylon-175_0.2mm.inst.cfg b/resources/quality/ultimaker_method/um_method_1a_um-nylon-175_0.2mm.inst.cfg index 6859b6c0b2..21785ed4ff 100644 --- a/resources/quality/ultimaker_method/um_method_1a_um-nylon-175_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_method/um_method_1a_um-nylon-175_0.2mm.inst.cfg @@ -42,7 +42,7 @@ support_bottom_distance = =layer_height support_bottom_enable = False support_bottom_line_width = 0.6 support_bottom_stair_step_height = 0 -support_infill_rate = =0 if support_structure == tree else 12.0 +support_infill_rate = =0 if support_structure == 'tree' else 12.0 support_interface_height = 0.406 support_interface_material_flow = 95 support_interface_pattern = lines diff --git a/resources/quality/ultimaker_method/um_method_1c_um-nylon-175_0.2mm.inst.cfg b/resources/quality/ultimaker_method/um_method_1c_um-nylon-175_0.2mm.inst.cfg index 57a0c78003..c9fcc9dae7 100644 --- a/resources/quality/ultimaker_method/um_method_1c_um-nylon-175_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_method/um_method_1c_um-nylon-175_0.2mm.inst.cfg @@ -42,7 +42,7 @@ support_bottom_distance = =layer_height support_bottom_enable = False support_bottom_line_width = 0.6 support_bottom_stair_step_height = 0 -support_infill_rate = =0 if support_structure == tree else 12.0 +support_infill_rate = =0 if support_structure == 'tree' else 12.0 support_interface_height = 0.406 support_interface_material_flow = 95 support_interface_pattern = lines diff --git a/resources/quality/ultimaker_method/um_method_labs_um-nylon-175_0.2mm.inst.cfg b/resources/quality/ultimaker_method/um_method_labs_um-nylon-175_0.2mm.inst.cfg index cf87c5c74b..2325dbfa00 100644 --- a/resources/quality/ultimaker_method/um_method_labs_um-nylon-175_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_method/um_method_labs_um-nylon-175_0.2mm.inst.cfg @@ -42,7 +42,7 @@ support_bottom_distance = =layer_height support_bottom_enable = False support_bottom_line_width = 0.6 support_bottom_stair_step_height = 0 -support_infill_rate = =0 if support_structure == tree else 12.0 +support_infill_rate = =0 if support_structure == 'tree' else 12.0 support_interface_height = 0.406 support_interface_material_flow = 95 support_interface_pattern = lines diff --git a/resources/quality/ultimaker_methodx/um_methodx_1a_um-nylon-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodx/um_methodx_1a_um-nylon-175_0.2mm.inst.cfg index e2f294f391..fa7f524998 100644 --- a/resources/quality/ultimaker_methodx/um_methodx_1a_um-nylon-175_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_methodx/um_methodx_1a_um-nylon-175_0.2mm.inst.cfg @@ -42,7 +42,7 @@ support_bottom_distance = =layer_height support_bottom_enable = False support_bottom_line_width = 0.6 support_bottom_stair_step_height = 0 -support_infill_rate = =0 if support_structure == tree else 12.0 +support_infill_rate = =0 if support_structure == 'tree' else 12.0 support_interface_height = 0.406 support_interface_material_flow = 95 support_interface_pattern = lines diff --git a/resources/quality/ultimaker_methodx/um_methodx_1c_um-nylon-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodx/um_methodx_1c_um-nylon-175_0.2mm.inst.cfg index 788d768ff2..f167c56520 100644 --- a/resources/quality/ultimaker_methodx/um_methodx_1c_um-nylon-175_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_methodx/um_methodx_1c_um-nylon-175_0.2mm.inst.cfg @@ -42,7 +42,7 @@ support_bottom_distance = =layer_height support_bottom_enable = False support_bottom_line_width = 0.6 support_bottom_stair_step_height = 0 -support_infill_rate = =0 if support_structure == tree else 12.0 +support_infill_rate = =0 if support_structure == 'tree' else 12.0 support_interface_height = 0.406 support_interface_material_flow = 95 support_interface_pattern = lines diff --git a/resources/quality/ultimaker_methodx/um_methodx_labs_um-nylon-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodx/um_methodx_labs_um-nylon-175_0.2mm.inst.cfg index d5f520eb71..36c3360377 100644 --- a/resources/quality/ultimaker_methodx/um_methodx_labs_um-nylon-175_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_methodx/um_methodx_labs_um-nylon-175_0.2mm.inst.cfg @@ -42,7 +42,7 @@ support_bottom_distance = =layer_height support_bottom_enable = False support_bottom_line_width = 0.6 support_bottom_stair_step_height = 0 -support_infill_rate = =0 if support_structure == tree else 12.0 +support_infill_rate = =0 if support_structure == 'tree' else 12.0 support_interface_height = 0.406 support_interface_material_flow = 95 support_interface_pattern = lines