diff --git a/resources/quality/ultimaker3/um3_bb0.4_BAM_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_bb0.4_BAM_Draft_Print.inst.cfg
index 1af2234a66..8feb32f052 100644
--- a/resources/quality/ultimaker3/um3_bb0.4_BAM_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_bb0.4_BAM_Draft_Print.inst.cfg
@@ -12,19 +12,36 @@ variant = BB 0.4
 weight = -2
 
 [values]
+acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 3500)
+acceleration_support = =math.ceil(acceleration_print * 2000 / 3500)
+acceleration_support_bottom = =extruderValue(support_bottom_extruder_nr, 'acceleration_support_interface')
+acceleration_support_interface = =acceleration_topbottom
 brim_replaces_support = False
+brim_width = 7
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature + 5
 prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100
+retraction_amount = 6.5
+retraction_min_travel = =line_width * 2
+retraction_prime_speed = =retraction_speed
 skin_overlap = 20
+speed_prime_tower = =speed_topbottom
+speed_print = 70
+speed_support = =speed_wall_0
+speed_support_interface = =speed_topbottom
 speed_topbottom = =math.ceil(speed_print * 35 / 70)
 speed_wall = =math.ceil(speed_print * 50 / 70)
 speed_wall_0 = =math.ceil(speed_wall * 35 / 50)
 support_angle = 45
 support_bottom_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height
+support_bottom_height = =extruderValue(support_bottom_extruder_nr, 'support_interface_height')
 support_interface_density = =min(extruderValues('material_surface_energy'))
 support_interface_enable = True
 support_top_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height
+support_z_distance = =layer_height * 2
+switch_extruder_prime_speed = =switch_extruder_retraction_speeds
+switch_extruder_retraction_amount = =machine_heat_zone_length
 top_bottom_thickness = 1
+xy_offset_layer_0 = =(-0.2 if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
 
diff --git a/resources/quality/ultimaker3/um3_bb0.4_BAM_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_bb0.4_BAM_Fast_Print.inst.cfg
index a40742a656..1766a6cc17 100644
--- a/resources/quality/ultimaker3/um3_bb0.4_BAM_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_bb0.4_BAM_Fast_Print.inst.cfg
@@ -12,19 +12,36 @@ variant = BB 0.4
 weight = -1
 
 [values]
+acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 3500)
+acceleration_support = =math.ceil(acceleration_print * 2000 / 3500)
+acceleration_support_bottom = =extruderValue(support_bottom_extruder_nr, 'acceleration_support_interface')
+acceleration_support_interface = =acceleration_topbottom
 brim_replaces_support = False
+brim_width = 7
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100
+retraction_amount = 6.5
+retraction_min_travel = =line_width * 2
+retraction_prime_speed = =retraction_speed
+skin_overlap = 15
+speed_prime_tower = =speed_topbottom
 speed_print = 80
+speed_support = =speed_wall_0
+speed_support_interface = =speed_topbottom
 speed_topbottom = =math.ceil(speed_print * 30 / 80)
 speed_wall = =math.ceil(speed_print * 40 / 80)
 speed_wall_0 = =math.ceil(speed_wall * 30 / 40)
 support_angle = 45
 support_bottom_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height
+support_bottom_height = =extruderValue(support_bottom_extruder_nr, 'support_interface_height')
 support_infill_sparse_thickness = =2*layer_height
 support_interface_density = =min(extruderValues('material_surface_energy'))
 support_interface_enable = True
 support_top_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 1) * layer_height
+support_z_distance = =layer_height * 2
+switch_extruder_prime_speed = =switch_extruder_retraction_speeds
+switch_extruder_retraction_amount = =machine_heat_zone_length
 top_bottom_thickness = 1
+xy_offset_layer_0 = =(-0.2 if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
 
diff --git a/resources/quality/ultimaker3/um3_bb0.4_BAM_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_bb0.4_BAM_Normal_Quality.inst.cfg
index cd197e2028..a4d01342a7 100644
--- a/resources/quality/ultimaker3/um3_bb0.4_BAM_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_bb0.4_BAM_Normal_Quality.inst.cfg
@@ -12,16 +12,36 @@ variant = BB 0.4
 weight = 0
 
 [values]
+acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 3500)
+acceleration_support = =math.ceil(acceleration_print * 2000 / 3500)
+acceleration_support_bottom = =extruderValue(support_bottom_extruder_nr, 'acceleration_support_interface')
+acceleration_support_interface = =acceleration_topbottom
 brim_replaces_support = False
+brim_width = 7
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100
+retraction_amount = 6.5
+retraction_min_travel = =line_width * 2
+retraction_prime_speed = =retraction_speed
 skin_overlap = 10
+speed_prime_tower = =speed_topbottom
+speed_print = 70
+speed_support = =speed_wall_0
+speed_support_interface = =speed_topbottom
+speed_topbottom = =math.ceil(speed_print * 30 / 70)
+speed_wall = =math.ceil(speed_print * 30 / 70)
+speed_wall_0 = =math.ceil(speed_wall * 20 / 30)
 support_angle = 45
 support_bottom_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height
+support_bottom_height = =extruderValue(support_bottom_extruder_nr, 'support_interface_height')
 support_infill_sparse_thickness = =2*layer_height
 support_interface_density = =min(extruderValues('material_surface_energy'))
 support_interface_enable = True
 support_top_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 1) * layer_height
+support_z_distance = =layer_height * 2
+switch_extruder_prime_speed = =switch_extruder_retraction_speeds
+switch_extruder_retraction_amount = =machine_heat_zone_length
 top_bottom_thickness = 1
+xy_offset_layer_0 = =(-0.2 if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
 
diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.4_bam_0.15mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.4_bam_0.15mm.inst.cfg
index fa0a127997..567312fe36 100644
--- a/resources/quality/ultimaker_s3/um_s3_bb0.4_bam_0.15mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_bb0.4_bam_0.15mm.inst.cfg
@@ -17,11 +17,13 @@ acceleration_support = =math.ceil(acceleration_print * 2000 / 3500)
 acceleration_support_bottom = =extruderValue(support_bottom_extruder_nr, 'acceleration_support_interface')
 acceleration_support_interface = =acceleration_topbottom
 brim_replaces_support = False
+brim_width = 7
 build_volume_temperature = =50 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 24
 default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 60
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100
+retraction_amount = 6.5
 speed_prime_tower = =speed_topbottom
 speed_print = 80
 speed_support = =speed_wall_0
@@ -35,7 +37,10 @@ support_bottom_height = =extruderValue(support_bottom_extruder_nr, 'support_inte
 support_infill_sparse_thickness = =2 * layer_height
 support_interface_density = =min(extruderValues('material_surface_energy'))
 support_interface_enable = True
+support_structure = normal
 support_top_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 1) * layer_height
+support_z_distance = =layer_height * 2
+switch_extruder_prime_speed = =switch_extruder_retraction_speeds
 switch_extruder_retraction_amount = =machine_heat_zone_length
 top_bottom_thickness = 1
 
diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.4_bam_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.4_bam_0.1mm.inst.cfg
index 2f79f28df3..362b8aae8b 100644
--- a/resources/quality/ultimaker_s3/um_s3_bb0.4_bam_0.1mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_bb0.4_bam_0.1mm.inst.cfg
@@ -17,14 +17,19 @@ acceleration_support = =math.ceil(acceleration_print * 2000 / 3500)
 acceleration_support_bottom = =extruderValue(support_bottom_extruder_nr, 'acceleration_support_interface')
 acceleration_support_interface = =acceleration_topbottom
 brim_replaces_support = False
+brim_width = 7
 build_volume_temperature = =50 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 24
 default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 60
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100
+retraction_amount = 6.5
 speed_prime_tower = =speed_topbottom
+speed_print = 70
 speed_support = =speed_wall_0
 speed_support_interface = =speed_topbottom
+speed_topbottom = =math.ceil(speed_print * 30 / 70)
+speed_wall = =math.ceil(speed_print * 30 / 70)
 speed_wall_0 = =math.ceil(speed_wall * 20 / 30)
 support_angle = 45
 support_bottom_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height
@@ -32,7 +37,10 @@ support_bottom_height = =extruderValue(support_bottom_extruder_nr, 'support_inte
 support_infill_sparse_thickness = =2 * layer_height
 support_interface_density = =min(extruderValues('material_surface_energy'))
 support_interface_enable = True
+support_structure = normal
 support_top_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 1) * layer_height
+support_z_distance = =layer_height * 2
+switch_extruder_prime_speed = =switch_extruder_retraction_speeds
 switch_extruder_retraction_amount = =machine_heat_zone_length
 top_bottom_thickness = 1
 
diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.4_bam_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.4_bam_0.2mm.inst.cfg
index 3eecb085af..2a5820652a 100644
--- a/resources/quality/ultimaker_s3/um_s3_bb0.4_bam_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_bb0.4_bam_0.2mm.inst.cfg
@@ -17,13 +17,16 @@ acceleration_support = =math.ceil(acceleration_print * 2000 / 3500)
 acceleration_support_bottom = =extruderValue(support_bottom_extruder_nr, 'acceleration_support_interface')
 acceleration_support_interface = =acceleration_topbottom
 brim_replaces_support = False
+brim_width = 7
 build_volume_temperature = =50 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 24
 default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 60
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature + 5
 prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100
+retraction_amount = 6.5
 speed_prime_tower = =speed_topbottom
+speed_print = 70
 speed_support = =speed_wall_0
 speed_support_interface = =speed_topbottom
 speed_topbottom = =math.ceil(speed_print * 35 / 70)
@@ -34,7 +37,10 @@ support_bottom_distance = =math.ceil(min(extruderValues('material_adhesion_tende
 support_bottom_height = =extruderValue(support_bottom_extruder_nr, 'support_interface_height')
 support_interface_density = =min(extruderValues('material_surface_energy'))
 support_interface_enable = True
+support_structure = normal
 support_top_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height
+support_z_distance = =layer_height * 2
+switch_extruder_prime_speed = =switch_extruder_retraction_speeds
 switch_extruder_retraction_amount = =machine_heat_zone_length
 top_bottom_thickness = 1
 
diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.4_bam_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.4_bam_0.3mm.inst.cfg
index 3f0fd9a8d4..8e42de9972 100644
--- a/resources/quality/ultimaker_s3/um_s3_bb0.4_bam_0.3mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_bb0.4_bam_0.3mm.inst.cfg
@@ -18,13 +18,16 @@ acceleration_support = =math.ceil(acceleration_print * 2000 / 3500)
 acceleration_support_bottom = =extruderValue(support_bottom_extruder_nr, 'acceleration_support_interface')
 acceleration_support_interface = =acceleration_topbottom
 brim_replaces_support = False
+brim_width = 7
 build_volume_temperature = =50 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 24
 default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 60
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature + 5
 prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100
+retraction_amount = 6.5
 speed_prime_tower = =speed_topbottom
+speed_print = 70
 speed_support = =speed_wall_0
 speed_support_interface = =speed_topbottom
 speed_topbottom = =math.ceil(speed_print * 35 / 70)
@@ -35,7 +38,10 @@ support_bottom_distance = 0.3
 support_bottom_height = =extruderValue(support_bottom_extruder_nr, 'support_interface_height')
 support_interface_density = =min(extruderValues('material_surface_energy'))
 support_interface_enable = True
+support_structure = normal
 support_top_distance = 0.3
+support_z_distance = =layer_height * 2
+switch_extruder_prime_speed = =switch_extruder_retraction_speeds
 switch_extruder_retraction_amount = =machine_heat_zone_length
 top_bottom_thickness = 1
 
diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.4_bam_0.15mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.4_bam_0.15mm.inst.cfg
index e4124e2cc2..32b3a3f4f0 100644
--- a/resources/quality/ultimaker_s5/um_s5_bb0.4_bam_0.15mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_bb0.4_bam_0.15mm.inst.cfg
@@ -17,11 +17,13 @@ acceleration_support = =math.ceil(acceleration_print * 2000 / 3500)
 acceleration_support_bottom = =extruderValue(support_bottom_extruder_nr, 'acceleration_support_interface')
 acceleration_support_interface = =acceleration_topbottom
 brim_replaces_support = False
+brim_width = 7
 build_volume_temperature = =50 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 24
 default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 60
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100
+retraction_amount = 6.5
 speed_prime_tower = =speed_topbottom
 speed_print = 80
 speed_support = =speed_wall_0
@@ -35,7 +37,10 @@ support_bottom_height = =extruderValue(support_bottom_extruder_nr, 'support_inte
 support_infill_sparse_thickness = =2 * layer_height
 support_interface_density = =min(extruderValues('material_surface_energy'))
 support_interface_enable = True
+support_structure = normal
 support_top_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 1) * layer_height
+support_z_distance = =layer_height * 2
+switch_extruder_prime_speed = =switch_extruder_retraction_speeds
 switch_extruder_retraction_amount = =machine_heat_zone_length
 top_bottom_thickness = 1
 
diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.4_bam_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.4_bam_0.1mm.inst.cfg
index ebf763318c..e8c56b184f 100644
--- a/resources/quality/ultimaker_s5/um_s5_bb0.4_bam_0.1mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_bb0.4_bam_0.1mm.inst.cfg
@@ -17,14 +17,19 @@ acceleration_support = =math.ceil(acceleration_print * 2000 / 3500)
 acceleration_support_bottom = =extruderValue(support_bottom_extruder_nr, 'acceleration_support_interface')
 acceleration_support_interface = =acceleration_topbottom
 brim_replaces_support = False
+brim_width = 7
 build_volume_temperature = =50 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 24
 default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 60
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100
+retraction_amount = 6.5
 speed_prime_tower = =speed_topbottom
+speed_print = 70
 speed_support = =speed_wall_0
 speed_support_interface = =speed_topbottom
+speed_topbottom = =math.ceil(speed_print * 30 / 70)
+speed_wall = =math.ceil(speed_print * 30 / 70)
 speed_wall_0 = =math.ceil(speed_wall * 20 / 30)
 support_angle = 45
 support_bottom_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height
@@ -32,7 +37,10 @@ support_bottom_height = =extruderValue(support_bottom_extruder_nr, 'support_inte
 support_infill_sparse_thickness = =2 * layer_height
 support_interface_density = =min(extruderValues('material_surface_energy'))
 support_interface_enable = True
+support_structure = normal
 support_top_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 1) * layer_height
+support_z_distance = =layer_height * 2
+switch_extruder_prime_speed = =switch_extruder_retraction_speeds
 switch_extruder_retraction_amount = =machine_heat_zone_length
 top_bottom_thickness = 1
 
diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.4_bam_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.4_bam_0.2mm.inst.cfg
index 8f8d7f0889..5bb558daae 100644
--- a/resources/quality/ultimaker_s5/um_s5_bb0.4_bam_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_bb0.4_bam_0.2mm.inst.cfg
@@ -17,13 +17,16 @@ acceleration_support = =math.ceil(acceleration_print * 2000 / 3500)
 acceleration_support_bottom = =extruderValue(support_bottom_extruder_nr, 'acceleration_support_interface')
 acceleration_support_interface = =acceleration_topbottom
 brim_replaces_support = False
+brim_width = 7
 build_volume_temperature = =50 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 24
 default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 60
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature + 5
 prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100
+retraction_amount = 6.5
 speed_prime_tower = =speed_topbottom
+speed_print = 70
 speed_support = =speed_wall_0
 speed_support_interface = =speed_topbottom
 speed_topbottom = =math.ceil(speed_print * 35 / 70)
@@ -34,7 +37,10 @@ support_bottom_distance = =math.ceil(min(extruderValues('material_adhesion_tende
 support_bottom_height = =extruderValue(support_bottom_extruder_nr, 'support_interface_height')
 support_interface_density = =min(extruderValues('material_surface_energy'))
 support_interface_enable = True
+support_structure = normal
 support_top_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height
+support_z_distance = =layer_height * 2
+switch_extruder_prime_speed = =switch_extruder_retraction_speeds
 switch_extruder_retraction_amount = =machine_heat_zone_length
 top_bottom_thickness = 1
 
diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.4_bam_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.4_bam_0.3mm.inst.cfg
index 5561536af9..3884573228 100644
--- a/resources/quality/ultimaker_s5/um_s5_bb0.4_bam_0.3mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_bb0.4_bam_0.3mm.inst.cfg
@@ -18,13 +18,16 @@ acceleration_support = =math.ceil(acceleration_print * 2000 / 3500)
 acceleration_support_bottom = =extruderValue(support_bottom_extruder_nr, 'acceleration_support_interface')
 acceleration_support_interface = =acceleration_topbottom
 brim_replaces_support = False
+brim_width = 7
 build_volume_temperature = =50 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 24
 default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 60
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature + 5
 prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100
+retraction_amount = 6.5
 speed_prime_tower = =speed_topbottom
+speed_print = 70
 speed_support = =speed_wall_0
 speed_support_interface = =speed_topbottom
 speed_topbottom = =math.ceil(speed_print * 35 / 70)
@@ -35,7 +38,10 @@ support_bottom_distance = 0.3
 support_bottom_height = =extruderValue(support_bottom_extruder_nr, 'support_interface_height')
 support_interface_density = =min(extruderValues('material_surface_energy'))
 support_interface_enable = True
+support_structure = normal
 support_top_distance = 0.3
+support_z_distance = =layer_height * 2
+switch_extruder_prime_speed = =switch_extruder_retraction_speeds
 switch_extruder_retraction_amount = =machine_heat_zone_length
 top_bottom_thickness = 1