diff --git a/resources/quality/ultimaker_factor4/um_f4_bb0.4_bvoh_0.15mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_bb0.4_bvoh_0.15mm.inst.cfg
new file mode 100644
index 0000000000..c6548f0173
--- /dev/null
+++ b/resources/quality/ultimaker_factor4/um_f4_bb0.4_bvoh_0.15mm.inst.cfg
@@ -0,0 +1,43 @@
+[general]
+definition = ultimaker_factor4
+name = Normal
+version = 4
+
+[metadata]
+material = generic_bvoh
+quality_type = fast
+setting_version = 25
+type = quality
+variant = BB 0.4
+weight = -1
+
+[values]
+acceleration_print = 1000.0
+acceleration_support_bottom = 100
+acceleration_support_interface = 1000
+brim_replaces_support = False
+build_volume_temperature = =40 if extruders_enabled_count > 1 else 35
+default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
+gradual_flow_discretisation_step_size = 0.1
+gradual_flow_enabled = True
+gradual_support_infill_steps = 0
+initial_layer_line_width_factor = 125
+jerk_print = 10
+material_flow_layer_0 = 90
+max_flow_acceleration = 1
+minimum_support_area = 4
+prime_tower_flow = 90
+prime_tower_min_volume = 15
+retraction_min_travel = 5.0
+retraction_prime_speed = 10.0
+skin_material_flow = =material_flow * 0.93
+speed_print = 30
+support_angle = 45
+support_infill_rate = 20
+support_infill_sparse_thickness = =min(layer_height * 2, machine_nozzle_size * 3 / 4) if layer_height <= 0.15 / 0.4 * machine_nozzle_size else layer_height
+support_interface_offset = 1
+support_offset = 3
+support_xy_distance = 2
+support_z_distance = 0
+switch_extruder_prime_speed = 10.0
+
diff --git a/resources/quality/ultimaker_factor4/um_f4_bb0.4_bvoh_0.1mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_bb0.4_bvoh_0.1mm.inst.cfg
new file mode 100644
index 0000000000..6f1b986c4e
--- /dev/null
+++ b/resources/quality/ultimaker_factor4/um_f4_bb0.4_bvoh_0.1mm.inst.cfg
@@ -0,0 +1,43 @@
+[general]
+definition = ultimaker_factor4
+name = Fine
+version = 4
+
+[metadata]
+material = generic_bvoh
+quality_type = normal
+setting_version = 25
+type = quality
+variant = BB 0.4
+weight = 0
+
+[values]
+acceleration_print = 1000.0
+acceleration_support_bottom = 100
+acceleration_support_interface = 1000
+brim_replaces_support = False
+build_volume_temperature = =40 if extruders_enabled_count > 1 else 35
+default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
+gradual_flow_discretisation_step_size = 0.1
+gradual_flow_enabled = True
+gradual_support_infill_steps = 0
+initial_layer_line_width_factor = 125
+jerk_print = 10
+material_flow_layer_0 = 90
+max_flow_acceleration = 1
+minimum_support_area = 4
+prime_tower_flow = 90
+prime_tower_min_volume = 15
+retraction_min_travel = 5.0
+retraction_prime_speed = 10.0
+skin_material_flow = =material_flow * 0.93
+speed_print = 30
+support_angle = 45
+support_infill_rate = 20
+support_infill_sparse_thickness = =min(layer_height * 2, machine_nozzle_size * 3 / 4) if layer_height <= 0.15 / 0.4 * machine_nozzle_size else layer_height
+support_interface_offset = 1
+support_offset = 3
+support_xy_distance = 2
+support_z_distance = 0
+switch_extruder_prime_speed = 10.0
+
diff --git a/resources/quality/ultimaker_factor4/um_f4_bb0.4_bvoh_0.2mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_bb0.4_bvoh_0.2mm.inst.cfg
new file mode 100644
index 0000000000..ff49315c1e
--- /dev/null
+++ b/resources/quality/ultimaker_factor4/um_f4_bb0.4_bvoh_0.2mm.inst.cfg
@@ -0,0 +1,43 @@
+[general]
+definition = ultimaker_factor4
+name = Fast
+version = 4
+
+[metadata]
+material = generic_bvoh
+quality_type = draft
+setting_version = 25
+type = quality
+variant = BB 0.4
+weight = -2
+
+[values]
+acceleration_print = 1000.0
+acceleration_support_bottom = 100
+acceleration_support_interface = 1000
+brim_replaces_support = False
+build_volume_temperature = =40 if extruders_enabled_count > 1 else 35
+default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
+gradual_flow_discretisation_step_size = 0.1
+gradual_flow_enabled = True
+gradual_support_infill_steps = 0
+initial_layer_line_width_factor = 125
+jerk_print = 10
+material_flow_layer_0 = 90
+max_flow_acceleration = 1
+minimum_support_area = 4
+prime_tower_flow = 90
+prime_tower_min_volume = 15
+retraction_min_travel = 5.0
+retraction_prime_speed = 10.0
+skin_material_flow = =material_flow * 0.93
+speed_print = 30
+support_angle = 45
+support_infill_rate = 20
+support_infill_sparse_thickness = =min(layer_height * 2, machine_nozzle_size * 3 / 4) if layer_height <= 0.15 / 0.4 * machine_nozzle_size else layer_height
+support_interface_offset = 1
+support_offset = 3
+support_xy_distance = 2
+support_z_distance = 0
+switch_extruder_prime_speed = 10.0
+
diff --git a/resources/quality/ultimaker_factor4/um_f4_bb0.4_bvoh_0.3mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_bb0.4_bvoh_0.3mm.inst.cfg
new file mode 100644
index 0000000000..209b16b697
--- /dev/null
+++ b/resources/quality/ultimaker_factor4/um_f4_bb0.4_bvoh_0.3mm.inst.cfg
@@ -0,0 +1,44 @@
+[general]
+definition = ultimaker_factor4
+name = Extra Fast - Experimental
+version = 4
+
+[metadata]
+is_experimental = True
+material = generic_bvoh
+quality_type = verydraft
+setting_version = 25
+type = quality
+variant = BB 0.4
+weight = -3
+
+[values]
+acceleration_print = 1000.0
+acceleration_support_bottom = 100
+acceleration_support_interface = 1000
+brim_replaces_support = False
+build_volume_temperature = =40 if extruders_enabled_count > 1 else 35
+default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
+gradual_flow_discretisation_step_size = 0.1
+gradual_flow_enabled = True
+gradual_support_infill_steps = 0
+initial_layer_line_width_factor = 125
+jerk_print = 10
+material_flow_layer_0 = 90
+max_flow_acceleration = 1
+minimum_support_area = 4
+prime_tower_flow = 90
+prime_tower_min_volume = 15
+retraction_min_travel = 5.0
+retraction_prime_speed = 10.0
+skin_material_flow = =material_flow * 0.93
+speed_print = 30
+support_angle = 45
+support_infill_rate = 20
+support_infill_sparse_thickness = =min(layer_height * 2, machine_nozzle_size * 3 / 4) if layer_height <= 0.15 / 0.4 * machine_nozzle_size else layer_height
+support_interface_offset = 1
+support_offset = 3
+support_xy_distance = 2
+support_z_distance = 0
+switch_extruder_prime_speed = 10.0
+
diff --git a/resources/quality/ultimaker_factor4/um_f4_bb0.8_bvoh_0.2mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_bb0.8_bvoh_0.2mm.inst.cfg
new file mode 100644
index 0000000000..d10b0c939e
--- /dev/null
+++ b/resources/quality/ultimaker_factor4/um_f4_bb0.8_bvoh_0.2mm.inst.cfg
@@ -0,0 +1,43 @@
+[general]
+definition = ultimaker_factor4
+name = Fast
+version = 4
+
+[metadata]
+material = generic_bvoh
+quality_type = draft
+setting_version = 25
+type = quality
+variant = BB 0.8
+weight = -2
+
+[values]
+acceleration_print = 1000.0
+acceleration_support_bottom = 100
+acceleration_support_interface = 1000
+brim_replaces_support = False
+build_volume_temperature = =40 if extruders_enabled_count > 1 else 35
+default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
+gradual_flow_discretisation_step_size = 0.1
+gradual_flow_enabled = True
+gradual_support_infill_steps = 0
+initial_layer_line_width_factor = 125
+jerk_print = 10
+material_flow_layer_0 = 90
+max_flow_acceleration = 1
+minimum_support_area = 4
+prime_tower_flow = 90
+prime_tower_min_volume = 15
+retraction_min_travel = 5.0
+retraction_prime_speed = 10.0
+skin_material_flow = =material_flow * 0.93
+speed_print = 30
+support_angle = 45
+support_infill_rate = 20
+support_infill_sparse_thickness = =min(layer_height * 2, machine_nozzle_size * 3 / 4) if layer_height <= 0.15 / 0.4 * machine_nozzle_size else layer_height
+support_interface_offset = 1
+support_offset = 3
+support_xy_distance = 2
+support_z_distance = 0
+switch_extruder_prime_speed = 10.0
+
diff --git a/resources/quality/ultimaker_factor4/um_f4_bb0.8_bvoh_0.3mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_bb0.8_bvoh_0.3mm.inst.cfg
new file mode 100644
index 0000000000..dd2e2da565
--- /dev/null
+++ b/resources/quality/ultimaker_factor4/um_f4_bb0.8_bvoh_0.3mm.inst.cfg
@@ -0,0 +1,43 @@
+[general]
+definition = ultimaker_factor4
+name = Extra Fast
+version = 4
+
+[metadata]
+material = generic_bvoh
+quality_type = verydraft
+setting_version = 25
+type = quality
+variant = BB 0.8
+weight = -3
+
+[values]
+acceleration_print = 1000.0
+acceleration_support_bottom = 100
+acceleration_support_interface = 1000
+brim_replaces_support = False
+build_volume_temperature = =40 if extruders_enabled_count > 1 else 35
+default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
+gradual_flow_discretisation_step_size = 0.1
+gradual_flow_enabled = True
+gradual_support_infill_steps = 0
+initial_layer_line_width_factor = 125
+jerk_print = 10
+material_flow_layer_0 = 90
+max_flow_acceleration = 1
+minimum_support_area = 4
+prime_tower_flow = 90
+prime_tower_min_volume = 15
+retraction_min_travel = 5.0
+retraction_prime_speed = 10.0
+skin_material_flow = =material_flow * 0.93
+speed_print = 30
+support_angle = 45
+support_infill_rate = 20
+support_infill_sparse_thickness = =min(layer_height * 2, machine_nozzle_size * 3 / 4) if layer_height <= 0.15 / 0.4 * machine_nozzle_size else layer_height
+support_interface_offset = 1
+support_offset = 3
+support_xy_distance = 2
+support_z_distance = 0
+switch_extruder_prime_speed = 10.0
+
diff --git a/resources/quality/ultimaker_factor4/um_f4_bb0.8_bvoh_0.4mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_bb0.8_bvoh_0.4mm.inst.cfg
new file mode 100644
index 0000000000..fa230a1f5f
--- /dev/null
+++ b/resources/quality/ultimaker_factor4/um_f4_bb0.8_bvoh_0.4mm.inst.cfg
@@ -0,0 +1,43 @@
+[general]
+definition = ultimaker_factor4
+name = Sprint
+version = 4
+
+[metadata]
+material = generic_bvoh
+quality_type = superdraft
+setting_version = 25
+type = quality
+variant = BB 0.8
+weight = -4
+
+[values]
+acceleration_print = 1000.0
+acceleration_support_bottom = 100
+acceleration_support_interface = 1000
+brim_replaces_support = False
+build_volume_temperature = =40 if extruders_enabled_count > 1 else 35
+default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
+gradual_flow_discretisation_step_size = 0.1
+gradual_flow_enabled = True
+gradual_support_infill_steps = 0
+initial_layer_line_width_factor = 125
+jerk_print = 10
+material_flow_layer_0 = 90
+max_flow_acceleration = 1
+minimum_support_area = 4
+prime_tower_flow = 90
+prime_tower_min_volume = 15
+retraction_min_travel = 5.0
+retraction_prime_speed = 10.0
+skin_material_flow = =material_flow * 0.93
+speed_print = 30
+support_angle = 45
+support_infill_rate = 20
+support_infill_sparse_thickness = =min(layer_height * 2, machine_nozzle_size * 3 / 4) if layer_height <= 0.15 / 0.4 * machine_nozzle_size else layer_height
+support_interface_offset = 1
+support_offset = 3
+support_xy_distance = 2
+support_z_distance = 0
+switch_extruder_prime_speed = 10.0
+
diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.4_bvoh_0.15mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.4_bvoh_0.15mm.inst.cfg
new file mode 100644
index 0000000000..93c1d4947d
--- /dev/null
+++ b/resources/quality/ultimaker_s3/um_s3_bb0.4_bvoh_0.15mm.inst.cfg
@@ -0,0 +1,35 @@
+[general]
+definition = ultimaker_s3
+name = Normal
+version = 4
+
+[metadata]
+material = generic_bvoh
+quality_type = fast
+setting_version = 25
+type = quality
+variant = BB 0.4
+weight = -1
+
+[values]
+acceleration_prime_tower = 1500
+acceleration_support = 1500
+brim_replaces_support = False
+build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
+cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
+default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
+initial_layer_line_width_factor = 150
+jerk_prime_tower = 20
+jerk_support = 20
+minimum_support_area = 4
+retraction_amount = 6.5
+retraction_count_max = 5
+skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width))
+speed_prime_tower = 50
+speed_support = 50
+speed_support_interface = 50
+support_bottom_density = 70
+support_infill_sparse_thickness = =2 * layer_height
+support_interface_enable = True
+support_z_distance = 0
+
diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.4_bvoh_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.4_bvoh_0.1mm.inst.cfg
new file mode 100644
index 0000000000..f06f8deb6f
--- /dev/null
+++ b/resources/quality/ultimaker_s3/um_s3_bb0.4_bvoh_0.1mm.inst.cfg
@@ -0,0 +1,36 @@
+[general]
+definition = ultimaker_s3
+name = Fine
+version = 4
+
+[metadata]
+material = generic_bvoh
+quality_type = normal
+setting_version = 25
+type = quality
+variant = BB 0.4
+weight = 0
+
+[values]
+acceleration_prime_tower = 1500
+acceleration_support = 1500
+brim_replaces_support = False
+build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
+cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
+default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
+initial_layer_line_width_factor = 150
+jerk_prime_tower = 20
+jerk_support = 20
+material_print_temperature = =default_material_print_temperature - 5
+minimum_support_area = 4
+retraction_amount = 6.5
+retraction_count_max = 5
+skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width))
+speed_prime_tower = 50
+speed_support = 50
+speed_support_interface = 50
+support_bottom_density = 70
+support_infill_sparse_thickness = =2 * layer_height
+support_interface_enable = True
+support_z_distance = 0
+
diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.4_bvoh_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.4_bvoh_0.2mm.inst.cfg
new file mode 100644
index 0000000000..61059651ef
--- /dev/null
+++ b/resources/quality/ultimaker_s3/um_s3_bb0.4_bvoh_0.2mm.inst.cfg
@@ -0,0 +1,35 @@
+[general]
+definition = ultimaker_s3
+name = Fast
+version = 4
+
+[metadata]
+material = generic_bvoh
+quality_type = draft
+setting_version = 25
+type = quality
+variant = BB 0.4
+weight = -2
+
+[values]
+acceleration_prime_tower = 1500
+acceleration_support = 1500
+brim_replaces_support = False
+build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
+cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
+default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
+initial_layer_line_width_factor = 150
+jerk_prime_tower = 20
+jerk_support = 20
+material_print_temperature = =default_material_print_temperature + 5
+minimum_support_area = 4
+retraction_amount = 6.5
+retraction_count_max = 5
+skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width))
+speed_prime_tower = 50
+speed_support = 50
+speed_support_interface = 50
+support_bottom_density = 70
+support_interface_enable = True
+support_z_distance = 0
+
diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.4_bvoh_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.4_bvoh_0.3mm.inst.cfg
new file mode 100644
index 0000000000..8f06dd0562
--- /dev/null
+++ b/resources/quality/ultimaker_s3/um_s3_bb0.4_bvoh_0.3mm.inst.cfg
@@ -0,0 +1,37 @@
+[general]
+definition = ultimaker_s3
+name = Extra Fast - Experimental
+version = 4
+
+[metadata]
+is_experimental = True
+material = generic_bvoh
+quality_type = verydraft
+setting_version = 25
+type = quality
+variant = BB 0.4
+weight = -3
+
+[values]
+acceleration_prime_tower = 1500
+acceleration_support = 1500
+brim_replaces_support = False
+build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
+cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
+default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
+initial_layer_line_width_factor = 150
+jerk_prime_tower = 20
+jerk_support = 20
+material_print_temperature = =default_material_print_temperature - 5
+minimum_support_area = 4
+retraction_amount = 6.5
+retraction_count_max = 5
+skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width))
+speed_prime_tower = 50
+speed_support = 50
+speed_support_interface = 50
+support_bottom_density = 70
+support_infill_sparse_thickness = 0.3
+support_interface_enable = True
+support_z_distance = 0
+
diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.8_bvoh_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.8_bvoh_0.2mm.inst.cfg
new file mode 100644
index 0000000000..a9d67b0552
--- /dev/null
+++ b/resources/quality/ultimaker_s3/um_s3_bb0.8_bvoh_0.2mm.inst.cfg
@@ -0,0 +1,34 @@
+[general]
+definition = ultimaker_s3
+name = Fast
+version = 4
+
+[metadata]
+material = generic_bvoh
+quality_type = draft
+setting_version = 25
+type = quality
+variant = BB 0.8
+weight = -2
+
+[values]
+acceleration_prime_tower = 1500
+acceleration_support = 1500
+brim_replaces_support = False
+build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
+cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
+default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
+initial_layer_line_width_factor = 150
+jerk_prime_tower = 20
+jerk_support = 20
+minimum_support_area = 4
+retraction_amount = 6.5
+retraction_count_max = 5
+skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width))
+speed_prime_tower = 50
+speed_support = 50
+speed_support_interface = 50
+support_bottom_density = 70
+support_interface_enable = True
+support_z_distance = 0
+
diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.8_bvoh_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.8_bvoh_0.3mm.inst.cfg
new file mode 100644
index 0000000000..016887c23c
--- /dev/null
+++ b/resources/quality/ultimaker_s3/um_s3_bb0.8_bvoh_0.3mm.inst.cfg
@@ -0,0 +1,36 @@
+[general]
+definition = ultimaker_s3
+name = Extra Fast
+version = 4
+
+[metadata]
+material = generic_bvoh
+quality_type = verydraft
+setting_version = 25
+type = quality
+variant = BB 0.8
+weight = -3
+
+[values]
+acceleration_prime_tower = 1500
+acceleration_support = 1500
+brim_replaces_support = False
+build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
+cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
+default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
+initial_layer_line_width_factor = 150
+jerk_prime_tower = 20
+jerk_support = 20
+material_print_temperature = =default_material_print_temperature + 5
+minimum_support_area = 4
+retraction_amount = 6.5
+retraction_count_max = 5
+skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width))
+speed_prime_tower = 50
+speed_support = 50
+speed_support_interface = 50
+support_bottom_density = 70
+support_infill_sparse_thickness = 0.3
+support_interface_enable = True
+support_z_distance = 0
+
diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.8_bvoh_0.4mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.8_bvoh_0.4mm.inst.cfg
new file mode 100644
index 0000000000..4d4bffbab9
--- /dev/null
+++ b/resources/quality/ultimaker_s3/um_s3_bb0.8_bvoh_0.4mm.inst.cfg
@@ -0,0 +1,35 @@
+[general]
+definition = ultimaker_s3
+name = Sprint
+version = 4
+
+[metadata]
+material = generic_bvoh
+quality_type = superdraft
+setting_version = 25
+type = quality
+variant = BB 0.8
+weight = -4
+
+[values]
+acceleration_prime_tower = 1500
+acceleration_support = 1500
+brim_replaces_support = False
+build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
+cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
+default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
+initial_layer_line_width_factor = 150
+jerk_prime_tower = 20
+jerk_support = 20
+material_print_temperature = =default_material_print_temperature + 5
+minimum_support_area = 4
+retraction_amount = 6.5
+retraction_count_max = 5
+skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width))
+speed_prime_tower = 50
+speed_support = 50
+speed_support_interface = 50
+support_bottom_density = 70
+support_interface_enable = True
+support_z_distance = 0
+
diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.4_bvoh_0.15mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.4_bvoh_0.15mm.inst.cfg
new file mode 100644
index 0000000000..e5dc8e7295
--- /dev/null
+++ b/resources/quality/ultimaker_s5/um_s5_bb0.4_bvoh_0.15mm.inst.cfg
@@ -0,0 +1,35 @@
+[general]
+definition = ultimaker_s5
+name = Normal
+version = 4
+
+[metadata]
+material = generic_bvoh
+quality_type = fast
+setting_version = 25
+type = quality
+variant = BB 0.4
+weight = -1
+
+[values]
+acceleration_prime_tower = 1500
+acceleration_support = 1500
+brim_replaces_support = False
+build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
+cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
+default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
+initial_layer_line_width_factor = 150
+jerk_prime_tower = 20
+jerk_support = 20
+minimum_support_area = 4
+retraction_amount = 6.5
+retraction_count_max = 5
+skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width))
+speed_prime_tower = 50
+speed_support = 50
+speed_support_interface = 50
+support_bottom_density = 70
+support_infill_sparse_thickness = =2 * layer_height
+support_interface_enable = True
+support_z_distance = 0
+
diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.4_bvoh_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.4_bvoh_0.1mm.inst.cfg
new file mode 100644
index 0000000000..ed7638a4e0
--- /dev/null
+++ b/resources/quality/ultimaker_s5/um_s5_bb0.4_bvoh_0.1mm.inst.cfg
@@ -0,0 +1,36 @@
+[general]
+definition = ultimaker_s5
+name = Fine
+version = 4
+
+[metadata]
+material = generic_bvoh
+quality_type = normal
+setting_version = 25
+type = quality
+variant = BB 0.4
+weight = 0
+
+[values]
+acceleration_prime_tower = 1500
+acceleration_support = 1500
+brim_replaces_support = False
+build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
+cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
+default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
+initial_layer_line_width_factor = 150
+jerk_prime_tower = 20
+jerk_support = 20
+material_print_temperature = =default_material_print_temperature - 5
+minimum_support_area = 4
+retraction_amount = 6.5
+retraction_count_max = 5
+skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width))
+speed_prime_tower = 50
+speed_support = 50
+speed_support_interface = 50
+support_bottom_density = 70
+support_infill_sparse_thickness = =2 * layer_height
+support_interface_enable = True
+support_z_distance = 0
+
diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.4_bvoh_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.4_bvoh_0.2mm.inst.cfg
new file mode 100644
index 0000000000..1d02c886bc
--- /dev/null
+++ b/resources/quality/ultimaker_s5/um_s5_bb0.4_bvoh_0.2mm.inst.cfg
@@ -0,0 +1,35 @@
+[general]
+definition = ultimaker_s5
+name = Fast
+version = 4
+
+[metadata]
+material = generic_bvoh
+quality_type = draft
+setting_version = 25
+type = quality
+variant = BB 0.4
+weight = -2
+
+[values]
+acceleration_prime_tower = 1500
+acceleration_support = 1500
+brim_replaces_support = False
+build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
+cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
+default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
+initial_layer_line_width_factor = 150
+jerk_prime_tower = 20
+jerk_support = 20
+material_print_temperature = =default_material_print_temperature + 5
+minimum_support_area = 4
+retraction_amount = 6.5
+retraction_count_max = 5
+skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width))
+speed_prime_tower = 50
+speed_support = 50
+speed_support_interface = 50
+support_bottom_density = 70
+support_interface_enable = True
+support_z_distance = 0
+
diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.4_bvoh_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.4_bvoh_0.3mm.inst.cfg
new file mode 100644
index 0000000000..b759ae0bb3
--- /dev/null
+++ b/resources/quality/ultimaker_s5/um_s5_bb0.4_bvoh_0.3mm.inst.cfg
@@ -0,0 +1,37 @@
+[general]
+definition = ultimaker_s5
+name = Extra Fast - Experimental
+version = 4
+
+[metadata]
+is_experimental = True
+material = generic_bvoh
+quality_type = verydraft
+setting_version = 25
+type = quality
+variant = BB 0.4
+weight = -3
+
+[values]
+acceleration_prime_tower = 1500
+acceleration_support = 1500
+brim_replaces_support = False
+build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
+cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
+default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
+initial_layer_line_width_factor = 150
+jerk_prime_tower = 20
+jerk_support = 20
+material_print_temperature = =default_material_print_temperature - 5
+minimum_support_area = 4
+retraction_amount = 6.5
+retraction_count_max = 5
+skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width))
+speed_prime_tower = 50
+speed_support = 50
+speed_support_interface = 50
+support_bottom_density = 70
+support_infill_sparse_thickness = 0.3
+support_interface_enable = True
+support_z_distance = 0
+
diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.8_bvoh_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.8_bvoh_0.2mm.inst.cfg
new file mode 100644
index 0000000000..58875826ad
--- /dev/null
+++ b/resources/quality/ultimaker_s5/um_s5_bb0.8_bvoh_0.2mm.inst.cfg
@@ -0,0 +1,34 @@
+[general]
+definition = ultimaker_s5
+name = Fast
+version = 4
+
+[metadata]
+material = generic_bvoh
+quality_type = draft
+setting_version = 25
+type = quality
+variant = BB 0.8
+weight = -2
+
+[values]
+acceleration_prime_tower = 1500
+acceleration_support = 1500
+brim_replaces_support = False
+build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
+cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
+default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
+initial_layer_line_width_factor = 150
+jerk_prime_tower = 20
+jerk_support = 20
+minimum_support_area = 4
+retraction_amount = 6.5
+retraction_count_max = 5
+skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width))
+speed_prime_tower = 50
+speed_support = 50
+speed_support_interface = 50
+support_bottom_density = 70
+support_interface_enable = True
+support_z_distance = 0
+
diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.8_bvoh_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.8_bvoh_0.3mm.inst.cfg
new file mode 100644
index 0000000000..74b33f5366
--- /dev/null
+++ b/resources/quality/ultimaker_s5/um_s5_bb0.8_bvoh_0.3mm.inst.cfg
@@ -0,0 +1,36 @@
+[general]
+definition = ultimaker_s5
+name = Extra Fast
+version = 4
+
+[metadata]
+material = generic_bvoh
+quality_type = verydraft
+setting_version = 25
+type = quality
+variant = BB 0.8
+weight = -3
+
+[values]
+acceleration_prime_tower = 1500
+acceleration_support = 1500
+brim_replaces_support = False
+build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
+cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
+default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
+initial_layer_line_width_factor = 150
+jerk_prime_tower = 20
+jerk_support = 20
+material_print_temperature = =default_material_print_temperature + 5
+minimum_support_area = 4
+retraction_amount = 6.5
+retraction_count_max = 5
+skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width))
+speed_prime_tower = 50
+speed_support = 50
+speed_support_interface = 50
+support_bottom_density = 70
+support_infill_sparse_thickness = 0.3
+support_interface_enable = True
+support_z_distance = 0
+
diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.8_bvoh_0.4mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.8_bvoh_0.4mm.inst.cfg
new file mode 100644
index 0000000000..cd501dcf0e
--- /dev/null
+++ b/resources/quality/ultimaker_s5/um_s5_bb0.8_bvoh_0.4mm.inst.cfg
@@ -0,0 +1,35 @@
+[general]
+definition = ultimaker_s5
+name = Sprint
+version = 4
+
+[metadata]
+material = generic_bvoh
+quality_type = superdraft
+setting_version = 25
+type = quality
+variant = BB 0.8
+weight = -4
+
+[values]
+acceleration_prime_tower = 1500
+acceleration_support = 1500
+brim_replaces_support = False
+build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
+cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
+default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
+initial_layer_line_width_factor = 150
+jerk_prime_tower = 20
+jerk_support = 20
+material_print_temperature = =default_material_print_temperature + 5
+minimum_support_area = 4
+retraction_amount = 6.5
+retraction_count_max = 5
+skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width))
+speed_prime_tower = 50
+speed_support = 50
+speed_support_interface = 50
+support_bottom_density = 70
+support_interface_enable = True
+support_z_distance = 0
+
diff --git a/resources/quality/ultimaker_s8/um_s8_bb0.4_bvoh_0.15mm.inst.cfg b/resources/quality/ultimaker_s8/um_s8_bb0.4_bvoh_0.15mm.inst.cfg
new file mode 100644
index 0000000000..e10db6b743
--- /dev/null
+++ b/resources/quality/ultimaker_s8/um_s8_bb0.4_bvoh_0.15mm.inst.cfg
@@ -0,0 +1,35 @@
+[general]
+definition = ultimaker_s8
+name = Normal
+version = 4
+
+[metadata]
+material = generic_bvoh
+quality_type = fast
+setting_version = 25
+type = quality
+variant = BB 0.4
+weight = -1
+
+[values]
+acceleration_prime_tower = 1500
+acceleration_support = 1500
+brim_replaces_support = False
+build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
+cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
+default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
+initial_layer_line_width_factor = 150
+jerk_prime_tower = 4000
+jerk_support = 4000
+minimum_support_area = 4
+retraction_amount = 6.5
+retraction_count_max = 5
+skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width))
+speed_prime_tower = 50
+speed_support = 50
+speed_support_interface = 50
+support_bottom_density = 70
+support_infill_sparse_thickness = =2 * layer_height
+support_interface_enable = True
+support_z_distance = 0
+
diff --git a/resources/quality/ultimaker_s8/um_s8_bb0.4_bvoh_0.1mm.inst.cfg b/resources/quality/ultimaker_s8/um_s8_bb0.4_bvoh_0.1mm.inst.cfg
new file mode 100644
index 0000000000..9c5d0e9bd8
--- /dev/null
+++ b/resources/quality/ultimaker_s8/um_s8_bb0.4_bvoh_0.1mm.inst.cfg
@@ -0,0 +1,36 @@
+[general]
+definition = ultimaker_s8
+name = Fine
+version = 4
+
+[metadata]
+material = generic_bvoh
+quality_type = normal
+setting_version = 25
+type = quality
+variant = BB 0.4
+weight = 0
+
+[values]
+acceleration_prime_tower = 1500
+acceleration_support = 1500
+brim_replaces_support = False
+build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
+cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
+default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
+initial_layer_line_width_factor = 150
+jerk_prime_tower = 4000
+jerk_support = 4000
+material_print_temperature = =default_material_print_temperature - 5
+minimum_support_area = 4
+retraction_amount = 6.5
+retraction_count_max = 5
+skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width))
+speed_prime_tower = 50
+speed_support = 50
+speed_support_interface = 50
+support_bottom_density = 70
+support_infill_sparse_thickness = =2 * layer_height
+support_interface_enable = True
+support_z_distance = 0
+
diff --git a/resources/quality/ultimaker_s8/um_s8_bb0.4_bvoh_0.2mm.inst.cfg b/resources/quality/ultimaker_s8/um_s8_bb0.4_bvoh_0.2mm.inst.cfg
new file mode 100644
index 0000000000..8f4c52d7b5
--- /dev/null
+++ b/resources/quality/ultimaker_s8/um_s8_bb0.4_bvoh_0.2mm.inst.cfg
@@ -0,0 +1,35 @@
+[general]
+definition = ultimaker_s8
+name = Fast
+version = 4
+
+[metadata]
+material = generic_bvoh
+quality_type = draft
+setting_version = 25
+type = quality
+variant = BB 0.4
+weight = -2
+
+[values]
+acceleration_prime_tower = 1500
+acceleration_support = 1500
+brim_replaces_support = False
+build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
+cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
+default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
+initial_layer_line_width_factor = 150
+jerk_prime_tower = 4000
+jerk_support = 4000
+material_print_temperature = =default_material_print_temperature + 5
+minimum_support_area = 4
+retraction_amount = 6.5
+retraction_count_max = 5
+skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width))
+speed_prime_tower = 50
+speed_support = 50
+speed_support_interface = 50
+support_bottom_density = 70
+support_interface_enable = True
+support_z_distance = 0
+
diff --git a/resources/quality/ultimaker_s8/um_s8_bb0.4_bvoh_0.3mm.inst.cfg b/resources/quality/ultimaker_s8/um_s8_bb0.4_bvoh_0.3mm.inst.cfg
new file mode 100644
index 0000000000..e37500de1a
--- /dev/null
+++ b/resources/quality/ultimaker_s8/um_s8_bb0.4_bvoh_0.3mm.inst.cfg
@@ -0,0 +1,37 @@
+[general]
+definition = ultimaker_s8
+name = Extra Fast - Experimental
+version = 4
+
+[metadata]
+is_experimental = True
+material = generic_bvoh
+quality_type = verydraft
+setting_version = 25
+type = quality
+variant = BB 0.4
+weight = -3
+
+[values]
+acceleration_prime_tower = 1500
+acceleration_support = 1500
+brim_replaces_support = False
+build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
+cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
+default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
+initial_layer_line_width_factor = 150
+jerk_prime_tower = 4000
+jerk_support = 4000
+material_print_temperature = =default_material_print_temperature - 5
+minimum_support_area = 4
+retraction_amount = 6.5
+retraction_count_max = 5
+skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width))
+speed_prime_tower = 50
+speed_support = 50
+speed_support_interface = 50
+support_bottom_density = 70
+support_infill_sparse_thickness = 0.3
+support_interface_enable = True
+support_z_distance = 0
+
diff --git a/resources/quality/ultimaker_s8/um_s8_bb0.8_bvoh_0.2mm.inst.cfg b/resources/quality/ultimaker_s8/um_s8_bb0.8_bvoh_0.2mm.inst.cfg
new file mode 100644
index 0000000000..9a8e2a51c4
--- /dev/null
+++ b/resources/quality/ultimaker_s8/um_s8_bb0.8_bvoh_0.2mm.inst.cfg
@@ -0,0 +1,34 @@
+[general]
+definition = ultimaker_s8
+name = Fast
+version = 4
+
+[metadata]
+material = generic_bvoh
+quality_type = draft
+setting_version = 25
+type = quality
+variant = BB 0.8
+weight = -2
+
+[values]
+acceleration_prime_tower = 1500
+acceleration_support = 1500
+brim_replaces_support = False
+build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
+cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
+default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
+initial_layer_line_width_factor = 150
+jerk_prime_tower = 4000
+jerk_support = 4000
+minimum_support_area = 4
+retraction_amount = 6.5
+retraction_count_max = 5
+skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width))
+speed_prime_tower = 50
+speed_support = 50
+speed_support_interface = 50
+support_bottom_density = 70
+support_interface_enable = True
+support_z_distance = 0
+
diff --git a/resources/quality/ultimaker_s8/um_s8_bb0.8_bvoh_0.3mm.inst.cfg b/resources/quality/ultimaker_s8/um_s8_bb0.8_bvoh_0.3mm.inst.cfg
new file mode 100644
index 0000000000..f325937cb9
--- /dev/null
+++ b/resources/quality/ultimaker_s8/um_s8_bb0.8_bvoh_0.3mm.inst.cfg
@@ -0,0 +1,36 @@
+[general]
+definition = ultimaker_s8
+name = Extra Fast
+version = 4
+
+[metadata]
+material = generic_bvoh
+quality_type = verydraft
+setting_version = 25
+type = quality
+variant = BB 0.8
+weight = -3
+
+[values]
+acceleration_prime_tower = 1500
+acceleration_support = 1500
+brim_replaces_support = False
+build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
+cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
+default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
+initial_layer_line_width_factor = 150
+jerk_prime_tower = 4000
+jerk_support = 4000
+material_print_temperature = =default_material_print_temperature + 5
+minimum_support_area = 4
+retraction_amount = 6.5
+retraction_count_max = 5
+skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width))
+speed_prime_tower = 50
+speed_support = 50
+speed_support_interface = 50
+support_bottom_density = 70
+support_infill_sparse_thickness = 0.3
+support_interface_enable = True
+support_z_distance = 0
+
diff --git a/resources/quality/ultimaker_s8/um_s8_bb0.8_bvoh_0.4mm.inst.cfg b/resources/quality/ultimaker_s8/um_s8_bb0.8_bvoh_0.4mm.inst.cfg
new file mode 100644
index 0000000000..e26028fdc1
--- /dev/null
+++ b/resources/quality/ultimaker_s8/um_s8_bb0.8_bvoh_0.4mm.inst.cfg
@@ -0,0 +1,35 @@
+[general]
+definition = ultimaker_s8
+name = Sprint
+version = 4
+
+[metadata]
+material = generic_bvoh
+quality_type = superdraft
+setting_version = 25
+type = quality
+variant = BB 0.8
+weight = -4
+
+[values]
+acceleration_prime_tower = 1500
+acceleration_support = 1500
+brim_replaces_support = False
+build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
+cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
+default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
+initial_layer_line_width_factor = 150
+jerk_prime_tower = 4000
+jerk_support = 4000
+material_print_temperature = =default_material_print_temperature + 5
+minimum_support_area = 4
+retraction_amount = 6.5
+retraction_count_max = 5
+skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width))
+speed_prime_tower = 50
+speed_support = 50
+speed_support_interface = 50
+support_bottom_density = 70
+support_interface_enable = True
+support_z_distance = 0
+