Merge branch 'main' into Cura_ankermake_august

resources/quality/dagoma/dagoma_sigma_pro_brass_0.4_pla_h0.1.inst.cfg

@@ -0,0 +1,74 @@
+[general]
+definition = dagoma_sigma_pro
+name = Fine
+version = 4
+
+[metadata]
+material = generic_pla
+quality_type = h0.1
+setting_version = 22
+type = quality
+variant = Brass 0.4mm
+weight = 1
+
+[values]
+adhesion_type = brim
+bridge_settings_enabled = True
+brim_width = 2
+coasting_enable = True
+coasting_volume = 0.06
+cool_fan_full_layer = 5
+cool_min_layer_time = 7
+cool_min_temperature = 195
+infill_material_flow = 105
+infill_sparse_density = 15
+material_final_print_temperature = 196
+material_flow_layer_0 = 100
+material_initial_print_temperature = 196
+material_print_temperature = 196
+material_print_temperature_layer_0 = 196
+material_standby_temperature = 195
+ooze_shield_enabled = False
+prime_tower_brim_enable = True
+prime_tower_enable = True
+prime_tower_min_volume = 44
+prime_tower_size = 25
+prime_tower_wipe_enabled = False
+retraction_amount = 3.0
+retraction_combing = infill
+retraction_hop = 0.4
+retraction_hop_after_extruder_switch_height = 0
+retraction_hop_enabled = True
+retraction_prime_speed = 45
+retraction_retract_speed = 60
+retraction_speed = 80
+smooth_spiralized_contours = False
+speed_infill = 80
+speed_layer_0 = 22
+speed_prime_tower = 70
+speed_print = 35
+speed_slowdown_layers = 3
+speed_topbottom = 35
+speed_travel = 180
+speed_travel_layer_0 = 70
+speed_wall_0 = 25
+speed_wall_x = 35.0
+speed_z_hop = 120
+support_enable = False
+support_structure = tree
+support_tree_angle = 55
+support_tree_top_rate = =30 if support_roof_enable else 10
+switch_extruder_extra_prime_amount = 0
+switch_extruder_prime_speed = 20
+switch_extruder_retraction_amount = 80
+switch_extruder_retraction_speed = =switch_extruder_retraction_speeds
+switch_extruder_retraction_speeds = 80
+travel_avoid_distance = 2.0
+travel_avoid_other_parts = False
+travel_avoid_supports = True
+wall_0_material_flow = =wall_material_flow
+wall_0_material_flow_layer_0 = 85
+wall_thickness = 0.8
+wall_transition_length = 0.4
+wall_x_material_flow_layer_0 = 90
+

resources/quality/dagoma/dagoma_sigma_pro_brass_0.4_pla_h0.2.inst.cfg

@@ -0,0 +1,74 @@
+[general]
+definition = dagoma_sigma_pro
+name = Normal
+version = 4
+
+[metadata]
+material = generic_pla
+quality_type = h0.2
+setting_version = 22
+type = quality
+variant = Brass 0.4mm
+weight = 1
+
+[values]
+adhesion_type = brim
+bridge_settings_enabled = True
+brim_width = 2
+coasting_enable = True
+coasting_volume = 0.06
+cool_fan_full_layer = 5
+cool_min_layer_time = 7
+cool_min_temperature = 195
+infill_material_flow = 105
+infill_sparse_density = 15
+material_final_print_temperature = 200
+material_flow_layer_0 = 100
+material_initial_print_temperature = 200
+material_print_temperature = 200
+material_print_temperature_layer_0 = 200
+material_standby_temperature = 195
+ooze_shield_enabled = False
+prime_tower_brim_enable = True
+prime_tower_enable = True
+prime_tower_min_volume = 44
+prime_tower_size = 25
+prime_tower_wipe_enabled = False
+retraction_amount = 3.0
+retraction_combing = infill
+retraction_hop = 0.4
+retraction_hop_after_extruder_switch_height = 0
+retraction_hop_enabled = True
+retraction_prime_speed = 45
+retraction_retract_speed = 60
+retraction_speed = 80
+smooth_spiralized_contours = False
+speed_infill = 80
+speed_layer_0 = 22
+speed_prime_tower = 70
+speed_print = 35
+speed_slowdown_layers = 3
+speed_topbottom = 35
+speed_travel = 180
+speed_travel_layer_0 = 70
+speed_wall_0 = 25
+speed_wall_x = 35.0
+speed_z_hop = 120
+support_enable = False
+support_structure = tree
+support_tree_angle = 55
+support_tree_top_rate = =30 if support_roof_enable else 10
+switch_extruder_extra_prime_amount = 0
+switch_extruder_prime_speed = 20
+switch_extruder_retraction_amount = 80
+switch_extruder_retraction_speed = =switch_extruder_retraction_speeds
+switch_extruder_retraction_speeds = 80
+travel_avoid_distance = 2.0
+travel_avoid_other_parts = False
+travel_avoid_supports = True
+wall_0_material_flow = =wall_material_flow
+wall_0_material_flow_layer_0 = 85
+wall_thickness = 1.2
+wall_transition_length = 0.4
+wall_x_material_flow_layer_0 = 90
+

resources/quality/dagoma/dagoma_sigma_pro_brass_0.4_pla_h0.3.inst.cfg

@@ -0,0 +1,15 @@
+[general]
+definition = dagoma_sigma_pro
+name = Draft
+version = 4
+
+[metadata]
+material = generic_pla
+quality_type = h0.3
+setting_version = 22
+type = quality
+variant = Brass 0.4mm
+weight = 1
+
+[values]
+

resources/quality/dagoma/dagoma_sigma_pro_brass_0.8_pla_h0.2.inst.cfg

@@ -0,0 +1,15 @@
+[general]
+definition = dagoma_sigma_pro
+name = Normal
+version = 4
+
+[metadata]
+material = generic_pla
+quality_type = h0.2
+setting_version = 22
+type = quality
+variant = Brass 0.8mm
+weight = 1
+
+[values]
+

resources/quality/dagoma/dagoma_sigma_pro_brass_0.8_pla_h0.4.inst.cfg

@@ -0,0 +1,15 @@
+[general]
+definition = dagoma_sigma_pro
+name = Fast
+version = 4
+
+[metadata]
+material = generic_pla
+quality_type = h0.4
+setting_version = 22
+type = quality
+variant = Brass 0.8mm
+weight = 1
+
+[values]
+

resources/quality/dagoma/dagoma_sigma_pro_brass_0.8_pla_h0.6.inst.cfg

@@ -0,0 +1,15 @@
+[general]
+definition = dagoma_sigma_pro
+name = Very Fast
+version = 4
+
+[metadata]
+material = generic_pla
+quality_type = h0.6
+setting_version = 22
+type = quality
+variant = Brass 0.8mm
+weight = 1
+
+[values]
+

resources/quality/dagoma/dagoma_sigma_pro_dual_brass_0.4_pla_h0.1.inst.cfg

@@ -0,0 +1,75 @@
+[general]
+definition = dagoma_sigma_pro_dual
+name = Fine
+version = 4
+
+[metadata]
+material = generic_pla
+quality_type = h0.1
+setting_version = 22
+type = quality
+variant = Brass 0.4mm
+weight = 1
+
+[values]
+adhesion_type = brim
+bridge_settings_enabled = True
+brim_width = 2
+coasting_enable = True
+coasting_volume = 0.1
+cool_fan_full_layer = 5
+cool_min_layer_time = 7
+cool_min_temperature = 195
+infill_material_flow = 105
+infill_sparse_density = 15
+material_final_print_temperature = 196
+material_flow_layer_0 = 100
+material_initial_print_temperature = 196
+material_print_temperature = 196
+material_print_temperature_layer_0 = 196
+material_standby_temperature = 196
+ooze_shield_enabled = False
+prime_tower_brim_enable = True
+prime_tower_enable = True
+prime_tower_min_volume = 24
+prime_tower_size = 25
+prime_tower_wipe_enabled = True
+retraction_amount = 10
+retraction_combing = infill
+retraction_extrusion_window = 10.0
+retraction_hop = 0.4
+retraction_hop_after_extruder_switch_height = 0
+retraction_hop_enabled = True
+retraction_prime_speed = 60
+retraction_retract_speed = 90
+retraction_speed = 80
+smooth_spiralized_contours = False
+speed_infill = 80
+speed_layer_0 = 22
+speed_prime_tower = 70
+speed_print = 35
+speed_slowdown_layers = 3
+speed_topbottom = 35
+speed_travel = 180
+speed_travel_layer_0 = 70
+speed_wall_0 = 25
+speed_wall_x = 35.0
+speed_z_hop = 120
+support_enable = False
+support_structure = tree
+support_tree_angle = 55
+support_tree_top_rate = =30 if support_roof_enable else 10
+switch_extruder_extra_prime_amount = 0
+switch_extruder_prime_speed = 20
+switch_extruder_retraction_amount = 0
+switch_extruder_retraction_speed = =switch_extruder_retraction_speeds
+switch_extruder_retraction_speeds = 75
+travel_avoid_distance = 2.0
+travel_avoid_other_parts = False
+travel_avoid_supports = True
+wall_0_material_flow = =wall_material_flow
+wall_0_material_flow_layer_0 = 85
+wall_thickness = 1.2
+wall_transition_length = 0.4
+wall_x_material_flow_layer_0 = 90
+

resources/quality/dagoma/dagoma_sigma_pro_dual_brass_0.4_pla_h0.2.inst.cfg

@@ -0,0 +1,75 @@
+[general]
+definition = dagoma_sigma_pro_dual
+name = Normal
+version = 4
+
+[metadata]
+material = generic_pla
+quality_type = h0.2
+setting_version = 22
+type = quality
+variant = Brass 0.4mm
+weight = 1
+
+[values]
+adhesion_type = brim
+bridge_settings_enabled = True
+brim_width = 2
+coasting_enable = True
+coasting_volume = 0.1
+cool_fan_full_layer = 5
+cool_min_layer_time = 7
+cool_min_temperature = 195
+infill_material_flow = 105
+infill_sparse_density = 15
+material_final_print_temperature = 200
+material_flow_layer_0 = 100
+material_initial_print_temperature = 200
+material_print_temperature = 200
+material_print_temperature_layer_0 = =material_print_temperature
+material_standby_temperature = 200
+ooze_shield_enabled = False
+prime_tower_brim_enable = True
+prime_tower_enable = True
+prime_tower_min_volume = 44
+prime_tower_size = 25
+prime_tower_wipe_enabled = True
+retraction_amount = 10
+retraction_combing = infill
+retraction_extrusion_window = 10.0
+retraction_hop = 0.4
+retraction_hop_after_extruder_switch_height = 0
+retraction_hop_enabled = True
+retraction_prime_speed = 60
+retraction_retract_speed = 90
+retraction_speed = 80
+smooth_spiralized_contours = False
+speed_infill = 80
+speed_layer_0 = 22
+speed_prime_tower = 70
+speed_print = 35
+speed_slowdown_layers = 3
+speed_topbottom = 35
+speed_travel = 180
+speed_travel_layer_0 = 70
+speed_wall_0 = 25
+speed_wall_x = 35.0
+speed_z_hop = 120
+support_enable = False
+support_structure = tree
+support_tree_angle = 55
+support_tree_top_rate = =30 if support_roof_enable else 10
+switch_extruder_extra_prime_amount = 0
+switch_extruder_prime_speed = 20
+switch_extruder_retraction_amount = 0
+switch_extruder_retraction_speed = =switch_extruder_retraction_speeds
+switch_extruder_retraction_speeds = 75
+travel_avoid_distance = 2.0
+travel_avoid_other_parts = False
+travel_avoid_supports = True
+wall_0_material_flow = =wall_material_flow
+wall_0_material_flow_layer_0 = 85
+wall_thickness = 1.2
+wall_transition_length = 0.4
+wall_x_material_flow_layer_0 = 90
+

resources/quality/dagoma/dagoma_sigma_pro_dual_brass_0.4_pla_h0.3.inst.cfg

@@ -0,0 +1,15 @@
+[general]
+definition = dagoma_sigma_pro_dual
+name = Draft
+version = 4
+
+[metadata]
+material = generic_pla
+quality_type = h0.3
+setting_version = 22
+type = quality
+variant = Brass 0.4mm
+weight = 1
+
+[values]
+

resources/quality/dagoma/dagoma_sigma_pro_dual_brass_0.8_pla_h0.2.inst.cfg

@@ -0,0 +1,15 @@
+[general]
+definition = dagoma_sigma_pro_dual
+name = Normal
+version = 4
+
+[metadata]
+material = generic_pla
+quality_type = h0.2
+setting_version = 22
+type = quality
+variant = Brass 0.8mm
+weight = 1
+
+[values]
+

resources/quality/dagoma/dagoma_sigma_pro_dual_brass_0.8_pla_h0.4.inst.cfg

@@ -0,0 +1,15 @@
+[general]
+definition = dagoma_sigma_pro_dual
+name = Fast
+version = 4
+
+[metadata]
+material = generic_pla
+quality_type = h0.4
+setting_version = 22
+type = quality
+variant = Brass 0.8mm
+weight = 1
+
+[values]
+

resources/quality/dagoma/dagoma_sigma_pro_dual_brass_0.8_pla_h0.6.inst.cfg

@@ -0,0 +1,15 @@
+[general]
+definition = dagoma_sigma_pro_dual
+name = Very Fast
+version = 4
+
+[metadata]
+material = generic_pla
+quality_type = h0.6
+setting_version = 22
+type = quality
+variant = Brass 0.8mm
+weight = 1
+
+[values]
+

resources/quality/dagoma/dagoma_sigma_pro_dual_global_h0.1.inst.cfg

@@ -0,0 +1,16 @@
+[general]
+definition = dagoma_sigma_pro_dual
+name = Fine
+version = 4
+
+[metadata]
+global_quality = True
+material = generic_pla
+quality_type = h0.1
+setting_version = 22
+type = quality
+weight = 1
+
+[values]
+layer_height = 0.1
+

resources/quality/dagoma/dagoma_sigma_pro_dual_global_h0.2.inst.cfg

@@ -0,0 +1,16 @@
+[general]
+definition = dagoma_sigma_pro_dual
+name = Normal
+version = 4
+
+[metadata]
+global_quality = True
+material = generic_pla
+quality_type = h0.2
+setting_version = 22
+type = quality
+weight = 1
+
+[values]
+layer_height = 0.2
+

resources/quality/dagoma/dagoma_sigma_pro_dual_global_h0.3.inst.cfg

@@ -0,0 +1,16 @@
+[general]
+definition = dagoma_sigma_pro_dual
+name = Draft
+version = 4
+
+[metadata]
+global_quality = True
+material = generic_pla
+quality_type = h0.3
+setting_version = 22
+type = quality
+weight = 1
+
+[values]
+layer_height = 0.3
+

resources/quality/dagoma/dagoma_sigma_pro_dual_global_h0.4.inst.cfg

@@ -0,0 +1,16 @@
+[general]
+definition = dagoma_sigma_pro_dual
+name = Fast
+version = 4
+
+[metadata]
+global_quality = True
+material = generic_pla
+quality_type = h0.4
+setting_version = 22
+type = quality
+weight = 1
+
+[values]
+layer_height = 0.4
+

resources/quality/dagoma/dagoma_sigma_pro_dual_global_h0.6.inst.cfg

@@ -0,0 +1,16 @@
+[general]
+definition = dagoma_sigma_pro_dual
+name = Very Fast
+version = 4
+
+[metadata]
+global_quality = True
+material = generic_pla
+quality_type = h0.6
+setting_version = 22
+type = quality
+weight = 1
+
+[values]
+layer_height = 0.6
+

resources/quality/dagoma/dagoma_sigma_pro_dual_steel_0.4_pla_h0.1.inst.cfg

@@ -0,0 +1,15 @@
+[general]
+definition = dagoma_sigma_pro_dual
+name = Fine
+version = 4
+
+[metadata]
+material = generic_pla
+quality_type = h0.1
+setting_version = 22
+type = quality
+variant = Steel 0.4mm
+weight = 1
+
+[values]
+

resources/quality/dagoma/dagoma_sigma_pro_dual_steel_0.4_pla_h0.2.inst.cfg

@@ -0,0 +1,15 @@
+[general]
+definition = dagoma_sigma_pro_dual
+name = Normal
+version = 4
+
+[metadata]
+material = generic_pla
+quality_type = h0.2
+setting_version = 22
+type = quality
+variant = Steel 0.4mm
+weight = 1
+
+[values]
+

resources/quality/dagoma/dagoma_sigma_pro_dual_steel_0.4_pla_h0.3.inst.cfg

@@ -0,0 +1,15 @@
+[general]
+definition = dagoma_sigma_pro_dual
+name = Draft
+version = 4
+
+[metadata]
+material = generic_pla
+quality_type = h0.3
+setting_version = 22
+type = quality
+variant = Steel 0.4mm
+weight = 1
+
+[values]
+

resources/quality/dagoma/dagoma_sigma_pro_dual_steel_0.8_pla_h0.2.inst.cfg

@@ -0,0 +1,15 @@
+[general]
+definition = dagoma_sigma_pro_dual
+name = Normal
+version = 4
+
+[metadata]
+material = generic_pla
+quality_type = h0.2
+setting_version = 22
+type = quality
+variant = Steel 0.8mm
+weight = 1
+
+[values]
+

resources/quality/dagoma/dagoma_sigma_pro_dual_steel_0.8_pla_h0.4.inst.cfg

@@ -0,0 +1,15 @@
+[general]
+definition = dagoma_sigma_pro_dual
+name = Fast
+version = 4
+
+[metadata]
+material = generic_pla
+quality_type = h0.4
+setting_version = 22
+type = quality
+variant = Steel 0.8mm
+weight = 1
+
+[values]
+

resources/quality/dagoma/dagoma_sigma_pro_dual_steel_0.8_pla_h0.6.inst.cfg

@@ -0,0 +1,15 @@
+[general]
+definition = dagoma_sigma_pro_dual
+name = Very Fast
+version = 4
+
+[metadata]
+material = generic_pla
+quality_type = h0.6
+setting_version = 22
+type = quality
+variant = Steel 0.8mm
+weight = 1
+
+[values]
+

resources/quality/dagoma/dagoma_sigma_pro_global_h0.1.inst.cfg

@@ -0,0 +1,16 @@
+[general]
+definition = dagoma_sigma_pro
+name = Fine
+version = 4
+
+[metadata]
+global_quality = True
+material = generic_pla
+quality_type = h0.1
+setting_version = 22
+type = quality
+weight = 1
+
+[values]
+layer_height = 0.1
+

resources/quality/dagoma/dagoma_sigma_pro_global_h0.2.inst.cfg

@@ -0,0 +1,16 @@
+[general]
+definition = dagoma_sigma_pro
+name = Normal
+version = 4
+
+[metadata]
+global_quality = True
+material = generic_pla
+quality_type = h0.2
+setting_version = 22
+type = quality
+weight = 1
+
+[values]
+layer_height = 0.2
+

resources/quality/dagoma/dagoma_sigma_pro_global_h0.3.inst.cfg

@@ -0,0 +1,16 @@
+[general]
+definition = dagoma_sigma_pro
+name = Draft
+version = 4
+
+[metadata]
+global_quality = True
+material = generic_pla
+quality_type = h0.3
+setting_version = 22
+type = quality
+weight = 1
+
+[values]
+layer_height = 0.3
+

resources/quality/dagoma/dagoma_sigma_pro_global_h0.4.inst.cfg

@@ -0,0 +1,16 @@
+[general]
+definition = dagoma_sigma_pro
+name = Fast
+version = 4
+
+[metadata]
+global_quality = True
+material = generic_pla
+quality_type = h0.4
+setting_version = 22
+type = quality
+weight = 1
+
+[values]
+layer_height = 0.4
+

resources/quality/dagoma/dagoma_sigma_pro_global_h0.6.inst.cfg

@@ -0,0 +1,16 @@
+[general]
+definition = dagoma_sigma_pro
+name = Very Fast
+version = 4
+
+[metadata]
+global_quality = True
+material = generic_pla
+quality_type = h0.6
+setting_version = 22
+type = quality
+weight = 1
+
+[values]
+layer_height = 0.6
+

resources/quality/dagoma/dagoma_sigma_pro_steel_0.4_pla_h0.1.inst.cfg

@@ -0,0 +1,15 @@
+[general]
+definition = dagoma_sigma_pro
+name = Fine
+version = 4
+
+[metadata]
+material = generic_pla
+quality_type = h0.1
+setting_version = 22
+type = quality
+variant = Steel 0.4mm
+weight = 1
+
+[values]
+

resources/quality/dagoma/dagoma_sigma_pro_steel_0.4_pla_h0.2.inst.cfg

@@ -0,0 +1,15 @@
+[general]
+definition = dagoma_sigma_pro
+name = Normal
+version = 4
+
+[metadata]
+material = generic_pla
+quality_type = h0.2
+setting_version = 22
+type = quality
+variant = Steel 0.4mm
+weight = 1
+
+[values]
+

resources/quality/dagoma/dagoma_sigma_pro_steel_0.4_pla_h0.3.inst.cfg

@@ -0,0 +1,15 @@
+[general]
+definition = dagoma_sigma_pro
+name = Draft
+version = 4
+
+[metadata]
+material = generic_pla
+quality_type = h0.3
+setting_version = 22
+type = quality
+variant = Steel 0.4mm
+weight = 1
+
+[values]
+

resources/quality/dagoma/dagoma_sigma_pro_steel_0.8_pla_h0.2.inst.cfg

@@ -0,0 +1,15 @@
+[general]
+definition = dagoma_sigma_pro
+name = Normal
+version = 4
+
+[metadata]
+material = generic_pla
+quality_type = h0.2
+setting_version = 22
+type = quality
+variant = Steel 0.8mm
+weight = 1
+
+[values]
+

resources/quality/dagoma/dagoma_sigma_pro_steel_0.8_pla_h0.4.inst.cfg

@@ -0,0 +1,15 @@
+[general]
+definition = dagoma_sigma_pro
+name = Fast
+version = 4
+
+[metadata]
+material = generic_pla
+quality_type = h0.4
+setting_version = 22
+type = quality
+variant = Steel 0.8mm
+weight = 1
+
+[values]
+

resources/quality/dagoma/dagoma_sigma_pro_steel_0.8_pla_h0.6.inst.cfg

@@ -0,0 +1,15 @@
+[general]
+definition = dagoma_sigma_pro
+name = Very Fast
+version = 4
+
+[metadata]
+material = generic_pla
+quality_type = h0.6
+setting_version = 22
+type = quality
+variant = Steel 0.8mm
+weight = 1
+
+[values]
+

resources/quality/ultimaker_methodx/um_methodx_1c_um-asa-175_0.2mm.inst.cfg

@@ -0,0 +1,50 @@
+[general]
+definition = ultimaker_methodx
+name = Fast - Experimental
+version = 4
+
+[metadata]
+is_experimental = True
+material = ultimaker_asa_175
+quality_type = draft
+setting_version = 22
+type = quality
+variant = 1C
+weight = -2
+
+[values]
+cool_fan_enabled = False
+material_print_temperature_layer_0 = =default_material_print_temperature+5
+raft_airgap = 0.3
+raft_base_speed = 10
+retract_at_layer_change = True
+retraction_amount = 0.5
+retraction_min_travel = 3.2
+roofing_material_flow = 98.0
+small_skin_width = 3.6
+speed_prime_tower = 30.0
+speed_print = 120.0
+speed_roofing = 55
+speed_topbottom = 55
+speed_travel = 250.0
+speed_wall_0 = 45
+speed_wall_x = 65
+support_angle = 50
+support_bottom_density = 24
+support_bottom_enable = False
+support_bottom_line_width = 0.6
+support_bottom_stair_step_height = 0
+support_fan_enable = False
+support_infill_rate = 12.0
+support_interface_enable = True
+support_interface_pattern = lines
+support_line_width = 0.3
+support_pattern = lines
+support_roof_density = 97
+support_roof_height = 1.015
+support_roof_line_width = 0.25
+support_use_towers = False
+support_xy_distance = 0.2
+support_xy_distance_overhang = 0.15
+support_z_distance = 0.25
+

resources/quality/ultimaker_methodx/um_methodx_1c_um-nylon12-cf-175_0.2mm.inst.cfg

@@ -0,0 +1,53 @@
+[general]
+definition = ultimaker_methodx
+name = Fast - Experimental
+version = 4
+
+[metadata]
+is_experimental = True
+material = ultimaker_nylon12-cf_175
+quality_type = draft
+setting_version = 22
+type = quality
+variant = 1C
+weight = -2
+
+[values]
+cool_fan_enabled = False
+material_final_print_temperature = =default_material_print_temperature-5
+material_initial_print_temperature = =default_material_print_temperature-5
+raft_airgap = 0.3
+raft_base_line_spacing = 3
+raft_base_line_width = 1.2
+raft_base_speed = 10
+retract_at_layer_change = True
+retraction_amount = 0.5
+retraction_min_travel = 3.2
+roofing_material_flow = 100
+small_skin_width = 3.6
+speed_prime_tower = 30.0
+speed_print = 120.0
+speed_roofing = 55
+speed_topbottom = 55
+speed_travel = 250.0
+speed_wall_0 = 45
+speed_wall_x = 65
+support_angle = 50
+support_bottom_density = 24
+support_bottom_enable = False
+support_bottom_line_width = 0.6
+support_bottom_stair_step_height = 0
+support_fan_enable = False
+support_infill_rate = 12.0
+support_interface_enable = True
+support_interface_pattern = lines
+support_line_width = 0.3
+support_pattern = lines
+support_roof_density = 97
+support_roof_height = 1.015
+support_roof_line_width = 0.25
+support_use_towers = False
+support_xy_distance = 0.2
+support_xy_distance_overhang = 0.15
+support_z_distance = 0.25
+

resources/quality/ultimaker_methodx/um_methodx_1xa_um-asa-175_0.2mm.inst.cfg

@@ -0,0 +1,50 @@
+[general]
+definition = ultimaker_methodx
+name = Fast - Experimental
+version = 4
+
+[metadata]
+is_experimental = True
+material = ultimaker_asa_175
+quality_type = draft
+setting_version = 22
+type = quality
+variant = 1XA
+weight = -2
+
+[values]
+cool_fan_enabled = False
+material_print_temperature_layer_0 = =default_material_print_temperature+5
+raft_airgap = 0.3
+raft_base_speed = 10
+retract_at_layer_change = True
+retraction_amount = 0.5
+retraction_min_travel = 3.2
+roofing_material_flow = 98.0
+small_skin_width = 3.6
+speed_prime_tower = 30.0
+speed_print = 120.0
+speed_roofing = 55
+speed_topbottom = 55
+speed_travel = 250.0
+speed_wall_0 = 45
+speed_wall_x = 65
+support_angle = 50
+support_bottom_density = 24
+support_bottom_enable = False
+support_bottom_line_width = 0.6
+support_bottom_stair_step_height = 0
+support_fan_enable = False
+support_infill_rate = 12.0
+support_interface_enable = True
+support_interface_pattern = lines
+support_line_width = 0.3
+support_pattern = lines
+support_roof_density = 97
+support_roof_height = 1.015
+support_roof_line_width = 0.25
+support_use_towers = False
+support_xy_distance = 0.2
+support_xy_distance_overhang = 0.15
+support_z_distance = 0.25
+

resources/quality/ultimaker_methodx/um_methodx_2xa_um-sr30-175_0.2mm.inst.cfg

@@ -0,0 +1,41 @@
+[general]
+definition = ultimaker_methodx
+name = Fast - Experimental
+version = 4
+
+[metadata]
+is_experimental = True
+material = ultimaker_sr30_175
+quality_type = draft
+setting_version = 22
+type = quality
+variant = 2XA
+weight = -2
+
+[values]
+brim_replaces_support = False
+cool_fan_enabled = False
+cool_min_temperature = =material_print_temperature
+raft_airgap = 0.0
+raft_interface_line_width = 0.7
+raft_interface_speed = 70
+raft_surface_speed = 90
+retract_at_layer_change = True
+retraction_amount = 0.5
+speed_prime_tower = 25.0
+speed_print = 50
+speed_roofing = 50
+speed_support = 50
+speed_support_bottom = 30
+speed_support_interface = 80
+speed_topbottom = 50
+speed_wall_0 = 50
+speed_wall_x = 50
+support_bottom_wall_count = 5
+support_fan_enable = False
+support_infill_sparse_thickness = =min(layer_height * 2, machine_nozzle_size * 3 / 4) if layer_height <= 0.15 / 0.4 * machine_nozzle_size else layer_height
+support_interface_enable = True
+support_wall_count = 1
+support_xy_distance = 0.2
+support_z_distance = 0
+

resources/quality/ultimaker_methodx/um_methodx_labs_um-asa-175_0.2mm.inst.cfg

@@ -0,0 +1,50 @@
+[general]
+definition = ultimaker_methodx
+name = Fast - Experimental
+version = 4
+
+[metadata]
+is_experimental = True
+material = ultimaker_asa_175
+quality_type = draft
+setting_version = 22
+type = quality
+variant = LABS
+weight = -2
+
+[values]
+cool_fan_enabled = False
+material_print_temperature_layer_0 = =default_material_print_temperature+5
+raft_airgap = 0.3
+raft_base_speed = 10
+retract_at_layer_change = True
+retraction_amount = 0.5
+retraction_min_travel = 3.2
+roofing_material_flow = 98.0
+small_skin_width = 3.6
+speed_prime_tower = 30.0
+speed_print = 120.0
+speed_roofing = 55
+speed_topbottom = 55
+speed_travel = 250.0
+speed_wall_0 = 45
+speed_wall_x = 65
+support_angle = 50
+support_bottom_density = 24
+support_bottom_enable = False
+support_bottom_line_width = 0.6
+support_bottom_stair_step_height = 0
+support_fan_enable = False
+support_infill_rate = 12.0
+support_interface_enable = True
+support_interface_pattern = lines
+support_line_width = 0.3
+support_pattern = lines
+support_roof_density = 97
+support_roof_height = 1.015
+support_roof_line_width = 0.25
+support_use_towers = False
+support_xy_distance = 0.2
+support_xy_distance_overhang = 0.15
+support_z_distance = 0.25
+

resources/quality/ultimaker_methodx/um_methodx_labs_um-nylon12-cf-175_0.2mm.inst.cfg

@@ -0,0 +1,53 @@
+[general]
+definition = ultimaker_methodx
+name = Fast - Experimental
+version = 4
+
+[metadata]
+is_experimental = True
+material = ultimaker_nylon12-cf_175
+quality_type = draft
+setting_version = 22
+type = quality
+variant = LABS
+weight = -2
+
+[values]
+cool_fan_enabled = False
+material_final_print_temperature = =default_material_print_temperature-5
+material_initial_print_temperature = =default_material_print_temperature-5
+raft_airgap = 0.3
+raft_base_line_spacing = 3
+raft_base_line_width = 1.2
+raft_base_speed = 10
+retract_at_layer_change = True
+retraction_amount = 0.5
+retraction_min_travel = 3.2
+roofing_material_flow = 100
+small_skin_width = 3.6
+speed_prime_tower = 30.0
+speed_print = 120.0
+speed_roofing = 55
+speed_topbottom = 55
+speed_travel = 250.0
+speed_wall_0 = 45
+speed_wall_x = 65
+support_angle = 50
+support_bottom_density = 24
+support_bottom_enable = False
+support_bottom_line_width = 0.6
+support_bottom_stair_step_height = 0
+support_fan_enable = False
+support_infill_rate = 12.0
+support_interface_enable = True
+support_interface_pattern = lines
+support_line_width = 0.3
+support_pattern = lines
+support_roof_density = 97
+support_roof_height = 1.015
+support_roof_line_width = 0.25
+support_use_towers = False
+support_xy_distance = 0.2
+support_xy_distance_overhang = 0.15
+support_z_distance = 0.25
+

resources/quality/ultimaker_methodxl/um_methodxl_1c_um-absr-175_0.2mm.inst.cfg

@@ -12,9 +12,7 @@ variant = 1C
 weight = -2
 
 [values]
-build_volume_temperature = 85
 cool_fan_enabled = False
-default_material_bed_temperature = 95
 raft_airgap = 0.3
 speed_prime_tower = 30.0
 speed_print = 120.0

resources/quality/ultimaker_methodxl/um_methodxl_1c_um-asa-175_0.2mm.inst.cfg

@@ -0,0 +1,51 @@
+[general]
+definition = ultimaker_methodxl
+name = Fast - Experimental
+version = 4
+
+[metadata]
+is_experimental = True
+material = ultimaker_asa_175
+quality_type = draft
+setting_version = 22
+type = quality
+variant = 1C
+weight = -2
+
+[values]
+cool_fan_enabled = False
+material_print_temperature_layer_0 = =default_material_print_temperature+5
+raft_airgap = 0.3
+raft_base_speed = 10
+retract_at_layer_change = True
+retraction_amount = 0.5
+retraction_min_travel = 3.2
+roofing_material_flow = 98.0
+small_skin_width = 3.6
+speed_prime_tower = 30.0
+speed_print = 120.0
+speed_roofing = 55
+speed_topbottom = 55
+speed_travel = 500
+speed_travel_layer_0 = 250
+speed_wall_0 = 45
+speed_wall_x = 65
+support_angle = 50
+support_bottom_density = 24
+support_bottom_enable = False
+support_bottom_line_width = 0.6
+support_bottom_stair_step_height = 0
+support_fan_enable = False
+support_infill_rate = 12.0
+support_interface_enable = True
+support_interface_pattern = lines
+support_line_width = 0.3
+support_pattern = lines
+support_roof_density = 97
+support_roof_height = 1.015
+support_roof_line_width = 0.25
+support_use_towers = False
+support_xy_distance = 0.2
+support_xy_distance_overhang = 0.15
+support_z_distance = 0.25
+

resources/quality/ultimaker_methodxl/um_methodxl_1c_um-nylon12-cf-175_0.2mm.inst.cfg

@@ -0,0 +1,53 @@
+[general]
+definition = ultimaker_methodxl
+name = Fast - Experimental
+version = 4
+
+[metadata]
+is_experimental = True
+material = ultimaker_nylon12-cf_175
+quality_type = draft
+setting_version = 22
+type = quality
+variant = 1C
+weight = -2
+
+[values]
+cool_fan_enabled = False
+material_final_print_temperature = =default_material_print_temperature-5
+material_initial_print_temperature = =default_material_print_temperature-5
+raft_airgap = 0.3
+raft_base_line_spacing = 3
+raft_base_line_width = 1.2
+raft_base_speed = 10
+retract_at_layer_change = True
+retraction_amount = 0.5
+retraction_min_travel = 3.2
+roofing_material_flow = 100
+small_skin_width = 3.6
+speed_prime_tower = 30.0
+speed_print = 120.0
+speed_roofing = 55
+speed_topbottom = 55
+speed_travel = 250.0
+speed_wall_0 = 45
+speed_wall_x = 65
+support_angle = 50
+support_bottom_density = 24
+support_bottom_enable = False
+support_bottom_line_width = 0.6
+support_bottom_stair_step_height = 0
+support_fan_enable = False
+support_infill_rate = 12.0
+support_interface_enable = True
+support_interface_pattern = lines
+support_line_width = 0.3
+support_pattern = lines
+support_roof_density = 97
+support_roof_height = 1.015
+support_roof_line_width = 0.25
+support_use_towers = False
+support_xy_distance = 0.2
+support_xy_distance_overhang = 0.15
+support_z_distance = 0.25
+

resources/quality/ultimaker_methodxl/um_methodxl_1xa_um-absr-175_0.2mm.inst.cfg

@@ -12,9 +12,7 @@ variant = 1XA
 weight = -2
 
 [values]
-build_volume_temperature = 85
 cool_fan_enabled = False
-default_material_bed_temperature = 95
 raft_airgap = 0.3
 speed_prime_tower = 30.0
 speed_print = 120.0

resources/quality/ultimaker_methodxl/um_methodxl_1xa_um-asa-175_0.2mm.inst.cfg

@@ -0,0 +1,51 @@
+[general]
+definition = ultimaker_methodxl
+name = Fast - Experimental
+version = 4
+
+[metadata]
+is_experimental = True
+material = ultimaker_asa_175
+quality_type = draft
+setting_version = 22
+type = quality
+variant = 1XA
+weight = -2
+
+[values]
+cool_fan_enabled = False
+material_print_temperature_layer_0 = =default_material_print_temperature+5
+raft_airgap = 0.3
+raft_base_speed = 10
+retract_at_layer_change = True
+retraction_amount = 0.5
+retraction_min_travel = 3.2
+roofing_material_flow = 98.0
+small_skin_width = 3.6
+speed_prime_tower = 30.0
+speed_print = 120.0
+speed_roofing = 55
+speed_topbottom = 55
+speed_travel = 500
+speed_travel_layer_0 = 250
+speed_wall_0 = 45
+speed_wall_x = 65
+support_angle = 50
+support_bottom_density = 24
+support_bottom_enable = False
+support_bottom_line_width = 0.6
+support_bottom_stair_step_height = 0
+support_fan_enable = False
+support_infill_rate = 12.0
+support_interface_enable = True
+support_interface_pattern = lines
+support_line_width = 0.3
+support_pattern = lines
+support_roof_density = 97
+support_roof_height = 1.015
+support_roof_line_width = 0.25
+support_use_towers = False
+support_xy_distance = 0.2
+support_xy_distance_overhang = 0.15
+support_z_distance = 0.25
+

resources/quality/ultimaker_methodxl/um_methodxl_2xa_um-sr30-175_0.2mm.inst.cfg

@@ -0,0 +1,41 @@
+[general]
+definition = ultimaker_methodxl
+name = Fast - Experimental
+version = 4
+
+[metadata]
+is_experimental = True
+material = ultimaker_sr30_175
+quality_type = draft
+setting_version = 22
+type = quality
+variant = 2XA
+weight = -2
+
+[values]
+brim_replaces_support = False
+cool_fan_enabled = False
+cool_min_temperature = =material_print_temperature
+raft_airgap = 0.0
+raft_interface_line_width = 0.7
+raft_interface_speed = 70
+raft_surface_speed = 90
+retract_at_layer_change = True
+retraction_amount = 0.5
+speed_prime_tower = 25.0
+speed_print = 50
+speed_roofing = 50
+speed_support = 50
+speed_support_bottom = 30
+speed_support_interface = 80
+speed_topbottom = 50
+speed_wall_0 = 50
+speed_wall_x = 50
+support_bottom_wall_count = 5
+support_fan_enable = False
+support_infill_sparse_thickness = =min(layer_height * 2, machine_nozzle_size * 3 / 4) if layer_height <= 0.15 / 0.4 * machine_nozzle_size else layer_height
+support_interface_enable = True
+support_wall_count = 1
+support_xy_distance = 0.2
+support_z_distance = 0
+

resources/quality/ultimaker_methodxl/um_methodxl_labs_um-absr-175_0.2mm.inst.cfg

@@ -12,9 +12,7 @@ variant = LABS
 weight = -2
 
 [values]
-build_volume_temperature = 85
 cool_fan_enabled = False
-default_material_bed_temperature = 95
 raft_airgap = 0.3
 speed_prime_tower = 30.0
 speed_print = 120.0

resources/quality/ultimaker_methodxl/um_methodxl_labs_um-asa-175_0.2mm.inst.cfg

@@ -0,0 +1,51 @@
+[general]
+definition = ultimaker_methodxl
+name = Fast - Experimental
+version = 4
+
+[metadata]
+is_experimental = True
+material = ultimaker_asa_175
+quality_type = draft
+setting_version = 22
+type = quality
+variant = LABS
+weight = -2
+
+[values]
+cool_fan_enabled = False
+material_print_temperature_layer_0 = =default_material_print_temperature+5
+raft_airgap = 0.3
+raft_base_speed = 10
+retract_at_layer_change = True
+retraction_amount = 0.5
+retraction_min_travel = 3.2
+roofing_material_flow = 98.0
+small_skin_width = 3.6
+speed_prime_tower = 30.0
+speed_print = 120.0
+speed_roofing = 55
+speed_topbottom = 55
+speed_travel = 500
+speed_travel_layer_0 = 250
+speed_wall_0 = 45
+speed_wall_x = 65
+support_angle = 50
+support_bottom_density = 24
+support_bottom_enable = False
+support_bottom_line_width = 0.6
+support_bottom_stair_step_height = 0
+support_fan_enable = False
+support_infill_rate = 12.0
+support_interface_enable = True
+support_interface_pattern = lines
+support_line_width = 0.3
+support_pattern = lines
+support_roof_density = 97
+support_roof_height = 1.015
+support_roof_line_width = 0.25
+support_use_towers = False
+support_xy_distance = 0.2
+support_xy_distance_overhang = 0.15
+support_z_distance = 0.25
+

resources/quality/ultimaker_methodxl/um_methodxl_labs_um-nylon12-cf-175_0.2mm.inst.cfg

@@ -0,0 +1,53 @@
+[general]
+definition = ultimaker_methodxl
+name = Fast - Experimental
+version = 4
+
+[metadata]
+is_experimental = True
+material = ultimaker_nylon12-cf_175
+quality_type = draft
+setting_version = 22
+type = quality
+variant = LABS
+weight = -2
+
+[values]
+cool_fan_enabled = False
+material_final_print_temperature = =default_material_print_temperature-5
+material_initial_print_temperature = =default_material_print_temperature-5
+raft_airgap = 0.3
+raft_base_line_spacing = 3
+raft_base_line_width = 1.2
+raft_base_speed = 10
+retract_at_layer_change = True
+retraction_amount = 0.5
+retraction_min_travel = 3.2
+roofing_material_flow = 100
+small_skin_width = 3.6
+speed_prime_tower = 30.0
+speed_print = 120.0
+speed_roofing = 55
+speed_topbottom = 55
+speed_travel = 250.0
+speed_wall_0 = 45
+speed_wall_x = 65
+support_angle = 50
+support_bottom_density = 24
+support_bottom_enable = False
+support_bottom_line_width = 0.6
+support_bottom_stair_step_height = 0
+support_fan_enable = False
+support_infill_rate = 12.0
+support_interface_enable = True
+support_interface_pattern = lines
+support_line_width = 0.3
+support_pattern = lines
+support_roof_density = 97
+support_roof_height = 1.015
+support_roof_line_width = 0.25
+support_use_towers = False
+support_xy_distance = 0.2
+support_xy_distance_overhang = 0.15
+support_z_distance = 0.25
+

resources/quality/ultimaker_s3/um_s3_aa0.25_nylon_0.1mm.inst.cfg

@@ -17,7 +17,6 @@ machine_nozzle_heat_up_speed = 1.4
 material_print_temperature = =default_material_print_temperature - 20
 ooze_shield_angle = 40
 raft_airgap = 0.4
-retraction_min_travel = 5
 speed_print = 70
 speed_topbottom = =math.ceil(speed_print * 30 / 70)
 speed_wall = =math.ceil(speed_print * 30 / 70)

resources/quality/ultimaker_s3/um_s3_aa0.25_pc_0.1mm.inst.cfg

@@ -25,7 +25,6 @@ prime_tower_wipe_enabled = True
 raft_airgap = 0.25
 retraction_hop = 2
 retraction_hop_only_when_collides = True
-retraction_min_travel = 0.8
 speed_print = 50
 speed_topbottom = =math.ceil(speed_print * 25 / 50)
 speed_wall = =math.ceil(speed_print * 40 / 50)

resources/quality/ultimaker_s3/um_s3_aa0.25_pp_0.1mm.inst.cfg

@@ -28,7 +28,6 @@ retraction_count_max = 15
 retraction_extra_prime_amount = 0.2
 retraction_hop = 2
 retraction_hop_only_when_collides = True
-retraction_min_travel = 0.8
 retraction_prime_speed = 15
 speed_print = 25
 speed_wall = =math.ceil(speed_print * 25 / 25)

resources/quality/ultimaker_s3/um_s3_aa0.25_um-abs_0.1mm.inst.cfg

@@ -65,7 +65,7 @@ support_bottom_distance = =support_z_distance
 support_interface_enable = True
 support_structure = tree
 support_top_distance = =support_z_distance
-support_z_distance = =math.ceil(0.3/layer_height)*layer_height
+support_z_distance = 0.3
 top_bottom_thickness = =max(1.2 , layer_height * 6)
 wall_0_wipe_dist = 0.8
 z_seam_relative = True

resources/quality/ultimaker_s3/um_s3_aa0.25_um-petg_0.1mm.inst.cfg

@@ -63,7 +63,7 @@ support_bottom_distance = =support_z_distance
 support_interface_enable = True
 support_structure = tree
 support_top_distance = =support_z_distance
-support_z_distance = =math.ceil(0.3/layer_height)*layer_height
+support_z_distance = 0.3
 top_bottom_thickness = =max(1.2 , layer_height * 6)
 wall_0_wipe_dist = 0.8
 z_seam_relative = True

resources/quality/ultimaker_s3/um_s3_aa0.25_um-pla_0.1mm.inst.cfg

@@ -64,7 +64,7 @@ support_bottom_distance = =support_z_distance
 support_interface_enable = True
 support_structure = tree
 support_top_distance = =support_z_distance
-support_z_distance = =math.ceil(0.3/layer_height)*layer_height
+support_z_distance = 0.3
 top_bottom_thickness = =max(1 , layer_height * 5)
 wall_0_wipe_dist = 0.8
 z_seam_relative = True

resources/quality/ultimaker_s3/um_s3_aa0.25_um-tough-pla_0.1mm.inst.cfg

@@ -64,7 +64,7 @@ support_bottom_distance = =support_z_distance
 support_interface_enable = True
 support_structure = tree
 support_top_distance = =support_z_distance
-support_z_distance = =math.ceil(0.3/layer_height)*layer_height
+support_z_distance = 0.3
 top_bottom_thickness = =max(1 , layer_height * 5)
 wall_0_wipe_dist = 0.8
 z_seam_relative = True

resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.06mm.inst.cfg

@@ -26,7 +26,6 @@ prime_tower_wipe_enabled = True
 raft_airgap = 0.25
 retraction_hop = 2
 retraction_hop_only_when_collides = True
-retraction_min_travel = 0.8
 speed_print = 50
 speed_topbottom = =math.ceil(speed_print * 25 / 50)
 speed_wall = =math.ceil(speed_print * 40 / 50)

resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.15mm.inst.cfg

@@ -25,7 +25,6 @@ prime_tower_wipe_enabled = True
 raft_airgap = 0.25
 retraction_hop = 2
 retraction_hop_only_when_collides = True
-retraction_min_travel = 0.8
 speed_print = 50
 speed_topbottom = =math.ceil(speed_print * 25 / 50)
 speed_wall = =math.ceil(speed_print * 40 / 50)

resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.1mm.inst.cfg

@@ -26,7 +26,6 @@ prime_tower_wipe_enabled = True
 raft_airgap = 0.25
 retraction_hop = 2
 retraction_hop_only_when_collides = True
-retraction_min_travel = 0.8
 speed_print = 50
 speed_topbottom = =math.ceil(speed_print * 25 / 50)
 speed_wall = =math.ceil(speed_print * 40 / 50)

resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.2mm.inst.cfg

@@ -25,7 +25,6 @@ prime_tower_wipe_enabled = True
 raft_airgap = 0.25
 retraction_hop = 2
 retraction_hop_only_when_collides = True
-retraction_min_travel = 0.8
 speed_print = 50
 speed_topbottom = =math.ceil(speed_print * 25 / 50)
 speed_wall = =math.ceil(speed_print * 40 / 50)

resources/quality/ultimaker_s3/um_s3_aa0.4_pp_0.15mm.inst.cfg

@@ -28,7 +28,6 @@ retraction_count_max = 15
 retraction_extra_prime_amount = 0.8
 retraction_hop = 2
 retraction_hop_only_when_collides = True
-retraction_min_travel = 0.8
 speed_print = 25
 speed_topbottom = =math.ceil(speed_print * 25 / 25)
 speed_wall = =math.ceil(speed_print * 25 / 25)

resources/quality/ultimaker_s3/um_s3_aa0.4_pp_0.1mm.inst.cfg

@@ -29,7 +29,6 @@ retraction_count_max = 15
 retraction_extra_prime_amount = 0.8
 retraction_hop = 2
 retraction_hop_only_when_collides = True
-retraction_min_travel = 0.8
 speed_print = 25
 speed_topbottom = =math.ceil(speed_print * 25 / 25)
 speed_wall = =math.ceil(speed_print * 25 / 25)

resources/quality/ultimaker_s3/um_s3_aa0.4_pp_0.2mm.inst.cfg

@@ -29,7 +29,6 @@ retraction_count_max = 15
 retraction_extra_prime_amount = 0.8
 retraction_hop = 2
 retraction_hop_only_when_collides = True
-retraction_min_travel = 0.8
 speed_print = 25
 speed_topbottom = =math.ceil(speed_print * 25 / 25)
 speed_wall = =math.ceil(speed_print * 25 / 25)

resources/quality/ultimaker_s3/um_s3_aa0.4_tpu_0.15mm.inst.cfg

@@ -12,6 +12,11 @@ variant = AA 0.4
 weight = -1
 
 [values]
+bridge_skin_material_flow = 200
+bridge_skin_speed = =bridge_wall_speed
+bridge_sparse_infill_max_density = 50
+bridge_wall_material_flow = =bridge_skin_material_flow
+bridge_wall_speed = 10
 brim_width = 8.75
 gradual_infill_step_height = =5 * layer_height
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d'
@@ -28,7 +33,6 @@ prime_tower_wipe_enabled = True
 retraction_count_max = 15
 retraction_extra_prime_amount = 0.8
 retraction_hop_only_when_collides = True
-retraction_min_travel = =line_width * 2
 skin_line_width = =round(line_width / 0.8, 2)
 speed_print = 25
 speed_topbottom = =math.ceil(speed_print * 0.8)
@@ -42,7 +46,7 @@ support_z_distance = =math.ceil(0.3/layer_height)*layer_height
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 35
-top_bottom_thickness = 0.7
+top_bottom_thickness = =layer_height * 6
 travel_avoid_distance = 1.5
 wall_0_inset = 0
 

resources/quality/ultimaker_s3/um_s3_aa0.4_tpu_0.1mm.inst.cfg

@@ -12,6 +12,11 @@ variant = AA 0.4
 weight = 0
 
 [values]
+bridge_skin_material_flow = 200
+bridge_skin_speed = =bridge_wall_speed
+bridge_sparse_infill_max_density = 50
+bridge_wall_material_flow = =bridge_skin_material_flow
+bridge_wall_speed = 10
 brim_width = 8.75
 gradual_infill_step_height = =5 * layer_height
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d'
@@ -29,7 +34,6 @@ prime_tower_wipe_enabled = True
 retraction_count_max = 15
 retraction_extra_prime_amount = 0.8
 retraction_hop_only_when_collides = True
-retraction_min_travel = =line_width * 2
 skin_line_width = =round(line_width / 0.8, 2)
 speed_print = 25
 speed_topbottom = =math.ceil(speed_print * 0.8)
@@ -43,7 +47,7 @@ support_z_distance = =math.ceil(0.3/layer_height)*layer_height
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 35
-top_bottom_thickness = 0.7
+top_bottom_thickness = =layer_height * 6
 travel_avoid_distance = 1.5
 wall_0_inset = 0
 

resources/quality/ultimaker_s3/um_s3_aa0.4_tpu_0.2mm.inst.cfg

@@ -12,6 +12,11 @@ variant = AA 0.4
 weight = -2
 
 [values]
+bridge_skin_material_flow = 200
+bridge_skin_speed = =bridge_wall_speed
+bridge_sparse_infill_max_density = 50
+bridge_wall_material_flow = =bridge_skin_material_flow
+bridge_wall_speed = 10
 brim_width = 8.75
 gradual_infill_step_height = =5 * layer_height
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d'
@@ -28,7 +33,6 @@ prime_tower_wipe_enabled = True
 retraction_count_max = 15
 retraction_extra_prime_amount = 0.8
 retraction_hop_only_when_collides = True
-retraction_min_travel = =line_width * 2
 skin_line_width = =round(line_width / 0.8, 2)
 speed_print = 25
 speed_topbottom = =math.ceil(speed_print * 0.8)
@@ -42,7 +46,7 @@ support_z_distance = =math.ceil(0.3/layer_height)*layer_height
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 35
-top_bottom_thickness = 0.7
+top_bottom_thickness = =layer_height * 6
 travel_avoid_distance = 1.5
 wall_0_inset = 0
 

resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.06mm.inst.cfg

@@ -65,7 +65,7 @@ support_bottom_distance = =support_z_distance
 support_interface_enable = True
 support_structure = tree
 support_top_distance = =support_z_distance
-support_z_distance = =math.ceil(0.3/layer_height)*layer_height
+support_z_distance = 0.3
 top_bottom_thickness = =max(1.2 , layer_height * 6)
 wall_0_wipe_dist = 0.8
 z_seam_relative = True

resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.15mm.inst.cfg

@@ -66,7 +66,7 @@ support_bottom_distance = =support_z_distance
 support_interface_enable = True
 support_structure = tree
 support_top_distance = =support_z_distance
-support_z_distance = =math.ceil(0.3/layer_height)*layer_height
+support_z_distance = 0.3
 top_bottom_thickness = =max(1.2 , layer_height * 6)
 wall_0_wipe_dist = 0.8
 z_seam_relative = True

resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.1mm.inst.cfg

@@ -65,7 +65,7 @@ support_bottom_distance = =support_z_distance
 support_interface_enable = True
 support_structure = tree
 support_top_distance = =support_z_distance
-support_z_distance = =math.ceil(0.3/layer_height)*layer_height
+support_z_distance = 0.3
 top_bottom_thickness = =max(1.2 , layer_height * 6)
 wall_0_wipe_dist = 0.8
 z_seam_relative = True

resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.2mm.inst.cfg

@@ -28,6 +28,7 @@ bridge_skin_speed = =bridge_wall_speed
 bridge_sparse_infill_max_density = 50
 bridge_wall_speed = 30
 cool_min_layer_time = 4
+infill_material_flow = =1.05 * material_flow
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
 infill_sparse_density = 15
 jerk_infill = =jerk_print
@@ -49,6 +50,7 @@ raft_airgap = 0.15
 retraction_amount = 6.5
 retraction_prime_speed = 15
 retraction_speed = 45
+skin_material_flow = =material_flow
 small_skin_on_surface = False
 small_skin_width = 4
 speed_infill = =speed_print
@@ -67,9 +69,11 @@ support_bottom_distance = =support_z_distance
 support_interface_enable = True
 support_structure = tree
 support_top_distance = =support_z_distance
-support_z_distance = =math.ceil(0.3/layer_height)*layer_height
+support_z_distance = 0.3
 top_bottom_thickness = =max(1.2 , layer_height * 6)
 wall_0_wipe_dist = 0.8
+wall_x_material_flow = =1.05 * wall_material_flow
+wall_x_material_flow_roofing = =wall_material_flow
 z_seam_relative = True
 z_seam_type = back
 zig_zaggify_infill = True

resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.3mm.inst.cfg

@@ -67,7 +67,7 @@ support_bottom_distance = =support_z_distance
 support_interface_enable = True
 support_structure = tree
 support_top_distance = =support_z_distance
-support_z_distance = =math.ceil(0.3/layer_height)*layer_height
+support_z_distance = 0.4
 top_bottom_thickness = =max(1.2 , layer_height * 6)
 wall_0_wipe_dist = 0.8
 wall_line_width_0 = =line_width * (1 + magic_spiralize * 0.25)

resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.06mm.inst.cfg

@@ -64,7 +64,7 @@ support_bottom_distance = =support_z_distance
 support_interface_enable = True
 support_structure = tree
 support_top_distance = =support_z_distance
-support_z_distance = =math.ceil(0.3/layer_height)*layer_height
+support_z_distance = 0.3
 top_bottom_thickness = =max(1.2 , layer_height * 6)
 wall_0_wipe_dist = 0.8
 z_seam_relative = True

resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.15mm.inst.cfg

@@ -65,7 +65,7 @@ support_bottom_distance = =support_z_distance
 support_interface_enable = True
 support_structure = tree
 support_top_distance = =support_z_distance
-support_z_distance = =math.ceil(0.3/layer_height)*layer_height
+support_z_distance = 0.3
 top_bottom_thickness = =max(1.2 , layer_height * 6)
 wall_0_wipe_dist = 0.8
 z_seam_relative = True

resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.1mm.inst.cfg

@@ -64,7 +64,7 @@ support_bottom_distance = =support_z_distance
 support_interface_enable = True
 support_structure = tree
 support_top_distance = =support_z_distance
-support_z_distance = =math.ceil(0.3/layer_height)*layer_height
+support_z_distance = 0.3
 top_bottom_thickness = =max(1.2 , layer_height * 6)
 wall_0_wipe_dist = 0.8
 z_seam_relative = True

resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.2mm.inst.cfg

@@ -28,6 +28,7 @@ bridge_skin_speed = =bridge_wall_speed
 bridge_sparse_infill_max_density = 50
 bridge_wall_speed = 30
 cool_min_layer_time = 4
+infill_material_flow = =1.1 * material_flow
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
 infill_sparse_density = 15
 jerk_infill = =jerk_print
@@ -48,6 +49,7 @@ prime_tower_enable = False
 retraction_amount = 8
 retraction_prime_speed = 15
 retraction_speed = 45
+skin_material_flow = =1.05 * material_flow
 small_skin_on_surface = False
 small_skin_width = 4
 speed_infill = =speed_print
@@ -66,9 +68,11 @@ support_bottom_distance = =support_z_distance
 support_interface_enable = True
 support_structure = tree
 support_top_distance = =support_z_distance
-support_z_distance = =math.ceil(0.3/layer_height)*layer_height
+support_z_distance = 0.3
 top_bottom_thickness = =max(1.2 , layer_height * 6)
 wall_0_wipe_dist = 0.8
+wall_x_material_flow = =1.1 * wall_material_flow
+wall_x_material_flow_roofing = =wall_material_flow
 z_seam_relative = True
 z_seam_type = back
 zig_zaggify_infill = True

resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.3mm.inst.cfg

@@ -66,7 +66,7 @@ support_bottom_distance = =support_z_distance
 support_interface_enable = True
 support_structure = tree
 support_top_distance = =support_z_distance
-support_z_distance = =math.ceil(0.3/layer_height)*layer_height
+support_z_distance = 0.4
 top_bottom_thickness = =max(1.2 , layer_height * 6)
 wall_0_wipe_dist = 0.8
 wall_line_width_0 = =line_width * (1 + magic_spiralize * 0.25)

resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.06mm.inst.cfg

@@ -65,7 +65,7 @@ support_bottom_distance = =support_z_distance
 support_interface_enable = True
 support_structure = tree
 support_top_distance = =support_z_distance
-support_z_distance = =math.ceil(0.3/layer_height)*layer_height
+support_z_distance = 0.3
 top_bottom_thickness = =max(1 , layer_height * 5)
 wall_0_wipe_dist = 0.8
 z_seam_relative = True

resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.15mm.inst.cfg

@@ -66,7 +66,7 @@ support_bottom_distance = =support_z_distance
 support_interface_enable = True
 support_structure = tree
 support_top_distance = =support_z_distance
-support_z_distance = =math.ceil(0.3/layer_height)*layer_height
+support_z_distance = 0.3
 top_bottom_thickness = =max(1 , layer_height * 5)
 wall_0_wipe_dist = 0.8
 z_seam_relative = True

resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.1mm.inst.cfg

@@ -65,7 +65,7 @@ support_bottom_distance = =support_z_distance
 support_interface_enable = True
 support_structure = tree
 support_top_distance = =support_z_distance
-support_z_distance = =math.ceil(0.3/layer_height)*layer_height
+support_z_distance = 0.3
 top_bottom_thickness = =max(1 , layer_height * 5)
 wall_0_wipe_dist = 0.8
 z_seam_relative = True

resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.2mm.inst.cfg

@@ -28,6 +28,7 @@ bridge_skin_speed = =bridge_wall_speed
 bridge_sparse_infill_max_density = 50
 bridge_wall_speed = 30
 cool_min_layer_time = 6
+infill_material_flow = =1.1 * material_flow
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
 infill_sparse_density = 15
 jerk_infill = =jerk_print
@@ -49,6 +50,7 @@ raft_airgap = 0.25
 retraction_amount = 6.5
 retraction_prime_speed = =retraction_speed
 retraction_speed = 45
+skin_material_flow = =1.05 * material_flow
 small_skin_on_surface = False
 small_skin_width = 4
 speed_infill = =speed_print
@@ -67,9 +69,11 @@ support_bottom_distance = =support_z_distance
 support_interface_enable = True
 support_structure = tree
 support_top_distance = =support_z_distance
-support_z_distance = =math.ceil(0.3/layer_height)*layer_height
+support_z_distance = 0.3
 top_bottom_thickness = =max(1 , layer_height * 5)
 wall_0_wipe_dist = 0.8
+wall_x_material_flow = =1.1 * wall_material_flow
+wall_x_material_flow_roofing = =wall_material_flow
 z_seam_relative = True
 z_seam_type = back
 zig_zaggify_infill = True

resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.3mm.inst.cfg

@@ -67,7 +67,7 @@ support_bottom_distance = =support_z_distance
 support_interface_enable = True
 support_structure = tree
 support_top_distance = =support_z_distance
-support_z_distance = =math.ceil(0.3/layer_height)*layer_height
+support_z_distance = 0.3
 top_bottom_thickness = =max(1 , layer_height * 5)
 wall_0_wipe_dist = 0.8
 wall_line_width_0 = =line_width * (1 + magic_spiralize * 0.25)

resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.06mm.inst.cfg

@@ -65,7 +65,7 @@ support_bottom_distance = =support_z_distance
 support_interface_enable = True
 support_structure = tree
 support_top_distance = =support_z_distance
-support_z_distance = =math.ceil(0.3/layer_height)*layer_height
+support_z_distance = 0.3
 top_bottom_thickness = =max(1 , layer_height * 5)
 wall_0_wipe_dist = 0.8
 z_seam_relative = True

resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.15mm.inst.cfg

@@ -66,7 +66,7 @@ support_bottom_distance = =support_z_distance
 support_interface_enable = True
 support_structure = tree
 support_top_distance = =support_z_distance
-support_z_distance = =math.ceil(0.3/layer_height)*layer_height
+support_z_distance = 0.35
 top_bottom_thickness = =max(1 , layer_height * 5)
 wall_0_wipe_dist = 0.8
 z_seam_relative = True

resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.1mm.inst.cfg

@@ -65,7 +65,7 @@ support_bottom_distance = =support_z_distance
 support_interface_enable = True
 support_structure = tree
 support_top_distance = =support_z_distance
-support_z_distance = =math.ceil(0.3/layer_height)*layer_height
+support_z_distance = 0.3
 top_bottom_thickness = =max(1 , layer_height * 5)
 wall_0_wipe_dist = 0.8
 z_seam_relative = True

resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.2mm.inst.cfg

@@ -28,6 +28,7 @@ bridge_skin_speed = =bridge_wall_speed
 bridge_sparse_infill_max_density = 50
 bridge_wall_speed = 30
 cool_min_layer_time = 6
+infill_material_flow = =1.1 * material_flow
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
 infill_sparse_density = 15
 jerk_infill = =jerk_print
@@ -48,6 +49,7 @@ raft_airgap = 0.25
 retraction_amount = 6.5
 retraction_prime_speed = =retraction_speed
 retraction_speed = 45
+skin_material_flow = =1.05 * material_flow
 small_skin_on_surface = False
 small_skin_width = 4
 speed_infill = =speed_print
@@ -66,9 +68,11 @@ support_bottom_distance = =support_z_distance
 support_interface_enable = True
 support_structure = tree
 support_top_distance = =support_z_distance
-support_z_distance = =math.ceil(0.3/layer_height)*layer_height
+support_z_distance = 0.35
 top_bottom_thickness = =max(1 , layer_height * 5)
 wall_0_wipe_dist = 0.8
+wall_x_material_flow = =1.1 * wall_material_flow
+wall_x_material_flow_roofing = =wall_material_flow
 z_seam_relative = True
 z_seam_type = back
 zig_zaggify_infill = True

resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.3mm.inst.cfg

@@ -67,7 +67,7 @@ support_bottom_distance = =support_z_distance
 support_interface_enable = True
 support_structure = tree
 support_top_distance = =support_z_distance
-support_z_distance = =math.ceil(0.3/layer_height)*layer_height
+support_z_distance = 0.4
 top_bottom_thickness = =max(1 , layer_height * 5)
 wall_0_wipe_dist = 0.8
 wall_line_width_0 = =line_width * (1 + magic_spiralize * 0.25)

resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.2mm.inst.cfg

@@ -24,7 +24,6 @@ prime_tower_min_volume = 10
 retraction_count_max = 15
 retraction_extra_prime_amount = 0.5
 retraction_hop = 0.5
-retraction_min_travel = 1.5
 retraction_prime_speed = 15
 speed_wall_x = =math.ceil(speed_wall * 30 / 30)
 switch_extruder_prime_speed = 15

resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.3mm.inst.cfg

@@ -24,7 +24,6 @@ prime_tower_min_volume = 15
 retraction_count_max = 15
 retraction_extra_prime_amount = 0.5
 retraction_hop = 0.5
-retraction_min_travel = 1.5
 retraction_prime_speed = 15
 speed_wall_x = =math.ceil(speed_wall * 30 / 30)
 switch_extruder_prime_speed = 15

resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.4mm.inst.cfg

@@ -24,7 +24,6 @@ prime_tower_min_volume = 20
 retraction_count_max = 15
 retraction_extra_prime_amount = 0.5
 retraction_hop = 0.5
-retraction_min_travel = 1.5
 retraction_prime_speed = 15
 speed_infill = =math.ceil(speed_wall * 30 / 30)
 speed_wall_x = =math.ceil(speed_wall * 30 / 30)

resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.2mm.inst.cfg

@@ -12,6 +12,11 @@ variant = AA 0.8
 weight = -2
 
 [values]
+bridge_skin_material_flow = 200
+bridge_skin_speed = =bridge_wall_speed
+bridge_sparse_infill_max_density = 50
+bridge_wall_material_flow = =bridge_skin_material_flow
+bridge_wall_speed = 10
 brim_width = 8.75
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d'
 machine_nozzle_cool_down_speed = 0.5
@@ -27,7 +32,6 @@ retraction_count_max = 15
 retraction_extra_prime_amount = 0.5
 retraction_hop = 1.5
 retraction_hop_only_when_collides = False
-retraction_min_travel = =line_width * 2
 retraction_prime_speed = 15
 speed_print = 30
 speed_topbottom = =math.ceil(speed_print * 25 / 30)
@@ -37,7 +41,7 @@ support_angle = 50
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 45
-top_bottom_thickness = 1.2
+top_bottom_thickness = =layer_height * 6
 top_skin_expand_distance = =line_width * 2
 travel_avoid_distance = 1.5
 wall_0_wipe_dist = =line_width * 2

resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.3mm.inst.cfg

@@ -12,6 +12,11 @@ variant = AA 0.8
 weight = -3
 
 [values]
+bridge_skin_material_flow = 200
+bridge_skin_speed = =bridge_wall_speed
+bridge_sparse_infill_max_density = 50
+bridge_wall_material_flow = =bridge_skin_material_flow
+bridge_wall_speed = 10
 brim_width = 8.75
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d'
 infill_sparse_density = 15
@@ -28,7 +33,6 @@ retraction_count_max = 15
 retraction_extra_prime_amount = 0.5
 retraction_hop = 1.5
 retraction_hop_only_when_collides = False
-retraction_min_travel = =line_width * 2
 retraction_prime_speed = 15
 speed_print = 30
 speed_topbottom = =math.ceil(speed_print * 23 / 30)
@@ -38,7 +42,7 @@ support_angle = 50
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 45
-top_bottom_thickness = 1.2
+top_bottom_thickness = =layer_height * 6
 top_skin_expand_distance = =line_width * 2
 travel_avoid_distance = 1.5
 wall_0_wipe_dist = =line_width * 2

resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.4mm.inst.cfg

@@ -12,6 +12,11 @@ variant = AA 0.8
 weight = -4
 
 [values]
+bridge_skin_material_flow = 200
+bridge_skin_speed = =bridge_wall_speed
+bridge_sparse_infill_max_density = 50
+bridge_wall_material_flow = =bridge_skin_material_flow
+bridge_wall_speed = 10
 brim_width = 8.75
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d'
 infill_sparse_density = 15
@@ -27,7 +32,6 @@ retraction_count_max = 15
 retraction_extra_prime_amount = 0.5
 retraction_hop = 1.5
 retraction_hop_only_when_collides = False
-retraction_min_travel = =line_width * 2
 retraction_prime_speed = 15
 speed_infill = =speed_print
 speed_print = 30
@@ -38,7 +42,7 @@ support_angle = 50
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 45
-top_bottom_thickness = 1.2
+top_bottom_thickness = =layer_height * 6
 top_skin_expand_distance = =line_width * 2
 travel_avoid_distance = 1.5
 wall_0_wipe_dist = =line_width * 2

resources/quality/ultimaker_s5/um_s5_aa0.25_nylon_0.1mm.inst.cfg

@@ -17,7 +17,6 @@ machine_nozzle_heat_up_speed = 1.4
 material_print_temperature = =default_material_print_temperature - 20
 ooze_shield_angle = 40
 raft_airgap = 0.4
-retraction_min_travel = 5
 speed_print = 70
 speed_topbottom = =math.ceil(speed_print * 30 / 70)
 speed_wall = =math.ceil(speed_print * 30 / 70)

resources/quality/ultimaker_s5/um_s5_aa0.25_pc_0.1mm.inst.cfg

@@ -25,7 +25,6 @@ prime_tower_wipe_enabled = True
 raft_airgap = 0.25
 retraction_hop = 2
 retraction_hop_only_when_collides = True
-retraction_min_travel = 0.8
 speed_print = 50
 speed_topbottom = =math.ceil(speed_print * 25 / 50)
 speed_wall = =math.ceil(speed_print * 40 / 50)

resources/quality/ultimaker_s5/um_s5_aa0.25_pp_0.1mm.inst.cfg

@@ -28,7 +28,6 @@ retraction_count_max = 15
 retraction_extra_prime_amount = 0.2
 retraction_hop = 2
 retraction_hop_only_when_collides = True
-retraction_min_travel = 0.8
 retraction_prime_speed = 15
 speed_print = 25
 speed_wall = =math.ceil(speed_print * 25 / 25)

resources/quality/ultimaker_s5/um_s5_aa0.25_um-abs_0.1mm.inst.cfg

@@ -65,7 +65,7 @@ support_bottom_distance = =support_z_distance
 support_interface_enable = True
 support_structure = tree
 support_top_distance = =support_z_distance
-support_z_distance = =math.ceil(0.3/layer_height)*layer_height
+support_z_distance = 0.3
 top_bottom_thickness = =max(1.2 , layer_height * 6)
 wall_0_wipe_dist = 0.8
 z_seam_relative = True

resources/quality/ultimaker_s5/um_s5_aa0.25_um-petg_0.1mm.inst.cfg

@@ -63,7 +63,7 @@ support_bottom_distance = =support_z_distance
 support_interface_enable = True
 support_structure = tree
 support_top_distance = =support_z_distance
-support_z_distance = =math.ceil(0.3/layer_height)*layer_height
+support_z_distance = 0.3
 top_bottom_thickness = =max(1.2 , layer_height * 6)
 wall_0_wipe_dist = 0.8
 z_seam_relative = True

resources/quality/ultimaker_s5/um_s5_aa0.25_um-pla_0.1mm.inst.cfg

@@ -64,7 +64,7 @@ support_bottom_distance = =support_z_distance
 support_interface_enable = True
 support_structure = tree
 support_top_distance = =support_z_distance
-support_z_distance = =math.ceil(0.3/layer_height)*layer_height
+support_z_distance = 0.3
 top_bottom_thickness = =max(1 , layer_height * 5)
 wall_0_wipe_dist = 0.8
 z_seam_relative = True

resources/quality/ultimaker_s5/um_s5_aa0.25_um-tough-pla_0.1mm.inst.cfg

@@ -64,7 +64,7 @@ support_bottom_distance = =support_z_distance
 support_interface_enable = True
 support_structure = tree
 support_top_distance = =support_z_distance
-support_z_distance = =math.ceil(0.3/layer_height)*layer_height
+support_z_distance = 0.3
 top_bottom_thickness = =max(1 , layer_height * 5)
 wall_0_wipe_dist = 0.8
 z_seam_relative = True

resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.06mm.inst.cfg

@@ -26,7 +26,6 @@ prime_tower_wipe_enabled = True
 raft_airgap = 0.25
 retraction_hop = 2
 retraction_hop_only_when_collides = True
-retraction_min_travel = 0.8
 speed_print = 50
 speed_topbottom = =math.ceil(speed_print * 25 / 50)
 speed_wall = =math.ceil(speed_print * 40 / 50)