mirror of
https://github.com/Ultimaker/Cura.git
synced 2025-08-08 14:34:01 -06:00
Merge branch 'Ultimaker:main' into main
This commit is contained in:
Mehmet Sutaş
GitHub
commit
c04b96d721
615 changed files with 194860 additions and 220568 deletions
|
|
@ -29,7 +29,7 @@
|
|||
"machine_center_is_zero": { "default_value": false },
|
||||
"gantry_height": { "value": "0" },
|
||||
"machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
|
||||
"machine_start_gcode": { "default_value": ";Profil Homepage: https://github.com/NilsRo/Cura_Anycubic_MegaS_Profile\n\n;Slicer Information - (Support for OctoPrint Slicer Estimator)\n;Slicer info:material_guid;{material_guid}\n;Slicer info:material_id;{material_id}\n;Slicer info:material_brand;{material_brand}\n;Slicer info:material_name;{material_name}\n;Slicer info:filament_cost;{filament_cost}\n;Slicer info:material_bed_temperature;{material_bed_temperature}\n;Slicer info:material_bed_temperature_layer_0;{material_bed_temperature_layer_0}\n;Slicer info:material_print_temperature;{material_print_temperature}\n;Slicer info:material_print_temperature_layer_0;{material_print_temperature_layer_0}\n;Slicer info:material_flow;{material_flow}\n;Slicer info:layer_height;{layer_height}\n;Slicer info:machine_nozzle_size;{machine_nozzle_size}\n;Slicer info:wall_thickness;{wall_thickness}\n;Slicer info:speed_print;{speed_print}\n;Slicer info:speed_topbottom;{speed_topbottom}\n;Slicer info:travel_speed;{travel_speed}\n;Slicer info:support;{support}\n;Slicer info:retraction_speed;{retraction_speed}\n;Slicer info:retraction_amount;{retraction_amount}\n;Slicer info:layer_height;{layer_height}\n;Slicer info:infill_pattern;{infill_pattern}\n;Slicer info:infill_sparse_density;{infill_sparse_density}\n;Slicer info:cool_fan_enabled;{cool_fan_enabled}\n;Slicer info:cool_fan_speed;{cool_fan_speed}\n;Slicer info:sliced_at;{day} {date} {time}\nG21 ; metric values \nG90 ; absolute positioning \nM82 ; set extruder to absolute mode \nM107 ; start with the fan off \nM140 S{material_bed_temperature_layer_0} ; Start heating the bed \nG4 S60 ; wait 1 minute \nM104 S{material_print_temperature_layer_0} ; start heating the hot end \nM190 S{material_bed_temperature_layer_0} ; wait for bed \nM109 S{material_print_temperature_layer_0} ; wait for hotend \nM300 S1000 P500 ; BEEP heating done \nG28 X0 Y10 Z0 ; move X/Y to min endstops \nM420 S1 ; Enable leveling \nM420 Z2.0 ; Set leveling fading height to 2 mm \nG0 Z0.15 ; lift nozzle a bit \nG92 E0 ; zero the extruded length \nG1 X50 E20 F500 ; Extrude 20mm of filament in a 5cm line. \nG92 E0 ; zero the extruded length again \nG1 E-2 F500 ; Retract a little \nG1 X50 F500 ; wipe away from the filament line\nG1 X100 F9000 ; Quickly wipe away from the filament line" },
|
||||
"machine_start_gcode": { "default_value": ";Profil Homepage: https://github.com/NilsRo/Cura_Anycubic_MegaS_Profile\n\n;Slicer Information - (Support for OctoPrint Slicer Estimator)\n;Slicer info:material_guid;{material_guid}\n;Slicer info:material_id;{material_id}\n;Slicer info:material_brand;{material_brand}\n;Slicer info:material_name;{material_name}\n;Slicer info:filament_cost;{filament_cost}\n;Slicer info:material_bed_temperature;{material_bed_temperature}\n;Slicer info:material_bed_temperature_layer_0;{material_bed_temperature_layer_0}\n;Slicer info:material_print_temperature;{material_print_temperature}\n;Slicer info:material_print_temperature_layer_0;{material_print_temperature_layer_0}\n;Slicer info:material_flow;{material_flow}\n;Slicer info:layer_height;{layer_height}\n;Slicer info:machine_nozzle_size;{machine_nozzle_size}\n;Slicer info:wall_thickness;{wall_thickness}\n;Slicer info:speed_print;{speed_print}\n;Slicer info:speed_topbottom;{speed_topbottom}\n;Slicer info:travel_speed;{travel_speed}\n;Slicer info:support;{support}\n;Slicer info:retraction_speed;{retraction_speed}\n;Slicer info:retraction_amount;{retraction_amount}\n;Slicer info:layer_height;{layer_height}\n;Slicer info:infill_pattern;{infill_pattern}\n;Slicer info:infill_sparse_density;{infill_sparse_density}\n;Slicer info:cool_fan_enabled;{cool_fan_enabled}\n;Slicer info:cool_fan_speed;{cool_fan_speed}\n;Slicer info:sliced_at;{day} {date} {time}\nG21 ; metric values \nG90 ; absolute positioning \nM82 ; set extruder to absolute mode \nM900 K0 ; disable lin. adv. if not set in GCODE\nM107 ; start with the fan off \nM140 S{material_bed_temperature_layer_0} ; Start heating the bed \nG4 S60 ; wait 1 minute \nM104 S{material_print_temperature_layer_0} ; start heating the hot end \nM190 S{material_bed_temperature_layer_0} ; wait for bed \nM109 S{material_print_temperature_layer_0} ; wait for hotend \nM300 S1000 P500 ; BEEP heating done \nG28 X0 Y10 Z0 ; move X/Y to min endstops \nM420 S1 ; Enable leveling \nM420 Z2.0 ; Set leveling fading height to 2 mm \nG0 Z0.15 ; lift nozzle a bit \nG92 E0 ; zero the extruded length \nG1 X50 E20 F500 ; Extrude 20mm of filament in a 5cm line. \nG92 E0 ; zero the extruded length again \nG1 E-2 F500 ; Retract a little \nG1 X50 F500 ; wipe away from the filament line\nG1 X100 F9000 ; Quickly wipe away from the filament line" },
|
||||
"machine_end_gcode": { "default_value": "M104 S0 ; Extruder off \nM140 S0 ; Heatbed off \nM107 ; Fan off \nG91 ; relative positioning \nG1 E-5 F300 ; retract a little \nG1 Z+10 E-5 ; X-20 Y-20 F{travel_xy_speed} ; lift print head \nG28 X0 Y0 ; homing \nG1 Y180 F2000 ; reset feedrate \nM84 ; disable stepper motors \nG90 ; absolute positioning \nM300 S440 P200 ; Make Print Completed Tones \nM300 S660 P250 ; beep \nM300 S880 P300 ; beep" },
|
||||
|
||||
"machine_max_acceleration_x": { "value": 3000 },
|
||||
|
|
|
|||
27
resources/definitions/dxu_umo.def.json
Normal file
27
resources/definitions/dxu_umo.def.json
Normal file
|
|
@ -0,0 +1,27 @@
|
|||
{
|
||||
"version": 2,
|
||||
"name": "UMO+ DXU",
|
||||
"inherits": "dxu",
|
||||
"overrides": {
|
||||
"machine_disallowed_areas": {
|
||||
"default_value": [
|
||||
[[100, -102.5], [ 110, -102.5], [ 110, -62.5], [100, -62.5]]
|
||||
]
|
||||
},
|
||||
"machine_width": { "default_value": 220 },
|
||||
"machine_depth": { "default_value": 205 },
|
||||
"machine_height": { "default_value": 200 },
|
||||
"machine_nozzle_heat_up_speed": {
|
||||
"default_value": 1.95
|
||||
},
|
||||
"machine_nozzle_cool_down_speed": {
|
||||
"default_value": 0.8
|
||||
},
|
||||
"machine_start_gcode" : {
|
||||
"value": "\"\" if machine_gcode_flavor == \"UltiGCode\" else \"; Script based on an original created by tjjfvi (https://github.com/tjjfvi)\\n; An up-to-date version of the tjjfvi's original script can be found\\n; here: https://csi.t6.fyi/\\n; Note - This script will only work in Cura V4.2 and above!\\n; --- Global Settings\\n; layer_height = {layer_height}\\n; smooth_spiralized_contours = {smooth_spiralized_contours}\\n; magic_mesh_surface_mode = {magic_mesh_surface_mode}\\n; machine_extruder_count = {machine_extruder_count}\\n; --- Single Extruder Settings\\n; speed_z_hop = {speed_z_hop}\\n; retraction_amount = {retraction_amount}\\n; retraction_hop = {retraction_hop}\\n; retraction_hop_enabled = {retraction_hop_enabled}\\n; retraction_enable = {retraction_enable}\\n; retraction_speed = {retraction_speed}\\n; retraction_retract_speed = {retraction_retract_speed}\\n; retraction_prime_speed = {retraction_prime_speed}\\n; speed_travel = {speed_travel}\\n\\nM355 S1 P25;turn on case light\\n\\n;material_bed_temperature={material_bed_temperature} material_print_temperature={material_print_temperature} material_print_temperature_layer_0={material_print_temperature_layer_0}\\nM190 S{material_bed_temperature_layer_0}\\nG21 ;metric values\\nG90 ;absolute positioning\\nM82 ;set extruder to absolute mode\\nM107 ;start with the fan off\\nM200 D0 T{initial_extruder_nr} ;reset filament diameter\\nG28 ;home all\\nT{initial_extruder_nr} ;switch to the first nozzle used for print\\nM104 T{initial_extruder_nr} S{material_standby_temperature, initial_extruder_nr}\\nG0 X25 Y20 F7200 ;change Y20 to Y0 ansonl\\nG0 Z20 F2400\\nM109 T{initial_extruder_nr} S{material_print_temperature_layer_0, initial_extruder_nr}\\nG0 X210 Y0 F7200\\nG92 E-12.0 ; increase purge 6.5 to 12\\nG1 E0 F200 ;purge nozzle ;change F45 to F200 like ultimaker code ansonl\\nG1 E-6.5 F1500\\nG1 E0 F1500\\nG1 Y50 F9000 ;add quick movement to Y50 like ultimaker code ansonl\\nM400 ;finish all moves\\nT{initial_extruder_nr}\\n;end of startup sequence\\n\\nM355 S1 P50;turn on case light\""
|
||||
},
|
||||
"machine_end_gcode" : {
|
||||
"value": "\"\" if machine_gcode_flavor == \"UltiGCode\" else \";end code from UM3\\nG91 ;Relative movement\\nG0 F15000 X8.0 Y8.0 Z3.5 E-4.5 ;Wiping+material retraction ;increase bed lower 0.5>5.0 and add Y movement\\nG0 F10000 Z1.5 E4.5 ;Compensation for the retraction\\nG90 ;Disable relative movement\\n\\nG90 ;absolute positioning\\nM104 S0 T0 ;extruder heater off\\nM104 S0 T1\\nM140 S0 ;turn off bed\\nT0 ; move to the first head\\nM107 ;fan off\\nM355 S0 ;turn off case light\""
|
||||
}
|
||||
}
|
||||
}
|
||||
33
resources/definitions/dxu_umo_dual.def.json
Normal file
33
resources/definitions/dxu_umo_dual.def.json
Normal file
|
|
@ -0,0 +1,33 @@
|
|||
{
|
||||
"version": 2,
|
||||
"name": "UMO+ DXU Dual",
|
||||
"inherits": "dxu_dual",
|
||||
"overrides": {
|
||||
"machine_disallowed_areas": {
|
||||
"default_value": [
|
||||
[[100, -102.5], [ 110, -102.5], [ 110, -62.5], [100, -62.5]]
|
||||
]
|
||||
},
|
||||
"machine_width": { "default_value": 220 },
|
||||
"machine_depth": { "default_value": 205 },
|
||||
"machine_height": { "default_value": 200 },
|
||||
"machine_nozzle_heat_up_speed": {
|
||||
"default_value": 1.95
|
||||
},
|
||||
"machine_nozzle_cool_down_speed": {
|
||||
"default_value": 0.8
|
||||
},
|
||||
"machine_nozzle_size": {
|
||||
"default_value": 0.4
|
||||
},
|
||||
"material_diameter": {
|
||||
"default_value": 1.75
|
||||
},
|
||||
"machine_start_gcode" : {
|
||||
"value": "\"\" if machine_gcode_flavor == \"UltiGCode\" else \"; Script based on an original created by tjjfvi (https://github.com/tjjfvi)\\n; An up-to-date version of the tjjfvi's original script can be found\\n; here: https://csi.t6.fyi/\\n; Note - This script will only work in Cura V4.2 and above!\\n; --- Global Settings\\n; layer_height = {layer_height}\\n; smooth_spiralized_contours = {smooth_spiralized_contours}\\n; magic_mesh_surface_mode = {magic_mesh_surface_mode}\\n; machine_extruder_count = {machine_extruder_count}\\n; --- Single Extruder Settings\\n; speed_z_hop = {speed_z_hop}\\n; retraction_amount = {retraction_amount}\\n; retraction_hop = {retraction_hop}\\n; retraction_hop_enabled = {retraction_hop_enabled}\\n; retraction_enable = {retraction_enable}\\n; retraction_speed = {retraction_speed}\\n; retraction_retract_speed = {retraction_retract_speed}\\n; retraction_prime_speed = {retraction_prime_speed}\\n; speed_travel = {speed_travel}\\n; --- Multi-Extruder Settings\\n; speed_z_hop_0 = {speed_z_hop, 0}\\n; speed_z_hop_1 = {speed_z_hop, 1}\\n; retraction_amount_0 = {retraction_amount, 0}\\n; retraction_amount_1 = {retraction_amount, 1}\\n; retraction_hop_0 = {retraction_hop, 0}\\n; retraction_hop_1 = {retraction_hop, 1}\\n; retraction_hop_enabled_0 = {retraction_hop_enabled, 0}\\n; retraction_hop_enabled_1 = {retraction_hop_enabled, 1}\\n; retraction_prime_speed_0 = {retraction_prime_speed, 0}\\n; retraction_prime_speed_1 = {retraction_prime_speed, 1}\\n; retraction_retract_speed_0 = {retraction_retract_speed, 0}\\n; retraction_retract_speed_1 = {retraction_retract_speed, 1}\\n; retraction_speed_0 = {retraction_speed, 0}\\n; retraction_speed_1 = {retraction_speed, 1}\\n; retraction_enable_0 = {retraction_enable, 0}\\n; retraction_enable_1 = {retraction_enable, 1}\\n; speed_travel_0 = {speed_travel, 0}\\n; speed_travel_1 = {speed_travel, 1}\\n\\nM355 S1 P25;turn on case light\\n\\n;material_bed_temperature={material_bed_temperature} material_print_temperature={material_print_temperature} material_print_temperature_layer_0={material_print_temperature_layer_0}\\nM190 S{material_bed_temperature_layer_0}\\nM104 T0 S{material_standby_temperature, 0}\\nM104 T0 S{material_print_temperature_layer_0, 0}\\nG21 ;metric values\\nG90 ;absolute positioning\\nM82 ;set extruder to absolute mode\\nM107 ;start with the fan off\\nM200 D0 T0 ;reset filament diameter\\nM200 D0 T1\\nG28 ;home all\\nT1 ; move to the nozzle 2\\nG0 Z20 F2400 ;move the platform to 30mm\\nM109 T1 S{material_print_temperature_layer_0, 1}\\nG0 X210 Y0 F7200 ;change Y20 to Y0 ansonl\\nG92 E0\\nG92 E-12.0 ;prime distance ;increase purge 6.5 to 12\\nG1 E0 F200 ;purge nozzle ;change F45 to F200 like ultimaker code ansonl\\nG1 E-6.5 F1500 ; retract\\nT0 ; move to the nozzle 1\\nM104 T1 S{material_standby_temperature, 1}\\nG0 Z20 F2400\\nM109 T0 S{material_print_temperature_layer_0, 0}\\nG0 X210 Y0 F7200 ;change Y20 to Y0 ansonl\\nG92 E0\\nG92 E-12.0\\nG1 E0 F200 ;purge nozzle\\nG1 E-6.5 F1500\\nM104 T0 S{material_standby_temperature, 0}\\nT{initial_extruder_nr} ;switch to the first nozzle used for print\\nM109 T{initial_extruder_nr} S{material_print_temperature_layer_0, initial_extruder_nr}\\nM400 ;finish all moves\\nG1 E0 F1500\\nG92 E0\\nG1 Y100 F9000 ;add quick movement to Y50 like ultimaker code ansonl\\n;end of startup sequence\\n\\nM355 S1 P50;turn on case light\""
|
||||
},
|
||||
"machine_end_gcode" : {
|
||||
"value": "\"\" if machine_gcode_flavor == \"UltiGCode\" else \";end code from UM3\\nG91 ;Relative movement\\nG0 F15000 X8.0 Y8.0 Z3.5 E-4.5 ;Wiping+material retraction ;increase bed lower 0.5>5.0 and add Y movement\\nG0 F10000 Z1.5 E4.5 ;Compensation for the retraction\\nG90 ;Disable relative movement\\n\\nG90 ;absolute positioning\\nM104 S0 T0 ;extruder heater off\\nM104 S0 T1\\nM140 S0 ;turn off bed\\nT0 ; move to the first head\\nM107 ;fan off\\nM355 S0 ;turn off case light\""
|
||||
}
|
||||
}
|
||||
}
|
||||
|
|
@ -4015,7 +4015,7 @@
|
|||
"maximum_value": "machine_max_feedrate_e if retraction_enable else float('inf')",
|
||||
"maximum_value_warning": "70",
|
||||
"enabled": "retraction_enable and machine_gcode_flavor != \"UltiGCode\"",
|
||||
"settable_per_mesh": false,
|
||||
"settable_per_mesh": true,
|
||||
"settable_per_extruder": true,
|
||||
"children":
|
||||
{
|
||||
|
|
@ -4032,7 +4032,7 @@
|
|||
"maximum_value_warning": "70",
|
||||
"enabled": "retraction_enable and machine_gcode_flavor != \"UltiGCode\"",
|
||||
"value": "retraction_speed",
|
||||
"settable_per_mesh": false,
|
||||
"settable_per_mesh": true,
|
||||
"settable_per_extruder": true
|
||||
},
|
||||
"retraction_prime_speed":
|
||||
|
|
@ -4048,7 +4048,7 @@
|
|||
"maximum_value_warning": "70",
|
||||
"enabled": "retraction_enable and machine_gcode_flavor != \"UltiGCode\"",
|
||||
"value": "retraction_speed",
|
||||
"settable_per_mesh": false,
|
||||
"settable_per_mesh": true,
|
||||
"settable_per_extruder": true
|
||||
}
|
||||
}
|
||||
|
|
@ -4063,7 +4063,7 @@
|
|||
"minimum_value_warning": "-0.0001",
|
||||
"maximum_value_warning": "5.0",
|
||||
"enabled": "retraction_enable",
|
||||
"settable_per_mesh": false,
|
||||
"settable_per_mesh": true,
|
||||
"settable_per_extruder": true
|
||||
},
|
||||
"retraction_min_travel":
|
||||
|
|
@ -4077,7 +4077,7 @@
|
|||
"minimum_value": "0",
|
||||
"minimum_value_warning": "line_width * 1.5",
|
||||
"maximum_value_warning": "10",
|
||||
"settable_per_mesh": false,
|
||||
"settable_per_mesh": true,
|
||||
"settable_per_extruder": true
|
||||
},
|
||||
"retraction_count_max":
|
||||
|
|
@ -4232,7 +4232,7 @@
|
|||
"type": "bool",
|
||||
"default_value": false,
|
||||
"enabled": "retraction_enable and retraction_hop_enabled and travel_avoid_other_parts",
|
||||
"settable_per_mesh": false,
|
||||
"settable_per_mesh": true,
|
||||
"settable_per_extruder": true
|
||||
},
|
||||
"retraction_hop": {
|
||||
|
|
@ -4244,7 +4244,7 @@
|
|||
"minimum_value_warning": "0",
|
||||
"maximum_value_warning": "10",
|
||||
"enabled": "retraction_enable and retraction_hop_enabled",
|
||||
"settable_per_mesh": false,
|
||||
"settable_per_mesh": true,
|
||||
"settable_per_extruder": true
|
||||
},
|
||||
"retraction_hop_after_extruder_switch": {
|
||||
|
|
@ -4435,6 +4435,7 @@
|
|||
"description": "Generate structures to support parts of the model which have overhangs. Without these structures, such parts would collapse during printing.",
|
||||
"type": "bool",
|
||||
"default_value": false,
|
||||
"resolve": "any(extruderValues('support_enable'))",
|
||||
"settable_per_mesh": true,
|
||||
"settable_per_extruder": false
|
||||
},
|
||||
|
|
@ -4681,6 +4682,54 @@
|
|||
"settable_per_mesh": false,
|
||||
"settable_per_extruder": true
|
||||
},
|
||||
"support_interface_wall_count":
|
||||
{
|
||||
"label": "Support Interface Wall Line Count",
|
||||
"description": "The number of walls with which to surround support interface. Adding a wall can make support print more reliably and can support overhangs better, but increases print time and material used.",
|
||||
"default_value": 0,
|
||||
"minimum_value": "0",
|
||||
"minimum_value_warning": "0",
|
||||
"maximum_value_warning": "0 if (support_skip_some_zags and support_interface_pattern == 'zigzag') else 3",
|
||||
"maximum_value": "999999",
|
||||
"type": "int",
|
||||
"value": "1 if (support_interface_pattern == 'zigzag') else 0",
|
||||
"enabled": "support_interface_enable or support_meshes_present",
|
||||
"limit_to_extruder": "support_interface_extruder_nr",
|
||||
"settable_per_mesh": false,
|
||||
"settable_per_extruder": true,
|
||||
"children": {
|
||||
"support_roof_wall_count": {
|
||||
"label": "Support Roof Wall Line Count",
|
||||
"description": "The number of walls with which to surround support interface roof. Adding a wall can make support print more reliably and can support overhangs better, but increases print time and material used.",
|
||||
"default_value": 0,
|
||||
"minimum_value": "0",
|
||||
"minimum_value_warning": "0",
|
||||
"maximum_value_warning": "0 if (support_skip_some_zags and support_interface_pattern == 'zigzag') else 3",
|
||||
"maximum_value": "999999",
|
||||
"type": "int",
|
||||
"value": "support_interface_wall_count",
|
||||
"enabled": "support_interface_enable or support_meshes_present",
|
||||
"limit_to_extruder": "support_interface_extruder_nr",
|
||||
"settable_per_mesh": false,
|
||||
"settable_per_extruder": true
|
||||
},
|
||||
"support_bottom_wall_count": {
|
||||
"label": "Support Bottom Wall Line Count",
|
||||
"description": "The number of walls with which to surround support interface floor. Adding a wall can make support print more reliably and can support overhangs better, but increases print time and material used.",
|
||||
"default_value": 0,
|
||||
"minimum_value": "0",
|
||||
"minimum_value_warning": "0",
|
||||
"maximum_value_warning": "0 if (support_skip_some_zags and support_interface_pattern == 'zigzag') else 3",
|
||||
"maximum_value": "999999",
|
||||
"type": "int",
|
||||
"value": "support_interface_wall_count",
|
||||
"enabled": "support_interface_enable or support_meshes_present",
|
||||
"limit_to_extruder": "support_interface_extruder_nr",
|
||||
"settable_per_mesh": false,
|
||||
"settable_per_extruder": true
|
||||
}
|
||||
}
|
||||
},
|
||||
"zig_zaggify_support":
|
||||
{
|
||||
"label": "Connect Support Lines",
|
||||
|
|
@ -4784,7 +4833,6 @@
|
|||
"default_value": 8.0,
|
||||
"minimum_value": "0.0",
|
||||
"maximum_value_warning": "50.0",
|
||||
"maximum_value": "0.5 * min(machine_width, machine_depth)",
|
||||
"enabled": "(support_enable or support_meshes_present) and support_brim_enable",
|
||||
"settable_per_mesh": false,
|
||||
"settable_per_extruder": true,
|
||||
|
|
@ -4799,7 +4847,6 @@
|
|||
"default_value": 20,
|
||||
"minimum_value": "0",
|
||||
"maximum_value_warning": "50 / skirt_brim_line_width",
|
||||
"maximum_value": "0.5 * min(machine_width, machine_depth) / skirt_brim_line_width",
|
||||
"value": "math.ceil(support_brim_width / (skirt_brim_line_width * initial_layer_line_width_factor / 100.0))",
|
||||
"enabled": "(support_enable or support_meshes_present) and support_brim_enable",
|
||||
"settable_per_mesh": false,
|
||||
|
|
@ -5558,10 +5605,11 @@
|
|||
{
|
||||
"label": "Skirt/Brim Extruder",
|
||||
"description": "The extruder train to use for printing the skirt or brim. This is used in multi-extrusion.",
|
||||
"type": "extruder",
|
||||
"type": "optional_extruder",
|
||||
"default_value": "0",
|
||||
"value": "adhesion_extruder_nr",
|
||||
"enabled": "extruders_enabled_count > 1 and (resolveOrValue('adhesion_type') == 'skirt' or resolveOrValue('adhesion_type') == 'brim' or resolveOrValue('prime_tower_brim_enable'))",
|
||||
"resolve": "'-1' if '-1' in extruderValues('skirt_brim_extruder_nr') else adhesion_extruder_nr",
|
||||
"settable_per_mesh": false,
|
||||
"settable_per_extruder": false
|
||||
},
|
||||
|
|
@ -5613,9 +5661,9 @@
|
|||
"maximum_value_warning": "10",
|
||||
"maximum_value": "0.5 * min(machine_width, machine_depth) / skirt_brim_line_width",
|
||||
"enabled": "resolveOrValue('adhesion_type') == 'skirt'",
|
||||
"limit_to_extruder": "skirt_brim_extruder_nr",
|
||||
"settable_per_mesh": false,
|
||||
"settable_per_extruder": true,
|
||||
"limit_to_extruder": "skirt_brim_extruder_nr"
|
||||
"settable_per_extruder": true
|
||||
},
|
||||
"skirt_gap":
|
||||
{
|
||||
|
|
@ -5627,9 +5675,9 @@
|
|||
"minimum_value_warning": "max(extruderValues('machine_nozzle_size'))",
|
||||
"maximum_value_warning": "10",
|
||||
"enabled": "resolveOrValue('adhesion_type') == 'skirt'",
|
||||
"limit_to_extruder": "skirt_brim_extruder_nr",
|
||||
"settable_per_mesh": false,
|
||||
"settable_per_extruder": true,
|
||||
"limit_to_extruder": "skirt_brim_extruder_nr"
|
||||
"settable_per_extruder": true
|
||||
},
|
||||
"skirt_brim_minimal_length":
|
||||
{
|
||||
|
|
@ -5642,6 +5690,7 @@
|
|||
"minimum_value_warning": "25",
|
||||
"maximum_value_warning": "2500",
|
||||
"enabled": "resolveOrValue('adhesion_type') == 'skirt' or resolveOrValue('adhesion_type') == 'brim' or resolveOrValue('prime_tower_brim_enable')",
|
||||
"limit_to_extruder": "skirt_brim_extruder_nr",
|
||||
"settable_per_mesh": false,
|
||||
"settable_per_extruder": true
|
||||
},
|
||||
|
|
@ -5654,11 +5703,10 @@
|
|||
"default_value": 8.0,
|
||||
"minimum_value": "0.0",
|
||||
"maximum_value_warning": "50.0",
|
||||
"maximum_value": "0.5 * min(machine_width, machine_depth)",
|
||||
"enabled": "resolveOrValue('adhesion_type') == 'brim' or resolveOrValue('prime_tower_brim_enable')",
|
||||
"limit_to_extruder": "skirt_brim_extruder_nr",
|
||||
"settable_per_mesh": false,
|
||||
"settable_per_extruder": true,
|
||||
"limit_to_extruder": "skirt_brim_extruder_nr",
|
||||
"children":
|
||||
{
|
||||
"brim_line_count":
|
||||
|
|
@ -5669,12 +5717,11 @@
|
|||
"default_value": 20,
|
||||
"minimum_value": "0",
|
||||
"maximum_value_warning": "50 / skirt_brim_line_width",
|
||||
"maximum_value": "0.5 * min(machine_width, machine_depth) / skirt_brim_line_width",
|
||||
"value": "math.ceil(brim_width / (skirt_brim_line_width * initial_layer_line_width_factor / 100.0))",
|
||||
"enabled": "resolveOrValue('adhesion_type') == 'brim' or resolveOrValue('prime_tower_brim_enable')",
|
||||
"limit_to_extruder": "skirt_brim_extruder_nr",
|
||||
"settable_per_mesh": false,
|
||||
"settable_per_extruder": true,
|
||||
"limit_to_extruder": "skirt_brim_extruder_nr"
|
||||
"settable_per_extruder": true
|
||||
}
|
||||
}
|
||||
},
|
||||
|
|
@ -5688,9 +5735,9 @@
|
|||
"minimum_value": "0",
|
||||
"maximum_value_warning": "skirt_brim_line_width",
|
||||
"enabled": "resolveOrValue('adhesion_type') == 'brim'",
|
||||
"limit_to_extruder": "skirt_brim_extruder_nr",
|
||||
"settable_per_mesh": true,
|
||||
"settable_per_extruder": true,
|
||||
"limit_to_extruder": "skirt_brim_extruder_nr"
|
||||
"settable_per_extruder": true
|
||||
},
|
||||
"brim_replaces_support":
|
||||
{
|
||||
|
|
@ -5699,9 +5746,9 @@
|
|||
"type": "bool",
|
||||
"default_value": true,
|
||||
"enabled": "resolveOrValue('adhesion_type') == 'brim' and (support_enable or support_meshes_present)",
|
||||
"limit_to_extruder": "skirt_brim_extruder_nr",
|
||||
"settable_per_mesh": false,
|
||||
"settable_per_extruder": true,
|
||||
"limit_to_extruder": "support_infill_extruder_nr"
|
||||
"settable_per_extruder": true
|
||||
},
|
||||
"brim_outside_only":
|
||||
{
|
||||
|
|
@ -5710,9 +5757,22 @@
|
|||
"type": "bool",
|
||||
"default_value": true,
|
||||
"enabled": "resolveOrValue('adhesion_type') == 'brim'",
|
||||
"limit_to_extruder": "skirt_brim_extruder_nr",
|
||||
"settable_per_mesh": false,
|
||||
"settable_per_extruder": true,
|
||||
"limit_to_extruder": "skirt_brim_extruder_nr"
|
||||
"settable_per_extruder": true
|
||||
},
|
||||
"brim_inside_margin":
|
||||
{
|
||||
"label": "Brim Inside Avoid Margin",
|
||||
"description": "If brim is only on outside then parts fully enclosed inside another part will get a brim which might overlap with the internal holes of the outer part. This setting controls how far to stay away from those internal holes. Set to a high value to prevent any brim from being generated for parts enclosed within the holes of other parts.",
|
||||
"unit": "mm",
|
||||
"type": "float",
|
||||
"default_value": 5,
|
||||
"minimum_value": "0",
|
||||
"enabled": "resolveOrValue('adhesion_type') == 'brim' and any(extruderValues('brim_outside_only'))",
|
||||
"limit_to_extruder": "skirt_brim_extruder_nr",
|
||||
"settable_per_mesh": false,
|
||||
"settable_per_extruder": true
|
||||
},
|
||||
"raft_margin":
|
||||
{
|
||||
|
|
@ -6334,6 +6394,81 @@
|
|||
"settable_per_mesh": false,
|
||||
"settable_per_extruder": false
|
||||
},
|
||||
"interlocking_enable":
|
||||
{
|
||||
"label": "Generate Interlocking Structure",
|
||||
"description": "Whether to generate a structure at the interface between two models of a different material in order to improve the adhesion. The structure consists of cells of horizontal beams with alternating direction which connect to each other over the Z direction in order to interlock with the beams of the other material.",
|
||||
"type": "bool",
|
||||
"enabled": "extruders_enabled_count > 1",
|
||||
"default_value": false,
|
||||
"resolve": "(extruders_enabled_count > 1) and any(extruderValues('interlocking_enable'))",
|
||||
"settable_per_mesh": false,
|
||||
"settable_per_extruder": false
|
||||
},
|
||||
"interlocking_beam_width":
|
||||
{
|
||||
"label": "Interlocking Beam Width",
|
||||
"description": "The width of the beams of this material in the interlocking structure.",
|
||||
"type": "float",
|
||||
"unit": "mm",
|
||||
"enabled": "extruders_enabled_count > 1 and resolveOrValue('interlocking_enable')",
|
||||
"default_value": 0.8,
|
||||
"value": "2 * wall_line_width_0",
|
||||
"minimum_value": "0.001",
|
||||
"maximum_value": "min(0.5 * machine_width, 0.5 * machine_depth)",
|
||||
"maximum_value_warning": "max(extruderValues('wall_line_width_0')) * 6",
|
||||
"settable_per_mesh": true,
|
||||
"settable_per_extruder": true
|
||||
},
|
||||
"interlocking_orientation":
|
||||
{
|
||||
"label": "Interlocking Structure Orientation",
|
||||
"description": "The direction of the beams of the interlocking structure in the XY plane as a rotation about the Z axis.",
|
||||
"unit": "°",
|
||||
"type": "float",
|
||||
"enabled": "extruders_enabled_count > 1 and resolveOrValue('interlocking_enable')",
|
||||
"default_value": 22.5,
|
||||
"resolve": "min(extruderValues('interlocking_orientation'))",
|
||||
"settable_per_mesh": false,
|
||||
"settable_per_extruder": false
|
||||
},
|
||||
"interlocking_beam_layer_count":
|
||||
{
|
||||
"label": "Interlocking Beam Layer Count",
|
||||
"description": "The height of the beams of the interlocking structure as measured in number of layers. Less layers is stronger, but more prone to manufacturing defects.",
|
||||
"type": "int",
|
||||
"enabled": "extruders_enabled_count > 1 and resolveOrValue('interlocking_enable')",
|
||||
"default_value": 2,
|
||||
"minimum_value": "1",
|
||||
"resolve": "max(extruderValues('interlocking_beam_layer_count'))",
|
||||
"settable_per_mesh": false,
|
||||
"settable_per_extruder": false
|
||||
},
|
||||
"interlocking_depth":
|
||||
{
|
||||
"label": "Interlocking Depth",
|
||||
"description": "The number of cells along the depth of the interface between two models where an interlocking structure is to be generated. Less cells is better, but too little cells can cause the not to be connected properly, which reduces the adhesion performance of the interlocking structure.",
|
||||
"type": "int",
|
||||
"enabled": "extruders_enabled_count > 1 and resolveOrValue('interlocking_enable')",
|
||||
"default_value": 2,
|
||||
"minimum_value": "1",
|
||||
"resolve": "max(extruderValues('interlocking_depth'))",
|
||||
"settable_per_mesh": false,
|
||||
"settable_per_extruder": false
|
||||
},
|
||||
"interlocking_boundary_avoidance":
|
||||
{
|
||||
"label": "Interlocking Boundary Avoidance",
|
||||
"description": "The distance close to the boundary of the print where not to generate an interlocking structure as measued in number of cells times 2. If set to a value lower than the Inerlocking Depth then the interlocking structure can become visible on the outside of the print near the interfaces where two models meet.",
|
||||
"type": "int",
|
||||
"enabled": "extruders_enabled_count > 1 and resolveOrValue('interlocking_enable')",
|
||||
"default_value": 3,
|
||||
"minimum_value": "0",
|
||||
"resolve": "max(extruderValues('interlocking_boundary_avoidance'))",
|
||||
"minimum_value_warning": "resolveOrValue('interlocking_depth')",
|
||||
"settable_per_mesh": false,
|
||||
"settable_per_extruder": false
|
||||
},
|
||||
"switch_extruder_retraction_amount":
|
||||
{
|
||||
"label": "Nozzle Switch Retraction Distance",
|
||||
|
|
@ -7849,7 +7984,7 @@
|
|||
"minimum_value_warning": "-0.0001",
|
||||
"maximum_value_warning": "10.0",
|
||||
"enabled": "wipe_retraction_enable and clean_between_layers",
|
||||
"settable_per_mesh": false,
|
||||
"settable_per_mesh": true,
|
||||
"settable_per_extruder": true,
|
||||
"settable_per_meshgroup": false
|
||||
},
|
||||
|
|
@ -7864,7 +7999,7 @@
|
|||
"minimum_value_warning": "-0.0001",
|
||||
"maximum_value_warning": "10.0",
|
||||
"enabled": "wipe_retraction_enable and clean_between_layers",
|
||||
"settable_per_mesh": false,
|
||||
"settable_per_mesh": true,
|
||||
"settable_per_extruder": true
|
||||
},
|
||||
"wipe_retraction_speed":
|
||||
|
|
@ -7897,7 +8032,7 @@
|
|||
"maximum_value_warning": "70",
|
||||
"enabled": "wipe_retraction_enable and clean_between_layers",
|
||||
"value": "wipe_retraction_speed",
|
||||
"settable_per_mesh": false,
|
||||
"settable_per_mesh": true,
|
||||
"settable_per_extruder": true
|
||||
},
|
||||
"wipe_retraction_prime_speed":
|
||||
|
|
@ -7913,7 +8048,7 @@
|
|||
"maximum_value_warning": "70",
|
||||
"enabled": "wipe_retraction_enable and clean_between_layers",
|
||||
"value": "wipe_retraction_speed",
|
||||
"settable_per_mesh": false,
|
||||
"settable_per_mesh": true,
|
||||
"settable_per_extruder": true
|
||||
}
|
||||
}
|
||||
|
|
@ -7927,7 +8062,7 @@
|
|||
"default_value": 0,
|
||||
"minimum_value": "0",
|
||||
"enabled": "clean_between_layers",
|
||||
"settable_per_mesh": false,
|
||||
"settable_per_mesh": true,
|
||||
"settable_per_extruder": true,
|
||||
"settable_per_meshgroup": false
|
||||
},
|
||||
|
|
@ -7952,7 +8087,7 @@
|
|||
"default_value": 1,
|
||||
"value": "retraction_hop",
|
||||
"enabled": "wipe_hop_enable and clean_between_layers",
|
||||
"settable_per_mesh": false,
|
||||
"settable_per_mesh": true,
|
||||
"settable_per_extruder": true,
|
||||
"settable_per_meshgroup": false
|
||||
},
|
||||
|
|
@ -7967,7 +8102,7 @@
|
|||
"minimum_value": "0",
|
||||
"minimum_value_warning": "1",
|
||||
"enabled": "wipe_hop_enable and clean_between_layers",
|
||||
"settable_per_mesh": false,
|
||||
"settable_per_mesh": true,
|
||||
"settable_per_extruder": true,
|
||||
"settable_per_meshgroup": false
|
||||
},
|
||||
|
|
@ -7992,7 +8127,7 @@
|
|||
"minimum_value": "0",
|
||||
"default_value": 5,
|
||||
"enabled": "clean_between_layers",
|
||||
"settable_per_mesh": false,
|
||||
"settable_per_mesh": true,
|
||||
"settable_per_extruder": true,
|
||||
"settable_per_meshgroup": false
|
||||
},
|
||||
|
|
@ -8004,7 +8139,7 @@
|
|||
"type": "float",
|
||||
"default_value": 20,
|
||||
"enabled": "clean_between_layers",
|
||||
"settable_per_mesh": false,
|
||||
"settable_per_mesh": true,
|
||||
"settable_per_extruder": true,
|
||||
"settable_per_meshgroup": false
|
||||
},
|
||||
|
|
|
|||
|
|
@ -9,289 +9,117 @@
|
|||
"exclude_materials": [ "generic_hips", "structur3d_dap100silicone" ]
|
||||
},
|
||||
"overrides": {
|
||||
"machine_max_feedrate_e": {
|
||||
"default_value": 45
|
||||
"acceleration_layer_0": { "value": "acceleration_topbottom" },
|
||||
"acceleration_travel_enabled": { "value": false },
|
||||
"bottom_layers": { "value": "math.ceil(round(bottom_thickness / resolveOrValue('layer_height'), 4))" },
|
||||
"bridge_enable_more_layers": { "value": false },
|
||||
"bridge_fan_speed": { "value": "cool_fan_speed_max" },
|
||||
"bridge_fan_speed_2": { "value": "cool_fan_speed_min" },
|
||||
"bridge_fan_speed_3": { "value": "cool_fan_speed_min" },
|
||||
"bridge_settings_enabled": { "value": true },
|
||||
"bridge_skin_density": { "value": "80" },
|
||||
"bridge_skin_density_2": { "value": 100 },
|
||||
"bridge_skin_density_3": { "value": 100 },
|
||||
"bridge_skin_material_flow": { "value": "skin_material_flow" },
|
||||
"bridge_skin_material_flow_2": { "value": "skin_material_flow" },
|
||||
"bridge_skin_material_flow_3": { "value": "skin_material_flow" },
|
||||
"bridge_skin_speed": { "value": "speed_topbottom" },
|
||||
"bridge_skin_speed_2": { "value": "speed_topbottom" },
|
||||
"bridge_skin_speed_3": { "value": "speed_topbottom" },
|
||||
"bridge_skin_support_threshold": { "value": 50 },
|
||||
"bridge_sparse_infill_max_density": { "value": 0 },
|
||||
"bridge_wall_coast": { "value": 0 },
|
||||
"bridge_wall_material_flow": { "value": "wall_material_flow" },
|
||||
"bridge_wall_speed": { "value": "bridge_skin_speed" },
|
||||
"cool_fan_speed_0": { "value": "cool_fan_speed_min" },
|
||||
"gradual_support_infill_steps": { "value": "2 if support_interface_enable else 0" },
|
||||
"gradual_support_infill_step_height": { "value": "4 * layer_height" },
|
||||
"infill_material_flow": { "value": "(1.95-infill_sparse_density / 100 if infill_sparse_density > 95 else 1) * material_flow" },
|
||||
"inset_direction": { "value": "'outside_in'" },
|
||||
"jerk_infill": { "minimum_value_warning": 20 },
|
||||
"jerk_wall": { "minimum_value_warning": 20 },
|
||||
"jerk_wall_0": { "minimum_value_warning": 20 },
|
||||
"jerk_prime_tower": { "minimum_value_warning": 20 },
|
||||
"jerk_print":
|
||||
{
|
||||
"value": "20",
|
||||
"minimum_value_warning": 20
|
||||
},
|
||||
"material_print_temperature": {
|
||||
"minimum_value": "0"
|
||||
},
|
||||
"material_bed_temperature": {
|
||||
"jerk_print_layer_0": { "value": "max(20, jerk_wall_0)" },
|
||||
"jerk_roofing": { "minimum_value_warning": 20 },
|
||||
"jerk_support": { "minimum_value_warning": 20 },
|
||||
"jerk_support_infill": { "minimum_value_warning": 20 },
|
||||
"jerk_support_interface": { "minimum_value_warning": 20 },
|
||||
"jerk_topbottom": { "minimum_value_warning": 20 },
|
||||
"jerk_travel": { "value": "jerk_print" },
|
||||
"jerk_travel_enabled": { "value": false },
|
||||
"layer_height_0": { "value": "max(0.2, layer_height)" },
|
||||
"line_width": { "value": "machine_nozzle_size" },
|
||||
"machine_max_feedrate_e": { "default_value": 45 },
|
||||
"material_bed_temperature":
|
||||
{
|
||||
"minimum_value": "0",
|
||||
"maximum_value_warning": "125"
|
||||
},
|
||||
"material_bed_temperature_layer_0":
|
||||
"material_bed_temperature_layer_0": { "maximum_value_warning": "125" },
|
||||
"material_print_temperature": { "minimum_value": "0" },
|
||||
"material_standby_temperature":
|
||||
{
|
||||
"maximum_value_warning": "125"
|
||||
},
|
||||
"material_standby_temperature": {
|
||||
"value": "material_print_temperature - 100",
|
||||
"minimum_value": "0"
|
||||
},
|
||||
"extruder_prime_pos_y":
|
||||
{
|
||||
"minimum_value": "0",
|
||||
"maximum_value": "machine_depth"
|
||||
},
|
||||
"extruder_prime_pos_x":
|
||||
{
|
||||
"minimum_value": "0",
|
||||
"maximum_value": "machine_width"
|
||||
},
|
||||
"meshfix_maximum_deviation": { "value": "machine_nozzle_size / 10" },
|
||||
"meshfix_maximum_resolution": { "value": "max(speed_wall_0 / 75, 0.5)" },
|
||||
"minimum_support_area": { "value": "4.0" },
|
||||
"raft_base_speed": { "value": "raft_speed" },
|
||||
"raft_base_thickness": { "value": "min(machine_nozzle_size * 0.75, 0.3)" },
|
||||
"raft_interface_fan_speed": { "value": "(raft_base_fan_speed + raft_surface_fan_speed) / 2" },
|
||||
"raft_interface_line_width": { "value": "(raft_base_line_width + raft_surface_line_width) / 2" },
|
||||
"raft_interface_speed": { "value": "(raft_surface_speed + raft_base_speed) / 2" },
|
||||
"raft_interface_thickness": { "value": "(raft_base_thickness + raft_surface_thickness) / 2" },
|
||||
"raft_speed": { "value": 15 },
|
||||
"raft_surface_fan_speed": { "value": "cool_fan_speed_min" },
|
||||
"raft_surface_speed": { "value": "speed_topbottom" },
|
||||
"relative_extrusion":
|
||||
{
|
||||
"value": false,
|
||||
"enabled": false
|
||||
},
|
||||
"skin_angles": {
|
||||
"value": "[] if infill_pattern not in ['cross', 'cross_3d'] else [20, 110]"
|
||||
},
|
||||
"line_width": {
|
||||
"value": "machine_nozzle_size"
|
||||
},
|
||||
"wall_thickness": {
|
||||
"value": "wall_line_width_0 + wall_line_width_x"
|
||||
},
|
||||
"infill_material_flow": {
|
||||
"value": "(1.95-infill_sparse_density / 100 if infill_sparse_density > 95 else 1) * material_flow"
|
||||
},
|
||||
"inset_direction": {
|
||||
"value": "'outside_in'"
|
||||
},
|
||||
"retraction_combing": {
|
||||
"value": "'no_outer_surfaces'"
|
||||
},
|
||||
"retraction_count_max": {
|
||||
"value": 25
|
||||
},
|
||||
"retraction_extrusion_window": {
|
||||
"value": 1
|
||||
},
|
||||
"roofing_layer_count": {
|
||||
"value": "1"
|
||||
},
|
||||
"roofing_material_flow": {
|
||||
"value": "material_flow"
|
||||
},
|
||||
"skin_material_flow": {
|
||||
"value": "0.95 * material_flow"
|
||||
},
|
||||
"support_interface_material_flow": {
|
||||
"value": "skin_material_flow"
|
||||
},
|
||||
"skin_monotonic" : {
|
||||
"value": "roofing_layer_count == 0"
|
||||
},
|
||||
"speed_equalize_flow_width_factor": {
|
||||
"value": "110.0"
|
||||
},
|
||||
"top_layers": {
|
||||
"value": "math.ceil(round(top_thickness / resolveOrValue('layer_height'), 4))"
|
||||
},
|
||||
"bottom_layers": {
|
||||
"value": "math.ceil(round(bottom_thickness / resolveOrValue('layer_height'), 4))"
|
||||
},
|
||||
"xy_offset": {
|
||||
"value": "-layer_height * 0.1"
|
||||
},
|
||||
"meshfix_maximum_resolution": {
|
||||
"value": "max(speed_wall_0 / 75, 0.5)"
|
||||
},
|
||||
"meshfix_maximum_deviation": {
|
||||
"value": "machine_nozzle_size / 10"
|
||||
},
|
||||
"jerk_travel_enabled": {
|
||||
"value": false
|
||||
},
|
||||
"acceleration_travel_enabled": {
|
||||
"value": false
|
||||
},
|
||||
"acceleration_travel": {
|
||||
"value": "acceleration_wall"
|
||||
},
|
||||
"skin_edge_support_thickness": {
|
||||
"value": "4 * layer_height if infill_sparse_density < 30 else 0"
|
||||
},
|
||||
"bridge_settings_enabled": {
|
||||
"value": true
|
||||
},
|
||||
"bridge_skin_support_threshold": {
|
||||
"value": 50
|
||||
},
|
||||
"bridge_sparse_infill_max_density": {
|
||||
"value": 0
|
||||
},
|
||||
"bridge_wall_coast": {
|
||||
"value": 0
|
||||
},
|
||||
"bridge_wall_speed": {
|
||||
"value": "bridge_skin_speed"
|
||||
},
|
||||
"bridge_wall_material_flow": {
|
||||
"value": "wall_material_flow"
|
||||
},
|
||||
"bridge_skin_speed": {
|
||||
"value": "speed_topbottom"
|
||||
},
|
||||
"bridge_skin_material_flow": {
|
||||
"value": "skin_material_flow"
|
||||
},
|
||||
"bridge_skin_density": {
|
||||
"value": "80"
|
||||
},
|
||||
"bridge_fan_speed": {
|
||||
"value": "cool_fan_speed_max"
|
||||
},
|
||||
"bridge_enable_more_layers": {
|
||||
"value": false
|
||||
},
|
||||
"bridge_skin_speed_2": {
|
||||
"value": "speed_topbottom"
|
||||
},
|
||||
"bridge_skin_material_flow_2": {
|
||||
"value": "skin_material_flow"
|
||||
},
|
||||
"bridge_skin_density_2": {
|
||||
"value": 100
|
||||
},
|
||||
"bridge_fan_speed_2": {
|
||||
"value": "cool_fan_speed_min"
|
||||
},
|
||||
"bridge_skin_speed_3": {
|
||||
"value": "speed_topbottom"
|
||||
},
|
||||
"bridge_skin_material_flow_3": {
|
||||
"value": "skin_material_flow"
|
||||
},
|
||||
"bridge_skin_density_3": {
|
||||
"value": 100
|
||||
},
|
||||
"bridge_fan_speed_3": {
|
||||
"value": "cool_fan_speed_min"
|
||||
},
|
||||
"jerk_print": {
|
||||
"value": "20",
|
||||
"minimum_value_warning": 20
|
||||
},
|
||||
"jerk_infill": {
|
||||
"minimum_value_warning": 20
|
||||
},
|
||||
"jerk_wall": {
|
||||
"minimum_value_warning": 20
|
||||
},
|
||||
"jerk_wall_0": {
|
||||
"minimum_value_warning": 20
|
||||
},
|
||||
"jerk_roofing": {
|
||||
"minimum_value_warning": 20
|
||||
},
|
||||
"jerk_topbottom": {
|
||||
"minimum_value_warning": 20
|
||||
},
|
||||
"jerk_support": {
|
||||
"minimum_value_warning": 20
|
||||
},
|
||||
"jerk_support_infill": {
|
||||
"minimum_value_warning": 20
|
||||
},
|
||||
"jerk_support_interface": {
|
||||
"minimum_value_warning": 20
|
||||
},
|
||||
"jerk_prime_tower": {
|
||||
"minimum_value_warning": 20
|
||||
},
|
||||
"jerk_layer_0": {
|
||||
"minimum_value_warning": 20
|
||||
},
|
||||
"jerk_print_layer_0": {
|
||||
"minimum_value_warning": 20
|
||||
},
|
||||
"jerk_travel": {
|
||||
"value": "jerk_print",
|
||||
"minimum_value_warning": 20
|
||||
},
|
||||
"jerk_travel_layer_0": {
|
||||
"minimum_value_warning": 20
|
||||
},
|
||||
"jerk_skirt_brim": {
|
||||
"minimum_value_warning": 20
|
||||
},
|
||||
"support_wall_count": {
|
||||
"value": "1 if support_structure == 'tree' else 0"
|
||||
},
|
||||
"zig_zaggify_support": {
|
||||
"value": true
|
||||
},
|
||||
"support_infill_rate": {
|
||||
"value": "0 if support_structure == 'tree' else 80 if gradual_support_infill_steps != 0 else 15"
|
||||
},
|
||||
"support_line_distance": {
|
||||
"minimum_value_warning": "0 if support_structure == 'tree' else support_line_width"
|
||||
},
|
||||
"support_initial_layer_line_distance": {
|
||||
"minimum_value_warning": "0 if support_structure == 'tree' else support_line_width"
|
||||
},
|
||||
"gradual_support_infill_steps": {
|
||||
"value": "2 if support_interface_enable else 0"
|
||||
},
|
||||
"gradual_support_infill_step_height": {
|
||||
"value": "4 * layer_height"
|
||||
},
|
||||
"raft_base_speed": {
|
||||
"value": "raft_speed"
|
||||
},
|
||||
"raft_base_thickness": {
|
||||
"value": "min(machine_nozzle_size * 0.75, 0.3)"
|
||||
},
|
||||
"raft_interface_fan_speed": {
|
||||
"value": "(raft_base_fan_speed + raft_surface_fan_speed) / 2"
|
||||
},
|
||||
"raft_interface_line_width": {
|
||||
"value": "(raft_base_line_width + raft_surface_line_width) / 2"
|
||||
},
|
||||
"raft_interface_speed": {
|
||||
"value": "(raft_surface_speed + raft_base_speed) / 2"
|
||||
},
|
||||
"raft_interface_thickness": {
|
||||
"value": "(raft_base_thickness + raft_surface_thickness) / 2"
|
||||
},
|
||||
"raft_speed": {
|
||||
"value": 15
|
||||
},
|
||||
"raft_surface_fan_speed": {
|
||||
"value": "cool_fan_speed"
|
||||
},
|
||||
"raft_surface_speed": {
|
||||
"value": "speed_topbottom"
|
||||
},
|
||||
"support_interface_height": {
|
||||
"value": "2 * layer_height"
|
||||
},
|
||||
"support_offset": {
|
||||
"value": "support_xy_distance if support_interface_enable else 0"
|
||||
},
|
||||
"support_xy_distance": {
|
||||
"value": "1"
|
||||
},
|
||||
"support_xy_distance_overhang": {
|
||||
"value": "0.2"
|
||||
},
|
||||
"minimum_support_area": {
|
||||
"value": "(2 + support_offset)**2"
|
||||
},
|
||||
"support_interface_skip_height": {
|
||||
"value": "layer_height"
|
||||
},
|
||||
"support_interface_pattern": {
|
||||
"value": "'concentric'"
|
||||
},
|
||||
"support_interface_offset": {
|
||||
"value": "support_offset"
|
||||
},
|
||||
"support_use_towers": {
|
||||
"value": false
|
||||
},
|
||||
"support_z_distance": {
|
||||
"value": "0"
|
||||
}
|
||||
"retraction_combing": { "value": "'no_outer_surfaces'" },
|
||||
"retraction_combing_max_distance": { "value": 15 },
|
||||
"retraction_count_max": { "value": 25 },
|
||||
"retraction_extrusion_window": { "value": 1 },
|
||||
"roofing_layer_count": { "value": "1" },
|
||||
"roofing_material_flow": { "value": "material_flow" },
|
||||
"skin_angles": { "value": "[] if infill_pattern not in ['cross', 'cross_3d'] else [20, 110]" },
|
||||
"skin_edge_support_thickness": { "value": "4 * layer_height if infill_sparse_density < 30 else 0" },
|
||||
"skin_material_flow": { "value": "0.95 * material_flow" },
|
||||
"skin_material_flow_layer_0": { "value": "0.85 * material_flow_layer_0" },
|
||||
"skin_monotonic" : { "value": "roofing_layer_count == 0" },
|
||||
"speed_equalize_flow_width_factor": { "value": "110.0" },
|
||||
"speed_layer_0": { "value": "min(30, layer_height / layer_height_0 * speed_wall_0)" },
|
||||
"speed_slowdown_layers": { "value": 1 },
|
||||
"speed_travel_layer_0": { "value": "speed_travel" },
|
||||
"support_infill_rate": { "value": "0 if support_structure == 'tree' else 80 if gradual_support_infill_steps != 0 else 15" },
|
||||
"support_initial_layer_line_distance": { "minimum_value_warning": "0 if support_structure == 'tree' else support_line_width" },
|
||||
"support_interface_height": { "value": "2 * layer_height" },
|
||||
"support_interface_material_flow": { "value": "skin_material_flow" },
|
||||
"support_interface_offset": { "value": "support_offset" },
|
||||
"support_interface_pattern": { "value": "'concentric'" },
|
||||
"support_interface_skip_height": { "value": "layer_height" },
|
||||
"support_line_distance": { "minimum_value_warning": "0 if support_structure == 'tree' else support_line_width" },
|
||||
"support_offset": { "value": "support_xy_distance if support_interface_enable else 0" },
|
||||
"support_use_towers": { "value": false },
|
||||
"support_wall_count": { "value": "1 if support_structure == 'tree' else 0" },
|
||||
"support_xy_distance": { "value": "1" },
|
||||
"support_xy_distance_overhang": { "value": "0.2" },
|
||||
"support_z_distance": { "value": "0" },
|
||||
"top_layers": { "value": "math.ceil(round(top_thickness / resolveOrValue('layer_height'), 4))" },
|
||||
"wall_0_material_flow_layer_0": { "value": "1.10 * material_flow_layer_0" },
|
||||
"wall_thickness": { "value": "wall_line_width_0 + wall_line_width_x" },
|
||||
"wall_x_material_flow_layer_0": { "value": "0.95 * material_flow_layer_0" },
|
||||
"xy_offset": { "value": "-layer_height * 0.1" },
|
||||
"xy_offset_layer_0": { "value": "-wall_line_width_0 / 5 + xy_offset" },
|
||||
"zig_zaggify_support": { "value": true }
|
||||
}
|
||||
}
|
||||
|
|
|
|||
|
|
@ -89,6 +89,15 @@
|
|||
},
|
||||
"support_z_distance": {
|
||||
"value": "0.1"
|
||||
},
|
||||
"cool_fan_speed_0": {
|
||||
"value": 0
|
||||
},
|
||||
"layer_height_0": {
|
||||
"value": 0.3
|
||||
},
|
||||
"speed_slowdown_layers": {
|
||||
"value": 2
|
||||
}
|
||||
}
|
||||
}
|
||||
|
|
|
|||
|
|
@ -70,7 +70,6 @@
|
|||
"maximum_value": 260
|
||||
},
|
||||
"material_print_temperature_layer_0": {
|
||||
"value": "material_print_temperature",
|
||||
"maximum_value": 260
|
||||
},
|
||||
"machine_start_gcode": { "value": "''" },
|
||||
|
|
|
|||
|
|
@ -82,7 +82,6 @@
|
|||
|
||||
"prime_blob_enable": { "enabled": true, "default_value": true, "value": "resolveOrValue('print_sequence') != 'one_at_a_time'" },
|
||||
"acceleration_enabled": { "value": true },
|
||||
"acceleration_layer_0": { "value": "acceleration_topbottom" },
|
||||
"acceleration_prime_tower": { "value": "math.ceil(acceleration_print * 2000 / 3500)" },
|
||||
"acceleration_print": { "value": "3500" },
|
||||
"acceleration_support": { "value": "math.ceil(acceleration_print * 2000 / 3500)" },
|
||||
|
|
@ -91,21 +90,17 @@
|
|||
"acceleration_wall": { "value": "math.ceil(acceleration_print * 1500 / 3500)" },
|
||||
"acceleration_wall_0": { "value": "math.ceil(acceleration_wall * 1000 / 3500)" },
|
||||
"brim_width": { "value": "3" },
|
||||
"cool_fan_full_at_height": { "value": "layer_height_0 + 4 * layer_height" },
|
||||
"cool_fan_speed": { "value": "50" },
|
||||
"cool_fan_speed_max": { "value": "100" },
|
||||
"cool_min_speed": { "value": "5" },
|
||||
"infill_overlap": { "value": "0" },
|
||||
"infill_pattern": { "value": "'zigzag' if infill_sparse_density > 80 else 'triangles'" },
|
||||
"infill_wipe_dist": { "value": "0" },
|
||||
"initial_layer_line_width_factor": { "value": "120" },
|
||||
"jerk_enabled": { "value": "True" },
|
||||
"layer_height_0": { "value": "round(machine_nozzle_size / 1.5, 2)" },
|
||||
"layer_start_x": { "value": "sum(extruderValues('machine_extruder_start_pos_x')) / len(extruderValues('machine_extruder_start_pos_x'))" },
|
||||
"layer_start_y": { "value": "sum(extruderValues('machine_extruder_start_pos_y')) / len(extruderValues('machine_extruder_start_pos_y'))" },
|
||||
"machine_min_cool_heat_time_window": { "value": "15" },
|
||||
"default_material_print_temperature": { "value": "200" },
|
||||
"material_print_temperature_layer_0": { "value": "material_print_temperature + 5" },
|
||||
"material_bed_temperature": { "maximum_value": "115" },
|
||||
"material_bed_temperature_layer_0": { "maximum_value": "115" },
|
||||
"multiple_mesh_overlap": { "value": "0" },
|
||||
|
|
@ -118,7 +113,6 @@
|
|||
"retraction_min_travel": { "value": "5" },
|
||||
"retraction_prime_speed": { "value": "15" },
|
||||
"skin_overlap": { "value": "10" },
|
||||
"speed_layer_0": { "value": "20" },
|
||||
"speed_prime_tower": { "value": "speed_topbottom" },
|
||||
"speed_print": { "value": "35" },
|
||||
"speed_support": { "value": "speed_wall_0" },
|
||||
|
|
|
|||
|
|
@ -62,6 +62,15 @@
|
|||
},
|
||||
"infill_before_walls": {
|
||||
"value": "False"
|
||||
},
|
||||
"cool_fan_speed_0": {
|
||||
"value": 0
|
||||
},
|
||||
"layer_height_0": {
|
||||
"value": 0.3
|
||||
},
|
||||
"speed_slowdown_layers": {
|
||||
"value": 2
|
||||
}
|
||||
}
|
||||
}
|
||||
|
|
|
|||
|
|
@ -74,8 +74,6 @@
|
|||
"maximum_value": "150",
|
||||
"value": "150"
|
||||
},
|
||||
|
||||
"acceleration_layer_0": { "value": "acceleration_topbottom" },
|
||||
"acceleration_prime_tower": { "value": "math.ceil(acceleration_print * 2000 / 3500)" },
|
||||
"acceleration_print": { "value": "3500" },
|
||||
"acceleration_support": { "value": "math.ceil(acceleration_print * 2000 / 3500)" },
|
||||
|
|
@ -84,7 +82,6 @@
|
|||
"acceleration_wall": { "value": "math.ceil(acceleration_print * 1500 / 3500)" },
|
||||
"acceleration_wall_0": { "value": "math.ceil(acceleration_wall * 1000 / 1000)" },
|
||||
"brim_width": { "value": "3" },
|
||||
"cool_fan_full_at_height": { "value": "layer_height_0 + 4 * layer_height" },
|
||||
"cool_fan_speed": { "value": "50" },
|
||||
"cool_fan_speed_max": { "value": "100" },
|
||||
"cool_min_speed": { "value": "5" },
|
||||
|
|
@ -92,7 +89,6 @@
|
|||
"infill_pattern": { "value": "'zigzag' if infill_sparse_density > 80 else 'triangles'" },
|
||||
"infill_wipe_dist": { "value": "0" },
|
||||
"jerk_enabled": { "value": "True" },
|
||||
"layer_height_0": { "value": "round(machine_nozzle_size / 1.5, 2)" },
|
||||
"layer_start_x": { "value": "sum(extruderValues('machine_extruder_start_pos_x')) / len(extruderValues('machine_extruder_start_pos_x'))" },
|
||||
"layer_start_y": { "value": "sum(extruderValues('machine_extruder_start_pos_y')) / len(extruderValues('machine_extruder_start_pos_y'))" },
|
||||
"machine_min_cool_heat_time_window": { "value": "15" },
|
||||
|
|
@ -108,7 +104,6 @@
|
|||
"retraction_prime_speed": { "value": "15" },
|
||||
"retraction_speed": {"value": "45" },
|
||||
"skin_overlap": { "value": "10" },
|
||||
"speed_layer_0": { "value": "20" },
|
||||
"speed_prime_tower": { "value": "speed_topbottom" },
|
||||
"speed_print": { "value": "35" },
|
||||
"speed_support": { "value": "speed_wall_0" },
|
||||
|
|
@ -123,7 +118,6 @@
|
|||
"top_bottom_thickness": { "value": "1" },
|
||||
"travel_avoid_distance": { "value": "3 if extruders_enabled_count > 1 else machine_nozzle_tip_outer_diameter / 2 * 1.5" },
|
||||
"wall_0_inset": { "value": "0" },
|
||||
"initial_layer_line_width_factor": { "value": "120" },
|
||||
"zig_zaggify_infill": { "value": "gradual_infill_steps == 0" }
|
||||
}
|
||||
}
|
||||
|
|
|
|||
|
|
@ -77,7 +77,6 @@
|
|||
"value": "150"
|
||||
},
|
||||
"acceleration_enabled": { "value": true },
|
||||
"acceleration_layer_0": { "value": "acceleration_topbottom" },
|
||||
"acceleration_prime_tower": { "value": "math.ceil(acceleration_print * 2000 / 3500)" },
|
||||
"acceleration_print": { "value": "3500" },
|
||||
"acceleration_support": { "value": "math.ceil(acceleration_print * 2000 / 3500)" },
|
||||
|
|
@ -86,7 +85,6 @@
|
|||
"acceleration_wall": { "value": "math.ceil(acceleration_print * 1500 / 3500)" },
|
||||
"acceleration_wall_0": { "value": "math.ceil(acceleration_wall * 1000 / 1000)" },
|
||||
"brim_width": { "value": "3" },
|
||||
"cool_fan_full_at_height": { "value": "layer_height_0 + 4 * layer_height" },
|
||||
"cool_fan_speed": { "value": "50" },
|
||||
"cool_fan_speed_max": { "value": "100" },
|
||||
"cool_min_speed": { "value": "5" },
|
||||
|
|
@ -94,7 +92,6 @@
|
|||
"infill_pattern": { "value": "'zigzag' if infill_sparse_density > 80 else 'triangles'" },
|
||||
"infill_wipe_dist": { "value": "0" },
|
||||
"jerk_enabled": { "value": "True" },
|
||||
"layer_height_0": { "value": "round(machine_nozzle_size / 1.5, 2)" },
|
||||
"layer_start_x": { "value": "sum(extruderValues('machine_extruder_start_pos_x')) / len(extruderValues('machine_extruder_start_pos_x'))" },
|
||||
"layer_start_y": { "value": "sum(extruderValues('machine_extruder_start_pos_y')) / len(extruderValues('machine_extruder_start_pos_y'))" },
|
||||
"machine_min_cool_heat_time_window": { "value": "15" },
|
||||
|
|
@ -110,7 +107,6 @@
|
|||
"retraction_prime_speed": { "value": "15" },
|
||||
"retraction_speed": {"value": "45" },
|
||||
"skin_overlap": { "value": "10" },
|
||||
"speed_layer_0": { "value": "20" },
|
||||
"speed_prime_tower": { "value": "speed_topbottom" },
|
||||
"speed_print": { "value": "35" },
|
||||
"speed_support": { "value": "speed_wall_0" },
|
||||
|
|
@ -126,7 +122,6 @@
|
|||
"travel_avoid_distance": { "value": "3 if extruders_enabled_count > 1 else machine_nozzle_tip_outer_diameter / 2 * 1.5" },
|
||||
"wall_0_inset": { "value": "0" },
|
||||
"optimize_wall_printing_order": { "value": "True" },
|
||||
"initial_layer_line_width_factor": { "value": "120" },
|
||||
"zig_zaggify_infill": { "value": "gradual_infill_steps == 0" },
|
||||
"build_volume_temperature": { "maximum_value": 50 }
|
||||
}
|
||||
|
|
|
|||
Loading…
Add table
Add a link
Reference in a new issue