From c010f3203c72c9682c305c3743b8470f0de2bbfd Mon Sep 17 00:00:00 2001 From: Ghostkeeper Date: Thu, 3 Aug 2017 09:31:00 +0200 Subject: [PATCH] Sync UM3 extended variants with UM3 They should always be the same. Contributes to issue CURA-3377. --- .../ultimaker3_extended_aa04.inst.cfg | 28 ++++++++----------- .../ultimaker3_extended_bb0.8.inst.cfg | 7 +++-- .../ultimaker3_extended_bb04.inst.cfg | 6 ++-- 3 files changed, 21 insertions(+), 20 deletions(-) diff --git a/resources/variants/ultimaker3_extended_aa04.inst.cfg b/resources/variants/ultimaker3_extended_aa04.inst.cfg index f35210383e..94a13f2e74 100644 --- a/resources/variants/ultimaker3_extended_aa04.inst.cfg +++ b/resources/variants/ultimaker3_extended_aa04.inst.cfg @@ -12,34 +12,30 @@ setting_version = 2 brim_width = 7 machine_nozzle_cool_down_speed = 0.9 machine_nozzle_id = AA 0.4 -machine_nozzle_size = 0.4 +raft_acceleration = =acceleration_print raft_airgap = 0.3 -raft_base_speed = 15 -raft_base_thickness = 0.3 -raft_interface_line_spacing = 0.9 -raft_interface_line_width = 0.7 -raft_interface_speed = 15 -raft_interface_thickness = 0.15 +raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2 +raft_interface_line_spacing = =raft_interface_line_width + 0.2 +raft_interface_line_width = =line_width * 2 +raft_interface_thickness = =layer_height * 1.5 +raft_jerk = =jerk_print raft_margin = 15 -raft_speed = 20 raft_surface_layers = 2 retraction_amount = 6.5 retraction_count_max = 25 -retraction_min_travel = 1.5 -retraction_prime_speed = 25 +retraction_min_travel = =line_width * 2 +retraction_prime_speed = =retraction_speed skin_overlap = 15 speed_print = 70 -speed_layer_0 = =round(speed_print * 30 / 70) speed_topbottom = =math.ceil(speed_print * 30 / 70) speed_wall = =math.ceil(speed_print * 30 / 70) support_angle = 60 support_bottom_distance = =support_z_distance / 2 -support_infill_rate = 15 -support_join_distance = 2.0 -support_offset = 0.2 +support_pattern = zigzag support_top_distance = =support_z_distance +support_use_towers = True support_z_distance = =layer_height * 2 -switch_extruder_prime_speed = 20 -switch_extruder_retraction_amount = 20 +switch_extruder_prime_speed = =switch_extruder_retraction_speeds +switch_extruder_retraction_amount = =machine_heat_zone_length top_bottom_thickness = 1.2 wall_thickness = 1.3 diff --git a/resources/variants/ultimaker3_extended_bb0.8.inst.cfg b/resources/variants/ultimaker3_extended_bb0.8.inst.cfg index 0374068186..5bb17451c6 100644 --- a/resources/variants/ultimaker3_extended_bb0.8.inst.cfg +++ b/resources/variants/ultimaker3_extended_bb0.8.inst.cfg @@ -17,6 +17,8 @@ acceleration_support_bottom = =math.ceil(acceleration_support_interface * 100 / brim_width = 3 cool_fan_speed = 50 cool_min_speed = 5 +gradual_support_infill_step_height = 1.6 +gradual_support_infill_steps = 2 infill_line_width = =round(line_width * 0.8 / 0.7, 2) infill_overlap = 0 infill_pattern = triangles @@ -67,9 +69,10 @@ support_angle = 60 support_bottom_height = =layer_height * 2 support_bottom_pattern = zigzag support_bottom_stair_step_height = =layer_height -support_infill_rate = 25 +support_infill_rate = 50 +support_infill_sparse_thickness = 0.4 support_interface_enable = True -support_interface_height = =layer_height * 5 +support_interface_height = 0.6 support_interface_skip_height = =layer_height support_join_distance = 3 support_line_width = =round(line_width * 0.4 / 0.35, 2) diff --git a/resources/variants/ultimaker3_extended_bb04.inst.cfg b/resources/variants/ultimaker3_extended_bb04.inst.cfg index cc8fb187e8..7393b0a24a 100644 --- a/resources/variants/ultimaker3_extended_bb04.inst.cfg +++ b/resources/variants/ultimaker3_extended_bb04.inst.cfg @@ -13,12 +13,12 @@ acceleration_support = =math.ceil(acceleration_print * 2000 / 4000) acceleration_support_interface = =math.ceil(acceleration_support * 1500 / 2000) acceleration_support_bottom = =math.ceil(acceleration_support_interface * 100 / 1500) cool_fan_speed_max = =cool_fan_speed +gradual_support_infill_steps = 2 jerk_support = =math.ceil(jerk_print * 15 / 25) jerk_support_interface = =math.ceil(jerk_support * 10 / 15) jerk_support_bottom = =math.ceil(jerk_support_interface * 1 / 10) machine_nozzle_heat_up_speed = 1.5 machine_nozzle_id = BB 0.4 -material_print_temperature = 215 raft_base_speed = 20 raft_interface_speed = 20 raft_speed = 25 @@ -31,8 +31,10 @@ speed_wall_0 = =math.ceil(speed_wall * 25 / 30) support_bottom_height = =layer_height * 2 support_bottom_pattern = zigzag support_bottom_stair_step_height = =layer_height -support_infill_rate = 25 +support_infill_rate = 50 +support_infill_sparse_thickness = 0.2 support_interface_enable = True +support_interface_height = 0.6 support_interface_skip_height = =layer_height support_join_distance = 3 support_line_width = =round(line_width * 0.4 / 0.35, 2)