Add Add Machine wizard, machine definitions & profiles for Ultimaker 2 with Olsson Block

resources/profiles/ultimaker2_olsson/0.25_high.curaprofile

@@ -0,0 +1,43 @@
+[general]
+version = 1
+name = High Quality
+machine_type = ultimaker2_olsson
+machine_variant = 0.25 mm
+
+[settings]
+retraction_combing = All
+top_thickness = 0.72
+speed_layer_0 = 20
+speed_print = 20
+speed_wall_0 = 20
+raft_interface_line_spacing = 3.0
+shell_thickness = 0.88
+infill_overlap = 15
+retraction_hop = 0.0
+skin_no_small_gaps_heuristic = False
+retraction_speed = 40.0
+raft_surface_line_width = 0.4
+raft_base_line_width = 1.0
+raft_margin = 5.0
+adhesion_type = brim
+skirt_minimal_length = 150.0
+layer_height = 0.06
+brim_line_count = 36
+infill_before_walls = False
+raft_surface_thickness = 0.27
+raft_airgap = 0.0
+skirt_gap = 3.0
+raft_interface_line_width = 0.4
+speed_topbottom = 20
+support_pattern = lines
+layer_height_0 = 0.15
+infill_sparse_density = 22
+top_bottom_thickness = 0.72
+speed_infill = 30
+magic_mesh_surface_mode = False
+bottom_thickness = 0.72
+speed_wall_x = 25
+machine_nozzle_size = 0.22
+raft_surface_line_spacing = 3.0
+support_enable = False
+

resources/profiles/ultimaker2_olsson/0.4_fast.curaprofile

@@ -0,0 +1,42 @@
+[general]
+version = 1
+name = Fast Prints
+machine_type = ultimaker2_olsson
+machine_variant = 0.4 mm
+
+[settings]
+retraction_combing = All
+top_thickness = 0.75
+speed_print = 40
+speed_wall_0 = 40
+raft_surface_line_spacing = 3.0
+shell_thickness = 0.7
+infill_sparse_density = 18
+retraction_hop = 0.0
+skin_no_small_gaps_heuristic = False
+retraction_speed = 40.0
+raft_surface_line_width = 0.4
+raft_base_line_width = 1.0
+raft_margin = 5.0
+adhesion_type = brim
+skirt_minimal_length = 150.0
+layer_height = 0.15
+brim_line_count = 22
+infill_before_walls = False
+raft_surface_thickness = 0.27
+raft_airgap = 0.0
+infill_overlap = 15
+raft_interface_line_width = 0.4
+speed_topbottom = 30
+support_pattern = lines
+layer_height_0 = 0.26
+raft_interface_line_spacing = 3.0
+speed_travel = 150
+skirt_gap = 3.0
+magic_mesh_surface_mode = False
+bottom_thickness = 0.75
+speed_wall_x = 50
+machine_nozzle_size = 0.35
+top_bottom_thickness = 0.75
+support_enable = False
+

resources/profiles/ultimaker2_olsson/0.4_high.curaprofile

@@ -0,0 +1,43 @@
+[general]
+version = 1
+name = High Quality
+machine_type = ultimaker2_olsson
+machine_variant = 0.4 mm
+
+[settings]
+retraction_combing = All
+top_thickness = 0.72
+speed_layer_0 = 20
+speed_print = 30
+speed_wall_0 = 30
+raft_interface_line_spacing = 3.0
+shell_thickness = 1.05
+infill_overlap = 15
+retraction_hop = 0.0
+skin_no_small_gaps_heuristic = False
+retraction_speed = 40.0
+raft_surface_line_width = 0.4
+raft_base_line_width = 1.0
+raft_margin = 5.0
+adhesion_type = brim
+skirt_minimal_length = 150.0
+layer_height = 0.06
+brim_line_count = 22
+infill_before_walls = False
+raft_surface_thickness = 0.27
+raft_airgap = 0.0
+skirt_gap = 3.0
+raft_interface_line_width = 0.4
+speed_topbottom = 20
+support_pattern = lines
+layer_height_0 = 0.26
+infill_sparse_density = 22
+top_bottom_thickness = 0.72
+speed_infill = 50
+magic_mesh_surface_mode = False
+bottom_thickness = 0.72
+speed_wall_x = 40
+machine_nozzle_size = 0.35
+raft_surface_line_spacing = 3.0
+support_enable = False
+

resources/profiles/ultimaker2_olsson/0.4_normal.curaprofile

@@ -0,0 +1,38 @@
+[general]
+version = 1
+name = Normal Quality
+machine_type = ultimaker2_olsson
+machine_variant = 0.4 mm
+
+[settings]
+retraction_combing = All
+shell_thickness = 1.05
+speed_print = 30
+speed_wall_0 = 30
+raft_interface_line_spacing = 3.0
+speed_layer_0 = 20
+layer_height_0 = 0.26
+retraction_hop = 0.0
+skirt_gap = 3.0
+retraction_speed = 40.0
+raft_surface_line_width = 0.4
+raft_base_line_width = 1.0
+raft_margin = 5.0
+adhesion_type = brim
+skirt_minimal_length = 150.0
+brim_line_count = 22
+infill_before_walls = False
+raft_surface_thickness = 0.27
+raft_airgap = 0.0
+infill_overlap = 15
+raft_interface_line_width = 0.4
+speed_topbottom = 20
+support_pattern = lines
+speed_infill = 50
+skin_no_small_gaps_heuristic = False
+magic_mesh_surface_mode = False
+speed_wall_x = 40
+machine_nozzle_size = 0.35
+raft_surface_line_spacing = 3.0
+support_enable = False
+

resources/profiles/ultimaker2_olsson/0.6_normal.curaprofile

@@ -0,0 +1,42 @@
+[general]
+version = 1
+name = Normal Quality
+machine_type = ultimaker2_olsson
+machine_variant = 0.6 mm
+
+[settings]
+retraction_combing = All
+top_thickness = 1.2
+speed_layer_0 = 20
+speed_print = 25
+speed_wall_0 = 25
+raft_interface_line_spacing = 3.0
+shell_thickness = 1.59
+infill_overlap = 15
+retraction_hop = 0.0
+skin_no_small_gaps_heuristic = False
+retraction_speed = 40.0
+raft_surface_line_width = 0.4
+raft_base_line_width = 1.0
+raft_margin = 5.0
+adhesion_type = brim
+skirt_minimal_length = 150.0
+layer_height = 0.15
+brim_line_count = 15
+infill_before_walls = False
+raft_surface_thickness = 0.27
+raft_airgap = 0.0
+skirt_gap = 3.0
+raft_interface_line_width = 0.4
+speed_topbottom = 20
+support_pattern = lines
+layer_height_0 = 0.39
+top_bottom_thickness = 1.2
+speed_infill = 55
+magic_mesh_surface_mode = False
+bottom_thickness = 1.2
+speed_wall_x = 40
+machine_nozzle_size = 0.53
+raft_surface_line_spacing = 3.0
+support_enable = False
+

resources/profiles/ultimaker2_olsson/0.8_fast.curaprofile

@@ -0,0 +1,42 @@
+[general]
+version = 1
+name = Fast Prints
+machine_type = ultimaker2_olsson
+machine_variant = 0.8 mm
+
+[settings]
+retraction_combing = All
+top_thickness = 1.2
+speed_layer_0 = 20
+speed_print = 20
+speed_wall_0 = 25
+raft_interface_line_spacing = 3.0
+shell_thickness = 2.1
+infill_overlap = 15
+retraction_hop = 0.0
+skin_no_small_gaps_heuristic = False
+retraction_speed = 40.0
+raft_surface_line_width = 0.4
+raft_base_line_width = 1.0
+raft_margin = 5.0
+adhesion_type = brim
+skirt_minimal_length = 150.0
+layer_height = 0.2
+brim_line_count = 11
+infill_before_walls = False
+raft_surface_thickness = 0.27
+raft_airgap = 0.0
+skirt_gap = 3.0
+raft_interface_line_width = 0.4
+speed_topbottom = 20
+support_pattern = lines
+layer_height_0 = 0.5
+top_bottom_thickness = 1.2
+speed_infill = 40
+magic_mesh_surface_mode = False
+bottom_thickness = 1.2
+speed_wall_x = 30
+machine_nozzle_size = 0.7
+raft_surface_line_spacing = 3.0
+support_enable = False
+