Add files via upload

resources/quality/Leapfrog_Bolt_Pro/pva/Leapfrog_Bolt_Pro_pva_natural_standard.inst.cfg

@@ -0,0 +1,116 @@
+[general]
+version = 4
+name = Standard
+definition = leapfrog_bolt_pro
+
+[metadata]
+setting_version = 9
+type = quality
+quality_type = standard
+weight = 1
+material = leapfrog_pva_natural
+
+[values]
+layer_height_0 = 0.3
+line_width = 0.4
+initial_layer_line_width_factor = 120
+
+
+wall_thickness = 0.8
+wall_0_wipe_dist = 0.2
+top_bottom_thickness = 0.8
+top_bottom_pattern = lines
+optimize_wall_printing_order = True
+travel_compensate_overlapping_walls_enabled = True
+travel_compensate_overlapping_walls_0_enabled = True
+travel_compensate_overlapping_walls_x_enabled = True
+fill_perimeter_gaps = everywhere
+filter_out_tiny_gaps = True
+z_seam_type = sharpest_corner
+z_seam_corner = hide_seam
+skin_outline_count = 1
+
+
+
+
+infill_sparse_density = 20
+infill_pattern = grid
+connect_infill_polygons = True
+infill_overlap = 0
+infill_wipe_dist = 0
+infill_before_walls = True
+min_infill_area = 0
+
+
+retraction_enable = True
+retract_at_layer_change = False
+retraction_amount = 2
+retraction_speed = 25
+switch_extruder_retraction_amount = 15
+switch_extruder_retraction_speeds = 20
+
+
+
+speed_print = 50
+speed_wall = 20
+speed_wall_0 = 20
+speed_wall_x = 20
+speed_topbottom = 25	
+speed_travel = 200
+speed_layer_0 = 25
+speed_support = 40
+speed_travel_layer_0 = 45
+speed_slowdown_layers = 1
+speed_equalize_flow_enabled = True
+speed_equalize_flow_max = 150
+
+retraction_combing = all
+travel_avoid_other_parts = True
+travel_avoid_supports = True
+retraction_hop_enabled = False
+
+
+
+retraction_hop_after_extruder_switch_height = 2
+
+
+cool_fan_enabled = True
+cool_fan_speed = 100
+cool_fan_speed_min = 100
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 5
+cool_fan_speed_0 = 0
+cool_fan_full_at_height = 0.5
+cool_fan_full_layer = 4
+cool_min_layer_time = 5
+cool_min_speed = 5
+
+support_interface_enable = False
+support_angle = 50
+support_pattern = zigzag
+support_connect_zigzags = False
+support_infill_rate = 20
+support_z_distance = 0.3
+support_xy_distance = 0.7
+support_xy_distance_overhang = 0.4
+support_bottom_stair_step_height = 0.3
+support_bottom_stair_step_width = 5
+support_join_distance = 2
+support_tower_diameter = 3
+support_tower_roof_angle = 65
+
+
+
+adhesion_type = skirt
+skirt_line_count = 3
+skirt_gap = 1
+skirt_brim_minimal_length = 250
+
+
+prime_tower_enable = True
+prime_tower_size = 20
+prime_tower_min_volume = 6
+prime_tower_position_x = 169
+prime_tower_position_y = 25
+prime_tower_wipe_enabled = True
+prime_tower_brim_enable = True