Merge branch 'main' of github.com:Ultimaker/Cura

2025-07-24 07:03:56 -06:00 · 2022-06-15 14:40:42 +02:00 · 2022-06-15 14:40:42 +02:00 · bb058d18cb
commit bb058d18cb
parent 20607b219a a82b90fd96
222 changed files with 167 additions and 538 deletions
--- a/resources/definitions/ultimaker.def.json
+++ b/resources/definitions/ultimaker.def.json
@ -213,6 +213,51 @@
        },
        "jerk_skirt_brim": {
            "minimum_value_warning": 20
+        },
+        "support_wall_count": {
+            "value": "1 if support_structure == 'tree' else 0"
+        },
+        "zig_zaggify_support": {
+            "value": true
+        },
+        "support_infill_rate": {
+            "value": "80 if gradual_support_infill_steps != 0 else 15"
+        },
+        "gradual_support_infill_steps": {
+            "value": "2 if support_interface_enable else 0"
+        },
+        "gradual_support_infill_step_height": {
+            "value": "4*layer_height"
+        },
+        "support_interface_height": {
+            "value": "2*layer_height"
+        },
+        "support_offset": {
+            "value": "2*line_width if support_interface_enable else 0"
+        },
+        "support_xy_distance": {
+            "value": "1"
+        },
+        "support_xy_distance_overhang": {
+            "value": "wall_line_width_0"
+        },
+        "minimum_support_area": {
+            "value": "(2 + support_offset)**2"
+        },
+        "support_interface_skip_height": {
+            "value": "layer_height"
+        },
+        "support_interface_pattern": {
+            "value": "'concentric'"
+        },
+        "support_interface_offset": {
+            "value": "support_offset"
+        },
+        "support_use_towers": {
+            "value": false
+        },
+        "support_z_distance": {
+            "value": "0"
        }
    }
 }
--- a/resources/definitions/ultimaker2.def.json
+++ b/resources/definitions/ultimaker2.def.json
@ -86,6 +86,9 @@
        },
        "machine_acceleration": {
            "default_value": 3000
+        },
+        "support_z_distance": {
+            "value": "0.1"
        }
    }
 }
--- a/resources/definitions/ultimaker3.def.json
+++ b/resources/definitions/ultimaker3.def.json
@ -139,11 +139,6 @@
        "speed_wall_0": { "value": "math.ceil(speed_wall * 20 / 30)" },
        "speed_wall_x": { "value": "speed_wall" },
        "support_angle": { "value": "45" },
-        "support_pattern": { "value": "'triangles'" },
-        "support_use_towers": { "value": "False" },
-        "support_xy_distance": { "value": "wall_line_width_0 * 2.5" },
-        "support_xy_distance_overhang": { "value": "wall_line_width_0" },
-        "support_z_distance": { "value": "0" },
        "switch_extruder_prime_speed": { "value": "15" },
        "switch_extruder_retraction_amount": { "value": "8" },
        "top_bottom_thickness": { "value": "1" },
--- a/resources/definitions/ultimaker_s3.def.json
+++ b/resources/definitions/ultimaker_s3.def.json
@ -131,11 +131,6 @@
        "speed_wall_0": { "value": "math.ceil(speed_wall * 20 / 30)" },
        "speed_wall_x": { "value": "speed_wall" },
        "support_angle": { "value": "45" },
-        "support_pattern": { "value": "'triangles'" },
-        "support_use_towers": { "value": "False" },
-        "support_xy_distance": { "value": "wall_line_width_0 * 2.5" },
-        "support_xy_distance_overhang": { "value": "wall_line_width_0" },
-        "support_z_distance": { "value": "0" },
        "switch_extruder_prime_speed": { "value": "15" },
        "switch_extruder_retraction_amount": { "value": "8" },
        "top_bottom_thickness": { "value": "1" },
--- a/resources/definitions/ultimaker_s5.def.json
+++ b/resources/definitions/ultimaker_s5.def.json
@ -133,11 +133,6 @@
        "speed_wall_0": { "value": "math.ceil(speed_wall * 20 / 30)" },
        "speed_wall_x": { "value": "speed_wall" },
        "support_angle": { "value": "45" },
-        "support_pattern": { "value": "'triangles'" },
-        "support_use_towers": { "value": "False" },
-        "support_xy_distance": { "value": "wall_line_width_0 * 2.5" },
-        "support_xy_distance_overhang": { "value": "wall_line_width_0" },
-        "support_z_distance": { "value": "0" },
        "switch_extruder_prime_speed": { "value": "15" },
        "switch_extruder_retraction_amount": { "value": "8" },
        "top_bottom_thickness": { "value": "1" },
--- a/resources/quality/ultimaker2_plus/um2p_cpep_0.4_draft.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_cpep_0.4_draft.inst.cfg
@ -34,7 +34,5 @@ speed_wall_0 = =math.ceil(speed_print * 20 / 25)
 speed_wall_x = =speed_print
 support_angle = 45
 support_enable = True
-support_infill_rate = =20 if support_enable and support_structure == 'normal' else 0 if support_enable and support_structure == 'tree' else 20
-support_pattern = lines
 support_z_distance = 0.26
 top_bottom_thickness = 1.5
--- a/resources/quality/ultimaker2_plus/um2p_cpep_0.4_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_cpep_0.4_normal.inst.cfg
@ -34,7 +34,5 @@ speed_wall_0 = =math.ceil(speed_print * 20 / 35)
 speed_wall_x = =math.ceil(speed_print * 30 / 35)
 support_angle = 45
 support_enable = True
-support_infill_rate = =20 if support_enable and support_structure == 'normal' else 0 if support_enable and support_structure == 'tree' else 20
-support_pattern = lines
 support_z_distance = 0.26
 top_bottom_thickness = 1.5
--- a/resources/quality/ultimaker2_plus/um2p_cpep_0.6_draft.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_cpep_0.6_draft.inst.cfg
@ -37,9 +37,5 @@ speed_wall_0 = =math.ceil(speed_print * 20 / 25)
 speed_wall_x = =speed_print
 support_angle = 45
 support_enable = True
-support_infill_rate = =20 if support_enable and support_structure == 'normal' else 0 if support_enable and support_structure == 'tree' else 20
-support_line_distance = 2.85
-support_pattern = lines
-support_xy_distance = 0.6
 support_z_distance = 0.22
 top_bottom_thickness = 0.75
--- a/resources/quality/ultimaker2_plus/um2p_cpep_0.6_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_cpep_0.6_normal.inst.cfg
@ -37,9 +37,5 @@ speed_wall_0 = =math.ceil(speed_print * 30 / 35)
 speed_wall_x = =speed_print
 support_angle = 45
 support_enable = True
-support_infill_rate = =20 if support_enable and support_structure == 'normal' else 0 if support_enable and support_structure == 'tree' else 20
-support_line_distance = 2.85
-support_pattern = lines
-support_xy_distance = 0.6
 support_z_distance = 0.22
 top_bottom_thickness = 0.75
--- a/resources/quality/ultimaker2_plus/um2p_cpep_0.8_draft.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_cpep_0.8_draft.inst.cfg
@ -34,7 +34,5 @@ speed_wall_0 = =math.ceil(speed_print * 20 / 25)
 speed_wall_x = =speed_print
 support_angle = 45
 support_enable = True
-support_infill_rate = =20 if support_enable and support_structure == 'normal' else 0 if support_enable and support_structure == 'tree' else 20
-support_pattern = lines
 support_z_distance = 0.26
 top_bottom_thickness = 1.2
--- a/resources/quality/ultimaker2_plus/um2p_cpep_0.8_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_cpep_0.8_normal.inst.cfg
@ -34,7 +34,5 @@ speed_wall_0 = =math.ceil(speed_print * 20 / 30)
 speed_wall_x = =speed_print
 support_angle = 45
 support_enable = True
-support_infill_rate = =20 if support_enable and support_structure == 'normal' else 0 if support_enable and support_structure == 'tree' else 20
-support_pattern = lines
 support_z_distance = 0.26
 top_bottom_thickness = 1.2
--- a/resources/quality/ultimaker2_plus/um2p_nylon_0.25_high.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_nylon_0.25_high.inst.cfg
@ -35,9 +35,6 @@ speed_travel = 150
 speed_wall_0 = =math.ceil(speed_print * 20 / 40)
 speed_wall_x = =speed_print
 support_enable = True
-support_infill_rate = =20 if support_enable and support_structure == 'normal' else 0 if support_enable and support_structure == 'tree' else 20
-support_pattern = lines
-support_xy_distance = 0.6
 support_z_distance = =layer_height * 2
 top_bottom_thickness = 1.2
 speed_infill = =math.ceil(speed_print * 40 / 40)
--- a/resources/quality/ultimaker2_plus/um2p_nylon_0.25_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_nylon_0.25_normal.inst.cfg
@ -35,8 +35,5 @@ speed_travel = 150
 speed_wall_0 = =math.ceil(speed_print * 20 / 40)
 speed_wall_x = =speed_print
 support_enable = True
-support_infill_rate = =20 if support_enable and support_structure == 'normal' else 0 if support_enable and support_structure == 'tree' else 20
-support_pattern = lines
-support_xy_distance = 0.6
 support_z_distance = =layer_height * 2
 top_bottom_thickness = 1.2
--- a/resources/quality/ultimaker2_plus/um2p_nylon_0.4_fast.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_nylon_0.4_fast.inst.cfg
@ -34,9 +34,6 @@ speed_travel = 150
 speed_wall = =math.ceil(speed_print * 40 / 45)
 support_angle = 45
 support_enable = True
-support_infill_rate = =25 if support_enable and support_structure == 'normal' else 0 if support_enable and support_structure == 'tree' else 25
-support_pattern = lines
-support_xy_distance = 0.6
 support_z_distance = =layer_height * 2
 top_bottom_thickness = 0.75
 speed_wall_0 = =math.ceil(speed_print * 30 / 45)
--- a/resources/quality/ultimaker2_plus/um2p_nylon_0.4_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_nylon_0.4_normal.inst.cfg
@ -33,8 +33,5 @@ speed_travel = 150
 speed_wall = =math.ceil(speed_print * 40 / 45)
 support_angle = 45
 support_enable = True
-support_infill_rate = =25 if support_enable and support_structure == 'normal' else 0 if support_enable and support_structure == 'tree' else 25
-support_pattern = lines
-support_xy_distance = 0.6
 support_z_distance = =layer_height * 2
 top_bottom_thickness = 0.75
--- a/resources/quality/ultimaker2_plus/um2p_nylon_0.6_fast.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_nylon_0.6_fast.inst.cfg
@ -36,12 +36,7 @@ speed_travel = 150
 speed_wall_0 = =math.ceil(speed_print * 15 / 55)
 speed_wall_x = =math.ceil(speed_print * 40 / 55)
 support_angle = 45
-support_bottom_distance = 0.55
 support_enable = True
-support_infill_rate = =25 if support_enable and support_structure == 'normal' else 0 if support_enable and support_structure == 'tree' else 25
-support_pattern = lines
-support_top_distance = 0.55
-support_xy_distance = 0.7
-support_z_distance = =layer_height * 2
+support_z_distance = 0.55
 top_bottom_thickness = 1.2
 speed_infill = =math.ceil(speed_print * 55 / 55)
--- a/resources/quality/ultimaker2_plus/um2p_nylon_0.6_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_nylon_0.6_normal.inst.cfg
@ -37,8 +37,5 @@ speed_wall_0 = =math.ceil(speed_print * 15 / 55)
 speed_wall_x = =math.ceil(speed_print * 40 / 55)
 support_angle = 45
 support_enable = True
-support_infill_rate = =25 if support_enable and support_structure == 'normal' else 0 if support_enable and support_structure == 'tree' else 25
-support_pattern = lines
-support_xy_distance = 0.7
 support_z_distance = =layer_height * 2
 top_bottom_thickness = 1.2
--- a/resources/quality/ultimaker2_plus/um2p_nylon_0.8_draft.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_nylon_0.8_draft.inst.cfg
@ -35,11 +35,7 @@ speed_travel = 150
 speed_wall_0 = =math.ceil(speed_print * 15 / 55)
 speed_wall_x = =math.ceil(speed_print * 40 / 55)
 support_angle = 45
-support_bottom_distance = 0.65
 support_enable = True
-support_infill_rate = =25 if support_enable and support_structure == 'normal' else 0 if support_enable and support_structure == 'tree' else 25
-support_pattern = lines
-support_top_distance = 0.5
-support_xy_distance = 0.75
-support_z_distance = =layer_height * 2
+support_z_distance = 0.5
+support_bottom_distance = 0.65
 top_bottom_thickness = 1.2
--- a/resources/quality/ultimaker2_plus/um2p_nylon_0.8_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_nylon_0.8_normal.inst.cfg
@ -37,9 +37,6 @@ speed_wall_x = =math.ceil(speed_print * 40 / 55)
 support_angle = 45
 support_bottom_distance = 0.65
 support_enable = True
-support_infill_rate = =25 if support_enable and support_structure == 'normal' else 0 if support_enable and support_structure == 'tree' else 25
-support_pattern = lines
 support_top_distance = 0.5
-support_xy_distance = 0.75
 support_z_distance = =layer_height * 2
 top_bottom_thickness = 1.2
--- a/resources/quality/ultimaker2_plus/um2p_pc_0.25_high.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_pc_0.25_high.inst.cfg
@ -31,8 +31,6 @@ raft_surface_line_width = 0.2
 speed_layer_0 = =round(speed_print * 30 / 30)
 speed_print = 30
 support_enable = True
-support_infill_rate = =20 if support_enable and support_structure == 'normal' else 0 if support_enable and support_structure == 'tree' else 20
-support_pattern = lines
 support_z_distance = 0.19
 speed_topbottom = =math.ceil(speed_print * 15 / 30)
 speed_infill = =math.ceil(speed_print * 80 / 30)
--- a/resources/quality/ultimaker2_plus/um2p_pc_0.25_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_pc_0.25_normal.inst.cfg
@ -31,6 +31,4 @@ raft_surface_line_width = 0.2
 speed_layer_0 = =round(speed_print * 30 / 30)
 speed_print = 30
 support_enable = True
-support_infill_rate = =20 if support_enable and support_structure == 'normal' else 0 if support_enable and support_structure == 'tree' else 20
-support_pattern = lines
 support_z_distance = 0.19
--- a/resources/quality/ultimaker2_plus/um2p_pc_0.4_fast.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_pc_0.4_fast.inst.cfg
@ -32,8 +32,6 @@ speed_wall_0 = =math.ceil(speed_print * 20 / 45)
 speed_wall_x = =math.ceil(speed_print * 30 / 45)
 support_angle = 45
 support_enable = True
-support_infill_rate = =20 if support_enable and support_structure == 'normal' else 0 if support_enable and support_structure == 'tree' else 20
-support_pattern = lines
 support_z_distance = 0.19
 speed_topbottom = =math.ceil(speed_print * 30 / 45)
 speed_infill = =math.ceil(speed_print * 45 / 45)
--- a/resources/quality/ultimaker2_plus/um2p_pc_0.4_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_pc_0.4_normal.inst.cfg
@ -32,6 +32,4 @@ speed_wall_0 = =math.ceil(speed_print * 20 / 45)
 speed_wall_x = =math.ceil(speed_print * 30 / 45)
 support_angle = 45
 support_enable = True
-support_infill_rate = =20 if support_enable and support_structure == 'normal' else 0 if support_enable and support_structure == 'tree' else 20
-support_pattern = lines
 support_z_distance = 0.19
--- a/resources/quality/ultimaker2_plus/um2p_pc_0.6_fast.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_pc_0.6_fast.inst.cfg
@ -36,9 +36,6 @@ speed_wall_0 = =math.ceil(speed_print * 30 / 45)
 speed_wall_x = =math.ceil(speed_print * 40 / 45)
 support_angle = 45
 support_enable = True
-support_infill_rate = =20 if support_enable and support_structure == 'normal' else 0 if support_enable and support_structure == 'tree' else 20
-support_line_distance = 3.5333
-support_pattern = lines
 support_z_distance = 0.21
 top_bottom_thickness = 0.75
 speed_infill = =math.ceil(speed_print * 45 / 45)
--- a/resources/quality/ultimaker2_plus/um2p_pc_0.6_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_pc_0.6_normal.inst.cfg
@ -36,8 +36,5 @@ speed_wall_0 = =math.ceil(speed_print * 30 / 45)
 speed_wall_x = =math.ceil(speed_print * 40 / 45)
 support_angle = 45
 support_enable = True
-support_infill_rate = =20 if support_enable and support_structure == 'normal' else 0 if support_enable and support_structure == 'tree' else 20
-support_line_distance = 3.5333
-support_pattern = lines
 support_z_distance = 0.21
 top_bottom_thickness = 0.75
--- a/resources/quality/ultimaker2_plus/um2p_pc_0.8_draft.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_pc_0.8_draft.inst.cfg
@ -31,7 +31,5 @@ speed_layer_0 = =round(speed_print * 30 / 40)
 speed_print = 40
 support_angle = 45
 support_enable = True
-support_infill_rate = =20 if support_enable and support_structure == 'normal' else 0 if support_enable and support_structure == 'tree' else 20
-support_pattern = lines
 support_z_distance = 0.26
 top_bottom_thickness = 2.0
--- a/resources/quality/ultimaker2_plus/um2p_pc_0.8_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_pc_0.8_normal.inst.cfg
@ -31,7 +31,5 @@ speed_layer_0 = =round(speed_print * 30 / 40)
 speed_print = 40
 support_angle = 45
 support_enable = True
-support_infill_rate = =20 if support_enable and support_structure == 'normal' else 0 if support_enable and support_structure == 'tree' else 20
-support_pattern = lines
 support_z_distance = 0.26
 top_bottom_thickness = 1.2
--- a/resources/quality/ultimaker2_plus/um2p_pp_0.4_fast.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_pp_0.4_fast.inst.cfg
@ -56,11 +56,8 @@ speed_travel_layer_0 = 50
 speed_wall = =math.ceil(speed_print * 25 / 25)
 speed_wall_0 = =math.ceil(speed_wall * 20 / 25)
 support_angle = 60
-support_bottom_distance = =support_z_distance / 2
-support_top_distance = =support_z_distance
-support_xy_distance = =wall_line_width_0 * 2.5
-support_xy_distance_overhang = =wall_line_width_0
 support_z_distance = =layer_height * 2
+support_bottom_distance = =support_z_distance / 2
 travel_avoid_distance = 3
 wall_0_inset = 0
 speed_wall_x = =math.ceil(speed_print * 25 / 25)
--- a/resources/quality/ultimaker2_plus/um2p_pp_0.4_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_pp_0.4_normal.inst.cfg
@ -47,10 +47,7 @@ speed_travel_layer_0 = 50
 speed_wall = =math.ceil(speed_print * 25 / 25)
 speed_wall_0 = =math.ceil(speed_wall * 20 / 25)
 support_angle = 60
-support_bottom_distance = =support_z_distance / 2
-support_top_distance = =support_z_distance
-support_xy_distance = =wall_line_width_0 * 2.5
-support_xy_distance_overhang = =wall_line_width_0
 support_z_distance = =layer_height * 2
+support_bottom_distance = =support_z_distance / 2
 travel_avoid_distance = 3
 wall_0_inset = 0
--- a/resources/quality/ultimaker2_plus/um2p_pp_0.6_draft.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_pp_0.6_draft.inst.cfg
@ -46,11 +46,8 @@ speed_travel_layer_0 = 50
 speed_wall = =math.ceil(speed_print * 25 / 25)
 speed_wall_0 = =math.ceil(speed_wall * 20 / 25)
 support_angle = 60
-support_bottom_distance = =support_z_distance / 2
-support_top_distance = =support_z_distance
-support_xy_distance = =wall_line_width_0 * 2.5
-support_xy_distance_overhang = =wall_line_width_0
 support_z_distance = =layer_height * 2
+support_bottom_distance = =support_z_distance / 2
 top_bottom_thickness = 1.1
 travel_avoid_distance = 3
 wall_0_inset = 0
--- a/resources/quality/ultimaker2_plus/um2p_pp_0.6_fast.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_pp_0.6_fast.inst.cfg
@ -55,11 +55,8 @@ speed_travel_layer_0 = 50
 speed_wall = =math.ceil(speed_print * 25 / 25)
 speed_wall_0 = =math.ceil(speed_wall * 20 / 25)
 support_angle = 60
-support_bottom_distance = =support_z_distance / 2
-support_top_distance = =support_z_distance
-support_xy_distance = =wall_line_width_0 * 2.5
-support_xy_distance_overhang = =wall_line_width_0
 support_z_distance = =layer_height * 2
+support_bottom_distance = =support_z_distance / 2
 top_bottom_thickness = 1.1
 travel_avoid_distance = 3
 wall_0_inset = 0
--- a/resources/quality/ultimaker2_plus/um2p_pp_0.8_draft.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_pp_0.8_draft.inst.cfg
@ -46,11 +46,8 @@ speed_travel_layer_0 = 50
 speed_wall = =math.ceil(speed_print * 25 / 25)
 speed_wall_0 = =math.ceil(speed_wall * 20 / 25)
 support_angle = 60
-support_bottom_distance = =support_z_distance / 2
-support_top_distance = =support_z_distance
-support_xy_distance = =wall_line_width_0 * 2.5
-support_xy_distance_overhang = =wall_line_width_0
 support_z_distance = =layer_height * 2
+support_bottom_distance = =support_z_distance / 2
 top_bottom_thickness = 1.5
 travel_avoid_distance = 3
 wall_0_inset = 0
--- a/resources/quality/ultimaker2_plus/um2p_pp_0.8_verydraft.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_pp_0.8_verydraft.inst.cfg
@ -55,11 +55,8 @@ speed_travel_layer_0 = 50
 speed_wall = =math.ceil(speed_print * 25 / 25)
 speed_wall_0 = =math.ceil(speed_wall * 20 / 25)
 support_angle = 60
-support_bottom_distance = =support_z_distance / 2
-support_top_distance = =support_z_distance
-support_xy_distance = =wall_line_width_0 * 2.5
-support_xy_distance_overhang = =wall_line_width_0
 support_z_distance = =layer_height * 2
+support_bottom_distance = =support_z_distance / 2
 top_bottom_thickness = 1.5
 travel_avoid_distance = 3
 wall_0_inset = 0
--- a/resources/quality/ultimaker2_plus/um2p_tpu_0.25_high.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_tpu_0.25_high.inst.cfg
@ -36,8 +36,6 @@ speed_wall_0 = =math.ceil(speed_print * 15 / 40)
 speed_wall_x = =math.ceil(speed_print * 38 / 40)
 support_angle = 45
 support_enable = True
-support_infill_rate = =25 if support_enable and support_structure == 'normal' else 0 if support_enable and support_structure == 'tree' else 25
-support_xy_distance = 0.6
 support_z_distance = =layer_height * 2
 top_bottom_thickness = 1.2
 speed_infill = =math.ceil(speed_print * 40 / 40)
--- a/resources/quality/ultimaker2_plus/um2p_tpu_0.4_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_tpu_0.4_normal.inst.cfg
@ -34,7 +34,5 @@ speed_wall_0 = =math.ceil(speed_print * 20 / 40)
 speed_wall_x = =math.ceil(speed_print * 35 / 40)
 support_angle = 45
 support_enable = True
-support_infill_rate = =25 if support_enable and support_structure == 'normal' else 0 if support_enable and support_structure == 'tree' else 25
-support_xy_distance = 0.65
 support_z_distance = =layer_height * 2
 top_bottom_thickness = 1.2
--- a/resources/quality/ultimaker2_plus/um2p_tpu_0.6_fast.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_tpu_0.6_fast.inst.cfg
@ -37,8 +37,6 @@ speed_wall_0 = =math.ceil(speed_print * 15 / 45)
 speed_wall_x = =math.ceil(speed_print * 40 / 45)
 support_angle = 45
 support_enable = True
-support_infill_rate = =25 if support_enable and support_structure == 'normal' else 0 if support_enable and support_structure == 'tree' else 25
-support_xy_distance = 0.7
 support_z_distance = =layer_height * 2
 top_bottom_thickness = 1.2
 speed_infill = =math.ceil(speed_print * 45 / 45)
--- a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_draft.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_draft.inst.cfg
@ -35,7 +35,5 @@ speed_wall_0 = =math.ceil(speed_print * 20 / 25)
 speed_wall_x = =speed_print
 support_angle = 45
 support_enable = True
-support_infill_rate = =0 if support_enable and support_structure == 'tree' else 20
-support_pattern = lines
 support_z_distance = 0.26
 top_bottom_thickness = 1.5
--- a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_normal.inst.cfg
@ -35,7 +35,5 @@ speed_wall_0 = =math.ceil(speed_print * 20 / 35)
 speed_wall_x = =math.ceil(speed_print * 30 / 35)
 support_angle = 45
 support_enable = True
-support_infill_rate = =0 if support_enable and support_structure == 'tree' else 20
-support_pattern = lines
 support_z_distance = 0.26
 top_bottom_thickness = 1.5
--- a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_draft.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_draft.inst.cfg
@ -37,9 +37,5 @@ speed_wall_0 = =math.ceil(speed_print * 20 / 25)
 speed_wall_x = =speed_print
 support_angle = 45
 support_enable = True
-support_infill_rate = =0 if support_enable and support_structure == 'tree' else 20
-support_line_distance = 2.85
-support_pattern = lines
-support_xy_distance = 0.6
 support_z_distance = 0.22
 top_bottom_thickness = 0.75
--- a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_normal.inst.cfg
@ -37,9 +37,5 @@ speed_wall_0 = =math.ceil(speed_print * 30 / 35)
 speed_wall_x = =speed_print
 support_angle = 45
 support_enable = True
-support_infill_rate = =0 if support_enable and support_structure == 'tree' else 20
-support_line_distance = 2.85
-support_pattern = lines
-support_xy_distance = 0.6
 support_z_distance = 0.22
 top_bottom_thickness = 0.75
--- a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.8_draft.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.8_draft.inst.cfg
@ -33,8 +33,6 @@ speed_wall_0 = =math.ceil(speed_print * 20 / 25)
 speed_wall_x = =speed_print
 support_angle = 45
 support_enable = True
-support_infill_rate = =0 if support_enable and support_structure == 'tree' else 20
-support_pattern = lines
 support_z_distance = 0.26
 top_bottom_thickness = 1.2
 retraction_combing_max_distance = 50
--- a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.8_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.8_normal.inst.cfg
@ -33,8 +33,6 @@ speed_wall_0 = =math.ceil(speed_print * 20 / 30)
 speed_wall_x = =speed_print
 support_angle = 45
 support_enable = True
-support_infill_rate = =0 if support_enable and support_structure == 'tree' else 20
-support_pattern = lines
 support_z_distance = 0.26
 top_bottom_thickness = 1.2
 retraction_combing_max_distance = 50
--- a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.25_high.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.25_high.inst.cfg
@ -34,9 +34,6 @@ speed_travel = 150
 speed_wall_0 = =math.ceil(speed_print * 20 / 40)
 speed_wall_x = =speed_print
 support_enable = True
-support_infill_rate = =0 if support_enable and support_structure == 'tree' else 20
-support_pattern = lines
-support_xy_distance = 0.6
 support_z_distance = =layer_height * 2
 top_bottom_thickness = 1.2
 speed_infill = =math.ceil(speed_print * 40 / 40)
--- a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.25_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.25_normal.inst.cfg
@ -34,8 +34,5 @@ speed_travel = 150
 speed_wall_0 = =math.ceil(speed_print * 20 / 40)
 speed_wall_x = =speed_print
 support_enable = True
-support_infill_rate = =0 if support_enable and support_structure == 'tree' else 20
-support_pattern = lines
-support_xy_distance = 0.6
 support_z_distance = =layer_height * 2
 top_bottom_thickness = 1.2
--- a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.4_fast.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.4_fast.inst.cfg
@ -34,9 +34,6 @@ speed_travel = 150
 speed_wall = =math.ceil(speed_print * 40 / 45)
 support_angle = 45
 support_enable = True
-support_infill_rate = =0 if support_enable and support_structure == 'tree' else 25
-support_pattern = lines
-support_xy_distance = 0.6
 support_z_distance = =layer_height * 2
 top_bottom_thickness = 0.75
 speed_wall_0 = =math.ceil(speed_print * 30 / 45)
--- a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.4_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.4_normal.inst.cfg
@ -33,8 +33,5 @@ speed_travel = 150
 speed_wall = =math.ceil(speed_print * 40 / 45)
 support_angle = 45
 support_enable = True
-support_infill_rate = =0 if support_enable and support_structure == 'tree' else 25
-support_pattern = lines
-support_xy_distance = 0.6
 support_z_distance = =layer_height * 2
 top_bottom_thickness = 0.75
--- a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.6_fast.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.6_fast.inst.cfg
@ -36,12 +36,7 @@ speed_travel = 150
 speed_wall_0 = =math.ceil(speed_print * 15 / 55)
 speed_wall_x = =math.ceil(speed_print * 40 / 55)
 support_angle = 45
-support_bottom_distance = 0.55
 support_enable = True
-support_infill_rate = =0 if support_enable and support_structure == 'tree' else 25
-support_pattern = lines
-support_top_distance = 0.55
-support_xy_distance = 0.7
-support_z_distance = =layer_height * 2
+support_z_distance = 0.55
 top_bottom_thickness = 1.2
 speed_infill = =math.ceil(speed_print * 55 / 55)
--- a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.6_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.6_normal.inst.cfg
@ -37,8 +37,5 @@ speed_wall_0 = =math.ceil(speed_print * 15 / 55)
 speed_wall_x = =math.ceil(speed_print * 40 / 55)
 support_angle = 45
 support_enable = True
-support_infill_rate = =0 if support_enable and support_structure == 'tree' else 25
-support_pattern = lines
-support_xy_distance = 0.7
 support_z_distance = =layer_height * 2
 top_bottom_thickness = 1.2
--- a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.8_draft.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.8_draft.inst.cfg
@ -34,11 +34,7 @@ speed_travel = 150
 speed_wall_0 = =math.ceil(speed_print * 15 / 55)
 speed_wall_x = =math.ceil(speed_print * 40 / 55)
 support_angle = 45
-support_bottom_distance = 0.65
 support_enable = True
-support_infill_rate = =0 if support_enable and support_structure == 'tree' else 25
-support_pattern = lines
-support_top_distance = 0.5
-support_xy_distance = 0.75
-support_z_distance = =layer_height * 2
+support_z_distance = 0.5
+support_bottom_distance = 0.65
 top_bottom_thickness = 1.2
--- a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.8_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.8_normal.inst.cfg
@ -36,9 +36,6 @@ speed_wall_x = =math.ceil(speed_print * 40 / 55)
 support_angle = 45
 support_bottom_distance = 0.65
 support_enable = True
-support_infill_rate = =0 if support_enable and support_structure == 'tree' else 25
-support_pattern = lines
 support_top_distance = 0.5
-support_xy_distance = 0.75
 support_z_distance = =layer_height * 2
 top_bottom_thickness = 1.2
--- a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.25_high.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.25_high.inst.cfg
@ -30,7 +30,5 @@ raft_surface_line_width = 0.2
 speed_layer_0 = =round(speed_print * 30 / 30)
 speed_print = 30
 support_enable = True
-support_infill_rate = =0 if support_enable and support_structure == 'tree' else 20
-support_pattern = lines
 support_z_distance = 0.19
 speed_topbottom = =math.ceil(speed_print * 15 / 30)
--- a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.25_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.25_normal.inst.cfg
@ -30,6 +30,4 @@ raft_surface_line_width = 0.2
 speed_layer_0 = =round(speed_print * 30 / 30)
 speed_print = 30
 support_enable = True
-support_infill_rate = =0 if support_enable and support_structure == 'tree' else 20
-support_pattern = lines
 support_z_distance = 0.19
--- a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.4_fast.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.4_fast.inst.cfg
@ -31,8 +31,6 @@ speed_wall_0 = =math.ceil(speed_print * 20 / 45)
 speed_wall_x = =math.ceil(speed_print * 30 / 45)
 support_angle = 45
 support_enable = True
-support_infill_rate = =0 if support_enable and support_structure == 'tree' else 20
-support_pattern = lines
 support_z_distance = 0.19
 speed_topbottom = =math.ceil(speed_print * 30 / 45)
 speed_infill = =math.ceil(speed_print * 45 / 45)
--- a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.4_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.4_normal.inst.cfg
@ -31,6 +31,4 @@ speed_wall_0 = =math.ceil(speed_print * 20 / 45)
 speed_wall_x = =math.ceil(speed_print * 30 / 45)
 support_angle = 45
 support_enable = True
-support_infill_rate = =0 if support_enable and support_structure == 'tree' else 20
-support_pattern = lines
 support_z_distance = 0.19
--- a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.6_fast.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.6_fast.inst.cfg
@ -35,9 +35,6 @@ speed_wall_0 = =math.ceil(speed_print * 30 / 45)
 speed_wall_x = =math.ceil(speed_print * 40 / 45)
 support_angle = 45
 support_enable = True
-support_infill_rate = =0 if support_enable and support_structure == 'tree' else 20
-support_line_distance = 3.5333
-support_pattern = lines
 support_z_distance = 0.21
 top_bottom_thickness = 0.75
 speed_infill = =math.ceil(speed_print * 45 / 45)
--- a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.6_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.6_normal.inst.cfg
@ -35,8 +35,5 @@ speed_wall_0 = =math.ceil(speed_print * 30 / 45)
 speed_wall_x = =math.ceil(speed_print * 40 / 45)
 support_angle = 45
 support_enable = True
-support_infill_rate = =0 if support_enable and support_structure == 'tree' else 20
-support_line_distance = 3.5333
-support_pattern = lines
 support_z_distance = 0.21
 top_bottom_thickness = 0.75
--- a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.8_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.8_normal.inst.cfg
@ -30,7 +30,5 @@ speed_layer_0 = =round(speed_print * 30 / 40)
 speed_print = 40
 support_angle = 45
 support_enable = True
-support_infill_rate = =0 if support_structure == 'tree' else 20
-support_pattern = lines
 support_z_distance = 0.26
 top_bottom_thickness = 1.2
--- a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_fast.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_fast.inst.cfg
@ -46,11 +46,8 @@ speed_travel_layer_0 = 50
 speed_wall = =math.ceil(speed_print * 25 / 25)
 speed_wall_0 = =math.ceil(speed_wall * 20 / 25)
 support_angle = 60
-support_bottom_distance = =support_z_distance / 2
-support_top_distance = =support_z_distance
-support_xy_distance = =wall_line_width_0 * 2.5
-support_xy_distance_overhang = =wall_line_width_0
 support_z_distance = =layer_height * 2
+support_bottom_distance = =support_z_distance / 2
 travel_avoid_distance = 3
 wall_0_inset = 0
 speed_wall_x = =math.ceil(speed_print * 25 / 25)
--- a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_normal.inst.cfg
@ -46,10 +46,7 @@ speed_travel_layer_0 = 50
 speed_wall = =math.ceil(speed_print * 25 / 25)
 speed_wall_0 = =math.ceil(speed_wall * 20 / 25)
 support_angle = 60
-support_bottom_distance = =support_z_distance / 2
-support_top_distance = =support_z_distance
-support_xy_distance = =wall_line_width_0 * 2.5
-support_xy_distance_overhang = =wall_line_width_0
 support_z_distance = =layer_height * 2
+support_bottom_distance = =support_z_distance / 2
 travel_avoid_distance = 3
 wall_0_inset = 0
--- a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_draft.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_draft.inst.cfg
@ -45,11 +45,8 @@ speed_travel_layer_0 = 50
 speed_wall = =math.ceil(speed_print * 25 / 25)
 speed_wall_0 = =math.ceil(speed_wall * 20 / 25)
 support_angle = 60
-support_bottom_distance = =support_z_distance / 2
-support_top_distance = =support_z_distance
-support_xy_distance = =wall_line_width_0 * 2.5
-support_xy_distance_overhang = =wall_line_width_0
 support_z_distance = =layer_height * 2
+support_bottom_distance = =support_z_distance / 2
 top_bottom_thickness = 1.1
 travel_avoid_distance = 3
 wall_0_inset = 0
--- a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_fast.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_fast.inst.cfg
@ -45,11 +45,8 @@ speed_travel_layer_0 = 50
 speed_wall = =math.ceil(speed_print * 25 / 25)
 speed_wall_0 = =math.ceil(speed_wall * 20 / 25)
 support_angle = 60
-support_bottom_distance = =support_z_distance / 2
-support_top_distance = =support_z_distance
-support_xy_distance = =wall_line_width_0 * 2.5
-support_xy_distance_overhang = =wall_line_width_0
 support_z_distance = =layer_height * 2
+support_bottom_distance = =support_z_distance / 2
 top_bottom_thickness = 1.1
 travel_avoid_distance = 3
 wall_0_inset = 0
--- a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.8_draft.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.8_draft.inst.cfg
@ -57,8 +57,6 @@ speed_wall_0 = =math.ceil(speed_wall * 20 / 25)
 support_angle = 60
 support_bottom_distance = =support_z_distance / 2
 support_top_distance = =support_z_distance
-support_xy_distance = =wall_line_width_0 * 2.5
-support_xy_distance_overhang = =wall_line_width_0
 support_z_distance = =layer_height * 2
 top_bottom_thickness = 1.5
 travel_avoid_distance = 3
--- a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.8_verydraft.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.8_verydraft.inst.cfg
@ -48,8 +48,6 @@ speed_wall_0 = =math.ceil(speed_wall * 20 / 25)
 support_angle = 60
 support_bottom_distance = =support_z_distance / 2
 support_top_distance = =support_z_distance
-support_xy_distance = =wall_line_width_0 * 2.5
-support_xy_distance_overhang = =wall_line_width_0
 support_z_distance = =layer_height * 2
 top_bottom_thickness = 1.5
 travel_avoid_distance = 3
--- a/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.25_high.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.25_high.inst.cfg
@ -36,8 +36,6 @@ speed_wall_0 = =math.ceil(speed_print * 15 / 40)
 speed_wall_x = =math.ceil(speed_print * 38 / 40)
 support_angle = 45
 support_enable = True
-support_infill_rate = =0 if support_enable and support_structure == 'tree' else 25
-support_xy_distance = 0.6
 support_z_distance = =layer_height * 2
 top_bottom_thickness = 1.2
 speed_infill = =math.ceil(speed_print * 40 / 40)
--- a/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.4_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.4_normal.inst.cfg
@ -34,7 +34,5 @@ speed_wall_0 = =math.ceil(speed_print * 20 / 40)
 speed_wall_x = =math.ceil(speed_print * 35 / 40)
 support_angle = 45
 support_enable = True
-support_infill_rate = =0 if support_enable and support_structure == 'tree' else 25
-support_xy_distance = 0.65
 support_z_distance = =layer_height * 2
 top_bottom_thickness = 1.2
--- a/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.6_fast.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.6_fast.inst.cfg
@ -37,8 +37,6 @@ speed_wall_0 = =math.ceil(speed_print * 15 / 45)
 speed_wall_x = =math.ceil(speed_print * 40 / 45)
 support_angle = 45
 support_enable = True
-support_infill_rate = =0 if support_structure == 'tree' else 25
-support_xy_distance = 0.7
 support_z_distance = =layer_height * 2
 top_bottom_thickness = 1.2
 speed_infill = =math.ceil(speed_print * 45 / 45)
--- a/resources/quality/ultimaker3/um3_aa0.25_PC_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.25_PC_Normal_Quality.inst.cfg
@ -40,9 +40,7 @@ speed_topbottom = =math.ceil(speed_print * 25 / 50)
 speed_travel = 250
 speed_wall = =math.ceil(speed_print * 40 / 50)
 speed_wall_0 = =math.ceil(speed_wall * 25 / 40)
-support_bottom_distance = =support_z_distance
 support_interface_density = 87.5
-support_interface_pattern = lines
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 35
--- a/resources/quality/ultimaker3/um3_aa0.4_BAM_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_BAM_Draft_Print.inst.cfg
@ -29,11 +29,6 @@ top_bottom_thickness = 1
 support_brim_enable = True
 support_interface_enable = True
 support_interface_density = =min(extruderValues('material_surface_energy'))
-support_interface_pattern = ='lines' if support_interface_density < 100 else 'concentric'
 support_top_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height
 support_bottom_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height
 support_angle = 45
-support_join_distance = 5
-support_offset = 2
-support_pattern = triangles
-support_infill_rate = =10 if support_enable and support_structure == 'normal' else 0 if support_enable and support_structure == 'tree' else 10
--- a/resources/quality/ultimaker3/um3_aa0.4_BAM_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_BAM_Fast_Print.inst.cfg
@ -28,11 +28,6 @@ top_bottom_thickness = 1
 support_brim_enable = True
 support_interface_enable = True
 support_interface_density = =min(extruderValues('material_surface_energy'))
-support_interface_pattern = ='lines' if support_interface_density < 100 else 'concentric'
 support_top_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 1) * layer_height
 support_bottom_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height
 support_angle = 45
-support_join_distance = 5
-support_offset = 2
-support_pattern = triangles
-support_infill_rate = =10 if support_enable and support_structure == 'normal' else 0 if support_enable and support_structure == 'tree' else 10
--- a/resources/quality/ultimaker3/um3_aa0.4_BAM_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_BAM_Normal_Quality.inst.cfg
@ -25,12 +25,7 @@ speed_layer_0 = =math.ceil(speed_print * 20 / 70)
 support_brim_enable = True
 support_interface_enable = True
 support_interface_density = =min(extruderValues('material_surface_energy'))
-support_interface_pattern = ='lines' if support_interface_density < 100 else 'concentric'
 support_top_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 1) * layer_height
 support_bottom_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height
 support_angle = 45
-support_join_distance = 5
-support_offset = 2
-support_pattern = triangles
-support_infill_rate = =10 if support_enable and support_structure == 'normal' else 0 if support_enable and support_structure == 'tree' else 10
 top_bottom_thickness = 1
--- a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Draft_Print.inst.cfg
@ -38,6 +38,5 @@ speed_topbottom = =math.ceil(speed_print * 40 / 50)
 speed_travel = 250
 speed_wall = =math.ceil(speed_print * 50 / 50)
 speed_wall_0 = =math.ceil(speed_wall * 40 / 50)
-support_bottom_distance = =support_z_distance
 support_z_distance = =layer_height
 wall_0_inset = 0
--- a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Fast_Print.inst.cfg
@ -38,6 +38,5 @@ speed_topbottom = =math.ceil(speed_print * 35 / 45)
 speed_travel = 250
 speed_wall = =math.ceil(speed_print * 45 / 45)
 speed_wall_0 = =math.ceil(speed_wall * 35 / 45)
-support_bottom_distance = =support_z_distance
 support_z_distance = =layer_height
 wall_0_inset = 0
--- a/resources/quality/ultimaker3/um3_aa0.4_CPEP_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_CPEP_High_Quality.inst.cfg
@ -40,6 +40,5 @@ speed_topbottom = =math.ceil(speed_print * 30 / 35)
 speed_travel = 250
 speed_wall = =math.ceil(speed_print * 35 / 40)
 speed_wall_0 = =math.ceil(speed_wall * 30 / 35)
-support_bottom_distance = =support_z_distance
 support_z_distance = =layer_height
 wall_0_inset = 0
--- a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Normal_Quality.inst.cfg
@ -39,6 +39,5 @@ speed_topbottom = =math.ceil(speed_print * 30 / 35)
 speed_travel = 250
 speed_wall = =math.ceil(speed_print * 35 / 40)
 speed_wall_0 = =math.ceil(speed_wall * 30 / 35)
-support_bottom_distance = =support_z_distance
 support_z_distance = =layer_height
 wall_0_inset = 0
--- a/resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg
@ -49,9 +49,7 @@ speed_topbottom = =math.ceil(speed_print * 25 / 50)
 speed_travel = 250
 speed_wall = =math.ceil(speed_print * 40 / 50)
 speed_wall_0 = =math.ceil(speed_wall * 25 / 40)
-support_bottom_distance = =support_z_distance
 support_interface_density = 87.5
-support_interface_pattern = lines
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 35
--- a/resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg
@ -47,9 +47,7 @@ speed_topbottom = =math.ceil(speed_print * 25 / 50)
 speed_travel = 250
 speed_wall = =math.ceil(speed_print * 40 / 50)
 speed_wall_0 = =math.ceil(speed_wall * 25 / 40)
-support_bottom_distance = =support_z_distance
 support_interface_density = 87.5
-support_interface_pattern = lines
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 35
--- a/resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg
@ -49,9 +49,7 @@ speed_topbottom = =math.ceil(speed_print * 25 / 50)
 speed_travel = 250
 speed_wall = =math.ceil(speed_print * 40 / 50)
 speed_wall_0 = =math.ceil(speed_wall * 25 / 40)
-support_bottom_distance = =support_z_distance
 support_interface_density = 87.5
-support_interface_pattern = lines
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 35
--- a/resources/quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg
@ -46,9 +46,7 @@ speed_topbottom = =math.ceil(speed_print * 25 / 50)
 speed_travel = 250
 speed_wall = =math.ceil(speed_print * 40 / 50)
 speed_wall_0 = =math.ceil(speed_wall * 25 / 40)
-support_bottom_distance = =support_z_distance
 support_interface_density = 87.5
-support_interface_pattern = lines
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 35
--- a/resources/quality/ultimaker3/um3_aa0.8_CPEP_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_CPEP_Fast_Print.inst.cfg
@ -30,6 +30,5 @@ speed_slowdown_layers = 15
 speed_topbottom = =math.ceil(speed_print * 35 / 50)
 speed_wall = =math.ceil(speed_print * 40 / 50)
 speed_wall_0 = =math.ceil(speed_wall * 35 / 40)
-support_bottom_distance = =support_z_distance
 support_z_distance = =layer_height
 top_bottom_thickness = 1.2
--- a/resources/quality/ultimaker3/um3_aa0.8_CPEP_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_CPEP_Superdraft_Print.inst.cfg
@ -32,6 +32,5 @@ speed_topbottom = =math.ceil(speed_print * 35 / 50)
 speed_wall = =math.ceil(speed_print * 40 / 50)
 speed_wall_0 = =math.ceil(speed_wall * 35 / 40)
 speed_infill = =math.ceil(speed_print * 40 / 50)
-support_bottom_distance = =support_z_distance
 support_z_distance = =layer_height
 top_bottom_thickness = 1.2
--- a/resources/quality/ultimaker3/um3_aa0.8_CPEP_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_CPEP_Verydraft_Print.inst.cfg
@ -32,6 +32,5 @@ speed_slowdown_layers = 10
 speed_topbottom = =math.ceil(speed_print * 35 / 50)
 speed_wall = =math.ceil(speed_print * 40 / 50)
 speed_wall_0 = =math.ceil(speed_wall * 35 / 40)
-support_bottom_distance = =support_z_distance
 support_z_distance = =layer_height
 top_bottom_thickness = 1.2
--- a/resources/quality/ultimaker3/um3_aa0.8_Nylon_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_Nylon_Draft_Print.inst.cfg
@ -26,7 +26,6 @@ raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
 raft_margin = 10
 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2)
 support_angle = 70
-support_xy_distance = =wall_line_width_0 * 1.5
 switch_extruder_prime_speed = 30
 switch_extruder_retraction_amount = 30
 switch_extruder_retraction_speeds = 40
--- a/resources/quality/ultimaker3/um3_aa0.8_Nylon_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_Nylon_Superdraft_Print.inst.cfg
@ -27,7 +27,6 @@ raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
 raft_margin = 10
 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2)
 support_angle = 70
-support_xy_distance = =wall_line_width_0 * 1.5
 switch_extruder_prime_speed = 30
 switch_extruder_retraction_amount = 30
 switch_extruder_retraction_speeds = 40
--- a/resources/quality/ultimaker3/um3_aa0.8_PLA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_PLA_Draft_Print.inst.cfg
@ -31,6 +31,4 @@ speed_wall = =math.ceil(speed_print * 40 / 45)
 speed_wall_x = =speed_wall
 speed_wall_0 = =math.ceil(speed_wall * 35 / 40)
 support_angle = 70
-support_pattern = ='triangles'
-support_xy_distance = =wall_line_width_0 * 1.5
 top_bottom_thickness = =layer_height * 4
--- a/resources/quality/ultimaker3/um3_aa0.8_PLA_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_PLA_Superdraft_Print.inst.cfg
@ -34,6 +34,4 @@ speed_wall_x = =speed_wall
 speed_wall_0 = =math.ceil(speed_wall * 35 / 40)
 speed_infill = =math.ceil(speed_print * 35 / 45)
 support_angle = 70
-support_pattern = ='triangles'
-support_xy_distance = =wall_line_width_0 * 1.5
 top_bottom_thickness = =layer_height * 4
--- a/resources/quality/ultimaker3/um3_aa0.8_PLA_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_PLA_Verydraft_Print.inst.cfg
@ -32,6 +32,4 @@ speed_wall = =math.ceil(speed_print * 40 / 45)
 speed_wall_x = =speed_wall
 speed_wall_0 = =math.ceil(speed_wall * 35 / 40)
 support_angle = 70
-support_pattern = ='triangles'
-support_xy_distance = =wall_line_width_0 * 1.5
 top_bottom_thickness = =layer_height * 4
--- a/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg
@ -33,8 +33,6 @@ retraction_min_travel = 1.5
 retraction_prime_speed = 15
 speed_travel = 300
 speed_wall_x = =math.ceil(speed_wall * 30 / 30)
-support_bottom_distance = =support_z_distance
-support_offset = =line_width
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 45
--- a/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg
@ -34,8 +34,6 @@ retraction_prime_speed = 15
 speed_travel = 300
 speed_wall_x = =math.ceil(speed_wall * 30 / 30)
 speed_infill = =math.ceil(speed_wall * 30 / 30)
-support_bottom_distance = =support_z_distance
-support_offset = =line_width
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 45
--- a/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg
@ -33,8 +33,6 @@ retraction_min_travel = 1.5
 retraction_prime_speed = 15
 speed_travel = 300
 speed_wall_x = =math.ceil(speed_wall * 30 / 30)
-support_bottom_distance = =support_z_distance
-support_offset = =line_width
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 45
--- a/resources/quality/ultimaker3/um3_aa0.8_TPLA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_TPLA_Draft_Print.inst.cfg
@ -27,5 +27,4 @@ prime_tower_enable = False
 retract_at_layer_change = False
 speed_print = 45
 support_angle = 70
-support_xy_distance = =wall_line_width_0 * 1.5
 top_bottom_thickness = =layer_height * 6
--- a/resources/quality/ultimaker3/um3_aa0.8_TPLA_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_TPLA_Superdraft_Print.inst.cfg
@ -32,5 +32,4 @@ speed_topbottom = =math.ceil(speed_print * 20 / 30)
 speed_wall = =math.ceil(speed_print * 25/ 30)
 speed_wall_0 = =math.ceil(speed_print * 20 / 30)
 support_angle = 70
-support_xy_distance = =wall_line_width_0 * 1.5
 top_bottom_thickness = =layer_height * 4
--- a/resources/quality/ultimaker3/um3_aa0.8_TPLA_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_TPLA_Verydraft_Print.inst.cfg
@ -32,6 +32,4 @@ speed_topbottom = =math.ceil(speed_print * 20 / 35)
 speed_wall = =math.ceil(speed_print * 25/ 35)
 speed_wall_0 = =math.ceil(speed_print * 20 / 35)
 support_angle = 70
-support_pattern = ='triangles'
-support_xy_distance = =wall_line_width_0 * 1.5
 top_bottom_thickness = =layer_height * 4
--- a/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg
@ -42,8 +42,6 @@ speed_travel = 300
 speed_wall = =math.ceil(speed_print * 30 / 30)
 speed_wall_x = =math.ceil(speed_wall * 30 / 30)
 support_angle = 50
-support_bottom_distance = =support_z_distance
-support_offset = =line_width
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 45
--- a/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg
@ -44,8 +44,6 @@ speed_wall = =speed_print
 speed_wall_x = =speed_print
 speed_infill = =speed_print
 support_angle = 50
-support_bottom_distance = =support_z_distance
-support_offset = =line_width
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 45
--- a/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg
@ -42,8 +42,6 @@ speed_travel = 300
 speed_wall = =math.ceil(speed_print * 30 / 30)
 speed_wall_x = =math.ceil(speed_wall * 30 / 30)
 support_angle = 50
-support_bottom_distance = =support_z_distance
-support_offset = =line_width
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 45
--- a/resources/quality/ultimaker3/um3_bb0.4_PVA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_bb0.4_PVA_Draft_Print.inst.cfg
@ -19,3 +19,7 @@ prime_tower_enable = False
 retraction_count_max = 5
 skin_overlap = 20
 support_brim_enable = True
+support_interface_enable = True
+skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width))
+cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
+support_use_towers = True
--- a/resources/quality/ultimaker3/um3_bb0.4_PVA_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_bb0.4_PVA_Fast_Print.inst.cfg
@ -19,4 +19,7 @@ prime_tower_enable = False
 retraction_count_max = 5
 skin_overlap = 15
 support_brim_enable = True
-support_infill_sparse_thickness = 0.3
+support_interface_enable = True
+skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width))
+cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
+support_use_towers = True
--- a/resources/quality/ultimaker3/um3_bb0.4_PVA_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_bb0.4_PVA_High_Quality.inst.cfg
@ -17,4 +17,7 @@ material_standby_temperature = 100
 prime_tower_enable = False
 retraction_count_max = 5
 support_brim_enable = True
-support_infill_sparse_thickness = 0.18
+support_interface_enable = True
+skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width))
+cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
+support_use_towers = True
--- a/resources/quality/ultimaker3/um3_bb0.4_PVA_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_bb0.4_PVA_Normal_Quality.inst.cfg
@ -17,3 +17,7 @@ material_standby_temperature = 100
 prime_tower_enable = False
 retraction_count_max = 5
 support_brim_enable = True
+support_interface_enable = True
+skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width))
+cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
+support_use_towers = True
--- a/resources/quality/ultimaker3/um3_bb0.8_PVA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_bb0.8_PVA_Draft_Print.inst.cfg
@ -17,3 +17,7 @@ material_print_temperature = =default_material_print_temperature + 5
 material_standby_temperature = 100
 retraction_count_max = 5
 support_brim_enable = True
+support_interface_enable = True
+skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width))
+cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
+support_use_towers = True
--- a/Show more
+++ b/Show more