diff --git a/resources/definitions/ankermake_m5.def.json b/resources/definitions/ankermake_m5.def.json
index c912ec6a8b..1d885ed379 100644
--- a/resources/definitions/ankermake_m5.def.json
+++ b/resources/definitions/ankermake_m5.def.json
@@ -19,30 +19,42 @@
 
   "overrides": {
     "machine_name": { "default_value": "AnkerMake M5" },
-    "machine_width": { "default_value": 235 },
-    "machine_height": { "default_value": 250 },
-    "machine_depth": { "default_value": 235 },
-    "machine_heated_bed": { "default_value": true },
     "material_diameter": { "default_value": 1.75 },
+    "machine_width": { "default_value": 235 },
+    "machine_depth": { "default_value": 235 },
+    "machine_height": { "default_value": 250 },
+    "machine_heated_bed": { "default_value": true },
+    "initial_layer_line_width_factor": { "value": 80 },
+    "optimize_wall_printing_order": { "value": true },
+    "infill_sparse_density": { "value": 15 },
+    "infill_overlap": { "value": 30 },
+    "material_flow_layer_0": { "value": 113 },
+    "skin_material_flow": { "value": 97.0 },
     "speed_print": { "maximum_value_warning": 300 },
     "speed_infill": { "maximum_value_warning": 300 },
-    "speed_topbottom": { "value": 150.0 },
-    "speed_travel_layer_0": { "value": 250.0 },
-    "speed_travel": { "value": "speed_travel_layer_0" },
     "speed_wall": { "value": 150.0, "maximum_value_warning": 300 },
     "speed_wall_0": { "value": 150.0, "maximum_value_warning": 300 },
     "speed_wall_x": { "value": 250.0, "maximum_value_warning": 300 },
-    "material_flow_layer_0": { "value": 120 },
-    "cool_min_layer_time": { "value": 6 },
-    "cool_min_speed": { "value": 30 },
-    "retraction_amount": { "default_value": 1.5 },
-    "retraction_speed": { "default_value": 70 },
+    "speed_topbottom": { "value": 150.0 },
+    "speed_travel": { "value": 250.0 },
+    "speed_travel_layer_0": { "value": "speed_travel" },
     "acceleration_print": { "value": "2500" },
     "acceleration_travel": { "value": "acceleration_print" },
+    "retraction_amount": { "default_value": 1.5 },
+    "retraction_speed": { "default_value": 70 },
+    "retraction_combing": { "value": "infill" },
+    "cool_min_layer_time": { "value": 6 },
+    "cool_min_speed": { "value": 30 },
     "adhesion_type": { "default_value": "skirt" },
     "raft_margin": { "default_value": 5 },
     "raft_airgap": { "default_value": 0.25 },
-    "brim_width": { "default_value": 5 },
+    "skin_overlap": { "value": 10 },
+    "skirt_line_count": { "value": 3 },
+    "small_feature_speed_factor": { "value": 80 },
+    "small_feature_speed_factor_0": { "value": 30 },
+    "small_hole_max_size": { "value": 10 },
+    "wall_overhang_angle": { "value": 55 },
+    "wall_overhang_speed_factor": { "value": 50 },
     "machine_head_with_fans_polygon": {
       "default_value": [
         [-50, 25],
diff --git a/resources/quality/ankermake_m5/ankermake_m5_draft.inst.cfg b/resources/quality/ankermake_m5/ankermake_m5_draft.inst.cfg
index 1a10b6932f..437ff2b0f2 100644
--- a/resources/quality/ankermake_m5/ankermake_m5_draft.inst.cfg
+++ b/resources/quality/ankermake_m5/ankermake_m5_draft.inst.cfg
@@ -11,40 +11,9 @@ type = quality
 weight = -2
 
 [values]
-adhesion_type = skirt
-bridge_settings_enabled = False
-brim_width = 10
-cool_min_layer_time = 6
-fill_outline_gaps = False
-hole_xy_offset = 0.15
-infill_line_distance = =0 if infill_sparse_density == 0 else (infill_line_width * 100) / infill_sparse_density * (2 if infill_pattern == 'grid' else (3 if infill_pattern == 'triangles' or infill_pattern == 'trihexagon' or infill_pattern == 'cubic' or infill_pattern == 'cubicsubdiv' else (2 if infill_pattern == 'tetrahedral' or infill_pattern == 'quarter_cubic' else (1 if infill_pattern == 'cross' or infill_pattern == 'cross_3d' else 1))))
-infill_material_flow = 100
-infill_overlap = 30
-infill_sparse_density = 15
-initial_layer_line_width_factor = 80
-jerk_enabled = False
 layer_height = 0.28
 layer_height_0 = 0.2
-material_final_print_temperature = 210
-material_flow_layer_0 = 113.0
-material_initial_print_temperature = 220
-material_print_temperature = 210
-material_print_temperature_layer_0 = 220
-optimize_wall_printing_order = True
-retraction_combing = infill
-retraction_extrusion_window = 10
-skin_angles = [ ]
-skin_line_width = =line_width
-skin_material_flow = 97.0
-skin_overlap = 10
-skirt_line_count = 3
-small_feature_speed_factor = 100
-small_feature_speed_factor_0 = 30
-small_hole_max_size = 10
-speed_layer_0 = 50
-speed_topbottom = 150
+speed_print = 250
 speed_wall_0 = 150
 speed_wall_x = 250
-wall_overhang_angle = 55
-wall_overhang_speed_factor = 30
-xy_offset_layer_0 = -0.15
\ No newline at end of file
+wall_line_count = 2
\ No newline at end of file
diff --git a/resources/quality/ankermake_m5/ankermake_m5_fine.inst.cfg b/resources/quality/ankermake_m5/ankermake_m5_fine.inst.cfg
index aa4ddae955..daf586e55d 100644
--- a/resources/quality/ankermake_m5/ankermake_m5_fine.inst.cfg
+++ b/resources/quality/ankermake_m5/ankermake_m5_fine.inst.cfg
@@ -11,43 +11,9 @@ type = quality
 weight = 1
 
 [values]
-adhesion_type = skirt
-bridge_settings_enabled = False
-brim_width = 10
-cool_min_layer_time = 6
-fill_outline_gaps = False
-hole_xy_offset = 0.15
-infill_line_distance = =0 if infill_sparse_density == 0 else (infill_line_width * 100) / infill_sparse_density * (2 if infill_pattern == 'grid' else (3 if infill_pattern == 'triangles' or infill_pattern == 'trihexagon' or infill_pattern == 'cubic' or infill_pattern == 'cubicsubdiv' else (2 if infill_pattern == 'tetrahedral' or infill_pattern == 'quarter_cubic' else (1 if infill_pattern == 'cross' or infill_pattern == 'cross_3d' else 1))))
-infill_material_flow = 100
-infill_overlap = 30
-infill_sparse_density = 15
-initial_layer_line_width_factor = 80
-jerk_enabled = False
 layer_height = 0.12
 layer_height_0 = 0.12
-material_final_print_temperature = 210
-material_flow_layer_0 = 113.0
-material_initial_print_temperature = 220
-material_print_temperature = 210
-material_print_temperature_layer_0 = 220
-optimize_wall_printing_order = True
-retraction_combing = infill
-retraction_extrusion_window = 10
-skin_angles = [ ]
-skin_line_width = =line_width
-skin_material_flow = 97
-skin_overlap = 10
-skirt_line_count = 3
-small_feature_speed_factor = 80
-small_feature_speed_factor_0 = 30
-small_hole_max_size = 10
-speed_layer_0 = 50
 speed_print = 150
-speed_topbottom = 80
 speed_wall_0 = 80
 speed_wall_x = 150
-wall_line_count = 4
-wall_overhang_angle = 55
-wall_overhang_speed_factor = 50
-xy_offset_layer_0 = -0.15
-z_seam_corner = z_seam_corner_weighted
\ No newline at end of file
+wall_line_count = 4
\ No newline at end of file
diff --git a/resources/quality/ankermake_m5/ankermake_m5_normal.inst.cfg b/resources/quality/ankermake_m5/ankermake_m5_normal.inst.cfg
index e69ac9f8c8..b94ffdc77e 100644
--- a/resources/quality/ankermake_m5/ankermake_m5_normal.inst.cfg
+++ b/resources/quality/ankermake_m5/ankermake_m5_normal.inst.cfg
@@ -11,43 +11,9 @@ type = quality
 weight = 0
 
 [values]
-adhesion_type = skirt
-bridge_settings_enabled = False
-brim_width = 10
-fill_outline_gaps = False
-hole_xy_offset = 0.15
-infill_line_distance = =0 if infill_sparse_density == 0 else (infill_line_width * 100) / infill_sparse_density * (2 if infill_pattern == 'grid' else (3 if infill_pattern == 'triangles' or infill_pattern == 'trihexagon' or infill_pattern == 'cubic' or infill_pattern == 'cubicsubdiv' else (2 if infill_pattern == 'tetrahedral' or infill_pattern == 'quarter_cubic' else (1 if infill_pattern == 'cross' or infill_pattern == 'cross_3d' else 1))))
-infill_material_flow = 100
-infill_overlap = 30
-infill_sparse_density = 15
-initial_layer_line_width_factor = 80
-jerk_enabled = False
 layer_height = 0.2
 layer_height_0 = 0.14
-material_final_print_temperature = 210
-material_flow_layer_0 = 113.0
-material_initial_print_temperature = 220
-material_print_temperature = 210
-material_print_temperature_layer_0 = 220
-optimize_wall_printing_order = True
-retraction_combing = infill
-retraction_extrusion_window = 10
-skin_angles = [ ]
-skin_line_width = =line_width
-skin_material_flow = 97.0
-skin_overlap = 10
-skirt_line_count = 3
-small_feature_speed_factor = 80
-small_feature_speed_factor_0 = 30
-small_hole_max_size = 10
-speed_layer_0 = 50
 speed_print = 200
-speed_topbottom = 110
 speed_wall_0 = 110
 speed_wall_x = 200
-wall_line_count = 3
-wall_overhang_angle = 55
-wall_overhang_speed_factor = 50
-xy_offset_layer_0 = -0.15
-z_seam_position = backleft
-z_seam_type = sharpest_corner
\ No newline at end of file
+wall_line_count = 3
\ No newline at end of file