diff --git a/resources/definitions/geeetech_M1.def.json b/resources/definitions/geeetech_M1.def.json
index 02a59eb1c0..f0ee942386 100644
--- a/resources/definitions/geeetech_M1.def.json
+++ b/resources/definitions/geeetech_M1.def.json
@@ -25,33 +25,36 @@
         "machine_name": { "default_value": "Geeetech M1" },
         "machine_start_gcode": { "default_value": "\nM104 S{material_print_temperature_layer_0} ; Set Hotend Temperature\nM190 S{material_bed_temperature_layer_0} ; Wait for Bed Temperature\nM109 S{material_print_temperature_layer_0} ; Wait for Hotend Temperature\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Main Fan\nM300 S2500 P1000 ;Play a short tune\nG1 Z0.28 ;Move Z Axis up little to prevent scratching of Heat Bed\nG92 E0 ;Reset Extruder\nG1 Y3 F2400 ;Move to start position\nG1 X75 E40 F500 ;Draw a filament line\nG92 E0 ;Reset Extruder\n;G1 E-0.2 F3000 ;Retract a little\nG1 Z2.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X70 Y3 Z0.27 F3000 ;Quickly wipe away from the filament line\nG92 E0 ;Reset Extruder" },
         "machine_width": { "default_value": 105 },
-		"retraction_amount": { "value": 1 },
-		"material_print_temperature":
+        "material_print_temperature":
         {
             "maximum_value": "250",
             "value": "200 if speed_infill <=100 else 210 if speed_infill <= 150 else 220 if speed_infill <= 200 else 230"
-		},	
-		"speed_print":
+        },
+        "retraction_amount": { "value": 1 },
+        "speed_print":
         {
             "maximum_value_warning": "200",
             "value": 120
         },
-		"speed_wall": 
-		{ 
-		   "maximum_value_warning": "200",
-            "value": 80		   
-		},
-        "speed_wall_0": 
-		{ "maximum_value_warning": "200",
-            "value": 50 
-		},
-        "speed_wall_x": 
-		{ "maximum_value_warning": "200",
-            "value": 80 
-		},
-		"speed_topbottom": 
-		{ "maximum_value_warning": "200",
-            "value": 60 
-		}
+        "speed_topbottom":
+        {
+            "maximum_value_warning": "200",
+            "value": 60
+        },
+        "speed_wall":
+        {
+            "maximum_value_warning": "200",
+            "value": 80
+        },
+        "speed_wall_0":
+        {
+            "maximum_value_warning": "200",
+            "value": 50
+        },
+        "speed_wall_x":
+        {
+            "maximum_value_warning": "200",
+            "value": 80
+        }
     }
 }
\ No newline at end of file