3D-printing/Cura
1
0
Fork 0
mirror of https://github.com/Ultimaker/Cura.git synced 2025-12-05 16:51:12 -07:00
Code Issues Projects Releases Packages Wiki Activity Actions 2

Merge branch '2.3' of github.com:Ultimaker/Cura into 2.3

Browse source
This commit is contained in:
Ghostkeeper 2016-09-09 10:57:51 +02:00
commit b5eb7916c7
No known key found for this signature in database
GPG key ID: 701948C5954A7385
60 changed files with 171 additions and 1536 deletions
Download patch file Download diff file Expand all files Collapse all files

26
resources/definitions/fdmprinter.def.json
View file

@ -2478,19 +2478,6 @@
"enabled": "support_enable",
"settable_per_mesh": true
},
"support_area_smoothing":
{
"label": "Support Area Smoothing",
"description": "Maximum distance in the X/Y directions of a line segment which is to be smoothed out. Ragged lines are introduced by the join distance and support bridge, which cause the machine to resonate. Smoothing the support areas won't cause them to break with the constraints, except it might change the overhang.",
"unit": "mm",
"type": "float",
"default_value": 0.6,
"global_inherits_stack": "support_extruder_nr",
"minimum_value": "0",
"maximum_value_warning": "1.0",
"enabled": "support_enable",
"settable_per_mesh": true
},
"support_interface_enable":
{
"label": "Enable Support Interface",
@ -2546,6 +2533,19 @@
}
}
},
"support_interface_skip_height":
{
"label": "Support Interface Resolution",
"description": "When checking where there's model above the support, take steps of the given height. Lower values will slice slower, while higher values may cause normal support to be printed in some places where there should have been support interface.",
"unit": "mm",
"type": "float",
"default_value": 0.3,
"minimum_value": "0",
"global_inherits_stack": "support_extruder_nr",
"maximum_value_warning": "support_interface_height",
"enabled": "extruderValue(support_extruder_nr, 'support_interface_enable') and support_enable",
"settable_per_mesh": true
},
"support_interface_density":
{
"label": "Support Interface Density",

10
resources/definitions/ultimaker2_extended_plus.def.json
View file

@ -7,6 +7,7 @@
"author": "Ultimaker",
"manufacturer": "Ultimaker",
"category": "Ultimaker",
"quality_definition": "ultimaker2_plus",
"weight": 2,
"file_formats": "text/x-gcode",
"platform": "ultimaker2_platform.obj",
@ -17,15 +18,6 @@
"overrides": {
"machine_height": {
"default_value": 305
},
"machine_show_variants": {
"default_value": true
},
"machine_nozzle_head_distance": {
"default_value": 5
},
"machine_nozzle_expansion_angle": {
"default_value": 45
}
}
}

4
resources/qml/Menus/MaterialMenu.qml
View file

@ -106,10 +106,10 @@ Menu
var result = { "type": "material" };
if(Cura.MachineManager.filterMaterialsByMachine)
{
result.definition = Cura.MachineManager.activeDefinitionId;
result.definition = Cura.MachineManager.activeQualityDefinitionId;
if(Cura.MachineManager.hasVariants)
{
result.variant = Cura.MachineManager.activeVariantId;
result.variant = Cura.MachineManager.activeQualityVariantId;
}
}
else

4
resources/qml/Menus/ProfileMenu.qml
View file

@ -38,7 +38,7 @@ Menu
id: customProfileInstantiator
model: UM.InstanceContainersModel
{
filter: { "type": "quality_changes", "extruder": null, "definition": Cura.MachineManager.filterQualityByMachine ? Cura.MachineManager.activeDefinitionId : "fdmprinter" };
filter: { "type": "quality_changes", "extruder": null, "definition": Cura.MachineManager.filterQualityByMachine ? Cura.MachineManager.activeQualityDefinitionId : "fdmprinter" };
onModelReset: customSeparator.visible = rowCount() > 0
}
@ -79,7 +79,7 @@ Menu
if(Cura.MachineManager.filterQualityByMachine)
{
result.definition = Cura.MachineManager.activeDefinitionId;
result.definition = Cura.MachineManager.activeQualityDefinitionId;
if(Cura.MachineManager.hasMaterials)
{
result.material = Cura.MachineManager.activeQualityMaterialId;

18
resources/qml/Preferences/MaterialsPage.qml
View file

@ -129,7 +129,6 @@ UM.ManagementPage
enabled: base.currentItem != null && base.currentItem.id != Cura.MachineManager.activeMaterialId
onClicked: Cura.MachineManager.setActiveMaterial(base.currentItem.id)
},
/* // apparently visible does not work on OS X
Button
{
text: catalog.i18nc("@action:button", "Duplicate");
@ -137,24 +136,17 @@ UM.ManagementPage
enabled: base.currentItem != null
onClicked:
{
var material_id = Cura.ContainerManager.duplicateContainer(base.currentItem.id)
var base_file = Cura.ContainerManager.getContainerMetaDataEntry(base.currentItem.id, "base_file")
// We need to copy the base container instead of the specific variant.
var material_id = base_file == "" ? Cura.ContainerManager.duplicateMaterial(base.currentItem.id): Cura.ContainerManager.duplicateMaterial(base_file)
if(material_id == "")
{
return
}
if(Cura.MachineManager.filterQualityByMachine)
{
var quality_id = Cura.ContainerManager.duplicateContainer(Cura.MachineManager.activeQualityId)
Cura.ContainerManager.setContainerMetaDataEntry(quality_id, "material", material_id)
Cura.MachineManager.setActiveQuality(quality_id)
}
Cura.MachineManager.setActiveMaterial(material_id)
}
visible: false;
},
*/
Button
{
text: catalog.i18nc("@action:button", "Remove");
@ -162,15 +154,13 @@ UM.ManagementPage
enabled: base.currentItem != null && !base.currentItem.readOnly && !Cura.ContainerManager.isContainerUsed(base.currentItem.id)
onClicked: confirmDialog.open()
},
/* // apparently visible does not work on OS X
Button
{
text: catalog.i18nc("@action:button", "Import");
iconName: "document-import";
onClicked: importDialog.open();
visible: false;
visible: true;
},
*/
Button
{
text: catalog.i18nc("@action:button", "Export")

2
resources/qml/Preferences/ProfilesPage.qml
View file

@ -23,7 +23,7 @@ UM.ManagementPage
var result = { "type": "quality*", "extruder": null };
if(Cura.MachineManager.filterQualityByMachine)
{
result.definition = Cura.MachineManager.activeDefinitionId;
result.definition = Cura.MachineManager.activeQualityDefinitionId;
if(Cura.MachineManager.hasMaterials)
{
result.material = Cura.MachineManager.allActiveMaterialIds[Cura.MachineManager.activeMachineId];

2
resources/qml/Settings/SettingItem.qml
View file

@ -138,7 +138,7 @@ Item {
{
id: linkedSettingIcon;
visible: Cura.MachineManager.activeStackId != Cura.MachineManager.activeMachineId && !definition.settable_per_extruder && base.showLinkedSettingIcon
visible: Cura.MachineManager.activeStackId != Cura.MachineManager.activeMachineId && (!definition.settable_per_extruder || definition.global_inherits_stack != "-1") && base.showLinkedSettingIcon
height: parent.height;
width: height;

23
resources/quality/ultimaker2_extended_plus/um2ep_abs_0.25_normal.inst.cfg
View file

@ -1,23 +0,0 @@
[general]
version = 2
name = High Quality
definition = ultimaker2_extended_plus
[metadata]
type = quality
material = generic_abs_ultimaker2_extended_plus_0.25_mm
weight = -2
quality_type = high
[values]
layer_height = 0.06
wall_thickness = 0.88
top_bottom_thickness = 0.72
infill_sparse_density = 22
speed_print = 30
cool_min_layer_time = 3
cool_fan_speed_min = 20
cool_min_speed = 10
cool_min_layer_time_fan_speed_max = 15

26
resources/quality/ultimaker2_extended_plus/um2ep_abs_0.4_fast.inst.cfg
View file

@ -1,26 +0,0 @@
[general]
version = 2
name = Fast Print
definition = ultimaker2_extended_plus
[metadata]
type = quality
material = generic_abs_ultimaker2_extended_plus_0.4_mm
weight = -1
quality_type = fast
[values]
layer_height = 0.15
wall_thickness = 0.7
top_bottom_thickness = 0.75
infill_sparse_density = 18
speed_print = 55
speed_wall = 40
speed_topbottom = 30
speed_travel = 150
speed_layer_0 = 30
cool_min_layer_time = 3
cool_fan_speed_min = 20
cool_min_speed = 10
cool_min_layer_time_fan_speed_max = 15

23
resources/quality/ultimaker2_extended_plus/um2ep_abs_0.4_high.inst.cfg
View file

@ -1,23 +0,0 @@
[general]
version = 2
name = High Quality
definition = ultimaker2_extended_plus
[metadata]
type = quality
material = generic_abs_ultimaker2_extended_plus_0.4_mm
weight = -3
quality_type = high
[values]
layer_height = 0.06
wall_thickness = 1.05
top_bottom_thickness = 0.72
infill_sparse_density = 22
speed_print = 45
speed_wall = 30
cool_min_layer_time = 3
cool_fan_speed_min = 20
cool_min_speed = 10
cool_min_layer_time_fan_speed_max = 15

22
resources/quality/ultimaker2_extended_plus/um2ep_abs_0.4_normal.inst.cfg
View file

@ -1,22 +0,0 @@
[general]
version = 2
name = Normal Quality
definition = ultimaker2_extended_plus
[metadata]
type = quality
material = generic_abs_ultimaker2_extended_plus_0.4_mm
weight = -2
quality_type = normal
[values]
layer_height = 0.1
wall_thickness = 1.05
top_bottom_thickness = 0.8
infill_sparse_density = 20
speed_print = 45
speed_wall = 30
cool_min_layer_time = 3
cool_fan_speed_min = 20
cool_min_speed = 10
cool_min_layer_time_fan_speed_max = 15

24
resources/quality/ultimaker2_extended_plus/um2ep_abs_0.6_normal.inst.cfg
View file

@ -1,24 +0,0 @@
[general]
version = 2
name = Normal Quality
definition = ultimaker2_extended_plus
[metadata]
type = quality
material = generic_abs_ultimaker2_extended_plus_0.6_mm
weight = -2
quality_type = normal
[values]
layer_height = 0.15
wall_thickness = 1.59
top_bottom_thickness = 1.2
infill_sparse_density = 20
speed_print = 40
speed_infill = 55
cool_min_layer_time = 3
cool_fan_speed_min = 50
cool_min_speed = 20
cool_min_layer_time_fan_speed_max = 20

22
resources/quality/ultimaker2_extended_plus/um2ep_abs_0.8_normal.inst.cfg
View file

@ -1,22 +0,0 @@
[general]
version = 2
name = Fast Print
definition = ultimaker2_extended_plus
[metadata]
type = quality
material = generic_abs_ultimaker2_extended_plus_0.8_mm
weight = -2
quality_type = fast
[values]
layer_height = 0.2
wall_thickness = 2.1
top_bottom_thickness = 1.2
infill_sparse_density = 20
speed_print = 40
cool_min_layer_time = 3
cool_fan_speed_min = 50
cool_min_speed = 15
cool_min_layer_time_fan_speed_max = 25

22
resources/quality/ultimaker2_extended_plus/um2ep_cpe_0.25_normal.inst.cfg
View file

@ -1,22 +0,0 @@
[general]
version = 2
name = High Quality
definition = ultimaker2_extended_plus
[metadata]
type = quality
material = generic_cpe_ultimaker2_extended_plus_0.25_mm
weight = -2
quality_type = high
[values]
layer_height = 0.06
wall_thickness = 0.88
top_bottom_thickness = 0.72
infill_sparse_density = 22
speed_print = 30
cool_min_layer_time = 2
cool_fan_speed_min = 20
cool_min_speed = 15
cool_min_layer_time_fan_speed_max = 15

26
resources/quality/ultimaker2_extended_plus/um2ep_cpe_0.4_fast.inst.cfg
View file

@ -1,26 +0,0 @@
[general]
version = 2
name = Fast Print
definition = ultimaker2_extended_plus
[metadata]
type = quality
material = generic_cpe_ultimaker2_extended_plus_0.4_mm
weight = -1
quality_type = fast
[values]
layer_height = 0.15
wall_thickness = 0.7
top_bottom_thickness = 0.75
infill_sparse_density = 18
speed_print = 45
speed_wall = 40
speed_travel = 150
speed_layer_0 = 30
cool_min_layer_time = 3
cool_fan_speed_min = 80
cool_min_speed = 10
cool_min_layer_time_fan_speed_max = 15

22
resources/quality/ultimaker2_extended_plus/um2ep_cpe_0.4_high.inst.cfg
View file

@ -1,22 +0,0 @@
[general]
version = 2
name = High Quality
definition = ultimaker2_extended_plus
[metadata]
type = quality
material = generic_cpe_ultimaker2_extended_plus_0.4_mm
weight = -3
quality_type = high
[values]
layer_height = 0.06
wall_thickness = 1.05
top_bottom_thickness = 0.72
infill_sparse_density = 22
speed_print = 45
speed_wall = 30
cool_min_layer_time = 2
cool_fan_speed_min = 80
cool_min_speed = 15
cool_min_layer_time_fan_speed_max = 15

23
resources/quality/ultimaker2_extended_plus/um2ep_cpe_0.4_normal.inst.cfg
View file

@ -1,23 +0,0 @@
[general]
version = 2
name = Normal Quality
definition = ultimaker2_extended_plus
[metadata]
type = quality
material = generic_cpe_ultimaker2_extended_plus_0.4_mm
weight = -2
quality_type = normal
[values]
layer_height = 0.1
wall_thickness = 1.05
top_bottom_thickness = 0.8
infill_sparse_density = 20
speed_print = 45
speed_wall = 30
cool_min_layer_time = 3
cool_fan_speed_min = 80
cool_min_speed = 10
cool_min_layer_time_fan_speed_max = 15

21
resources/quality/ultimaker2_extended_plus/um2ep_cpe_0.6_normal.inst.cfg
View file

@ -1,21 +0,0 @@
[general]
version = 2
name = Normal Quality
definition = ultimaker2_extended_plus
[metadata]
type = quality
material = generic_cpe_ultimaker2_extended_plus_0.6_mm
weight = -2
quality_type = normal
[values]
layer_height = 0.15
wall_thickness = 1.59
top_bottom_thickness = 1.2
infill_sparse_density = 20
speed_print = 40
cool_min_layer_time = 5
cool_fan_speed_min = 80
cool_min_speed = 8
cool_min_layer_time_fan_speed_max = 20

21
resources/quality/ultimaker2_extended_plus/um2ep_cpe_0.8_normal.inst.cfg
View file

@ -1,21 +0,0 @@
[general]
version = 2
name = Fast Print
definition = ultimaker2_extended_plus
[metadata]
type = quality
material = generic_cpe_ultimaker2_extended_plus_0.8_mm
weight = -2
quality_type = fast
[values]
layer_height = 0.2
wall_thickness = 2.1
top_bottom_thickness = 1.2
infill_sparse_density = 20
speed_print = 40
cool_min_layer_time = 3
cool_fan_speed_min = 80
cool_min_speed = 8
cool_min_layer_time_fan_speed_max = 25

42
resources/quality/ultimaker2_extended_plus/um2ep_cpep_0.4_draft.inst.cfg
View file

@ -1,42 +0,0 @@
[general]
version = 2
name = Draft Print
definition = ultimaker2_extended_plus
[metadata]
type = quality
material = generic_cpe_plus_ultimaker2_extended_plus_0.4_mm
weight = 0
quality_type = draft
[values]
speed_wall_x = 25
support_z_distance = 0.26
raft_interface_line_spacing = 1
cool_min_speed = 8
cool_fan_speed = 50
wall_thickness = 1.14
raft_margin = 15
speed_layer_0 = 15
raft_airgap = 0.37
infill_overlap = 5
layer_height = 0.2
raft_interface_line_width = 0.8
top_bottom_thickness = 1.5
cool_fan_speed_min = 25
raft_surface_line_width = 0.38
support_pattern = lines
support_infill_rate = 20
speed_topbottom = 20
support_enable = True
speed_wall_0 = 20
adhesion_type = raft
infill_sparse_density = 30
layer_0_z_overlap = 0.22
cool_min_layer_time = 3
speed_print = 25
line_width = 0.38
support_angle = 45
raft_base_line_spacing = 1.6
raft_base_line_width = 0.8

42
resources/quality/ultimaker2_extended_plus/um2ep_cpep_0.4_normal.inst.cfg
View file

@ -1,42 +0,0 @@
[general]
version = 2
name = Normal Quality
definition = ultimaker2_extended_plus
[metadata]
type = quality
material = generic_cpe_plus_ultimaker2_extended_plus_0.4_mm
weight = 0
quality_type = normal
[values]
speed_wall_x = 30
support_z_distance = 0.26
raft_interface_line_spacing = 1
cool_min_speed = 8
cool_fan_speed = 50
wall_thickness = 1.14
raft_margin = 15
speed_layer_0 = 15
raft_airgap = 0.37
infill_overlap = 5
layer_height = 0.15
raft_interface_line_width = 0.8
top_bottom_thickness = 1.5
cool_fan_speed_min = 25
raft_surface_line_width = 0.38
support_pattern = lines
support_infill_rate = 20
speed_topbottom = 20
support_enable = True
speed_wall_0 = 20
adhesion_type = raft
infill_sparse_density = 30
layer_0_z_overlap = 0.22
cool_min_layer_time = 3
speed_print = 35
line_width = 0.38
support_angle = 45
raft_base_line_spacing = 1.6
raft_base_line_width = 0.8

46
resources/quality/ultimaker2_extended_plus/um2ep_cpep_0.6_draft.inst.cfg
View file

@ -1,46 +0,0 @@
[general]
version = 2
name = Draft Print
definition = ultimaker2_extended_plus
[metadata]
type = quality
material = generic_cpe_plus_ultimaker2_extended_plus_0.6_mm
weight = 0
quality_type = draft
[values]
support_xy_distance = 0.6
speed_travel = 150
support_z_distance = 0.22
speed_wall_x = 25
cool_min_speed = 8
cool_fan_speed = 45
raft_surface_thickness = 0.2
raft_surface_line_width = 0.57
raft_interface_line_spacing = 1.4
raft_margin = 15
speed_layer_0 = 30
raft_airgap = 0.37
infill_overlap = 5
layer_height = 0.3
raft_base_line_spacing = 2.4
raft_interface_line_width = 1.2
speed_wall_0 = 20
cool_fan_speed_min = 25
wall_thickness = 1.14
support_pattern = lines
support_infill_rate = 20
speed_topbottom = 20
support_enable = True
infill_sparse_density = 35
top_bottom_thickness = 0.75
adhesion_type = raft
line_width = 0.57
layer_0_z_overlap = 0.22
raft_base_line_width = 1.2
speed_print = 25
support_line_distance = 2.85
support_angle = 45
cool_min_layer_time = 3

46
resources/quality/ultimaker2_extended_plus/um2ep_cpep_0.6_normal.inst.cfg
View file

@ -1,46 +0,0 @@
[general]
version = 2
name = Normal Quality
definition = ultimaker2_extended_plus
[metadata]
type = quality
material = generic_cpe_plus_ultimaker2_extended_plus_0.6_mm
weight = 0
quality_type = normal
[values]
support_xy_distance = 0.6
speed_travel = 150
support_z_distance = 0.22
speed_wall_x = 35
cool_min_speed = 8
cool_fan_speed = 45
raft_surface_thickness = 0.2
raft_surface_line_width = 0.57
raft_interface_line_spacing = 1.4
raft_margin = 15
speed_layer_0 = 30
raft_airgap = 0.37
infill_overlap = 5
layer_height = 0.22
raft_base_line_spacing = 2.4
raft_interface_line_width = 1.2
speed_wall_0 = 30
cool_fan_speed_min = 25
wall_thickness = 1.14
support_pattern = lines
support_infill_rate = 20
speed_topbottom = 20
support_enable = True
infill_sparse_density = 35
top_bottom_thickness = 0.75
adhesion_type = raft
line_width = 0.57
layer_0_z_overlap = 0.22
raft_base_line_width = 1.2
speed_print = 35
support_line_distance = 2.85
support_angle = 45
cool_min_layer_time = 3

40
resources/quality/ultimaker2_extended_plus/um2ep_cpep_0.8_draft.inst.cfg
View file

@ -1,40 +0,0 @@
[general]
version = 2
name = Draft Print
definition = ultimaker2_extended_plus
[metadata]
type = quality
material = generic_cpe_plus_ultimaker2_extended_plus_0.8_mm
weight = 0
quality_type = draft
[values]
support_z_distance = 0.26
speed_wall_x = 25
cool_fan_speed = 50
raft_surface_thickness = 0.2
raft_surface_line_width = 0.7
raft_interface_line_spacing = 1.8
raft_airgap = 0.37
infill_overlap = 5
layer_height = 0.3
raft_interface_line_width = 1.6
top_bottom_thickness = 1.2
cool_fan_speed_min = 25
brim_line_count = 10
support_pattern = lines
support_infill_rate = 20
speed_topbottom = 20
support_enable = True
raft_margin = 15
adhesion_type = raft
infill_sparse_density = 40
layer_0_z_overlap = 0.22
raft_base_line_width = 1.6
speed_print = 25
speed_wall_0 = 20
support_angle = 45
cool_min_layer_time = 3
wall_thickness = 2.1

40
resources/quality/ultimaker2_extended_plus/um2ep_cpep_0.8_normal.inst.cfg
View file

@ -1,40 +0,0 @@
[general]
version = 2
name = Normal Quality
definition = ultimaker2_extended_plus
[metadata]
type = quality
material = generic_cpe_plus_ultimaker2_extended_plus_0.8_mm
weight = 0
quality_type = normal
[values]
support_z_distance = 0.26
speed_wall_x = 30
cool_fan_speed = 50
raft_surface_thickness = 0.2
raft_surface_line_width = 0.7
raft_interface_line_spacing = 1.8
raft_airgap = 0.37
infill_overlap = 5
layer_height = 0.2
raft_interface_line_width = 1.6
top_bottom_thickness = 1.2
cool_fan_speed_min = 25
brim_line_count = 10
support_pattern = lines
support_infill_rate = 20
speed_topbottom = 20
support_enable = True
raft_margin = 15
adhesion_type = raft
infill_sparse_density = 40
layer_0_z_overlap = 0.22
raft_base_line_width = 1.6
speed_print = 30
speed_wall_0 = 20
support_angle = 45
cool_min_layer_time = 3
wall_thickness = 2.1

43
resources/quality/ultimaker2_extended_plus/um2ep_nylon_0.25_high.inst.cfg
View file

@ -1,43 +0,0 @@
[general]
version = 2
name = High Quality
definition = ultimaker2_extended_plus
[metadata]
type = quality
material = generic_nylon_ultimaker2_extended_plus_0.25_mm
weight = 0
quality_type = high
[values]
support_xy_distance = 0.6
speed_travel = 150
cool_fan_speed = 60
support_z_distance = 0.45
speed_wall_x = 40
cool_min_speed = 15
raft_surface_line_width = 0.2
raft_interface_line_width = 0.5
brim_line_count = 8
raft_margin = 15
speed_layer_0 = 30
raft_airgap = 0.15
infill_overlap = 5
layer_height = 0.06
raft_interface_line_spacing = 0.7
speed_support = 40
top_bottom_thickness = 1.2
cool_fan_speed_min = 35
wall_thickness = 1
support_pattern = lines
support_infill_rate = 20
speed_topbottom = 35
support_enable = True
retraction_hop_enabled = 0.2
speed_wall_0 = 20
adhesion_type = raft
infill_sparse_density = 25
layer_0_z_overlap = 0.1
raft_base_line_width = 0.5
speed_print = 40

43
resources/quality/ultimaker2_extended_plus/um2ep_nylon_0.25_normal.inst.cfg
View file

@ -1,43 +0,0 @@
[general]
version = 2
name = Normal Quality
definition = ultimaker2_extended_plus
[metadata]
type = quality
material = generic_nylon_ultimaker2_extended_plus_0.25_mm
weight = 0
quality_type = normal
[values]
support_xy_distance = 0.6
speed_travel = 150
cool_fan_speed = 60
support_z_distance = 0.45
speed_wall_x = 40
cool_min_speed = 15
raft_surface_line_width = 0.2
raft_interface_line_width = 0.5
brim_line_count = 8
raft_margin = 15
speed_layer_0 = 30
raft_airgap = 0.15
infill_overlap = 5
layer_height = 0.1
raft_interface_line_spacing = 0.7
speed_support = 40
top_bottom_thickness = 1.2
cool_fan_speed_min = 35
wall_thickness = 1
support_pattern = lines
support_infill_rate = 20
speed_topbottom = 35
support_enable = True
retraction_hop_enabled = 0.2
speed_wall_0 = 20
adhesion_type = raft
infill_sparse_density = 25
layer_0_z_overlap = 0.1
raft_base_line_width = 0.5
speed_print = 40

42
resources/quality/ultimaker2_extended_plus/um2ep_nylon_0.4_fast.inst.cfg
View file

@ -1,42 +0,0 @@
[general]
version = 2
name = Fast Print
definition = ultimaker2_extended_plus
[metadata]
type = quality
material = generic_nylon_ultimaker2_extended_plus_0.4_mm
weight = 0
quality_type = fast
[values]
support_xy_distance = 0.6
speed_travel = 150
support_z_distance = 0.45
raft_interface_line_spacing = 1
cool_min_speed = 15
raft_surface_thickness = 0.15
raft_surface_line_width = 0.5
speed_layer_0 = 30
raft_airgap = 0.57
infill_overlap = 5
layer_height = 0.2
raft_interface_line_width = 0.8
top_bottom_thickness = 0.75
cool_fan_speed_min = 35
wall_thickness = 1.06
support_pattern = lines
support_infill_rate = 25
speed_topbottom = 20
support_enable = True
speed_wall = 40
raft_margin = 15
adhesion_type = raft
infill_sparse_density = 30
layer_0_z_overlap = 0.22
raft_base_line_spacing = 1.6
speed_print = 45
support_angle = 45
cool_min_layer_time = 3
raft_base_line_width = 0.8

41
resources/quality/ultimaker2_extended_plus/um2ep_nylon_0.4_normal.inst.cfg
View file

@ -1,41 +0,0 @@
[general]
version = 2
name = Normal Quality
definition = ultimaker2_extended_plus
[metadata]
type = quality
material = generic_nylon_ultimaker2_extended_plus_0.4_mm
weight = 0
quality_type = normal
[values]
support_xy_distance = 0.6
speed_travel = 150
support_z_distance = 0.45
raft_interface_line_spacing = 1
cool_min_speed = 15
raft_surface_thickness = 0.15
raft_surface_line_width = 0.5
speed_layer_0 = 30
raft_airgap = 0.57
infill_overlap = 5
layer_height = 0.15
raft_interface_line_width = 0.8
top_bottom_thickness = 0.75
cool_fan_speed_min = 35
wall_thickness = 1.06
support_pattern = lines
support_infill_rate = 25
support_enable = True
speed_wall = 40
raft_margin = 15
adhesion_type = raft
infill_sparse_density = 30
layer_0_z_overlap = 0.22
raft_base_line_spacing = 1.6
speed_print = 45
support_angle = 45
cool_min_layer_time = 3
raft_base_line_width = 0.8

46
resources/quality/ultimaker2_extended_plus/um2ep_nylon_0.6_fast.inst.cfg
View file

@ -1,46 +0,0 @@
[general]
version = 2
name = Fast Print
definition = ultimaker2_extended_plus
[metadata]
type = quality
material = generic_nylon_ultimaker2_extended_plus_0.6_mm
weight = 0
quality_type = fast
[values]
support_xy_distance = 0.7
speed_travel = 150
speed_wall_x = 40
cool_min_speed = 15
support_top_distance = 0.55
raft_surface_line_width = 0.6
raft_surface_thickness = 0.15
brim_line_count = 8
speed_layer_0 = 30
raft_interface_line_spacing = 1.4
infill_overlap = 5
layer_height = 0.3
raft_interface_line_width = 1.2
speed_support = 40
speed_wall_0 = 15
cool_fan_speed_min = 35
wall_thickness = 1.2
support_pattern = lines
support_infill_rate = 25
speed_topbottom = 35
support_enable = True
retraction_hop_enabled = 0.2
support_bottom_distance = 0.55
raft_margin = 15
adhesion_type = raft
infill_sparse_density = 35
layer_0_z_overlap = 0.22
top_bottom_thickness = 1.2
speed_print = 55
raft_airgap = 0.44
support_angle = 45
raft_base_line_spacing = 2.4
raft_base_line_width = 1.2

45
resources/quality/ultimaker2_extended_plus/um2ep_nylon_0.6_normal.inst.cfg
View file

@ -1,45 +0,0 @@
[general]
version = 2
name = Normal Quality
definition = ultimaker2_extended_plus
[metadata]
type = quality
material = generic_nylon_ultimaker2_extended_plus_0.6_mm
weight = 0
quality_type = normal
[values]
support_xy_distance = 0.7
speed_travel = 150
support_z_distance = 0.55
speed_wall_x = 40
cool_min_speed = 15
raft_surface_line_width = 0.6
raft_surface_thickness = 0.15
brim_line_count = 8
speed_layer_0 = 30
raft_interface_line_spacing = 1.4
infill_overlap = 5
layer_height = 0.15
raft_interface_line_width = 1.2
speed_support = 40
speed_wall_0 = 15
cool_fan_speed_min = 35
wall_thickness = 1.2
support_pattern = lines
support_infill_rate = 25
speed_topbottom = 35
support_enable = True
retraction_hop_enabled = 0.2
raft_margin = 15
adhesion_type = raft
infill_sparse_density = 35
layer_0_z_overlap = 0.22
top_bottom_thickness = 1.2
speed_print = 55
raft_airgap = 0.44
support_angle = 45
raft_base_line_spacing = 2.4
raft_base_line_width = 1.2

46
resources/quality/ultimaker2_extended_plus/um2ep_nylon_0.8_draft.inst.cfg
View file

@ -1,46 +0,0 @@
[general]
version = 2
name = Draft Print
definition = ultimaker2_extended_plus
[metadata]
type = quality
material = generic_nylon_ultimaker2_extended_plus_0.8_mm
weight = 0
quality_type = draft
[values]
support_xy_distance = 0.75
speed_travel = 150
support_z_distance = 0.5
speed_wall_x = 40
cool_min_speed = 15
brim_line_count = 8
support_top_distance = 0.5
raft_surface_thickness = 0.2
wall_thickness = 2.4
raft_margin = 15
speed_layer_0 = 30
raft_airgap = 0.44
infill_overlap = 5
layer_height = 0.3
raft_interface_line_width = 1.6
speed_support = 40
speed_wall_0 = 15
cool_fan_speed_min = 35
raft_surface_line_width = 0.7
support_pattern = lines
support_infill_rate = 25
speed_topbottom = 35
support_enable = True
retraction_hop_enabled = 0.2
support_bottom_distance = 0.65
top_bottom_thickness = 1.2
adhesion_type = raft
infill_sparse_density = 40
layer_0_z_overlap = 0.25
raft_base_line_width = 1.6
speed_print = 55
support_angle = 45
raft_interface_line_spacing = 1.8

46
resources/quality/ultimaker2_extended_plus/um2ep_nylon_0.8_normal.inst.cfg
View file

@ -1,46 +0,0 @@
[general]
version = 2
name = Normal Quality
definition = ultimaker2_extended_plus
[metadata]
type = quality
material = generic_nylon_ultimaker2_extended_plus_0.8_mm
weight = 0
quality_type = normal
[values]
support_xy_distance = 0.75
speed_travel = 150
support_z_distance = 0.5
speed_wall_x = 40
cool_min_speed = 15
brim_line_count = 8
support_top_distance = 0.5
raft_surface_thickness = 0.2
wall_thickness = 2.4
raft_margin = 15
speed_layer_0 = 30
raft_airgap = 0.44
infill_overlap = 5
layer_height = 0.2
raft_interface_line_width = 1.6
speed_support = 40
speed_wall_0 = 15
cool_fan_speed_min = 35
raft_surface_line_width = 0.7
support_pattern = lines
support_infill_rate = 25
speed_topbottom = 35
support_enable = True
retraction_hop_enabled = 0.2
support_bottom_distance = 0.65
top_bottom_thickness = 1.2
adhesion_type = raft
infill_sparse_density = 40
layer_0_z_overlap = 0.25
raft_base_line_width = 1.6
speed_print = 55
support_angle = 45
raft_interface_line_spacing = 1.8

36
resources/quality/ultimaker2_extended_plus/um2ep_pc_0.25_high.inst.cfg
View file

@ -1,36 +0,0 @@
[general]
version = 2
name = High Quality
definition = ultimaker2_extended_plus
[metadata]
type = quality
material = generic_pc_ultimaker2_extended_plus_0.25_mm
weight = 0
quality_type = high
[values]
support_z_distance = 0.19
raft_interface_line_spacing = 0.7
cool_min_speed = 15
cool_fan_speed = 50
raft_surface_line_width = 0.2
wall_thickness = 0.88
raft_airgap = 0.5
infill_overlap = 5
layer_height = 0.06
raft_interface_line_width = 0.5
cool_fan_speed_min = 0
brim_line_count = 32
support_pattern = lines
support_infill_rate = 20
support_enable = True
raft_margin = 15
adhesion_type = raft
infill_sparse_density = 25
layer_0_z_overlap = 0.22
cool_min_layer_time = 2
speed_print = 30
raft_base_line_spacing = 1
raft_base_line_width = 0.5

36
resources/quality/ultimaker2_extended_plus/um2ep_pc_0.25_normal.inst.cfg
View file

@ -1,36 +0,0 @@
[general]
version = 2
name = Normal Quality
definition = ultimaker2_extended_plus
[metadata]
type = quality
material = generic_pc_ultimaker2_extended_plus_0.25_mm
weight = 0
quality_type = normal
[values]
support_z_distance = 0.19
raft_interface_line_spacing = 0.7
cool_min_speed = 15
cool_fan_speed = 50
raft_surface_line_width = 0.2
wall_thickness = 0.88
raft_airgap = 0.5
infill_overlap = 5
layer_height = 0.1
raft_interface_line_width = 0.5
cool_fan_speed_min = 0
brim_line_count = 32
support_pattern = lines
support_infill_rate = 20
support_enable = True
raft_margin = 15
adhesion_type = raft
infill_sparse_density = 25
layer_0_z_overlap = 0.22
cool_min_layer_time = 2
speed_print = 30
raft_base_line_spacing = 1
raft_base_line_width = 0.5

37
resources/quality/ultimaker2_extended_plus/um2ep_pc_0.4_fast.inst.cfg
View file

@ -1,37 +0,0 @@
[general]
version = 2
name = Fast Print
definition = ultimaker2_extended_plus
[metadata]
type = quality
material = generic_pc_ultimaker2_extended_plus_0.4_mm
weight = 0
quality_type = fast
[values]
speed_wall_x = 30
support_z_distance = 0.19
raft_airgap = 0.57
cool_min_speed = 8
cool_fan_speed = 50
raft_interface_line_spacing = 1
infill_overlap = 5
layer_height = 0.2
raft_interface_line_width = 0.8
speed_wall_0 = 20
cool_fan_speed_min = 0
wall_thickness = 1.2
support_pattern = lines
support_infill_rate = 20
support_enable = True
raft_margin = 15
adhesion_type = raft
infill_sparse_density = 30
layer_0_z_overlap = 0.22
cool_min_layer_time = 3
speed_print = 45
support_angle = 45
raft_base_line_spacing = 1.6
raft_base_line_width = 0.8

37
resources/quality/ultimaker2_extended_plus/um2ep_pc_0.4_normal.inst.cfg
View file

@ -1,37 +0,0 @@
[general]
version = 2
name = Normal Quality
definition = ultimaker2_extended_plus
[metadata]
type = quality
material = generic_pc_ultimaker2_extended_plus_0.4_mm
weight = 0
quality_type = normal
[values]
speed_wall_x = 30
support_z_distance = 0.19
raft_airgap = 0.57
cool_min_speed = 8
cool_fan_speed = 50
raft_interface_line_spacing = 1
infill_overlap = 5
layer_height = 0.1
raft_interface_line_width = 0.8
speed_wall_0 = 20
cool_fan_speed_min = 0
wall_thickness = 1.2
support_pattern = lines
support_infill_rate = 20
support_enable = True
raft_margin = 15
adhesion_type = raft
infill_sparse_density = 30
layer_0_z_overlap = 0.22
cool_min_layer_time = 3
speed_print = 45
support_angle = 45
raft_base_line_spacing = 1.6
raft_base_line_width = 0.8

44
resources/quality/ultimaker2_extended_plus/um2ep_pc_0.6_fast.inst.cfg
View file

@ -1,44 +0,0 @@
[general]
version = 2
name = Fast Print
definition = ultimaker2_extended_plus
[metadata]
type = quality
material = generic_pc_ultimaker2_extended_plus_0.6_mm
weight = 0
quality_type = fast
[values]
speed_travel = 150
support_z_distance = 0.21
speed_wall_x = 40
cool_min_speed = 8
cool_fan_speed = 50
raft_surface_thickness = 0.15
raft_surface_line_width = 0.6
raft_interface_line_spacing = 1.4
speed_layer_0 = 30
raft_airgap = 0.52
infill_overlap = 5
layer_height = 0.3
raft_interface_line_width = 1.2
raft_margin = 15
cool_fan_speed_min = 0
wall_thickness = 1.06
support_pattern = lines
support_infill_rate = 20
speed_topbottom = 20
support_enable = True
top_bottom_thickness = 0.75
adhesion_type = raft
infill_sparse_density = 35
layer_0_z_overlap = 0.22
raft_base_line_spacing = 2.4
speed_print = 45
support_line_distance = 3.5333
speed_wall_0 = 30
support_angle = 45
cool_min_layer_time = 3
raft_base_line_width = 1.2

44
resources/quality/ultimaker2_extended_plus/um2ep_pc_0.6_normal.inst.cfg
View file

@ -1,44 +0,0 @@
[general]
version = 2
name = Normal Quality
definition = ultimaker2_extended_plus
[metadata]
type = quality
material = generic_pc_ultimaker2_extended_plus_0.6_mm
weight = 0
quality_type = normal
[values]
speed_travel = 150
support_z_distance = 0.21
speed_wall_x = 40
cool_min_speed = 8
cool_fan_speed = 50
raft_surface_thickness = 0.15
raft_surface_line_width = 0.6
raft_interface_line_spacing = 1.4
speed_layer_0 = 30
raft_airgap = 0.52
infill_overlap = 5
layer_height = 0.15
raft_interface_line_width = 1.2
raft_margin = 15
cool_fan_speed_min = 0
wall_thickness = 1.06
support_pattern = lines
support_infill_rate = 20
speed_topbottom = 20
support_enable = True
top_bottom_thickness = 0.75
adhesion_type = raft
infill_sparse_density = 35
layer_0_z_overlap = 0.22
raft_base_line_spacing = 2.4
speed_print = 45
support_line_distance = 3.5333
speed_wall_0 = 30
support_angle = 45
cool_min_layer_time = 3
raft_base_line_width = 1.2

37
resources/quality/ultimaker2_extended_plus/um2ep_pc_0.8_draft.inst.cfg
View file

@ -1,37 +0,0 @@
[general]
version = 2
name = Draft Print
definition = ultimaker2_extended_plus
[metadata]
type = quality
material = generic_pc_ultimaker2_extended_plus_0.8_mm
weight = 0
quality_type = draft
[values]
support_z_distance = 0.26
raft_airgap = 0.47
cool_fan_speed = 50
raft_surface_line_width = 0.7
raft_surface_thickness = 0.2
brim_line_count = 10
raft_interface_line_spacing = 1.8
infill_overlap = 5
layer_height = 0.5
raft_interface_line_width = 1.6
top_bottom_thickness = 2.0
cool_fan_speed_min = 25
wall_thickness = 2.1
support_pattern = lines
support_infill_rate = 20
support_enable = True
raft_margin = 15
adhesion_type = raft
infill_sparse_density = 40
layer_0_z_overlap = 0.22
raft_base_line_width = 1.6
speed_print = 40
support_angle = 45
cool_min_layer_time = 3

37
resources/quality/ultimaker2_extended_plus/um2ep_pc_0.8_normal.inst.cfg
View file

@ -1,37 +0,0 @@
[general]
version = 2
name = Normal Quality
definition = ultimaker2_extended_plus
[metadata]
type = quality
material = generic_pc_ultimaker2_extended_plus_0.8_mm
weight = 0
quality_type = normal
[values]
support_z_distance = 0.26
raft_airgap = 0.47
cool_fan_speed = 50
raft_surface_line_width = 0.7
raft_surface_thickness = 0.2
brim_line_count = 10
raft_interface_line_spacing = 1.8
infill_overlap = 5
layer_height = 0.2
raft_interface_line_width = 1.6
top_bottom_thickness = 1.2
cool_fan_speed_min = 25
wall_thickness = 2.1
support_pattern = lines
support_infill_rate = 20
support_enable = True
raft_margin = 15
adhesion_type = raft
infill_sparse_density = 40
layer_0_z_overlap = 0.22
raft_base_line_width = 1.6
speed_print = 40
support_angle = 45
cool_min_layer_time = 3

19
resources/quality/ultimaker2_extended_plus/um2ep_pla_0.25_normal.inst.cfg
View file

@ -1,19 +0,0 @@
[general]
version = 2
name = High Quality
definition = ultimaker2_extended_plus
[metadata]
type = quality
material = generic_pla_ultimaker2_extended_plus_0.25_mm
weight = -2
quality_type = high
[values]
layer_height = 0.06
wall_thickness = 0.88
top_bottom_thickness = 0.72
infill_sparse_density = 22
speed_print = 30
cool_min_layer_time = 5
cool_min_speed = 10

21
resources/quality/ultimaker2_extended_plus/um2ep_pla_0.4_fast.inst.cfg
View file

@ -1,21 +0,0 @@
[general]
version = 2
name = Fast Print
definition = ultimaker2_extended_plus
[metadata]
type = quality
material = generic_pla_ultimaker2_extended_plus_0.4_mm
weight = -1
quality_type = fast
[values]
layer_height = 0.15
wall_thickness = 0.7
top_bottom_thickness = 0.75
infill_sparse_density = 18
speed_print = 60
speed_travel = 150
speed_layer_0 = 30
cool_min_layer_time = 5
cool_min_speed = 10

19
resources/quality/ultimaker2_extended_plus/um2ep_pla_0.4_high.inst.cfg
View file

@ -1,19 +0,0 @@
[general]
version = 2
name = High Quality
definition = ultimaker2_extended_plus
[metadata]
type = quality
material = generic_pla_ultimaker2_extended_plus_0.4_mm
weight = -3
quality_type = high
[values]
layer_height = 0.06
wall_thickness = 1.05
top_bottom_thickness = 0.72
infill_sparse_density = 22
speed_print = 50
cool_min_layer_time = 5
cool_min_speed = 10

19
resources/quality/ultimaker2_extended_plus/um2ep_pla_0.4_normal.inst.cfg
View file

@ -1,19 +0,0 @@
[general]
version = 2
name = Normal Quality
definition = ultimaker2_extended_plus
[metadata]
type = quality
material = generic_pla_ultimaker2_extended_plus_0.4_mm
weight = -2
quality_type = normal
[values]
layer_height = 0.1
wall_thickness = 1.05
top_bottom_thickness = 0.8
infill_sparse_density = 20
speed_print = 50
cool_min_layer_time = 5
cool_min_speed = 10

19
resources/quality/ultimaker2_extended_plus/um2ep_pla_0.6_normal.inst.cfg
View file

@ -1,19 +0,0 @@
[general]
version = 2
name = Normal Quality
definition = ultimaker2_extended_plus
[metadata]
material = generic_pla_ultimaker2_extended_plus_0.6_mm
type = quality
weight = -2
quality_type = normal
[values]
layer_height = 0.15
wall_thickness = 1.59
top_bottom_thickness = 1.2
infill_sparse_density = 20
speed_print = 55
cool_min_layer_time = 5
cool_min_speed = 10

19
resources/quality/ultimaker2_extended_plus/um2ep_pla_0.8_normal.inst.cfg
View file

@ -1,19 +0,0 @@
[general]
version = 2
name = Fast Print
definition = ultimaker2_extended_plus
[metadata]
material = generic_pla_ultimaker2_extended_plus_0.8_mm
type = quality
weight = -2
quality_type = fast
[values]
layer_height = 0.2
wall_thickness = 2.1
top_bottom_thickness = 1.2
infill_sparse_density = 20
speed_print = 40
cool_min_layer_time = 5
cool_min_speed = 10

42
resources/quality/ultimaker2_extended_plus/um2ep_tpu_0.25_high.inst.cfg
View file

@ -1,42 +0,0 @@
[general]
version = 2
name = High Quality
definition = ultimaker2_extended_plus
[metadata]
type = quality
material = generic_tpu_ultimaker2_extended_plus_0.25_mm
weight = 0
quality_type = high
[values]
support_xy_distance = 0.6
cool_min_speed = 15
support_infill_rate = 25
speed_wall_0 = 15
layer_0_z_overlap = 0.1
cool_min_layer_time = 7
speed_layer_0 = 30
speed_print = 40
wall_thickness = 0.88
support_enable = True
speed_topbottom = 35
raft_surface_line_width = 0.2
raft_base_line_spacing = 1
top_bottom_thickness = 1.2
layer_height = 0.06
support_angle = 45
infill_sparse_density = 10
cool_fan_speed = 60
speed_travel = 150
speed_support = 40
support_z_distance = 0.45
cool_fan_speed_min = 35
brim_line_count = 8
retraction_hop_enabled = 0.2
speed_wall_x = 38
raft_airgap = 0.2
raft_interface_line_spacing = 1
adhesion_type = brim
raft_interface_line_width = 0.2

39
resources/quality/ultimaker2_extended_plus/um2ep_tpu_0.4_normal.inst.cfg
View file

@ -1,39 +0,0 @@
[general]
version = 2
name = Normal Quality
definition = ultimaker2_extended_plus
[metadata]
type = quality
material = generic_tpu_ultimaker2_extended_plus_0.4_mm
weight = 0
quality_type = normal
[values]
support_xy_distance = 0.65
speed_travel = 150
support_z_distance = 0.45
speed_wall_x = 35
cool_min_speed = 15
cool_fan_speed = 60
retraction_hop_enabled = 0.2
brim_line_count = 8
speed_layer_0 = 30
raft_interface_line_spacing = 1
raft_base_line_spacing = 2
speed_support = 40
raft_margin = 12
cool_fan_speed_min = 35
wall_thickness = 1.05
support_infill_rate = 25
speed_topbottom = 35
support_enable = True
speed_wall_0 = 20
adhesion_type = brim
infill_sparse_density = 10
top_bottom_thickness = 1.2
speed_print = 40
support_angle = 45
cool_min_layer_time = 10
raft_base_line_width = 0.8

44
resources/quality/ultimaker2_extended_plus/um2ep_tpu_0.6_fast.inst.cfg
View file

@ -1,44 +0,0 @@
[general]
version = 2
name = Fast Print
definition = ultimaker2_extended_plus
[metadata]
type = quality
material = generic_tpu_ultimaker2_extended_plus_0.6_mm
weight = 0
quality_type = fast
[values]
support_xy_distance = 0.7
raft_base_line_width = 0.6
cool_min_speed = 15
line_width = 0.57
support_infill_rate = 25
speed_wall_0 = 15
wall_thickness = 1.14
raft_base_line_spacing = 1.2
speed_layer_0 = 30
raft_margin = 15
speed_travel = 150
raft_surface_line_width = 0.5
layer_height = 0.12
raft_interface_line_width = 0.57
speed_print = 45
top_bottom_thickness = 1.2
speed_topbottom = 35
layer_0_z_overlap = 0.12
support_angle = 45
infill_sparse_density = 10
cool_fan_speed = 60
speed_support = 40
support_z_distance = 0.45
cool_fan_speed_min = 35
brim_line_count = 8
retraction_hop_enabled = 0.2
speed_wall_x = 40
support_enable = True
raft_interface_line_spacing = 1.2
adhesion_type = brim
raft_airgap = 0.24