Merge pull request #11637 from 3d-hctech/master

Add profiles and platforms for 3 new printer from HCTECH

resources/definitions/hctech_hc300-m1&m1h.def.json

@@ -0,0 +1,57 @@
+{
+    "version": 2,
+    "name": "HCTECH_HC300-M1&M1H",
+    "inherits": "fdmprinter",
+    "metadata": {
+        "visible": true,
+        "author": "HCTECH",
+        "manufacturer": "HCTECH",
+        "file_formats": "text/x-gcode",
+        "platform": "hctech_hc300-m1&m1h.3mf",
+        "has_machine_quality": false,
+        "machine_extruder_trains": {
+            "0": "hctech_hc300-m1&m1h_extruder_0"
+        }
+    },
+
+    "overrides": {
+        "machine_head_with_fans_polygon": { "default_value": [
+            [-61, 86],
+            [-61, -31],
+            [21, -31],
+            [21, 86]
+        ] },
+        "machine_name": { "default_value": "HCTECH HC300-M1&M1H" },
+        "machine_extruder_count": { "default_value": 1 },
+        "machine_heated_bed": { "default_value": true },
+        "machine_width": { "default_value": 300 },
+        "machine_depth": { "default_value": 300 },
+        "machine_height": { "default_value": 300 },
+        "machine_center_is_zero": { "default_value": false },
+        "retraction_amount": {
+            "default_value": 0.3,
+            "maximum_value_warning": 2.0
+        },
+        "adhesion_type": { "default_value": "skirt" },
+        "retraction_speed": { "default_value": 35},
+        "travel_avoid_supports": { "value": true },
+        "travel_retract_before_outer_wall": { "value": true },
+        "retraction_enable": { "value": true },
+
+        "gantry_height": { "value": "55" },
+        "speed_print": { "default_value": 60.0 } ,
+
+        "material_diameter": { "default_value": 1.75 },
+
+        "machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
+        "machine_start_gcode": { "default_value": "G1 Z2 ;Raise Z\nG28 X Y ;Home XY\nG92 E0 ;Reset Extruder\nG1 E-1 F2400 ;Retract\nG92 E0 ;Reset Extruder\nG28 Z ;home Z\nG29 ; Measure the bed\nM500 ; Store to EEPROM\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z0.36 F5000.0 ; Move to start position\nG1 X0.1 Y200.0 Z0.36 F1500.0 E15 ; Draw the first line\nG1 X0.4 Y200.0 Z0.36 F5000.0 ; Move to side a little\nG1 X0.4 Y20 Z0.36 F1500.0 E30 ; Draw the second line\nG92 E0 ; Reset Extruder" },
+        "machine_end_gcode": { "default_value": "G91 ;Relative positioning\nG1 E-1 F2700 ;Retract a bit\nG1 Z1 E-1 F2400 ;Retract and raise Z\nG1 Z2 ;Raise Z\nG90 ;Absolute positioning\nG12 P1;clean nozzle\nG1 X5 Y300 ;Return to Start Point\nM106 S0 ;Switch off part cooling fan\nM104 S0 ;turn off temperature\nM140 S0 ;turn off Heated Bed\nM84 X Y E ;Disable all steppers but Z\nM81 ;turn-off power" },
+
+        "cool_fan_speed": { "value": 75 },
+        "cool_fan_enabled": { "value": true },
+
+        "line_width": { "value": 0.38 },
+        "travel_avoid_distance": { "value": 1 },
+        "infill_before_walls": { "value": false }
+    }
+}

resources/definitions/hctech_hc300-m2h.def.json

@@ -0,0 +1,58 @@
+{
+    "version": 2,
+    "name": "HCTECH_HC300-M2H",
+    "inherits": "fdmprinter",
+    "metadata": {
+        "visible": true,
+        "author": "HCTECH",
+        "manufacturer": "HCTECH",
+        "file_formats": "text/x-gcode",
+        "platform": "hctech_hc300-m2h.3mf",
+        "has_machine_quality": false,
+        "machine_extruder_trains": {
+            "0": "hctech_hc300-m2h_extruder_0",
+            "1": "hctech_hc300-m2h_extruder_1"
+        }
+    },
+
+    "overrides": {
+        "machine_head_with_fans_polygon": { "default_value": [
+            [-61, 86],
+            [-61, -37],
+            [85, -37],
+            [85, 86]
+        ] },
+        "machine_name": { "default_value": "HCTECH HC300-M2H" },
+        "machine_extruder_count": { "default_value": 2 },
+        "machine_heated_bed": { "default_value": true },
+        "machine_width": { "default_value": 300 },
+        "machine_depth": { "default_value": 300 },
+        "machine_height": { "default_value": 300 },
+        "machine_center_is_zero": { "default_value": false },
+        "retraction_amount": {
+            "default_value": 0.3,
+            "maximum_value_warning": 2.0
+        },
+        "adhesion_type": { "default_value": "skirt" },
+        "retraction_speed": { "default_value": 35},
+        "travel_avoid_supports": { "value": true },
+        "travel_retract_before_outer_wall": { "value": true },
+        "retraction_enable": { "value": true },
+
+        "gantry_height": { "value": "55" },
+        "speed_print": { "default_value": 60.0 } ,
+
+        "material_diameter": { "default_value": 1.75 },
+
+        "machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
+        "machine_start_gcode": { "default_value": "G1 Z2 ;Raise Z\nG28 X Y ;Home XY\nT1 ;switch to right extruder\nG1 X5 Y319 F4000 ;Move to Start Position\nG92 E0 ;Reset Extruder\nG1 E20 F60 ;extrude\nM400 ;Wait move\nG92 E0 ;Reset Extruder\nG1 E-2 F2700 ;Retract\nG92 E0 ;Reset Extruder\nG1 X150 F5000 ;Clean Nozzle\nG1 X5 ;Clean Nozzle\nG1 X220 ;Repeat\nG1 X5 ;Back to start posotion\nT0 ;switch to left extruder\nG1 X5 Y319 F4000 ;Move to Start Position\nG92 E0 ;Reset Extruder\nG1 E20 F60 ;extrude\nM400 ;Wait move\nG92 E0 ;Reset Extruder\nG4 S15 ;Wait 15s\nG1 E-2 F2700; Retract\nG92 E0 ;Reset Extruder\nG1 X150 F5000 ;Clean Nozzle\nG1 X5 ;Clean nozzle\nG1 X220 ;Repeat\nG1 X5 ;Back to start position\nG28 Z ;home Z\nG29 ;Measure the bed\nM500 ;Store parameters\nG1 X0 Y300 F4000 ;Move to corner" },
+        "machine_end_gcode": { "default_value": "G91 ;Relative positioning\nG1 E-1 F2700 ;Retract a bit\nG1 Z1 E-1 F2400 ;Retract and raise Z\nG1 Z2 ;Raise Z\nG90 ;Absolute positioning\nG12 ;clean nozzle\nG1 X5 Y319 ;Return to Start Point\nM106 S0 ;Switch off part cooling fan\nM104 S0 ;turn off temperature\nM140 S0 ;turn off Heated Bed\nM84 X Y E ;Disable all steppers but Z\nM81 ;turn-off power" },
+        
+        "cool_fan_speed": { "value": 75 },
+        "cool_fan_enabled": { "value": true },
+       
+        "line_width": { "value": 0.38 },
+        "travel_avoid_distance": { "value": 1 },
+		"infill_before_walls": { "value": false }
+    }
+}

resources/definitions/hctech_hc300-m3.def.json

@@ -0,0 +1,58 @@
+{
+    "version": 2,
+    "name": "HCTECH_HC300-M3",
+    "inherits": "fdmprinter",
+    "metadata": {
+        "visible": true,
+        "author": "HCTECH",
+        "manufacturer": "HCTECH",
+        "file_formats": "text/x-gcode",
+        "platform": "hctech_hc300-m3.3mf",
+        "has_machine_quality": false,
+        "machine_extruder_trains": {
+            "0": "hctech_hc300-m3_extruder_0"
+        }
+    },
+
+    "overrides": {
+        "machine_head_with_fans_polygon":
+		{ "default_value": [
+				[-49, 36],
+				[-36, -29],
+				[36, -29],
+				[36, 49]
+			] 
+		},
+        "machine_name": { "default_value": "HCTECH HC300-M3" },
+        "machine_extruder_count": { "default_value": 1 },
+        "machine_heated_bed": { "default_value": true },
+        "machine_width": { "default_value": 300 },
+        "machine_depth": { "default_value": 300 },
+        "machine_height": { "default_value": 300 },
+        "machine_center_is_zero": { "default_value": false },
+        "retraction_amount": {
+            "default_value": 3,
+            "maximum_value_warning": 8
+        },
+        "adhesion_type": { "default_value": "skirt" },
+        "retraction_speed": { "default_value": 35},
+        "travel_avoid_supports": { "value": true },
+        "travel_retract_before_outer_wall": { "value": true },
+        "retraction_enable": { "value": true },
+
+        "gantry_height": { "value": "55" },
+        "speed_print": { "default_value": 60.0 } ,
+
+        "material_diameter": { "default_value": 1.75 },
+        "machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
+        "machine_start_gcode": { "default_value": "G28 X Y ;Home XY\nG92 E0 ;Reset Extruder\nG1 E-1 F2400 ;Retract\nG92 E0 ;Reset Extruder\nG28 Z ;home Z\nG29 ; Measure the bed\nM500 ; Store to EEPROM\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z0.36 F5000.0 ; Move to start position\nG1 X0.1 Y200.0 Z0.36 F1500.0 E15 ; Draw the first line\nG1 X0.4 Y200.0 Z0.36 F5000.0 ; Move to side a little\nG1 X0.4 Y20 Z0.36 F1500.0 E30 ; Draw the second line\nG92 E0 ; Reset Extruder" },
+        "machine_end_gcode": { "default_value": "G91 ;Relative positioning\nG1 E-2 F2700 ;Retract a bit\nG1 Z1 E-2 F2400 ;Retract and raise Z\nG1 Z2 ;Raise Z\nG90 ;Absolute positioning\nG1 X5 Y290 ;Return to Start Point\nM106 S0 ;Switch off part cooling fan\nM104 S0 ;turn off temperature\nM140 S0 ;turn off Heated Bed\nM84 X Y E ;Disable all steppers but Z" },
+		        
+        "cool_fan_speed": { "value": 75 },
+        "cool_fan_enabled": { "value": true },
+        
+        "line_width": { "value": 0.38 },
+        "travel_avoid_distance": { "value": 1 },
+		"infill_before_walls": { "value": false }
+    }
+}

resources/extruders/hctech_hc300-m1&m1h_extruder_0.def.json

@@ -0,0 +1,15 @@
+{
+    "version": 2,
+    "name": "Extruder 1",
+    "inherits": "fdmextruder",
+    "metadata": {
+        "machine": "hctech_hc300-m1&m1h",
+        "position": "0"
+    },
+
+    "overrides": {
+        "extruder_nr": { "default_value": 0 },
+        "material_diameter": { "default_value": 1.75 },
+        "machine_nozzle_size": { "default_value": 0.4 }
+    }
+}

resources/extruders/hctech_hc300-m2h_extruder_0.def.json

@@ -0,0 +1,27 @@
+{
+    "version": 2,
+    "name": "Left Extruder",
+    "inherits": "fdmextruder",
+    "metadata": {
+        "machine": "hctech_hc300-m2h",
+        "position": "0"
+    },
+
+    "overrides": {
+        "extruder_nr": {
+            "default_value": 0,
+            "maximum_value": "1"
+        },
+        "machine_nozzle_offset_x": { "default_value": 0.0 },
+        "machine_nozzle_offset_y": { "default_value": 0.0 },
+        "material_diameter": { "default_value": 1.75 },
+        "machine_nozzle_size": { "default_value": 0.4 },
+        "machine_extruder_start_code": {
+            "default_value": "G1 X5 Y319 ;move to wait posiotion\nT0 ;switch to extruder 1\nM109 S{material_print_temperature}\nG1 F5000\nG12 ;clean nozzle\nG1 X0 Y300 F4800 ;move to start point"
+        },
+        "machine_extruder_end_code": {
+            "default_value": "G92 E0 ;reset extruder distance\nG1 F800 E-1 ;retract\nG92 E0 ;reset extruder distance\nG1 X0 Y300 F4800 ;move to start position\nG1 X5 Y319 ;move to wait posiotion"
+        },
+        "machine_extruder_cooling_fan_number": { "default_value": 0 }
+    }
+}

resources/extruders/hctech_hc300-m2h_extruder_1.def.json

@@ -0,0 +1,27 @@
+{
+    "version": 2,
+    "name": "Right Extruder",
+    "inherits": "fdmextruder",
+    "metadata": {
+        "machine": "hctech_hc300-m2h",
+        "position": "1"
+    },
+
+    "overrides": {
+        "extruder_nr": {
+            "default_value": 1,
+            "maximum_value": "1"
+        },
+        "machine_nozzle_offset_x": { "default_value": 0.0 },
+        "machine_nozzle_offset_y": { "default_value": 0.0 },
+        "material_diameter": { "default_value": 1.75 },
+        "machine_nozzle_size": { "default_value": 0.4 },
+        "machine_extruder_start_code": {
+            "default_value": "G1 X5 Y319 ;move to wait posiotion\nT1 ;switch to extruder 2\nM109 S{material_print_temperature}\nG1 F5000\nG12 ;clean nozzle\nG1 X0 Y300 F4800 ;move to start point"
+        },
+        "machine_extruder_end_code": {
+            "default_value": "G92 E0 ;reset extruder distance\nG1 F800 E-1 ;retract\nG92 E0 ;reset extruder distance\nG1 X0 Y300 F4800 ;move to start position\nG1 X5 Y319 ;move to wait posiotion"
+        },
+        "machine_extruder_cooling_fan_number": { "default_value": 0 }
+    }
+}

resources/extruders/hctech_hc300-m3_extruder_0.def.json

@@ -0,0 +1,15 @@
+{
+    "version": 2,
+    "name": "Extruder 1",
+    "inherits": "fdmextruder",
+    "metadata": {
+        "machine": "hctech_hc300-m3",
+        "position": "0"
+    },
+
+    "overrides": {
+        "extruder_nr": { "default_value": 0 },
+        "material_diameter": { "default_value": 1.75 },
+        "machine_nozzle_size": { "default_value": 0.4 }
+    }
+}