diff --git a/resources/definitions/ultimaker_s8.def.json b/resources/definitions/ultimaker_s8.def.json index cbd6e255f8..165a7719b2 100644 --- a/resources/definitions/ultimaker_s8.def.json +++ b/resources/definitions/ultimaker_s8.def.json @@ -237,7 +237,10 @@ "default_material_print_temperature": { "maximum_value_warning": 320 }, "extra_infill_lines_to_support_skins": { "value": "'walls_and_lines'" }, "flooring_layer_count": { "value": 1 }, - "gradual_flow_enabled": { "value": false }, + "flooring_material_flow": { "value": "skin_material_flow * 110/93" }, + "flooring_monotonic": { "value": false }, + "gradual_flow_discretisation_step_size": { "value": 1 }, + "gradual_flow_enabled": { "value": true }, "hole_xy_offset": { "value": 0.075 }, "infill_material_flow": { "value": "material_flow if infill_sparse_density < 95 else 95" }, "infill_overlap": { "value": 10 }, @@ -428,7 +431,7 @@ }, "material_print_temperature": { "maximum_value_warning": 320 }, "material_print_temperature_layer_0": { "maximum_value_warning": 320 }, - "max_flow_acceleration": { "value": 8.0 }, + "max_flow_acceleration": { "value": 1.5 }, "max_skin_angle_for_expansion": { "value": 45 }, "meshfix_maximum_resolution": { "value": 0.4 }, "min_infill_area": { "default_value": 10 }, @@ -444,10 +447,13 @@ "retraction_hop_enabled": { "value": true }, "retraction_min_travel": { "value": "2.5 if support_enable and support_structure=='tree' else line_width * 2.5" }, "retraction_prime_speed": { "value": 15 }, + "roofing_monotonic": { "value": false }, + "roofing_pattern": { "value": "'zigzag'" }, + "seam_overhang_angle": { "value": 35 }, "skin_edge_support_thickness": { "value": 0 }, "skin_material_flow": { "value": 93 }, "skin_outline_count": { "value": 0 }, - "skin_overlap": { "value": 0 }, + "skin_overlap": { "value": 20 }, "skin_preshrink": { "value": 0 }, "skirt_brim_minimal_length": { "value": 1000 }, "skirt_brim_speed": @@ -543,12 +549,12 @@ "speed_wall": { "maximum_value_warning": 300, - "value": "speed_print*2/3" + "value": "speed_print*1/2" }, "speed_wall_0": { "maximum_value_warning": 300, - "value": "speed_wall" + "value": "speed_wall*60/75" }, "speed_wall_0_flooring": { diff --git a/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_abs_0.2mm_engineering.inst.cfg b/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_abs_0.2mm_engineering.inst.cfg index 1d1cae70e6..7bbf373b2e 100644 --- a/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_abs_0.2mm_engineering.inst.cfg +++ b/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_abs_0.2mm_engineering.inst.cfg @@ -12,7 +12,10 @@ type = intent variant = AA+ 0.4 [values] +hole_xy_offset = 0.075 infill_sparse_density = 20 +inset_direction = outside-in top_bottom_thickness = =wall_thickness wall_thickness = =line_width * 4 +xy_offset = 0.075 diff --git a/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_abs_0.2mm_quick.inst.cfg b/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_abs_0.2mm_quick.inst.cfg index 9889424797..fe4b0497e1 100644 --- a/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_abs_0.2mm_quick.inst.cfg +++ b/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_abs_0.2mm_quick.inst.cfg @@ -16,7 +16,12 @@ cool_min_layer_time = 5 cool_min_layer_time_overhang = 9 cool_min_speed = 6 cool_min_temperature = =material_print_temperature - 15 +gradual_flow_enable = False +hole_xy_offset = 0.075 +inset_direction = outside-in +speed_wall = =speed_print speed_wall_x = =speed_print speed_wall_x_roofing = =speed_wall wall_line_width_x = =wall_line_width +xy_offset = 0.075 diff --git a/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_cpe-plus_0.2mm_engineering.inst.cfg b/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_cpe-plus_0.2mm_engineering.inst.cfg index 21e814e112..d01f907d33 100644 --- a/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_cpe-plus_0.2mm_engineering.inst.cfg +++ b/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_cpe-plus_0.2mm_engineering.inst.cfg @@ -12,7 +12,10 @@ type = intent variant = AA+ 0.4 [values] +hole_xy_offset = 0.075 infill_sparse_density = 20 +inset_direction = outside-in top_bottom_thickness = =wall_thickness wall_thickness = =line_width * 4 +xy_offset = 0.075 diff --git a/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_cpe_0.2mm_engineering.inst.cfg b/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_cpe_0.2mm_engineering.inst.cfg index f52cdf8124..7a96aa3f79 100644 --- a/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_cpe_0.2mm_engineering.inst.cfg +++ b/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_cpe_0.2mm_engineering.inst.cfg @@ -12,7 +12,10 @@ type = intent variant = AA+ 0.4 [values] +hole_xy_offset = 0.075 infill_sparse_density = 20 +inset_direction = outside-in top_bottom_thickness = =wall_thickness wall_thickness = =line_width * 4 +xy_offset = 0.075 diff --git a/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_pc_0.2mm_engineering.inst.cfg b/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_pc_0.2mm_engineering.inst.cfg index 8332ecacbc..1b666e4d83 100644 --- a/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_pc_0.2mm_engineering.inst.cfg +++ b/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_pc_0.2mm_engineering.inst.cfg @@ -12,7 +12,10 @@ type = intent variant = AA+ 0.4 [values] +hole_xy_offset = 0.075 infill_sparse_density = 20 +inset_direction = outside-in top_bottom_thickness = =wall_thickness wall_thickness = =line_width * 4 +xy_offset = 0.075 diff --git a/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_petg_0.2mm_engineering.inst.cfg b/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_petg_0.2mm_engineering.inst.cfg index 4c4490876f..3dd4ef5f01 100644 --- a/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_petg_0.2mm_engineering.inst.cfg +++ b/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_petg_0.2mm_engineering.inst.cfg @@ -12,7 +12,10 @@ type = intent variant = AA+ 0.4 [values] +hole_xy_offset = 0.075 infill_sparse_density = 20 +inset_direction = outside-in top_bottom_thickness = =wall_thickness wall_thickness = =line_width * 4 +xy_offset = 0.075 diff --git a/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_petg_0.2mm_quick.inst.cfg b/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_petg_0.2mm_quick.inst.cfg index ae38c02395..0fe5944438 100644 --- a/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_petg_0.2mm_quick.inst.cfg +++ b/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_petg_0.2mm_quick.inst.cfg @@ -16,7 +16,12 @@ cool_min_layer_time = 5 cool_min_layer_time_overhang = 9 cool_min_speed = 6 cool_min_temperature = =material_print_temperature - 15 +gradual_flow_enable = False +hole_xy_offset = 0.075 +inset_direction = outside-in +speed_wall = =speed_print speed_wall_x = =speed_print speed_wall_x_roofing = =speed_wall wall_line_width_x = =wall_line_width +xy_offset = 0.075 diff --git a/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_pla_0.2mm_engineering.inst.cfg b/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_pla_0.2mm_engineering.inst.cfg index 484b9536a6..d2bbcf226e 100644 --- a/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_pla_0.2mm_engineering.inst.cfg +++ b/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_pla_0.2mm_engineering.inst.cfg @@ -12,7 +12,10 @@ type = intent variant = AA+ 0.4 [values] +hole_xy_offset = 0.075 infill_sparse_density = 20 +inset_direction = outside-in top_bottom_thickness = =wall_thickness wall_thickness = =line_width * 4 +xy_offset = 0.075 diff --git a/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_pla_0.2mm_quick.inst.cfg b/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_pla_0.2mm_quick.inst.cfg index 4509317076..a4730213de 100644 --- a/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_pla_0.2mm_quick.inst.cfg +++ b/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_pla_0.2mm_quick.inst.cfg @@ -16,7 +16,12 @@ cool_min_layer_time = 5 cool_min_layer_time_overhang = 9 cool_min_speed = 6 cool_min_temperature = =material_print_temperature - 15 +gradual_flow_enable = False +hole_xy_offset = 0.075 +inset_direction = outside-in +speed_wall = =speed_print speed_wall_x = =speed_print speed_wall_x_roofing = =speed_wall wall_line_width_x = =wall_line_width +xy_offset = 0.075 diff --git a/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_tough-pla_0.2mm_engineering.inst.cfg b/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_tough-pla_0.2mm_engineering.inst.cfg index c5b81e4a4c..ed68baf7b1 100644 --- a/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_tough-pla_0.2mm_engineering.inst.cfg +++ b/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_tough-pla_0.2mm_engineering.inst.cfg @@ -12,7 +12,10 @@ type = intent variant = AA+ 0.4 [values] +hole_xy_offset = 0.075 infill_sparse_density = 20 +inset_direction = outside-in top_bottom_thickness = =wall_thickness wall_thickness = =line_width * 4 +xy_offset = 0.075 diff --git a/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_tough-pla_0.2mm_quick.inst.cfg b/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_tough-pla_0.2mm_quick.inst.cfg index 4f75b631df..908ecae7ed 100644 --- a/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_tough-pla_0.2mm_quick.inst.cfg +++ b/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_tough-pla_0.2mm_quick.inst.cfg @@ -16,7 +16,12 @@ cool_min_layer_time = 5 cool_min_layer_time_overhang = 9 cool_min_speed = 6 cool_min_temperature = =material_print_temperature - 15 +gradual_flow_enable = False +hole_xy_offset = 0.075 +inset_direction = outside-in +speed_wall = =speed_print speed_wall_x = =speed_print speed_wall_x_roofing = =speed_wall wall_line_width_x = =wall_line_width +xy_offset = 0.075 diff --git a/resources/intent/ultimaker_s8/um_s8_cc_plus_0.4_cpe-plus_0.2mm_engineering.inst.cfg b/resources/intent/ultimaker_s8/um_s8_cc_plus_0.4_cpe-plus_0.2mm_engineering.inst.cfg index 832912a022..0252cd6eb5 100644 --- a/resources/intent/ultimaker_s8/um_s8_cc_plus_0.4_cpe-plus_0.2mm_engineering.inst.cfg +++ b/resources/intent/ultimaker_s8/um_s8_cc_plus_0.4_cpe-plus_0.2mm_engineering.inst.cfg @@ -13,7 +13,10 @@ type = intent variant = CC+ 0.4 [values] +hole_xy_offset = 0.075 infill_sparse_density = 20 +inset_direction = outside-in top_bottom_thickness = =wall_thickness wall_thickness = =line_width * 4 +xy_offset = 0.075 diff --git a/resources/intent/ultimaker_s8/um_s8_cc_plus_0.4_nylon-cf-slide_0.2mm_engineering.inst.cfg b/resources/intent/ultimaker_s8/um_s8_cc_plus_0.4_nylon-cf-slide_0.2mm_engineering.inst.cfg index a0e65969e9..2ce40b3df1 100644 --- a/resources/intent/ultimaker_s8/um_s8_cc_plus_0.4_nylon-cf-slide_0.2mm_engineering.inst.cfg +++ b/resources/intent/ultimaker_s8/um_s8_cc_plus_0.4_nylon-cf-slide_0.2mm_engineering.inst.cfg @@ -13,7 +13,10 @@ type = intent variant = CC+ 0.4 [values] +hole_xy_offset = 0.075 infill_sparse_density = 20 +inset_direction = outside-in top_bottom_thickness = =wall_thickness wall_thickness = =line_width * 4 +xy_offset = 0.075 diff --git a/resources/intent/ultimaker_s8/um_s8_cc_plus_0.4_pc_0.2mm_engineering.inst.cfg b/resources/intent/ultimaker_s8/um_s8_cc_plus_0.4_pc_0.2mm_engineering.inst.cfg index f40d2509b6..cb3c7bbac2 100644 --- a/resources/intent/ultimaker_s8/um_s8_cc_plus_0.4_pc_0.2mm_engineering.inst.cfg +++ b/resources/intent/ultimaker_s8/um_s8_cc_plus_0.4_pc_0.2mm_engineering.inst.cfg @@ -13,7 +13,10 @@ type = intent variant = CC+ 0.4 [values] +hole_xy_offset = 0.075 infill_sparse_density = 20 +inset_direction = outside-in top_bottom_thickness = =wall_thickness wall_thickness = =line_width * 4 +xy_offset = 0.075 diff --git a/resources/intent/ultimaker_s8/um_s8_cc_plus_0.4_petcf_0.2mm_engineering.inst.cfg b/resources/intent/ultimaker_s8/um_s8_cc_plus_0.4_petcf_0.2mm_engineering.inst.cfg index 824018a1d5..706c77e91a 100644 --- a/resources/intent/ultimaker_s8/um_s8_cc_plus_0.4_petcf_0.2mm_engineering.inst.cfg +++ b/resources/intent/ultimaker_s8/um_s8_cc_plus_0.4_petcf_0.2mm_engineering.inst.cfg @@ -13,7 +13,10 @@ type = intent variant = CC+ 0.4 [values] +hole_xy_offset = 0.075 infill_sparse_density = 20 +inset_direction = outside-in top_bottom_thickness = =wall_thickness wall_thickness = =line_width * 4 +xy_offset = 0.075 diff --git a/resources/intent/ultimaker_s8/um_s8_cc_plus_0.6_nylon-cf-slide_0.2mm_engineering.inst.cfg b/resources/intent/ultimaker_s8/um_s8_cc_plus_0.6_nylon-cf-slide_0.2mm_engineering.inst.cfg index 8cbb513108..57dfaa8f45 100644 --- a/resources/intent/ultimaker_s8/um_s8_cc_plus_0.6_nylon-cf-slide_0.2mm_engineering.inst.cfg +++ b/resources/intent/ultimaker_s8/um_s8_cc_plus_0.6_nylon-cf-slide_0.2mm_engineering.inst.cfg @@ -12,7 +12,10 @@ type = intent variant = CC+ 0.6 [values] +hole_xy_offset = 0.075 infill_sparse_density = 20 +inset_direction = outside-in top_bottom_thickness = =wall_thickness wall_thickness = =line_width * 4 +xy_offset = 0.075 diff --git a/resources/intent/ultimaker_s8/um_s8_cc_plus_0.6_petcf_0.2mm_engineering.inst.cfg b/resources/intent/ultimaker_s8/um_s8_cc_plus_0.6_petcf_0.2mm_engineering.inst.cfg index 5384f380ac..9f2ddc6be5 100644 --- a/resources/intent/ultimaker_s8/um_s8_cc_plus_0.6_petcf_0.2mm_engineering.inst.cfg +++ b/resources/intent/ultimaker_s8/um_s8_cc_plus_0.6_petcf_0.2mm_engineering.inst.cfg @@ -12,7 +12,10 @@ type = intent variant = CC+ 0.6 [values] +hole_xy_offset = 0.075 infill_sparse_density = 20 +inset_direction = outside-in top_bottom_thickness = =wall_thickness wall_thickness = =line_width * 4 +xy_offset = 0.075 diff --git a/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_abs_0.2mm.inst.cfg b/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_abs_0.2mm.inst.cfg index cc5e850220..014a2012c8 100644 --- a/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_abs_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_abs_0.2mm.inst.cfg @@ -15,9 +15,13 @@ weight = -2 cool_min_layer_time = 4 cool_min_layer_time_fan_speed_max = 9 cool_min_temperature = =material_print_temperature - 20 +hole_xy_offset = 0.1 +inset_direction = inside-out retraction_prime_speed = 15 +speed_roofing = =speed_topbottom * 1/3 speed_wall_x = =speed_wall speed_wall_x_roofing = =speed_wall * 0.8 support_structure = tree wall_line_width_x = =wall_line_width * 1.25 +xy_offset = 0.025 diff --git a/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_petg_0.2mm.inst.cfg b/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_petg_0.2mm.inst.cfg index 9abcd5ddd2..9e9320d45d 100644 --- a/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_petg_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_petg_0.2mm.inst.cfg @@ -13,9 +13,13 @@ weight = -2 [values] cool_min_layer_time = 4 +hole_xy_offset = 0.1 +inset_direction = inside-out material_print_temperature = =default_material_print_temperature + 5 retraction_prime_speed = 15 +speed_roofing = =speed_topbottom * 1/3 speed_wall_x = =speed_wall speed_wall_x_roofing = =speed_wall * 0.8 wall_line_width_x = =wall_line_width * 1.25 +xy_offset = 0.025 diff --git a/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_pla_0.15mm.inst.cfg b/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_pla_0.15mm.inst.cfg index 9feab61e0e..a63f0371b4 100644 --- a/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_pla_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_pla_0.15mm.inst.cfg @@ -13,11 +13,15 @@ weight = -1 [values] cool_min_temperature = =material_print_temperature - 20 +hole_xy_offset = 0.1 +inset_direction = inside-out material_final_print_temperature = =material_print_temperature - 15 material_initial_print_temperature = =material_print_temperature - 15 retraction_prime_speed = =retraction_speed +speed_roofing = =speed_topbottom * 1/3 speed_wall_x = =speed_wall speed_wall_x_roofing = =speed_wall * 0.8 support_structure = tree wall_line_width_x = =wall_line_width * 1.25 +xy_offset = 0.025 diff --git a/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_pla_0.1mm.inst.cfg b/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_pla_0.1mm.inst.cfg index 8431bb9c43..b9ed1a649a 100644 --- a/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_pla_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_pla_0.1mm.inst.cfg @@ -13,12 +13,16 @@ weight = 0 [values] cool_min_temperature = =material_print_temperature - 20 +hole_xy_offset = 0.1 +inset_direction = inside-out material_final_print_temperature = =material_print_temperature - 15 material_initial_print_temperature = =material_print_temperature - 15 retraction_prime_speed = =retraction_speed +speed_roofing = =speed_topbottom * 1/3 speed_wall_x = =speed_wall speed_wall_x_roofing = =speed_wall * 0.8 support_structure = tree top_bottom_thickness = =round(6*layer_height,3) wall_line_width_x = =wall_line_width * 1.25 +xy_offset = 0.025 diff --git a/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_pla_0.2mm.inst.cfg index 7a5d19dc2c..8ab383a08d 100644 --- a/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_pla_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_pla_0.2mm.inst.cfg @@ -13,11 +13,15 @@ weight = -2 [values] cool_min_temperature = =material_print_temperature - 20 +hole_xy_offset = 0.1 +inset_direction = inside-out material_final_print_temperature = =material_print_temperature - 15 material_initial_print_temperature = =material_print_temperature - 15 retraction_prime_speed = =retraction_speed +speed_roofing = =speed_topbottom * 1/3 speed_wall_x = =speed_wall speed_wall_x_roofing = =speed_wall * 0.8 support_structure = tree wall_line_width_x = =wall_line_width * 1.25 +xy_offset = 0.025 diff --git a/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_tough-pla_0.15mm.inst.cfg b/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_tough-pla_0.15mm.inst.cfg index f17d3fde40..2f48c95b7b 100644 --- a/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_tough-pla_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_tough-pla_0.15mm.inst.cfg @@ -13,10 +13,14 @@ weight = -1 [values] cool_min_temperature = =material_print_temperature - 20 +hole_xy_offset = 0.1 +inset_direction = inside-out retraction_prime_speed = =retraction_speed retraction_speed = 25 +speed_roofing = =speed_topbottom * 1/3 speed_wall_x = =speed_wall speed_wall_x_roofing = =speed_wall * 0.8 support_structure = tree wall_line_width_x = =wall_line_width * 1.25 +xy_offset = 0.025 diff --git a/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_tough-pla_0.1mm.inst.cfg b/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_tough-pla_0.1mm.inst.cfg index 672eae3e4a..d32f2466ea 100644 --- a/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_tough-pla_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_tough-pla_0.1mm.inst.cfg @@ -13,10 +13,14 @@ weight = 0 [values] cool_min_temperature = =material_print_temperature - 20 +hole_xy_offset = 0.1 +inset_direction = inside-out retraction_prime_speed = =retraction_speed +speed_roofing = =speed_topbottom * 1/3 speed_wall_x = =speed_wall speed_wall_x_roofing = =speed_wall * 0.8 support_structure = tree top_bottom_thickness = =round(6*layer_height,3) wall_line_width_x = =wall_line_width * 1.25 +xy_offset = 0.025 diff --git a/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_tough-pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_tough-pla_0.2mm.inst.cfg index 716765aac5..a7eebb69be 100644 --- a/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_tough-pla_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_tough-pla_0.2mm.inst.cfg @@ -13,9 +13,13 @@ weight = -2 [values] cool_min_temperature = =material_print_temperature - 20 +hole_xy_offset = 0.1 +inset_direction = inside-out retraction_prime_speed = =retraction_speed +speed_roofing = =speed_topbottom * 1/3 speed_wall_x = =speed_wall speed_wall_x_roofing = =speed_wall * 0.8 support_structure = tree wall_line_width_x = =wall_line_width * 1.25 +xy_offset = 0.025 diff --git a/resources/quality/ultimaker_s8/um_s8_cc_plus_0.4_nylon-cf-slide_0.2mm.inst.cfg b/resources/quality/ultimaker_s8/um_s8_cc_plus_0.4_nylon-cf-slide_0.2mm.inst.cfg index 5f3180ef4e..04249a0af3 100644 --- a/resources/quality/ultimaker_s8/um_s8_cc_plus_0.4_nylon-cf-slide_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s8/um_s8_cc_plus_0.4_nylon-cf-slide_0.2mm.inst.cfg @@ -13,12 +13,41 @@ variant = CC+ 0.4 weight = -2 [values] +acceleration_roofing = =acceleration_topbottom/2 +bridge_enable_more_layers = True +bridge_skin_density = 70 bridge_skin_material_flow = 100 +bridge_skin_material_flow_2 = 70 bridge_skin_speed = 30 +bridge_skin_speed_2 = =speed_print*2/3 bridge_wall_material_flow = 100 +bridge_wall_min_length = 2 bridge_wall_speed = 30 +cool_min_layer_time = 6 cool_min_layer_time_fan_speed_max = 11 -retraction_prime_speed = 15 +cool_min_layer_time_overhang = 11 +cool_min_temperature = =material_print_temperature-10 +flooring_monotonic = False +infill_material_flow = =material_flow if infill_sparse_density < 95 else 95 +infill_pattern = ='zigzag' if infill_sparse_density > 50 else 'grid' +jerk_roofing = =jerk_print +material_flow = 95 +retraction_hop_enabled = False +retraction_prime_speed = 25 +roofing_material_flow = =skin_material_flow +roofing_monotonic = False +skin_material_flow = =0.95*material_flow +skin_outline_count = 0 +support_bottom_distance = =support_z_distance support_structure = tree +support_tree_tip_diameter = 2.0 +support_tree_top_rate = 10 +support_xy_distance = 1.2 +support_xy_distance_overhang = =1.5*machine_nozzle_size +support_z_distance = =min(2*layer_height, 0.4) +top_bottom_thickness = =wall_thickness +wall_0_inset = =0.05 wall_overhang_speed_factors = [100,90,80,70,60,50] +wall_x_material_flow = =material_flow +xy_offset = 0.075 diff --git a/resources/quality/ultimaker_s8/um_s8_cc_plus_0.4_petcf_0.2mm.inst.cfg b/resources/quality/ultimaker_s8/um_s8_cc_plus_0.4_petcf_0.2mm.inst.cfg index 3467ed5ded..664748835f 100644 --- a/resources/quality/ultimaker_s8/um_s8_cc_plus_0.4_petcf_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s8/um_s8_cc_plus_0.4_petcf_0.2mm.inst.cfg @@ -13,12 +13,43 @@ variant = CC+ 0.4 weight = -2 [values] +acceleration_roofing = =acceleration_topbottom/2 adhesion_type = skirt +bridge_enable_more_layers = True +bridge_skin_density = 70 bridge_skin_material_flow = 100 +bridge_skin_material_flow_2 = 70 bridge_skin_speed = 30 +bridge_skin_speed_2 = =speed_print*2/3 bridge_wall_material_flow = 100 +bridge_wall_min_length = 2 bridge_wall_speed = 30 +cool_min_layer_time = 6 +cool_min_layer_time_overhang = 11 +cool_min_temperature = =material_print_temperature-10 +flooring_monotonic = False +infill_material_flow = =material_flow if infill_sparse_density < 95 else 95 +infill_pattern = ='zigzag' if infill_sparse_density > 50 else 'grid' +jerk_roofing = =jerk_print +material_pressure_advance_factor = 0.25 +retraction_hop_enabled = False +retraction_prime_speed = 15 +roofing_material_flow = =skin_material_flow +roofing_monotonic = False +skin_material_flow = =0.95*material_flow +skin_outline_count = 0 +skirt_height = 5 +support_bottom_distance = =support_z_distance support_structure = tree +support_tree_tip_diameter = 2.0 +support_tree_top_rate = 10 +support_xy_distance = 1.2 +support_xy_distance_overhang = =1.5*machine_nozzle_size +support_z_distance = =min(2*layer_height, 0.4) switch_extruder_retraction_amount = 16 +top_bottom_thickness = =wall_thickness +wall_0_inset = =0.05 wall_overhang_speed_factors = [100,90,80,70,60,50] +wall_x_material_flow = =material_flow +xy_offset = 0.075 diff --git a/resources/themes/cura-light/theme.json b/resources/themes/cura-light/theme.json index 436aaceb3c..d561f7e6dc 100644 --- a/resources/themes/cura-light/theme.json +++ b/resources/themes/cura-light/theme.json @@ -463,6 +463,8 @@ "layerview_support_infill": [0, 230, 230, 127], "layerview_move_combing": [0, 0, 255, 255], "layerview_move_retraction": [128, 127, 255, 255], + "layerview_move_while_retracting": [127, 255, 255, 255], + "layerview_move_while_unretracting": [255, 127, 255, 255], "layerview_support_interface": [63, 127, 255, 127], "layerview_prime_tower": [0, 255, 255, 255], "layerview_nozzle": [224, 192, 16, 64],