Add PP profiles

These are copied from the materials team and should now be optimised.

Contributes to issue CURA-3960.

resources/quality/ultimaker3/um3_aa0.4_PP_Draft_Print.inst.cfg

@@ -0,0 +1,107 @@
+[general]
+version = 2
+name = Fast
+definition = ultimaker3
+
+[metadata]
+type = quality
+quality_type = draft
+material = generic_pp_ultimaker3_AA_0.4
+weight = -2
+setting_version = 1
+
+[values]
+acceleration_enabled = True
+acceleration_infill = =acceleration_print
+acceleration_layer_0 = =acceleration_topbottom
+acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
+acceleration_print = 4000
+acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
+acceleration_support_infill = =acceleration_support
+acceleration_support_interface = =acceleration_topbottom
+acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
+acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
+acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
+acceleration_wall_x = =acceleration_wall
+adhesion_type = brim
+brim_width = 20
+cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
+cool_fan_speed = 20
+cool_fan_speed_max = 100
+cool_min_layer_time = 7
+cool_min_layer_time_fan_speed_max = 7
+cool_min_speed = 2.5
+infill_line_width = =round(line_width * 0.38 / 0.38, 2)
+infill_overlap = 0
+infill_pattern = tetrahedral
+infill_sparse_density = 20
+infill_wipe_dist = 0.1
+jerk_enabled = True
+jerk_infill = =jerk_print
+jerk_layer_0 = =jerk_topbottom
+jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
+jerk_print = 25
+jerk_support = =math.ceil(jerk_print * 15 / 25)
+jerk_support_infill = =jerk_support
+jerk_support_interface = =jerk_topbottom
+jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
+jerk_wall = =math.ceil(jerk_print * 10 / 25)
+jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
+jerk_wall_x = =jerk_wall
+layer_height = 0.2
+layer_height_0 = =round(machine_nozzle_size / 1.5, 2)
+line_width = =machine_nozzle_size * 0.95
+machine_min_cool_heat_time_window = 15
+machine_nozzle_cool_down_speed = 0.85
+machine_nozzle_heat_up_speed = 1.5
+material_bed_temperature = 85
+material_bed_temperature_layer_0 = 90
+material_final_print_temperature = 205
+material_flow = 100
+material_initial_print_temperature = 210
+material_print_temperature = 215
+material_print_temperature_layer_0 = 220
+material_standby_temperature = 100
+multiple_mesh_overlap = 0
+prime_tower_enable = False
+prime_tower_size = 16
+prime_tower_wipe_enabled = True
+retraction_amount = 6.5
+retraction_count_max = 12
+retraction_extra_prime_amount = 0.8
+retraction_extrusion_window = 1
+retraction_hop = 2
+retraction_hop_enabled = True
+retraction_hop_only_when_collides = True
+retraction_min_travel = 0.8
+retraction_prime_speed = 18
+retraction_speed = 35
+skin_overlap = 15
+speed_equalize_flow_enabled = True
+speed_infill = =speed_print
+speed_layer_0 = 15
+speed_prime_tower = =speed_topbottom
+speed_print = 25
+speed_support = =speed_wall_0
+speed_support_interface = =speed_topbottom
+speed_topbottom = =math.ceil(speed_print * 25 / 25)
+speed_travel = 300
+speed_travel_layer_0 = 50
+speed_wall = =math.ceil(speed_print * 25 / 25)
+speed_wall_0 = =math.ceil(speed_wall * 25 / 25)
+speed_wall_x = =speed_wall
+support_angle = 50
+support_bottom_distance = =support_z_distance / 2
+support_top_distance = =support_z_distance
+support_xy_distance = =wall_line_width_0 * 2.5
+support_xy_distance_overhang = =wall_line_width_0
+support_z_distance = =layer_height * 2
+switch_extruder_prime_speed = 15
+switch_extruder_retraction_amount = 20
+switch_extruder_retraction_speeds = 35
+top_bottom_thickness = 1.2
+travel_avoid_distance = 3
+travel_compensate_overlapping_walls_enabled = True
+wall_0_inset = 0
+wall_line_width_x = =line_width
+wall_thickness = =line_width * 3

resources/quality/ultimaker3/um3_aa0.4_PP_Fast_Print.inst.cfg

@@ -0,0 +1,107 @@
+[general]
+version = 2
+name = Normal
+definition = ultimaker3
+
+[metadata]
+type = quality
+quality_type = fast
+material = generic_pp_ultimaker3_AA_0.4
+weight = -1
+setting_version = 1
+
+[values]
+acceleration_enabled = True
+acceleration_infill = =acceleration_print
+acceleration_layer_0 = =acceleration_topbottom
+acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
+acceleration_print = 4000
+acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
+acceleration_support_infill = =acceleration_support
+acceleration_support_interface = =acceleration_topbottom
+acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
+acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
+acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
+acceleration_wall_x = =acceleration_wall
+adhesion_type = brim
+brim_width = 20
+cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
+cool_fan_speed = 20
+cool_fan_speed_max = 100
+cool_min_layer_time = 7
+cool_min_layer_time_fan_speed_max = 7
+cool_min_speed = 2.5
+infill_line_width = =round(line_width * 0.38 / 0.38, 2)
+infill_overlap = 0
+infill_pattern = tetrahedral
+infill_sparse_density = 20
+infill_wipe_dist = 0.1
+jerk_enabled = True
+jerk_infill = =jerk_print
+jerk_layer_0 = =jerk_topbottom
+jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
+jerk_print = 25
+jerk_support = =math.ceil(jerk_print * 15 / 25)
+jerk_support_infill = =jerk_support
+jerk_support_interface = =jerk_topbottom
+jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
+jerk_wall = =math.ceil(jerk_print * 10 / 25)
+jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
+jerk_wall_x = =jerk_wall
+layer_height = 0.15
+layer_height_0 = =round(machine_nozzle_size / 1.5, 2)
+line_width = =machine_nozzle_size * 0.95
+machine_min_cool_heat_time_window = 15
+machine_nozzle_cool_down_speed = 0.85
+machine_nozzle_heat_up_speed = 1.5
+material_bed_temperature = 85
+material_bed_temperature_layer_0 = 90
+material_final_print_temperature = 195
+material_flow = 100
+material_initial_print_temperature = 205
+material_print_temperature = 207
+material_print_temperature_layer_0 = 210
+material_standby_temperature = 100
+multiple_mesh_overlap = 0
+prime_tower_enable = False
+prime_tower_size = 16
+prime_tower_wipe_enabled = True
+retraction_amount = 7
+retraction_count_max = 12
+retraction_extra_prime_amount = 0.8
+retraction_extrusion_window = 1
+retraction_hop = 2
+retraction_hop_enabled = True
+retraction_hop_only_when_collides = True
+retraction_min_travel = 0.8
+retraction_prime_speed = 18
+retraction_speed = 35
+skin_overlap = 15
+speed_equalize_flow_enabled = True
+speed_infill = =speed_print
+speed_layer_0 = 15
+speed_prime_tower = =speed_topbottom
+speed_print = 25
+speed_support = =speed_wall_0
+speed_support_interface = =speed_topbottom
+speed_topbottom = =math.ceil(speed_print * 25 / 25)
+speed_travel = 300
+speed_travel_layer_0 = 50
+speed_wall = =math.ceil(speed_print * 25 / 25)
+speed_wall_0 = =math.ceil(speed_wall * 25 / 25)
+speed_wall_x = =speed_wall
+support_angle = 50
+support_bottom_distance = =support_z_distance / 2
+support_top_distance = =support_z_distance
+support_xy_distance = =wall_line_width_0 * 2.5
+support_xy_distance_overhang = =wall_line_width_0
+support_z_distance = =layer_height * 2
+switch_extruder_prime_speed = 15
+switch_extruder_retraction_amount = 20
+switch_extruder_retraction_speeds = 35
+top_bottom_thickness = 1.1
+travel_avoid_distance = 3
+travel_compensate_overlapping_walls_enabled = True
+wall_0_inset = 0
+wall_line_width_x = =line_width
+wall_thickness = =line_width * 3

resources/quality/ultimaker3/um3_aa0.4_PP_Normal_Quality.inst.cfg

@@ -0,0 +1,107 @@
+[general]
+version = 2
+name = Fine
+definition = ultimaker3
+
+[metadata]
+type = quality
+quality_type = normal
+material = generic_pp_ultimaker3_AA_0.4
+weight = 0
+setting_version = 1
+
+[values]
+acceleration_enabled = True
+acceleration_infill = =acceleration_print
+acceleration_layer_0 = =acceleration_topbottom
+acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
+acceleration_print = 4000
+acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
+acceleration_support_infill = =acceleration_support
+acceleration_support_interface = =acceleration_topbottom
+acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
+acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
+acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
+acceleration_wall_x = =acceleration_wall
+adhesion_type = brim
+brim_width = 20
+cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
+cool_fan_speed = 20
+cool_fan_speed_max = 100
+cool_min_layer_time = 7
+cool_min_layer_time_fan_speed_max = 7
+cool_min_speed = 2.5
+infill_line_width = =round(line_width * 0.38 / 0.38, 2)
+infill_overlap = 0
+infill_pattern = tetrahedral
+infill_sparse_density = 20
+infill_wipe_dist = 0.1
+jerk_enabled = True
+jerk_infill = =jerk_print
+jerk_layer_0 = =jerk_topbottom
+jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
+jerk_print = 25
+jerk_support = =math.ceil(jerk_print * 15 / 25)
+jerk_support_infill = =jerk_support
+jerk_support_interface = =jerk_topbottom
+jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
+jerk_wall = =math.ceil(jerk_print * 10 / 25)
+jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
+jerk_wall_x = =jerk_wall
+layer_height = 0.1
+layer_height_0 = =round(machine_nozzle_size / 1.5, 2)
+line_width = =machine_nozzle_size * 0.95
+machine_min_cool_heat_time_window = 15
+machine_nozzle_cool_down_speed = 0.85
+machine_nozzle_heat_up_speed = 1.5
+material_bed_temperature = 85
+material_bed_temperature_layer_0 = 90
+material_final_print_temperature = 195
+material_flow = 100
+material_initial_print_temperature = 200
+material_print_temperature = 205
+material_print_temperature_layer_0 = 208
+material_standby_temperature = 100
+multiple_mesh_overlap = 0
+prime_tower_enable = False
+prime_tower_size = 16
+prime_tower_wipe_enabled = True
+retraction_amount = 7
+retraction_count_max = 12
+retraction_extra_prime_amount = 0.8
+retraction_extrusion_window = 1
+retraction_hop = 2
+retraction_hop_enabled = True
+retraction_hop_only_when_collides = True
+retraction_min_travel = 0.8
+retraction_prime_speed = 18
+retraction_speed = 35
+skin_overlap = 15
+speed_equalize_flow_enabled = True
+speed_infill = =speed_print
+speed_layer_0 = 15
+speed_prime_tower = =speed_topbottom
+speed_print = 25
+speed_support = =speed_wall_0
+speed_support_interface = =speed_topbottom
+speed_topbottom = =math.ceil(speed_print * 25 / 25)
+speed_travel = 300
+speed_travel_layer_0 = 50
+speed_wall = =math.ceil(speed_print * 25 / 25)
+speed_wall_0 = =math.ceil(speed_wall * 25 / 25)
+speed_wall_x = =speed_wall
+support_angle = 50
+support_bottom_distance = =support_z_distance / 2
+support_top_distance = =support_z_distance
+support_xy_distance = =wall_line_width_0 * 2.5
+support_xy_distance_overhang = =wall_line_width_0
+support_z_distance = =layer_height * 2
+switch_extruder_prime_speed = 15
+switch_extruder_retraction_amount = 20
+switch_extruder_retraction_speeds = 35
+top_bottom_thickness = 1
+travel_avoid_distance = 3
+travel_compensate_overlapping_walls_enabled = True
+wall_0_inset = 0
+wall_line_width_x = =line_width
+wall_thickness = =line_width * 3

resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg

@@ -0,0 +1,63 @@
+[general]
+version = 2
+name = Fast
+definition = ultimaker3
+
+[metadata]
+type = quality
+quality_type = draft
+material = generic_pp_ultimaker3_AA_0.8
+weight = -2
+setting_version = 1
+
+[values]
+brim_width = 25
+cool_fan_speed = 10
+cool_min_layer_time_fan_speed_max = 6
+cool_min_speed = 17
+expand_skins_expand_distance = =line_width * 2
+expand_skins_into_infill = True
+expand_upper_skins = True
+infill_before_walls = True
+infill_line_width = =round(line_width * 0.7 / 0.8, 2)
+infill_pattern = tetrahedral
+infill_sparse_density = 20
+jerk_prime_tower = =math.ceil(jerk_print * 25 / 25)
+jerk_support = =math.ceil(jerk_print * 25 / 25)
+jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25)
+material_bed_temperature_layer_0 = =material_bed_temperature
+material_flow = 100
+material_print_temperature = =default_material_print_temperature - 2
+material_print_temperature_layer_0 = =default_material_print_temperature + 2
+material_standby_temperature = 100
+multiple_mesh_overlap = 0.2
+prime_tower_enable = True
+prime_tower_flow = 100
+prime_tower_wall_thickness = =prime_tower_line_width * 2
+retract_at_layer_change = False
+retraction_count_max = 12
+retraction_extra_prime_amount = 0.5
+retraction_hop = 0.5
+retraction_hop_only_when_collides = True
+retraction_min_travel = 1.5
+retraction_prime_speed = 15
+skin_line_width = =round(line_width * 0.78 / 0.8, 2)
+skin_overlap = 5
+speed_print = 35
+speed_topbottom = =math.ceil(speed_print * 25 / 35)
+speed_travel = 300
+speed_wall = =math.ceil(speed_print * 30 / 35)
+speed_wall_x = =math.ceil(speed_wall * 30 / 30)
+support_angle = 60
+support_bottom_distance = =support_z_distance
+support_line_width = =round(line_width * 0.7 / 0.8, 2)
+support_offset = =line_width
+switch_extruder_prime_speed = 15
+switch_extruder_retraction_amount = 20
+switch_extruder_retraction_speeds = 45
+top_bottom_thickness = 1.6
+travel_compensate_overlapping_walls_0_enabled = False
+wall_0_wipe_dist = =line_width * 2
+wall_line_width_x = =round(line_width * 0.8 / 0.8, 2)
+wall_thickness = 1.6
+

resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg

@@ -0,0 +1,63 @@
+[general]
+version = 2
+name = Sprint
+definition = ultimaker3
+
+[metadata]
+type = quality
+quality_type = superdraft
+material = generic_pp_ultimaker3_AA_0.8
+weight = -4
+setting_version = 1
+
+[values]
+brim_width = 25
+cool_fan_speed = 10
+cool_min_layer_time_fan_speed_max = 6
+cool_min_speed = 17
+expand_skins_expand_distance = =line_width * 2
+expand_skins_into_infill = True
+expand_upper_skins = True
+infill_before_walls = True
+infill_line_width = =round(line_width * 0.7 / 0.8, 2)
+infill_pattern = tetrahedral
+infill_sparse_density = 20
+jerk_prime_tower = =math.ceil(jerk_print * 25 / 25)
+jerk_support = =math.ceil(jerk_print * 25 / 25)
+jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25)
+material_bed_temperature_layer_0 = =material_bed_temperature
+material_flow = 100
+material_print_temperature = =default_material_print_temperature + 2
+material_print_temperature_layer_0 = =default_material_print_temperature + 2
+material_standby_temperature = 100
+multiple_mesh_overlap = 0.2
+prime_tower_enable = True
+prime_tower_flow = 100
+prime_tower_wall_thickness = =prime_tower_line_width * 2
+retract_at_layer_change = False
+retraction_count_max = 12
+retraction_extra_prime_amount = 0.5
+retraction_hop = 0.5
+retraction_hop_only_when_collides = True
+retraction_min_travel = 1.5
+retraction_prime_speed = 15
+skin_line_width = =round(line_width * 0.78 / 0.8, 2)
+skin_overlap = 5
+speed_print = 35
+speed_topbottom = =math.ceil(speed_print * 25 / 35)
+speed_travel = 300
+speed_wall = =math.ceil(speed_print * 30 / 35)
+speed_wall_x = =math.ceil(speed_wall * 30 / 30)
+support_angle = 60
+support_bottom_distance = =support_z_distance
+support_line_width = =round(line_width * 0.7 / 0.8, 2)
+support_offset = =line_width
+switch_extruder_prime_speed = 15
+switch_extruder_retraction_amount = 20
+switch_extruder_retraction_speeds = 45
+top_bottom_thickness = 1.6
+travel_compensate_overlapping_walls_0_enabled = False
+wall_0_wipe_dist = =line_width * 2
+wall_line_width_x = =round(line_width * 0.8 / 0.8, 2)
+wall_thickness = 1.6
+

resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg

@@ -0,0 +1,63 @@
+[general]
+version = 2
+name = Extra Fast
+definition = ultimaker3
+
+[metadata]
+type = quality
+quality_type = verydraft
+material = generic_pp_ultimaker3_AA_0.8
+weight = -3
+setting_version = 1
+
+[values]
+brim_width = 25
+cool_fan_speed = 10
+cool_min_layer_time_fan_speed_max = 6
+cool_min_speed = 17
+expand_skins_expand_distance = =line_width * 2
+expand_skins_into_infill = True
+expand_upper_skins = True
+infill_before_walls = True
+infill_line_width = =round(line_width * 0.7 / 0.8, 2)
+infill_pattern = tetrahedral
+infill_sparse_density = 20
+jerk_prime_tower = =math.ceil(jerk_print * 25 / 25)
+jerk_support = =math.ceil(jerk_print * 25 / 25)
+jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25)
+layer_height = 0.3
+material_bed_temperature_layer_0 = =material_bed_temperature
+material_flow = 100
+material_print_temperature_layer_0 = =default_material_print_temperature + 2
+material_standby_temperature = 100
+multiple_mesh_overlap = 0.2
+prime_tower_enable = True
+prime_tower_flow = 100
+prime_tower_wall_thickness = =prime_tower_line_width * 2
+retract_at_layer_change = False
+retraction_count_max = 12
+retraction_extra_prime_amount = 0.5
+retraction_hop = 0.5
+retraction_hop_only_when_collides = True
+retraction_min_travel = 1.5
+retraction_prime_speed = 15
+skin_line_width = =round(line_width * 0.78 / 0.8, 2)
+skin_overlap = 5
+speed_print = 35
+speed_topbottom = =math.ceil(speed_print * 25 / 35)
+speed_travel = 300
+speed_wall = =math.ceil(speed_print * 30 / 35)
+speed_wall_x = =math.ceil(speed_wall * 30 / 30)
+support_angle = 60
+support_bottom_distance = =support_z_distance
+support_line_width = =round(line_width * 0.7 / 0.8, 2)
+support_offset = =line_width
+switch_extruder_prime_speed = 15
+switch_extruder_retraction_amount = 20
+switch_extruder_retraction_speeds = 45
+top_bottom_thickness = 1.6
+travel_compensate_overlapping_walls_0_enabled = False
+wall_0_wipe_dist = =line_width * 2
+wall_line_width_x = =round(line_width * 0.8 / 0.8, 2)
+wall_thickness = 1.6
+