diff --git a/resources/quality/ultimaker3/um3_aa0.25_ABS_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.25_ABS_Normal_Quality.inst.cfg index 8b3691007f..60a1d80a3c 100644 --- a/resources/quality/ultimaker3/um3_aa0.25_ABS_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.25_ABS_Normal_Quality.inst.cfg @@ -14,6 +14,7 @@ weight = 0 [values] cool_fan_speed = 40 infill_overlap = =0 if infill_sparse_density > 80 else 15 +material_print_temperature = =default_material_print_temperature - 20 retraction_prime_speed = 25 speed_topbottom = =math.ceil(speed_print * 30 / 55) diff --git a/resources/quality/ultimaker3/um3_aa0.25_CPE_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.25_CPE_Normal_Quality.inst.cfg index af1361012e..80339723e2 100644 --- a/resources/quality/ultimaker3/um3_aa0.25_CPE_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.25_CPE_Normal_Quality.inst.cfg @@ -12,6 +12,7 @@ variant = AA 0.25 weight = 0 [values] +material_print_temperature = =default_material_print_temperature - 15 speed_infill = =math.ceil(speed_print * 40 / 55) speed_topbottom = =math.ceil(speed_print * 30 / 55) top_bottom_thickness = 0.8 diff --git a/resources/quality/ultimaker3/um3_aa0.25_Nylon_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.25_Nylon_Normal_Quality.inst.cfg index 01ff2c06cb..6815ea04e1 100644 --- a/resources/quality/ultimaker3/um3_aa0.25_Nylon_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.25_Nylon_Normal_Quality.inst.cfg @@ -14,6 +14,7 @@ weight = 0 [values] machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 +material_print_temperature = =default_material_print_temperature - 20 ooze_shield_angle = 40 raft_airgap = 0.15 retraction_min_travel = 5 diff --git a/resources/quality/ultimaker3/um3_aa0.25_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.25_PC_Normal_Quality.inst.cfg index 40ced2d597..eeb924906f 100644 --- a/resources/quality/ultimaker3/um3_aa0.25_PC_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.25_PC_Normal_Quality.inst.cfg @@ -18,6 +18,7 @@ brim_width = 20 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_wipe_dist = 0.1 machine_min_cool_heat_time_window = 15 +material_print_temperature = =default_material_print_temperature - 10 multiple_mesh_overlap = 0 ooze_shield_angle = 40 prime_tower_enable = True diff --git a/resources/quality/ultimaker3/um3_aa0.25_PETG_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.25_PETG_Normal_Quality.inst.cfg index 143955118e..c0805a5854 100644 --- a/resources/quality/ultimaker3/um3_aa0.25_PETG_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.25_PETG_Normal_Quality.inst.cfg @@ -12,7 +12,7 @@ variant = AA 0.25 weight = 0 [values] -material_print_temperature = =default_material_print_temperature - 5 +material_print_temperature = =default_material_print_temperature - 15 retraction_combing = all speed_infill = =math.ceil(speed_print * 40 / 55) speed_topbottom = =math.ceil(speed_print * 30 / 55) diff --git a/resources/quality/ultimaker3/um3_aa0.25_PLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.25_PLA_Normal_Quality.inst.cfg index f3e0c2a226..529cb2deaf 100644 --- a/resources/quality/ultimaker3/um3_aa0.25_PLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.25_PLA_Normal_Quality.inst.cfg @@ -17,7 +17,7 @@ infill_overlap = =0 if infill_sparse_density > 80 else 10 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 -material_print_temperature = 190 +material_print_temperature = =default_material_print_temperature - 10 retraction_hop = 0.2 skin_overlap = 5 speed_print = 30 diff --git a/resources/quality/ultimaker3/um3_aa0.25_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.25_PP_Normal_Quality.inst.cfg index d92bd0fc01..a64c8298a2 100644 --- a/resources/quality/ultimaker3/um3_aa0.25_PP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.25_PP_Normal_Quality.inst.cfg @@ -19,7 +19,7 @@ infill_wipe_dist = 0.1 machine_min_cool_heat_time_window = 15 material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 10 -material_print_temperature = =default_material_print_temperature - 15 +material_print_temperature = =default_material_print_temperature - 2 multiple_mesh_overlap = 0 prime_tower_enable = False prime_tower_size = 16 diff --git a/resources/quality/ultimaker3/um3_aa0.25_TPLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.25_TPLA_Normal_Quality.inst.cfg index e5f179322f..0b6ae2320b 100644 --- a/resources/quality/ultimaker3/um3_aa0.25_TPLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.25_TPLA_Normal_Quality.inst.cfg @@ -17,7 +17,7 @@ infill_overlap = =0 if infill_sparse_density > 80 else 10 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 -material_print_temperature = =default_material_print_temperature - 15 +material_print_temperature = =default_material_print_temperature - 5 skin_overlap = 5 speed_print = 30 speed_topbottom = =math.ceil(speed_print * 20 / 30) diff --git a/resources/quality/ultimaker3/um3_aa0.4_ABS_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_ABS_Draft_Print.inst.cfg index c45711f591..16be0db845 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_ABS_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_ABS_Draft_Print.inst.cfg @@ -14,7 +14,7 @@ weight = -2 [values] machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 -material_print_temperature = =default_material_print_temperature + 10 +material_print_temperature = =default_material_print_temperature - 5 prime_tower_enable = False skin_overlap = 20 speed_print = 60 diff --git a/resources/quality/ultimaker3/um3_aa0.4_ABS_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_ABS_Fast_Print.inst.cfg index 31e1d618c5..916b283c9c 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_ABS_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_ABS_Fast_Print.inst.cfg @@ -14,7 +14,7 @@ weight = -1 [values] machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 -material_print_temperature = =default_material_print_temperature + 5 +material_print_temperature = =default_material_print_temperature - 10 prime_tower_enable = False speed_print = 60 speed_topbottom = =math.ceil(speed_print * 30 / 60) diff --git a/resources/quality/ultimaker3/um3_aa0.4_ABS_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_ABS_High_Quality.inst.cfg index 5a34221c3f..5dcbe80bbb 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_ABS_High_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_ABS_High_Quality.inst.cfg @@ -14,7 +14,7 @@ weight = 1 [values] machine_nozzle_cool_down_speed = 0.8 machine_nozzle_heat_up_speed = 1.5 -material_print_temperature = =default_material_print_temperature - 5 +material_print_temperature = =default_material_print_temperature - 20 prime_tower_enable = False speed_print = 50 speed_topbottom = =math.ceil(speed_print * 30 / 50) diff --git a/resources/quality/ultimaker3/um3_aa0.4_ABS_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_ABS_Normal_Quality.inst.cfg index e24f639e45..1420880995 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_ABS_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_ABS_Normal_Quality.inst.cfg @@ -14,6 +14,7 @@ weight = 0 [values] machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 +material_print_temperature = =default_material_print_temperature - 15 prime_tower_enable = False speed_print = 55 speed_topbottom = =math.ceil(speed_print * 30 / 55) diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Draft_Print.inst.cfg index d5de190eaa..5de59e58c9 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Draft_Print.inst.cfg @@ -17,7 +17,6 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_wipe_dist = 0 layer_height = 0.2 machine_min_cool_heat_time_window = 15 -material_print_temperature = =default_material_print_temperature + 10 multiple_mesh_overlap = 0 prime_tower_enable = True prime_tower_wipe_enabled = True diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Fast_Print.inst.cfg index 625ca038f4..b2020831d7 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Fast_Print.inst.cfg @@ -17,7 +17,6 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_wipe_dist = 0 layer_height = 0.15 machine_min_cool_heat_time_window = 15 -material_print_temperature = =default_material_print_temperature + 10 multiple_mesh_overlap = 0 prime_tower_enable = True prime_tower_wipe_enabled = True diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPEP_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPEP_High_Quality.inst.cfg index 670f6af244..4be3a9c13a 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_CPEP_High_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_CPEP_High_Quality.inst.cfg @@ -19,7 +19,7 @@ layer_height = 0.06 machine_min_cool_heat_time_window = 15 machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 -material_print_temperature = =default_material_print_temperature + 2 +material_print_temperature = =default_material_print_temperature - 8 multiple_mesh_overlap = 0 prime_tower_enable = True prime_tower_wipe_enabled = True diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Normal_Quality.inst.cfg index 3ae067ed7b..2e24f485d0 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Normal_Quality.inst.cfg @@ -18,7 +18,7 @@ infill_wipe_dist = 0 machine_min_cool_heat_time_window = 15 machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 -material_print_temperature = =default_material_print_temperature + 5 +material_print_temperature = =default_material_print_temperature - 5 multiple_mesh_overlap = 0 prime_tower_enable = True prime_tower_wipe_enabled = True diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPE_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPE_Draft_Print.inst.cfg index 0278f07805..6cfba34af9 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_CPE_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_CPE_Draft_Print.inst.cfg @@ -12,7 +12,7 @@ variant = AA 0.4 weight = -2 [values] -material_print_temperature = =default_material_print_temperature + 10 +material_print_temperature = =default_material_print_temperature + 5 skin_overlap = 20 speed_print = 60 speed_topbottom = =math.ceil(speed_print * 35 / 60) diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPE_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPE_Fast_Print.inst.cfg index 6bfa219c56..faa7730e2c 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_CPE_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_CPE_Fast_Print.inst.cfg @@ -12,7 +12,6 @@ variant = AA 0.4 weight = -1 [values] -material_print_temperature = =default_material_print_temperature + 5 speed_print = 60 speed_topbottom = =math.ceil(speed_print * 30 / 60) speed_wall = =math.ceil(speed_print * 40 / 60) diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPE_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPE_High_Quality.inst.cfg index d237d1def0..a4af986507 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_CPE_High_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_CPE_High_Quality.inst.cfg @@ -14,7 +14,7 @@ weight = 1 [values] machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 -material_print_temperature = =default_material_print_temperature - 5 +material_print_temperature = =default_material_print_temperature - 10 speed_print = 50 speed_topbottom = =math.ceil(speed_print * 30 / 50) speed_wall = =math.ceil(speed_print * 30 / 50) diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPE_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPE_Normal_Quality.inst.cfg index cbc754bdf3..de85c4aeac 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_CPE_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_CPE_Normal_Quality.inst.cfg @@ -14,6 +14,7 @@ weight = 0 [values] machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 +material_print_temperature = =default_material_print_temperature - 5 speed_print = 55 speed_topbottom = =math.ceil(speed_print * 30 / 55) speed_wall = =math.ceil(speed_print * 30 / 55) diff --git a/resources/quality/ultimaker3/um3_aa0.4_Nylon_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_Nylon_Draft_Print.inst.cfg index 498e061888..666aaef664 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_Nylon_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_Nylon_Draft_Print.inst.cfg @@ -13,7 +13,7 @@ weight = -2 [values] adhesion_type = brim -material_print_temperature = =default_material_print_temperature + 10 +material_print_temperature = =default_material_print_temperature + 5 ooze_shield_angle = 40 raft_airgap = 0.25 skin_overlap = 50 diff --git a/resources/quality/ultimaker3/um3_aa0.4_Nylon_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_Nylon_Fast_Print.inst.cfg index 429d42f0ab..bc890977eb 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_Nylon_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_Nylon_Fast_Print.inst.cfg @@ -13,7 +13,6 @@ weight = -1 [values] adhesion_type = brim -material_print_temperature = =default_material_print_temperature + 5 ooze_shield_angle = 40 raft_airgap = 0.25 skin_overlap = 50 diff --git a/resources/quality/ultimaker3/um3_aa0.4_Nylon_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_Nylon_High_Quality.inst.cfg index b54be179d1..8080dc1825 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_Nylon_High_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_Nylon_High_Quality.inst.cfg @@ -13,6 +13,7 @@ weight = 1 [values] adhesion_type = brim +material_print_temperature = =default_material_print_temperature - 5 ooze_shield_angle = 40 raft_airgap = 0.25 skin_overlap = 50 diff --git a/resources/quality/ultimaker3/um3_aa0.4_Nylon_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_Nylon_Normal_Quality.inst.cfg index 4e78688e6f..f034413001 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_Nylon_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_Nylon_Normal_Quality.inst.cfg @@ -13,6 +13,7 @@ weight = 0 [values] adhesion_type = brim +material_print_temperature = =default_material_print_temperature - 5 ooze_shield_angle = 40 raft_airgap = 0.25 skin_overlap = 50 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg index 73e2798c35..28e8ccbf75 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg @@ -22,7 +22,6 @@ layer_height = 0.2 machine_min_cool_heat_time_window = 15 machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 -material_print_temperature = =default_material_print_temperature + 10 multiple_mesh_overlap = 0 ooze_shield_angle = 40 prime_tower_enable = True diff --git a/resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg index 47c5b8fedc..5113277ab2 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg @@ -21,7 +21,6 @@ layer_height = 0.15 machine_min_cool_heat_time_window = 15 machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 -material_print_temperature = =default_material_print_temperature + 10 multiple_mesh_overlap = 0 ooze_shield_angle = 40 prime_tower_enable = True diff --git a/resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg index 806bdaecde..636ce41e71 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg @@ -22,7 +22,7 @@ layer_height = 0.06 machine_min_cool_heat_time_window = 15 machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 -material_print_temperature = =default_material_print_temperature - 10 +material_print_temperature = =default_material_print_temperature - 20 multiple_mesh_overlap = 0 ooze_shield_angle = 40 prime_tower_enable = True diff --git a/resources/quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg index 859f59664b..a7c533bfea 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg @@ -20,6 +20,7 @@ infill_wipe_dist = 0.1 machine_min_cool_heat_time_window = 15 machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 +material_print_temperature = =default_material_print_temperature - 10 multiple_mesh_overlap = 0 ooze_shield_angle = 40 prime_tower_enable = True diff --git a/resources/quality/ultimaker3/um3_aa0.4_PETG_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PETG_Fast_Print.inst.cfg index 5b26b05953..8bde02fd50 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PETG_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PETG_Fast_Print.inst.cfg @@ -12,7 +12,6 @@ variant = AA 0.4 weight = -1 [values] -material_print_temperature = =default_material_print_temperature retraction_combing = all speed_infill = =math.ceil(speed_print * 50 / 60) speed_print = 60 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PP_Draft_Print.inst.cfg index bc39d11e3f..c82043d3af 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PP_Draft_Print.inst.cfg @@ -22,7 +22,7 @@ machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 10 -material_print_temperature = =default_material_print_temperature - 5 +material_print_temperature = =default_material_print_temperature + 8 multiple_mesh_overlap = 0 prime_tower_enable = False prime_tower_size = 16 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PP_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PP_Fast_Print.inst.cfg index f1fc634a3f..74a628f7cb 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PP_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PP_Fast_Print.inst.cfg @@ -22,7 +22,6 @@ machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 10 -material_print_temperature = =default_material_print_temperature - 13 multiple_mesh_overlap = 0 prime_tower_enable = False prime_tower_size = 16 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PP_Normal_Quality.inst.cfg index 1bd725e85d..fa9b4c54ea 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PP_Normal_Quality.inst.cfg @@ -21,7 +21,7 @@ machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 10 -material_print_temperature = =default_material_print_temperature - 15 +material_print_temperature = =default_material_print_temperature - 2 multiple_mesh_overlap = 0 prime_tower_enable = False prime_tower_size = 16 diff --git a/resources/quality/ultimaker3/um3_aa0.4_TPLA_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_TPLA_Draft_Print.inst.cfg index 477f85f5b6..cffd1e6075 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_TPLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_TPLA_Draft_Print.inst.cfg @@ -14,7 +14,6 @@ weight = -2 [values] machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 -material_print_temperature = =default_material_print_temperature -10 prime_tower_enable = False skin_overlap = 20 speed_print = 50 diff --git a/resources/quality/ultimaker3/um3_aa0.4_TPLA_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_TPLA_Fast_Print.inst.cfg index 13e980cf6a..94fe824f5e 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_TPLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_TPLA_Fast_Print.inst.cfg @@ -14,7 +14,6 @@ weight = -1 [values] machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 -material_print_temperature = =default_material_print_temperature -10 prime_tower_enable = False speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) diff --git a/resources/quality/ultimaker3/um3_aa0.4_TPLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_TPLA_Normal_Quality.inst.cfg index 636034bab1..05a6896646 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_TPLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_TPLA_Normal_Quality.inst.cfg @@ -14,7 +14,7 @@ weight = 0 [values] machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 -material_print_temperature = =default_material_print_temperature - 15 +material_print_temperature = =default_material_print_temperature - 5 prime_tower_enable = False skin_overlap = 10 speed_print = 45 diff --git a/resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg index 74b4c4c485..ca88ca0986 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg @@ -25,7 +25,6 @@ machine_nozzle_heat_up_speed = 2.5 material_final_print_temperature = =material_print_temperature - 10 material_flow = 106 material_initial_print_temperature = =material_print_temperature - 10 -material_print_temperature = =default_material_print_temperature + 2 multiple_mesh_overlap = 0 prime_tower_wipe_enabled = True retraction_count_max = 15 diff --git a/resources/quality/ultimaker3/um3_aa0.4_TPU_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_TPU_Fast_Print.inst.cfg index 8d4bf4bc39..e084600c42 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_TPU_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_TPU_Fast_Print.inst.cfg @@ -25,7 +25,6 @@ machine_nozzle_heat_up_speed = 2.5 material_final_print_temperature = =material_print_temperature - 10 material_flow = 106 material_initial_print_temperature = =material_print_temperature - 10 -material_print_temperature = =default_material_print_temperature + 2 multiple_mesh_overlap = 0 prime_tower_wipe_enabled = True retraction_amount = 7 diff --git a/resources/quality/ultimaker3/um3_aa0.4_TPU_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_TPU_Normal_Quality.inst.cfg index 519b3bdd44..e6ea1f555d 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_TPU_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_TPU_Normal_Quality.inst.cfg @@ -24,6 +24,7 @@ machine_nozzle_heat_up_speed = 2.5 material_final_print_temperature = =material_print_temperature - 10 material_flow = 106 material_initial_print_temperature = =material_print_temperature - 10 +material_print_temperature = =default_material_print_temperature - 2 multiple_mesh_overlap = 0 prime_tower_wipe_enabled = True retraction_count_max = 15 diff --git a/resources/quality/ultimaker3/um3_aa0.8_ABS_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_ABS_Draft_Print.inst.cfg index adb2500a70..d863230b10 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_ABS_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_ABS_Draft_Print.inst.cfg @@ -12,7 +12,7 @@ variant = AA 0.8 weight = -2 [values] -material_print_temperature = =default_material_print_temperature + 25 +material_print_temperature = =default_material_print_temperature + 10 speed_print = 50 speed_topbottom = =math.ceil(speed_print * 30 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) diff --git a/resources/quality/ultimaker3/um3_aa0.8_ABS_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_ABS_Superdraft_Print.inst.cfg index ae7d70cb11..1a95bcb77f 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_ABS_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_ABS_Superdraft_Print.inst.cfg @@ -13,7 +13,7 @@ weight = -4 [values] layer_height = 0.4 -material_print_temperature = =default_material_print_temperature + 30 +material_print_temperature = =default_material_print_temperature + 15 speed_infill = =math.ceil(speed_print * 37 / 50) speed_print = 50 speed_topbottom = =math.ceil(speed_print * 30 / 50) diff --git a/resources/quality/ultimaker3/um3_aa0.8_ABS_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_ABS_Verydraft_Print.inst.cfg index 679fe38c7c..7ff4d13b02 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_ABS_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_ABS_Verydraft_Print.inst.cfg @@ -13,7 +13,7 @@ weight = -3 [values] layer_height = 0.3 -material_print_temperature = =default_material_print_temperature + 27 +material_print_temperature = =default_material_print_temperature + 12 speed_print = 50 speed_topbottom = =math.ceil(speed_print * 30 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) diff --git a/resources/quality/ultimaker3/um3_aa0.8_CPEP_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_CPEP_Fast_Print.inst.cfg index afa3b10a6b..dcca81f3ef 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_CPEP_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_CPEP_Fast_Print.inst.cfg @@ -16,7 +16,7 @@ weight = -2 brim_width = 14 machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 -material_print_temperature = =default_material_print_temperature - 10 +material_print_temperature = =default_material_print_temperature - 20 prime_tower_enable = True retraction_hop = 0.1 retraction_hop_enabled = False diff --git a/resources/quality/ultimaker3/um3_aa0.8_CPEP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_CPEP_Superdraft_Print.inst.cfg index 4134e74d7f..585ae8eefe 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_CPEP_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_CPEP_Superdraft_Print.inst.cfg @@ -17,7 +17,7 @@ brim_width = 14 layer_height = 0.4 machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 -material_print_temperature = =default_material_print_temperature - 5 +material_print_temperature = =default_material_print_temperature - 15 prime_tower_enable = True retraction_hop = 0.1 retraction_hop_enabled = False diff --git a/resources/quality/ultimaker3/um3_aa0.8_CPEP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_CPEP_Verydraft_Print.inst.cfg index 31d12a0fb3..2280a837ae 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_CPEP_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_CPEP_Verydraft_Print.inst.cfg @@ -17,7 +17,7 @@ brim_width = 14 layer_height = 0.3 machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 -material_print_temperature = =default_material_print_temperature - 7 +material_print_temperature = =default_material_print_temperature - 17 prime_tower_enable = True retraction_hop = 0.1 retraction_hop_enabled = False diff --git a/resources/quality/ultimaker3/um3_aa0.8_CPE_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_CPE_Draft_Print.inst.cfg index 47a160b63d..b1f867807b 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_CPE_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_CPE_Draft_Print.inst.cfg @@ -13,7 +13,7 @@ weight = -2 [values] brim_width = 15 -material_print_temperature = =default_material_print_temperature + 15 +material_print_temperature = =default_material_print_temperature + 10 prime_tower_enable = True speed_print = 40 speed_topbottom = =math.ceil(speed_print * 25 / 40) diff --git a/resources/quality/ultimaker3/um3_aa0.8_CPE_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_CPE_Superdraft_Print.inst.cfg index fa6985645a..a75ae74ada 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_CPE_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_CPE_Superdraft_Print.inst.cfg @@ -14,7 +14,7 @@ weight = -4 [values] brim_width = 15 layer_height = 0.4 -material_print_temperature = =default_material_print_temperature + 20 +material_print_temperature = =default_material_print_temperature + 15 prime_tower_enable = True speed_infill = =math.ceil(speed_print * 33 / 45) speed_print = 45 diff --git a/resources/quality/ultimaker3/um3_aa0.8_CPE_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_CPE_Verydraft_Print.inst.cfg index ba0421ad11..c1544a00e2 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_CPE_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_CPE_Verydraft_Print.inst.cfg @@ -14,7 +14,7 @@ weight = -3 [values] brim_width = 15 layer_height = 0.3 -material_print_temperature = =default_material_print_temperature + 17 +material_print_temperature = =default_material_print_temperature + 12 prime_tower_enable = True speed_print = 40 speed_topbottom = =math.ceil(speed_print * 25 / 40) diff --git a/resources/quality/ultimaker3/um3_aa0.8_Nylon_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_Nylon_Draft_Print.inst.cfg index 4f44e7fe59..a0fc036566 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_Nylon_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_Nylon_Draft_Print.inst.cfg @@ -15,6 +15,7 @@ weight = -2 brim_width = 5.6 machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 +material_print_temperature = =default_material_print_temperature - 5 ooze_shield_angle = 40 prime_tower_enable = True raft_airgap = 0.45 diff --git a/resources/quality/ultimaker3/um3_aa0.8_Nylon_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_Nylon_Superdraft_Print.inst.cfg index f13bb3bbc7..547ab013fb 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_Nylon_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_Nylon_Superdraft_Print.inst.cfg @@ -16,6 +16,7 @@ brim_width = 5.6 layer_height = 0.4 machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 +material_print_temperature = =default_material_print_temperature - 5 ooze_shield_angle = 40 prime_tower_enable = True raft_airgap = 0.45 diff --git a/resources/quality/ultimaker3/um3_aa0.8_Nylon_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_Nylon_Verydraft_Print.inst.cfg index c945d31b54..b17789ad0f 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_Nylon_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_Nylon_Verydraft_Print.inst.cfg @@ -16,6 +16,7 @@ brim_width = 5.6 layer_height = 0.3 machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 +material_print_temperature = =default_material_print_temperature - 5 ooze_shield_angle = 40 prime_tower_enable = True raft_airgap = 0.45 diff --git a/resources/quality/ultimaker3/um3_aa0.8_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PC_Fast_Print.inst.cfg index 189621449c..2a3cd5df62 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PC_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PC_Fast_Print.inst.cfg @@ -14,7 +14,7 @@ weight = -2 [values] brim_width = 14 -material_print_temperature = =default_material_print_temperature - 5 +material_print_temperature = =default_material_print_temperature - 15 raft_airgap = 0.5 skin_overlap = 0 speed_print = 50 diff --git a/resources/quality/ultimaker3/um3_aa0.8_PC_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PC_Superdraft_Print.inst.cfg index 513cbf51c2..ddd5a34efa 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PC_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PC_Superdraft_Print.inst.cfg @@ -15,6 +15,7 @@ weight = -4 [values] brim_width = 14 layer_height = 0.4 +material_print_temperature = =default_material_print_temperature - 10 raft_airgap = 0.5 skin_overlap = 0 speed_infill = =math.ceil(speed_print * 37 / 50) diff --git a/resources/quality/ultimaker3/um3_aa0.8_PC_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PC_Verydraft_Print.inst.cfg index c205489670..bf4fc9b6ab 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PC_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PC_Verydraft_Print.inst.cfg @@ -15,7 +15,7 @@ weight = -3 [values] brim_width = 14 layer_height = 0.3 -material_print_temperature = =default_material_print_temperature - 2 +material_print_temperature = =default_material_print_temperature - 12 raft_airgap = 0.5 skin_overlap = 0 speed_print = 50 diff --git a/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg index 031cefbe46..145389fbe4 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg @@ -14,7 +14,7 @@ weight = -2 [values] brim_width = 25 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral' -material_print_temperature = =default_material_print_temperature - 2 +material_print_temperature = =default_material_print_temperature + 11 multiple_mesh_overlap = 0.2 prime_tower_enable = True prime_tower_flow = 100 diff --git a/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg index 551e05f0bd..68d54bd406 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg @@ -14,7 +14,7 @@ weight = -4 [values] brim_width = 25 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral' -material_print_temperature = =default_material_print_temperature + 2 +material_print_temperature = =default_material_print_temperature + 15 multiple_mesh_overlap = 0.2 prime_tower_enable = True prime_tower_flow = 100 diff --git a/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg index 4ad2973eb1..2aa79cad79 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg @@ -15,6 +15,7 @@ weight = -3 brim_width = 25 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral' layer_height = 0.3 +material_print_temperature = =default_material_print_temperature + 13 multiple_mesh_overlap = 0.2 prime_tower_enable = True prime_tower_flow = 100 diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPLA_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPLA_Draft_Print.inst.cfg index 95acfbe1e1..a9b7a92918 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_TPLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_TPLA_Draft_Print.inst.cfg @@ -16,7 +16,7 @@ gradual_infill_step_height = =3 * layer_height infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cubic' machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 -material_print_temperature = =default_material_print_temperature + 0 +material_print_temperature = =default_material_print_temperature + 10 prime_tower_enable = False speed_print = 45 support_angle = 70 diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPLA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPLA_Superdraft_Print.inst.cfg index bb16356c0e..16e17c500e 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_TPLA_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_TPLA_Superdraft_Print.inst.cfg @@ -16,7 +16,7 @@ gradual_infill_step_height = =3 * layer_height infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cubic' machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 -material_print_temperature = =default_material_print_temperature + 5 +material_print_temperature = =default_material_print_temperature + 15 prime_tower_enable = False speed_infill = =math.ceil(speed_print * 30 / 30) speed_print = 30 diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPLA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPLA_Verydraft_Print.inst.cfg index f966c0c56a..96dec4f1c5 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_TPLA_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_TPLA_Verydraft_Print.inst.cfg @@ -16,7 +16,7 @@ gradual_infill_step_height = =3 * layer_height infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cubic' machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 -material_print_temperature = =default_material_print_temperature + 5 +material_print_temperature = =default_material_print_temperature + 15 prime_tower_enable = False speed_infill = =math.ceil(speed_print * 30 / 35) speed_topbottom = =math.ceil(speed_print * 20 / 35) diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg index ac65ddbacd..859eb3b33a 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg @@ -21,7 +21,7 @@ machine_nozzle_heat_up_speed = 2.5 material_final_print_temperature = =material_print_temperature - 10 material_flow = 105 material_initial_print_temperature = =material_print_temperature - 10 -material_print_temperature = =default_material_print_temperature - 2 +material_print_temperature = =default_material_print_temperature - 4 multiple_mesh_overlap = 0.2 prime_tower_enable = True prime_tower_flow = 100 diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg index be99f146bb..61ace7da80 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg @@ -22,7 +22,6 @@ machine_nozzle_heat_up_speed = 2.5 material_final_print_temperature = =material_print_temperature - 10 material_flow = 105 material_initial_print_temperature = =material_print_temperature - 10 -material_print_temperature = =default_material_print_temperature + 2 multiple_mesh_overlap = 0.2 prime_tower_enable = True prime_tower_flow = 100 diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg index 4b21f7e531..e45b8f2d1d 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg @@ -22,6 +22,7 @@ machine_nozzle_heat_up_speed = 2.5 material_final_print_temperature = =material_print_temperature - 10 material_flow = 105 material_initial_print_temperature = =material_print_temperature - 10 +material_print_temperature = =default_material_print_temperature - 2 multiple_mesh_overlap = 0.2 prime_tower_enable = True prime_tower_flow = 100 diff --git a/resources/quality/ultimaker3/um3_bb0.4_PVA_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_bb0.4_PVA_Draft_Print.inst.cfg index 05df038996..eab1a39931 100644 --- a/resources/quality/ultimaker3/um3_bb0.4_PVA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_bb0.4_PVA_Draft_Print.inst.cfg @@ -14,7 +14,7 @@ weight = -2 [values] brim_replaces_support = False cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) -material_print_temperature = =default_material_print_temperature + 10 +material_print_temperature = =default_material_print_temperature + 5 prime_tower_enable = False retraction_count_max = 5 skin_overlap = 20 diff --git a/resources/quality/ultimaker3/um3_bb0.4_PVA_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_bb0.4_PVA_Fast_Print.inst.cfg index 75e0fdae3e..ad1e26c7da 100644 --- a/resources/quality/ultimaker3/um3_bb0.4_PVA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_bb0.4_PVA_Fast_Print.inst.cfg @@ -14,7 +14,6 @@ weight = -1 [values] brim_replaces_support = False cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) -material_print_temperature = =default_material_print_temperature + 5 prime_tower_enable = False retraction_count_max = 5 skin_overlap = 15 diff --git a/resources/quality/ultimaker3/um3_bb0.4_PVA_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_bb0.4_PVA_High_Quality.inst.cfg index f6ffbe9820..e5ae49b17d 100644 --- a/resources/quality/ultimaker3/um3_bb0.4_PVA_High_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_bb0.4_PVA_High_Quality.inst.cfg @@ -14,6 +14,7 @@ weight = 1 [values] brim_replaces_support = False cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) +material_print_temperature = =default_material_print_temperature - 5 prime_tower_enable = False retraction_count_max = 5 skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width)) diff --git a/resources/quality/ultimaker3/um3_bb0.4_PVA_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_bb0.4_PVA_Normal_Quality.inst.cfg index b388407c40..38334b4358 100644 --- a/resources/quality/ultimaker3/um3_bb0.4_PVA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_bb0.4_PVA_Normal_Quality.inst.cfg @@ -14,6 +14,7 @@ weight = 0 [values] brim_replaces_support = False cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) +material_print_temperature = =default_material_print_temperature - 5 prime_tower_enable = False retraction_count_max = 5 skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width)) diff --git a/resources/quality/ultimaker3/um3_bb0.8_PVA_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_bb0.8_PVA_Draft_Print.inst.cfg index ffb4ac0c89..107e29b30f 100644 --- a/resources/quality/ultimaker3/um3_bb0.8_PVA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_bb0.8_PVA_Draft_Print.inst.cfg @@ -14,7 +14,6 @@ weight = -2 [values] brim_replaces_support = False cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) -material_print_temperature = =default_material_print_temperature + 5 retraction_count_max = 5 skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width)) support_interface_enable = True diff --git a/resources/quality/ultimaker3/um3_bb0.8_PVA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_bb0.8_PVA_Superdraft_Print.inst.cfg index 40a7702d92..7c9d28ae29 100644 --- a/resources/quality/ultimaker3/um3_bb0.8_PVA_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_bb0.8_PVA_Superdraft_Print.inst.cfg @@ -14,6 +14,7 @@ weight = -4 [values] brim_replaces_support = False cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) +material_print_temperature = =default_material_print_temperature + 5 retraction_count_max = 5 skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width)) support_interface_enable = True diff --git a/resources/quality/ultimaker3/um3_bb0.8_PVA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_bb0.8_PVA_Verydraft_Print.inst.cfg index 655b1ee8fe..66df697ddf 100644 --- a/resources/quality/ultimaker3/um3_bb0.8_PVA_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_bb0.8_PVA_Verydraft_Print.inst.cfg @@ -14,6 +14,7 @@ weight = -3 [values] brim_replaces_support = False cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) +material_print_temperature = =default_material_print_temperature + 5 retraction_count_max = 5 skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width)) support_interface_enable = True diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_abs_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_abs_0.1mm.inst.cfg index 3a88801570..5e0afa0015 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.25_abs_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_abs_0.1mm.inst.cfg @@ -12,6 +12,7 @@ variant = AA 0.25 weight = 0 [values] +material_print_temperature = =default_material_print_temperature - 20 speed_topbottom = =math.ceil(speed_print * 30 / 55) support_bottom_distance = =support_z_distance support_interface_enable = True diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_cpe_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_cpe_0.1mm.inst.cfg index cd74f2688f..de251c92dd 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.25_cpe_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_cpe_0.1mm.inst.cfg @@ -12,6 +12,7 @@ variant = AA 0.25 weight = 0 [values] +material_print_temperature = =default_material_print_temperature - 15 speed_infill = =math.ceil(speed_print * 40 / 55) speed_topbottom = =math.ceil(speed_print * 30 / 55) support_bottom_distance = =support_z_distance diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_nylon_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_nylon_0.1mm.inst.cfg index a148563d97..c6d99b63b5 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.25_nylon_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_nylon_0.1mm.inst.cfg @@ -14,6 +14,7 @@ weight = 0 [values] machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 +material_print_temperature = =default_material_print_temperature - 20 ooze_shield_angle = 40 raft_airgap = 0.4 retraction_min_travel = 5 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_pc_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_pc_0.1mm.inst.cfg index 7a15e94478..ec86494397 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.25_pc_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_pc_0.1mm.inst.cfg @@ -17,6 +17,7 @@ brim_width = 20 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_wipe_dist = 0.1 machine_min_cool_heat_time_window = 15 +material_print_temperature = =default_material_print_temperature - 10 multiple_mesh_overlap = 0 ooze_shield_angle = 40 prime_tower_enable = True diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_petg_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_petg_0.1mm.inst.cfg index d2695b0eaf..bf1b51dfdc 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.25_petg_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_petg_0.1mm.inst.cfg @@ -12,7 +12,7 @@ variant = AA 0.25 weight = 0 [values] -material_print_temperature = =default_material_print_temperature - 5 +material_print_temperature = =default_material_print_temperature - 15 speed_infill = =math.ceil(speed_print * 40 / 55) speed_topbottom = =math.ceil(speed_print * 30 / 55) support_bottom_distance = =support_z_distance diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_pla_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_pla_0.1mm.inst.cfg index 1b40b93f91..a09a6eb09a 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.25_pla_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_pla_0.1mm.inst.cfg @@ -16,7 +16,7 @@ brim_width = 8 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 -material_print_temperature = 190 +material_print_temperature = =default_material_print_temperature - 10 retraction_hop = 0.2 speed_print = 30 speed_wall = =math.ceil(speed_print * 25 / 30) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_pp_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_pp_0.1mm.inst.cfg index 75cea75e5b..77082932a5 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.25_pp_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_pp_0.1mm.inst.cfg @@ -19,7 +19,7 @@ infill_wipe_dist = 0.1 machine_min_cool_heat_time_window = 15 material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 10 -material_print_temperature = =default_material_print_temperature - 15 +material_print_temperature = =default_material_print_temperature - 2 multiple_mesh_overlap = 0 prime_tower_enable = False prime_tower_size = 16 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_tough-pla_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_tough-pla_0.1mm.inst.cfg index 03daa33819..b751075b85 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.25_tough-pla_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_tough-pla_0.1mm.inst.cfg @@ -16,7 +16,7 @@ brim_width = 8 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 -material_print_temperature = =default_material_print_temperature - 15 +material_print_temperature = =default_material_print_temperature - 5 speed_print = 30 speed_topbottom = =math.ceil(speed_print * 20 / 30) speed_wall = =math.ceil(speed_print * 25 / 30) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.06mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.06mm.inst.cfg index f6969a31a3..6877d9b6a2 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.06mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.06mm.inst.cfg @@ -15,7 +15,7 @@ weight = 1 machine_nozzle_cool_down_speed = 0.8 machine_nozzle_heat_up_speed = 1.5 material_final_print_temperature = =material_print_temperature - 20 -material_print_temperature = =default_material_print_temperature + 5 +material_print_temperature = =default_material_print_temperature - 10 prime_tower_enable = False raft_airgap = 0.15 speed_infill = =math.ceil(speed_print * 40 / 50) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.15mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.15mm.inst.cfg index 6d5e7148c4..de1905e410 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.15mm.inst.cfg @@ -15,7 +15,6 @@ weight = -1 machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 material_final_print_temperature = =material_print_temperature - 20 -material_print_temperature = =default_material_print_temperature + 15 prime_tower_enable = False raft_airgap = 0.15 speed_infill = =math.ceil(speed_print * 45 / 60) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.1mm.inst.cfg index 852c8580d7..ae5c9bcbc1 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.1mm.inst.cfg @@ -15,7 +15,7 @@ weight = 0 machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 material_final_print_temperature = =material_print_temperature - 20 -material_print_temperature = =default_material_print_temperature + 10 +material_print_temperature = =default_material_print_temperature - 5 prime_tower_enable = False raft_airgap = 0.15 speed_infill = =math.ceil(speed_print * 40 / 55) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.2mm.inst.cfg index df95d49c12..701a2db84d 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.2mm.inst.cfg @@ -15,7 +15,7 @@ weight = -2 machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 material_final_print_temperature = =material_print_temperature - 20 -material_print_temperature = =default_material_print_temperature + 20 +material_print_temperature = =default_material_print_temperature + 5 prime_tower_enable = False raft_airgap = 0.15 speed_infill = =math.ceil(speed_print * 50 / 60) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe-plus_0.06mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe-plus_0.06mm.inst.cfg index baa0b0c36d..880461bccf 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe-plus_0.06mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe-plus_0.06mm.inst.cfg @@ -16,7 +16,7 @@ infill_wipe_dist = 0 machine_min_cool_heat_time_window = 15 machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 -material_print_temperature = =default_material_print_temperature + 2 +material_print_temperature = =default_material_print_temperature - 8 multiple_mesh_overlap = 0 prime_tower_enable = True prime_tower_wipe_enabled = True diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe-plus_0.15mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe-plus_0.15mm.inst.cfg index f53c0f5aeb..5dd5e61f82 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe-plus_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe-plus_0.15mm.inst.cfg @@ -14,7 +14,6 @@ weight = -1 [values] infill_wipe_dist = 0 machine_min_cool_heat_time_window = 15 -material_print_temperature = =default_material_print_temperature + 10 multiple_mesh_overlap = 0 prime_tower_enable = True prime_tower_wipe_enabled = True diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe-plus_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe-plus_0.1mm.inst.cfg index 967d3ccd44..7617b35b3b 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe-plus_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe-plus_0.1mm.inst.cfg @@ -16,7 +16,7 @@ infill_wipe_dist = 0 machine_min_cool_heat_time_window = 15 machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 -material_print_temperature = =default_material_print_temperature + 5 +material_print_temperature = =default_material_print_temperature - 5 multiple_mesh_overlap = 0 prime_tower_enable = True prime_tower_wipe_enabled = True diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe-plus_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe-plus_0.2mm.inst.cfg index de0053edf9..7ed1fcd298 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe-plus_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe-plus_0.2mm.inst.cfg @@ -14,7 +14,6 @@ weight = -2 [values] infill_wipe_dist = 0 machine_min_cool_heat_time_window = 15 -material_print_temperature = =default_material_print_temperature + 10 multiple_mesh_overlap = 0 prime_tower_enable = True prime_tower_wipe_enabled = True diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe_0.06mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe_0.06mm.inst.cfg index 7a13861023..97dc8ef3e0 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe_0.06mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe_0.06mm.inst.cfg @@ -15,7 +15,7 @@ weight = 1 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 -material_print_temperature = =default_material_print_temperature - 5 +material_print_temperature = =default_material_print_temperature - 10 retraction_prime_speed = =retraction_speed speed_infill = =math.ceil(speed_print * 40 / 50) speed_print = 50 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe_0.15mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe_0.15mm.inst.cfg index 60a9e47834..51a4f56527 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe_0.15mm.inst.cfg @@ -13,7 +13,6 @@ weight = -1 [values] infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' -material_print_temperature = =default_material_print_temperature + 5 retraction_prime_speed = =retraction_speed speed_infill = =math.ceil(speed_print * 50 / 60) speed_print = 60 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe_0.1mm.inst.cfg index 422258c09c..b53ff26056 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe_0.1mm.inst.cfg @@ -15,6 +15,7 @@ weight = 0 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 +material_print_temperature = =default_material_print_temperature - 5 retraction_prime_speed = =retraction_speed speed_infill = =math.ceil(speed_print * 45 / 55) speed_print = 55 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe_0.2mm.inst.cfg index 1764954dd5..776a06004b 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe_0.2mm.inst.cfg @@ -13,7 +13,7 @@ weight = -2 [values] infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' -material_print_temperature = =default_material_print_temperature + 10 +material_print_temperature = =default_material_print_temperature + 5 retraction_prime_speed = =retraction_speed speed_infill = =math.ceil(speed_print * 50 / 60) speed_print = 60 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_nylon_0.06mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_nylon_0.06mm.inst.cfg index f6be35a2ec..f30d77be95 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_nylon_0.06mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_nylon_0.06mm.inst.cfg @@ -12,6 +12,7 @@ variant = AA 0.4 weight = 1 [values] +material_print_temperature = =default_material_print_temperature - 5 ooze_shield_angle = 40 raft_airgap = 0.4 support_bottom_distance = =support_z_distance diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_nylon_0.15mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_nylon_0.15mm.inst.cfg index 874bcc66f0..a7eefa9867 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_nylon_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_nylon_0.15mm.inst.cfg @@ -12,7 +12,6 @@ variant = AA 0.4 weight = -1 [values] -material_print_temperature = =default_material_print_temperature + 5 ooze_shield_angle = 40 raft_airgap = 0.4 support_bottom_distance = =support_z_distance diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_nylon_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_nylon_0.1mm.inst.cfg index 89c3b6f361..8a2a2810d6 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_nylon_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_nylon_0.1mm.inst.cfg @@ -12,6 +12,7 @@ variant = AA 0.4 weight = 0 [values] +material_print_temperature = =default_material_print_temperature - 5 ooze_shield_angle = 40 raft_airgap = 0.4 support_bottom_distance = =support_z_distance diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_nylon_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_nylon_0.2mm.inst.cfg index 662aa9fb66..d000e3ec20 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_nylon_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_nylon_0.2mm.inst.cfg @@ -12,7 +12,7 @@ variant = AA 0.4 weight = -2 [values] -material_print_temperature = =default_material_print_temperature + 10 +material_print_temperature = =default_material_print_temperature + 5 ooze_shield_angle = 40 raft_airgap = 0.4 support_bottom_distance = =support_z_distance diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.06mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.06mm.inst.cfg index 4e217f5cca..f46f816cfb 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.06mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.06mm.inst.cfg @@ -18,7 +18,7 @@ infill_wipe_dist = 0.1 machine_min_cool_heat_time_window = 15 machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 -material_print_temperature = =default_material_print_temperature - 10 +material_print_temperature = =default_material_print_temperature - 20 multiple_mesh_overlap = 0 ooze_shield_angle = 40 prime_tower_enable = True diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.15mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.15mm.inst.cfg index b5ec910404..2c23449373 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.15mm.inst.cfg @@ -18,7 +18,6 @@ infill_wipe_dist = 0.1 machine_min_cool_heat_time_window = 15 machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 -material_print_temperature = =default_material_print_temperature + 10 multiple_mesh_overlap = 0 ooze_shield_angle = 40 prime_tower_enable = True diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.1mm.inst.cfg index ff2159e522..e0899c8dc2 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.1mm.inst.cfg @@ -18,6 +18,7 @@ infill_wipe_dist = 0.1 machine_min_cool_heat_time_window = 15 machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 +material_print_temperature = =default_material_print_temperature - 10 multiple_mesh_overlap = 0 ooze_shield_angle = 40 prime_tower_enable = True diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.2mm.inst.cfg index a524c5c040..329bd095d5 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.2mm.inst.cfg @@ -18,7 +18,6 @@ infill_wipe_dist = 0.1 machine_min_cool_heat_time_window = 15 machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 -material_print_temperature = =default_material_print_temperature + 10 multiple_mesh_overlap = 0 ooze_shield_angle = 40 prime_tower_enable = True diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_petg_0.15mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_petg_0.15mm.inst.cfg index 3967838a12..6838afede3 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_petg_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_petg_0.15mm.inst.cfg @@ -13,7 +13,6 @@ weight = -1 [values] infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' -material_print_temperature = =default_material_print_temperature speed_infill = =math.ceil(speed_print * 50 / 60) speed_print = 60 speed_topbottom = =math.ceil(speed_print * 30 / 60) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_pp_0.15mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_pp_0.15mm.inst.cfg index 70d53dd331..eee8fc31b6 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_pp_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_pp_0.15mm.inst.cfg @@ -20,7 +20,6 @@ machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 10 -material_print_temperature = =default_material_print_temperature - 13 multiple_mesh_overlap = 0 prime_tower_enable = False prime_tower_size = 16 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_pp_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_pp_0.1mm.inst.cfg index 009039d972..fa87825718 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_pp_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_pp_0.1mm.inst.cfg @@ -20,7 +20,7 @@ machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 10 -material_print_temperature = =default_material_print_temperature - 15 +material_print_temperature = =default_material_print_temperature - 2 multiple_mesh_overlap = 0 prime_tower_enable = False prime_tower_size = 16 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_pp_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_pp_0.2mm.inst.cfg index 9c2870b661..6c90ec685f 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_pp_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_pp_0.2mm.inst.cfg @@ -20,7 +20,7 @@ machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 10 -material_print_temperature = =default_material_print_temperature - 5 +material_print_temperature = =default_material_print_temperature + 8 multiple_mesh_overlap = 0 prime_tower_enable = False prime_tower_size = 16 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_tough-pla_0.06mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_tough-pla_0.06mm.inst.cfg index e091136b32..b5253cb077 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_tough-pla_0.06mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_tough-pla_0.06mm.inst.cfg @@ -14,7 +14,7 @@ weight = 1 [values] machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 -material_print_temperature = =default_material_print_temperature - 15 +material_print_temperature = =default_material_print_temperature - 5 prime_tower_enable = False retraction_prime_speed = =retraction_speed speed_print = 45 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_tough-pla_0.15mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_tough-pla_0.15mm.inst.cfg index 450c82a0c2..69cf85f349 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_tough-pla_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_tough-pla_0.15mm.inst.cfg @@ -14,7 +14,6 @@ weight = -1 [values] machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 -material_print_temperature = =default_material_print_temperature - 10 prime_tower_enable = False retraction_prime_speed = =retraction_speed speed_print = 45 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_tough-pla_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_tough-pla_0.1mm.inst.cfg index fa25ccb171..397992c551 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_tough-pla_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_tough-pla_0.1mm.inst.cfg @@ -14,7 +14,7 @@ weight = 0 [values] machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 -material_print_temperature = =default_material_print_temperature - 15 +material_print_temperature = =default_material_print_temperature - 5 prime_tower_enable = False retraction_prime_speed = =retraction_speed speed_print = 45 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_tough-pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_tough-pla_0.2mm.inst.cfg index fd3574f313..773da6d3ac 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_tough-pla_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_tough-pla_0.2mm.inst.cfg @@ -14,7 +14,6 @@ weight = -2 [values] machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 -material_print_temperature = =default_material_print_temperature - 10 prime_tower_enable = False retraction_prime_speed = =retraction_speed speed_print = 50 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_tough-pla_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_tough-pla_0.3mm.inst.cfg index cbf086000e..10e43b5699 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_tough-pla_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_tough-pla_0.3mm.inst.cfg @@ -21,7 +21,7 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_sparse_density = 15 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 -material_print_temperature = =default_material_print_temperature - 5 +material_print_temperature = =default_material_print_temperature + 5 prime_tower_enable = False raft_airgap = 0.25 retraction_prime_speed = =retraction_speed diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_tpu_0.15mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_tpu_0.15mm.inst.cfg index c6e9fc00d1..15018203e9 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_tpu_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_tpu_0.15mm.inst.cfg @@ -23,7 +23,6 @@ machine_nozzle_heat_up_speed = 2.5 material_final_print_temperature = =material_print_temperature - 10 material_flow = 106 material_initial_print_temperature = =material_print_temperature - 10 -material_print_temperature = =default_material_print_temperature + 2 multiple_mesh_overlap = 0 prime_tower_wipe_enabled = True retraction_count_max = 15 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_tpu_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_tpu_0.1mm.inst.cfg index 043aa880ad..1b9912c1d6 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_tpu_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_tpu_0.1mm.inst.cfg @@ -23,6 +23,7 @@ machine_nozzle_heat_up_speed = 2.5 material_final_print_temperature = =material_print_temperature - 10 material_flow = 106 material_initial_print_temperature = =material_print_temperature - 10 +material_print_temperature = =default_material_print_temperature - 2 multiple_mesh_overlap = 0 prime_tower_wipe_enabled = True retraction_count_max = 15 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_tpu_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_tpu_0.2mm.inst.cfg index 0c8d7eb429..971cee7b3a 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_tpu_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_tpu_0.2mm.inst.cfg @@ -23,7 +23,6 @@ machine_nozzle_heat_up_speed = 2.5 material_final_print_temperature = =material_print_temperature - 10 material_flow = 106 material_initial_print_temperature = =material_print_temperature - 10 -material_print_temperature = =default_material_print_temperature + 2 multiple_mesh_overlap = 0 prime_tower_wipe_enabled = True retraction_count_max = 15 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_abs_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_abs_0.2mm.inst.cfg index 4e20896edc..2be5fb643e 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_abs_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_abs_0.2mm.inst.cfg @@ -12,7 +12,7 @@ variant = AA 0.8 weight = -2 [values] -material_print_temperature = =default_material_print_temperature + 20 +material_print_temperature = =default_material_print_temperature + 5 speed_print = 50 speed_topbottom = =math.ceil(speed_print * 30 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_abs_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_abs_0.3mm.inst.cfg index ca17504121..219d5f1d56 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_abs_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_abs_0.3mm.inst.cfg @@ -12,7 +12,7 @@ variant = AA 0.8 weight = -3 [values] -material_print_temperature = =default_material_print_temperature + 22 +material_print_temperature = =default_material_print_temperature + 7 speed_print = 50 speed_topbottom = =math.ceil(speed_print * 30 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_abs_0.4mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_abs_0.4mm.inst.cfg index 27972c5ae6..7f0ce6b131 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_abs_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_abs_0.4mm.inst.cfg @@ -12,7 +12,7 @@ variant = AA 0.8 weight = -4 [values] -material_print_temperature = =default_material_print_temperature + 25 +material_print_temperature = =default_material_print_temperature + 10 speed_infill = =math.ceil(speed_print * 37 / 50) speed_print = 50 speed_topbottom = =math.ceil(speed_print * 30 / 50) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_cpe-plus_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_cpe-plus_0.2mm.inst.cfg index 0f2a75f458..c2d04c9bad 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_cpe-plus_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_cpe-plus_0.2mm.inst.cfg @@ -16,7 +16,7 @@ weight = -2 brim_width = 14 machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 -material_print_temperature = =default_material_print_temperature - 10 +material_print_temperature = =default_material_print_temperature - 20 prime_tower_enable = True retraction_hop = 0.1 retraction_hop_enabled = False diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_cpe-plus_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_cpe-plus_0.3mm.inst.cfg index da93a9f55e..caf16e5f94 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_cpe-plus_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_cpe-plus_0.3mm.inst.cfg @@ -16,7 +16,7 @@ weight = -3 brim_width = 14 machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 -material_print_temperature = =default_material_print_temperature - 7 +material_print_temperature = =default_material_print_temperature - 17 prime_tower_enable = True retraction_hop = 0.1 retraction_hop_enabled = False diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_cpe-plus_0.4mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_cpe-plus_0.4mm.inst.cfg index 0b6f95d853..1cd46fab48 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_cpe-plus_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_cpe-plus_0.4mm.inst.cfg @@ -16,7 +16,7 @@ weight = -4 brim_width = 14 machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 -material_print_temperature = =default_material_print_temperature - 5 +material_print_temperature = =default_material_print_temperature - 15 prime_tower_enable = True retraction_hop = 0.1 retraction_hop_enabled = False diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_cpe_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_cpe_0.2mm.inst.cfg index 9e334d613e..f9ee324f33 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_cpe_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_cpe_0.2mm.inst.cfg @@ -13,7 +13,7 @@ weight = -2 [values] brim_width = 15 -material_print_temperature = =default_material_print_temperature + 15 +material_print_temperature = =default_material_print_temperature + 10 prime_tower_enable = True speed_print = 40 speed_topbottom = =math.ceil(speed_print * 25 / 40) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_cpe_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_cpe_0.3mm.inst.cfg index 6a286ca3a0..f883fe1998 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_cpe_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_cpe_0.3mm.inst.cfg @@ -13,7 +13,7 @@ weight = -3 [values] brim_width = 15 -material_print_temperature = =default_material_print_temperature + 17 +material_print_temperature = =default_material_print_temperature + 12 prime_tower_enable = True speed_print = 40 speed_topbottom = =math.ceil(speed_print * 25 / 40) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_cpe_0.4mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_cpe_0.4mm.inst.cfg index b8409d768d..a5c059c5e6 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_cpe_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_cpe_0.4mm.inst.cfg @@ -13,7 +13,7 @@ weight = -4 [values] brim_width = 15 -material_print_temperature = =default_material_print_temperature + 20 +material_print_temperature = =default_material_print_temperature + 15 prime_tower_enable = True speed_infill = =math.ceil(speed_print * 33 / 45) speed_print = 45 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_nylon_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_nylon_0.2mm.inst.cfg index 5268db94b5..e7d656dcc4 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_nylon_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_nylon_0.2mm.inst.cfg @@ -15,6 +15,7 @@ weight = -2 brim_width = 5.6 machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 +material_print_temperature = =default_material_print_temperature - 5 ooze_shield_angle = 40 prime_tower_enable = True raft_airgap = 0.45 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_nylon_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_nylon_0.3mm.inst.cfg index 53718d394b..08c1f4933b 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_nylon_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_nylon_0.3mm.inst.cfg @@ -15,6 +15,7 @@ weight = -3 brim_width = 5.6 machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 +material_print_temperature = =default_material_print_temperature - 5 ooze_shield_angle = 40 prime_tower_enable = True raft_airgap = 0.45 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_nylon_0.4mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_nylon_0.4mm.inst.cfg index 274625304b..c4d2894885 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_nylon_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_nylon_0.4mm.inst.cfg @@ -15,6 +15,7 @@ weight = -4 brim_width = 5.6 machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 +material_print_temperature = =default_material_print_temperature - 5 ooze_shield_angle = 40 prime_tower_enable = True raft_airgap = 0.45 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_pc_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_pc_0.2mm.inst.cfg index 0c4b15aee4..9a79c3831c 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_pc_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_pc_0.2mm.inst.cfg @@ -14,7 +14,7 @@ weight = -2 [values] brim_width = 14 -material_print_temperature = =default_material_print_temperature - 5 +material_print_temperature = =default_material_print_temperature - 15 raft_airgap = 0.5 speed_print = 50 speed_topbottom = =math.ceil(speed_print * 25 / 50) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_pc_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_pc_0.3mm.inst.cfg index c2379f198a..77355d22b5 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_pc_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_pc_0.3mm.inst.cfg @@ -14,7 +14,7 @@ weight = -3 [values] brim_width = 14 -material_print_temperature = =default_material_print_temperature - 2 +material_print_temperature = =default_material_print_temperature - 12 raft_airgap = 0.5 speed_print = 50 speed_topbottom = =math.ceil(speed_print * 25 / 50) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_pc_0.4mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_pc_0.4mm.inst.cfg index daef36ff1a..6669edeaf4 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_pc_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_pc_0.4mm.inst.cfg @@ -14,6 +14,7 @@ weight = -4 [values] brim_width = 14 +material_print_temperature = =default_material_print_temperature - 10 raft_airgap = 0.5 speed_infill = =math.ceil(speed_print * 37 / 50) speed_print = 50 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.2mm.inst.cfg index edeb9dedc5..163f32a36d 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.2mm.inst.cfg @@ -16,7 +16,7 @@ brim_width = 25 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral' material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 10 -material_print_temperature = =default_material_print_temperature - 2 +material_print_temperature = =default_material_print_temperature + 11 multiple_mesh_overlap = 0.2 prime_tower_enable = True prime_tower_flow = 100 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.3mm.inst.cfg index 94a166c078..3f75c3366e 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.3mm.inst.cfg @@ -16,6 +16,7 @@ brim_width = 25 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral' material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 10 +material_print_temperature = =default_material_print_temperature + 13 multiple_mesh_overlap = 0.2 prime_tower_enable = True prime_tower_flow = 100 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.4mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.4mm.inst.cfg index c8a8ff2c11..b2c5dab3c4 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.4mm.inst.cfg @@ -16,7 +16,7 @@ brim_width = 25 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral' material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 10 -material_print_temperature = =default_material_print_temperature + 2 +material_print_temperature = =default_material_print_temperature + 15 multiple_mesh_overlap = 0.2 prime_tower_enable = True prime_tower_flow = 100 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_tough-pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_tough-pla_0.2mm.inst.cfg index 6d8416967e..1f706632ce 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_tough-pla_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_tough-pla_0.2mm.inst.cfg @@ -16,7 +16,7 @@ gradual_infill_step_height = =3 * layer_height infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cubic' machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 -material_print_temperature = =default_material_print_temperature + 0 +material_print_temperature = =default_material_print_temperature + 10 prime_tower_enable = False speed_print = 45 speed_topbottom = =round(speed_print * 35 / 45) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_tough-pla_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_tough-pla_0.3mm.inst.cfg index 22dbf354a7..b1437e9160 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_tough-pla_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_tough-pla_0.3mm.inst.cfg @@ -16,7 +16,7 @@ gradual_infill_step_height = =3 * layer_height infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cubic' machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 -material_print_temperature = =default_material_print_temperature + 5 +material_print_temperature = =default_material_print_temperature + 15 prime_tower_enable = False speed_infill = =math.ceil(speed_print * 30 / 35) speed_print = 35 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_tough-pla_0.4mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_tough-pla_0.4mm.inst.cfg index 0eb95a55e8..7c3c4ff6e9 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_tough-pla_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_tough-pla_0.4mm.inst.cfg @@ -16,7 +16,7 @@ gradual_infill_step_height = =3 * layer_height infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cubic' machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 -material_print_temperature = =default_material_print_temperature + 5 +material_print_temperature = =default_material_print_temperature + 15 prime_tower_enable = False speed_infill = =math.ceil(speed_print * 30 / 30) speed_print = 30 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.2mm.inst.cfg index 55166176e3..75949f45aa 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.2mm.inst.cfg @@ -19,7 +19,7 @@ machine_nozzle_heat_up_speed = 2.5 material_final_print_temperature = =material_print_temperature - 10 material_flow = 105 material_initial_print_temperature = =material_print_temperature - 10 -material_print_temperature = =default_material_print_temperature - 2 +material_print_temperature = =default_material_print_temperature - 4 multiple_mesh_overlap = 0.2 prime_tower_enable = True prime_tower_flow = 100 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.3mm.inst.cfg index 6472902a60..034bda5d09 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.3mm.inst.cfg @@ -20,6 +20,7 @@ machine_nozzle_heat_up_speed = 2.5 material_final_print_temperature = =material_print_temperature - 10 material_flow = 105 material_initial_print_temperature = =material_print_temperature - 10 +material_print_temperature = =default_material_print_temperature - 2 multiple_mesh_overlap = 0.2 prime_tower_enable = True prime_tower_flow = 100 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.4mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.4mm.inst.cfg index 0af9741ce9..e7189d5467 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.4mm.inst.cfg @@ -20,7 +20,6 @@ machine_nozzle_heat_up_speed = 2.5 material_final_print_temperature = =material_print_temperature - 10 material_flow = 105 material_initial_print_temperature = =material_print_temperature - 10 -material_print_temperature = =default_material_print_temperature + 2 multiple_mesh_overlap = 0.2 prime_tower_enable = True prime_tower_flow = 100 diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.06mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.06mm.inst.cfg index 6b4b9ce9d8..12b815d5ab 100644 --- a/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.06mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.06mm.inst.cfg @@ -14,6 +14,7 @@ weight = 1 [values] brim_replaces_support = False cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) +material_print_temperature = =default_material_print_temperature - 5 prime_tower_enable = False retraction_count_max = 5 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width)) diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.15mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.15mm.inst.cfg index 7a93e04b84..5390b3ecb7 100644 --- a/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.15mm.inst.cfg @@ -14,7 +14,6 @@ weight = -1 [values] brim_replaces_support = False cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) -material_print_temperature = =default_material_print_temperature + 5 prime_tower_enable = False retraction_count_max = 5 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width)) diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.1mm.inst.cfg index 9355b568be..b15b5958a7 100644 --- a/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.1mm.inst.cfg @@ -14,6 +14,7 @@ weight = 0 [values] brim_replaces_support = False cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) +material_print_temperature = =default_material_print_temperature - 5 prime_tower_enable = False retraction_count_max = 5 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width)) diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.2mm.inst.cfg index 12dae51e46..e273e85eb5 100644 --- a/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.2mm.inst.cfg @@ -14,7 +14,7 @@ weight = -2 [values] brim_replaces_support = False cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) -material_print_temperature = =default_material_print_temperature + 10 +material_print_temperature = =default_material_print_temperature + 5 prime_tower_enable = False retraction_count_max = 5 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width)) diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.3mm.inst.cfg index 080fa60418..e8401bc025 100644 --- a/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.3mm.inst.cfg @@ -15,6 +15,7 @@ weight = -3 [values] brim_replaces_support = False cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) +material_print_temperature = =default_material_print_temperature - 5 retraction_count_max = 5 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width)) support_infill_sparse_thickness = 0.3 diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.8_pva_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.8_pva_0.2mm.inst.cfg index fbbf768011..34873606af 100644 --- a/resources/quality/ultimaker_s3/um_s3_bb0.8_pva_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_bb0.8_pva_0.2mm.inst.cfg @@ -14,7 +14,6 @@ weight = -2 [values] brim_replaces_support = False cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) -material_print_temperature = =default_material_print_temperature + 5 retraction_count_max = 5 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width)) support_interface_enable = True diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.8_pva_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.8_pva_0.3mm.inst.cfg index b90b445f92..c30007a636 100644 --- a/resources/quality/ultimaker_s3/um_s3_bb0.8_pva_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_bb0.8_pva_0.3mm.inst.cfg @@ -14,6 +14,7 @@ weight = -3 [values] brim_replaces_support = False cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) +material_print_temperature = =default_material_print_temperature + 5 retraction_count_max = 5 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width)) support_infill_sparse_thickness = 0.3 diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.8_pva_0.4mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.8_pva_0.4mm.inst.cfg index 9c168fe747..4bb2a411aa 100644 --- a/resources/quality/ultimaker_s3/um_s3_bb0.8_pva_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_bb0.8_pva_0.4mm.inst.cfg @@ -14,6 +14,7 @@ weight = -4 [values] brim_replaces_support = False cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) +material_print_temperature = =default_material_print_temperature + 5 retraction_count_max = 5 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width)) support_interface_enable = True diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_cffcpe_0.15mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_cffcpe_0.15mm.inst.cfg index e01c1dc440..f205541fe9 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.4_cffcpe_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_cffcpe_0.15mm.inst.cfg @@ -12,7 +12,6 @@ variant = CC 0.4 weight = -1 [values] -material_print_temperature = =default_material_print_temperature support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_cffcpe_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_cffcpe_0.2mm.inst.cfg index f0b6f92aaf..5745328e16 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.4_cffcpe_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_cffcpe_0.2mm.inst.cfg @@ -12,7 +12,6 @@ variant = CC 0.4 weight = -2 [values] -material_print_temperature = =default_material_print_temperature support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_cffpa_0.15mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_cffpa_0.15mm.inst.cfg index 1682bface9..dd4f4c1da1 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.4_cffpa_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_cffpa_0.15mm.inst.cfg @@ -12,7 +12,6 @@ variant = CC 0.4 weight = -1 [values] -material_print_temperature = =default_material_print_temperature support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_cffpa_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_cffpa_0.2mm.inst.cfg index 86c138cdf7..b594e05009 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.4_cffpa_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_cffpa_0.2mm.inst.cfg @@ -12,7 +12,6 @@ variant = CC 0.4 weight = -2 [values] -material_print_temperature = =default_material_print_temperature support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_gffcpe_0.15mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_gffcpe_0.15mm.inst.cfg index 325316d485..ff6a9fb197 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.4_gffcpe_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_gffcpe_0.15mm.inst.cfg @@ -12,7 +12,6 @@ variant = CC 0.4 weight = -1 [values] -material_print_temperature = =default_material_print_temperature support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_gffcpe_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_gffcpe_0.2mm.inst.cfg index e0ac86009e..d57c195038 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.4_gffcpe_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_gffcpe_0.2mm.inst.cfg @@ -12,7 +12,6 @@ variant = CC 0.4 weight = -2 [values] -material_print_temperature = =default_material_print_temperature support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_gffpa_0.15mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_gffpa_0.15mm.inst.cfg index 50552e9f6f..3ff36e0f35 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.4_gffpa_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_gffpa_0.15mm.inst.cfg @@ -12,7 +12,6 @@ variant = CC 0.4 weight = -1 [values] -material_print_temperature = =default_material_print_temperature support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_gffpa_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_gffpa_0.2mm.inst.cfg index 56e1c21b9b..879abf7d08 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.4_gffpa_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_gffpa_0.2mm.inst.cfg @@ -12,7 +12,6 @@ variant = CC 0.4 weight = -2 [values] -material_print_temperature = =default_material_print_temperature support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.6_cffcpe_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.6_cffcpe_0.2mm.inst.cfg index cb3c769b55..2021632327 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.6_cffcpe_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.6_cffcpe_0.2mm.inst.cfg @@ -12,7 +12,6 @@ variant = CC 0.6 weight = -2 [values] -material_print_temperature = =default_material_print_temperature support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.6_cffpa_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.6_cffpa_0.2mm.inst.cfg index 1f5e04d2d0..831bf6e90b 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.6_cffpa_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.6_cffpa_0.2mm.inst.cfg @@ -12,7 +12,6 @@ variant = CC 0.6 weight = -2 [values] -material_print_temperature = =default_material_print_temperature support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.6_gffcpe_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.6_gffcpe_0.2mm.inst.cfg index a5c9456135..44850349f2 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.6_gffcpe_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.6_gffcpe_0.2mm.inst.cfg @@ -12,7 +12,6 @@ variant = CC 0.6 weight = -2 [values] -material_print_temperature = =default_material_print_temperature support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.6_gffpa_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.6_gffpa_0.2mm.inst.cfg index 44e8f460aa..b20fe94145 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.6_gffpa_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.6_gffpa_0.2mm.inst.cfg @@ -12,7 +12,6 @@ variant = CC 0.6 weight = -2 [values] -material_print_temperature = =default_material_print_temperature support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_abs_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_abs_0.1mm.inst.cfg index 08053a4f6d..2e09727a19 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.25_abs_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_abs_0.1mm.inst.cfg @@ -12,6 +12,7 @@ variant = AA 0.25 weight = 0 [values] +material_print_temperature = =default_material_print_temperature - 20 speed_topbottom = =math.ceil(speed_print * 30 / 55) support_bottom_distance = =support_z_distance support_interface_enable = True diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_cpe_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_cpe_0.1mm.inst.cfg index ca39f8dc7a..eb98d02593 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.25_cpe_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_cpe_0.1mm.inst.cfg @@ -12,6 +12,7 @@ variant = AA 0.25 weight = 0 [values] +material_print_temperature = =default_material_print_temperature - 15 speed_infill = =math.ceil(speed_print * 40 / 55) speed_topbottom = =math.ceil(speed_print * 30 / 55) support_bottom_distance = =support_z_distance diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_nylon_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_nylon_0.1mm.inst.cfg index 009628fd2e..38267fcf24 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.25_nylon_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_nylon_0.1mm.inst.cfg @@ -14,6 +14,7 @@ weight = 0 [values] machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 +material_print_temperature = =default_material_print_temperature - 20 ooze_shield_angle = 40 raft_airgap = 0.4 retraction_min_travel = 5 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_pc_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_pc_0.1mm.inst.cfg index eeffba5b98..5779142162 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.25_pc_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_pc_0.1mm.inst.cfg @@ -17,6 +17,7 @@ brim_width = 20 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_wipe_dist = 0.1 machine_min_cool_heat_time_window = 15 +material_print_temperature = =default_material_print_temperature - 10 multiple_mesh_overlap = 0 ooze_shield_angle = 40 prime_tower_enable = True diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_petg_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_petg_0.1mm.inst.cfg index 374ef26315..b1fc1b9904 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.25_petg_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_petg_0.1mm.inst.cfg @@ -12,7 +12,7 @@ variant = AA 0.25 weight = 0 [values] -material_print_temperature = =default_material_print_temperature - 5 +material_print_temperature = =default_material_print_temperature - 15 speed_infill = =math.ceil(speed_print * 40 / 55) speed_topbottom = =math.ceil(speed_print * 30 / 55) support_bottom_distance = =support_z_distance diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_pla_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_pla_0.1mm.inst.cfg index 2b99c9acce..ab26722d87 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.25_pla_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_pla_0.1mm.inst.cfg @@ -16,7 +16,7 @@ brim_width = 8 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 -material_print_temperature = 190 +material_print_temperature = =default_material_print_temperature - 10 retraction_hop = 0.2 speed_print = 30 speed_wall = =math.ceil(speed_print * 25 / 30) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_pp_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_pp_0.1mm.inst.cfg index d38c036bcd..64b1be79aa 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.25_pp_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_pp_0.1mm.inst.cfg @@ -19,7 +19,7 @@ infill_wipe_dist = 0.1 machine_min_cool_heat_time_window = 15 material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 10 -material_print_temperature = =default_material_print_temperature - 15 +material_print_temperature = =default_material_print_temperature - 2 multiple_mesh_overlap = 0 prime_tower_enable = False prime_tower_size = 16 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_tough-pla_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_tough-pla_0.1mm.inst.cfg index 4f02a053b4..97a8217333 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.25_tough-pla_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_tough-pla_0.1mm.inst.cfg @@ -16,7 +16,7 @@ brim_width = 8 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 -material_print_temperature = =default_material_print_temperature - 15 +material_print_temperature = =default_material_print_temperature - 5 speed_print = 30 speed_topbottom = =math.ceil(speed_print * 20 / 30) speed_wall = =math.ceil(speed_print * 25 / 30) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_abs_0.06mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_abs_0.06mm.inst.cfg index 7694e37ba3..573b758705 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_abs_0.06mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_abs_0.06mm.inst.cfg @@ -15,7 +15,7 @@ weight = 1 machine_nozzle_cool_down_speed = 0.8 machine_nozzle_heat_up_speed = 1.5 material_final_print_temperature = =material_print_temperature - 20 -material_print_temperature = =default_material_print_temperature + 5 +material_print_temperature = =default_material_print_temperature - 10 prime_tower_enable = False raft_airgap = 0.15 speed_infill = =math.ceil(speed_print * 40 / 50) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_abs_0.15mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_abs_0.15mm.inst.cfg index c27a4a1b57..926ef49922 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_abs_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_abs_0.15mm.inst.cfg @@ -15,7 +15,6 @@ weight = -1 machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 material_final_print_temperature = =material_print_temperature - 20 -material_print_temperature = =default_material_print_temperature + 15 prime_tower_enable = False raft_airgap = 0.15 speed_infill = =math.ceil(speed_print * 45 / 60) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_abs_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_abs_0.1mm.inst.cfg index f19345a0fe..598e83d922 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_abs_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_abs_0.1mm.inst.cfg @@ -15,7 +15,7 @@ weight = 0 machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 material_final_print_temperature = =material_print_temperature - 20 -material_print_temperature = =default_material_print_temperature + 10 +material_print_temperature = =default_material_print_temperature - 5 prime_tower_enable = False raft_airgap = 0.15 speed_infill = =math.ceil(speed_print * 40 / 55) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_abs_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_abs_0.2mm.inst.cfg index 03f67f9924..5f5e9e2fd3 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_abs_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_abs_0.2mm.inst.cfg @@ -15,7 +15,7 @@ weight = -2 machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 material_final_print_temperature = =material_print_temperature - 20 -material_print_temperature = =default_material_print_temperature + 20 +material_print_temperature = =default_material_print_temperature + 5 prime_tower_enable = False raft_airgap = 0.15 speed_infill = =math.ceil(speed_print * 50 / 60) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe-plus_0.06mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe-plus_0.06mm.inst.cfg index 72e6ead239..a77d1b4233 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe-plus_0.06mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe-plus_0.06mm.inst.cfg @@ -16,7 +16,7 @@ infill_wipe_dist = 0 machine_min_cool_heat_time_window = 15 machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 -material_print_temperature = =default_material_print_temperature + 2 +material_print_temperature = =default_material_print_temperature - 8 multiple_mesh_overlap = 0 prime_tower_enable = True prime_tower_wipe_enabled = True diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe-plus_0.15mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe-plus_0.15mm.inst.cfg index 1a4e89f783..805fb08ead 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe-plus_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe-plus_0.15mm.inst.cfg @@ -14,7 +14,6 @@ weight = -1 [values] infill_wipe_dist = 0 machine_min_cool_heat_time_window = 15 -material_print_temperature = =default_material_print_temperature + 10 multiple_mesh_overlap = 0 prime_tower_enable = True prime_tower_wipe_enabled = True diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe-plus_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe-plus_0.1mm.inst.cfg index 6c2e7b2f94..77f775d672 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe-plus_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe-plus_0.1mm.inst.cfg @@ -16,7 +16,7 @@ infill_wipe_dist = 0 machine_min_cool_heat_time_window = 15 machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 -material_print_temperature = =default_material_print_temperature + 5 +material_print_temperature = =default_material_print_temperature - 5 multiple_mesh_overlap = 0 prime_tower_enable = True prime_tower_wipe_enabled = True diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe-plus_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe-plus_0.2mm.inst.cfg index b2182320fd..877c48c42d 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe-plus_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe-plus_0.2mm.inst.cfg @@ -14,7 +14,6 @@ weight = -2 [values] infill_wipe_dist = 0 machine_min_cool_heat_time_window = 15 -material_print_temperature = =default_material_print_temperature + 10 multiple_mesh_overlap = 0 prime_tower_enable = True prime_tower_wipe_enabled = True diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe_0.06mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe_0.06mm.inst.cfg index ab7fc5ef9b..ec98c131a9 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe_0.06mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe_0.06mm.inst.cfg @@ -15,7 +15,7 @@ weight = 1 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 -material_print_temperature = =default_material_print_temperature - 5 +material_print_temperature = =default_material_print_temperature - 10 retraction_prime_speed = =retraction_speed speed_infill = =math.ceil(speed_print * 40 / 50) speed_print = 50 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe_0.15mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe_0.15mm.inst.cfg index 7c27d79d2d..95c436a449 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe_0.15mm.inst.cfg @@ -13,7 +13,6 @@ weight = -1 [values] infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' -material_print_temperature = =default_material_print_temperature + 5 retraction_prime_speed = =retraction_speed speed_infill = =math.ceil(speed_print * 50 / 60) speed_print = 60 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe_0.1mm.inst.cfg index 20c036907a..8f9877eebc 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe_0.1mm.inst.cfg @@ -15,6 +15,7 @@ weight = 0 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 +material_print_temperature = =default_material_print_temperature - 5 retraction_prime_speed = =retraction_speed speed_infill = =math.ceil(speed_print * 45 / 55) speed_print = 55 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe_0.2mm.inst.cfg index b1094daf5a..f5ecef3fc5 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe_0.2mm.inst.cfg @@ -13,7 +13,7 @@ weight = -2 [values] infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' -material_print_temperature = =default_material_print_temperature + 10 +material_print_temperature = =default_material_print_temperature + 5 retraction_prime_speed = =retraction_speed speed_infill = =math.ceil(speed_print * 50 / 60) speed_print = 60 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_nylon_0.06mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_nylon_0.06mm.inst.cfg index 0abeb14221..b9b89ef3b7 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_nylon_0.06mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_nylon_0.06mm.inst.cfg @@ -12,6 +12,7 @@ variant = AA 0.4 weight = 1 [values] +material_print_temperature = =default_material_print_temperature - 5 ooze_shield_angle = 40 raft_airgap = 0.4 support_bottom_distance = =support_z_distance diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_nylon_0.15mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_nylon_0.15mm.inst.cfg index 94536f1904..33c05d16ce 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_nylon_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_nylon_0.15mm.inst.cfg @@ -12,7 +12,6 @@ variant = AA 0.4 weight = -1 [values] -material_print_temperature = =default_material_print_temperature + 5 ooze_shield_angle = 40 raft_airgap = 0.4 support_bottom_distance = =support_z_distance diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_nylon_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_nylon_0.1mm.inst.cfg index f07d801dc0..0248ef6169 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_nylon_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_nylon_0.1mm.inst.cfg @@ -12,6 +12,7 @@ variant = AA 0.4 weight = 0 [values] +material_print_temperature = =default_material_print_temperature - 5 ooze_shield_angle = 40 raft_airgap = 0.4 support_bottom_distance = =support_z_distance diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_nylon_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_nylon_0.2mm.inst.cfg index 005ccf6e59..7440015ced 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_nylon_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_nylon_0.2mm.inst.cfg @@ -12,7 +12,7 @@ variant = AA 0.4 weight = -2 [values] -material_print_temperature = =default_material_print_temperature + 10 +material_print_temperature = =default_material_print_temperature + 5 ooze_shield_angle = 40 raft_airgap = 0.4 support_bottom_distance = =support_z_distance diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.06mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.06mm.inst.cfg index a2e3bd792b..0b471a8c75 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.06mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.06mm.inst.cfg @@ -18,7 +18,7 @@ infill_wipe_dist = 0.1 machine_min_cool_heat_time_window = 15 machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 -material_print_temperature = =default_material_print_temperature - 10 +material_print_temperature = =default_material_print_temperature - 20 multiple_mesh_overlap = 0 ooze_shield_angle = 40 prime_tower_enable = True diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.15mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.15mm.inst.cfg index 9ef073b635..6c9710e436 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.15mm.inst.cfg @@ -18,7 +18,6 @@ infill_wipe_dist = 0.1 machine_min_cool_heat_time_window = 15 machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 -material_print_temperature = =default_material_print_temperature + 10 multiple_mesh_overlap = 0 ooze_shield_angle = 40 prime_tower_enable = True diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.1mm.inst.cfg index e118f0db8a..945b77e699 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.1mm.inst.cfg @@ -18,6 +18,7 @@ infill_wipe_dist = 0.1 machine_min_cool_heat_time_window = 15 machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 +material_print_temperature = =default_material_print_temperature - 10 multiple_mesh_overlap = 0 ooze_shield_angle = 40 prime_tower_enable = True diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.2mm.inst.cfg index 4351a289b9..b523e3c646 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.2mm.inst.cfg @@ -18,7 +18,6 @@ infill_wipe_dist = 0.1 machine_min_cool_heat_time_window = 15 machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 -material_print_temperature = =default_material_print_temperature + 10 multiple_mesh_overlap = 0 ooze_shield_angle = 40 prime_tower_enable = True diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_petg_0.15mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_petg_0.15mm.inst.cfg index 060e9b3540..8a47953164 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_petg_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_petg_0.15mm.inst.cfg @@ -13,7 +13,6 @@ weight = -1 [values] infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' -material_print_temperature = =default_material_print_temperature speed_infill = =math.ceil(speed_print * 50 / 60) speed_print = 60 speed_topbottom = =math.ceil(speed_print * 30 / 60) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_pp_0.15mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_pp_0.15mm.inst.cfg index 9712132da9..85e892628d 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_pp_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_pp_0.15mm.inst.cfg @@ -20,7 +20,6 @@ machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 10 -material_print_temperature = =default_material_print_temperature - 13 multiple_mesh_overlap = 0 prime_tower_enable = False prime_tower_size = 16 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_pp_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_pp_0.1mm.inst.cfg index 79a0f11262..531f946ba8 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_pp_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_pp_0.1mm.inst.cfg @@ -20,7 +20,7 @@ machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 10 -material_print_temperature = =default_material_print_temperature - 15 +material_print_temperature = =default_material_print_temperature - 2 multiple_mesh_overlap = 0 prime_tower_enable = False prime_tower_size = 16 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_pp_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_pp_0.2mm.inst.cfg index 70207475dc..a7f63a76b1 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_pp_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_pp_0.2mm.inst.cfg @@ -20,7 +20,7 @@ machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 10 -material_print_temperature = =default_material_print_temperature - 5 +material_print_temperature = =default_material_print_temperature + 8 multiple_mesh_overlap = 0 prime_tower_enable = False prime_tower_size = 16 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_tough-pla_0.06mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_tough-pla_0.06mm.inst.cfg index f3e17318b6..cf7a8335b8 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_tough-pla_0.06mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_tough-pla_0.06mm.inst.cfg @@ -14,7 +14,7 @@ weight = 1 [values] machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 -material_print_temperature = =default_material_print_temperature - 15 +material_print_temperature = =default_material_print_temperature - 5 prime_tower_enable = False retraction_prime_speed = =retraction_speed speed_print = 45 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_tough-pla_0.15mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_tough-pla_0.15mm.inst.cfg index 6a3ec605ad..a7dcb61128 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_tough-pla_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_tough-pla_0.15mm.inst.cfg @@ -14,7 +14,6 @@ weight = -1 [values] machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 -material_print_temperature = =default_material_print_temperature - 10 prime_tower_enable = False retraction_prime_speed = =retraction_speed speed_print = 45 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_tough-pla_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_tough-pla_0.1mm.inst.cfg index 9e3a3586f3..f053b33478 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_tough-pla_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_tough-pla_0.1mm.inst.cfg @@ -14,7 +14,7 @@ weight = 0 [values] machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 -material_print_temperature = =default_material_print_temperature - 15 +material_print_temperature = =default_material_print_temperature - 5 prime_tower_enable = False retraction_prime_speed = =retraction_speed speed_print = 45 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_tough-pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_tough-pla_0.2mm.inst.cfg index 506ed71f9a..4e98b6005a 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_tough-pla_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_tough-pla_0.2mm.inst.cfg @@ -14,7 +14,6 @@ weight = -2 [values] machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 -material_print_temperature = =default_material_print_temperature - 10 prime_tower_enable = False retraction_prime_speed = =retraction_speed speed_print = 50 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_tough-pla_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_tough-pla_0.3mm.inst.cfg index 5590368369..5c6ed28548 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_tough-pla_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_tough-pla_0.3mm.inst.cfg @@ -21,7 +21,7 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_sparse_density = 15 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 -material_print_temperature = =default_material_print_temperature - 5 +material_print_temperature = =default_material_print_temperature + 5 prime_tower_enable = False raft_airgap = 0.25 retraction_prime_speed = =retraction_speed diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_tpu_0.15mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_tpu_0.15mm.inst.cfg index 281d99afb1..0b69ae0c43 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_tpu_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_tpu_0.15mm.inst.cfg @@ -23,7 +23,6 @@ machine_nozzle_heat_up_speed = 2.5 material_final_print_temperature = =material_print_temperature - 10 material_flow = 106 material_initial_print_temperature = =material_print_temperature - 10 -material_print_temperature = =default_material_print_temperature + 2 multiple_mesh_overlap = 0 prime_tower_wipe_enabled = True retraction_count_max = 15 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_tpu_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_tpu_0.1mm.inst.cfg index 450b9adeb4..29aa42a436 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_tpu_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_tpu_0.1mm.inst.cfg @@ -23,6 +23,7 @@ machine_nozzle_heat_up_speed = 2.5 material_final_print_temperature = =material_print_temperature - 10 material_flow = 106 material_initial_print_temperature = =material_print_temperature - 10 +material_print_temperature = =default_material_print_temperature - 2 multiple_mesh_overlap = 0 prime_tower_wipe_enabled = True retraction_count_max = 15 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_tpu_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_tpu_0.2mm.inst.cfg index 21fbcff466..48e6ffb81b 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_tpu_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_tpu_0.2mm.inst.cfg @@ -23,7 +23,6 @@ machine_nozzle_heat_up_speed = 2.5 material_final_print_temperature = =material_print_temperature - 10 material_flow = 106 material_initial_print_temperature = =material_print_temperature - 10 -material_print_temperature = =default_material_print_temperature + 2 multiple_mesh_overlap = 0 prime_tower_wipe_enabled = True retraction_count_max = 15 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_abs_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_abs_0.2mm.inst.cfg index bb9a4c37b3..0448dbc35c 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_abs_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_abs_0.2mm.inst.cfg @@ -12,7 +12,7 @@ variant = AA 0.8 weight = -2 [values] -material_print_temperature = =default_material_print_temperature + 20 +material_print_temperature = =default_material_print_temperature + 5 speed_print = 50 speed_topbottom = =math.ceil(speed_print * 30 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_abs_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_abs_0.3mm.inst.cfg index 2de9183f1e..5100bd460b 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_abs_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_abs_0.3mm.inst.cfg @@ -12,7 +12,7 @@ variant = AA 0.8 weight = -3 [values] -material_print_temperature = =default_material_print_temperature + 22 +material_print_temperature = =default_material_print_temperature + 7 speed_print = 50 speed_topbottom = =math.ceil(speed_print * 30 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_abs_0.4mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_abs_0.4mm.inst.cfg index 9be6cb8415..6c677be864 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_abs_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_abs_0.4mm.inst.cfg @@ -12,7 +12,7 @@ variant = AA 0.8 weight = -4 [values] -material_print_temperature = =default_material_print_temperature + 25 +material_print_temperature = =default_material_print_temperature + 10 speed_infill = =math.ceil(speed_print * 37 / 50) speed_print = 50 speed_topbottom = =math.ceil(speed_print * 30 / 50) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_cpe-plus_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_cpe-plus_0.2mm.inst.cfg index abdf9b4fb0..0dd369e4dd 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_cpe-plus_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_cpe-plus_0.2mm.inst.cfg @@ -16,7 +16,7 @@ weight = -2 brim_width = 14 machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 -material_print_temperature = =default_material_print_temperature - 10 +material_print_temperature = =default_material_print_temperature - 20 prime_tower_enable = True retraction_hop = 0.1 retraction_hop_enabled = False diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_cpe-plus_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_cpe-plus_0.3mm.inst.cfg index f594dc8d1a..e6ce183f4a 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_cpe-plus_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_cpe-plus_0.3mm.inst.cfg @@ -16,7 +16,7 @@ weight = -3 brim_width = 14 machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 -material_print_temperature = =default_material_print_temperature - 7 +material_print_temperature = =default_material_print_temperature - 17 prime_tower_enable = True retraction_hop = 0.1 retraction_hop_enabled = False diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_cpe-plus_0.4mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_cpe-plus_0.4mm.inst.cfg index a6eb5748b8..0c3abc6e3f 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_cpe-plus_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_cpe-plus_0.4mm.inst.cfg @@ -16,7 +16,7 @@ weight = -4 brim_width = 14 machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 -material_print_temperature = =default_material_print_temperature - 5 +material_print_temperature = =default_material_print_temperature - 15 prime_tower_enable = True retraction_hop = 0.1 retraction_hop_enabled = False diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_cpe_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_cpe_0.2mm.inst.cfg index 4da468aa97..eb6e07e080 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_cpe_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_cpe_0.2mm.inst.cfg @@ -13,7 +13,7 @@ weight = -2 [values] brim_width = 15 -material_print_temperature = =default_material_print_temperature + 15 +material_print_temperature = =default_material_print_temperature + 10 prime_tower_enable = True speed_print = 40 speed_topbottom = =math.ceil(speed_print * 25 / 40) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_cpe_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_cpe_0.3mm.inst.cfg index bcb76b93f0..e7958d9841 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_cpe_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_cpe_0.3mm.inst.cfg @@ -13,7 +13,7 @@ weight = -3 [values] brim_width = 15 -material_print_temperature = =default_material_print_temperature + 17 +material_print_temperature = =default_material_print_temperature + 12 prime_tower_enable = True speed_print = 40 speed_topbottom = =math.ceil(speed_print * 25 / 40) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_cpe_0.4mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_cpe_0.4mm.inst.cfg index 3d561ab611..0683b2959b 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_cpe_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_cpe_0.4mm.inst.cfg @@ -13,7 +13,7 @@ weight = -4 [values] brim_width = 15 -material_print_temperature = =default_material_print_temperature + 20 +material_print_temperature = =default_material_print_temperature + 15 prime_tower_enable = True speed_infill = =math.ceil(speed_print * 33 / 45) speed_print = 45 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_nylon_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_nylon_0.2mm.inst.cfg index 296d429e14..5a774e0750 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_nylon_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_nylon_0.2mm.inst.cfg @@ -15,6 +15,7 @@ weight = -2 brim_width = 5.6 machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 +material_print_temperature = =default_material_print_temperature - 5 ooze_shield_angle = 40 prime_tower_enable = True raft_airgap = 0.45 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_nylon_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_nylon_0.3mm.inst.cfg index 516edc5ac3..bed4ac46d7 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_nylon_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_nylon_0.3mm.inst.cfg @@ -15,6 +15,7 @@ weight = -3 brim_width = 5.6 machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 +material_print_temperature = =default_material_print_temperature - 5 ooze_shield_angle = 40 prime_tower_enable = True raft_airgap = 0.45 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_nylon_0.4mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_nylon_0.4mm.inst.cfg index 83c54957dc..a0d58757da 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_nylon_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_nylon_0.4mm.inst.cfg @@ -15,6 +15,7 @@ weight = -4 brim_width = 5.6 machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 +material_print_temperature = =default_material_print_temperature - 5 ooze_shield_angle = 40 prime_tower_enable = True raft_airgap = 0.45 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_pc_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_pc_0.2mm.inst.cfg index e20850c5b4..ddce4d41ab 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_pc_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_pc_0.2mm.inst.cfg @@ -14,7 +14,7 @@ weight = -2 [values] brim_width = 14 -material_print_temperature = =default_material_print_temperature - 5 +material_print_temperature = =default_material_print_temperature - 15 raft_airgap = 0.5 speed_print = 50 speed_topbottom = =math.ceil(speed_print * 25 / 50) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_pc_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_pc_0.3mm.inst.cfg index 26965dee30..dd51965c6e 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_pc_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_pc_0.3mm.inst.cfg @@ -14,7 +14,7 @@ weight = -3 [values] brim_width = 14 -material_print_temperature = =default_material_print_temperature - 2 +material_print_temperature = =default_material_print_temperature - 12 raft_airgap = 0.5 speed_print = 50 speed_topbottom = =math.ceil(speed_print * 25 / 50) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_pc_0.4mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_pc_0.4mm.inst.cfg index 38cade0bd5..da4671d5af 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_pc_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_pc_0.4mm.inst.cfg @@ -14,6 +14,7 @@ weight = -4 [values] brim_width = 14 +material_print_temperature = =default_material_print_temperature - 10 raft_airgap = 0.5 speed_infill = =math.ceil(speed_print * 37 / 50) speed_print = 50 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.2mm.inst.cfg index 12534702c8..149104700e 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.2mm.inst.cfg @@ -16,7 +16,7 @@ brim_width = 25 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral' material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 10 -material_print_temperature = =default_material_print_temperature - 2 +material_print_temperature = =default_material_print_temperature + 11 multiple_mesh_overlap = 0.2 prime_tower_enable = True prime_tower_flow = 100 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.3mm.inst.cfg index 9e8a34c7bf..670ec78d51 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.3mm.inst.cfg @@ -16,6 +16,7 @@ brim_width = 25 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral' material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 10 +material_print_temperature = =default_material_print_temperature + 13 multiple_mesh_overlap = 0.2 prime_tower_enable = True prime_tower_flow = 100 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.4mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.4mm.inst.cfg index 604614dd77..c9b5c26d64 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.4mm.inst.cfg @@ -16,7 +16,7 @@ brim_width = 25 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral' material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 10 -material_print_temperature = =default_material_print_temperature + 2 +material_print_temperature = =default_material_print_temperature + 15 multiple_mesh_overlap = 0.2 prime_tower_enable = True prime_tower_flow = 100 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_tough-pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_tough-pla_0.2mm.inst.cfg index 3bc7ff58af..26c20268ea 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_tough-pla_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_tough-pla_0.2mm.inst.cfg @@ -16,7 +16,7 @@ gradual_infill_step_height = =3 * layer_height infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cubic' machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 -material_print_temperature = =default_material_print_temperature + 0 +material_print_temperature = =default_material_print_temperature + 10 prime_tower_enable = False speed_print = 45 speed_topbottom = =round(speed_print * 35 / 45) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_tough-pla_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_tough-pla_0.3mm.inst.cfg index 516b4e7d60..cc28dc5150 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_tough-pla_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_tough-pla_0.3mm.inst.cfg @@ -16,7 +16,7 @@ gradual_infill_step_height = =3 * layer_height infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cubic' machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 -material_print_temperature = =default_material_print_temperature + 5 +material_print_temperature = =default_material_print_temperature + 15 prime_tower_enable = False speed_infill = =math.ceil(speed_print * 30 / 35) speed_print = 35 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_tough-pla_0.4mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_tough-pla_0.4mm.inst.cfg index 3227e6c525..eb338d1e1d 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_tough-pla_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_tough-pla_0.4mm.inst.cfg @@ -16,7 +16,7 @@ gradual_infill_step_height = =3 * layer_height infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cubic' machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 -material_print_temperature = =default_material_print_temperature + 5 +material_print_temperature = =default_material_print_temperature + 15 prime_tower_enable = False speed_infill = =math.ceil(speed_print * 30 / 30) speed_print = 30 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.2mm.inst.cfg index 208a8e9412..43436cd4c7 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.2mm.inst.cfg @@ -19,7 +19,7 @@ machine_nozzle_heat_up_speed = 2.5 material_final_print_temperature = =material_print_temperature - 10 material_flow = 105 material_initial_print_temperature = =material_print_temperature - 10 -material_print_temperature = =default_material_print_temperature - 2 +material_print_temperature = =default_material_print_temperature - 4 multiple_mesh_overlap = 0.2 prime_tower_enable = True prime_tower_flow = 100 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.3mm.inst.cfg index 20f44ff936..58b524dd2a 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.3mm.inst.cfg @@ -20,6 +20,7 @@ machine_nozzle_heat_up_speed = 2.5 material_final_print_temperature = =material_print_temperature - 10 material_flow = 105 material_initial_print_temperature = =material_print_temperature - 10 +material_print_temperature = =default_material_print_temperature - 2 multiple_mesh_overlap = 0.2 prime_tower_enable = True prime_tower_flow = 100 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.4mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.4mm.inst.cfg index 814c3f77f8..d17ec5486a 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.4mm.inst.cfg @@ -20,7 +20,6 @@ machine_nozzle_heat_up_speed = 2.5 material_final_print_temperature = =material_print_temperature - 10 material_flow = 105 material_initial_print_temperature = =material_print_temperature - 10 -material_print_temperature = =default_material_print_temperature + 2 multiple_mesh_overlap = 0.2 prime_tower_enable = True prime_tower_flow = 100 diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.06mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.06mm.inst.cfg index 2223084010..2bc28f4c1a 100644 --- a/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.06mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.06mm.inst.cfg @@ -14,6 +14,7 @@ weight = 1 [values] brim_replaces_support = False cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) +material_print_temperature = =default_material_print_temperature - 5 prime_tower_enable = False retraction_count_max = 5 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width)) diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.15mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.15mm.inst.cfg index 7097e1845a..f5b8c35298 100644 --- a/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.15mm.inst.cfg @@ -14,7 +14,6 @@ weight = -1 [values] brim_replaces_support = False cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) -material_print_temperature = =default_material_print_temperature + 5 prime_tower_enable = False retraction_count_max = 5 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width)) diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.1mm.inst.cfg index 9b9145bb39..6457f97c9c 100644 --- a/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.1mm.inst.cfg @@ -14,6 +14,7 @@ weight = 0 [values] brim_replaces_support = False cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) +material_print_temperature = =default_material_print_temperature - 5 prime_tower_enable = False retraction_count_max = 5 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width)) diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.2mm.inst.cfg index 16469a1fdf..eef90f5f17 100644 --- a/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.2mm.inst.cfg @@ -14,7 +14,7 @@ weight = -2 [values] brim_replaces_support = False cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) -material_print_temperature = =default_material_print_temperature + 10 +material_print_temperature = =default_material_print_temperature + 5 prime_tower_enable = False retraction_count_max = 5 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width)) diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.3mm.inst.cfg index feb895ec2e..e1862ce3c4 100644 --- a/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.3mm.inst.cfg @@ -15,6 +15,7 @@ weight = -3 [values] brim_replaces_support = False cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) +material_print_temperature = =default_material_print_temperature - 5 prime_tower_enable = False retraction_count_max = 5 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width)) diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.8_pva_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.8_pva_0.2mm.inst.cfg index 3672423331..bf3a442070 100644 --- a/resources/quality/ultimaker_s5/um_s5_bb0.8_pva_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_bb0.8_pva_0.2mm.inst.cfg @@ -14,7 +14,6 @@ weight = -2 [values] brim_replaces_support = False cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) -material_print_temperature = =default_material_print_temperature + 5 retraction_count_max = 5 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width)) support_interface_enable = True diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.8_pva_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.8_pva_0.3mm.inst.cfg index 696551609d..ff02ecedd5 100644 --- a/resources/quality/ultimaker_s5/um_s5_bb0.8_pva_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_bb0.8_pva_0.3mm.inst.cfg @@ -14,6 +14,7 @@ weight = -3 [values] brim_replaces_support = False cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) +material_print_temperature = =default_material_print_temperature + 5 retraction_count_max = 5 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width)) support_infill_sparse_thickness = 0.3 diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.8_pva_0.4mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.8_pva_0.4mm.inst.cfg index 8052a38dab..7db02b4cdc 100644 --- a/resources/quality/ultimaker_s5/um_s5_bb0.8_pva_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_bb0.8_pva_0.4mm.inst.cfg @@ -14,6 +14,7 @@ weight = -4 [values] brim_replaces_support = False cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) +material_print_temperature = =default_material_print_temperature + 5 retraction_count_max = 5 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width)) support_interface_enable = True diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_cffcpe_0.15mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_cffcpe_0.15mm.inst.cfg index ad3cf1ef5b..18061adda3 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.4_cffcpe_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_cffcpe_0.15mm.inst.cfg @@ -12,7 +12,6 @@ variant = CC 0.4 weight = -1 [values] -material_print_temperature = =default_material_print_temperature support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_cffcpe_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_cffcpe_0.2mm.inst.cfg index 269b4253b6..066e75b485 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.4_cffcpe_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_cffcpe_0.2mm.inst.cfg @@ -12,7 +12,6 @@ variant = CC 0.4 weight = -2 [values] -material_print_temperature = =default_material_print_temperature support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_cffpa_0.15mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_cffpa_0.15mm.inst.cfg index 4cb3760edf..15f3b3e6a5 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.4_cffpa_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_cffpa_0.15mm.inst.cfg @@ -12,7 +12,6 @@ variant = CC 0.4 weight = -1 [values] -material_print_temperature = =default_material_print_temperature support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_cffpa_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_cffpa_0.2mm.inst.cfg index 12d6563333..52627f2a58 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.4_cffpa_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_cffpa_0.2mm.inst.cfg @@ -12,7 +12,6 @@ variant = CC 0.4 weight = -2 [values] -material_print_temperature = =default_material_print_temperature support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_gffcpe_0.15mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_gffcpe_0.15mm.inst.cfg index 94ca68f5a3..5e29f11222 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.4_gffcpe_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_gffcpe_0.15mm.inst.cfg @@ -12,7 +12,6 @@ variant = CC 0.4 weight = -1 [values] -material_print_temperature = =default_material_print_temperature support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_gffcpe_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_gffcpe_0.2mm.inst.cfg index d6d46eb402..85b50e6768 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.4_gffcpe_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_gffcpe_0.2mm.inst.cfg @@ -12,7 +12,6 @@ variant = CC 0.4 weight = -2 [values] -material_print_temperature = =default_material_print_temperature support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_gffpa_0.15mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_gffpa_0.15mm.inst.cfg index 547106628d..371f646cb6 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.4_gffpa_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_gffpa_0.15mm.inst.cfg @@ -12,7 +12,6 @@ variant = CC 0.4 weight = -1 [values] -material_print_temperature = =default_material_print_temperature support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_gffpa_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_gffpa_0.2mm.inst.cfg index e67d109b33..778637cf3f 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.4_gffpa_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_gffpa_0.2mm.inst.cfg @@ -12,7 +12,6 @@ variant = CC 0.4 weight = -2 [values] -material_print_temperature = =default_material_print_temperature support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.6_cffcpe_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.6_cffcpe_0.2mm.inst.cfg index 9fe6dca546..ad7c2f5877 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.6_cffcpe_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.6_cffcpe_0.2mm.inst.cfg @@ -12,7 +12,6 @@ variant = CC 0.6 weight = -2 [values] -material_print_temperature = =default_material_print_temperature support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.6_cffpa_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.6_cffpa_0.2mm.inst.cfg index 533a6414e1..72bd69f401 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.6_cffpa_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.6_cffpa_0.2mm.inst.cfg @@ -12,7 +12,6 @@ variant = CC 0.6 weight = -2 [values] -material_print_temperature = =default_material_print_temperature support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.6_gffcpe_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.6_gffcpe_0.2mm.inst.cfg index b9cea93f9a..8d68d5c92f 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.6_gffcpe_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.6_gffcpe_0.2mm.inst.cfg @@ -12,7 +12,6 @@ variant = CC 0.6 weight = -2 [values] -material_print_temperature = =default_material_print_temperature support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.6_gffpa_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.6_gffpa_0.2mm.inst.cfg index 44ea4a26db..6366ee8a7e 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.6_gffpa_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.6_gffpa_0.2mm.inst.cfg @@ -12,7 +12,6 @@ variant = CC 0.6 weight = -2 [values] -material_print_temperature = =default_material_print_temperature support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 diff --git a/resources/variants/ultimaker3_bb0.8.inst.cfg b/resources/variants/ultimaker3_bb0.8.inst.cfg index 0067e86bd9..62227f50f6 100644 --- a/resources/variants/ultimaker3_bb0.8.inst.cfg +++ b/resources/variants/ultimaker3_bb0.8.inst.cfg @@ -25,7 +25,6 @@ machine_nozzle_heat_up_speed = 1.5 machine_nozzle_id = BB 0.8 machine_nozzle_size = 0.8 machine_nozzle_tip_outer_diameter = 2.0 -material_print_temperature = =default_material_print_temperature + 10 multiple_mesh_overlap = 0 prime_tower_enable = False prime_tower_wipe_enabled = True diff --git a/resources/variants/ultimaker3_extended_bb0.8.inst.cfg b/resources/variants/ultimaker3_extended_bb0.8.inst.cfg index 1ca125b2ef..2a88f165e6 100644 --- a/resources/variants/ultimaker3_extended_bb0.8.inst.cfg +++ b/resources/variants/ultimaker3_extended_bb0.8.inst.cfg @@ -25,7 +25,6 @@ machine_nozzle_heat_up_speed = 1.5 machine_nozzle_id = BB 0.8 machine_nozzle_size = 0.8 machine_nozzle_tip_outer_diameter = 2.0 -material_print_temperature = =default_material_print_temperature + 10 multiple_mesh_overlap = 0 prime_tower_enable = False prime_tower_wipe_enabled = True diff --git a/resources/variants/ultimaker_s3_bb0.8.inst.cfg b/resources/variants/ultimaker_s3_bb0.8.inst.cfg index 4e749009ea..34e1b6d308 100644 --- a/resources/variants/ultimaker_s3_bb0.8.inst.cfg +++ b/resources/variants/ultimaker_s3_bb0.8.inst.cfg @@ -24,7 +24,6 @@ machine_nozzle_heat_up_speed = 1.5 machine_nozzle_id = BB 0.8 machine_nozzle_size = 0.8 machine_nozzle_tip_outer_diameter = 2.0 -material_print_temperature = =default_material_print_temperature + 10 multiple_mesh_overlap = 0 prime_tower_enable = False prime_tower_wipe_enabled = True diff --git a/resources/variants/ultimaker_s5_bb0.8.inst.cfg b/resources/variants/ultimaker_s5_bb0.8.inst.cfg index 1484241e9d..660a6b10f4 100644 --- a/resources/variants/ultimaker_s5_bb0.8.inst.cfg +++ b/resources/variants/ultimaker_s5_bb0.8.inst.cfg @@ -24,7 +24,6 @@ machine_nozzle_heat_up_speed = 1.5 machine_nozzle_id = BB 0.8 machine_nozzle_size = 0.8 machine_nozzle_tip_outer_diameter = 2.0 -material_print_temperature = =default_material_print_temperature + 10 multiple_mesh_overlap = 0 prime_tower_enable = False prime_tower_wipe_enabled = True diff --git a/resources/variants/ultimaker_s7_bb0.8.inst.cfg b/resources/variants/ultimaker_s7_bb0.8.inst.cfg index 95bcaef78f..6823fe18a4 100644 --- a/resources/variants/ultimaker_s7_bb0.8.inst.cfg +++ b/resources/variants/ultimaker_s7_bb0.8.inst.cfg @@ -24,7 +24,6 @@ machine_nozzle_heat_up_speed = 1.5 machine_nozzle_id = BB 0.8 machine_nozzle_size = 0.8 machine_nozzle_tip_outer_diameter = 2.0 -material_print_temperature = =default_material_print_temperature + 10 multiple_mesh_overlap = 0 prime_tower_enable = False prime_tower_wipe_enabled = True