material specific exceptions on the defaults

Some materials can handle higher unretract speeds. Also some unnecessary overwrites of the defaults are removed. PP-96
2025-08-09 06:45:09 -06:00 · 2022-02-22 14:24:47 +01:00 · 2022-02-22 14:24:47 +01:00 · 9b35dc18b5
commit 9b35dc18b5
parent 5632d85339
96 changed files with 82 additions and 46 deletions
--- a/resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.4_fast.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.4_fast.inst.cfg
@ -17,6 +17,8 @@ cool_min_layer_time = 3
 cool_min_layer_time_fan_speed_max = 15
 cool_min_speed = 10
 infill_sparse_density = 20
+retraction_combing_max_distance = 50
+retraction_prime_speed = =retraction_speed
 speed_layer_0 = =round(speed_print * 30 / 45)
 speed_print = 45
 speed_travel = 150
@ -26,5 +28,4 @@ wall_thickness = 0.7
 speed_wall_0 = =math.ceil(speed_print * 30 / 45)
 speed_topbottom = =math.ceil(speed_print * 30 / 45)
 speed_wall_x = =math.ceil(speed_print * 40 / 45)
-speed_infill = =math.ceil(speed_print * 45 / 45)
-retraction_combing_max_distance = 50
+speed_infill = =math.ceil(speed_print * 45 / 45)
--- a/resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.4_high.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.4_high.inst.cfg
@ -17,11 +17,12 @@ cool_min_layer_time = 2
 cool_min_layer_time_fan_speed_max = 15
 cool_min_speed = 15
 infill_sparse_density = 20
+retraction_combing_max_distance = 50
+retraction_prime_speed = =retraction_speed
 speed_layer_0 = =round(speed_print * 30 / 45)
 speed_print = 45
 speed_wall = =math.ceil(speed_print * 30 / 45)
 top_bottom_thickness = 0.72
 wall_thickness = 1.05
 speed_topbottom = =math.ceil(speed_print * 15 / 45)
-speed_infill = =math.ceil(speed_print * 45 / 45)
-retraction_combing_max_distance = 50
+speed_infill = =math.ceil(speed_print * 45 / 45)
--- a/resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.4_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.4_normal.inst.cfg
@ -17,9 +17,10 @@ cool_min_layer_time = 3
 cool_min_layer_time_fan_speed_max = 15
 cool_min_speed = 10
 infill_sparse_density = 20
+retraction_combing_max_distance = 50
+retraction_prime_speed = =retraction_speed
 speed_layer_0 = =round(speed_print * 30 / 45)
 speed_print = 45
 speed_wall = =math.ceil(speed_print * 30 / 45)
 top_bottom_thickness = 0.8
-wall_thickness = 1.05
-retraction_combing_max_distance = 50
+wall_thickness = 1.05
--- a/resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.6_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.6_normal.inst.cfg
@ -17,8 +17,9 @@ cool_min_layer_time = 5
 cool_min_layer_time_fan_speed_max = 20
 cool_min_speed = 8
 infill_sparse_density = 20
+retraction_combing_max_distance = 50
+retraction_prime_speed = =retraction_speed
 speed_layer_0 = =round(speed_print * 30 / 40)
 speed_print = 40
 top_bottom_thickness = 1.2
 wall_thickness = 1.59
-retraction_combing_max_distance = 50
--- a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_draft.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_draft.inst.cfg
@ -26,6 +26,8 @@ raft_interface_line_spacing = 1
 raft_interface_line_width = 0.8
 raft_margin = 15
 raft_surface_line_width = 0.38
+retraction_combing_max_distance = 50
+retraction_prime_speed = =retraction_speed
 speed_layer_0 = =math.ceil(speed_print * 15 / 25)
 speed_print = 25
 speed_topbottom = =math.ceil(speed_print * 20 / 25)
@ -37,5 +39,4 @@ support_infill_rate = =0 if support_enable and support_structure == 'tree' else
 support_pattern = lines
 support_z_distance = 0.26
 top_bottom_thickness = 1.5
-wall_thickness = 1.14
-retraction_combing_max_distance = 50
+wall_thickness = 1.14
--- a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_normal.inst.cfg
@ -26,6 +26,8 @@ raft_interface_line_spacing = 1
 raft_interface_line_width = 0.8
 raft_margin = 15
 raft_surface_line_width = 0.38
+retraction_combing_max_distance = 50
+retraction_prime_speed = =retraction_speed
 speed_layer_0 = =math.ceil(speed_print * 15 / 35)
 speed_print = 35
 speed_topbottom = =math.ceil(speed_print * 20 / 35)
@ -37,5 +39,4 @@ support_infill_rate = =0 if support_enable and support_structure == 'tree' else
 support_pattern = lines
 support_z_distance = 0.26
 top_bottom_thickness = 1.5
-wall_thickness = 1.14
-retraction_combing_max_distance = 50
+wall_thickness = 1.14
--- a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_draft.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_draft.inst.cfg
@ -27,6 +27,8 @@ raft_interface_line_width = 1.2
 raft_margin = 15
 raft_surface_line_width = 0.57
 raft_surface_thickness = 0.2
+retraction_combing_max_distance = 50
+retraction_prime_speed = =retraction_speed
 speed_layer_0 = =round(speed_print * 30 / 50)
 speed_print = 25
 speed_topbottom = =math.ceil(speed_print * 20 / 25)
@ -41,5 +43,4 @@ support_pattern = lines
 support_xy_distance = 0.6
 support_z_distance = 0.22
 top_bottom_thickness = 0.75
-wall_thickness = 1.14
-retraction_combing_max_distance = 50
+wall_thickness = 1.14
--- a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_normal.inst.cfg
@ -27,6 +27,8 @@ raft_interface_line_width = 1.2
 raft_margin = 15
 raft_surface_line_width = 0.57
 raft_surface_thickness = 0.2
+retraction_combing_max_distance = 50
+retraction_prime_speed = =retraction_speed
 speed_layer_0 = =math.ceil(speed_print * 30 / 35)
 speed_print = 35
 speed_topbottom = =math.ceil(speed_print * 20 / 35)
@ -41,5 +43,4 @@ support_pattern = lines
 support_xy_distance = 0.6
 support_z_distance = 0.22
 top_bottom_thickness = 0.75
-wall_thickness = 1.14
-retraction_combing_max_distance = 50
+wall_thickness = 1.14
--- a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.4_fast.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.4_fast.inst.cfg
@ -26,6 +26,7 @@ raft_interface_line_width = 0.8
 raft_margin = 15
 raft_surface_line_width = 0.5
 raft_surface_thickness = 0.15
+retraction_prime_speed = =retraction_speed
 speed_layer_0 = =math.ceil(speed_print * 30 / 45)
 speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 20 / 45)
--- a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.4_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.4_normal.inst.cfg
@ -26,6 +26,7 @@ raft_interface_line_width = 0.8
 raft_margin = 15
 raft_surface_line_width = 0.5
 raft_surface_thickness = 0.15
+retraction_prime_speed = =retraction_speed
 speed_layer_0 = =math.ceil(speed_print * 30 / 45)
 speed_print = 45
 speed_travel = 150
--- a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.6_fast.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.6_fast.inst.cfg
@ -27,6 +27,7 @@ raft_margin = 15
 raft_surface_line_width = 0.6
 raft_surface_thickness = 0.15
 retraction_hop_enabled = 0.2
+retraction_prime_speed = =retraction_speed
 speed_layer_0 = =math.ceil(speed_print * 30 / 55)
 speed_print = 55
 speed_support = 40
--- a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.6_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.6_normal.inst.cfg
@ -27,6 +27,7 @@ raft_margin = 15
 raft_surface_line_width = 0.6
 raft_surface_thickness = 0.15
 retraction_hop_enabled = 0.2
+retraction_prime_speed = =retraction_speed
 speed_layer_0 = =math.ceil(speed_print * 30 / 55)
 speed_print = 55
 speed_support = 40
--- a/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.4_draft.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.4_draft.inst.cfg
@ -15,6 +15,7 @@ variant = 0.4 mm
 cool_min_layer_time = 5
 cool_min_speed = 10
 infill_sparse_density = 20
+retraction_prime_speed = =retraction_speed
 speed_layer_0 = =round(speed_print * 30 / 60)
 speed_print = 60
 speed_topbottom = =math.ceil(speed_print * 30 / 60)
--- a/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.4_fast.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.4_fast.inst.cfg
@ -15,6 +15,7 @@ variant = 0.4 mm
 cool_min_layer_time = 5
 cool_min_speed = 10
 infill_sparse_density = 20
+retraction_prime_speed = =retraction_speed
 speed_layer_0 = =round(speed_print * 30 / 60)
 speed_print = 60
 speed_topbottom = =math.ceil(speed_print * 30 / 60)
--- a/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.4_high.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.4_high.inst.cfg
@ -15,6 +15,7 @@ variant = 0.4 mm
 cool_min_layer_time = 5
 cool_min_speed = 10
 infill_sparse_density = 20
+retraction_prime_speed = =retraction_speed
 speed_layer_0 = =round(speed_print * 30 / 50)
 speed_print = 50
 speed_topbottom = =math.ceil(speed_print * 20 / 50)
--- a/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.4_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.4_normal.inst.cfg
@ -15,6 +15,7 @@ variant = 0.4 mm
 cool_min_layer_time = 5
 cool_min_speed = 10
 infill_sparse_density = 20
+retraction_prime_speed = =retraction_speed
 speed_layer_0 = =round(speed_print * 30 / 50)
 speed_print = 50
 speed_topbottom = =math.ceil(speed_print * 20 / 50)
--- a/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.6_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.6_normal.inst.cfg
@ -15,6 +15,7 @@ variant = 0.6 mm
 cool_min_layer_time = 5
 cool_min_speed = 10
 infill_sparse_density = 20
+retraction_prime_speed = =retraction_speed
 speed_layer_0 = =round(speed_print * 30 / 55)
 speed_print = 55
 speed_topbottom = =math.ceil(speed_print * 20 / 55)
--- a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_fast.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_fast.inst.cfg
@ -45,7 +45,6 @@ retraction_hop = 0.15
 retraction_hop_enabled = True
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.5
-retraction_prime_speed = 15
 skin_overlap = 10
 speed_layer_0 = =speed_print
 speed_prime_tower = =speed_topbottom
--- a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_normal.inst.cfg
@ -45,7 +45,6 @@ retraction_hop = 0.15
 retraction_hop_enabled = True
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.5
-retraction_prime_speed = 15
 skin_overlap = 10
 speed_layer_0 = =speed_print
 speed_prime_tower = =speed_topbottom
--- a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_draft.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_draft.inst.cfg
@ -44,7 +44,6 @@ retraction_extrusion_window = 1
 retraction_hop = 0.15
 retraction_hop_enabled = True
 retraction_hop_only_when_collides = True
-retraction_prime_speed = 15
 skin_overlap = 10
 speed_layer_0 = =speed_print
 speed_prime_tower = =speed_topbottom
--- a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_fast.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_fast.inst.cfg
@ -44,7 +44,6 @@ retraction_extrusion_window = 1
 retraction_hop = 0.15
 retraction_hop_enabled = True
 retraction_hop_only_when_collides = True
-retraction_prime_speed = 15
 skin_overlap = 10
 speed_layer_0 = =speed_print
 speed_prime_tower = =speed_topbottom
--- a/resources/quality/ultimaker2_plus_connect/um2pc_tpla_0.4_draft.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_tpla_0.4_draft.inst.cfg
@ -15,6 +15,7 @@ variant = 0.4 mm
 cool_min_layer_time = 5
 cool_min_speed = 10
 infill_sparse_density = 20
+retraction_prime_speed = =retraction_speed
 speed_layer_0 = =round(speed_print * 30 / 50)
 speed_print = 50
 speed_topbottom = =math.ceil(speed_print * 30 / 50)
--- a/resources/quality/ultimaker2_plus_connect/um2pc_tpla_0.4_fast.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_tpla_0.4_fast.inst.cfg
@ -15,6 +15,7 @@ variant = 0.4 mm
 cool_min_layer_time = 5
 cool_min_speed = 10
 infill_sparse_density = 20
+retraction_prime_speed = =retraction_speed
 speed_layer_0 = =round(speed_print * 30 / 40)
 speed_print = 40
 speed_topbottom = =math.ceil(speed_print * 30 / 40)
--- a/resources/quality/ultimaker2_plus_connect/um2pc_tpla_0.4_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_tpla_0.4_normal.inst.cfg
@ -15,6 +15,7 @@ variant = 0.4 mm
 cool_min_layer_time = 5
 cool_min_speed = 10
 infill_sparse_density = 20
+retraction_prime_speed = =retraction_speed
 speed_layer_0 = =round(speed_print * 30 / 40)
 speed_print = 40
 speed_topbottom = =math.ceil(speed_print * 20 / 40)
--- a/resources/quality/ultimaker2_plus_connect/um2pc_tpla_0.6_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_tpla_0.6_normal.inst.cfg
@ -15,6 +15,7 @@ variant = 0.6 mm
 cool_min_layer_time = 5
 cool_min_speed = 10
 infill_sparse_density = 20
+retraction_prime_speed = =retraction_speed
 speed_layer_0 = =round(speed_print * 30 / 50)
 speed_print = 50
 speed_topbottom = =math.ceil(speed_print * 20 / 50)
--- a/resources/quality/ultimaker_s3/um_s3_aa0.25_ABS_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_ABS_Normal_Quality.inst.cfg
@ -15,6 +15,5 @@ variant = AA 0.25
 cool_fan_speed = 40
 infill_overlap = =0 if infill_sparse_density > 80 else 15
 material_final_print_temperature = =material_print_temperature - 5
-retraction_prime_speed = 25
 speed_topbottom = =math.ceil(speed_print * 30 / 55)
 wall_thickness = 0.92
--- a/resources/quality/ultimaker_s3/um_s3_aa0.25_PC_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_PC_Normal_Quality.inst.cfg
@ -34,7 +34,6 @@ retraction_count_max = 80
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
-retraction_prime_speed = 15
 skin_overlap = 30
 speed_layer_0 = =math.ceil(speed_print * 25 / 50)
 speed_print = 50
--- a/resources/quality/ultimaker_s3/um_s3_aa0.25_PP_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_PP_Normal_Quality.inst.cfg
@ -37,7 +37,7 @@ retraction_extrusion_window = 6.5
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
-retraction_prime_speed = 13
+retraction_prime_speed = 15
 speed_layer_0 = =math.ceil(speed_print * 15 / 25)
 speed_print = 25
 speed_travel_layer_0 = 50
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Draft_Print.inst.cfg
@ -32,6 +32,7 @@ retraction_extrusion_window = 1
 retraction_hop = 0.2
 retraction_hop_enabled = False
 retraction_hop_only_when_collides = True
+retraction_prime_speed = =retraction_speed
 skin_overlap = 20
 speed_layer_0 = =math.ceil(speed_print * 20 / 50)
 speed_print = 50
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Fast_Print.inst.cfg
@ -32,6 +32,7 @@ retraction_extrusion_window = 1
 retraction_hop = 0.2
 retraction_hop_enabled = False
 retraction_hop_only_when_collides = True
+retraction_prime_speed = =retraction_speed
 skin_overlap = 20
 speed_layer_0 = =math.ceil(speed_print * 20 / 45)
 speed_print = 45
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_High_Quality.inst.cfg
@ -34,6 +34,7 @@ retraction_extrusion_window = 1
 retraction_hop = 0.2
 retraction_hop_enabled = False
 retraction_hop_only_when_collides = True
+retraction_prime_speed = =retraction_speed
 skin_overlap = 20
 speed_layer_0 = =math.ceil(speed_print * 20 / 40)
 speed_print = 40
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Normal_Quality.inst.cfg
@ -34,6 +34,7 @@ retraction_extrusion_window = 1
 retraction_hop = 0.2
 retraction_hop_enabled = False
 retraction_hop_only_when_collides = True
+retraction_prime_speed = =retraction_speed
 skin_overlap = 20
 speed_layer_0 = =math.ceil(speed_print * 20 / 40)
 speed_print = 40
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_Draft_Print.inst.cfg
@ -16,6 +16,7 @@ material_print_temperature = =default_material_print_temperature + 10
 material_initial_print_temperature = =material_print_temperature - 5
 material_final_print_temperature = =material_print_temperature - 10
 retraction_combing_max_distance = 50
+retraction_prime_speed = =retraction_speed
 skin_overlap = 20
 speed_print = 60
 speed_layer_0 = =math.ceil(speed_print * 20 / 60)
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_Fast_Print.inst.cfg
@ -17,6 +17,7 @@ material_print_temperature = =default_material_print_temperature + 5
 material_initial_print_temperature = =material_print_temperature - 5
 material_final_print_temperature = =material_print_temperature - 10
 retraction_combing_max_distance = 50
+retraction_prime_speed = =retraction_speed
 speed_print = 60
 speed_layer_0 = =math.ceil(speed_print * 20 / 60)
 speed_topbottom = =math.ceil(speed_print * 30 / 60)
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_High_Quality.inst.cfg
@ -19,6 +19,7 @@ material_print_temperature = =default_material_print_temperature - 5
 material_initial_print_temperature = =material_print_temperature - 5
 material_final_print_temperature = =material_print_temperature - 10
 retraction_combing_max_distance = 50
+retraction_prime_speed = =retraction_speed
 speed_print = 50
 speed_layer_0 = =math.ceil(speed_print * 20 / 50)
 speed_topbottom = =math.ceil(speed_print * 30 / 50)
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_Normal_Quality.inst.cfg
@ -17,6 +17,7 @@ machine_nozzle_heat_up_speed = 1.5
 material_initial_print_temperature = =material_print_temperature - 5
 material_final_print_temperature = =material_print_temperature - 10
 retraction_combing_max_distance = 50
+retraction_prime_speed = =retraction_speed
 speed_print = 55
 speed_layer_0 = =math.ceil(speed_print * 20 / 55)
 speed_topbottom = =math.ceil(speed_print * 30 / 55)
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Draft_Print.inst.cfg
@ -28,6 +28,7 @@ raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
 raft_jerk = =jerk_layer_0
 raft_margin = 10
 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2)
+retraction_prime_speed = =retraction_speed
 skin_overlap = 50
 speed_layer_0 = 10
 switch_extruder_prime_speed = 30
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print.inst.cfg
@ -28,6 +28,7 @@ raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
 raft_jerk = =jerk_layer_0
 raft_margin = 10
 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2)
+retraction_prime_speed = =retraction_speed
 skin_overlap = 50
 speed_layer_0 = 10
 switch_extruder_prime_speed = 30
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_High_Quality.inst.cfg
@ -27,6 +27,7 @@ raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
 raft_jerk = =jerk_layer_0
 raft_margin = 10
 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2)
+retraction_prime_speed = =retraction_speed
 skin_overlap = 50
 speed_layer_0 = 10
 switch_extruder_prime_speed = 30
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality.inst.cfg
@ -27,6 +27,7 @@ raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
 raft_jerk = =jerk_layer_0
 raft_margin = 10
 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2)
+retraction_prime_speed = =retraction_speed
 skin_overlap = 50
 speed_layer_0 = 10
 switch_extruder_prime_speed = 30
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Draft_Print.inst.cfg
@ -43,7 +43,6 @@ retraction_extrusion_window = 1
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
-retraction_prime_speed = 15
 skin_overlap = 30
 speed_layer_0 = =math.ceil(speed_print * 25 / 50)
 speed_print = 50
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg
@ -41,7 +41,6 @@ retraction_extrusion_window = 1
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
-retraction_prime_speed = 15
 skin_overlap = 30
 speed_layer_0 = =math.ceil(speed_print * 25 / 50)
 speed_print = 50
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_High_Quality.inst.cfg
@ -43,7 +43,6 @@ retraction_extrusion_window = 1
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
-retraction_prime_speed = 15
 skin_overlap = 30
 speed_layer_0 = =math.ceil(speed_print * 25 / 50)
 speed_print = 50
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality.inst.cfg
@ -41,7 +41,6 @@ retraction_extrusion_window = 1
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
-retraction_prime_speed = 15
 skin_overlap = 30
 speed_layer_0 = =math.ceil(speed_print * 25 / 50)
 speed_print = 50
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print.inst.cfg
@ -19,6 +19,7 @@ machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature + 5
 material_standby_temperature = 100
 prime_tower_enable = False
+retraction_prime_speed = =retraction_speed
 skin_overlap = 20
 speed_layer_0 = 10
 speed_topbottom = =math.ceil(speed_print * 40 / 70)
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print.inst.cfg
@ -18,6 +18,7 @@ machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_standby_temperature = 100
 prime_tower_enable = False
+retraction_prime_speed = =retraction_speed
 speed_print = 70
 speed_layer_0 = 10
 speed_topbottom = =math.ceil(speed_print * 35 / 70)
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_High_Quality.inst.cfg
@ -20,6 +20,7 @@ machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature - 5
 material_standby_temperature = 100
 prime_tower_enable = False
+retraction_prime_speed = =retraction_speed
 skin_overlap = 10
 speed_print = 50
 speed_layer_0 = 10
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality.inst.cfg
@ -19,6 +19,7 @@ machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_standby_temperature = 100
 prime_tower_enable = False
+retraction_prime_speed = =retraction_speed
 skin_overlap = 10
 speed_layer_0 = 10
 top_bottom_thickness = 1
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_VeryDraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_VeryDraft_Print.inst.cfg
@ -34,6 +34,7 @@ machine_nozzle_heat_up_speed = 1.6
 material_standby_temperature = 100

 prime_tower_enable = False
+retraction_prime_speed = =retraction_speed
 skin_edge_support_thickness = =0.9 if infill_sparse_density < 30 else 0
 skin_overlap = 20

--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Draft_Print.inst.cfg
@ -42,7 +42,6 @@ retraction_extrusion_window = 1
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
-retraction_prime_speed = 18
 speed_layer_0 = =math.ceil(speed_print * 15 / 25)
 speed_print = 25
 speed_topbottom = =math.ceil(speed_print * 25 / 25)
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Fast_Print.inst.cfg
@ -41,7 +41,6 @@ retraction_extrusion_window = 1
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
-retraction_prime_speed = 18
 speed_layer_0 = =math.ceil(speed_print * 15 / 25)
 speed_print = 25
 speed_topbottom = =math.ceil(speed_print * 25 / 25)
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Normal_Quality.inst.cfg
@ -43,7 +43,6 @@ retraction_extrusion_window = 1
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
-retraction_prime_speed = 18
 speed_layer_0 = =math.ceil(speed_print * 15 / 25)
 speed_print = 25
 speed_topbottom = =math.ceil(speed_print * 25 / 25)
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Draft_Print.inst.cfg
@ -23,6 +23,7 @@ machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature -10
 material_standby_temperature = 100
 prime_tower_enable = False
+retraction_prime_speed = =retraction_speed
 skin_overlap = 20
 speed_layer_0 = =math.ceil(speed_print * 20 / 50)
 speed_print = 50
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Print.inst.cfg
@ -20,6 +20,7 @@ machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature -10
 material_standby_temperature = 100
 prime_tower_enable = False
+retraction_prime_speed = =retraction_speed
 speed_layer_0 = =math.ceil(speed_print * 20 / 45)
 speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 35 / 45)
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_High_Quality.inst.cfg
@ -20,6 +20,7 @@ machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature - 15
 material_standby_temperature = 100
 prime_tower_enable = False
+retraction_prime_speed = =retraction_speed
 skin_overlap = 10
 speed_print = 45
 speed_layer_0 = =math.ceil(speed_print * 20 / 45)
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Normal_Quality.inst.cfg
@ -21,6 +21,7 @@ machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature - 15
 material_standby_temperature = 100
 prime_tower_enable = False
+retraction_prime_speed = =retraction_speed
 skin_overlap = 10
 speed_layer_0 = =math.ceil(speed_print * 20 / 45)
 speed_print = 45
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_VeryDraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_VeryDraft_Print.inst.cfg
@ -34,6 +34,7 @@ machine_nozzle_heat_up_speed = 1.6
 material_standby_temperature = 100

 prime_tower_enable = False
+retraction_prime_speed = =retraction_speed
 skin_edge_support_thickness = =0.9 if infill_sparse_density < 30 else 0
 skin_overlap = 20

--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Draft_Print.inst.cfg
@ -41,7 +41,6 @@ retraction_extra_prime_amount = 0.8
 retraction_extrusion_window = 1
 retraction_hop_only_when_collides = True
 retraction_min_travel = =line_width * 2
-retraction_prime_speed = 15
 skin_line_width = =round(line_width / 0.8, 2)
 skin_overlap = 5
 speed_layer_0 = =math.ceil(speed_print * 18 / 25)
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Fast_Print.inst.cfg
@ -41,7 +41,6 @@ retraction_extra_prime_amount = 0.8
 retraction_extrusion_window = 1
 retraction_hop_only_when_collides = True
 retraction_min_travel = =line_width * 2
-retraction_prime_speed = 15
 skin_line_width = =round(line_width / 0.8, 2)
 skin_overlap = 5
 speed_layer_0 = =math.ceil(speed_print * 18 / 25)
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Normal_Quality.inst.cfg
@ -40,7 +40,6 @@ retraction_extra_prime_amount = 0.8
 retraction_extrusion_window = 1
 retraction_hop_only_when_collides = True
 retraction_min_travel = =line_width * 2
-retraction_prime_speed = 15
 skin_line_width = =round(line_width / 0.8, 2)
 skin_overlap = 5
 speed_layer_0 = =math.ceil(speed_print * 18 / 25)
--- a/resources/quality/ultimaker_s5/um_s5_aa0.25_ABS_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_ABS_Normal_Quality.inst.cfg
@ -15,6 +15,5 @@ variant = AA 0.25
 cool_fan_speed = 40
 infill_overlap = =0 if infill_sparse_density > 80 else 15
 material_final_print_temperature = =material_print_temperature - 5
-retraction_prime_speed = 25
 speed_topbottom = =math.ceil(speed_print * 30 / 55)
 wall_thickness = 0.92
--- a/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg
@ -34,7 +34,6 @@ retraction_count_max = 80
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
-retraction_prime_speed = 15
 skin_overlap = 30
 speed_layer_0 = =math.ceil(speed_print * 25 / 50)
 speed_print = 50
--- a/resources/quality/ultimaker_s5/um_s5_aa0.25_PP_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_PP_Normal_Quality.inst.cfg
@ -37,7 +37,7 @@ retraction_extrusion_window = 6.5
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
-retraction_prime_speed = 13
+retraction_prime_speed = 15
 speed_layer_0 = =math.ceil(speed_print * 15 / 25)
 speed_print = 25
 speed_travel_layer_0 = 50
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Draft_Print.inst.cfg
@ -32,6 +32,7 @@ retraction_extrusion_window = 1
 retraction_hop = 0.2
 retraction_hop_enabled = False
 retraction_hop_only_when_collides = True
+retraction_prime_speed = =retraction_speed
 skin_overlap = 20
 speed_layer_0 = =math.ceil(speed_print * 20 / 50)
 speed_print = 50
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print.inst.cfg
@ -32,6 +32,7 @@ retraction_extrusion_window = 1
 retraction_hop = 0.2
 retraction_hop_enabled = False
 retraction_hop_only_when_collides = True
+retraction_prime_speed = =retraction_speed
 skin_overlap = 20
 speed_layer_0 = =math.ceil(speed_print * 20 / 45)
 speed_print = 45
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_High_Quality.inst.cfg
@ -34,6 +34,7 @@ retraction_extrusion_window = 1
 retraction_hop = 0.2
 retraction_hop_enabled = False
 retraction_hop_only_when_collides = True
+retraction_prime_speed = =retraction_speed
 skin_overlap = 20
 speed_layer_0 = =math.ceil(speed_print * 20 / 40)
 speed_print = 40
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality.inst.cfg
@ -33,6 +33,7 @@ retraction_extrusion_window = 1
 retraction_hop = 0.2
 retraction_hop_enabled = False
 retraction_hop_only_when_collides = True
+retraction_prime_speed = =retraction_speed
 skin_overlap = 20
 speed_layer_0 = =math.ceil(speed_print * 20 / 40)
 speed_print = 40
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Draft_Print.inst.cfg
@ -16,6 +16,7 @@ material_print_temperature = =default_material_print_temperature + 10
 material_initial_print_temperature = =material_print_temperature - 5
 material_final_print_temperature = =material_print_temperature - 10
 retraction_combing_max_distance = 50
+retraction_prime_speed = =retraction_speed
 skin_edge_support_thickness = =0.8 if infill_sparse_density < 30 else 0
 skin_overlap = 20
 speed_print = 60
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Fast_Print.inst.cfg
@ -17,6 +17,7 @@ material_print_temperature = =default_material_print_temperature + 5
 material_initial_print_temperature = =material_print_temperature - 5
 material_final_print_temperature = =material_print_temperature - 10
 retraction_combing_max_distance = 50
+retraction_prime_speed = =retraction_speed
 speed_print = 60
 speed_layer_0 = =math.ceil(speed_print * 20 / 60)
 speed_topbottom = =math.ceil(speed_print * 30 / 60)
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_High_Quality.inst.cfg
@ -19,6 +19,7 @@ material_print_temperature = =default_material_print_temperature - 5
 material_initial_print_temperature = =material_print_temperature - 5
 material_final_print_temperature = =material_print_temperature - 10
 retraction_combing_max_distance = 50
+retraction_prime_speed = =retraction_speed
 speed_print = 50
 speed_layer_0 = =math.ceil(speed_print * 20 / 50)
 speed_topbottom = =math.ceil(speed_print * 30 / 50)
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Normal_Quality.inst.cfg
@ -17,6 +17,7 @@ machine_nozzle_heat_up_speed = 1.5
 material_initial_print_temperature = =material_print_temperature - 5
 material_final_print_temperature = =material_print_temperature - 10
 retraction_combing_max_distance = 50
+retraction_prime_speed = =retraction_speed
 speed_print = 55
 speed_layer_0 = =math.ceil(speed_print * 20 / 55)
 speed_topbottom = =math.ceil(speed_print * 30 / 55)
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Draft_Print.inst.cfg
@ -26,6 +26,7 @@ raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
 raft_jerk = =jerk_layer_0
 raft_margin = 10
 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2)
+retraction_prime_speed = =retraction_speed
 skin_overlap = 50
 speed_layer_0 = 10
 switch_extruder_prime_speed = 30
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print.inst.cfg
@ -28,6 +28,7 @@ raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
 raft_jerk = =jerk_layer_0
 raft_margin = 10
 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2)
+retraction_prime_speed = =retraction_speed
 skin_overlap = 50
 speed_layer_0 = 10
 switch_extruder_prime_speed = 30
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_High_Quality.inst.cfg
@ -27,6 +27,7 @@ raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
 raft_jerk = =jerk_layer_0
 raft_margin = 10
 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2)
+retraction_prime_speed = =retraction_speed
 skin_overlap = 50
 speed_layer_0 = 10
 switch_extruder_prime_speed = 30
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality.inst.cfg
@ -27,6 +27,7 @@ raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
 raft_jerk = =jerk_layer_0
 raft_margin = 10
 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2)
+retraction_prime_speed = =retraction_speed
 skin_overlap = 50
 speed_layer_0 = 10
 switch_extruder_prime_speed = 30
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Draft_Print.inst.cfg
@ -42,7 +42,6 @@ retraction_extrusion_window = 1
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
-retraction_prime_speed = 15
 skin_overlap = 30
 speed_layer_0 = =math.ceil(speed_print * 25 / 50)
 speed_print = 50
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg
@ -41,7 +41,6 @@ retraction_extrusion_window = 1
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
-retraction_prime_speed = 15
 skin_overlap = 30
 speed_layer_0 = =math.ceil(speed_print * 25 / 50)
 speed_print = 50
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_High_Quality.inst.cfg
@ -43,7 +43,6 @@ retraction_extrusion_window = 1
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
-retraction_prime_speed = 15
 skin_overlap = 30
 speed_layer_0 = =math.ceil(speed_print * 25 / 50)
 speed_print = 50
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality.inst.cfg
@ -41,7 +41,6 @@ retraction_extrusion_window = 1
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
-retraction_prime_speed = 15
 skin_overlap = 30
 speed_layer_0 = =math.ceil(speed_print * 25 / 50)
 speed_print = 50
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print.inst.cfg
@ -19,6 +19,7 @@ machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature + 5
 material_standby_temperature = 100
 prime_tower_enable = False
+retraction_prime_speed = =retraction_speed
 skin_edge_support_thickness = =0.8 if infill_sparse_density < 30 else 0
 skin_overlap = 20
 speed_layer_0 = 10
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print.inst.cfg
@ -18,6 +18,7 @@ machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_standby_temperature = 100
 prime_tower_enable = False
+retraction_prime_speed = =retraction_speed
 speed_print = 70
 speed_layer_0 = 10
 speed_topbottom = =math.ceil(speed_print * 35 / 70)
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_High_Quality.inst.cfg
@ -20,6 +20,7 @@ machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature - 5
 material_standby_temperature = 100
 prime_tower_enable = False
+retraction_prime_speed = =retraction_speed
 skin_overlap = 10
 speed_print = 50
 speed_layer_0 = 10
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality.inst.cfg
@ -19,6 +19,7 @@ machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_standby_temperature = 100
 prime_tower_enable = False
+retraction_prime_speed = =retraction_speed
 skin_overlap = 10
 speed_layer_0 = 10
 top_bottom_thickness = 1
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_VeryDraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_VeryDraft_Print.inst.cfg
@ -34,6 +34,7 @@ machine_nozzle_heat_up_speed = 1.6
 material_standby_temperature = 100

 prime_tower_enable = False
+retraction_prime_speed = =retraction_speed
 skin_edge_support_thickness = =0.9 if infill_sparse_density < 30 else 0
 skin_overlap = 20

--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Draft_Print.inst.cfg
@ -43,7 +43,6 @@ retraction_extrusion_window = 1
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
-retraction_prime_speed = 18
 speed_layer_0 = =math.ceil(speed_print * 15 / 25)
 speed_print = 25
 speed_topbottom = =math.ceil(speed_print * 25 / 25)
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Fast_Print.inst.cfg
@ -43,7 +43,6 @@ retraction_extrusion_window = 1
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
-retraction_prime_speed = 18
 speed_layer_0 = =math.ceil(speed_print * 15 / 25)
 speed_print = 25
 speed_topbottom = =math.ceil(speed_print * 25 / 25)
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Normal_Quality.inst.cfg
@ -43,7 +43,6 @@ retraction_extrusion_window = 1
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
-retraction_prime_speed = 18
 speed_layer_0 = =math.ceil(speed_print * 15 / 25)
 speed_print = 25
 speed_topbottom = =math.ceil(speed_print * 25 / 25)
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Draft_Print.inst.cfg
@ -23,6 +23,7 @@ machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature -10
 material_standby_temperature = 100
 prime_tower_enable = False
+retraction_prime_speed = =retraction_speed
 skin_overlap = 20
 speed_layer_0 = =math.ceil(speed_print * 20 / 50)
 speed_print = 50
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Print.inst.cfg
@ -20,6 +20,7 @@ machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature -10
 material_standby_temperature = 100
 prime_tower_enable = False
+retraction_prime_speed = =retraction_speed
 speed_layer_0 = =math.ceil(speed_print * 20 / 45)
 speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 35 / 45)
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_High_Quality.inst.cfg
@ -20,6 +20,7 @@ machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature - 15
 material_standby_temperature = 100
 prime_tower_enable = False
+retraction_prime_speed = =retraction_speed
 skin_overlap = 10
 speed_print = 45
 speed_layer_0 = =math.ceil(speed_print * 20 / 45)
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Quality.inst.cfg
@ -21,6 +21,7 @@ machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature - 15
 material_standby_temperature = 100
 prime_tower_enable = False
+retraction_prime_speed = =retraction_speed
 skin_overlap = 10
 speed_layer_0 = =math.ceil(speed_print * 20 / 45)
 speed_print = 45
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_VeryDraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_VeryDraft_Print.inst.cfg
@ -34,6 +34,7 @@ machine_nozzle_heat_up_speed = 1.6
 material_standby_temperature = 100

 prime_tower_enable = False
+retraction_prime_speed = =retraction_speed
 skin_edge_support_thickness = =0.9 if infill_sparse_density < 30 else 0
 skin_overlap = 20

--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Draft_Print.inst.cfg
@ -41,7 +41,6 @@ retraction_extra_prime_amount = 0.8
 retraction_extrusion_window = 1
 retraction_hop_only_when_collides = True
 retraction_min_travel = =line_width * 2
-retraction_prime_speed = 15
 skin_line_width = =round(line_width / 0.8, 2)
 skin_overlap = 5
 speed_layer_0 = =math.ceil(speed_print * 18 / 25)
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Fast_Print.inst.cfg
@ -41,7 +41,6 @@ retraction_extra_prime_amount = 0.8
 retraction_extrusion_window = 1
 retraction_hop_only_when_collides = True
 retraction_min_travel = =line_width * 2
-retraction_prime_speed = 15
 skin_line_width = =round(line_width / 0.8, 2)
 skin_overlap = 5
 speed_layer_0 = =math.ceil(speed_print * 18 / 25)
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Normal_Quality.inst.cfg
@ -40,7 +40,6 @@ retraction_extra_prime_amount = 0.8
 retraction_extrusion_window = 1
 retraction_hop_only_when_collides = True
 retraction_min_travel = =line_width * 2
-retraction_prime_speed = 15
 skin_line_width = =round(line_width / 0.8, 2)
 skin_overlap = 5
 speed_layer_0 = =math.ceil(speed_print * 18 / 25)
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg
@ -34,7 +34,6 @@ retraction_extra_prime_amount = 0.5
 retraction_hop = 1.5
 retraction_hop_only_when_collides = False
 retraction_min_travel = =line_width * 2
-retraction_prime_speed = 15
 speed_print = 30
 speed_topbottom = =math.ceil(speed_print * 20 / 30)
 speed_wall = =math.ceil(speed_print * 30 / 30)