diff --git a/plugins/Toolbox/src/Toolbox.py b/plugins/Toolbox/src/Toolbox.py
index f204445218..085c5d1bde 100644
--- a/plugins/Toolbox/src/Toolbox.py
+++ b/plugins/Toolbox/src/Toolbox.py
@@ -561,7 +561,13 @@ class Toolbox(QObject, Extension):
                 self._download_reply.downloadProgress.disconnect(self._onDownloadProgress)
             except (TypeError, RuntimeError):  # Raised when the method is not connected to the signal yet.
                 pass  # Don't need to disconnect.
-            self._download_reply.abort()
+            try:
+                self._download_reply.abort()
+            except RuntimeError:
+                # In some cases the garbage collector is a bit to agressive, which causes the dowload_reply
+                # to be deleted (especially if the machine has been put to sleep). As we don't know what exactly causes
+                # this (The issue probably lives in the bowels of (py)Qt somewhere), we can only catch and ignore it.
+                pass
         self._download_reply = None
         self._download_request = None
         self.setDownloadProgress(0)
diff --git a/resources/definitions/alya3dp.def.json b/resources/definitions/alya3dp.def.json
index f449a89970..7187048da0 100644
--- a/resources/definitions/alya3dp.def.json
+++ b/resources/definitions/alya3dp.def.json
@@ -44,7 +44,7 @@
         },
         "machine_end_gcode":
         {
-            "default_value": ";End GCode\nM104 S0 ;extruder heater off \nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nG28 Z0\nM84 ;steppers off\nG90 ;absolute positioning\n;{profile_string}"
+            "default_value": ";End GCode\nM104 S0 ;extruder heater off \nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F{speed_travel} ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nG28 Z0\nM84 ;steppers off\nG90 ;absolute positioning\n;{profile_string}"
         }
     }
 }
\ No newline at end of file
diff --git a/resources/definitions/alyanx3dp.def.json b/resources/definitions/alyanx3dp.def.json
index efc97c09d1..085acc20c1 100644
--- a/resources/definitions/alyanx3dp.def.json
+++ b/resources/definitions/alyanx3dp.def.json
@@ -44,7 +44,7 @@
         },
         "machine_end_gcode":
         {
-            "default_value": ";End GCode\nM104 S0 ;extruder heater off \nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nG28 Z0\nM84 ;steppers off\nG90 ;absolute positioning\n;{profile_string}"
+            "default_value": ";End GCode\nM104 S0 ;extruder heater off \nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F{speed_travel} ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nG28 Z0\nM84 ;steppers off\nG90 ;absolute positioning\n;{profile_string}"
         }
     }
 }
\ No newline at end of file
diff --git a/resources/definitions/kupido.def.json b/resources/definitions/kupido.def.json
index 577a63581e..191e02ba34 100644
--- a/resources/definitions/kupido.def.json
+++ b/resources/definitions/kupido.def.json
@@ -43,7 +43,7 @@
         },
         "machine_end_gcode":
         {
-            "default_value": ";End GCode\nM104 S0 ;extruder heater off \nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nG28 Z0\nM84 ;steppers off\nG90 ;absolute positioning\n;{profile_string}"
+            "default_value": ";End GCode\nM104 S0 ;extruder heater off \nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F{speed_travel} ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nG28 Z0\nM84 ;steppers off\nG90 ;absolute positioning\n;{profile_string}"
         }
     }
 }
\ No newline at end of file
diff --git a/resources/qml/Widgets/RadioButton.qml b/resources/qml/Widgets/RadioButton.qml
index eaa18c44cb..b101b3739b 100644
--- a/resources/qml/Widgets/RadioButton.qml
+++ b/resources/qml/Widgets/RadioButton.qml
@@ -27,6 +27,7 @@ RadioButton
         implicitWidth: UM.Theme.getSize("radio_button").width
         implicitHeight: UM.Theme.getSize("radio_button").height
         anchors.verticalCenter: parent.verticalCenter
+        anchors.alignWhenCentered: false
         radius: width / 2
         border.width: UM.Theme.getSize("default_lining").width
         border.color: radioButton.hovered ? UM.Theme.getColor("small_button_text") : UM.Theme.getColor("small_button_text_hover")