removed redudant fields

resources/definitions/anycubic_kobra3v2.def.json

@@ -23,12 +23,21 @@
         },	
 	"machine_buildplate_type": { "default_value": "PEI Spring Steel" },
 	"machine_heated_bed": { "default_value": true},
+	
 	"material_bed_temperature":
-	{
+	{	    "maximum_value": "110",
-	    "default_value": 60,
-	    "maximum_value": "110",
 	    "maximum_value_warning": "90"	    
 	},	
+        "default_material_print_temperature":
+	{
+	    "maximum_value": 300,
+	    "default_value": 210
+	},
+        "material_print_temperature":
+	{
+	    "maximum_value": 300,
+	    "default_value": 210
+	},
         "material_print_temp_wait": { "value": true },
 	"machine_center_is_zero": { "default_value": false },
 	"layer_height": { "default_value": 0.2 },
@@ -45,7 +54,6 @@
             "maximum_value_warning": 295,
             "value": "material_print_temperature + 5"
         },
-	"material_print_temp_prep": { "default_value": false },
 	"machine_start_gcode_first": { "default_value": true },
 	"machine_start_gcode": { "default_value": "; external perimeters extrusion width = 0.42mm\n; perimeters extrusion width = 0.45mm\n; infill extrusion width = 0.45mm\n; solid infill extrusion width = 0.45mm\n; top infill extrusion width = 0.42mm\n; support material extrusion width = 0.42mm\n; first layer extrusion width = 0.50mm\nTYPE:Custom\nG9111 bedTemp={material_bed_temperature} extruderTemp={material_print_temperature}\nM117 ;display LCD message\nM900 K0.05 ;linear advance factor, ive only seen this set to k0.05\n;START HEADER\nG21 ; set units to millimeters\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nT0 ;set or report the current extruder or other tool\nM107 ; turn fan off" }
     }

resources/definitions/anycubic_kobra3v2_ACE_PRO.def.json

@@ -31,7 +31,6 @@
 	"machine_heated_bed": { "default_value": true},
 	"material_bed_temperature":
 	{
-	    "default_value": 60,
 	    "maximum_value": "110",
 	    "maximum_value_warning": "90"	    
 	},	
@@ -48,12 +47,12 @@
         "default_material_print_temperature":
 	{
 	    "maximum_value": 300,
-	    "default_value": 200
+	    "default_value": 210
 	},
         "material_print_temperature":
 	{
 	    "maximum_value": 300,
-	    "default_value": 200
+	    "default_value": 210
 	},
 	"material_standby_temperature" : {"default_value": "material_print_temperature"},
         "material_print_temperature_layer_0":
@@ -61,7 +60,6 @@
             "maximum_value_warning": 295,
             "value": "material_print_temperature + 5"
         },
-	"material_print_temp_prep": { "default_value": false },
 	"machine_start_gcode_first": { "default_value": true },
 	"machine_start_gcode": { "default_value": "; external perimeters extrusion width = 0.42mm\n; perimeters extrusion width = 0.45mm\n; infill extrusion width = 0.45mm\n; solid infill extrusion width = 0.45mm\n; top infill extrusion width = 0.42mm\n; support material extrusion width = 0.42mm\n; first layer extrusion width = 0.50mm\nTYPE:Custom\nG9111 bedTemp={material_bed_temperature} extruderTemp={material_print_temperature}\nM117 ;display LCD message\nM900 K0.05 ;linear advance factor, ive only seen this set to k0.05\n;START HEADER\nG21 ; set units to millimeters\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nT0 ;set or report the current extruder or other tool\nM107 ; turn fan off" },
 	"machine_end_gcode": { "default_value": "M104 S0\nM140 S0\n;Retract the filament\nG92 E1\nG1 E-1 F300\nG27 P2 ;Park toolhead\nM84" }	

resources/extruders/anycubic_kobra3v2_ACEPRO_extruder_2.def.json

@@ -5,7 +5,7 @@
     "metadata":
     {
         "machine": "anycubic_kobra3v2_ACE_PRO",
-        "position": "1"
+        "position": "2"
     },
     "overrides":
     {