raft middle line width has new default

The raft middle line width is the average between the top and the base of the raft. This reduces flow jumps significantly. PP-243
2025-08-05 21:13:58 -06:00 · 2022-09-13 10:27:05 +02:00 · 2022-09-13 10:27:05 +02:00 · 96569edcf0
commit 96569edcf0
parent 257d37eb73
67 changed files with 3 additions and 66 deletions
--- a/resources/definitions/ultimaker.def.json
+++ b/resources/definitions/ultimaker.def.json
@ -239,6 +239,9 @@
        "gradual_support_infill_step_height": {
            "value": "4*layer_height"
        },
+        "raft_interface_line_width": {
+            "value": "(raft_base_line_width + raft_surface_line_width) / 2"
+        },
        "raft_interface_thickness": {
            "value": "(raft_base_thickness + raft_surface_thickness) / 2"
        },
--- a/resources/definitions/ultimaker3.def.json
+++ b/resources/definitions/ultimaker3.def.json
@ -114,7 +114,6 @@
        "raft_airgap": { "value": "0" },
        "raft_base_thickness": { "value": "0.3" },
        "raft_interface_line_spacing": { "value": "0.5" },
-        "raft_interface_line_width": { "value": "0.5" },
        "retraction_amount": { "value": "6.5" },
        "retraction_hop": { "value": "2" },
        "retraction_hop_enabled": { "value": "extruders_enabled_count > 1"  },
--- a/resources/definitions/ultimaker_s3.def.json
+++ b/resources/definitions/ultimaker_s3.def.json
@ -104,7 +104,6 @@
        "raft_base_speed": { "value": "20" },
        "raft_base_thickness": { "value": "0.3" },
        "raft_interface_line_spacing": { "value": "0.5" },
-        "raft_interface_line_width": { "value": "0.5" },
        "raft_interface_speed": { "value": "20" },
        "raft_speed": { "value": "25" },
        "retraction_amount": { "value": "6.5" },
--- a/resources/definitions/ultimaker_s5.def.json
+++ b/resources/definitions/ultimaker_s5.def.json
@ -105,7 +105,6 @@
        "raft_base_speed": { "value": "20" },
        "raft_base_thickness": { "value": "0.3" },
        "raft_interface_line_spacing": { "value": "0.5" },
-        "raft_interface_line_width": { "value": "0.5" },
        "raft_interface_speed": { "value": "20" },
        "raft_speed": { "value": "25" },
        "retraction_amount": { "value": "6.5" },
--- a/resources/quality/ultimaker2_plus/um2p_cpep_0.4_draft.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_cpep_0.4_draft.inst.cfg
@ -24,7 +24,6 @@ raft_airgap = 0.37
 raft_base_line_spacing = 1.6
 raft_base_line_width = 0.8
 raft_interface_line_spacing = 1
-raft_interface_line_width = 0.8
 speed_layer_0 = =math.ceil(speed_print * 15 / 25)
 speed_print = 25
 speed_topbottom = =math.ceil(speed_print * 20 / 25)
--- a/resources/quality/ultimaker2_plus/um2p_cpep_0.4_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_cpep_0.4_normal.inst.cfg
@ -24,7 +24,6 @@ raft_airgap = 0.37
 raft_base_line_spacing = 1.6
 raft_base_line_width = 0.8
 raft_interface_line_spacing = 1
-raft_interface_line_width = 0.8
 speed_layer_0 = =math.ceil(speed_print * 15 / 35)
 speed_print = 35
 speed_topbottom = =math.ceil(speed_print * 20 / 35)
--- a/resources/quality/ultimaker2_plus/um2p_cpep_0.6_draft.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_cpep_0.6_draft.inst.cfg
@ -25,7 +25,6 @@ raft_airgap = 0.37
 raft_base_line_spacing = 2.4
 raft_base_line_width = 1.2
 raft_interface_line_spacing = 1.4
-raft_interface_line_width = 1.2
 speed_layer_0 = =round(speed_print * 30 / 50)
 speed_print = 25
 speed_topbottom = =math.ceil(speed_print * 20 / 25)
--- a/resources/quality/ultimaker2_plus/um2p_cpep_0.6_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_cpep_0.6_normal.inst.cfg
@ -25,7 +25,6 @@ raft_airgap = 0.37
 raft_base_line_spacing = 2.4
 raft_base_line_width = 1.2
 raft_interface_line_spacing = 1.4
-raft_interface_line_width = 1.2
 speed_layer_0 = =math.ceil(speed_print * 30 / 35)
 speed_print = 35
 speed_topbottom = =math.ceil(speed_print * 20 / 35)
--- a/resources/quality/ultimaker2_plus/um2p_cpep_0.8_draft.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_cpep_0.8_draft.inst.cfg
@ -23,7 +23,6 @@ layer_0_z_overlap = 0.22
 raft_airgap = 0.37
 raft_base_line_width = 1.6
 raft_interface_line_spacing = 1.8
-raft_interface_line_width = 1.6
 speed_layer_0 = =round(speed_print * 30 / 25)
 speed_print = 25
 speed_topbottom = =math.ceil(speed_print * 20 / 25)
--- a/resources/quality/ultimaker2_plus/um2p_cpep_0.8_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_cpep_0.8_normal.inst.cfg
@ -23,7 +23,6 @@ layer_0_z_overlap = 0.22
 raft_airgap = 0.37
 raft_base_line_width = 1.6
 raft_interface_line_spacing = 1.8
-raft_interface_line_width = 1.6
 speed_layer_0 = =round(speed_print * 30 / 30)
 speed_print = 30
 speed_topbottom = =math.ceil(speed_print * 20 / 30)
--- a/resources/quality/ultimaker2_plus/um2p_nylon_0.25_high.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_nylon_0.25_high.inst.cfg
@ -23,7 +23,6 @@ layer_0_z_overlap = 0.1
 raft_airgap = 0.15
 raft_base_line_width = 0.5
 raft_interface_line_spacing = 0.7
-raft_interface_line_width = 0.5
 retraction_hop_enabled = 0.2
 speed_layer_0 = =math.ceil(speed_print * 30 / 40)
 speed_print = 40
--- a/resources/quality/ultimaker2_plus/um2p_nylon_0.25_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_nylon_0.25_normal.inst.cfg
@ -23,7 +23,6 @@ layer_0_z_overlap = 0.1
 raft_airgap = 0.15
 raft_base_line_width = 0.5
 raft_interface_line_spacing = 0.7
-raft_interface_line_width = 0.5
 retraction_hop_enabled = 0.2
 speed_layer_0 = =math.ceil(speed_print * 30 / 40)
 speed_print = 40
--- a/resources/quality/ultimaker2_plus/um2p_nylon_0.4_fast.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_nylon_0.4_fast.inst.cfg
@ -23,7 +23,6 @@ raft_airgap = 0.57
 raft_base_line_spacing = 1.6
 raft_base_line_width = 0.8
 raft_interface_line_spacing = 1
-raft_interface_line_width = 0.8
 speed_layer_0 = =math.ceil(speed_print * 30 / 45)
 speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 20 / 45)
--- a/resources/quality/ultimaker2_plus/um2p_nylon_0.4_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_nylon_0.4_normal.inst.cfg
@ -23,7 +23,6 @@ raft_airgap = 0.57
 raft_base_line_spacing = 1.6
 raft_base_line_width = 0.8
 raft_interface_line_spacing = 1
-raft_interface_line_width = 0.8
 speed_layer_0 = =math.ceil(speed_print * 30 / 45)
 speed_print = 45
 speed_travel = 150
--- a/resources/quality/ultimaker2_plus/um2p_nylon_0.6_fast.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_nylon_0.6_fast.inst.cfg
@ -23,7 +23,6 @@ raft_airgap = 0.44
 raft_base_line_spacing = 2.4
 raft_base_line_width = 1.2
 raft_interface_line_spacing = 1.4
-raft_interface_line_width = 1.2
 retraction_hop_enabled = 0.2
 speed_layer_0 = =math.ceil(speed_print * 30 / 55)
 speed_print = 55
--- a/resources/quality/ultimaker2_plus/um2p_nylon_0.6_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_nylon_0.6_normal.inst.cfg
@ -23,7 +23,6 @@ raft_airgap = 0.44
 raft_base_line_spacing = 2.4
 raft_base_line_width = 1.2
 raft_interface_line_spacing = 1.4
-raft_interface_line_width = 1.2
 retraction_hop_enabled = 0.2
 speed_layer_0 = =math.ceil(speed_print * 30 / 55)
 speed_print = 55
--- a/resources/quality/ultimaker2_plus/um2p_nylon_0.8_draft.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_nylon_0.8_draft.inst.cfg
@ -22,7 +22,6 @@ layer_0_z_overlap = 0.25
 raft_airgap = 0.44
 raft_base_line_width = 1.6
 raft_interface_line_spacing = 1.8
-raft_interface_line_width = 1.6
 retraction_hop_enabled = 0.2
 speed_layer_0 = =math.ceil(speed_print * 30 / 55)
 speed_print = 55
--- a/resources/quality/ultimaker2_plus/um2p_nylon_0.8_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_nylon_0.8_normal.inst.cfg
@ -22,7 +22,6 @@ layer_0_z_overlap = 0.25
 raft_airgap = 0.44
 raft_base_line_width = 1.6
 raft_interface_line_spacing = 1.8
-raft_interface_line_width = 1.6
 retraction_hop_enabled = 0.2
 speed_layer_0 = =round(speed_print * 30 / 55)
 speed_print = 55
--- a/resources/quality/ultimaker2_plus/um2p_pc_0.25_high.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_pc_0.25_high.inst.cfg
@ -25,7 +25,6 @@ raft_airgap = 0.25
 raft_base_line_spacing = 1
 raft_base_line_width = 0.5
 raft_interface_line_spacing = 0.7
-raft_interface_line_width = 0.5
 speed_layer_0 = =round(speed_print * 30 / 30)
 speed_print = 30
 support_enable = True
--- a/resources/quality/ultimaker2_plus/um2p_pc_0.25_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_pc_0.25_normal.inst.cfg
@ -25,7 +25,6 @@ raft_airgap = 0.25
 raft_base_line_spacing = 1
 raft_base_line_width = 0.5
 raft_interface_line_spacing = 0.7
-raft_interface_line_width = 0.5
 speed_layer_0 = =round(speed_print * 30 / 30)
 speed_print = 30
 support_enable = True
--- a/resources/quality/ultimaker2_plus/um2p_pc_0.4_fast.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_pc_0.4_fast.inst.cfg
@ -24,7 +24,6 @@ raft_airgap = 0.35
 raft_base_line_spacing = 1.6
 raft_base_line_width = 0.8
 raft_interface_line_spacing = 1
-raft_interface_line_width = 0.8
 speed_layer_0 = =round(speed_print * 30 / 45)
 speed_print = 45
 speed_wall_0 = =math.ceil(speed_print * 20 / 45)
--- a/resources/quality/ultimaker2_plus/um2p_pc_0.4_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_pc_0.4_normal.inst.cfg
@ -24,7 +24,6 @@ raft_airgap = 0.35
 raft_base_line_spacing = 1.6
 raft_base_line_width = 0.8
 raft_interface_line_spacing = 1
-raft_interface_line_width = 0.8
 speed_layer_0 = =round(speed_print * 30 / 45)
 speed_print = 45
 speed_wall_0 = =math.ceil(speed_print * 20 / 45)
--- a/resources/quality/ultimaker2_plus/um2p_pc_0.6_fast.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_pc_0.6_fast.inst.cfg
@ -24,7 +24,6 @@ raft_airgap = 0.52
 raft_base_line_spacing = 2.4
 raft_base_line_width = 1.2
 raft_interface_line_spacing = 1.4
-raft_interface_line_width = 1.2
 speed_layer_0 = =math.ceil(speed_print * 30 / 45)
 speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 20 / 45)
--- a/resources/quality/ultimaker2_plus/um2p_pc_0.6_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_pc_0.6_normal.inst.cfg
@ -24,7 +24,6 @@ raft_airgap = 0.52
 raft_base_line_spacing = 2.4
 raft_base_line_width = 1.2
 raft_interface_line_spacing = 1.4
-raft_interface_line_width = 1.2
 speed_layer_0 = =math.ceil(speed_print * 30 / 45)
 speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 20 / 45)
--- a/resources/quality/ultimaker2_plus/um2p_pc_0.8_draft.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_pc_0.8_draft.inst.cfg
@ -23,7 +23,6 @@ layer_0_z_overlap = 0.22
 raft_airgap = 0.47
 raft_base_line_width = 1.6
 raft_interface_line_spacing = 1.8
-raft_interface_line_width = 1.6
 speed_layer_0 = =round(speed_print * 30 / 40)
 speed_print = 40
 support_angle = 45
--- a/resources/quality/ultimaker2_plus/um2p_pc_0.8_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_pc_0.8_normal.inst.cfg
@ -23,7 +23,6 @@ layer_0_z_overlap = 0.22
 raft_airgap = 0.47
 raft_base_line_width = 1.6
 raft_interface_line_spacing = 1.8
-raft_interface_line_width = 1.6
 speed_layer_0 = =round(speed_print * 30 / 40)
 speed_print = 40
 support_angle = 45
--- a/resources/quality/ultimaker2_plus/um2p_tpu_0.25_high.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_tpu_0.25_high.inst.cfg
@ -23,7 +23,6 @@ layer_0_z_overlap = 0.1
 raft_airgap = 0.2
 raft_base_line_spacing = 1
 raft_interface_line_spacing = 1
-raft_interface_line_width = 0.2
 retraction_count_max = 15
 retraction_hop_enabled = 0.2
 speed_layer_0 = =math.ceil(speed_print * 30 / 40)
--- a/resources/quality/ultimaker2_plus/um2p_tpu_0.6_fast.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_tpu_0.6_fast.inst.cfg
@ -23,7 +23,6 @@ raft_airgap = 0.24
 raft_base_line_spacing = 1.2
 raft_base_line_width = 0.6
 raft_interface_line_spacing = 1.2
-raft_interface_line_width = 0.57
 retraction_count_max = 15
 retraction_hop_enabled = 0.2
 speed_layer_0 = =math.ceil(speed_print * 30 / 45)
--- a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_draft.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_draft.inst.cfg
@ -23,7 +23,6 @@ raft_airgap = 0.37
 raft_base_line_spacing = 1.6
 raft_base_line_width = 0.8
 raft_interface_line_spacing = 1
-raft_interface_line_width = 0.8
 retraction_combing_max_distance = 50
 retraction_prime_speed = =retraction_speed
 speed_layer_0 = =math.ceil(speed_print * 15 / 25)
--- a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_normal.inst.cfg
@ -23,7 +23,6 @@ raft_airgap = 0.37
 raft_base_line_spacing = 1.6
 raft_base_line_width = 0.8
 raft_interface_line_spacing = 1
-raft_interface_line_width = 0.8
 retraction_combing_max_distance = 50
 retraction_prime_speed = =retraction_speed
 speed_layer_0 = =math.ceil(speed_print * 15 / 35)
--- a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_draft.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_draft.inst.cfg
@ -23,7 +23,6 @@ raft_airgap = 0.37
 raft_base_line_spacing = 2.4
 raft_base_line_width = 1.2
 raft_interface_line_spacing = 1.4
-raft_interface_line_width = 1.2
 retraction_combing_max_distance = 50
 retraction_prime_speed = =retraction_speed
 speed_layer_0 = =round(speed_print * 30 / 50)
--- a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_normal.inst.cfg
@ -23,7 +23,6 @@ raft_airgap = 0.37
 raft_base_line_spacing = 2.4
 raft_base_line_width = 1.2
 raft_interface_line_spacing = 1.4
-raft_interface_line_width = 1.2
 retraction_combing_max_distance = 50
 retraction_prime_speed = =retraction_speed
 speed_layer_0 = =math.ceil(speed_print * 30 / 35)
--- a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.8_draft.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.8_draft.inst.cfg
@ -22,7 +22,6 @@ layer_0_z_overlap = 0.22
 raft_airgap = 0.37
 raft_base_line_width = 1.6
 raft_interface_line_spacing = 1.8
-raft_interface_line_width = 1.6
 speed_layer_0 = =round(speed_print * 30 / 25)
 speed_print = 25
 speed_topbottom = =math.ceil(speed_print * 20 / 25)
--- a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.8_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.8_normal.inst.cfg
@ -22,7 +22,6 @@ layer_0_z_overlap = 0.22
 raft_airgap = 0.37
 raft_base_line_width = 1.6
 raft_interface_line_spacing = 1.8
-raft_interface_line_width = 1.6
 speed_layer_0 = =round(speed_print * 30 / 30)
 speed_print = 30
 speed_topbottom = =math.ceil(speed_print * 20 / 30)
--- a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.25_high.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.25_high.inst.cfg
@ -22,7 +22,6 @@ layer_0_z_overlap = 0.1
 raft_airgap = 0.15
 raft_base_line_width = 0.5
 raft_interface_line_spacing = 0.7
-raft_interface_line_width = 0.5
 retraction_hop_enabled = 0.2
 speed_layer_0 = =math.ceil(speed_print * 30 / 40)
 speed_print = 40
--- a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.25_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.25_normal.inst.cfg
@ -22,7 +22,6 @@ layer_0_z_overlap = 0.1
 raft_airgap = 0.15
 raft_base_line_width = 0.5
 raft_interface_line_spacing = 0.7
-raft_interface_line_width = 0.5
 retraction_hop_enabled = 0.2
 speed_layer_0 = =math.ceil(speed_print * 30 / 40)
 speed_print = 40
--- a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.4_fast.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.4_fast.inst.cfg
@ -22,7 +22,6 @@ raft_airgap = 0.57
 raft_base_line_spacing = 1.6
 raft_base_line_width = 0.8
 raft_interface_line_spacing = 1
-raft_interface_line_width = 0.8
 retraction_prime_speed = =retraction_speed
 speed_layer_0 = =math.ceil(speed_print * 30 / 45)
 speed_print = 45
--- a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.4_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.4_normal.inst.cfg
@ -22,7 +22,6 @@ raft_airgap = 0.57
 raft_base_line_spacing = 1.6
 raft_base_line_width = 0.8
 raft_interface_line_spacing = 1
-raft_interface_line_width = 0.8
 retraction_prime_speed = =retraction_speed
 speed_layer_0 = =math.ceil(speed_print * 30 / 45)
 speed_print = 45
--- a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.6_fast.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.6_fast.inst.cfg
@ -22,7 +22,6 @@ raft_airgap = 0.44
 raft_base_line_spacing = 2.4
 raft_base_line_width = 1.2
 raft_interface_line_spacing = 1.4
-raft_interface_line_width = 1.2
 retraction_hop_enabled = 0.2
 retraction_prime_speed = =retraction_speed
 speed_layer_0 = =math.ceil(speed_print * 30 / 55)
--- a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.6_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.6_normal.inst.cfg
@ -22,7 +22,6 @@ raft_airgap = 0.44
 raft_base_line_spacing = 2.4
 raft_base_line_width = 1.2
 raft_interface_line_spacing = 1.4
-raft_interface_line_width = 1.2
 retraction_hop_enabled = 0.2
 retraction_prime_speed = =retraction_speed
 speed_layer_0 = =math.ceil(speed_print * 30 / 55)
--- a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.8_draft.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.8_draft.inst.cfg
@ -21,7 +21,6 @@ layer_0_z_overlap = 0.25
 raft_airgap = 0.44
 raft_base_line_width = 1.6
 raft_interface_line_spacing = 1.8
-raft_interface_line_width = 1.6
 retraction_hop_enabled = 0.2
 speed_layer_0 = =math.ceil(speed_print * 30 / 55)
 speed_print = 55
--- a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.8_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.8_normal.inst.cfg
@ -21,7 +21,6 @@ layer_0_z_overlap = 0.25
 raft_airgap = 0.44
 raft_base_line_width = 1.6
 raft_interface_line_spacing = 1.8
-raft_interface_line_width = 1.6
 retraction_hop_enabled = 0.2
 speed_layer_0 = =round(speed_print * 30 / 55)
 speed_print = 55
--- a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.25_high.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.25_high.inst.cfg
@ -24,7 +24,6 @@ raft_airgap = 0.25
 raft_base_line_spacing = 1
 raft_base_line_width = 0.5
 raft_interface_line_spacing = 0.7
-raft_interface_line_width = 0.5
 speed_layer_0 = =round(speed_print * 30 / 30)
 speed_print = 30
 support_enable = True
--- a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.25_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.25_normal.inst.cfg
@ -24,7 +24,6 @@ raft_airgap = 0.25
 raft_base_line_spacing = 1
 raft_base_line_width = 0.5
 raft_interface_line_spacing = 0.7
-raft_interface_line_width = 0.5
 speed_layer_0 = =round(speed_print * 30 / 30)
 speed_print = 30
 support_enable = True
--- a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.4_fast.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.4_fast.inst.cfg
@ -23,7 +23,6 @@ raft_airgap = 0.35
 raft_base_line_spacing = 1.6
 raft_base_line_width = 0.8
 raft_interface_line_spacing = 1
-raft_interface_line_width = 0.8
 speed_layer_0 = =round(speed_print * 30 / 45)
 speed_print = 45
 speed_wall_0 = =math.ceil(speed_print * 20 / 45)
--- a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.4_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.4_normal.inst.cfg
@ -23,7 +23,6 @@ raft_airgap = 0.35
 raft_base_line_spacing = 1.6
 raft_base_line_width = 0.8
 raft_interface_line_spacing = 1
-raft_interface_line_width = 0.8
 speed_layer_0 = =round(speed_print * 30 / 45)
 speed_print = 45
 speed_wall_0 = =math.ceil(speed_print * 20 / 45)
--- a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.6_fast.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.6_fast.inst.cfg
@ -23,7 +23,6 @@ raft_airgap = 0.52
 raft_base_line_spacing = 2.4
 raft_base_line_width = 1.2
 raft_interface_line_spacing = 1.4
-raft_interface_line_width = 1.2
 speed_layer_0 = =math.ceil(speed_print * 30 / 45)
 speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 20 / 45)
--- a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.6_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.6_normal.inst.cfg
@ -23,7 +23,6 @@ raft_airgap = 0.52
 raft_base_line_spacing = 2.4
 raft_base_line_width = 1.2
 raft_interface_line_spacing = 1.4
-raft_interface_line_width = 1.2
 speed_layer_0 = =math.ceil(speed_print * 30 / 45)
 speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 20 / 45)
--- a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.8_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.8_normal.inst.cfg
@ -22,7 +22,6 @@ layer_0_z_overlap = 0.22
 raft_airgap = 0.47
 raft_base_line_width = 1.6
 raft_interface_line_spacing = 1.8
-raft_interface_line_width = 1.6
 speed_layer_0 = =round(speed_print * 30 / 40)
 speed_print = 40
 support_angle = 45
--- a/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.25_high.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.25_high.inst.cfg
@ -23,7 +23,6 @@ layer_0_z_overlap = 0.1
 raft_airgap = 0.2
 raft_base_line_spacing = 1
 raft_interface_line_spacing = 1
-raft_interface_line_width = 0.2
 retraction_count_max = 15
 retraction_hop_enabled = 0.2
 speed_layer_0 = =math.ceil(speed_print * 30 / 40)
--- a/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.6_fast.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.6_fast.inst.cfg
@ -23,7 +23,6 @@ raft_airgap = 0.24
 raft_base_line_spacing = 1.2
 raft_base_line_width = 0.6
 raft_interface_line_spacing = 1.2
-raft_interface_line_width = 0.57
 retraction_count_max = 15
 retraction_hop_enabled = 0.2
 speed_layer_0 = =math.ceil(speed_print * 30 / 45)
--- a/resources/variants/ultimaker3_aa0.25.inst.cfg
+++ b/resources/variants/ultimaker3_aa0.25.inst.cfg
@ -21,7 +21,6 @@ material_initial_print_temperature = =material_print_temperature - 5
 raft_airgap = 0.3
 raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
 raft_interface_line_spacing = =raft_interface_line_width + 0.2
-raft_interface_line_width = =line_width * 2
 retraction_min_travel = 0.7
 retraction_prime_speed = =retraction_speed
 skin_overlap = 15
--- a/resources/variants/ultimaker3_aa04.inst.cfg
+++ b/resources/variants/ultimaker3_aa04.inst.cfg
@ -17,7 +17,6 @@ raft_acceleration = =acceleration_print
 raft_airgap = 0.3
 raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
 raft_interface_line_spacing = =raft_interface_line_width + 0.2
-raft_interface_line_width = =line_width * 2
 retraction_amount = 6.5
 retraction_min_travel = =line_width * 2
 retraction_prime_speed = =retraction_speed
--- a/resources/variants/ultimaker3_bb0.8.inst.cfg
+++ b/resources/variants/ultimaker3_bb0.8.inst.cfg
@ -36,7 +36,6 @@ raft_airgap = 0
 raft_base_speed = 20
 raft_base_thickness = 0.3
 raft_interface_line_spacing = 0.5
-raft_interface_line_width = 0.5
 raft_interface_speed = 20
 raft_speed = 25
 raft_surface_layers = 1
--- a/resources/variants/ultimaker3_extended_aa0.25.inst.cfg
+++ b/resources/variants/ultimaker3_extended_aa0.25.inst.cfg
@ -21,7 +21,6 @@ material_initial_print_temperature = =material_print_temperature - 5
 raft_airgap = 0.3
 raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
 raft_interface_line_spacing = =raft_interface_line_width + 0.2
-raft_interface_line_width = =line_width * 2
 retraction_min_travel = 0.7
 retraction_prime_speed = =retraction_speed
 skin_overlap = 15
--- a/resources/variants/ultimaker3_extended_aa04.inst.cfg
+++ b/resources/variants/ultimaker3_extended_aa04.inst.cfg
@ -17,7 +17,6 @@ raft_acceleration = =acceleration_print
 raft_airgap = 0.3
 raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
 raft_interface_line_spacing = =raft_interface_line_width + 0.2
-raft_interface_line_width = =line_width * 2
 retraction_amount = 6.5
 retraction_min_travel = =line_width * 2
 retraction_prime_speed = =retraction_speed
--- a/resources/variants/ultimaker3_extended_bb0.8.inst.cfg
+++ b/resources/variants/ultimaker3_extended_bb0.8.inst.cfg
@ -36,7 +36,6 @@ raft_airgap = 0
 raft_base_speed = 20
 raft_base_thickness = 0.3
 raft_interface_line_spacing = 0.5
-raft_interface_line_width = 0.5
 raft_interface_speed = 20
 raft_speed = 25
 raft_surface_layers = 1
--- a/resources/variants/ultimaker_s3_aa0.25.inst.cfg
+++ b/resources/variants/ultimaker_s3_aa0.25.inst.cfg
@ -21,7 +21,6 @@ material_initial_print_temperature = =material_print_temperature - 5
 raft_airgap = 0.3
 raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
 raft_interface_line_spacing = =raft_interface_line_width + 0.2
-raft_interface_line_width = =line_width * 2
 retraction_min_travel = 0.7
 retraction_prime_speed = =retraction_speed
 skin_overlap = 15
--- a/resources/variants/ultimaker_s3_aa04.inst.cfg
+++ b/resources/variants/ultimaker_s3_aa04.inst.cfg
@ -17,7 +17,6 @@ raft_acceleration = =acceleration_print
 raft_airgap = 0.3
 raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
 raft_interface_line_spacing = =raft_interface_line_width + 0.2
-raft_interface_line_width = =line_width * 2
 retraction_amount = 6.5
 retraction_min_travel = =line_width * 2
 skin_overlap = 15
--- a/resources/variants/ultimaker_s3_bb0.8.inst.cfg
+++ b/resources/variants/ultimaker_s3_bb0.8.inst.cfg
@ -35,7 +35,6 @@ raft_airgap = 0
 raft_base_speed = 20
 raft_base_thickness = 0.3
 raft_interface_line_spacing = 0.5
-raft_interface_line_width = 0.5
 raft_interface_speed = 20
 raft_speed = 25
 raft_surface_layers = 1
--- a/resources/variants/ultimaker_s3_cc04.inst.cfg
+++ b/resources/variants/ultimaker_s3_cc04.inst.cfg
@ -17,7 +17,6 @@ raft_acceleration = =acceleration_print
 raft_airgap = 0.3
 raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
 raft_interface_line_spacing = =raft_interface_line_width + 0.2
-raft_interface_line_width = =line_width * 2
 retraction_min_travel = =line_width * 2
 retraction_prime_speed = =retraction_speed
 speed_infill = =speed_print
--- a/resources/variants/ultimaker_s3_cc06.inst.cfg
+++ b/resources/variants/ultimaker_s3_cc06.inst.cfg
@ -17,7 +17,6 @@ raft_acceleration = =acceleration_print
 raft_airgap = 0.3
 raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
 raft_interface_line_spacing = =raft_interface_line_width + 0.2
-raft_interface_line_width = =line_width * 2
 retraction_min_travel = =line_width * 2
 retraction_prime_speed = =retraction_speed
 speed_infill = =speed_print
--- a/resources/variants/ultimaker_s5_aa0.25.inst.cfg
+++ b/resources/variants/ultimaker_s5_aa0.25.inst.cfg
@ -21,7 +21,6 @@ material_initial_print_temperature = =material_print_temperature - 5
 raft_airgap = 0.3
 raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
 raft_interface_line_spacing = =raft_interface_line_width + 0.2
-raft_interface_line_width = =line_width * 2
 retraction_min_travel = 0.7
 retraction_prime_speed = =retraction_speed
 skin_overlap = 15
--- a/resources/variants/ultimaker_s5_aa04.inst.cfg
+++ b/resources/variants/ultimaker_s5_aa04.inst.cfg
@ -17,7 +17,6 @@ raft_acceleration = =acceleration_print
 raft_airgap = 0.3
 raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
 raft_interface_line_spacing = =raft_interface_line_width + 0.2
-raft_interface_line_width = =line_width * 2
 retraction_amount = 6.5
 retraction_min_travel = =line_width * 2
 skin_overlap = 15
--- a/resources/variants/ultimaker_s5_bb0.8.inst.cfg
+++ b/resources/variants/ultimaker_s5_bb0.8.inst.cfg
@ -35,7 +35,6 @@ raft_airgap = 0
 raft_base_speed = 20
 raft_base_thickness = 0.3
 raft_interface_line_spacing = 0.5
-raft_interface_line_width = 0.5
 raft_interface_speed = 20
 raft_speed = 25
 raft_surface_layers = 1
--- a/resources/variants/ultimaker_s5_cc04.inst.cfg
+++ b/resources/variants/ultimaker_s5_cc04.inst.cfg
@ -17,7 +17,6 @@ raft_acceleration = =acceleration_print
 raft_airgap = 0.3
 raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
 raft_interface_line_spacing = =raft_interface_line_width + 0.2
-raft_interface_line_width = =line_width * 2
 retraction_min_travel = =line_width * 2
 retraction_prime_speed = =retraction_speed
 speed_infill = =speed_print
--- a/resources/variants/ultimaker_s5_cc06.inst.cfg
+++ b/resources/variants/ultimaker_s5_cc06.inst.cfg
@ -17,7 +17,6 @@ raft_acceleration = =acceleration_print
 raft_airgap = 0.3
 raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
 raft_interface_line_spacing = =raft_interface_line_width + 0.2
-raft_interface_line_width = =line_width * 2
 retraction_min_travel = =line_width * 2
 retraction_prime_speed = =retraction_speed
 speed_infill = =speed_print