mirror of
https://github.com/Ultimaker/Cura.git
synced 2025-07-21 21:58:01 -06:00
Merge remote-tracking branch 'upstream/master' into mb-anchor-skin-in-infill
This commit is contained in:
Mark Burton
commit
9555a64ab1
141 changed files with 54969 additions and 1262 deletions
84
resources/definitions/abax_pri3.def.json
Normal file
84
resources/definitions/abax_pri3.def.json
Normal file
|
|
@ -0,0 +1,84 @@
|
|||
{
|
||||
"id": "PRi3",
|
||||
"name": "ABAX PRi3",
|
||||
"version": 2,
|
||||
"inherits": "fdmprinter",
|
||||
"metadata": {
|
||||
"visible": true,
|
||||
"author": "ABAX 3d Technologies",
|
||||
"manufacturer": "ABAX 3d Technologies",
|
||||
"category": "Other",
|
||||
"file_formats": "text/x-gcode"
|
||||
},
|
||||
"overrides": {
|
||||
"machine_start_gcode": {
|
||||
"default_value": "; -- START GCODE --\nG21 ;set units to millimetres\nG90 ;set to absolute positioning\nM106 S0 ;set fan speed to zero (turned off)\nG28 X0 Y0 ;move to the X/Y origin (Home)\nG28 Z0 ;move to the Z origin (Home)\nG1 Z5.0 F200 ;move Z to position 5.0 mm\nG92 E0 ;zero the extruded length\n; -- end of START GCODE --"
|
||||
},
|
||||
"machine_end_gcode": {
|
||||
"default_value": "; -- END GCODE --\nM104 S0 ;set extruder temperature to zero (turned off)\nM140 S0 ;set temp of bed to Zero \nG91 ;set to relative positioning\nG1 E-10 F300 ;retract the filament a bit to release some of the pressure\nG1 F2000 X0 Y215 ;move X to min and Y to max \nG90 ;set to absolute positioning\nM84 ;turn off steppers\n; -- end of END GCODE --"
|
||||
},
|
||||
"machine_width": {
|
||||
"default_value": 225
|
||||
},
|
||||
"machine_depth": {
|
||||
"default_value": 220
|
||||
},
|
||||
"machine_height": {
|
||||
"default_value": 200
|
||||
},
|
||||
"machine_heated_bed": {
|
||||
"default_value": false
|
||||
},
|
||||
"machine_center_is_zero": {
|
||||
"default_value": false
|
||||
},
|
||||
"machine_gcode_flavor": {
|
||||
"default_value": "RepRap"
|
||||
},
|
||||
"layer_height": {
|
||||
"default_value": 0.2
|
||||
},
|
||||
"layer_height_0": {
|
||||
"default_value": 0.2
|
||||
},
|
||||
"wall_thickness": {
|
||||
"default_value": 1
|
||||
},
|
||||
"top_bottom_thickness": {
|
||||
"default_value": 1
|
||||
},
|
||||
"bottom_thickness": {
|
||||
"default_value": 1
|
||||
},
|
||||
"material_print_temperature": {
|
||||
"default_value": 200
|
||||
},
|
||||
"material_bed_temperature": {
|
||||
"default_value": 0
|
||||
},
|
||||
"material_diameter": {
|
||||
"default_value": 1.75
|
||||
},
|
||||
"speed_print": {
|
||||
"default_value": 40
|
||||
},
|
||||
"speed_infill": {
|
||||
"default_value": 70
|
||||
},
|
||||
"speed_wall": {
|
||||
"default_value": 25
|
||||
},
|
||||
"speed_topbottom": {
|
||||
"default_value": 15
|
||||
},
|
||||
"speed_travel": {
|
||||
"default_value": 150
|
||||
},
|
||||
"speed_layer_0": {
|
||||
"default_value": 30
|
||||
},
|
||||
"support_enable": {
|
||||
"default_value": true
|
||||
}
|
||||
}
|
||||
}
|
||||
84
resources/definitions/abax_pri5.def.json
Normal file
84
resources/definitions/abax_pri5.def.json
Normal file
|
|
@ -0,0 +1,84 @@
|
|||
{
|
||||
"id": "PRi5",
|
||||
"name": "ABAX PRi5",
|
||||
"version": 2,
|
||||
"inherits": "fdmprinter",
|
||||
"metadata": {
|
||||
"visible": true,
|
||||
"author": "ABAX 3d Technologies",
|
||||
"manufacturer": "ABAX 3d Technologies",
|
||||
"category": "Other",
|
||||
"file_formats": "text/x-gcode"
|
||||
},
|
||||
"overrides": {
|
||||
"machine_start_gcode": {
|
||||
"default_value": "; -- START GCODE --\nG21 ;set units to millimetres\nG90 ;set to absolute positioning\nM106 S0 ;set fan speed to zero (turned off)\nG28 X0 Y0 ;move to the X/Y origin (Home)\nG28 Z0 ;move to the Z origin (Home)\nG1 Z5.0 F200 ;move Z to position 5.0 mm\nG92 E0 ;zero the extruded length\n; -- end of START GCODE --"
|
||||
},
|
||||
"machine_end_gcode": {
|
||||
"default_value": "; -- END GCODE --\nM104 S0 ;set extruder temperature to zero (turned off)\nM140 S0 ;set temp of bed to Zero \nG91 ;set to relative positioning\nG1 E-10 F300 ;retract the filament a bit to release some of the pressure\nG1 F2000 X0 Y300 ;move X to min and Y to max \nG90 ;set to absolute positioning\nM84 ;turn off steppers\n; -- end of END GCODE --"
|
||||
},
|
||||
"machine_width": {
|
||||
"default_value": 310
|
||||
},
|
||||
"machine_depth": {
|
||||
"default_value": 310
|
||||
},
|
||||
"machine_height": {
|
||||
"default_value": 300
|
||||
},
|
||||
"machine_heated_bed": {
|
||||
"default_value": false
|
||||
},
|
||||
"machine_center_is_zero": {
|
||||
"default_value": false
|
||||
},
|
||||
"machine_gcode_flavor": {
|
||||
"default_value": "RepRap"
|
||||
},
|
||||
"layer_height": {
|
||||
"default_value": 0.2
|
||||
},
|
||||
"layer_height_0": {
|
||||
"default_value": 0.2
|
||||
},
|
||||
"wall_thickness": {
|
||||
"default_value": 1
|
||||
},
|
||||
"top_bottom_thickness": {
|
||||
"default_value": 1
|
||||
},
|
||||
"bottom_thickness": {
|
||||
"default_value": 1
|
||||
},
|
||||
"material_print_temperature": {
|
||||
"default_value": 200
|
||||
},
|
||||
"material_bed_temperature": {
|
||||
"default_value": 0
|
||||
},
|
||||
"material_diameter": {
|
||||
"default_value": 1.75
|
||||
},
|
||||
"speed_print": {
|
||||
"default_value": 40
|
||||
},
|
||||
"speed_infill": {
|
||||
"default_value": 70
|
||||
},
|
||||
"speed_wall": {
|
||||
"default_value": 25
|
||||
},
|
||||
"speed_topbottom": {
|
||||
"default_value": 15
|
||||
},
|
||||
"speed_travel": {
|
||||
"default_value": 150
|
||||
},
|
||||
"speed_layer_0": {
|
||||
"default_value": 30
|
||||
},
|
||||
"support_enable": {
|
||||
"default_value": true
|
||||
}
|
||||
}
|
||||
}
|
||||
84
resources/definitions/abax_titan.def.json
Normal file
84
resources/definitions/abax_titan.def.json
Normal file
|
|
@ -0,0 +1,84 @@
|
|||
{
|
||||
"id": "Titan",
|
||||
"name": "ABAX Titan",
|
||||
"version": 2,
|
||||
"inherits": "fdmprinter",
|
||||
"metadata": {
|
||||
"visible": true,
|
||||
"author": "ABAX 3d Technologies",
|
||||
"manufacturer": "ABAX 3d Technologies",
|
||||
"category": "Other",
|
||||
"file_formats": "text/x-gcode"
|
||||
},
|
||||
"overrides": {
|
||||
"machine_start_gcode": {
|
||||
"default_value": "; -- START GCODE --\nG21 ;set units to millimetres\nG90 ;set to absolute positioning\nM106 S0 ;set fan speed to zero (turned off)\nG28 X0 Y0 ;move to the X/Y origin (Home)\nG28 Z0 ;move to the Z origin (Home)\nG1 Z5.0 F200 ;move Z to position 5.0 mm\nG92 E0 ;zero the extruded length\n; -- end of START GCODE --"
|
||||
},
|
||||
"machine_end_gcode": {
|
||||
"default_value": "; -- END GCODE --\nM104 S0 ;set extruder temperature to zero (turned off)\nM140 S0 ;set temp of bed to Zero \nG91 ;set to relative positioning\nG1 E-10 F300 ;retract the filament a bit to release some of the pressure\nG1 F2000 X0 Y300 ;move X to min and Y to max \nG90 ;set to absolute positioning\nM84 ;turn off steppers\n; -- end of END GCODE --"
|
||||
},
|
||||
"machine_width": {
|
||||
"default_value": 310
|
||||
},
|
||||
"machine_depth": {
|
||||
"default_value": 310
|
||||
},
|
||||
"machine_height": {
|
||||
"default_value": 300
|
||||
},
|
||||
"machine_heated_bed": {
|
||||
"default_value": false
|
||||
},
|
||||
"machine_center_is_zero": {
|
||||
"default_value": false
|
||||
},
|
||||
"machine_gcode_flavor": {
|
||||
"default_value": "RepRap"
|
||||
},
|
||||
"layer_height": {
|
||||
"default_value": 0.2
|
||||
},
|
||||
"layer_height_0": {
|
||||
"default_value": 0.2
|
||||
},
|
||||
"wall_thickness": {
|
||||
"default_value": 1
|
||||
},
|
||||
"top_bottom_thickness": {
|
||||
"default_value": 1
|
||||
},
|
||||
"bottom_thickness": {
|
||||
"default_value": 1
|
||||
},
|
||||
"material_print_temperature": {
|
||||
"default_value": 200
|
||||
},
|
||||
"material_bed_temperature": {
|
||||
"default_value": 0
|
||||
},
|
||||
"material_diameter": {
|
||||
"default_value": 1.75
|
||||
},
|
||||
"speed_print": {
|
||||
"default_value": 40
|
||||
},
|
||||
"speed_infill": {
|
||||
"default_value": 70
|
||||
},
|
||||
"speed_wall": {
|
||||
"default_value": 25
|
||||
},
|
||||
"speed_topbottom": {
|
||||
"default_value": 15
|
||||
},
|
||||
"speed_travel": {
|
||||
"default_value": 150
|
||||
},
|
||||
"speed_layer_0": {
|
||||
"default_value": 30
|
||||
},
|
||||
"support_enable": {
|
||||
"default_value": true
|
||||
}
|
||||
}
|
||||
}
|
||||
|
|
@ -9,7 +9,6 @@
|
|||
"manufacturer": "Cartesio bv",
|
||||
"category": "Other",
|
||||
"file_formats": "text/x-gcode",
|
||||
"has_materials": true,
|
||||
"has_machine_materials": true,
|
||||
"has_variants": true,
|
||||
"variants_name": "Nozzle size",
|
||||
|
|
@ -31,12 +30,11 @@
|
|||
"machine_heated_bed": { "default_value": true },
|
||||
"machine_center_is_zero": { "default_value": false },
|
||||
"machine_height": { "default_value": 400 },
|
||||
"machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
|
||||
"machine_depth": { "default_value": 270 },
|
||||
"machine_width": { "default_value": 430 },
|
||||
"machine_name": { "default_value": "Cartesio" },
|
||||
"machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
|
||||
"machine_start_gcode": {
|
||||
"default_value": "M92 E162\nG21\nG90\nM42 S255 P13;chamber lights\nM42 S255 P12;fume extraction\nM140 S{material_bed_temperature}\n\nM117 Homing Y ......\nG28 Y\nM117 Homing X ......\nG28 X\nM117 Homing Z ......\nG28 Z F100\nG1 Z10 F600\nG1 X70 Y20 F9000;go to wipe point\n\nM190 S{material_bed_temperature}\nM104 S120 T1\nM109 S{material_print_temperature} T0\nM104 S21 T1\n\nM117 purging nozzle....\n\nT0\nG92 E0;set E\nG1 E10 F100\nG92 E0\nG1 E-{retraction_amount} F600\nG92 E0\n\nM117 wiping nozzle....\n\nG1 X1 Y24 F3000\nG1 X70 F9000\n\nM117 Printing .....\n\nG1 E1 F100\nG92 E-1\n"
|
||||
"default_value": "M92 E159\nG21\nG90\nM42 S255 P13;chamber lights\nM42 S255 P12;fume extraction\nM140 S{material_bed_temperature}\n\nM117 Homing Y ......\nG28 Y\nM117 Homing X ......\nG28 X\nM117 Homing Z ......\nG28 Z F100\nG1 Z10 F600\nG1 X70 Y20 F9000;go to wipe point\n\nM190 S{material_bed_temperature}\nM104 S120 T1\nM109 S{material_print_temperature} T0\nM104 S21 T1\n\nM117 purging nozzle....\n\nT0\nG92 E0;set E\nG1 E10 F100\nG92 E0\nG1 E-{retraction_amount} F600\nG92 E0\n\nM117 wiping nozzle....\n\nG1 X1 Y24 F3000\nG1 X70 F9000\n\nM117 Printing .....\n\nG1 E1 F100\nG92 E-1\n"
|
||||
},
|
||||
"machine_end_gcode": {
|
||||
"default_value": "; -- END GCODE --\nM106 S255\nM140 S5\nM104 S5 T0\nM104 S5 T1\nG1 X20.0 Y260.0 F6000\nG4 S7\nM84\nG4 S90\nM107\nM42 P12 S0\nM42 P13 S0\nM84\n; -- end of END GCODE --"
|
||||
|
|
|
|||
|
|
@ -219,8 +219,11 @@
|
|||
{
|
||||
"label": "Nozzle angle",
|
||||
"description": "The angle between the horizontal plane and the conical part right above the tip of the nozzle.",
|
||||
"default_value": 45,
|
||||
"unit": "°",
|
||||
"type": "int",
|
||||
"default_value": 45,
|
||||
"maximum_value": "89",
|
||||
"minimum_value": "1",
|
||||
"settable_per_mesh": false,
|
||||
"settable_per_extruder": false,
|
||||
"settable_per_meshgroup": false
|
||||
|
|
@ -615,7 +618,7 @@
|
|||
"label": "Line Width",
|
||||
"description": "Width of a single line. Generally, the width of each line should correspond to the width of the nozzle. However, slightly reducing this value could produce better prints.",
|
||||
"unit": "mm",
|
||||
"minimum_value": "0.0001",
|
||||
"minimum_value": "0.001",
|
||||
"minimum_value_warning": "0.5 * machine_nozzle_size",
|
||||
"maximum_value_warning": "2 * machine_nozzle_size",
|
||||
"default_value": 0.4,
|
||||
|
|
@ -629,7 +632,7 @@
|
|||
"label": "Wall Line Width",
|
||||
"description": "Width of a single wall line.",
|
||||
"unit": "mm",
|
||||
"minimum_value": "0.0001",
|
||||
"minimum_value": "0.001",
|
||||
"minimum_value_warning": "0.75 * machine_nozzle_size",
|
||||
"maximum_value_warning": "2 * machine_nozzle_size",
|
||||
"value": "line_width",
|
||||
|
|
@ -643,7 +646,7 @@
|
|||
"label": "Outer Wall Line Width",
|
||||
"description": "Width of the outermost wall line. By lowering this value, higher levels of detail can be printed.",
|
||||
"unit": "mm",
|
||||
"minimum_value": "0.0001",
|
||||
"minimum_value": "0.001",
|
||||
"minimum_value_warning": "0.75 * machine_nozzle_size if outer_inset_first else 0.1 * machine_nozzle_size",
|
||||
"maximum_value_warning": "2 * machine_nozzle_size",
|
||||
"default_value": 0.4,
|
||||
|
|
@ -656,7 +659,7 @@
|
|||
"label": "Inner Wall(s) Line Width",
|
||||
"description": "Width of a single wall line for all wall lines except the outermost one.",
|
||||
"unit": "mm",
|
||||
"minimum_value": "0.0001",
|
||||
"minimum_value": "0.001",
|
||||
"minimum_value_warning": "0.5 * machine_nozzle_size",
|
||||
"maximum_value_warning": "2 * machine_nozzle_size",
|
||||
"default_value": 0.4,
|
||||
|
|
@ -671,7 +674,7 @@
|
|||
"label": "Top/Bottom Line Width",
|
||||
"description": "Width of a single top/bottom line.",
|
||||
"unit": "mm",
|
||||
"minimum_value": "0.0001",
|
||||
"minimum_value": "0.001",
|
||||
"minimum_value_warning": "0.1 * machine_nozzle_size",
|
||||
"maximum_value_warning": "2 * machine_nozzle_size",
|
||||
"default_value": 0.4,
|
||||
|
|
@ -684,7 +687,7 @@
|
|||
"label": "Infill Line Width",
|
||||
"description": "Width of a single infill line.",
|
||||
"unit": "mm",
|
||||
"minimum_value": "0.0001",
|
||||
"minimum_value": "0.001",
|
||||
"minimum_value_warning": "0.75 * machine_nozzle_size",
|
||||
"maximum_value_warning": "3 * machine_nozzle_size",
|
||||
"default_value": 0.4,
|
||||
|
|
@ -698,7 +701,7 @@
|
|||
"label": "Skirt/Brim Line Width",
|
||||
"description": "Width of a single skirt or brim line.",
|
||||
"unit": "mm",
|
||||
"minimum_value": "0.0001",
|
||||
"minimum_value": "0.001",
|
||||
"minimum_value_warning": "0.75 * machine_nozzle_size",
|
||||
"maximum_value_warning": "3 * machine_nozzle_size",
|
||||
"default_value": 0.4,
|
||||
|
|
@ -713,7 +716,7 @@
|
|||
"label": "Support Line Width",
|
||||
"description": "Width of a single support structure line.",
|
||||
"unit": "mm",
|
||||
"minimum_value": "0.0001",
|
||||
"minimum_value": "0.001",
|
||||
"minimum_value_warning": "0.75 * machine_nozzle_size",
|
||||
"maximum_value_warning": "3 * machine_nozzle_size",
|
||||
"default_value": 0.4,
|
||||
|
|
@ -730,7 +733,7 @@
|
|||
"description": "Width of a single support interface line.",
|
||||
"unit": "mm",
|
||||
"default_value": 0.4,
|
||||
"minimum_value": "0.0001",
|
||||
"minimum_value": "0.001",
|
||||
"minimum_value_warning": "0.4 * machine_nozzle_size",
|
||||
"maximum_value_warning": "2 * machine_nozzle_size",
|
||||
"type": "float",
|
||||
|
|
@ -749,7 +752,7 @@
|
|||
"enabled": "resolveOrValue('prime_tower_enable')",
|
||||
"default_value": 0.4,
|
||||
"value": "line_width",
|
||||
"minimum_value": "0.0001",
|
||||
"minimum_value": "0.001",
|
||||
"minimum_value_warning": "0.75 * machine_nozzle_size",
|
||||
"maximum_value_warning": "2 * machine_nozzle_size",
|
||||
"settable_per_mesh": false,
|
||||
|
|
@ -1330,14 +1333,14 @@
|
|||
"material_print_temperature":
|
||||
{
|
||||
"label": "Printing Temperature",
|
||||
"description": "The temperature used for printing. Set at 0 to pre-heat the printer manually.",
|
||||
"description": "The temperature used for printing. If this is 0, the extruder will not heat up for this print.",
|
||||
"unit": "°C",
|
||||
"type": "float",
|
||||
"default_value": 210,
|
||||
"value": "default_material_print_temperature",
|
||||
"minimum_value": "-273.15",
|
||||
"minimum_value_warning": "0",
|
||||
"maximum_value_warning": "260",
|
||||
"maximum_value_warning": "270",
|
||||
"enabled": "not (material_flow_dependent_temperature) and machine_gcode_flavor != \"UltiGCode\"",
|
||||
"settable_per_mesh": false,
|
||||
"settable_per_extruder": true
|
||||
|
|
@ -1349,10 +1352,10 @@
|
|||
"unit": "°C",
|
||||
"type": "float",
|
||||
"default_value": 215,
|
||||
"value": "material_print_temperature + 5",
|
||||
"value": "material_print_temperature",
|
||||
"minimum_value": "-273.15",
|
||||
"minimum_value_warning": "0",
|
||||
"maximum_value_warning": "260",
|
||||
"maximum_value_warning": "270",
|
||||
"enabled": "machine_gcode_flavor != \"UltiGCode\"",
|
||||
"settable_per_mesh": false,
|
||||
"settable_per_extruder": true
|
||||
|
|
@ -1417,7 +1420,7 @@
|
|||
"material_bed_temperature":
|
||||
{
|
||||
"label": "Build Plate Temperature",
|
||||
"description": "The temperature used for the heated build plate. Set at 0 to pre-heat the printer manually.",
|
||||
"description": "The temperature used for the heated build plate. If this is 0, the bed will not heat up for this print.",
|
||||
"unit": "°C",
|
||||
"type": "float",
|
||||
"resolve": "max(extruderValues('material_bed_temperature'))",
|
||||
|
|
@ -3402,7 +3405,7 @@
|
|||
"type": "float",
|
||||
"default_value": 0.4,
|
||||
"value": "line_width",
|
||||
"minimum_value": "0.0001",
|
||||
"minimum_value": "0.001",
|
||||
"minimum_value_warning": "extruderValue(adhesion_extruder_nr, 'machine_nozzle_size') * 0.1",
|
||||
"maximum_value_warning": "extruderValue(adhesion_extruder_nr, 'machine_nozzle_size') * 2",
|
||||
"enabled": "resolveOrValue('adhesion_type') == 'raft'",
|
||||
|
|
@ -3417,7 +3420,7 @@
|
|||
"unit": "mm",
|
||||
"type": "float",
|
||||
"default_value": 0.4,
|
||||
"minimum_value": "0.0001",
|
||||
"minimum_value": "0",
|
||||
"minimum_value_warning": "extruderValue(adhesion_extruder_nr, 'raft_surface_line_width')",
|
||||
"maximum_value_warning": "extruderValue(adhesion_extruder_nr, 'raft_surface_line_width') * 3",
|
||||
"enabled": "resolveOrValue('adhesion_type') == 'raft'",
|
||||
|
|
@ -3450,7 +3453,7 @@
|
|||
"type": "float",
|
||||
"default_value": 0.7,
|
||||
"value": "line_width * 2",
|
||||
"minimum_value": "0.0001",
|
||||
"minimum_value": "0.001",
|
||||
"minimum_value_warning": "extruderValue(adhesion_extruder_nr, 'machine_nozzle_size') * 0.5",
|
||||
"maximum_value_warning": "extruderValue(adhesion_extruder_nr, 'machine_nozzle_size') * 3",
|
||||
"enabled": "resolveOrValue('adhesion_type') == 'raft'",
|
||||
|
|
@ -3497,7 +3500,7 @@
|
|||
"unit": "mm",
|
||||
"type": "float",
|
||||
"default_value": 0.8,
|
||||
"minimum_value": "0.0001",
|
||||
"minimum_value": "0.001",
|
||||
"value": "extruderValue(adhesion_extruder_nr, 'machine_nozzle_size') * 2",
|
||||
"minimum_value_warning": "extruderValue(adhesion_extruder_nr, 'machine_nozzle_size') * 0.5",
|
||||
"maximum_value_warning": "extruderValue(adhesion_extruder_nr, 'machine_nozzle_size') * 3",
|
||||
|
|
@ -3514,7 +3517,7 @@
|
|||
"type": "float",
|
||||
"default_value": 1.6,
|
||||
"value": "raft_base_line_width * 2",
|
||||
"minimum_value": "0.0001",
|
||||
"minimum_value": "0",
|
||||
"minimum_value_warning": "extruderValue(adhesion_extruder_nr, 'raft_base_line_width')",
|
||||
"maximum_value_warning": "100",
|
||||
"enabled": "resolveOrValue('adhesion_type') == 'raft'",
|
||||
|
|
@ -3871,8 +3874,6 @@
|
|||
"default_value": 200,
|
||||
"minimum_value_warning": "-1000",
|
||||
"maximum_value_warning": "1000",
|
||||
"maximum_value": "machine_depth - resolveOrValue('prime_tower_size')",
|
||||
"minimum_value": "0",
|
||||
"maximum_value": "machine_depth / 2 - resolveOrValue('prime_tower_size') if machine_center_is_zero else machine_depth - resolveOrValue('prime_tower_size')",
|
||||
"minimum_value": "machine_depth / -2 if machine_center_is_zero else 0",
|
||||
"settable_per_mesh": false,
|
||||
|
|
|
|||
28
resources/definitions/folgertech_FT-5.def.json
Normal file
28
resources/definitions/folgertech_FT-5.def.json
Normal file
|
|
@ -0,0 +1,28 @@
|
|||
{
|
||||
"version": 2,
|
||||
"name": "Folger Tech FT-5",
|
||||
"inherits": "fdmprinter",
|
||||
"metadata": {
|
||||
"visible": true,
|
||||
"author": "Jaime van Kessel & Paul Bussiere",
|
||||
"manufacturer": "Folger Tech",
|
||||
"category": "Other",
|
||||
"file_formats": "text/x-gcode",
|
||||
"platform": "FT-5_build_plate.stl"
|
||||
},
|
||||
"overrides": {
|
||||
"machine_heated_bed": { "default_value": true },
|
||||
"machine_width": { "default_value": 300 },
|
||||
"machine_height": { "default_value": 400 },
|
||||
"machine_depth": { "default_value": 300 },
|
||||
"material_diameter": { "default_value": 1.75 },
|
||||
"gantry_height": { "default_value": 55 },
|
||||
|
||||
"machine_start_gcode": {
|
||||
"default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG1 Z15.0 F9000 ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E3 ;extrude 3mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F9000\n;Put printing message on LCD screen\nM117 Printing..."
|
||||
},
|
||||
"machine_end_gcode": {
|
||||
"default_value": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning"
|
||||
}
|
||||
}
|
||||
}
|
||||
50
resources/definitions/helloBEEprusa.def.json
Normal file
50
resources/definitions/helloBEEprusa.def.json
Normal file
|
|
@ -0,0 +1,50 @@
|
|||
{
|
||||
"id": "BEEVERYCREATIVE-helloBEEprusa",
|
||||
"version": 2,
|
||||
"name": "Hello BEE Prusa",
|
||||
"inherits": "fdmprinter",
|
||||
"metadata": {
|
||||
"visible": true,
|
||||
"author": "BEEVERYCREATIVE",
|
||||
"manufacturer": "BEEVERYCREATIVE",
|
||||
"category": "Other",
|
||||
"platform": "BEEVERYCREATIVE-helloBEEprusa.stl",
|
||||
"platform_offset": [-226, -75, -196],
|
||||
"file_formats": "text/x-gcode"
|
||||
},
|
||||
|
||||
"overrides": {
|
||||
"machine_name": { "default_value": "hello BEE prusa" },
|
||||
"machine_start_gcode": { "default_value": "; -- START GCODE --\nG21 ;set units to millimetres\nG90 ;set to absolute positioning\nM107 ;set fan speed to zero (turned off)\nG28 X0 Y0 ;move to the X/Y origin (Home)\nG28 Z0 ;move to the Z origin (Home)\nG92 E0 ;zero the extruded length\nG1 F3600 ;set feedrate to 60 mm/sec\n; -- end of START GCODE --" },
|
||||
"machine_end_gcode": { "default_value": "; -- END GCODE --\nM104 S0 ;set extruder temperature to zero (turned off)\nM140 S0 ;set bed temperature to zero (turned off)\nG28 X0 Y0 ;move to the X/Y origin (Home)\nM84 ;turn off steppers\n; -- end of END GCODE --" },
|
||||
"machine_width": { "default_value": 185 },
|
||||
"machine_depth": { "default_value": 200 },
|
||||
"machine_height": { "default_value": 190 },
|
||||
"machine_heated_bed": { "default_value": true },
|
||||
"machine_center_is_zero": { "default_value": false },
|
||||
"material_print_temperature": { "default_value": 220 },
|
||||
"material_bed_temperature": { "default_value": 60 },
|
||||
"material_diameter": { "default_value": 1.75 },
|
||||
"layer_height": { "default_value": 0.2 },
|
||||
"layer_height_0": { "default_value": 0.2 },
|
||||
"wall_line_count": { "default_value": 3 },
|
||||
"wall_thickness": { "default_value": 1.2 },
|
||||
"top_bottom_thickness": { "default_value": 1.2 },
|
||||
"infill_sparse_density": { "default_value": 20 },
|
||||
"infill_overlap": { "default_value": 15 },
|
||||
"speed_print": { "default_value": 60 },
|
||||
"speed_travel": { "default_value": 160 },
|
||||
"speed_layer_0": { "default_value": 30 },
|
||||
"speed_wall_x": { "default_value": 35 },
|
||||
"speed_wall_0": { "default_value": 30 },
|
||||
"speed_infill": { "default_value": 60 },
|
||||
"speed_topbottom": { "default_value": 20 },
|
||||
"skirt_brim_speed": { "default_value": 35 },
|
||||
"skirt_line_count": { "default_value": 4 },
|
||||
"skirt_brim_minimal_length": { "default_value": 30 },
|
||||
"skirt_gap": { "default_value": 6 },
|
||||
"cool_fan_full_at_height": { "default_value": 0.4 },
|
||||
"retraction_speed": { "default_value": 50.0},
|
||||
"retraction_amount": { "default_value": 5.2}
|
||||
}
|
||||
}
|
||||
205
resources/definitions/renkforce_rf100.def.json
Normal file
205
resources/definitions/renkforce_rf100.def.json
Normal file
|
|
@ -0,0 +1,205 @@
|
|||
{
|
||||
"id": "RF100",
|
||||
"version": 2,
|
||||
"name": "Renkforce RF100",
|
||||
"inherits": "fdmprinter",
|
||||
"metadata": {
|
||||
"author": "Simon Peter (based on RF100.ini by Conrad Electronic SE)",
|
||||
"category": "Other",
|
||||
"file_formats": "text/x-gcode",
|
||||
"manufacturer": "Renkforce",
|
||||
"visible": true
|
||||
},
|
||||
|
||||
"overrides": {
|
||||
"adhesion_type": {
|
||||
"default_value": "skirt"
|
||||
},
|
||||
"bottom_thickness": {
|
||||
"value": "0.5"
|
||||
},
|
||||
"brim_line_count": {
|
||||
"value": "20.0"
|
||||
},
|
||||
"cool_fan_enabled": {
|
||||
"value": "True"
|
||||
},
|
||||
"cool_fan_full_at_height": {
|
||||
"value": "0.5"
|
||||
},
|
||||
"cool_fan_speed_max": {
|
||||
"value": "100.0"
|
||||
},
|
||||
"cool_fan_speed_min": {
|
||||
"value": "100.0"
|
||||
},
|
||||
"cool_lift_head": {
|
||||
"value": "True"
|
||||
},
|
||||
"cool_min_layer_time": {
|
||||
"value": "5.0"
|
||||
},
|
||||
"cool_min_speed": {
|
||||
"value": "10.0"
|
||||
},
|
||||
"infill_before_walls": {
|
||||
"value": "True"
|
||||
},
|
||||
"infill_overlap": {
|
||||
"value": "15.0"
|
||||
},
|
||||
"layer_0_z_overlap": {
|
||||
"value": "0.22"
|
||||
},
|
||||
"layer_height_0": {
|
||||
"value": "0.3"
|
||||
},
|
||||
"machine_depth": {
|
||||
"value": "100"
|
||||
},
|
||||
"machine_end_gcode": {
|
||||
"default_value": ";End GCode\nM104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F{speed_travel} ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning"
|
||||
},
|
||||
"machine_gcode_flavor": {
|
||||
"default_value": "RepRap (Marlin/Sprinter)"
|
||||
},
|
||||
"machine_height": {
|
||||
"value": "100"
|
||||
},
|
||||
"machine_name": {
|
||||
"default_value": "Renkforce RF100"
|
||||
},
|
||||
"machine_start_gcode": {
|
||||
"default_value": ";Sliced at: {day} {date} {time}\nG21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG1 Z15.0 F{speed_travel} ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E3 ;extrude 3mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F{speed_travel}\nM117 Printing..."
|
||||
},
|
||||
"machine_width": {
|
||||
"value": "100"
|
||||
},
|
||||
"material_bed_temperature": {
|
||||
"visible": "False"
|
||||
},
|
||||
"material_diameter": {
|
||||
"value": "1.75"
|
||||
},
|
||||
"material_print_temperature": {
|
||||
"value": "210.0"
|
||||
},
|
||||
"ooze_shield_enabled": {
|
||||
"value": "True"
|
||||
},
|
||||
"raft_airgap": {
|
||||
"value": "0.22"
|
||||
},
|
||||
"raft_base_line_spacing": {
|
||||
"value": "3.0"
|
||||
},
|
||||
"raft_base_line_width": {
|
||||
"value": "1.0"
|
||||
},
|
||||
"raft_base_thickness": {
|
||||
"value": "0.3"
|
||||
},
|
||||
"raft_interface_line_spacing": {
|
||||
"value": "3.0"
|
||||
},
|
||||
"raft_interface_line_width": {
|
||||
"value": "0.4"
|
||||
},
|
||||
"raft_interface_thickness": {
|
||||
"value": "0.27"
|
||||
},
|
||||
"raft_margin": {
|
||||
"value": "5.0"
|
||||
},
|
||||
"raft_surface_layers": {
|
||||
"value": "2.0"
|
||||
},
|
||||
"raft_surface_line_spacing": {
|
||||
"value": "3.0"
|
||||
},
|
||||
"raft_surface_line_width": {
|
||||
"value": "0.4"
|
||||
},
|
||||
"raft_surface_thickness": {
|
||||
"value": "0.27"
|
||||
},
|
||||
"retraction_amount": {
|
||||
"value": "2.0"
|
||||
},
|
||||
"retraction_combing": {
|
||||
"default_value": "all"
|
||||
},
|
||||
"retraction_enable": {
|
||||
"value": "True"
|
||||
},
|
||||
"retraction_hop_enabled": {
|
||||
"value": "1.0"
|
||||
},
|
||||
"retraction_min_travel": {
|
||||
"value": "1.5"
|
||||
},
|
||||
"retraction_speed": {
|
||||
"value": "40.0"
|
||||
},
|
||||
"skin_overlap": {
|
||||
"value": "15.0"
|
||||
},
|
||||
"skirt_brim_minimal_length": {
|
||||
"value": "150.0"
|
||||
},
|
||||
"skirt_gap": {
|
||||
"value": "3.0"
|
||||
},
|
||||
"skirt_line_count": {
|
||||
"value": "1.0"
|
||||
},
|
||||
"speed_infill": {
|
||||
"value": "50.0"
|
||||
},
|
||||
"speed_layer_0": {
|
||||
"value": "30.0"
|
||||
},
|
||||
"speed_print": {
|
||||
"value": "50.0"
|
||||
},
|
||||
"speed_topbottom": {
|
||||
"value": "30.0"
|
||||
},
|
||||
"speed_travel": {
|
||||
"value": "50.0"
|
||||
},
|
||||
"speed_wall_0": {
|
||||
"value": "25.0"
|
||||
},
|
||||
"speed_wall_x": {
|
||||
"value": "35.0"
|
||||
},
|
||||
"support_angle": {
|
||||
"value": "60.0"
|
||||
},
|
||||
"support_enable": {
|
||||
"value": "False"
|
||||
},
|
||||
"support_infill_rate": {
|
||||
"value": "15.0"
|
||||
},
|
||||
"support_pattern": {
|
||||
"default_value": "lines"
|
||||
},
|
||||
"support_type": {
|
||||
"default_value": "everywhere"
|
||||
},
|
||||
"support_xy_distance": {
|
||||
"value": "0.5"
|
||||
},
|
||||
"support_z_distance": {
|
||||
"value": "0.1"
|
||||
},
|
||||
"top_thickness": {
|
||||
"value": "0.5"
|
||||
},
|
||||
"wall_thickness": {
|
||||
"value": "0.8"
|
||||
}
|
||||
}
|
||||
}
|
||||
|
|
@ -106,6 +106,7 @@
|
|||
"line_width": { "value": "machine_nozzle_size * 0.875" },
|
||||
"machine_min_cool_heat_time_window": { "value": "15" },
|
||||
"default_material_print_temperature": { "value": "200" },
|
||||
"material_print_temperature_layer_0": { "value": "material_print_temperature + 5" },
|
||||
"material_bed_temperature": { "maximum_value": "115" },
|
||||
"material_bed_temperature_layer_0": { "maximum_value": "115" },
|
||||
"material_standby_temperature": { "value": "100" },
|
||||
|
|
|
|||
|
|
@ -62,7 +62,7 @@
|
|||
"default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG1 Z15.0 F9000 ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E6 ;extrude 6 mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F9000\n;Put printing message on LCD screen\nM117 Printing..."
|
||||
},
|
||||
"machine_end_gcode": {
|
||||
"default_value": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning"
|
||||
"value": "'M104 S0 ;extruder heater off' + ('\\nM140 S0 ;heated bed heater off' if machine_heated_bed else '') + '\\nG91 ;relative positioning\\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\\nM84 ;steppers off\\nG90 ;absolute positioning'"
|
||||
}
|
||||
}
|
||||
}
|
||||
|
|
|
|||
84
resources/definitions/vertex_k8400.def.json
Normal file
84
resources/definitions/vertex_k8400.def.json
Normal file
|
|
@ -0,0 +1,84 @@
|
|||
{
|
||||
"id": "vertex_k8400",
|
||||
"version": 2,
|
||||
"name": "Vertex K8400",
|
||||
"inherits": "fdmprinter",
|
||||
"metadata": {
|
||||
"visible": true,
|
||||
"manufacturer": "Velleman",
|
||||
"category": "Other",
|
||||
"file_formats": "text/x-gcode",
|
||||
"icon": "icon_ultimaker2",
|
||||
"platform": "Vertex_build_panel.stl",
|
||||
"platform_offset": [0, -2, 0],
|
||||
"supports_usb_connection": true,
|
||||
"supported_actions": ["MachineSettingsAction"]
|
||||
},
|
||||
"overrides": {
|
||||
"machine_name": { "default_value": "Vertex K8400" },
|
||||
"machine_heated_bed": {
|
||||
"default_value": true
|
||||
},
|
||||
"material_bed_temperature": {
|
||||
"default_value": 0
|
||||
},
|
||||
"material_bed_temperature_layer_0": {
|
||||
"default_value": 0
|
||||
},
|
||||
"machine_width": {
|
||||
"default_value": 200
|
||||
},
|
||||
"machine_height": {
|
||||
"default_value": 190
|
||||
},
|
||||
"machine_depth": {
|
||||
"default_value": 200
|
||||
},
|
||||
"machine_disallowed_areas": { "default_value": [
|
||||
[[-100,100],[-100,80],[100,80],[100,100]]
|
||||
]},
|
||||
"machine_center_is_zero": {
|
||||
"default_value": false
|
||||
},
|
||||
"machine_nozzle_size": {
|
||||
"default_value": 0.35
|
||||
},
|
||||
"material_diameter": {
|
||||
"default_value": 1.75
|
||||
},
|
||||
"machine_head_polygon": {
|
||||
"default_value": [
|
||||
[-60, -18],
|
||||
[-60, 40],
|
||||
[18, 40],
|
||||
[18, -18]
|
||||
]
|
||||
},
|
||||
"machine_head_with_fans_polygon": {
|
||||
"default_value": [
|
||||
[-60, -40],
|
||||
[-60, 40],
|
||||
[18, 40],
|
||||
[18, -40]
|
||||
]
|
||||
},
|
||||
"gantry_height": {
|
||||
"default_value": 18
|
||||
},
|
||||
"machine_nozzle_heat_up_speed": {
|
||||
"default_value": 2
|
||||
},
|
||||
"machine_nozzle_cool_down_speed": {
|
||||
"default_value": 2
|
||||
},
|
||||
"machine_gcode_flavor": {
|
||||
"default_value": "RepRap (Marlin/Sprinter)"
|
||||
},
|
||||
"machine_start_gcode": {
|
||||
"default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG1 Z15.0 F9000 ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E3 ;extrude 3mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F9000\n;Put printing message on LCD screen\nM117 Printing..."
|
||||
},
|
||||
"machine_end_gcode": {
|
||||
"default_value": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning"
|
||||
}
|
||||
}
|
||||
}
|
||||
92
resources/definitions/vertex_k8400_dual.def.json
Normal file
92
resources/definitions/vertex_k8400_dual.def.json
Normal file
|
|
@ -0,0 +1,92 @@
|
|||
{
|
||||
"id": "vertex_k8400_dual",
|
||||
"version": 2,
|
||||
"name": "Vertex K8400 Dual",
|
||||
"inherits": "fdmprinter",
|
||||
"metadata": {
|
||||
"visible": true,
|
||||
"manufacturer": "Velleman",
|
||||
"category": "Other",
|
||||
"file_formats": "text/x-gcode",
|
||||
"icon": "icon_ultimaker2",
|
||||
"platform": "Vertex_build_panel.stl",
|
||||
"platform_offset": [0, -2, 0],
|
||||
"machine_extruder_trains": {
|
||||
"0": "vertex_k8400_dual_1st",
|
||||
"1": "vertex_k8400_dual_2nd"
|
||||
}
|
||||
},
|
||||
"overrides": {
|
||||
"machine_name": { "default_value": "Vertex K8400 Dual" },
|
||||
"machine_heated_bed": {
|
||||
"default_value": true
|
||||
},
|
||||
"material_bed_temperature": {
|
||||
"default_value": 0
|
||||
},
|
||||
"material_bed_temperature_layer_0": {
|
||||
"default_value": 0
|
||||
},
|
||||
"machine_width": {
|
||||
"default_value": 223.7
|
||||
},
|
||||
"machine_height": {
|
||||
"default_value": 190
|
||||
},
|
||||
"machine_depth": {
|
||||
"default_value": 200
|
||||
},
|
||||
"machine_disallowed_areas": { "default_value": [
|
||||
[[-111.85,100],[111.85,100],[-111.85,80],[111.85,80]]
|
||||
]},
|
||||
"machine_center_is_zero": {
|
||||
"default_value": false
|
||||
},
|
||||
"machine_use_extruder_offset_to_offset_coords": {
|
||||
"default_value": true
|
||||
},
|
||||
"machine_nozzle_size": {
|
||||
"default_value": 0.35
|
||||
},
|
||||
"material_diameter": {
|
||||
"default_value": 1.75
|
||||
},
|
||||
"machine_head_polygon": {
|
||||
"default_value": [
|
||||
[-60, -18],
|
||||
[-60, 40],
|
||||
[18, 40],
|
||||
[18, -18]
|
||||
]
|
||||
},
|
||||
"machine_head_with_fans_polygon": {
|
||||
"default_value": [
|
||||
[-60, -40],
|
||||
[-60, 40],
|
||||
[18, 40],
|
||||
[18, -40]
|
||||
]
|
||||
},
|
||||
"gantry_height": {
|
||||
"default_value": 18
|
||||
},
|
||||
"machine_nozzle_heat_up_speed": {
|
||||
"default_value": 2
|
||||
},
|
||||
"machine_nozzle_cool_down_speed": {
|
||||
"default_value": 2
|
||||
},
|
||||
"machine_extruder_count": {
|
||||
"default_value": 2
|
||||
},
|
||||
"machine_gcode_flavor": {
|
||||
"default_value": "RepRap (Marlin/Sprinter)"
|
||||
},
|
||||
"machine_start_gcode": {
|
||||
"default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG1 Z15.0 F9000 ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E3 ;extrude 3mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F9000\n;Put printing message on LCD screen\nM117 Printing..."
|
||||
},
|
||||
"machine_end_gcode": {
|
||||
"default_value": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning"
|
||||
}
|
||||
}
|
||||
}
|
||||
Loading…
Add table
Add a link
Reference in a new issue