mirror of
https://github.com/Ultimaker/Cura.git
synced 2025-08-08 06:23:59 -06:00
Merge branch 'master' into feature_extruder_per_feature
Conflict in FDMPrinter: The Cubic Subdivision Radius setting was removed. No need to limit that setting any more.
This commit is contained in:
Ghostkeeper
commit
9450453b42
414 changed files with 16128 additions and 4264 deletions
55
resources/definitions/alya3dp.def.json
Normal file
55
resources/definitions/alya3dp.def.json
Normal file
|
|
@ -0,0 +1,55 @@
|
|||
{
|
||||
"id": "alya3dp",
|
||||
"name": "ALYA",
|
||||
"version": 2,
|
||||
"inherits": "fdmprinter",
|
||||
"metadata": {
|
||||
"visible": true,
|
||||
"author": "ALYA",
|
||||
"manufacturer": "ALYA",
|
||||
"category": "Other",
|
||||
"file_formats": "text/x-gcode"
|
||||
},
|
||||
|
||||
"overrides": {
|
||||
"machine_width": {
|
||||
"default_value": 100
|
||||
},
|
||||
"machine_height": {
|
||||
"default_value": 133
|
||||
},
|
||||
"machine_depth": {
|
||||
"default_value": 100
|
||||
},
|
||||
"machine_center_is_zero": {
|
||||
"default_value": false
|
||||
},
|
||||
"machine_nozzle_size": {
|
||||
"default_value": 0.4
|
||||
},
|
||||
"machine_head_shape_min_x": {
|
||||
"default_value": 75
|
||||
},
|
||||
"machine_head_shape_min_y": {
|
||||
"default_value": 18
|
||||
},
|
||||
"machine_head_shape_max_x": {
|
||||
"default_value": 18
|
||||
},
|
||||
"machine_head_shape_max_y": {
|
||||
"default_value": 35
|
||||
},
|
||||
"machine_nozzle_gantry_distance": {
|
||||
"default_value": 55
|
||||
},
|
||||
"machine_gcode_flavor": {
|
||||
"default_value": "RepRap"
|
||||
},
|
||||
"machine_start_gcode": {
|
||||
"default_value": ";Sliced at: {day} {date} {time}\n;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}\n;Print time: {print_time}\n;Filament used: {filament_amount}m {filament_weight}g\n;Filament cost: {filament_cost}\n;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line\n;M109 S{print_temperature} ;Uncomment to add your own temperature line\nG21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to max endstops\nG1 Z115.0 F{travel_speed} ;move th e platform up 20mm\nG28 Z0 ;move Z to max endstop\nG1 Z15.0 F{travel_speed} ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E3 ;extrude 3mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F{travel_speed}\nM301 H1 P26.38 I2.57 D67.78\n;Put printing message on LCD screen\nM117 Printing..."
|
||||
},
|
||||
"machine_end_gcode": {
|
||||
"default_value": ";End GCode\nM104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nG28 Z0\nM84 ;steppers off\nG90 ;absolute positioning\n;{profile_string}"
|
||||
}
|
||||
}
|
||||
}
|
||||
|
|
@ -9,12 +9,18 @@
|
|||
"manufacturer": "Cartesio bv",
|
||||
"category": "Other",
|
||||
"file_formats": "text/x-gcode",
|
||||
|
||||
"has_machine_quality": true,
|
||||
"has_materials": true,
|
||||
"has_machine_materials": true,
|
||||
"has_variant_materials": true,
|
||||
"has_variants": true,
|
||||
|
||||
"variants_name": "Nozzle size",
|
||||
"preferred_variant": "*0.4*",
|
||||
"preferred_variant": "*0.8*",
|
||||
"preferred_material": "*pla*",
|
||||
"preferred_quality": "*draft*",
|
||||
"preferred_quality": "*high*",
|
||||
|
||||
"machine_extruder_trains":
|
||||
{
|
||||
"0": "cartesio_extruder_0",
|
||||
|
|
@ -29,7 +35,8 @@
|
|||
},
|
||||
|
||||
"overrides": {
|
||||
"machine_extruder_count": { "default_value": 4 },
|
||||
"machine_extruder_count": { "default_value": 2 },
|
||||
"material_diameter": { "default_value": 1.75 },
|
||||
"machine_heated_bed": { "default_value": true },
|
||||
"machine_center_is_zero": { "default_value": false },
|
||||
"gantry_height": { "default_value": 35 },
|
||||
|
|
@ -39,20 +46,18 @@
|
|||
"machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
|
||||
"material_print_temp_wait": { "default_value": false },
|
||||
"material_bed_temp_wait": { "default_value": false },
|
||||
"infill_pattern": { "default_value": "grid"},
|
||||
"prime_tower_enable": { "default_value": true },
|
||||
"prime_tower_wall_thickness": { "resolve": 0.7 },
|
||||
"prime_tower_position_x": { "default_value": 30 },
|
||||
"prime_tower_position_y": { "default_value": 71 },
|
||||
"prime_tower_position_x": { "default_value": 50 },
|
||||
"prime_tower_position_y": { "default_value": 150 },
|
||||
"machine_start_gcode": {
|
||||
"default_value": "\nM104 S120 T1\nM104 S120 T2\nM104 S120 T3\n\nM92 E159\n\nG21\nG90\nM42 S255 P13;chamber lights\nM42 S255 P12;fume extraction\n\nM117 Homing Y ......\nG28 Y\nM117 Homing X ......\nG28 X\nM117 Homing Z ......\nG28 Z F100\nG1 Z10 F600\nG1 X70 Y20 F9000;go to wipe point\n\nM190 S{material_bed_temperature_layer_0}\n\nM117 Heating for 50 sec.\nG4 S20\nM117 Heating for 30 sec.\nG4 S20\nM117 Heating for 10 sec.\nM300 S600 P1000\nG4 S9\n\nM117 purging nozzle....\nT0\nG92 E0;set E\nG1 E10 F100\nG92 E0\nG1 E-1 F600\n\nM117 wiping nozzle....\nG1 X1 Y24 F3000\nG1 X70 F9000\n\nM104 S21 T1\nM104 S21 T2\nM104 S21 T3\n\nM117 Printing .....\n"
|
||||
"default_value": "\nM104 S120 T1\nM104 S120 T2\nM104 S120 T3\n\nM92 E159\n\nG21\nG90\nM42 S255 P13;chamber lights\nM42 S255 P12;fume extraction\n\nM117 Homing Y ......\nG28 Y\nM117 Homing X ......\nG28 X\nM117 Homing Z ......\nG28 Z F100\nG1 Z10 F600\nG1 X70 Y20 F9000;go to wipe point\n\nM190 S{material_bed_temperature_layer_0}\n\nM117 Heating for 50 sec.\nG4 S20\nM117 Heating for 30 sec.\nG4 S20\nM117 Heating for 10 sec.\nM300 S1200 P1000\nG4 S9\n\nM117 purging nozzle....\nT0\nG92 E0;set E\nG1 E10 F100\nG92 E0\nG1 E-1 F600\n\nM117 wiping nozzle....\nG1 X1 Y24 F3000\nG1 X70 F9000\nG1 Z10 F900\n\nM104 S21 T1\nM104 S21 T2\nM104 S21 T3\n\nM117 Printing .....\n"
|
||||
},
|
||||
"machine_end_gcode": {
|
||||
"default_value": "; -- END GCODE --\nM106 S255\nM140 S5\nM104 S5 T0\nM104 S5 T1\nM104 S5 T2\nM104 S5 T3\nG1 X20.0 Y260.0 F6000\nG4 S7\nM84\nG4 S90\nM107\nM42 P12 S0\nM42 P13 S0\nM84\nT0\n; -- end of GCODE --"
|
||||
"default_value": "; -- END GCODE --\nM106 S255\nM140 S5\nM104 S5 T0\nM104 S5 T1\nM104 S5 T2\nM104 S5 T3\n\nG91\nG1 Z1 F900\nG90\n\nG1 X20.0 Y260.0 F6000\nG4 S7\nM84\nG4 S90\nM107\nM42 P12 S0\nM42 P13 S0\nM84\nT0\n; -- end of GCODE --"
|
||||
},
|
||||
"layer_height": { "maximum_value": "(0.8 * min(extruderValues('machine_nozzle_size')))" },
|
||||
"layer_height_0": { "maximum_value": "(0.8 * min(extruderValues('machine_nozzle_size')))" },
|
||||
"layer_height_0": { "resolve": "0.2 if min(extruderValues('machine_nozzle_size')) < 0.3 else 0.3 "},
|
||||
"machine_nozzle_heat_up_speed": {"default_value": 20},
|
||||
"machine_nozzle_cool_down_speed": {"default_value": 20},
|
||||
"machine_min_cool_heat_time_window": {"default_value": 5}
|
||||
|
|
|
|||
|
|
@ -10,6 +10,17 @@
|
|||
"category": "Custom",
|
||||
"file_formats": "text/x-gcode",
|
||||
"has_materials": true,
|
||||
"machine_extruder_trains":
|
||||
{
|
||||
"0": "custom_extruder_1",
|
||||
"1": "custom_extruder_2",
|
||||
"2": "custom_extruder_3",
|
||||
"3": "custom_extruder_4",
|
||||
"4": "custom_extruder_5",
|
||||
"5": "custom_extruder_6",
|
||||
"6": "custom_extruder_7",
|
||||
"7": "custom_extruder_8"
|
||||
},
|
||||
"first_start_actions": ["MachineSettingsAction"]
|
||||
}
|
||||
}
|
||||
|
|
|
|||
|
|
@ -14,23 +14,29 @@
|
|||
},
|
||||
"overrides": {
|
||||
"machine_name": { "default_value": "Delta Go" },
|
||||
"material_diameter": { "default_value": 1.75 },
|
||||
"material_diameter": { "default_value": 1.75 },
|
||||
"default_material_print_temperature": { "default_value": 210 },
|
||||
"speed_travel": { "default_value": 150 },
|
||||
"prime_tower_size": { "default_value": 8.66 },
|
||||
"infill_sparse_density": { "default_value": 10 },
|
||||
"prime_tower_size": { "default_value": 8.66 },
|
||||
"infill_sparse_density": { "default_value": 10 },
|
||||
"speed_wall_x": { "default_value": 30 },
|
||||
"speed_wall_0": { "default_value": 30 },
|
||||
"speed_topbottom": { "default_value": 20 },
|
||||
"layer_height": { "default_value": 0.2 },
|
||||
"layer_height": { "default_value": 0.15 },
|
||||
"speed_print": { "default_value": 30 },
|
||||
"machine_heated_bed": { "default_value": false },
|
||||
"machine_center_is_zero": { "default_value": true },
|
||||
"machine_height": { "default_value": 127 },
|
||||
"machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
|
||||
"machine_heated_bed": { "default_value": false },
|
||||
"machine_center_is_zero": { "default_value": true },
|
||||
"machine_height": { "default_value": 154 },
|
||||
"machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
|
||||
"machine_depth": { "default_value": 115 },
|
||||
"machine_width": { "default_value": 115 },
|
||||
"retraction_amount": { "default_value": 4.2 },
|
||||
"retraction_speed": { "default_value": 400 },
|
||||
"machine_shape": { "default_value": "elliptic"}
|
||||
"raft_airgap": { "default_value": 0.15 },
|
||||
"retraction_hop_enabled": { "value": "True" },
|
||||
"retraction_amount": { "default_value": 4.1 },
|
||||
"retraction_speed": { "default_value": 500 },
|
||||
"retraction_hop": { "value": "0.2" },
|
||||
"retraction_hop_only_when_collides": { "value": "True" },
|
||||
"brim_width": { "value": "5" },
|
||||
"machine_shape": { "default_value": "elliptic"}
|
||||
}
|
||||
}
|
||||
|
|
|
|||
|
|
@ -7,6 +7,7 @@
|
|||
"type": "extruder",
|
||||
"author": "Ultimaker B.V.",
|
||||
"manufacturer": "Ultimaker",
|
||||
"setting_version": 1,
|
||||
"visible": false
|
||||
},
|
||||
"settings":
|
||||
|
|
@ -25,10 +26,22 @@
|
|||
"type": "extruder",
|
||||
"default_value": "0",
|
||||
"settable_per_mesh": true,
|
||||
"settable_per_extruder": false,
|
||||
"settable_per_extruder": true,
|
||||
"settable_per_meshgroup": false,
|
||||
"settable_globally": false
|
||||
},
|
||||
"machine_nozzle_size":
|
||||
{
|
||||
"label": "Nozzle Diameter",
|
||||
"description": "The inner diameter of the nozzle. Change this setting when using a non-standard nozzle size.",
|
||||
"unit": "mm",
|
||||
"type": "float",
|
||||
"default_value": 0.4,
|
||||
"minimum_value": "0.001",
|
||||
"maximum_value_warning": "10",
|
||||
"settable_per_mesh": false,
|
||||
"settable_per_extruder": true
|
||||
},
|
||||
"machine_nozzle_offset_x":
|
||||
{
|
||||
"label": "Nozzle X Offset",
|
||||
|
|
|
|||
|
|
@ -8,6 +8,7 @@
|
|||
"author": "Ultimaker B.V.",
|
||||
"category": "Ultimaker",
|
||||
"manufacturer": "Ultimaker",
|
||||
"setting_version": 1,
|
||||
"file_formats": "text/x-gcode;application/x-stl-ascii;application/x-stl-binary;application/x-wavefront-obj;application/x3g",
|
||||
"visible": false,
|
||||
"has_materials": true,
|
||||
|
|
@ -940,7 +941,7 @@
|
|||
"unit": "mm",
|
||||
"default_value": 0.8,
|
||||
"minimum_value": "0",
|
||||
"minimum_value_warning": "3 * resolveOrValue('layer_height')",
|
||||
"minimum_value_warning": "0.2 + resolveOrValue('layer_height')",
|
||||
"maximum_value": "machine_height",
|
||||
"type": "float",
|
||||
"value": "top_bottom_thickness",
|
||||
|
|
@ -956,7 +957,7 @@
|
|||
"minimum_value": "0",
|
||||
"maximum_value_warning": "100",
|
||||
"type": "int",
|
||||
"minimum_value_warning": "4",
|
||||
"minimum_value_warning": "2",
|
||||
"value": "0 if infill_sparse_density == 100 else math.ceil(round(top_thickness / resolveOrValue('layer_height'), 4))",
|
||||
"limit_to_extruder": "top_bottom_extruder_nr",
|
||||
"settable_per_mesh": true
|
||||
|
|
@ -970,7 +971,7 @@
|
|||
"unit": "mm",
|
||||
"default_value": 0.6,
|
||||
"minimum_value": "0",
|
||||
"minimum_value_warning": "3 * resolveOrValue('layer_height')",
|
||||
"minimum_value_warning": "0.2 + resolveOrValue('layer_height')",
|
||||
"type": "float",
|
||||
"value": "top_bottom_thickness",
|
||||
"maximum_value": "machine_height",
|
||||
|
|
@ -983,7 +984,7 @@
|
|||
"label": "Bottom Layers",
|
||||
"description": "The number of bottom layers. When calculated by the bottom thickness, this value is rounded to a whole number.",
|
||||
"minimum_value": "0",
|
||||
"minimum_value_warning": "4",
|
||||
"minimum_value_warning": "2",
|
||||
"default_value": 6,
|
||||
"type": "int",
|
||||
"value": "999999 if infill_sparse_density == 100 else math.ceil(round(bottom_thickness / resolveOrValue('layer_height'), 4))",
|
||||
|
|
@ -1317,20 +1318,6 @@
|
|||
"limit_to_extruder": "infill_extruder_nr",
|
||||
"settable_per_mesh": true
|
||||
},
|
||||
"sub_div_rad_mult":
|
||||
{
|
||||
"label": "Cubic Subdivision Radius",
|
||||
"description": "A multiplier on the radius from the center of each cube to check for the boundary of the model, as to decide whether this cube should be subdivided. Larger values lead to more subdivisions, i.e. more small cubes.",
|
||||
"unit": "%",
|
||||
"type": "float",
|
||||
"default_value": 100,
|
||||
"minimum_value": "0",
|
||||
"minimum_value_warning": "100",
|
||||
"maximum_value_warning": "200",
|
||||
"enabled": "infill_sparse_density > 0 and infill_pattern == 'cubicsubdiv'",
|
||||
"limit_to_extruder": "infill_extruder_nr",
|
||||
"settable_per_mesh": true
|
||||
},
|
||||
"sub_div_rad_add":
|
||||
{
|
||||
"label": "Cubic Subdivision Shell",
|
||||
|
|
@ -1441,8 +1428,8 @@
|
|||
"default_value": 0,
|
||||
"type": "int",
|
||||
"minimum_value": "0",
|
||||
"maximum_value_warning": "4",
|
||||
"maximum_value": "(20 - math.log(infill_line_distance) / math.log(2)) if infill_line_distance > 0 and not spaghetti_infill_enabled else 0",
|
||||
"maximum_value_warning": "5",
|
||||
"maximum_value": "0 if spaghetti_infill_enabled else (999999 if infill_line_distance == 0 else (20 - math.log(infill_line_distance) / math.log(2)))",
|
||||
"enabled": "infill_sparse_density > 0 and infill_pattern != 'cubicsubdiv' and not spaghetti_infill_enabled",
|
||||
"limit_to_extruder": "infill_extruder_nr",
|
||||
"settable_per_mesh": true
|
||||
|
|
@ -1453,7 +1440,7 @@
|
|||
"description": "The height of infill of a given density before switching to half the density.",
|
||||
"unit": "mm",
|
||||
"type": "float",
|
||||
"default_value": 5.0,
|
||||
"default_value": 1.5,
|
||||
"minimum_value": "0.0001",
|
||||
"minimum_value_warning": "3 * resolveOrValue('layer_height')",
|
||||
"maximum_value_warning": "100",
|
||||
|
|
@ -1493,8 +1480,8 @@
|
|||
{
|
||||
"expand_upper_skins":
|
||||
{
|
||||
"label": "Expand Upper Skins",
|
||||
"description": "Expand upper skin areas (areas with air above) so that they support infill above.",
|
||||
"label": "Expand Top Skins Into Infill",
|
||||
"description": "Expand the top skin areas (areas with air above) so that they support infill above.",
|
||||
"type": "bool",
|
||||
"default_value": false,
|
||||
"value": "expand_skins_into_infill",
|
||||
|
|
@ -1503,8 +1490,8 @@
|
|||
},
|
||||
"expand_lower_skins":
|
||||
{
|
||||
"label": "Expand Lower Skins",
|
||||
"description": "Expand lower skin areas (areas with air below) so that they are anchored by the infill layers above and below.",
|
||||
"label": "Expand Bottom Skins Into Infill",
|
||||
"description": "Expand the bottom skin areas (areas with air below) so that they are anchored by the infill layers above and below.",
|
||||
"type": "bool",
|
||||
"default_value": false,
|
||||
"limit_to_extruder": "top_bottom_extruder_nr",
|
||||
|
|
@ -2562,7 +2549,6 @@
|
|||
"unit": "mm/s",
|
||||
"type": "float",
|
||||
"minimum_value": "0.1",
|
||||
"minimum_value_warning": "5",
|
||||
"maximum_value_warning": "50",
|
||||
"default_value": 20,
|
||||
"enabled": "resolveOrValue('jerk_enabled')",
|
||||
|
|
@ -2576,7 +2562,6 @@
|
|||
"unit": "mm/s",
|
||||
"type": "float",
|
||||
"minimum_value": "0.1",
|
||||
"minimum_value_warning": "5",
|
||||
"maximum_value_warning": "50",
|
||||
"default_value": 20,
|
||||
"value": "jerk_print",
|
||||
|
|
@ -2591,7 +2576,6 @@
|
|||
"unit": "mm/s",
|
||||
"type": "float",
|
||||
"minimum_value": "0.1",
|
||||
"minimum_value_warning": "5",
|
||||
"maximum_value_warning": "50",
|
||||
"default_value": 20,
|
||||
"value": "jerk_print",
|
||||
|
|
@ -2607,7 +2591,6 @@
|
|||
"unit": "mm/s",
|
||||
"type": "float",
|
||||
"minimum_value": "0.1",
|
||||
"minimum_value_warning": "5",
|
||||
"maximum_value_warning": "50",
|
||||
"default_value": 20,
|
||||
"value": "jerk_wall",
|
||||
|
|
@ -2622,7 +2605,6 @@
|
|||
"unit": "mm/s",
|
||||
"type": "float",
|
||||
"minimum_value": "0.1",
|
||||
"minimum_value_warning": "5",
|
||||
"maximum_value_warning": "50",
|
||||
"default_value": 20,
|
||||
"value": "jerk_wall",
|
||||
|
|
@ -2639,7 +2621,6 @@
|
|||
"unit": "mm/s",
|
||||
"type": "float",
|
||||
"minimum_value": "0.1",
|
||||
"minimum_value_warning": "5",
|
||||
"maximum_value_warning": "50",
|
||||
"default_value": 20,
|
||||
"value": "jerk_print",
|
||||
|
|
@ -2654,7 +2635,6 @@
|
|||
"unit": "mm/s",
|
||||
"type": "float",
|
||||
"minimum_value": "0.1",
|
||||
"minimum_value_warning": "5",
|
||||
"maximum_value_warning": "50",
|
||||
"default_value": 20,
|
||||
"value": "jerk_print",
|
||||
|
|
@ -2673,7 +2653,6 @@
|
|||
"default_value": 20,
|
||||
"value": "jerk_support",
|
||||
"minimum_value": "0.1",
|
||||
"minimum_value_warning": "5",
|
||||
"maximum_value_warning": "50",
|
||||
"enabled": "resolveOrValue('jerk_enabled') and support_enable",
|
||||
"limit_to_extruder": "support_infill_extruder_nr",
|
||||
|
|
@ -2689,7 +2668,6 @@
|
|||
"default_value": 20,
|
||||
"value": "jerk_support",
|
||||
"minimum_value": "0.1",
|
||||
"minimum_value_warning": "5",
|
||||
"maximum_value_warning": "50",
|
||||
"enabled": "resolveOrValue('jerk_enabled') and extruderValue(support_interface_extruder_nr, 'support_interface_enable') and support_enable",
|
||||
"limit_to_extruder": "support_interface_extruder_nr",
|
||||
|
|
@ -2706,7 +2684,6 @@
|
|||
"default_value": 20,
|
||||
"value": "jerk_support_interface",
|
||||
"minimum_value": "0.1",
|
||||
"minimum_value_warning": "5",
|
||||
"maximum_value_warning": "50",
|
||||
"enabled": "resolveOrValue('jerk_enabled') and extruderValue(support_roof_extruder_nr, 'support_roof_enable') and support_enable",
|
||||
"limit_to_extruder": "support_roof_extruder_nr",
|
||||
|
|
@ -2722,7 +2699,6 @@
|
|||
"default_value": 20,
|
||||
"value": "jerk_support_interface",
|
||||
"minimum_value": "0.1",
|
||||
"minimum_value_warning": "5",
|
||||
"maximum_value_warning": "50",
|
||||
"enabled": "resolveOrValue('jerk_enabled') and extruderValue(support_bottom_extruder_nr, 'support_bottom_enable') and support_enable",
|
||||
"limit_to_extruder": "support_bottom_extruder_nr",
|
||||
|
|
@ -2740,7 +2716,6 @@
|
|||
"unit": "mm/s",
|
||||
"type": "float",
|
||||
"minimum_value": "0.1",
|
||||
"minimum_value_warning": "5",
|
||||
"maximum_value_warning": "50",
|
||||
"default_value": 20,
|
||||
"value": "jerk_print",
|
||||
|
|
@ -2757,7 +2732,6 @@
|
|||
"type": "float",
|
||||
"default_value": 30,
|
||||
"minimum_value": "0.1",
|
||||
"minimum_value_warning": "5",
|
||||
"maximum_value_warning": "50",
|
||||
"value": "jerk_print if magic_spiralize else 30",
|
||||
"enabled": "resolveOrValue('jerk_enabled')",
|
||||
|
|
@ -2772,7 +2746,6 @@
|
|||
"default_value": 20,
|
||||
"value": "jerk_print",
|
||||
"minimum_value": "0.1",
|
||||
"minimum_value_warning": "5",
|
||||
"maximum_value_warning": "50",
|
||||
"enabled": "resolveOrValue('jerk_enabled')",
|
||||
"settable_per_mesh": true,
|
||||
|
|
@ -2787,7 +2760,6 @@
|
|||
"default_value": 20,
|
||||
"value": "jerk_layer_0",
|
||||
"minimum_value": "0.1",
|
||||
"minimum_value_warning": "5",
|
||||
"maximum_value_warning": "50",
|
||||
"enabled": "resolveOrValue('jerk_enabled')",
|
||||
"settable_per_mesh": true
|
||||
|
|
@ -2801,7 +2773,6 @@
|
|||
"default_value": 20,
|
||||
"value": "jerk_layer_0 * jerk_travel / jerk_print",
|
||||
"minimum_value": "0.1",
|
||||
"minimum_value_warning": "5",
|
||||
"maximum_value_warning": "50",
|
||||
"enabled": "resolveOrValue('jerk_enabled')",
|
||||
"settable_per_extruder": true,
|
||||
|
|
@ -2817,7 +2788,6 @@
|
|||
"type": "float",
|
||||
"default_value": 20,
|
||||
"minimum_value": "0.1",
|
||||
"minimum_value_warning": "5",
|
||||
"maximum_value_warning": "50",
|
||||
"value": "jerk_layer_0",
|
||||
"enabled": "resolveOrValue('jerk_enabled')",
|
||||
|
|
@ -3121,8 +3091,8 @@
|
|||
{
|
||||
"support_enable":
|
||||
{
|
||||
"label": "Enable Support",
|
||||
"description": "Enable support structures. These structures support parts of the model with severe overhangs.",
|
||||
"label": "Generate Support",
|
||||
"description": "Generate structures to support parts of the model which have overhangs. Without these structures, such parts would collapse during printing.",
|
||||
"type": "bool",
|
||||
"default_value": false,
|
||||
"settable_per_mesh": true,
|
||||
|
|
@ -3380,7 +3350,7 @@
|
|||
"support_bottom_stair_step_height":
|
||||
{
|
||||
"label": "Support Stair Step Height",
|
||||
"description": "The height of the steps of the stair-like bottom of support resting on the model. A low value makes the support harder to remove, but too high values can lead to unstable support structures.",
|
||||
"description": "The height of the steps of the stair-like bottom of support resting on the model. A low value makes the support harder to remove, but too high values can lead to unstable support structures. Set to zero to turn off the stair-like behaviour.",
|
||||
"unit": "mm",
|
||||
"type": "float",
|
||||
"default_value": 0.3,
|
||||
|
|
@ -3390,6 +3360,19 @@
|
|||
"enabled": "support_enable",
|
||||
"settable_per_mesh": true
|
||||
},
|
||||
"support_bottom_stair_step_width":
|
||||
{
|
||||
"label": "Support Stair Step Maximum Width",
|
||||
"description": "The maximum width of the steps of the stair-like bottom of support resting on the model. A low value makes the support harder to remove, but too high values can lead to unstable support structures.",
|
||||
"unit": "mm",
|
||||
"type": "float",
|
||||
"default_value": 5.0,
|
||||
"limit_to_extruder": "support_interface_extruder_nr if support_interface_enable else support_infill_extruder_nr",
|
||||
"minimum_value": "0",
|
||||
"maximum_value_warning": "10.0",
|
||||
"enabled": "support_enable",
|
||||
"settable_per_mesh": true
|
||||
},
|
||||
"support_join_distance":
|
||||
{
|
||||
"label": "Support Join Distance",
|
||||
|
|
@ -3459,7 +3442,7 @@
|
|||
"type": "float",
|
||||
"default_value": 1,
|
||||
"minimum_value": "0",
|
||||
"minimum_value_warning": "3 * resolveOrValue('layer_height')",
|
||||
"minimum_value_warning": "0.2 + resolveOrValue('layer_height')",
|
||||
"maximum_value_warning": "10",
|
||||
"limit_to_extruder": "support_interface_extruder_nr",
|
||||
"enabled": "extruderValue(support_interface_extruder_nr, 'support_interface_enable') and support_enable",
|
||||
|
|
@ -3474,7 +3457,7 @@
|
|||
"type": "float",
|
||||
"default_value": 1,
|
||||
"minimum_value": "0",
|
||||
"minimum_value_warning": "3 * resolveOrValue('layer_height')",
|
||||
"minimum_value_warning": "0.2 + resolveOrValue('layer_height')",
|
||||
"maximum_value_warning": "10",
|
||||
"value": "extruderValue(support_roof_extruder_nr, 'support_interface_height')",
|
||||
"limit_to_extruder": "support_roof_extruder_nr",
|
||||
|
|
@ -3490,7 +3473,7 @@
|
|||
"default_value": 1,
|
||||
"value": "extruderValue(support_bottom_extruder_nr, 'support_interface_height')",
|
||||
"minimum_value": "0",
|
||||
"minimum_value_warning": "min(3 * resolveOrValue('layer_height'), extruderValue(support_bottom_extruder_nr, 'support_bottom_stair_step_height'))",
|
||||
"minimum_value_warning": "min(0.2 + resolveOrValue('layer_height'), extruderValue(support_bottom_extruder_nr, 'support_bottom_stair_step_height'))",
|
||||
"maximum_value_warning": "10",
|
||||
"limit_to_extruder": "support_bottom_extruder_nr",
|
||||
"enabled": "extruderValue(support_bottom_extruder_nr, 'support_bottom_enable') and support_enable",
|
||||
|
|
@ -3718,6 +3701,17 @@
|
|||
"description": "Adhesion",
|
||||
"children":
|
||||
{
|
||||
"prime_blob_enable":
|
||||
{
|
||||
"label": "Enable Prime Blob",
|
||||
"description": "Whether to prime the filament with a blob before printing. Turning this setting on will ensure that the extruder will have material ready at the nozzle before printing. Printing Brim or Skirt can act like priming too, in which case turning this setting off saves some time.",
|
||||
"type": "bool",
|
||||
"resolve": "any(extruderValues('prime_blob_enable'))",
|
||||
"default_value": true,
|
||||
"settable_per_mesh": false,
|
||||
"settable_per_extruder": true,
|
||||
"enabled": false
|
||||
},
|
||||
"extruder_prime_pos_x":
|
||||
{
|
||||
"label": "Extruder Prime X Position",
|
||||
|
|
@ -3757,7 +3751,7 @@
|
|||
"none": "None"
|
||||
},
|
||||
"default_value": "brim",
|
||||
"resolve": "'raft' if 'raft' in extruderValues('adhesion_type') else ('brim' if 'brim' in extruderValues('adhesion_type') else 'skirt')",
|
||||
"resolve": "extruderValue(adhesion_extruder_nr, 'adhesion_type')",
|
||||
"settable_per_mesh": false,
|
||||
"settable_per_extruder": false
|
||||
},
|
||||
|
|
@ -3968,7 +3962,7 @@
|
|||
"value": "resolveOrValue('layer_height') * 1.5",
|
||||
"minimum_value": "0.001",
|
||||
"minimum_value_warning": "0.04",
|
||||
"maximum_value_warning": "0.75 * extruderValue(adhesion_extruder_nr, 'raft_interface_line_width')",
|
||||
"maximum_value_warning": "0.75 * extruderValue(adhesion_extruder_nr, 'machine_nozzle_size')",
|
||||
"enabled": "resolveOrValue('adhesion_type') == 'raft'",
|
||||
"settable_per_mesh": false,
|
||||
"settable_per_extruder": true,
|
||||
|
|
@ -4337,7 +4331,7 @@
|
|||
"type": "float",
|
||||
"unit": "mm",
|
||||
"enabled": "resolveOrValue('prime_tower_enable')",
|
||||
"default_value": 15,
|
||||
"default_value": 20,
|
||||
"resolve": "max(extruderValues('prime_tower_size'))",
|
||||
"minimum_value": "0",
|
||||
"maximum_value": "min(0.5 * machine_width, 0.5 * machine_depth)",
|
||||
|
|
@ -4370,7 +4364,7 @@
|
|||
"value": "round(max(2 * min(extruderValues('prime_tower_line_width')), 0.5 * (resolveOrValue('prime_tower_size') - math.sqrt(max(0, resolveOrValue('prime_tower_size') ** 2 - max(extruderValues('prime_tower_min_volume')) / resolveOrValue('layer_height'))))), 3)",
|
||||
"resolve": "max(extruderValues('prime_tower_wall_thickness'))",
|
||||
"minimum_value": "0.001",
|
||||
"minimum_value_warning": "2 * min(extruderValues('prime_tower_line_width'))",
|
||||
"minimum_value_warning": "2 * min(extruderValues('prime_tower_line_width')) - 0.0001",
|
||||
"maximum_value_warning": "resolveOrValue('prime_tower_size') / 2",
|
||||
"enabled": "resolveOrValue('prime_tower_enable')",
|
||||
"settable_per_mesh": false,
|
||||
|
|
@ -4595,6 +4589,31 @@
|
|||
"settable_per_meshgroup": false,
|
||||
"settable_globally": false
|
||||
},
|
||||
"infill_mesh_order":
|
||||
{
|
||||
"label": "Infill Mesh Order",
|
||||
"description": "Determines which infill mesh is inside the infill of another infill mesh. An infill mesh with a higher order will modify the infill of infill meshes with lower order and normal meshes.",
|
||||
"default_value": 0,
|
||||
"value": "1 if infill_mesh else 0",
|
||||
"minimum_value_warning": "1",
|
||||
"maximum_value_warning": "50",
|
||||
"type": "int",
|
||||
"settable_per_mesh": true,
|
||||
"settable_per_extruder": false,
|
||||
"settable_per_meshgroup": false,
|
||||
"settable_globally": false
|
||||
},
|
||||
"cutting_mesh":
|
||||
{
|
||||
"label": "Cutting Mesh",
|
||||
"description": "Limit the volume of this mesh to within other meshes. You can use this to make certain areas of one mesh print with different settings and with a whole different extruder.",
|
||||
"type": "bool",
|
||||
"default_value": false,
|
||||
"settable_per_mesh": true,
|
||||
"settable_per_extruder": false,
|
||||
"settable_per_meshgroup": false,
|
||||
"settable_globally": false
|
||||
},
|
||||
"mold_enabled":
|
||||
{
|
||||
"label": "Mold",
|
||||
|
|
@ -4629,20 +4648,6 @@
|
|||
"settable_per_mesh": true,
|
||||
"enabled": "mold_enabled"
|
||||
},
|
||||
"infill_mesh_order":
|
||||
{
|
||||
"label": "Infill Mesh Order",
|
||||
"description": "Determines which infill mesh is inside the infill of another infill mesh. An infill mesh with a higher order will modify the infill of infill meshes with lower order and normal meshes.",
|
||||
"default_value": 0,
|
||||
"value": "1 if infill_mesh else 0",
|
||||
"minimum_value_warning": "1",
|
||||
"maximum_value_warning": "50",
|
||||
"type": "int",
|
||||
"settable_per_mesh": true,
|
||||
"settable_per_extruder": false,
|
||||
"settable_per_meshgroup": false,
|
||||
"settable_globally": false
|
||||
},
|
||||
"support_mesh":
|
||||
{
|
||||
"label": "Support Mesh",
|
||||
|
|
@ -4654,6 +4659,18 @@
|
|||
"settable_per_meshgroup": false,
|
||||
"settable_globally": false
|
||||
},
|
||||
"support_mesh_drop_down":
|
||||
{
|
||||
"label": "Drop Down Support Mesh",
|
||||
"description": "Make support everywhere below the support mesh, so that there's no overhang in the support mesh.",
|
||||
"type": "bool",
|
||||
"default_value": true,
|
||||
"enabled": "support_mesh",
|
||||
"settable_per_mesh": true,
|
||||
"settable_per_extruder": false,
|
||||
"settable_per_meshgroup": false,
|
||||
"settable_globally": false
|
||||
},
|
||||
"anti_overhang_mesh":
|
||||
{
|
||||
"label": "Anti Overhang Mesh",
|
||||
|
|
@ -4682,11 +4699,21 @@
|
|||
"magic_spiralize":
|
||||
{
|
||||
"label": "Spiralize Outer Contour",
|
||||
"description": "Spiralize smooths out the Z move of the outer edge. This will create a steady Z increase over the whole print. This feature turns a solid model into a single walled print with a solid bottom. This feature used to be called Joris in older versions.",
|
||||
"description": "Spiralize smooths out the Z move of the outer edge. This will create a steady Z increase over the whole print. This feature turns a solid model into a single walled print with a solid bottom. This feature should only be enabled when each layer only contains a single part.",
|
||||
"type": "bool",
|
||||
"default_value": false,
|
||||
"settable_per_mesh": false,
|
||||
"settable_per_extruder": false
|
||||
},
|
||||
"smooth_spiralized_contours":
|
||||
{
|
||||
"label": "Smooth Spiralized Contours",
|
||||
"description": "Smooth the spiralized contours to reduce the visibility of the Z seam (the Z-seam should be barely visible on the print but will still be visible in the layer view). Note that smoothing will tend to blur fine surface details.",
|
||||
"type": "bool",
|
||||
"default_value": true,
|
||||
"enabled": "magic_spiralize",
|
||||
"settable_per_mesh": false,
|
||||
"settable_per_extruder": false
|
||||
}
|
||||
}
|
||||
},
|
||||
|
|
|
|||
|
|
@ -32,7 +32,7 @@
|
|||
"machine_center_is_zero": { "default_value": false },
|
||||
"machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
|
||||
"machine_start_gcode": {
|
||||
"default_value": ";---------------------------------------\n; ; ; Jellybox Start Script Begin ; ; ;\n;_______________________________________\n; M92 E140 ;optionally adjust steps per mm for your filament\n\n; Print Settings Summary\n; (leave these alone: this is only a list of the slicing settings)\n; (overwriting these values will NOT change your printer's behavior)\n; sliced for : {machine_name}\n; nozzle diameter : {machine_nozzle_size}\n; filament diameter : {material_diameter}\n; layer height : {layer_height}\n; 1st layer height : {layer_height_0}\n; line width : {line_width}\n; outer wall wipe dist. : {wall_0_wipe_dist}\n; infill line width : {infill_line_width}\n; wall thickness : {wall_thickness}\n; top thickness : {top_thickness}\n; bottom thickness : {bottom_thickness}\n; infill density : {infill_sparse_density}\n; infill pattern : {infill_pattern}\n; print temperature : {material_print_temperature}\n; 1st layer print temp. : {material_print_temperature_layer_0}\n; heated bed temperature : {material_bed_temperature}\n; 1st layer bed temp. : {material_bed_temperature_layer_0}\n; regular fan speed : {cool_fan_speed_min}\n; max fan speed : {cool_fan_speed_max}\n; retraction amount : {retraction_amount}\n; retr. retract speed : {retraction_retract_speed}\n; retr. prime speed : {retraction_prime_speed}\n; build plate adhesion : {adhesion_type}\n; support ? {support_enable}\n; spiralized ? {magic_spiralize}\n\nM117 Preparing ;write Preparing\nM140 S{material_bed_temperature_layer_0} ;set bed temperature and move on\nM104 S{material_print_temperature_layer_0} ;set extruder temperature and move on\nM206 X10.0 Y0.0 ;set x homing offset for default bed leveling\nG21 ;metric values\nG90 ;absolute positioning\nM107 ;start with the fan off\nM82 ;set extruder to absolute mode\nG28 ;home all axes\nM203 Z4 ;slow Z speed down for greater accuracy when probing\nG29 ;auto bed leveling procedure\nM203 Z7 ;pick up z speed again for printing\nM190 S{material_bed_temperature_layer_0} ;wait for the bed to reach desired temperature\nM109 S{material_print_temperature_layer_0} ;wait for the extruder to reach desired temperature\nG92 E0 ;reset the extruder position\nG1 F1500 E15 ;extrude 15mm of feed stock\nG92 E0 ;reset the extruder position again\nM117 Print starting ;write Print starting\n;---------------------------------------------\n; ; ; Jellybox Printer Start Script End ; ; ;\n;_____________________________________________\n"
|
||||
"default_value": ";---------------------------------------\n; ; ; Jellybox Start Script Begin ; ; ;\n;_______________________________________\n; M92 E140 ;optionally adjust steps per mm for your filament\n\n; Print Settings Summary\n; (leave these alone: this is only a list of the slicing settings)\n; (overwriting these values will NOT change your printer's behavior)\n; sliced for : {machine_name}\n; nozzle diameter : {machine_nozzle_size}\n; filament diameter : {material_diameter}\n; layer height : {layer_height}\n; 1st layer height : {layer_height_0}\n; line width : {line_width}\n; outer wall wipe dist. : {wall_0_wipe_dist}\n; infill line width : {infill_line_width}\n; wall thickness : {wall_thickness}\n; top thickness : {top_thickness}\n; bottom thickness : {bottom_thickness}\n; infill density : {infill_sparse_density}\n; infill pattern : {infill_pattern}\n; print temperature : {material_print_temperature}\n; 1st layer print temp. : {material_print_temperature_layer_0}\n; heated bed temperature : {material_bed_temperature}\n; 1st layer bed temp. : {material_bed_temperature_layer_0}\n; regular fan speed : {cool_fan_speed_min}\n; max fan speed : {cool_fan_speed_max}\n; retraction amount : {retraction_amount}\n; retr. retract speed : {retraction_retract_speed}\n; retr. prime speed : {retraction_prime_speed}\n; build plate adhesion : {adhesion_type}\n; support ? {support_enable}\n; spiralized ? {magic_spiralize}\n\nM117 Preparing ;write Preparing\nM140 S{material_bed_temperature_layer_0} ;set bed temperature and move on\nM109 S{material_print_temperature} ; wait for the extruder to reach desired temperature\nM206 X10.0 Y0.0 ;set x homing offset for default bed leveling\nG21 ;metric values\nG90 ;absolute positioning\nM107 ;start with the fan off\nM82 ;set extruder to absolute mode\nG28 ;home all axes\nM203 Z4 ;slow Z speed down for greater accuracy when probing\nG29 ;auto bed leveling procedure\nM203 Z7 ;pick up z speed again for printing\nM190 S{material_bed_temperature_layer_0} ;wait for the bed to reach desired temperature\nM109 S{material_print_temperature_layer_0} ;wait for the extruder to reach desired temperature\nG92 E0 ;reset the extruder position\nG1 F1500 E15 ;extrude 15mm of feed stock\nG92 E0 ;reset the extruder position again\nM117 Print starting ;write Print starting\n;---------------------------------------------\n; ; ; Jellybox Printer Start Script End ; ; ;\n;_____________________________________________\n"
|
||||
},
|
||||
"machine_end_gcode": {
|
||||
"default_value": "\n;---------------------------------\n;;; Jellybox End Script Begin ;;;\n;_________________________________\nM117 Finishing Up ;write Finishing Up\n\nM104 S0 ;extruder heater off\nM140 S0 ;bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG90 ;absolute positioning\nG28 X ;home x, so the head is out of the way\nG1 Y100 ;move Y forward, so the print is more accessible\nM84 ;steppers off\n\nM117 Print finished ;write Print finished\n;---------------------------------------\n;;; Jellybox End Script End ;;;\n;_______________________________________"
|
||||
|
|
|
|||
|
|
@ -44,12 +44,6 @@
|
|||
"gantry_height": {
|
||||
"default_value": 82.3
|
||||
},
|
||||
"machine_nozzle_offset_x": {
|
||||
"default_value": 0
|
||||
},
|
||||
"machine_nozzle_offset_y": {
|
||||
"default_value": 15
|
||||
},
|
||||
"machine_gcode_flavor": {
|
||||
"default_value": "RepRap (Marlin/Sprinter)"
|
||||
},
|
||||
|
|
|
|||
70
resources/definitions/makeR_pegasus.def.json
Normal file
70
resources/definitions/makeR_pegasus.def.json
Normal file
|
|
@ -0,0 +1,70 @@
|
|||
{
|
||||
"id": "makeR_pegasus",
|
||||
"version": 2,
|
||||
"name": "makeR Pegasus",
|
||||
"inherits": "fdmprinter",
|
||||
"metadata": {
|
||||
"visible": true,
|
||||
"author": "makeR",
|
||||
"manufacturer": "makeR",
|
||||
"category": "Other",
|
||||
"file_formats": "text/x-gcode",
|
||||
"icon": "icon_ultimaker2",
|
||||
"platform": "makeR_pegasus_platform.stl",
|
||||
"platform_offset": [-200,-10,200]
|
||||
},
|
||||
|
||||
"overrides": {
|
||||
"machine_name": { "default_value": " makeR Pegasus" },
|
||||
"machine_heated_bed": {
|
||||
"default_value": true
|
||||
},
|
||||
"machine_width": {
|
||||
"default_value": 400
|
||||
},
|
||||
"machine_height": {
|
||||
"default_value": 400
|
||||
},
|
||||
"machine_depth": {
|
||||
"default_value": 400
|
||||
},
|
||||
"machine_center_is_zero": {
|
||||
"default_value": false
|
||||
},
|
||||
"machine_nozzle_size": {
|
||||
"default_value": 0.4
|
||||
},
|
||||
"material_diameter": {
|
||||
"default_value": 2.85
|
||||
},
|
||||
"machine_nozzle_heat_up_speed": {
|
||||
"default_value": 2
|
||||
},
|
||||
"machine_nozzle_cool_down_speed": {
|
||||
"default_value": 2
|
||||
},
|
||||
"machine_head_polygon": {
|
||||
"default_value": [
|
||||
[-75, -18],
|
||||
[-75, 35],
|
||||
[18, 35],
|
||||
[18, -18]
|
||||
]
|
||||
},
|
||||
"gantry_height": {
|
||||
"default_value": -25
|
||||
},
|
||||
"machine_platform_offset":{
|
||||
"default_value":-25
|
||||
},
|
||||
"machine_gcode_flavor": {
|
||||
"default_value": "RepRap (Marlin/Sprinter)"
|
||||
},
|
||||
"machine_start_gcode": {
|
||||
"default_value": "G1 Z15;\nG28;Home\nG29;Auto Level\nG1 Z5 F5000;Move the platform down 15mm"
|
||||
},
|
||||
"machine_end_gcode": {
|
||||
"default_value": "M104 S0;Turn off temperature\nG28 X0; Home X\nM84; Disable Motors"
|
||||
}
|
||||
}
|
||||
}
|
||||
67
resources/definitions/makeR_prusa_tairona_i3.def.json
Normal file
67
resources/definitions/makeR_prusa_tairona_i3.def.json
Normal file
|
|
@ -0,0 +1,67 @@
|
|||
{
|
||||
"id": "makeR_prusa_tairona_i3",
|
||||
"version": 2,
|
||||
"name": "makeR Prusa Tairona i3",
|
||||
"inherits": "fdmprinter",
|
||||
"metadata": {
|
||||
"visible": true,
|
||||
"author": "makeR",
|
||||
"manufacturer": "makeR",
|
||||
"category": "Other",
|
||||
"file_formats": "text/x-gcode",
|
||||
"icon": "icon_ultimaker2",
|
||||
"platform": "makeR_prusa_tairona_i3_platform.stl",
|
||||
"platform_offset": [-2,0,0]
|
||||
},
|
||||
|
||||
"overrides": {
|
||||
"machine_name": { "default_value": "makeR Prusa Tairona I3" },
|
||||
"machine_heated_bed": {
|
||||
"default_value": true
|
||||
},
|
||||
"machine_width": {
|
||||
"default_value": 200
|
||||
},
|
||||
"machine_height": {
|
||||
"default_value": 200
|
||||
},
|
||||
"machine_depth": {
|
||||
"default_value": 200
|
||||
},
|
||||
"machine_center_is_zero": {
|
||||
"default_value": false
|
||||
},
|
||||
"machine_nozzle_size": {
|
||||
"default_value": 0.4
|
||||
},
|
||||
"material_diameter": {
|
||||
"default_value": 1.75
|
||||
},
|
||||
"machine_nozzle_heat_up_speed": {
|
||||
"default_value": 2
|
||||
},
|
||||
"machine_nozzle_cool_down_speed": {
|
||||
"default_value": 2
|
||||
},
|
||||
"machine_head_polygon": {
|
||||
"default_value": [
|
||||
[-75, -18],
|
||||
[-75, 35],
|
||||
[18, 35],
|
||||
[18, -18]
|
||||
]
|
||||
},
|
||||
"gantry_height": {
|
||||
"default_value": 55
|
||||
},
|
||||
"machine_gcode_flavor": {
|
||||
"default_value": "RepRap (Marlin/Sprinter)"
|
||||
},
|
||||
"machine_start_gcode": {
|
||||
"default_value": "G1 Z15;\nG28;Home\nG29;Auto Level\nG1 Z5 F5000;Move the platform down 15mm"
|
||||
},
|
||||
"machine_end_gcode": {
|
||||
"default_value": "M104 S0;Turn off temperature\nG28 X0; Home X\nM84; Disable Motors"
|
||||
}
|
||||
}
|
||||
}
|
||||
|
|
@ -4,6 +4,7 @@
|
|||
"name": "3DMaker Starter",
|
||||
"inherits": "fdmprinter",
|
||||
"metadata": {
|
||||
"visible": true,
|
||||
"author": "tvlgiao",
|
||||
"manufacturer": "3DMaker",
|
||||
"category": "Other",
|
||||
|
|
|
|||
162
resources/definitions/peopoly_moai.def.json
Normal file
162
resources/definitions/peopoly_moai.def.json
Normal file
|
|
@ -0,0 +1,162 @@
|
|||
{
|
||||
"id": "peopoly_moai",
|
||||
"version": 2,
|
||||
"name": "Peopoly Moai",
|
||||
"inherits": "fdmprinter",
|
||||
"metadata": {
|
||||
"visible": true,
|
||||
"author": "fieldOfView",
|
||||
"manufacturer": "Peopoly",
|
||||
"category": "Other",
|
||||
"file_formats": "text/x-gcode",
|
||||
"has_machine_quality": true,
|
||||
"has_materials": false
|
||||
},
|
||||
|
||||
"overrides": {
|
||||
"machine_name": {
|
||||
"default_value": "Moai"
|
||||
},
|
||||
"machine_width": {
|
||||
"default_value": 130
|
||||
},
|
||||
"machine_height": {
|
||||
"default_value": 180
|
||||
},
|
||||
"machine_depth": {
|
||||
"default_value": 130
|
||||
},
|
||||
"machine_nozzle_size": {
|
||||
"default_value": 0.067
|
||||
},
|
||||
"machine_head_with_fans_polygon":
|
||||
{
|
||||
"default_value": [
|
||||
[ -20, 10 ],
|
||||
[ -20, -10 ],
|
||||
[ 10, 10 ],
|
||||
[ 10, -10 ]
|
||||
]
|
||||
},
|
||||
"machine_gcode_flavor": {
|
||||
"default_value": "RepRap (Marlin/Sprinter)"
|
||||
},
|
||||
"machine_start_gcode": {
|
||||
"default_value": "G28 ;Home"
|
||||
},
|
||||
"machine_end_gcode": {
|
||||
"default_value": "M104 S0\nM140 S0\nG28 X0 Y0\nM84"
|
||||
},
|
||||
|
||||
"line_width": {
|
||||
"minimum_value_warning": "machine_nozzle_size"
|
||||
},
|
||||
"wall_line_width": {
|
||||
"minimum_value_warning": "machine_nozzle_size"
|
||||
},
|
||||
"wall_line_width_x": {
|
||||
"minimum_value_warning": "machine_nozzle_size"
|
||||
},
|
||||
"skin_line_width": {
|
||||
"minimum_value_warning": "machine_nozzle_size"
|
||||
},
|
||||
"infill_line_width": {
|
||||
"minimum_value_warning": "machine_nozzle_size"
|
||||
},
|
||||
"skirt_brim_line_width": {
|
||||
"minimum_value_warning": "machine_nozzle_size"
|
||||
},
|
||||
"layer_height": {
|
||||
"maximum_value_warning": "0.5",
|
||||
"minimum_value_warning": "0.02"
|
||||
},
|
||||
"layer_height_0": {
|
||||
"maximum_value_warning": "0.5",
|
||||
"minimum_value_warning": "0.02",
|
||||
"value": "0.1"
|
||||
},
|
||||
"top_bottom_thickness": {
|
||||
"minimum_value_warning": "0.1"
|
||||
},
|
||||
"infill_sparse_thickness": {
|
||||
"maximum_value_warning": "0.5"
|
||||
},
|
||||
"speed_print": {
|
||||
"maximum_value_warning": "300"
|
||||
},
|
||||
"speed_infill": {
|
||||
"maximum_value_warning": "300"
|
||||
},
|
||||
"speed_wall": {
|
||||
"maximum_value_warning": "300",
|
||||
"value": "speed_print"
|
||||
},
|
||||
"speed_wall_0": {
|
||||
"maximum_value_warning": "300"
|
||||
},
|
||||
"speed_wall_x": {
|
||||
"maximum_value_warning": "300",
|
||||
"value": "speed_print"
|
||||
},
|
||||
"speed_topbottom": {
|
||||
"maximum_value_warning": "300",
|
||||
"value": "speed_print"
|
||||
},
|
||||
"speed_travel": {
|
||||
"value": "300"
|
||||
},
|
||||
"speed_travel_layer_0": {
|
||||
"value": "300"
|
||||
},
|
||||
"speed_layer_0": {
|
||||
"value": "5"
|
||||
},
|
||||
"speed_slowdown_layers": {
|
||||
"value": "2"
|
||||
},
|
||||
|
||||
"acceleration_enabled": {
|
||||
"value": "False"
|
||||
},
|
||||
"print_sequence": {
|
||||
"enabled": false
|
||||
},
|
||||
"support_enable": {
|
||||
"enabled": false
|
||||
},
|
||||
"machine_nozzle_temp_enabled": {
|
||||
"value": "False"
|
||||
},
|
||||
"material_bed_temperature": {
|
||||
"enabled": false
|
||||
},
|
||||
"material_diameter": {
|
||||
"enabled": false,
|
||||
"value": "1.75"
|
||||
},
|
||||
"cool_fan_enabled": {
|
||||
"enabled": false,
|
||||
"value": "False"
|
||||
},
|
||||
"retraction_enable": {
|
||||
"enabled": false,
|
||||
"value": "False"
|
||||
},
|
||||
"retraction_combing": {
|
||||
"enabled": false,
|
||||
"value": "'off'"
|
||||
},
|
||||
"retract_at_layer_change": {
|
||||
"enabled": false
|
||||
},
|
||||
"cool_min_layer_time_fan_speed_max": {
|
||||
"enabled": false
|
||||
},
|
||||
"cool_fan_full_at_height": {
|
||||
"enabled": false
|
||||
},
|
||||
"cool_fan_full_layer": {
|
||||
"enabled": false
|
||||
}
|
||||
}
|
||||
}
|
||||
130
resources/definitions/rigid3d_zero2.def.json
Normal file
130
resources/definitions/rigid3d_zero2.def.json
Normal file
|
|
@ -0,0 +1,130 @@
|
|||
{
|
||||
"id": "rigid3d_zero2",
|
||||
"name": "Rigid3D Zero2",
|
||||
"version": 2,
|
||||
"inherits": "fdmprinter",
|
||||
"metadata": {
|
||||
"visible": true,
|
||||
"author": "Rigid3D",
|
||||
"manufacturer": "Rigid3D",
|
||||
"category": "Other",
|
||||
"has_materials": false,
|
||||
"file_formats": "text/x-gcode",
|
||||
"platform": "rigid3d_zero2_platform.stl",
|
||||
"platform_offset": [ 5, 0, -35]
|
||||
},
|
||||
"overrides": {
|
||||
"machine_name": { "default_value": "Rigid3D Zero2" },
|
||||
"machine_head_with_fans_polygon": {
|
||||
"default_value": [[ 30, 30], [ 30, 70], [ 30, 70], [ 30, 30]]
|
||||
},
|
||||
"z_seam_type": {
|
||||
"default_value": "random"
|
||||
},
|
||||
"machine_heated_bed": {
|
||||
"default_value": true
|
||||
},
|
||||
"layer_height": {
|
||||
"default_value": 0.2
|
||||
},
|
||||
"layer_height_0": {
|
||||
"default_value": 0.2
|
||||
},
|
||||
"wall_thickness": {
|
||||
"default_value": 0.8
|
||||
},
|
||||
"top_bottom_thickness": {
|
||||
"default_value": 0.8
|
||||
},
|
||||
"xy_offset": {
|
||||
"default_value": -0.2
|
||||
},
|
||||
"material_print_temperature": {
|
||||
"value": 235
|
||||
},
|
||||
"material_bed_temperature": {
|
||||
"default_value": 100
|
||||
},
|
||||
"material_diameter": {
|
||||
"default_value": 1.75
|
||||
},
|
||||
"speed_print": {
|
||||
"default_value": 40
|
||||
},
|
||||
"speed_layer_0": {
|
||||
"value": 15
|
||||
},
|
||||
"speed_travel": {
|
||||
"value": 100
|
||||
},
|
||||
"support_enable": {
|
||||
"default_value": false
|
||||
},
|
||||
"infill_sparse_density": {
|
||||
"default_value": 15
|
||||
},
|
||||
"infill_pattern": {
|
||||
"default_value": "lines",
|
||||
"value": "lines"
|
||||
},
|
||||
"retraction_amount": {
|
||||
"default_value": 1
|
||||
},
|
||||
"machine_width": {
|
||||
"default_value": 200
|
||||
},
|
||||
"machine_height": {
|
||||
"default_value": 200
|
||||
},
|
||||
"machine_depth": {
|
||||
"default_value": 200
|
||||
},
|
||||
"machine_center_is_zero": {
|
||||
"default_value": false
|
||||
},
|
||||
"machine_nozzle_size": {
|
||||
"default_value": 0.4
|
||||
},
|
||||
"gantry_height": {
|
||||
"default_value": 25
|
||||
},
|
||||
"machine_gcode_flavor": {
|
||||
"default_value": "RepRap"
|
||||
},
|
||||
"cool_fan_enabled": {
|
||||
"default_value": false
|
||||
},
|
||||
"cool_fan_speed": {
|
||||
"default_value": 50,
|
||||
"value": 50
|
||||
},
|
||||
"cool_fan_speed_min": {
|
||||
"default_value": 0
|
||||
},
|
||||
"cool_fan_full_at_height": {
|
||||
"default_value": 1.0,
|
||||
"value": 1.0
|
||||
},
|
||||
"support_z_distance": {
|
||||
"default_value": 0.2
|
||||
},
|
||||
"support_interface_enable": {
|
||||
"default_value": true
|
||||
},
|
||||
"support_interface_height": {
|
||||
"default_value": 0.8
|
||||
},
|
||||
"support_interface_density": {
|
||||
"default_value": 70
|
||||
},
|
||||
"support_interface_pattern": {
|
||||
"default_value": "grid"
|
||||
},
|
||||
"machine_start_gcode": {
|
||||
"default_value": "G21\nG28 ; Home extruder\nM107 ; Turn off fan\nG91 ; Relative positioning\nG1 Z5 F180;\nG1 X100 Y100 F3000;\nG1 Z-5 F180;\nG90 ; Absolute positioning\nM82 ; Extruder in absolute mode\nG92 E0 ; Reset extruder position\n"
|
||||
},
|
||||
"machine_end_gcode": {
|
||||
"default_value": "G1 X0 Y180 ; Get extruder out of way.\nM107 ; Turn off fan\nG91 ; Relative positioning\nG0 Z20 ; Lift extruder up\nT0\nG1 E-1 ; Reduce filament pressure\nM104 T0 S0 ; Turn extruder heater off\nG90 ; Absolute positioning\nG92 E0 ; Reset extruder position\nM140 S0 ; Disable heated bed\nM84 ; Turn steppers off\n"
|
||||
}
|
||||
}
|
||||
}
|
||||
|
|
@ -15,7 +15,8 @@
|
|||
"platform_texture": "Ultimaker2backplate.png",
|
||||
"platform_offset": [9, 0, 0],
|
||||
"has_materials": false,
|
||||
"supported_actions":["UpgradeFirmware"]
|
||||
"first_start_actions": ["UM2UpgradeSelection"],
|
||||
"supported_actions":["UM2UpgradeSelection", "UpgradeFirmware"]
|
||||
},
|
||||
"overrides": {
|
||||
"machine_name": { "default_value": "Ultimaker 2" },
|
||||
|
|
|
|||
|
|
@ -11,8 +11,7 @@
|
|||
"file_formats": "text/x-gcode",
|
||||
"icon": "icon_ultimaker2.png",
|
||||
"platform": "ultimaker2_platform.obj",
|
||||
"platform_texture": "Ultimaker2Extendedbackplate.png",
|
||||
"supported_actions": ["UpgradeFirmware"]
|
||||
"platform_texture": "Ultimaker2Extendedbackplate.png"
|
||||
},
|
||||
|
||||
"overrides": {
|
||||
|
|
|
|||
|
|
@ -13,6 +13,7 @@
|
|||
"platform": "ultimaker2go_platform.obj",
|
||||
"platform_texture": "Ultimaker2Gobackplate.png",
|
||||
"platform_offset": [0, 0, 0],
|
||||
"first_start_actions": [],
|
||||
"supported_actions":["UpgradeFirmware"]
|
||||
},
|
||||
|
||||
|
|
|
|||
|
|
@ -16,6 +16,7 @@
|
|||
"has_materials": true,
|
||||
"has_machine_materials": true,
|
||||
"has_machine_quality": true,
|
||||
"first_start_actions": [],
|
||||
"supported_actions":["UpgradeFirmware"]
|
||||
},
|
||||
|
||||
|
|
|
|||
|
|
@ -70,9 +70,11 @@
|
|||
"machine_start_gcode": { "default_value": "" },
|
||||
"machine_end_gcode": { "default_value": "" },
|
||||
"prime_tower_position_x": { "default_value": 175 },
|
||||
"prime_tower_position_y": { "default_value": 179 },
|
||||
"prime_tower_position_y": { "default_value": 178 },
|
||||
"prime_tower_wipe_enabled": { "default_value": false },
|
||||
|
||||
"prime_blob_enable": { "enabled": true },
|
||||
|
||||
"acceleration_enabled": { "value": "True" },
|
||||
"acceleration_layer_0": { "value": "acceleration_topbottom" },
|
||||
"acceleration_prime_tower": { "value": "math.ceil(acceleration_print * 2000 / 4000)" },
|
||||
|
|
@ -103,7 +105,7 @@
|
|||
"layer_height_0": { "value": "round(machine_nozzle_size / 1.5, 2)" },
|
||||
"layer_start_x": { "value": "sum(extruderValues('machine_extruder_start_pos_x')) / len(extruderValues('machine_extruder_start_pos_x'))" },
|
||||
"layer_start_y": { "value": "sum(extruderValues('machine_extruder_start_pos_y')) / len(extruderValues('machine_extruder_start_pos_y'))" },
|
||||
"line_width": { "value": "machine_nozzle_size * 0.875" },
|
||||
"line_width": { "value": "round(machine_nozzle_size * 0.875, 3)" },
|
||||
"machine_min_cool_heat_time_window": { "value": "15" },
|
||||
"default_material_print_temperature": { "value": "200" },
|
||||
"material_print_temperature_layer_0": { "value": "material_print_temperature + 5" },
|
||||
|
|
@ -111,7 +113,7 @@
|
|||
"material_bed_temperature_layer_0": { "maximum_value": "115" },
|
||||
"material_standby_temperature": { "value": "100" },
|
||||
"multiple_mesh_overlap": { "value": "0" },
|
||||
"prime_tower_enable": { "value": "True" },
|
||||
"prime_tower_enable": { "default_value": true },
|
||||
"raft_airgap": { "value": "0" },
|
||||
"raft_base_thickness": { "value": "0.3" },
|
||||
"raft_interface_line_spacing": { "value": "0.5" },
|
||||
|
|
|
|||
Loading…
Add table
Add a link
Reference in a new issue