Add S8 legacy core profiles

resources/intent/ultimaker_s8/um_s8_aa0.4_abs_0.06mm_visual.inst.cfg

@@ -0,0 +1,18 @@
+[general]
+definition = ultimaker_s8
+name = Visual
+version = 4
+
+[metadata]
+intent_category = visual
+material = generic_abs
+quality_type = high
+setting_version = 25
+type = intent
+variant = AA 0.4
+
+[values]
+speed_infill = 50
+top_bottom_thickness = 1.05
+z_seam_type = back
+

resources/intent/ultimaker_s8/um_s8_aa0.4_abs_0.15mm_engineering.inst.cfg

@@ -0,0 +1,24 @@
+[general]
+definition = ultimaker_s8
+name = Accurate
+version = 4
+
+[metadata]
+intent_category = engineering
+material = generic_abs
+quality_type = fast
+setting_version = 25
+type = intent
+variant = AA 0.4
+
+[values]
+jerk_print = 6000
+speed_infill = =speed_print
+speed_print = 30
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 3
+

resources/intent/ultimaker_s8/um_s8_aa0.4_abs_0.15mm_visual.inst.cfg

@@ -0,0 +1,18 @@
+[general]
+definition = ultimaker_s8
+name = Visual
+version = 4
+
+[metadata]
+intent_category = visual
+material = generic_abs
+quality_type = fast
+setting_version = 25
+type = intent
+variant = AA 0.4
+
+[values]
+speed_infill = 50
+top_bottom_thickness = 1.05
+z_seam_type = back
+

resources/intent/ultimaker_s8/um_s8_aa0.4_abs_0.1mm_engineering.inst.cfg

@@ -0,0 +1,24 @@
+[general]
+definition = ultimaker_s8
+name = Accurate
+version = 4
+
+[metadata]
+intent_category = engineering
+material = generic_abs
+quality_type = normal
+setting_version = 25
+type = intent
+variant = AA 0.4
+
+[values]
+jerk_print = 6000
+speed_infill = =speed_print
+speed_print = 30
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 3
+

resources/intent/ultimaker_s8/um_s8_aa0.4_abs_0.1mm_visual.inst.cfg

@@ -0,0 +1,18 @@
+[general]
+definition = ultimaker_s8
+name = Visual
+version = 4
+
+[metadata]
+intent_category = visual
+material = generic_abs
+quality_type = normal
+setting_version = 25
+type = intent
+variant = AA 0.4
+
+[values]
+speed_infill = 50
+top_bottom_thickness = 1.05
+z_seam_type = back
+

resources/intent/ultimaker_s8/um_s8_aa0.4_abs_0.2mm_quick.inst.cfg

@@ -0,0 +1,23 @@
+[general]
+definition = ultimaker_s8
+name = Quick
+version = 4
+
+[metadata]
+intent_category = quick
+material = generic_abs
+quality_type = draft
+setting_version = 25
+type = intent
+variant = AA 0.4
+
+[values]
+infill_sparse_density = 15
+jerk_print = 6000
+speed_infill = =speed_print
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = 0.8
+

resources/intent/ultimaker_s8/um_s8_aa0.4_cpe-plus_0.15mm_engineering.inst.cfg

@@ -0,0 +1,24 @@
+[general]
+definition = ultimaker_s8
+name = Accurate
+version = 4
+
+[metadata]
+intent_category = engineering
+material = generic_cpe_plus
+quality_type = fast
+setting_version = 25
+type = intent
+variant = AA 0.4
+
+[values]
+jerk_print = 6000
+speed_infill = =speed_print
+speed_print = 30
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 3
+

resources/intent/ultimaker_s8/um_s8_aa0.4_cpe-plus_0.1mm_engineering.inst.cfg

@@ -0,0 +1,24 @@
+[general]
+definition = ultimaker_s8
+name = Accurate
+version = 4
+
+[metadata]
+intent_category = engineering
+material = generic_cpe_plus
+quality_type = normal
+setting_version = 25
+type = intent
+variant = AA 0.4
+
+[values]
+jerk_print = 6000
+speed_infill = =speed_print
+speed_print = 30
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 3
+

resources/intent/ultimaker_s8/um_s8_aa0.4_cpe_0.15mm_engineering.inst.cfg

@@ -0,0 +1,24 @@
+[general]
+definition = ultimaker_s8
+name = Accurate
+version = 4
+
+[metadata]
+intent_category = engineering
+material = generic_cpe
+quality_type = fast
+setting_version = 25
+type = intent
+variant = AA 0.4
+
+[values]
+jerk_print = 6000
+speed_infill = =speed_print
+speed_print = 30
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 3
+

resources/intent/ultimaker_s8/um_s8_aa0.4_cpe_0.1mm_engineering.inst.cfg

@@ -0,0 +1,24 @@
+[general]
+definition = ultimaker_s8
+name = Accurate
+version = 4
+
+[metadata]
+intent_category = engineering
+material = generic_cpe
+quality_type = normal
+setting_version = 25
+type = intent
+variant = AA 0.4
+
+[values]
+jerk_print = 6000
+speed_infill = =speed_print
+speed_print = 30
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 3
+

resources/intent/ultimaker_s8/um_s8_aa0.4_nylon_0.15mm_engineering.inst.cfg

@@ -0,0 +1,24 @@
+[general]
+definition = ultimaker_s8
+name = Accurate
+version = 4
+
+[metadata]
+intent_category = engineering
+material = generic_nylon
+quality_type = fast
+setting_version = 25
+type = intent
+variant = AA 0.4
+
+[values]
+jerk_print = 6000
+speed_infill = =speed_print
+speed_print = 30
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 3
+

resources/intent/ultimaker_s8/um_s8_aa0.4_nylon_0.1mm_engineering.inst.cfg

@@ -0,0 +1,24 @@
+[general]
+definition = ultimaker_s8
+name = Accurate
+version = 4
+
+[metadata]
+intent_category = engineering
+material = generic_nylon
+quality_type = normal
+setting_version = 25
+type = intent
+variant = AA 0.4
+
+[values]
+jerk_print = 6000
+speed_infill = =speed_print
+speed_print = 30
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 3
+

resources/intent/ultimaker_s8/um_s8_aa0.4_pc_0.15mm_engineering.inst.cfg

@@ -0,0 +1,24 @@
+[general]
+definition = ultimaker_s8
+name = Accurate
+version = 4
+
+[metadata]
+intent_category = engineering
+material = generic_pc
+quality_type = fast
+setting_version = 25
+type = intent
+variant = AA 0.4
+
+[values]
+jerk_print = 6000
+speed_infill = =speed_print
+speed_print = 30
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 3
+

resources/intent/ultimaker_s8/um_s8_aa0.4_pc_0.1mm_engineering.inst.cfg

@@ -0,0 +1,24 @@
+[general]
+definition = ultimaker_s8
+name = Accurate
+version = 4
+
+[metadata]
+intent_category = engineering
+material = generic_pc
+quality_type = normal
+setting_version = 25
+type = intent
+variant = AA 0.4
+
+[values]
+jerk_print = 6000
+speed_infill = =speed_print
+speed_print = 30
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 3
+

resources/intent/ultimaker_s8/um_s8_aa0.4_petg_0.15mm_engineering.inst.cfg

@@ -0,0 +1,24 @@
+[general]
+definition = ultimaker_s8
+name = Accurate
+version = 4
+
+[metadata]
+intent_category = engineering
+material = generic_petg
+quality_type = fast
+setting_version = 25
+type = intent
+variant = AA 0.4
+
+[values]
+jerk_print = 6000
+speed_infill = =speed_print
+speed_print = 30
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 3
+

resources/intent/ultimaker_s8/um_s8_aa0.4_petg_0.1mm_engineering.inst.cfg

@@ -0,0 +1,24 @@
+[general]
+definition = ultimaker_s8
+name = Accurate
+version = 4
+
+[metadata]
+intent_category = engineering
+material = generic_petg
+quality_type = normal
+setting_version = 25
+type = intent
+variant = AA 0.4
+
+[values]
+jerk_print = 6000
+speed_infill = =speed_print
+speed_print = 30
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 3
+

resources/intent/ultimaker_s8/um_s8_aa0.4_pla_0.06mm_visual.inst.cfg

@@ -0,0 +1,18 @@
+[general]
+definition = ultimaker_s8
+name = Visual
+version = 4
+
+[metadata]
+intent_category = visual
+material = generic_pla
+quality_type = high
+setting_version = 25
+type = intent
+variant = AA 0.4
+
+[values]
+speed_infill = 50
+top_bottom_thickness = 1.05
+z_seam_type = back
+

resources/intent/ultimaker_s8/um_s8_aa0.4_pla_0.15mm_engineering.inst.cfg

@@ -0,0 +1,24 @@
+[general]
+definition = ultimaker_s8
+name = Accurate
+version = 4
+
+[metadata]
+intent_category = engineering
+material = generic_pla
+quality_type = fast
+setting_version = 25
+type = intent
+variant = AA 0.4
+
+[values]
+jerk_print = 6000
+speed_infill = =speed_print
+speed_print = 30
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 3
+

resources/intent/ultimaker_s8/um_s8_aa0.4_pla_0.15mm_visual.inst.cfg

@@ -0,0 +1,18 @@
+[general]
+definition = ultimaker_s8
+name = Visual
+version = 4
+
+[metadata]
+intent_category = visual
+material = generic_pla
+quality_type = fast
+setting_version = 25
+type = intent
+variant = AA 0.4
+
+[values]
+speed_infill = 50
+top_bottom_thickness = 1.05
+z_seam_type = back
+

resources/intent/ultimaker_s8/um_s8_aa0.4_pla_0.1mm_engineering.inst.cfg

@@ -0,0 +1,24 @@
+[general]
+definition = ultimaker_s8
+name = Accurate
+version = 4
+
+[metadata]
+intent_category = engineering
+material = generic_pla
+quality_type = normal
+setting_version = 25
+type = intent
+variant = AA 0.4
+
+[values]
+jerk_print = 6000
+speed_infill = =speed_print
+speed_print = 30
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 3
+

resources/intent/ultimaker_s8/um_s8_aa0.4_pla_0.1mm_visual.inst.cfg

@@ -0,0 +1,18 @@
+[general]
+definition = ultimaker_s8
+name = Visual
+version = 4
+
+[metadata]
+intent_category = visual
+material = generic_pla
+quality_type = normal
+setting_version = 25
+type = intent
+variant = AA 0.4
+
+[values]
+speed_infill = 50
+top_bottom_thickness = 1.05
+z_seam_type = back
+

resources/intent/ultimaker_s8/um_s8_aa0.4_pla_0.2mm_quick.inst.cfg

@@ -0,0 +1,23 @@
+[general]
+definition = ultimaker_s8
+name = Quick
+version = 4
+
+[metadata]
+intent_category = quick
+material = generic_pla
+quality_type = draft
+setting_version = 25
+type = intent
+variant = AA 0.4
+
+[values]
+infill_sparse_density = 15
+jerk_print = 6000
+speed_infill = =speed_print
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = 0.8
+

resources/intent/ultimaker_s8/um_s8_aa0.4_pla_0.3mm_quick.inst.cfg

@@ -0,0 +1,28 @@
+[general]
+definition = ultimaker_s8
+name = Quick
+version = 4
+
+[metadata]
+intent_category = quick
+is_experimental = True
+material = generic_pla
+quality_type = verydraft
+setting_version = 25
+type = intent
+variant = AA 0.4
+
+[values]
+acceleration_print = 4000
+acceleration_wall = 2000
+acceleration_wall_0 = 2000
+infill_sparse_density = 10
+jerk_print = 6000
+speed_infill = =speed_print
+speed_print = 50
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = 0.8
+

resources/intent/ultimaker_s8/um_s8_aa0.4_tough-pla_0.06mm_visual.inst.cfg

@@ -0,0 +1,18 @@
+[general]
+definition = ultimaker_s8
+name = Visual
+version = 4
+
+[metadata]
+intent_category = visual
+material = generic_tough_pla
+quality_type = high
+setting_version = 25
+type = intent
+variant = AA 0.4
+
+[values]
+speed_infill = 50
+top_bottom_thickness = 1.05
+z_seam_type = back
+

resources/intent/ultimaker_s8/um_s8_aa0.4_tough-pla_0.15mm_engineering.inst.cfg

@@ -0,0 +1,24 @@
+[general]
+definition = ultimaker_s8
+name = Accurate
+version = 4
+
+[metadata]
+intent_category = engineering
+material = generic_tough_pla
+quality_type = fast
+setting_version = 25
+type = intent
+variant = AA 0.4
+
+[values]
+jerk_print = 6000
+speed_infill = =speed_print
+speed_print = 30
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 3
+

resources/intent/ultimaker_s8/um_s8_aa0.4_tough-pla_0.15mm_visual.inst.cfg

@@ -0,0 +1,18 @@
+[general]
+definition = ultimaker_s8
+name = Visual
+version = 4
+
+[metadata]
+intent_category = visual
+material = generic_tough_pla
+quality_type = fast
+setting_version = 25
+type = intent
+variant = AA 0.4
+
+[values]
+speed_infill = 50
+top_bottom_thickness = 1.05
+z_seam_type = back
+

resources/intent/ultimaker_s8/um_s8_aa0.4_tough-pla_0.1mm_engineering.inst.cfg

@@ -0,0 +1,24 @@
+[general]
+definition = ultimaker_s8
+name = Accurate
+version = 4
+
+[metadata]
+intent_category = engineering
+material = generic_tough_pla
+quality_type = normal
+setting_version = 25
+type = intent
+variant = AA 0.4
+
+[values]
+jerk_print = 6000
+speed_infill = =speed_print
+speed_print = 30
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 3
+

resources/intent/ultimaker_s8/um_s8_aa0.4_tough-pla_0.1mm_visual.inst.cfg

@@ -0,0 +1,18 @@
+[general]
+definition = ultimaker_s8
+name = Visual
+version = 4
+
+[metadata]
+intent_category = visual
+material = generic_tough_pla
+quality_type = normal
+setting_version = 25
+type = intent
+variant = AA 0.4
+
+[values]
+speed_infill = 50
+top_bottom_thickness = 1.05
+z_seam_type = back
+

resources/intent/ultimaker_s8/um_s8_aa0.4_tough-pla_0.2mm_quick.inst.cfg

@@ -0,0 +1,23 @@
+[general]
+definition = ultimaker_s8
+name = Quick
+version = 4
+
+[metadata]
+intent_category = quick
+material = generic_tough_pla
+quality_type = draft
+setting_version = 25
+type = intent
+variant = AA 0.4
+
+[values]
+infill_sparse_density = 15
+jerk_print = 6000
+speed_infill = =speed_print
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = 0.8
+

resources/intent/ultimaker_s8/um_s8_aa0.4_tough-pla_0.3mm_quick.inst.cfg

@@ -0,0 +1,28 @@
+[general]
+definition = ultimaker_s8
+name = Quick
+version = 4
+
+[metadata]
+intent_category = quick
+is_experimental = True
+material = generic_tough_pla
+quality_type = verydraft
+setting_version = 25
+type = intent
+variant = AA 0.4
+
+[values]
+acceleration_print = 4000
+acceleration_wall = 2000
+acceleration_wall_0 = 2000
+infill_sparse_density = 10
+jerk_print = 6000
+speed_infill = =speed_print
+speed_print = 50
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = 0.8
+

resources/intent/ultimaker_s8/um_s8_aa0.4_um-abs_0.06mm_visual.inst.cfg

@@ -0,0 +1,26 @@
+[general]
+definition = ultimaker_s8
+name = Visual
+version = 4
+
+[metadata]
+intent_category = visual
+material = ultimaker_abs
+quality_type = high
+setting_version = 25
+type = intent
+variant = AA 0.4
+
+[values]
+acceleration_print = 2500
+acceleration_wall_0 = 1000
+inset_direction = inside_out
+jerk_wall_0 = 4000
+max_flow_acceleration = 0.5
+speed_print = 50
+speed_roofing = =math.ceil(speed_wall*(35/50))
+speed_wall_0 = =math.ceil(speed_wall*(20/50))
+speed_wall_x = =math.ceil(speed_wall*(35/50))
+top_bottom_thickness = =max(1.2 , layer_height * 6)
+z_seam_type = back
+

resources/intent/ultimaker_s8/um_s8_aa0.4_um-abs_0.15mm_engineering.inst.cfg

@@ -0,0 +1,28 @@
+[general]
+definition = ultimaker_s8
+name = Accurate
+version = 4
+
+[metadata]
+intent_category = engineering
+material = ultimaker_abs
+quality_type = fast
+setting_version = 25
+type = intent
+variant = AA 0.4
+
+[values]
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
+infill_sparse_density = 20
+jerk_print = 6000
+max_flow_acceleration = 1
+speed_infill = =speed_print
+speed_print = 35
+speed_roofing = =speed_topbottom
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 3
+

resources/intent/ultimaker_s8/um_s8_aa0.4_um-abs_0.15mm_visual.inst.cfg

@@ -0,0 +1,26 @@
+[general]
+definition = ultimaker_s8
+name = Visual
+version = 4
+
+[metadata]
+intent_category = visual
+material = ultimaker_abs
+quality_type = fast
+setting_version = 25
+type = intent
+variant = AA 0.4
+
+[values]
+acceleration_print = 2500
+acceleration_wall_0 = 1000
+inset_direction = inside_out
+jerk_wall_0 = 4000
+max_flow_acceleration = 0.5
+speed_print = 50
+speed_roofing = =math.ceil(speed_wall*(35/50))
+speed_wall_0 = =math.ceil(speed_wall*(20/50))
+speed_wall_x = =math.ceil(speed_wall*(35/50))
+top_bottom_thickness = =max(1.2 , layer_height * 6)
+z_seam_type = back
+

resources/intent/ultimaker_s8/um_s8_aa0.4_um-abs_0.1mm_engineering.inst.cfg

@@ -0,0 +1,28 @@
+[general]
+definition = ultimaker_s8
+name = Accurate
+version = 4
+
+[metadata]
+intent_category = engineering
+material = ultimaker_abs
+quality_type = normal
+setting_version = 25
+type = intent
+variant = AA 0.4
+
+[values]
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
+infill_sparse_density = 20
+jerk_print = 6000
+max_flow_acceleration = 1
+speed_infill = =speed_print
+speed_print = 35
+speed_roofing = =speed_topbottom
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 3
+

resources/intent/ultimaker_s8/um_s8_aa0.4_um-abs_0.1mm_visual.inst.cfg

@@ -0,0 +1,26 @@
+[general]
+definition = ultimaker_s8
+name = Visual
+version = 4
+
+[metadata]
+intent_category = visual
+material = ultimaker_abs
+quality_type = normal
+setting_version = 25
+type = intent
+variant = AA 0.4
+
+[values]
+acceleration_print = 2500
+acceleration_wall_0 = 1000
+inset_direction = inside_out
+jerk_wall_0 = 4000
+max_flow_acceleration = 0.5
+speed_print = 50
+speed_roofing = =math.ceil(speed_wall*(35/50))
+speed_wall_0 = =math.ceil(speed_wall*(20/50))
+speed_wall_x = =math.ceil(speed_wall*(35/50))
+top_bottom_thickness = =max(1.2 , layer_height * 6)
+z_seam_type = back
+

resources/intent/ultimaker_s8/um_s8_aa0.4_um-abs_0.2mm_engineering.inst.cfg

@@ -0,0 +1,28 @@
+[general]
+definition = ultimaker_s8
+name = Accurate
+version = 4
+
+[metadata]
+intent_category = engineering
+material = ultimaker_abs
+quality_type = draft
+setting_version = 25
+type = intent
+variant = AA 0.4
+
+[values]
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
+infill_sparse_density = 20
+jerk_print = 6000
+max_flow_acceleration = 1
+speed_infill = =speed_print
+speed_print = 35
+speed_roofing = =speed_topbottom
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 3
+

resources/intent/ultimaker_s8/um_s8_aa0.4_um-abs_0.2mm_quick.inst.cfg

@@ -0,0 +1,27 @@
+[general]
+definition = ultimaker_s8
+name = Quick
+version = 4
+
+[metadata]
+intent_category = quick
+material = ultimaker_abs
+quality_type = draft
+setting_version = 25
+type = intent
+variant = AA 0.4
+
+[values]
+acceleration_wall_0 = 2000
+gradual_flow_enabled = False
+gradual_infill_step_height = =4 * layer_height
+gradual_infill_steps = 3
+infill_sparse_density = 40
+jerk_print = 6000
+jerk_wall_0 = 6000
+speed_print = 150
+speed_wall = =speed_print
+speed_wall_0 = 40
+top_bottom_thickness = =4 * layer_height
+wall_thickness = =2 * line_width
+

resources/intent/ultimaker_s8/um_s8_aa0.4_um-abs_0.2mm_visual.inst.cfg

@@ -0,0 +1,26 @@
+[general]
+definition = ultimaker_s8
+name = Visual
+version = 4
+
+[metadata]
+intent_category = visual
+material = ultimaker_abs
+quality_type = draft
+setting_version = 25
+type = intent
+variant = AA 0.4
+
+[values]
+acceleration_print = 2500
+acceleration_wall_0 = 1000
+inset_direction = inside_out
+jerk_wall_0 = 4000
+max_flow_acceleration = 0.5
+speed_print = 50
+speed_roofing = =math.ceil(speed_wall*(35/50))
+speed_wall_0 = =math.ceil(speed_wall*(20/50))
+speed_wall_x = =math.ceil(speed_wall*(35/50))
+top_bottom_thickness = =max(1.2 , layer_height * 6)
+z_seam_type = back
+

resources/intent/ultimaker_s8/um_s8_aa0.4_um-abs_0.3mm_quick.inst.cfg

@@ -0,0 +1,27 @@
+[general]
+definition = ultimaker_s8
+name = Quick
+version = 4
+
+[metadata]
+intent_category = quick
+material = ultimaker_abs
+quality_type = verydraft
+setting_version = 25
+type = intent
+variant = AA 0.4
+
+[values]
+acceleration_wall_0 = 2000
+gradual_flow_enabled = False
+gradual_infill_step_height = =4 * layer_height
+gradual_infill_steps = 3
+infill_sparse_density = 40
+jerk_print = 6000
+jerk_wall_0 = 6000
+speed_print = 150
+speed_wall = =speed_print
+speed_wall_0 = 40
+top_bottom_thickness = =4 * layer_height
+wall_thickness = =2 * line_width
+

resources/intent/ultimaker_s8/um_s8_aa0.4_um-petg_0.06mm_visual.inst.cfg

@@ -0,0 +1,26 @@
+[general]
+definition = ultimaker_s8
+name = Visual
+version = 4
+
+[metadata]
+intent_category = visual
+material = ultimaker_petg
+quality_type = high
+setting_version = 25
+type = intent
+variant = AA 0.4
+
+[values]
+acceleration_print = 2500
+acceleration_wall_0 = 1000
+inset_direction = inside_out
+jerk_wall_0 = 4000
+max_flow_acceleration = 0.5
+speed_print = 50
+speed_roofing = =math.ceil(speed_wall*(35/50))
+speed_wall_0 = =math.ceil(speed_wall*(20/50))
+speed_wall_x = =math.ceil(speed_wall*(35/50))
+top_bottom_thickness = =max(1.2 , layer_height * 6)
+z_seam_type = back
+

resources/intent/ultimaker_s8/um_s8_aa0.4_um-petg_0.15mm_engineering.inst.cfg

@@ -0,0 +1,28 @@
+[general]
+definition = ultimaker_s8
+name = Accurate
+version = 4
+
+[metadata]
+intent_category = engineering
+material = ultimaker_petg
+quality_type = fast
+setting_version = 25
+type = intent
+variant = AA 0.4
+
+[values]
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
+infill_sparse_density = 20
+jerk_print = 6000
+max_flow_acceleration = 1
+speed_infill = =speed_print
+speed_print = 35
+speed_roofing = =speed_topbottom
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 3
+

resources/intent/ultimaker_s8/um_s8_aa0.4_um-petg_0.15mm_visual.inst.cfg

@@ -0,0 +1,26 @@
+[general]
+definition = ultimaker_s8
+name = Visual
+version = 4
+
+[metadata]
+intent_category = visual
+material = ultimaker_petg
+quality_type = fast
+setting_version = 25
+type = intent
+variant = AA 0.4
+
+[values]
+acceleration_print = 2500
+acceleration_wall_0 = 1000
+inset_direction = inside_out
+jerk_wall_0 = 4000
+max_flow_acceleration = 0.5
+speed_print = 50
+speed_roofing = =math.ceil(speed_wall*(35/50))
+speed_wall_0 = =math.ceil(speed_wall*(20/50))
+speed_wall_x = =math.ceil(speed_wall*(35/50))
+top_bottom_thickness = =max(1.2 , layer_height * 6)
+z_seam_type = back
+

resources/intent/ultimaker_s8/um_s8_aa0.4_um-petg_0.1mm_engineering.inst.cfg

@@ -0,0 +1,28 @@
+[general]
+definition = ultimaker_s8
+name = Accurate
+version = 4
+
+[metadata]
+intent_category = engineering
+material = ultimaker_petg
+quality_type = normal
+setting_version = 25
+type = intent
+variant = AA 0.4
+
+[values]
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
+infill_sparse_density = 20
+jerk_print = 6000
+max_flow_acceleration = 1
+speed_infill = =speed_print
+speed_print = 35
+speed_roofing = =speed_topbottom
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 3
+

resources/intent/ultimaker_s8/um_s8_aa0.4_um-petg_0.1mm_visual.inst.cfg

@@ -0,0 +1,26 @@
+[general]
+definition = ultimaker_s8
+name = Visual
+version = 4
+
+[metadata]
+intent_category = visual
+material = ultimaker_petg
+quality_type = normal
+setting_version = 25
+type = intent
+variant = AA 0.4
+
+[values]
+acceleration_print = 2500
+acceleration_wall_0 = 1000
+inset_direction = inside_out
+jerk_wall_0 = 4000
+max_flow_acceleration = 0.5
+speed_print = 50
+speed_roofing = =math.ceil(speed_wall*(35/50))
+speed_wall_0 = =math.ceil(speed_wall*(20/50))
+speed_wall_x = =math.ceil(speed_wall*(35/50))
+top_bottom_thickness = =max(1.2 , layer_height * 6)
+z_seam_type = back
+

resources/intent/ultimaker_s8/um_s8_aa0.4_um-petg_0.2mm_engineering.inst.cfg

@@ -0,0 +1,28 @@
+[general]
+definition = ultimaker_s8
+name = Accurate
+version = 4
+
+[metadata]
+intent_category = engineering
+material = ultimaker_petg
+quality_type = draft
+setting_version = 25
+type = intent
+variant = AA 0.4
+
+[values]
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
+infill_sparse_density = 20
+jerk_print = 6000
+max_flow_acceleration = 1
+speed_infill = =speed_print
+speed_print = 35
+speed_roofing = =speed_topbottom
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 3
+

resources/intent/ultimaker_s8/um_s8_aa0.4_um-petg_0.2mm_quick.inst.cfg

@@ -0,0 +1,27 @@
+[general]
+definition = ultimaker_s8
+name = Quick
+version = 4
+
+[metadata]
+intent_category = quick
+material = ultimaker_petg
+quality_type = draft
+setting_version = 25
+type = intent
+variant = AA 0.4
+
+[values]
+acceleration_wall_0 = 2000
+gradual_flow_enabled = False
+gradual_infill_step_height = =4 * layer_height
+gradual_infill_steps = 3
+infill_sparse_density = 40
+jerk_print = 6000
+jerk_wall_0 = 6000
+speed_print = 150
+speed_wall = =speed_print
+speed_wall_0 = 40
+top_bottom_thickness = =4 * layer_height
+wall_thickness = =2 * line_width
+

resources/intent/ultimaker_s8/um_s8_aa0.4_um-petg_0.2mm_visual.inst.cfg

@@ -0,0 +1,26 @@
+[general]
+definition = ultimaker_s8
+name = Visual
+version = 4
+
+[metadata]
+intent_category = visual
+material = ultimaker_petg
+quality_type = draft
+setting_version = 25
+type = intent
+variant = AA 0.4
+
+[values]
+acceleration_print = 2500
+acceleration_wall_0 = 1000
+inset_direction = inside_out
+jerk_wall_0 = 4000
+max_flow_acceleration = 0.5
+speed_print = 50
+speed_roofing = =math.ceil(speed_wall*(35/50))
+speed_wall_0 = =math.ceil(speed_wall*(20/50))
+speed_wall_x = =math.ceil(speed_wall*(35/50))
+top_bottom_thickness = =max(1.2 , layer_height * 6)
+z_seam_type = back
+

resources/intent/ultimaker_s8/um_s8_aa0.4_um-petg_0.3mm_quick.inst.cfg

@@ -0,0 +1,27 @@
+[general]
+definition = ultimaker_s8
+name = Quick
+version = 4
+
+[metadata]
+intent_category = quick
+material = ultimaker_petg
+quality_type = verydraft
+setting_version = 25
+type = intent
+variant = AA 0.4
+
+[values]
+acceleration_wall_0 = 2000
+gradual_flow_enabled = False
+gradual_infill_step_height = =4 * layer_height
+gradual_infill_steps = 3
+infill_sparse_density = 40
+jerk_print = 6000
+jerk_wall_0 = 6000
+speed_print = 150
+speed_wall = =speed_print
+speed_wall_0 = 40
+top_bottom_thickness = =4 * layer_height
+wall_thickness = =2 * line_width
+

resources/intent/ultimaker_s8/um_s8_aa0.4_um-pla_0.06mm_visual.inst.cfg

@@ -0,0 +1,26 @@
+[general]
+definition = ultimaker_s8
+name = Visual
+version = 4
+
+[metadata]
+intent_category = visual
+material = ultimaker_pla
+quality_type = high
+setting_version = 25
+type = intent
+variant = AA 0.4
+
+[values]
+acceleration_print = 2500
+acceleration_wall_0 = 1000
+inset_direction = inside_out
+jerk_wall_0 = 4000
+max_flow_acceleration = 0.5
+speed_print = 50
+speed_roofing = =math.ceil(speed_wall*(35/50))
+speed_wall_0 = =math.ceil(speed_wall*(20/50))
+speed_wall_x = =math.ceil(speed_wall*(35/50))
+top_bottom_thickness = =max(1.2 , layer_height * 6)
+z_seam_type = back
+

resources/intent/ultimaker_s8/um_s8_aa0.4_um-pla_0.15mm_engineering.inst.cfg

@@ -0,0 +1,28 @@
+[general]
+definition = ultimaker_s8
+name = Accurate
+version = 4
+
+[metadata]
+intent_category = engineering
+material = ultimaker_pla
+quality_type = fast
+setting_version = 25
+type = intent
+variant = AA 0.4
+
+[values]
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
+infill_sparse_density = 20
+jerk_print = 6000
+max_flow_acceleration = 1
+speed_infill = =speed_print
+speed_print = 35
+speed_roofing = =speed_topbottom
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 3
+

resources/intent/ultimaker_s8/um_s8_aa0.4_um-pla_0.15mm_visual.inst.cfg

@@ -0,0 +1,26 @@
+[general]
+definition = ultimaker_s8
+name = Visual
+version = 4
+
+[metadata]
+intent_category = visual
+material = ultimaker_pla
+quality_type = fast
+setting_version = 25
+type = intent
+variant = AA 0.4
+
+[values]
+acceleration_print = 2500
+acceleration_wall_0 = 1000
+inset_direction = inside_out
+jerk_wall_0 = 4000
+max_flow_acceleration = 0.5
+speed_print = 50
+speed_roofing = =math.ceil(speed_wall*(35/50))
+speed_wall_0 = =math.ceil(speed_wall*(20/50))
+speed_wall_x = =math.ceil(speed_wall*(35/50))
+top_bottom_thickness = =max(1.2 , layer_height * 6)
+z_seam_type = back
+

resources/intent/ultimaker_s8/um_s8_aa0.4_um-pla_0.1mm_engineering.inst.cfg

@@ -0,0 +1,28 @@
+[general]
+definition = ultimaker_s8
+name = Accurate
+version = 4
+
+[metadata]
+intent_category = engineering
+material = ultimaker_pla
+quality_type = normal
+setting_version = 25
+type = intent
+variant = AA 0.4
+
+[values]
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
+infill_sparse_density = 20
+jerk_print = 6000
+max_flow_acceleration = 1
+speed_infill = =speed_print
+speed_print = 35
+speed_roofing = =speed_topbottom
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 3
+

resources/intent/ultimaker_s8/um_s8_aa0.4_um-pla_0.1mm_visual.inst.cfg

@@ -0,0 +1,26 @@
+[general]
+definition = ultimaker_s8
+name = Visual
+version = 4
+
+[metadata]
+intent_category = visual
+material = ultimaker_pla
+quality_type = normal
+setting_version = 25
+type = intent
+variant = AA 0.4
+
+[values]
+acceleration_print = 2500
+acceleration_wall_0 = 1000
+inset_direction = inside_out
+jerk_wall_0 = 4000
+max_flow_acceleration = 0.5
+speed_print = 50
+speed_roofing = =math.ceil(speed_wall*(35/50))
+speed_wall_0 = =math.ceil(speed_wall*(20/50))
+speed_wall_x = =math.ceil(speed_wall*(35/50))
+top_bottom_thickness = =max(1.2 , layer_height * 6)
+z_seam_type = back
+

resources/intent/ultimaker_s8/um_s8_aa0.4_um-pla_0.2mm_engineering.inst.cfg

@@ -0,0 +1,28 @@
+[general]
+definition = ultimaker_s8
+name = Accurate
+version = 4
+
+[metadata]
+intent_category = engineering
+material = ultimaker_pla
+quality_type = draft
+setting_version = 25
+type = intent
+variant = AA 0.4
+
+[values]
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
+infill_sparse_density = 20
+jerk_print = 6000
+max_flow_acceleration = 1
+speed_infill = =speed_print
+speed_print = 35
+speed_roofing = =speed_topbottom
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 3
+

resources/intent/ultimaker_s8/um_s8_aa0.4_um-pla_0.2mm_quick.inst.cfg

@@ -0,0 +1,27 @@
+[general]
+definition = ultimaker_s8
+name = Quick
+version = 4
+
+[metadata]
+intent_category = quick
+material = ultimaker_pla
+quality_type = draft
+setting_version = 25
+type = intent
+variant = AA 0.4
+
+[values]
+acceleration_wall_0 = 2000
+gradual_flow_enabled = False
+gradual_infill_step_height = =4 * layer_height
+gradual_infill_steps = 3
+infill_sparse_density = 40
+jerk_print = 6000
+jerk_wall_0 = 6000
+speed_print = 150
+speed_wall = =speed_print
+speed_wall_0 = 40
+top_bottom_thickness = =4 * layer_height
+wall_thickness = =2 * line_width
+

resources/intent/ultimaker_s8/um_s8_aa0.4_um-pla_0.2mm_visual.inst.cfg

@@ -0,0 +1,26 @@
+[general]
+definition = ultimaker_s8
+name = Visual
+version = 4
+
+[metadata]
+intent_category = visual
+material = ultimaker_pla
+quality_type = draft
+setting_version = 25
+type = intent
+variant = AA 0.4
+
+[values]
+acceleration_print = 2500
+acceleration_wall_0 = 1000
+inset_direction = inside_out
+jerk_wall_0 = 4000
+max_flow_acceleration = 0.5
+speed_print = 50
+speed_roofing = =math.ceil(speed_wall*(35/50))
+speed_wall_0 = =math.ceil(speed_wall*(20/50))
+speed_wall_x = =math.ceil(speed_wall*(35/50))
+top_bottom_thickness = =max(1.2 , layer_height * 6)
+z_seam_type = back
+

resources/intent/ultimaker_s8/um_s8_aa0.4_um-pla_0.3mm_quick.inst.cfg

@@ -0,0 +1,27 @@
+[general]
+definition = ultimaker_s8
+name = Quick
+version = 4
+
+[metadata]
+intent_category = quick
+material = ultimaker_pla
+quality_type = verydraft
+setting_version = 25
+type = intent
+variant = AA 0.4
+
+[values]
+acceleration_wall_0 = 2000
+gradual_flow_enabled = False
+gradual_infill_step_height = =4 * layer_height
+gradual_infill_steps = 3
+infill_sparse_density = 40
+jerk_print = 6000
+jerk_wall_0 = 6000
+speed_print = 150
+speed_wall = =speed_print
+speed_wall_0 = 40
+top_bottom_thickness = =4 * layer_height
+wall_thickness = =2 * line_width
+

resources/intent/ultimaker_s8/um_s8_aa0.4_um-tough-pla_0.06mm_visual.inst.cfg

@@ -0,0 +1,26 @@
+[general]
+definition = ultimaker_s8
+name = Visual
+version = 4
+
+[metadata]
+intent_category = visual
+material = ultimaker_tough_pla
+quality_type = high
+setting_version = 25
+type = intent
+variant = AA 0.4
+
+[values]
+acceleration_print = 2500
+acceleration_wall_0 = 1000
+inset_direction = inside_out
+jerk_wall_0 = 4000
+max_flow_acceleration = 0.5
+speed_print = 50
+speed_roofing = =math.ceil(speed_wall*(35/50))
+speed_wall_0 = =math.ceil(speed_wall*(20/50))
+speed_wall_x = =math.ceil(speed_wall*(35/50))
+top_bottom_thickness = =max(1.2 , layer_height * 6)
+z_seam_type = back
+

resources/intent/ultimaker_s8/um_s8_aa0.4_um-tough-pla_0.15mm_engineering.inst.cfg

@@ -0,0 +1,28 @@
+[general]
+definition = ultimaker_s8
+name = Accurate
+version = 4
+
+[metadata]
+intent_category = engineering
+material = ultimaker_tough_pla
+quality_type = fast
+setting_version = 25
+type = intent
+variant = AA 0.4
+
+[values]
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
+infill_sparse_density = 20
+jerk_print = 6000
+max_flow_acceleration = 1
+speed_infill = =speed_print
+speed_print = 35
+speed_roofing = =speed_topbottom
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 3
+

resources/intent/ultimaker_s8/um_s8_aa0.4_um-tough-pla_0.15mm_visual.inst.cfg

@@ -0,0 +1,26 @@
+[general]
+definition = ultimaker_s8
+name = Visual
+version = 4
+
+[metadata]
+intent_category = visual
+material = ultimaker_tough_pla
+quality_type = fast
+setting_version = 25
+type = intent
+variant = AA 0.4
+
+[values]
+acceleration_print = 2500
+acceleration_wall_0 = 1000
+inset_direction = inside_out
+jerk_wall_0 = 4000
+max_flow_acceleration = 0.5
+speed_print = 50
+speed_roofing = =math.ceil(speed_wall*(35/50))
+speed_wall_0 = =math.ceil(speed_wall*(20/50))
+speed_wall_x = =math.ceil(speed_wall*(35/50))
+top_bottom_thickness = =max(1.2 , layer_height * 6)
+z_seam_type = back
+

resources/intent/ultimaker_s8/um_s8_aa0.4_um-tough-pla_0.1mm_engineering.inst.cfg

@@ -0,0 +1,28 @@
+[general]
+definition = ultimaker_s8
+name = Accurate
+version = 4
+
+[metadata]
+intent_category = engineering
+material = ultimaker_tough_pla
+quality_type = normal
+setting_version = 25
+type = intent
+variant = AA 0.4
+
+[values]
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
+infill_sparse_density = 20
+jerk_print = 6000
+max_flow_acceleration = 1
+speed_infill = =speed_print
+speed_print = 35
+speed_roofing = =speed_topbottom
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 3
+

resources/intent/ultimaker_s8/um_s8_aa0.4_um-tough-pla_0.1mm_visual.inst.cfg

@@ -0,0 +1,26 @@
+[general]
+definition = ultimaker_s8
+name = Visual
+version = 4
+
+[metadata]
+intent_category = visual
+material = ultimaker_tough_pla
+quality_type = normal
+setting_version = 25
+type = intent
+variant = AA 0.4
+
+[values]
+acceleration_print = 2500
+acceleration_wall_0 = 1000
+inset_direction = inside_out
+jerk_wall_0 = 4000
+max_flow_acceleration = 0.5
+speed_print = 50
+speed_roofing = =math.ceil(speed_wall*(35/50))
+speed_wall_0 = =math.ceil(speed_wall*(20/50))
+speed_wall_x = =math.ceil(speed_wall*(35/50))
+top_bottom_thickness = =max(1.2 , layer_height * 6)
+z_seam_type = back
+

resources/intent/ultimaker_s8/um_s8_aa0.4_um-tough-pla_0.2mm_engineering.inst.cfg

@@ -0,0 +1,28 @@
+[general]
+definition = ultimaker_s8
+name = Accurate
+version = 4
+
+[metadata]
+intent_category = engineering
+material = ultimaker_tough_pla
+quality_type = draft
+setting_version = 25
+type = intent
+variant = AA 0.4
+
+[values]
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
+infill_sparse_density = 20
+jerk_print = 6000
+max_flow_acceleration = 1
+speed_infill = =speed_print
+speed_print = 35
+speed_roofing = =speed_topbottom
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 3
+

resources/intent/ultimaker_s8/um_s8_aa0.4_um-tough-pla_0.2mm_quick.inst.cfg

@@ -0,0 +1,27 @@
+[general]
+definition = ultimaker_s8
+name = Quick
+version = 4
+
+[metadata]
+intent_category = quick
+material = ultimaker_tough_pla
+quality_type = draft
+setting_version = 25
+type = intent
+variant = AA 0.4
+
+[values]
+acceleration_wall_0 = 2000
+gradual_flow_enabled = False
+gradual_infill_step_height = =4 * layer_height
+gradual_infill_steps = 3
+infill_sparse_density = 40
+jerk_print = 6000
+jerk_wall_0 = 6000
+speed_print = 150
+speed_wall = =speed_print
+speed_wall_0 = 40
+top_bottom_thickness = =4 * layer_height
+wall_thickness = =2 * line_width
+

resources/intent/ultimaker_s8/um_s8_aa0.4_um-tough-pla_0.2mm_visual.inst.cfg

@@ -0,0 +1,26 @@
+[general]
+definition = ultimaker_s8
+name = Visual
+version = 4
+
+[metadata]
+intent_category = visual
+material = ultimaker_tough_pla
+quality_type = draft
+setting_version = 25
+type = intent
+variant = AA 0.4
+
+[values]
+acceleration_print = 2500
+acceleration_wall_0 = 1000
+inset_direction = inside_out
+jerk_wall_0 = 4000
+max_flow_acceleration = 0.5
+speed_print = 50
+speed_roofing = =math.ceil(speed_wall*(35/50))
+speed_wall_0 = =math.ceil(speed_wall*(20/50))
+speed_wall_x = =math.ceil(speed_wall*(35/50))
+top_bottom_thickness = =max(1.2 , layer_height * 6)
+z_seam_type = back
+

resources/intent/ultimaker_s8/um_s8_aa0.4_um-tough-pla_0.3mm_quick.inst.cfg

@@ -0,0 +1,27 @@
+[general]
+definition = ultimaker_s8
+name = Quick
+version = 4
+
+[metadata]
+intent_category = quick
+material = ultimaker_tough_pla
+quality_type = verydraft
+setting_version = 25
+type = intent
+variant = AA 0.4
+
+[values]
+acceleration_wall_0 = 2000
+gradual_flow_enabled = False
+gradual_infill_step_height = =4 * layer_height
+gradual_infill_steps = 3
+infill_sparse_density = 40
+jerk_print = 6000
+jerk_wall_0 = 6000
+speed_print = 150
+speed_wall = =speed_print
+speed_wall_0 = 40
+top_bottom_thickness = =4 * layer_height
+wall_thickness = =2 * line_width
+

resources/intent/ultimaker_s8/um_s8_aa0.8_um-abs_0.2mm_engineering.inst.cfg

@@ -0,0 +1,28 @@
+[general]
+definition = ultimaker_s8
+name = Accurate
+version = 4
+
+[metadata]
+intent_category = engineering
+material = ultimaker_abs
+quality_type = draft
+setting_version = 25
+type = intent
+variant = AA 0.8
+
+[values]
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
+infill_sparse_density = 20
+jerk_print = 6000
+max_flow_acceleration = 1
+speed_infill = =speed_print
+speed_print = 35
+speed_roofing = =speed_topbottom
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 3
+

resources/intent/ultimaker_s8/um_s8_aa0.8_um-abs_0.2mm_quick.inst.cfg

@@ -0,0 +1,26 @@
+[general]
+definition = ultimaker_s8
+name = Quick
+version = 4
+
+[metadata]
+intent_category = quick
+material = ultimaker_abs
+quality_type = draft
+setting_version = 25
+type = intent
+variant = AA 0.8
+
+[values]
+acceleration_wall_0 = 2000
+gradual_flow_enabled = False
+gradual_infill_step_height = =4 * layer_height
+gradual_infill_steps = 3
+infill_sparse_density = 40
+jerk_print = 6000
+jerk_wall_0 = 6000
+speed_wall = =speed_print
+speed_wall_0 = 40
+top_bottom_thickness = =4 * layer_height
+wall_thickness = =wall_line_width_0
+

resources/intent/ultimaker_s8/um_s8_aa0.8_um-abs_0.2mm_visual.inst.cfg

@@ -0,0 +1,26 @@
+[general]
+definition = ultimaker_s8
+name = Visual
+version = 4
+
+[metadata]
+intent_category = visual
+material = ultimaker_abs
+quality_type = draft
+setting_version = 25
+type = intent
+variant = AA 0.8
+
+[values]
+acceleration_print = 2500
+acceleration_wall_0 = 1000
+inset_direction = inside_out
+jerk_wall_0 = 4000
+max_flow_acceleration = 0.5
+speed_print = 50
+speed_roofing = =math.ceil(speed_wall*(35/50))
+speed_wall_0 = =math.ceil(speed_wall*(20/50))
+speed_wall_x = =math.ceil(speed_wall*(35/50))
+top_bottom_thickness = =max(1.2 , layer_height * 6)
+z_seam_type = back
+

resources/intent/ultimaker_s8/um_s8_aa0.8_um-abs_0.3mm_quick.inst.cfg

@@ -0,0 +1,26 @@
+[general]
+definition = ultimaker_s8
+name = Quick
+version = 4
+
+[metadata]
+intent_category = quick
+material = ultimaker_abs
+quality_type = verydraft
+setting_version = 25
+type = intent
+variant = AA 0.8
+
+[values]
+acceleration_wall_0 = 2000
+gradual_flow_enabled = False
+gradual_infill_step_height = =4 * layer_height
+gradual_infill_steps = 3
+infill_sparse_density = 40
+jerk_print = 6000
+jerk_wall_0 = 6000
+speed_wall = =speed_print
+speed_wall_0 = 40
+top_bottom_thickness = =4 * layer_height
+wall_thickness = =wall_line_width_0
+

resources/intent/ultimaker_s8/um_s8_aa0.8_um-abs_0.4mm_quick.inst.cfg

@@ -0,0 +1,26 @@
+[general]
+definition = ultimaker_s8
+name = Quick
+version = 4
+
+[metadata]
+intent_category = quick
+material = ultimaker_abs
+quality_type = superdraft
+setting_version = 25
+type = intent
+variant = AA 0.8
+
+[values]
+acceleration_wall_0 = 2000
+gradual_flow_enabled = False
+gradual_infill_step_height = =4 * layer_height
+gradual_infill_steps = 3
+infill_sparse_density = 40
+jerk_print = 6000
+jerk_wall_0 = 6000
+speed_wall = =speed_print
+speed_wall_0 = 40
+top_bottom_thickness = =4 * layer_height
+wall_thickness = =wall_line_width_0
+

resources/intent/ultimaker_s8/um_s8_aa0.8_um-petg_0.2mm_engineering.inst.cfg

@@ -0,0 +1,28 @@
+[general]
+definition = ultimaker_s8
+name = Accurate
+version = 4
+
+[metadata]
+intent_category = engineering
+material = ultimaker_petg
+quality_type = draft
+setting_version = 25
+type = intent
+variant = AA 0.8
+
+[values]
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
+infill_sparse_density = 20
+jerk_print = 6000
+max_flow_acceleration = 1
+speed_infill = =speed_print
+speed_print = 35
+speed_roofing = =speed_topbottom
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 3
+

resources/intent/ultimaker_s8/um_s8_aa0.8_um-petg_0.2mm_quick.inst.cfg

@@ -0,0 +1,26 @@
+[general]
+definition = ultimaker_s8
+name = Quick
+version = 4
+
+[metadata]
+intent_category = quick
+material = ultimaker_petg
+quality_type = draft
+setting_version = 25
+type = intent
+variant = AA 0.8
+
+[values]
+acceleration_wall_0 = 2000
+gradual_flow_enabled = False
+gradual_infill_step_height = =4 * layer_height
+gradual_infill_steps = 3
+infill_sparse_density = 40
+jerk_print = 6000
+jerk_wall_0 = 6000
+speed_wall = =speed_print
+speed_wall_0 = 40
+top_bottom_thickness = =4 * layer_height
+wall_thickness = =wall_line_width_0
+

resources/intent/ultimaker_s8/um_s8_aa0.8_um-petg_0.2mm_visual.inst.cfg

@@ -0,0 +1,26 @@
+[general]
+definition = ultimaker_s8
+name = Visual
+version = 4
+
+[metadata]
+intent_category = visual
+material = ultimaker_petg
+quality_type = draft
+setting_version = 25
+type = intent
+variant = AA 0.8
+
+[values]
+acceleration_print = 2500
+acceleration_wall_0 = 1000
+inset_direction = inside_out
+jerk_wall_0 = 4000
+max_flow_acceleration = 0.5
+speed_print = 50
+speed_roofing = =math.ceil(speed_wall*(35/50))
+speed_wall_0 = =math.ceil(speed_wall*(20/50))
+speed_wall_x = =math.ceil(speed_wall*(35/50))
+top_bottom_thickness = =max(1.2 , layer_height * 6)
+z_seam_type = back
+

resources/intent/ultimaker_s8/um_s8_aa0.8_um-petg_0.3mm_quick.inst.cfg

@@ -0,0 +1,26 @@
+[general]
+definition = ultimaker_s8
+name = Quick
+version = 4
+
+[metadata]
+intent_category = quick
+material = ultimaker_petg
+quality_type = verydraft
+setting_version = 25
+type = intent
+variant = AA 0.8
+
+[values]
+acceleration_wall_0 = 2000
+gradual_flow_enabled = False
+gradual_infill_step_height = =4 * layer_height
+gradual_infill_steps = 3
+infill_sparse_density = 40
+jerk_print = 6000
+jerk_wall_0 = 6000
+speed_wall = =speed_print
+speed_wall_0 = 40
+top_bottom_thickness = =4 * layer_height
+wall_thickness = =wall_line_width_0
+

resources/intent/ultimaker_s8/um_s8_aa0.8_um-petg_0.4mm_quick.inst.cfg

@@ -0,0 +1,26 @@
+[general]
+definition = ultimaker_s8
+name = Quick
+version = 4
+
+[metadata]
+intent_category = quick
+material = ultimaker_petg
+quality_type = superdraft
+setting_version = 25
+type = intent
+variant = AA 0.8
+
+[values]
+acceleration_wall_0 = 2000
+gradual_flow_enabled = False
+gradual_infill_step_height = =4 * layer_height
+gradual_infill_steps = 3
+infill_sparse_density = 40
+jerk_print = 6000
+jerk_wall_0 = 6000
+speed_wall = =speed_print
+speed_wall_0 = 40
+top_bottom_thickness = =4 * layer_height
+wall_thickness = =wall_line_width_0
+

resources/intent/ultimaker_s8/um_s8_aa0.8_um-pla_0.2mm_engineering.inst.cfg

@@ -0,0 +1,28 @@
+[general]
+definition = ultimaker_s8
+name = Accurate
+version = 4
+
+[metadata]
+intent_category = engineering
+material = ultimaker_pla
+quality_type = draft
+setting_version = 25
+type = intent
+variant = AA 0.8
+
+[values]
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
+infill_sparse_density = 20
+jerk_print = 6000
+max_flow_acceleration = 1
+speed_infill = =speed_print
+speed_print = 35
+speed_roofing = =speed_topbottom
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 3
+

resources/intent/ultimaker_s8/um_s8_aa0.8_um-pla_0.2mm_quick.inst.cfg

@@ -0,0 +1,26 @@
+[general]
+definition = ultimaker_s8
+name = Quick
+version = 4
+
+[metadata]
+intent_category = quick
+material = ultimaker_pla
+quality_type = draft
+setting_version = 25
+type = intent
+variant = AA 0.8
+
+[values]
+acceleration_wall_0 = 2000
+gradual_flow_enabled = False
+gradual_infill_step_height = =4 * layer_height
+gradual_infill_steps = 3
+infill_sparse_density = 40
+jerk_print = 6000
+jerk_wall_0 = 6000
+speed_wall = =speed_print
+speed_wall_0 = 40
+top_bottom_thickness = =4 * layer_height
+wall_thickness = =wall_line_width_0
+

resources/intent/ultimaker_s8/um_s8_aa0.8_um-pla_0.2mm_visual.inst.cfg

@@ -0,0 +1,26 @@
+[general]
+definition = ultimaker_s8
+name = Visual
+version = 4
+
+[metadata]
+intent_category = visual
+material = ultimaker_pla
+quality_type = draft
+setting_version = 25
+type = intent
+variant = AA 0.8
+
+[values]
+acceleration_print = 2500
+acceleration_wall_0 = 1000
+inset_direction = inside_out
+jerk_wall_0 = 4000
+max_flow_acceleration = 0.5
+speed_print = 50
+speed_roofing = =math.ceil(speed_wall*(35/50))
+speed_wall_0 = =math.ceil(speed_wall*(20/50))
+speed_wall_x = =math.ceil(speed_wall*(35/50))
+top_bottom_thickness = =max(1.2 , layer_height * 6)
+z_seam_type = back
+

resources/intent/ultimaker_s8/um_s8_aa0.8_um-pla_0.3mm_quick.inst.cfg

@@ -0,0 +1,26 @@
+[general]
+definition = ultimaker_s8
+name = Quick
+version = 4
+
+[metadata]
+intent_category = quick
+material = ultimaker_pla
+quality_type = verydraft
+setting_version = 25
+type = intent
+variant = AA 0.8
+
+[values]
+acceleration_wall_0 = 2000
+gradual_flow_enabled = False
+gradual_infill_step_height = =4 * layer_height
+gradual_infill_steps = 3
+infill_sparse_density = 40
+jerk_print = 6000
+jerk_wall_0 = 6000
+speed_wall = =speed_print
+speed_wall_0 = 40
+top_bottom_thickness = =4 * layer_height
+wall_thickness = =wall_line_width_0
+

resources/intent/ultimaker_s8/um_s8_aa0.8_um-pla_0.4mm_quick.inst.cfg

@@ -0,0 +1,26 @@
+[general]
+definition = ultimaker_s8
+name = Quick
+version = 4
+
+[metadata]
+intent_category = quick
+material = ultimaker_pla
+quality_type = superdraft
+setting_version = 25
+type = intent
+variant = AA 0.8
+
+[values]
+acceleration_wall_0 = 2000
+gradual_flow_enabled = False
+gradual_infill_step_height = =4 * layer_height
+gradual_infill_steps = 3
+infill_sparse_density = 40
+jerk_print = 6000
+jerk_wall_0 = 6000
+speed_wall = =speed_print
+speed_wall_0 = 40
+top_bottom_thickness = =4 * layer_height
+wall_thickness = =wall_line_width_0
+

resources/intent/ultimaker_s8/um_s8_aa0.8_um-tough-pla_0.2mm_engineering.inst.cfg

@@ -0,0 +1,28 @@
+[general]
+definition = ultimaker_s8
+name = Accurate
+version = 4
+
+[metadata]
+intent_category = engineering
+material = ultimaker_tough_pla
+quality_type = draft
+setting_version = 25
+type = intent
+variant = AA 0.8
+
+[values]
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
+infill_sparse_density = 20
+jerk_print = 6000
+max_flow_acceleration = 1
+speed_infill = =speed_print
+speed_print = 35
+speed_roofing = =speed_topbottom
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 3
+

resources/intent/ultimaker_s8/um_s8_aa0.8_um-tough-pla_0.2mm_quick.inst.cfg

@@ -0,0 +1,26 @@
+[general]
+definition = ultimaker_s8
+name = Quick
+version = 4
+
+[metadata]
+intent_category = quick
+material = ultimaker_tough_pla
+quality_type = draft
+setting_version = 25
+type = intent
+variant = AA 0.8
+
+[values]
+acceleration_wall_0 = 2000
+gradual_flow_enabled = False
+gradual_infill_step_height = =4 * layer_height
+gradual_infill_steps = 3
+infill_sparse_density = 40
+jerk_print = 6000
+jerk_wall_0 = 6000
+speed_wall = =speed_print
+speed_wall_0 = 40
+top_bottom_thickness = =4 * layer_height
+wall_thickness = =wall_line_width_0
+

resources/intent/ultimaker_s8/um_s8_aa0.8_um-tough-pla_0.2mm_visual.inst.cfg

@@ -0,0 +1,26 @@
+[general]
+definition = ultimaker_s8
+name = Visual
+version = 4
+
+[metadata]
+intent_category = visual
+material = ultimaker_tough_pla
+quality_type = draft
+setting_version = 25
+type = intent
+variant = AA 0.8
+
+[values]
+acceleration_print = 2500
+acceleration_wall_0 = 1000
+inset_direction = inside_out
+jerk_wall_0 = 4000
+max_flow_acceleration = 0.5
+speed_print = 50
+speed_roofing = =math.ceil(speed_wall*(35/50))
+speed_wall_0 = =math.ceil(speed_wall*(20/50))
+speed_wall_x = =math.ceil(speed_wall*(35/50))
+top_bottom_thickness = =max(1.2 , layer_height * 6)
+z_seam_type = back
+

resources/intent/ultimaker_s8/um_s8_aa0.8_um-tough-pla_0.3mm_quick.inst.cfg

@@ -0,0 +1,26 @@
+[general]
+definition = ultimaker_s8
+name = Quick
+version = 4
+
+[metadata]
+intent_category = quick
+material = ultimaker_tough_pla
+quality_type = verydraft
+setting_version = 25
+type = intent
+variant = AA 0.8
+
+[values]
+acceleration_wall_0 = 2000
+gradual_flow_enabled = False
+gradual_infill_step_height = =4 * layer_height
+gradual_infill_steps = 3
+infill_sparse_density = 40
+jerk_print = 6000
+jerk_wall_0 = 6000
+speed_wall = =speed_print
+speed_wall_0 = 40
+top_bottom_thickness = =4 * layer_height
+wall_thickness = =wall_line_width_0
+

resources/intent/ultimaker_s8/um_s8_aa0.8_um-tough-pla_0.4mm_quick.inst.cfg

@@ -0,0 +1,26 @@
+[general]
+definition = ultimaker_s8
+name = Quick
+version = 4
+
+[metadata]
+intent_category = quick
+material = ultimaker_tough_pla
+quality_type = superdraft
+setting_version = 25
+type = intent
+variant = AA 0.8
+
+[values]
+acceleration_wall_0 = 2000
+gradual_flow_enabled = False
+gradual_infill_step_height = =4 * layer_height
+gradual_infill_steps = 3
+infill_sparse_density = 40
+jerk_print = 6000
+jerk_wall_0 = 6000
+speed_wall = =speed_print
+speed_wall_0 = 40
+top_bottom_thickness = =4 * layer_height
+wall_thickness = =wall_line_width_0
+

resources/intent/ultimaker_s8/um_s8_cc0.4_nylon-cf-slide_0.2mm_engineering.inst.cfg

@@ -0,0 +1,25 @@
+[general]
+definition = ultimaker_s8
+name = Accurate
+version = 4
+
+[metadata]
+intent_category = engineering
+is_experimental = True
+material = generic_nylon-cf-slide
+quality_type = draft
+setting_version = 25
+type = intent
+variant = CC 0.4
+
+[values]
+jerk_print = 6000
+speed_infill = =speed_print
+speed_print = 30
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 3
+

resources/intent/ultimaker_s8/um_s8_cc0.4_petcf_0.15mm_annealing.inst.cfg

@@ -0,0 +1,29 @@
+[general]
+definition = ultimaker_s8
+name = Annealing
+version = 4
+
+[metadata]
+intent_category = annealing
+material = generic_petcf
+quality_type = fast
+setting_version = 25
+type = intent
+variant = CC 0.4
+
+[values]
+infill_sparse_density = 100
+jerk_print = 6000
+material_shrinkage_percentage_xy = 100.3
+material_shrinkage_percentage_z = 100.9
+speed_infill = =speed_print
+speed_layer_0 = 20
+speed_print = 25
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+support_enable = True
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 3
+

resources/intent/ultimaker_s8/um_s8_cc0.4_petcf_0.15mm_engineering.inst.cfg

@@ -0,0 +1,24 @@
+[general]
+definition = ultimaker_s8
+name = Accurate
+version = 4
+
+[metadata]
+intent_category = engineering
+material = generic_petcf
+quality_type = fast
+setting_version = 25
+type = intent
+variant = CC 0.4
+
+[values]
+jerk_print = 6000
+speed_infill = =speed_print
+speed_print = 25
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 3
+

resources/intent/ultimaker_s8/um_s8_cc0.4_petcf_0.2mm_annealing.inst.cfg

@@ -0,0 +1,29 @@
+[general]
+definition = ultimaker_s8
+name = Annealing
+version = 4
+
+[metadata]
+intent_category = annealing
+material = generic_petcf
+quality_type = draft
+setting_version = 25
+type = intent
+variant = CC 0.4
+
+[values]
+infill_sparse_density = 100
+jerk_print = 6000
+material_shrinkage_percentage_xy = 100.3
+material_shrinkage_percentage_z = 100.9
+speed_infill = =speed_print
+speed_layer_0 = 20
+speed_print = 20
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+support_enable = True
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 3
+

resources/intent/ultimaker_s8/um_s8_cc0.4_petcf_0.2mm_engineering.inst.cfg

@@ -0,0 +1,24 @@
+[general]
+definition = ultimaker_s8
+name = Accurate
+version = 4
+
+[metadata]
+intent_category = engineering
+material = generic_petcf
+quality_type = draft
+setting_version = 25
+type = intent
+variant = CC 0.4
+
+[values]
+jerk_print = 6000
+speed_infill = =speed_print
+speed_print = 20
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 3
+

resources/intent/ultimaker_s8/um_s8_cc0.6_nylon-cf-slide_0.2mm_engineering.inst.cfg

@@ -0,0 +1,24 @@
+[general]
+definition = ultimaker_s8
+name = Accurate
+version = 4
+
+[metadata]
+intent_category = engineering
+material = generic_nylon-cf-slide
+quality_type = draft
+setting_version = 25
+type = intent
+variant = CC 0.6
+
+[values]
+jerk_print = 6000
+speed_infill = =speed_print
+speed_print = 30
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 3
+

resources/intent/ultimaker_s8/um_s8_cc0.6_petcf_0.15mm_annealing.inst.cfg

@@ -0,0 +1,29 @@
+[general]
+definition = ultimaker_s8
+name = Annealing
+version = 4
+
+[metadata]
+intent_category = annealing
+material = generic_petcf
+quality_type = fast
+setting_version = 25
+type = intent
+variant = CC 0.6
+
+[values]
+infill_sparse_density = 100
+jerk_print = 6000
+material_shrinkage_percentage_xy = 100.3
+material_shrinkage_percentage_z = 100.9
+speed_infill = =speed_print
+speed_layer_0 = 20
+speed_print = 25
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+support_enable = True
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 3
+

resources/intent/ultimaker_s8/um_s8_cc0.6_petcf_0.15mm_engineering.inst.cfg

@@ -0,0 +1,24 @@
+[general]
+definition = ultimaker_s8
+name = Accurate
+version = 4
+
+[metadata]
+intent_category = engineering
+material = generic_petcf
+quality_type = fast
+setting_version = 25
+type = intent
+variant = CC 0.6
+
+[values]
+jerk_print = 6000
+speed_infill = =speed_print
+speed_print = 25
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 3
+

resources/intent/ultimaker_s8/um_s8_cc0.6_petcf_0.2mm_annealing.inst.cfg

@@ -0,0 +1,29 @@
+[general]
+definition = ultimaker_s8
+name = Annealing
+version = 4
+
+[metadata]
+intent_category = annealing
+material = generic_petcf
+quality_type = draft
+setting_version = 25
+type = intent
+variant = CC 0.6
+
+[values]
+infill_sparse_density = 100
+jerk_print = 6000
+material_shrinkage_percentage_xy = 100.3
+material_shrinkage_percentage_z = 100.9
+speed_infill = =speed_print
+speed_layer_0 = 20
+speed_print = 25
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+support_enable = True
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 3
+

resources/intent/ultimaker_s8/um_s8_cc0.6_petcf_0.2mm_engineering.inst.cfg

@@ -0,0 +1,24 @@
+[general]
+definition = ultimaker_s8
+name = Accurate
+version = 4
+
+[metadata]
+intent_category = engineering
+material = generic_petcf
+quality_type = draft
+setting_version = 25
+type = intent
+variant = CC 0.6
+
+[values]
+jerk_print = 6000
+speed_infill = =speed_print
+speed_print = 25
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 3
+

resources/quality/ultimaker_s8/um_s8_aa0.25_abs_0.1mm.inst.cfg

@@ -0,0 +1,22 @@
+[general]
+definition = ultimaker_s8
+name = Fine
+version = 4
+
+[metadata]
+material = generic_abs
+quality_type = normal
+setting_version = 25
+type = quality
+variant = AA 0.25
+weight = 0
+
+[values]
+cool_fan_speed_0 = 0
+material_print_temperature = =default_material_print_temperature - 20
+speed_topbottom = =math.ceil(speed_print * 30 / 55)
+support_bottom_distance = =support_z_distance
+support_interface_enable = True
+support_top_distance = =support_z_distance
+support_z_distance = =math.ceil(0.3/layer_height)*layer_height
+

resources/quality/ultimaker_s8/um_s8_aa0.25_cpe_0.1mm.inst.cfg

@@ -0,0 +1,23 @@
+[general]
+definition = ultimaker_s8
+name = Fine
+version = 4
+
+[metadata]
+material = generic_cpe
+quality_type = normal
+setting_version = 25
+type = quality
+variant = AA 0.25
+weight = 0
+
+[values]
+material_print_temperature = =default_material_print_temperature - 15
+speed_infill = =math.ceil(speed_print * 40 / 55)
+speed_topbottom = =math.ceil(speed_print * 30 / 55)
+support_bottom_distance = =support_z_distance
+support_interface_enable = True
+support_top_distance = =support_z_distance
+support_z_distance = =math.ceil(0.3/layer_height)*layer_height
+top_bottom_thickness = 0.8
+

resources/quality/ultimaker_s8/um_s8_aa0.25_nylon_0.1mm.inst.cfg

@@ -0,0 +1,30 @@
+[general]
+definition = ultimaker_s8
+name = Fine
+version = 4
+
+[metadata]
+material = generic_nylon
+quality_type = normal
+setting_version = 25
+type = quality
+variant = AA 0.25
+weight = 0
+
+[values]
+machine_nozzle_cool_down_speed = 0.9
+machine_nozzle_heat_up_speed = 1.4
+material_print_temperature = =default_material_print_temperature - 20
+ooze_shield_angle = 40
+raft_airgap = 0.4
+speed_print = 70
+speed_topbottom = =math.ceil(speed_print * 30 / 70)
+speed_wall = =math.ceil(speed_print * 30 / 70)
+support_bottom_distance = =support_z_distance
+support_interface_enable = True
+support_top_distance = =support_z_distance
+support_z_distance = =math.ceil(0.3/layer_height)*layer_height
+switch_extruder_prime_speed = 30
+switch_extruder_retraction_amount = 30
+switch_extruder_retraction_speeds = 40
+

resources/quality/ultimaker_s8/um_s8_aa0.25_pc_0.1mm.inst.cfg

@@ -0,0 +1,41 @@
+[general]
+definition = ultimaker_s8
+name = Fine - Experimental
+version = 4
+
+[metadata]
+is_experimental = True
+material = generic_pc
+quality_type = normal
+setting_version = 25
+type = quality
+variant = AA 0.25
+weight = 0
+
+[values]
+brim_width = 20
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
+infill_wipe_dist = 0.1
+machine_min_cool_heat_time_window = 15
+material_print_temperature = =default_material_print_temperature - 10
+multiple_mesh_overlap = 0
+ooze_shield_angle = 40
+prime_tower_enable = True
+prime_tower_wipe_enabled = True
+raft_airgap = 0.25
+retraction_hop = 2
+retraction_hop_only_when_collides = True
+speed_print = 50
+speed_topbottom = =math.ceil(speed_print * 25 / 50)
+speed_wall = =math.ceil(speed_print * 40 / 50)
+speed_wall_0 = =math.ceil(speed_wall * 25 / 40)
+support_bottom_distance = =support_z_distance
+support_interface_density = 87.5
+support_interface_enable = True
+support_top_distance = =support_z_distance
+support_z_distance = =math.ceil(0.3/layer_height)*layer_height
+switch_extruder_prime_speed = 15
+switch_extruder_retraction_amount = 20
+switch_extruder_retraction_speeds = 35
+wall_0_inset = 0
+