diff --git a/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py b/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py
index 10c2f1c9b4..77d7995fc7 100644
--- a/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py
+++ b/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py
@@ -1,26 +1,39 @@
 # Copyright (c) 2019 Ultimaker B.V.
 # Cura is released under the terms of the LGPLv3 or higher.
+from typing import TYPE_CHECKING
+
+from PyQt5.QtCore import QUrl
+from PyQt5.QtGui import QDesktopServices
+
 from UM import i18nCatalog
 from UM.Message import Message
 
 
+if TYPE_CHECKING:
+    from ..UltimakerNetworkedPrinterOutputDevice import UltimakerNetworkedPrinterOutputDevice
+
+
 I18N_CATALOG = i18nCatalog("cura")
 
 
 ## Message shown when trying to connect to a printer that is not a host.
 class NotClusterHostMessage(Message):
-    
+
     # Singleton used to prevent duplicate messages of this type at the same time.
     __is_visible = False
-    
-    def __init__(self) -> None:
+
+    def __init__(self, device: "UltimakerNetworkedPrinterOutputDevice") -> None:
         super().__init__(
-            text = I18N_CATALOG.i18nc("@info:status", "You are attempting to connect to a printer that is not "
-                                                      "the host of an Ultimaker Connect group. Please connect to "
-                                                      "the host instead."),
-            title = I18N_CATALOG.i18nc("@info:title", "Not a cluster host"),
-            lifetime = 10
+            text = I18N_CATALOG.i18nc("@info:status", "You are attempting to connect to {0} but it is not "
+                                                      "the host of a group. You can visit the web page to configure "
+                                                      "it as a group host.", device.name),
+            title = I18N_CATALOG.i18nc("@info:title", "Not a group host"),
+            lifetime = 0,
+            dismissable = True
         )
+        self._address = device.address
+        self.addAction("", I18N_CATALOG.i18nc("@action", "Configure group"), "", "")
+        self.actionTriggered.connect(self._onConfigureClicked)
 
     def show(self) -> None:
         if NotClusterHostMessage.__is_visible:
@@ -31,3 +44,7 @@ class NotClusterHostMessage(Message):
     def hide(self, send_signal = True) -> None:
         super().hide(send_signal)
         NotClusterHostMessage.__is_visible = False
+
+    def _onConfigureClicked(self, messageId: str, actionId: str) -> None:
+        QDesktopServices.openUrl(QUrl("http://{}/print_jobs".format(self._address)))
+        self.hide()
diff --git a/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py b/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py
index ff704945eb..59c1b47076 100644
--- a/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py
+++ b/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py
@@ -45,6 +45,9 @@ class LocalClusterOutputDevice(UltimakerNetworkedPrinterOutputDevice):
         self._setInterfaceElements()
         self._active_camera_url = QUrl()  # type: QUrl
 
+        # Get the cluster configuration at least once to check if it is a host.
+        self._update()
+
     ##  Set all the interface elements and texts for this output device.
     def _setInterfaceElements(self) -> None:
         self.setPriority(3)  # Make sure the output device gets selected above local file output
diff --git a/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDeviceManager.py b/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDeviceManager.py
index 0b7157c29e..efb529faa7 100644
--- a/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDeviceManager.py
+++ b/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDeviceManager.py
@@ -215,11 +215,6 @@ class LocalClusterOutputDeviceManager:
             LegacyDeviceNoLongerSupportedMessage().show()
             return
 
-        # Tell the user that they cannot connect to a non-host printer.
-        if device.clusterSize < 1:
-            NotClusterHostMessage().show()
-            return
-
         device.connect()
         machine.addConfiguredConnectionType(device.connectionType.value)
         CuraApplication.getInstance().getOutputDeviceManager().addOutputDevice(device)
diff --git a/plugins/UM3NetworkPrinting/src/UltimakerNetworkedPrinterOutputDevice.py b/plugins/UM3NetworkPrinting/src/UltimakerNetworkedPrinterOutputDevice.py
index 8feb058b83..b310fa90f5 100644
--- a/plugins/UM3NetworkPrinting/src/UltimakerNetworkedPrinterOutputDevice.py
+++ b/plugins/UM3NetworkPrinting/src/UltimakerNetworkedPrinterOutputDevice.py
@@ -15,6 +15,7 @@ from cura.PrinterOutput.PrinterOutputDevice import ConnectionType
 from .Utils import formatTimeCompleted, formatDateCompleted
 from .ClusterOutputController import ClusterOutputController
 from .Messages.PrintJobUploadProgressMessage import PrintJobUploadProgressMessage
+from .Messages.NotClusterHostMessage import NotClusterHostMessage
 from .Models.UM3PrintJobOutputModel import UM3PrintJobOutputModel
 from .Models.Http.ClusterPrinterStatus import ClusterPrinterStatus
 from .Models.Http.ClusterPrintJobStatus import ClusterPrintJobStatus
@@ -95,7 +96,7 @@ class UltimakerNetworkedPrinterOutputDevice(NetworkedPrinterOutputDevice):
     # Get the amount of printers in the cluster.
     @pyqtProperty(int, notify=_clusterPrintersChanged)
     def clusterSize(self) -> int:
-        return max(1, len(self._printers))
+        return len(self._printers)
 
     # Get the amount of printer in the cluster per type.
     @pyqtProperty("QVariantList", notify=_clusterPrintersChanged)
@@ -190,6 +191,9 @@ class UltimakerNetworkedPrinterOutputDevice(NetworkedPrinterOutputDevice):
             return
         self._monitor_view_qml_path = os.path.join(plugin_path, "resources", "qml", "MonitorStage.qml")
 
+    def _update(self):
+        super()._update()
+
     def _updatePrinters(self, remote_printers: List[ClusterPrinterStatus]) -> None:
 
         # Keep track of the new printers to show.
@@ -212,6 +216,13 @@ class UltimakerNetworkedPrinterOutputDevice(NetworkedPrinterOutputDevice):
             if self._active_printer and self._active_printer.key == removed_printer.key:
                 self.setActivePrinter(None)
 
+        # Check if this is actually a group host.
+        if len(new_printers) < 1 and self.isConnected():
+            NotClusterHostMessage(self).show()
+            self.close()
+            CuraApplication.getInstance().getOutputDeviceManager().removeOutputDevice(self.key)
+            return
+
         self._printers = new_printers
         if self._printers and not self.activePrinter:
             self.setActivePrinter(self._printers[0])