Add a setting to change secondary fan speed

plugins/BlackBeltPlugin/BlackBeltPlugin.py

@@ -253,6 +253,13 @@ class BlackBeltPlugin(Extension):
     def _filterGcode(self, output_device):
         global_stack = Application.getInstance().getGlobalContainerStack()
 
+        scene = Application.getInstance().getController().getScene()
+        gcode_dict = getattr(scene, "gcode_dict", {})
+        if not gcode_dict: # this also checks for an empty dict
+            Logger.log("w", "Scene has no gcode to process")
+            return
+        dict_changed = False
+
         enable_secondary_fans = global_stack.extruders["0"].getProperty("blackbelt_secondary_fans_enabled", "value")
         repetitions = global_stack.getProperty("blackbelt_repetitions", "value") or 1
         enable_belt_wall = global_stack.getProperty("blackbelt_belt_wall_enabled", "value")
@@ -260,32 +267,28 @@ class BlackBeltPlugin(Extension):
         if not (enable_secondary_fans or enable_belt_wall or repetitions > 1):
             return
 
-        belt_wall_flow = global_stack.getProperty("blackbelt_belt_wall_flow", "value") / 100
-        belt_wall_speed = global_stack.getProperty("blackbelt_belt_wall_speed", "value") * 60
-        minimum_y = global_stack.extruders["0"].getProperty("wall_line_width_0", "value") / 2
+        if enable_secondary_fans:
+            secondary_fans_speed = global_stack.extruders["0"].getProperty("blackbelt_secondary_fans_speed", "value") / 100
 
-        repetitions_distance = global_stack.getProperty("blackbelt_repetitions_distance", "value")
-        repetitions_gcode = global_stack.getProperty("blackbelt_repetitions_gcode", "value")
+        if enable_belt_wall:
+            belt_wall_flow = global_stack.getProperty("blackbelt_belt_wall_flow", "value") / 100
+            belt_wall_speed = global_stack.getProperty("blackbelt_belt_wall_speed", "value") * 60
+            minimum_y = global_stack.extruders["0"].getProperty("wall_line_width_0", "value") / 2
 
-        scene = Application.getInstance().getController().getScene()
-        gcode_dict = getattr(scene, "gcode_dict", {})
-        if not gcode_dict: # this also checks for an empty dict
-            Logger.log("w", "Scene has no gcode to process")
-            return
-
-        dict_changed = False
+        if repetitions > 1:
+            repetitions_distance = global_stack.getProperty("blackbelt_repetitions_distance", "value")
+            repetitions_gcode = global_stack.getProperty("blackbelt_repetitions_gcode", "value")
 
         for plate_id in gcode_dict:
             gcode_list = gcode_dict[plate_id]
             if gcode_list:
                 if ";BLACKBELTPROCESSED" not in gcode_list[0]:
-                    # secondary fans should do the same as print cooling fans
+                    # secondary fans should similar things as print cooling fans
                     if enable_secondary_fans:
                         search_regex = re.compile(r"M106 S(\d*\.?\d*)")
-                        replace_pattern = r"M106 P1 S\1\nM106 S\1"
 
                         for layer_number, layer in enumerate(gcode_list):
-                            gcode_list[layer_number] = re.sub(search_regex, replace_pattern, layer) #Replace all.
+                            gcode_list[layer_number] = re.sub(search_regex, lambda m: "M106 P1 S%d\nM106 S%s" % (int(min(255, float(m.group(1)) * secondary_fans_speed)), m.group(1)), layer) #Replace all.
 
                     # adjust walls that touch the belt
                     if enable_belt_wall:

resources/definitions/blackbelt.def.json

@@ -201,12 +201,25 @@
                 "blackbelt_secondary_fans_enabled":
                 {
                     "label": "Enable Secondary Print Fans",
-                    "description": "Enables the secondary print cooling fans while printing. The secondary fans are set to the same speed as the primary cooling fan.",
+                    "description": "Enables the secondary print cooling fans while printing.",
                     "type": "bool",
                     "enabled": "cool_fan_enabled",
                     "default_value": false,
                     "settable_per_mesh": false,
                     "settable_per_extruder": true
+                },
+                "blackbelt_secondary_fans_speed":
+                {
+                    "label": "Secondary Print Fan Speed",
+                    "description": "The speed at which the secondary print cooling fans spin. The secondary fans speed is relative to the primary cooling fan speed.",
+                    "type": "float",
+                    "enabled": "blackbelt_secondary_fans_enabled",
+                    "unit": "%",
+                    "type": "float",
+                    "minimum_value": "0",
+                    "default_value": 100,
+                    "settable_per_mesh": false,
+                    "settable_per_extruder": true
                 }
             }
         },

resources/setting_visibility/blackbelt.cfg

@@ -17,6 +17,7 @@ blackbelt_belt_wall_speed
 blackbelt_belt_wall_flow
 blackbelt_z_offset_gap
 blackbelt_secondary_fans_enabled
+blackbelt_secondary_fans_speed
 
 [resolution]
 layer_height