Adding_Hips_Profiles

resources/quality/strateo3d/Standard_0.4/s3d_std0.4_HIPS_A.inst.cfg

@@ -0,0 +1,48 @@
+[general]
+version = 4
+name = A
+definition = strateo3d
+
+[metadata]
+setting_version = 10
+type = quality
+quality_type = a
+weight = 1
+material = emotiontech_hips
+variant = Standard 0.4
+
+[values]
+layer_height_0 = =round(0.5*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.4
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.4
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.4
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 40
+speed_wall = =math.ceil(speed_print * 30/40)
+speed_wall_0 = =math.ceil(speed_wall * 30/40)
+speed_topbottom = =math.ceil(speed_print * 20/40)
+speed_layer_0 = =math.ceil(speed_print * 20/40)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 50
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 14 * layer_height
+cool_min_speed = 10
+support_angle = 55
+material_print_temperature = =default_material_print_temperature
+material_print_temperature_layer_0 = =default_material_print_temperature
+material_flow = 97
+retraction_extra_prime_amount = 0.1
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 10
+support_z_distance = =layer_height-layer_height
+support_bottom_distance = =support_z_distance
+support_xy_distance = =line_width*3/4
+support_xy_distance_overhang = =line_width*0.175/line_width
+support_offset = 3
+support_pattern = grid
+support_interface_density = 100
+prime_tower_enable = True

resources/quality/strateo3d/Standard_0.4/s3d_std0.4_HIPS_B.inst.cfg

@@ -0,0 +1,48 @@
+[general]
+version = 4
+name = B
+definition = strateo3d
+
+[metadata]
+setting_version = 10
+type = quality
+quality_type = b
+weight = 0
+material = emotiontech_hips
+variant = Standard 0.4
+
+[values]
+layer_height_0 = =round(0.67*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.4
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.4
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.4
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 40
+speed_wall = =math.ceil(speed_print * 30/40)
+speed_wall_0 = =math.ceil(speed_wall * 30/40)
+speed_topbottom = =math.ceil(speed_print * 20/40)
+speed_layer_0 = =math.ceil(speed_print * 20/40)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 50
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 9 * layer_height
+cool_min_speed = 10
+support_angle = 55
+material_print_temperature = =default_material_print_temperature + 3
+material_print_temperature_layer_0 = =default_material_print_temperature
+material_flow = 97
+retraction_extra_prime_amount = 0.1
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 15
+support_z_distance = =layer_height-layer_height
+support_bottom_distance = =support_z_distance
+support_xy_distance = =line_width*3/4
+support_xy_distance_overhang = ==line_width*0.175/line_width
+support_offset = 3
+support_pattern = grid
+support_interface_density = 100
+prime_tower_enable = True

resources/quality/strateo3d/Standard_0.4/s3d_std0.4_HIPS_C.inst.cfg

@@ -0,0 +1,48 @@
+[general]
+version = 4
+name = C
+definition = strateo3d
+
+[metadata]
+setting_version = 10
+type = quality
+quality_type = c
+weight = -1
+material = emotiontech_hips
+variant = Standard 0.4
+
+[values]
+layer_height_0 = =round(0.75*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.4
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.4
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.4
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 40
+speed_wall = =math.ceil(speed_print * 30/40)
+speed_wall_0 = =math.ceil(speed_wall * 30/40)
+speed_topbottom = =math.ceil(speed_print * 20/40)
+speed_layer_0 = =math.ceil(speed_print * 20/40)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 50
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 19 * layer_height
+cool_min_speed = 10
+support_angle = 55
+material_print_temperature = =default_material_print_temperature + 5
+material_print_temperature_layer_0 = =default_material_print_temperature
+material_flow = 97
+retraction_extra_prime_amount = 0.1
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 20
+support_z_distance = =layer_height-layer_height
+support_bottom_distance = =support_z_distance
+support_xy_distance = =line_width*3/4
+support_xy_distance_overhang = =line_width*0.175/line_width
+support_offset = 3
+support_pattern = grid
+support_interface_density = 100
+prime_tower_enable = True

resources/quality/strateo3d/Standard_0.6/s3d_std0.6_HIPS_B.inst.cfg

@@ -0,0 +1,48 @@
+[general]
+version = 4
+name = B
+definition = strateo3d
+
+[metadata]
+setting_version = 10
+type = quality
+quality_type = b
+weight = 1
+material = emotiontech_hips
+variant = Standard 0.6
+
+[values]
+layer_height_0 = =round(0.5*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.6
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.6
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.6
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 40
+speed_wall = =math.ceil(speed_print * 30/40)
+speed_wall_0 = =math.ceil(speed_wall * 30/40)
+speed_topbottom = =math.ceil(speed_print * 20/40)
+speed_layer_0 = =math.ceil(speed_print * 20/40)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 50
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 9 * layer_height
+cool_min_speed = 10
+support_angle = 50
+material_print_temperature = =default_material_print_temperature
+material_print_temperature_layer_0 = =default_material_print_temperature
+material_flow = 95
+retraction_extra_prime_amount = 0.1
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 10
+support_z_distance = =layer_height-layer_height
+support_bottom_distance = =support_z_distance
+support_xy_distance = =line_width * 0.75
+support_xy_distance_overhang = =line_width*0.175/line_width
+support_offset = 3
+support_pattern = grid
+support_interface_density = 100
+prime_tower_enable = True

resources/quality/strateo3d/Standard_0.6/s3d_std0.6_HIPS_C.inst.cfg

@@ -0,0 +1,48 @@
+[general]
+version = 4
+name = C
+definition = strateo3d
+
+[metadata]
+setting_version = 10
+type = quality
+quality_type = c
+weight = 0
+material = emotiontech_hips
+variant = Standard 0.6
+
+[values]
+layer_height_0 = =round(0.67*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.6
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.6
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.6
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 40
+speed_wall = =math.ceil(speed_print * 30/40)
+speed_wall_0 = =math.ceil(speed_wall * 30/40)
+speed_topbottom = =math.ceil(speed_print * 20/40)
+speed_layer_0 = =math.ceil(speed_print * 20/40)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 50
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 9 * layer_height
+cool_min_speed = 10
+support_angle = 50
+material_print_temperature = =default_material_print_temperature + 3
+material_print_temperature_layer_0 = =default_material_print_temperature
+material_flow = 95
+retraction_extra_prime_amount = 0.1
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 10
+support_z_distance = =layer_height-layer_height
+support_bottom_distance = =support_z_distance
+support_xy_distance = =line_width * 0.75
+support_xy_distance_overhang = =line_width*0.175/line_width
+support_offset = 3
+support_pattern = grid
+support_interface_density = 100
+prime_tower_enable = True

resources/quality/strateo3d/Standard_0.6/s3d_std0.6_HIPS_D.inst.cfg

@@ -0,0 +1,48 @@
+[general]
+version = 4
+name = D
+definition = strateo3d
+
+[metadata]
+setting_version = 10
+type = quality
+quality_type = d
+weight = -1
+material = emotiontech_hips
+variant = Standard 0.6
+
+[values]
+layer_height_0 = =round(0.75*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.6
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.6
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.6
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 40
+speed_wall = =math.ceil(speed_print * 30/40)
+speed_wall_0 = =math.ceil(speed_wall * 30/40)
+speed_topbottom = =math.ceil(speed_print * 20/40)
+speed_layer_0 = =math.ceil(speed_print * 20/40)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 50
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 9 * layer_height
+cool_min_speed = 10
+support_angle = 50
+material_print_temperature = =default_material_print_temperature + 5
+material_print_temperature_layer_0 = =default_material_print_temperature
+material_flow = 95
+retraction_extra_prime_amount = 0.1
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 10
+support_z_distance = =layer_height-layer_height
+support_bottom_distance = =support_z_distance
+support_xy_distance = =line_width * 0.75
+support_xy_distance_overhang = =line_width*0.175/line_width
+support_offset = 3
+support_pattern = grid
+support_interface_density = 100
+prime_tower_enable = True