mirror of
https://github.com/Ultimaker/Cura.git
synced 2025-08-09 23:05:01 -06:00
Merge branch 'master' into default_union_off_for_surface_mode
This commit is contained in:
Lipu Fei
GitHub
commit
820925c9aa
1772 changed files with 19338 additions and 14934 deletions
|
|
@ -6,7 +6,7 @@
|
|||
"display_name": "3MF Reader",
|
||||
"description": "Provides support for reading 3MF files.",
|
||||
"package_version": "1.0.1",
|
||||
"sdk_version": "6.0.0",
|
||||
"sdk_version": "7.0.0",
|
||||
"website": "https://ultimaker.com",
|
||||
"author": {
|
||||
"author_id": "UltimakerPackages",
|
||||
|
|
@ -23,7 +23,7 @@
|
|||
"display_name": "3MF Writer",
|
||||
"description": "Provides support for writing 3MF files.",
|
||||
"package_version": "1.0.1",
|
||||
"sdk_version": "6.0.0",
|
||||
"sdk_version": "7.0.0",
|
||||
"website": "https://ultimaker.com",
|
||||
"author": {
|
||||
"author_id": "UltimakerPackages",
|
||||
|
|
@ -40,7 +40,7 @@
|
|||
"display_name": "AMF Reader",
|
||||
"description": "Provides support for reading AMF files.",
|
||||
"package_version": "1.0.0",
|
||||
"sdk_version": "6.0.0",
|
||||
"sdk_version": "7.0.0",
|
||||
"website": "https://ultimaker.com",
|
||||
"author": {
|
||||
"author_id": "fieldOfView",
|
||||
|
|
@ -57,7 +57,7 @@
|
|||
"display_name": "Cura Backups",
|
||||
"description": "Backup and restore your configuration.",
|
||||
"package_version": "1.2.0",
|
||||
"sdk_version": "6.0.0",
|
||||
"sdk_version": "7.0.0",
|
||||
"website": "https://ultimaker.com",
|
||||
"author": {
|
||||
"author_id": "UltimakerPackages",
|
||||
|
|
@ -74,7 +74,7 @@
|
|||
"display_name": "CuraEngine Backend",
|
||||
"description": "Provides the link to the CuraEngine slicing backend.",
|
||||
"package_version": "1.0.1",
|
||||
"sdk_version": "6.0.0",
|
||||
"sdk_version": "7.0.0",
|
||||
"website": "https://ultimaker.com",
|
||||
"author": {
|
||||
"author_id": "UltimakerPackages",
|
||||
|
|
@ -91,7 +91,7 @@
|
|||
"display_name": "Cura Profile Reader",
|
||||
"description": "Provides support for importing Cura profiles.",
|
||||
"package_version": "1.0.1",
|
||||
"sdk_version": "6.0.0",
|
||||
"sdk_version": "7.0.0",
|
||||
"website": "https://ultimaker.com",
|
||||
"author": {
|
||||
"author_id": "UltimakerPackages",
|
||||
|
|
@ -108,7 +108,7 @@
|
|||
"display_name": "Cura Profile Writer",
|
||||
"description": "Provides support for exporting Cura profiles.",
|
||||
"package_version": "1.0.1",
|
||||
"sdk_version": "6.0.0",
|
||||
"sdk_version": "7.0.0",
|
||||
"website": "https://ultimaker.com",
|
||||
"author": {
|
||||
"author_id": "UltimakerPackages",
|
||||
|
|
@ -125,7 +125,7 @@
|
|||
"display_name": "Firmware Update Checker",
|
||||
"description": "Checks for firmware updates.",
|
||||
"package_version": "1.0.1",
|
||||
"sdk_version": "6.0.0",
|
||||
"sdk_version": "7.0.0",
|
||||
"website": "https://ultimaker.com",
|
||||
"author": {
|
||||
"author_id": "UltimakerPackages",
|
||||
|
|
@ -142,7 +142,7 @@
|
|||
"display_name": "Firmware Updater",
|
||||
"description": "Provides a machine actions for updating firmware.",
|
||||
"package_version": "1.0.1",
|
||||
"sdk_version": "6.0.0",
|
||||
"sdk_version": "7.0.0",
|
||||
"website": "https://ultimaker.com",
|
||||
"author": {
|
||||
"author_id": "UltimakerPackages",
|
||||
|
|
@ -159,7 +159,7 @@
|
|||
"display_name": "Compressed G-code Reader",
|
||||
"description": "Reads g-code from a compressed archive.",
|
||||
"package_version": "1.0.1",
|
||||
"sdk_version": "6.0.0",
|
||||
"sdk_version": "7.0.0",
|
||||
"website": "https://ultimaker.com",
|
||||
"author": {
|
||||
"author_id": "UltimakerPackages",
|
||||
|
|
@ -176,7 +176,7 @@
|
|||
"display_name": "Compressed G-code Writer",
|
||||
"description": "Writes g-code to a compressed archive.",
|
||||
"package_version": "1.0.1",
|
||||
"sdk_version": "6.0.0",
|
||||
"sdk_version": "7.0.0",
|
||||
"website": "https://ultimaker.com",
|
||||
"author": {
|
||||
"author_id": "UltimakerPackages",
|
||||
|
|
@ -193,7 +193,7 @@
|
|||
"display_name": "G-Code Profile Reader",
|
||||
"description": "Provides support for importing profiles from g-code files.",
|
||||
"package_version": "1.0.1",
|
||||
"sdk_version": "6.0.0",
|
||||
"sdk_version": "7.0.0",
|
||||
"website": "https://ultimaker.com",
|
||||
"author": {
|
||||
"author_id": "UltimakerPackages",
|
||||
|
|
@ -210,7 +210,7 @@
|
|||
"display_name": "G-Code Reader",
|
||||
"description": "Allows loading and displaying G-code files.",
|
||||
"package_version": "1.0.1",
|
||||
"sdk_version": "6.0.0",
|
||||
"sdk_version": "7.0.0",
|
||||
"website": "https://ultimaker.com",
|
||||
"author": {
|
||||
"author_id": "VictorLarchenko",
|
||||
|
|
@ -227,7 +227,7 @@
|
|||
"display_name": "G-Code Writer",
|
||||
"description": "Writes g-code to a file.",
|
||||
"package_version": "1.0.1",
|
||||
"sdk_version": "6.0.0",
|
||||
"sdk_version": "7.0.0",
|
||||
"website": "https://ultimaker.com",
|
||||
"author": {
|
||||
"author_id": "UltimakerPackages",
|
||||
|
|
@ -244,7 +244,7 @@
|
|||
"display_name": "Image Reader",
|
||||
"description": "Enables ability to generate printable geometry from 2D image files.",
|
||||
"package_version": "1.0.1",
|
||||
"sdk_version": "6.0.0",
|
||||
"sdk_version": "7.0.0",
|
||||
"website": "https://ultimaker.com",
|
||||
"author": {
|
||||
"author_id": "UltimakerPackages",
|
||||
|
|
@ -261,7 +261,7 @@
|
|||
"display_name": "Legacy Cura Profile Reader",
|
||||
"description": "Provides support for importing profiles from legacy Cura versions.",
|
||||
"package_version": "1.0.1",
|
||||
"sdk_version": "6.0.0",
|
||||
"sdk_version": "7.0.0",
|
||||
"website": "https://ultimaker.com",
|
||||
"author": {
|
||||
"author_id": "UltimakerPackages",
|
||||
|
|
@ -278,7 +278,7 @@
|
|||
"display_name": "Machine Settings Action",
|
||||
"description": "Provides a way to change machine settings (such as build volume, nozzle size, etc.).",
|
||||
"package_version": "1.0.1",
|
||||
"sdk_version": "6.0.0",
|
||||
"sdk_version": "7.0.0",
|
||||
"website": "https://ultimaker.com",
|
||||
"author": {
|
||||
"author_id": "fieldOfView",
|
||||
|
|
@ -295,7 +295,7 @@
|
|||
"display_name": "Model Checker",
|
||||
"description": "Checks models and print configuration for possible printing issues and give suggestions.",
|
||||
"package_version": "1.0.1",
|
||||
"sdk_version": "6.0.0",
|
||||
"sdk_version": "7.0.0",
|
||||
"website": "https://ultimaker.com",
|
||||
"author": {
|
||||
"author_id": "UltimakerPackages",
|
||||
|
|
@ -312,7 +312,7 @@
|
|||
"display_name": "Monitor Stage",
|
||||
"description": "Provides a monitor stage in Cura.",
|
||||
"package_version": "1.0.1",
|
||||
"sdk_version": "6.0.0",
|
||||
"sdk_version": "7.0.0",
|
||||
"website": "https://ultimaker.com",
|
||||
"author": {
|
||||
"author_id": "UltimakerPackages",
|
||||
|
|
@ -329,7 +329,7 @@
|
|||
"display_name": "Per-Object Settings Tool",
|
||||
"description": "Provides the per-model settings.",
|
||||
"package_version": "1.0.1",
|
||||
"sdk_version": "6.0.0",
|
||||
"sdk_version": "7.0.0",
|
||||
"website": "https://ultimaker.com",
|
||||
"author": {
|
||||
"author_id": "UltimakerPackages",
|
||||
|
|
@ -346,7 +346,7 @@
|
|||
"display_name": "Post Processing",
|
||||
"description": "Extension that allows for user created scripts for post processing.",
|
||||
"package_version": "2.2.1",
|
||||
"sdk_version": "6.0.0",
|
||||
"sdk_version": "7.0.0",
|
||||
"website": "https://ultimaker.com",
|
||||
"author": {
|
||||
"author_id": "UltimakerPackages",
|
||||
|
|
@ -363,7 +363,7 @@
|
|||
"display_name": "Prepare Stage",
|
||||
"description": "Provides a prepare stage in Cura.",
|
||||
"package_version": "1.0.1",
|
||||
"sdk_version": "6.0.0",
|
||||
"sdk_version": "7.0.0",
|
||||
"website": "https://ultimaker.com",
|
||||
"author": {
|
||||
"author_id": "UltimakerPackages",
|
||||
|
|
@ -380,7 +380,7 @@
|
|||
"display_name": "Preview Stage",
|
||||
"description": "Provides a preview stage in Cura.",
|
||||
"package_version": "1.0.1",
|
||||
"sdk_version": "6.0.0",
|
||||
"sdk_version": "7.0.0",
|
||||
"website": "https://ultimaker.com",
|
||||
"author": {
|
||||
"author_id": "UltimakerPackages",
|
||||
|
|
@ -397,7 +397,7 @@
|
|||
"display_name": "Removable Drive Output Device",
|
||||
"description": "Provides removable drive hotplugging and writing support.",
|
||||
"package_version": "1.0.1",
|
||||
"sdk_version": "6.0.0",
|
||||
"sdk_version": "7.0.0",
|
||||
"website": "https://ultimaker.com",
|
||||
"author": {
|
||||
"author_id": "UltimakerPackages",
|
||||
|
|
@ -414,7 +414,7 @@
|
|||
"display_name": "Simulation View",
|
||||
"description": "Provides the Simulation view.",
|
||||
"package_version": "1.0.1",
|
||||
"sdk_version": "6.0.0",
|
||||
"sdk_version": "7.0.0",
|
||||
"website": "https://ultimaker.com",
|
||||
"author": {
|
||||
"author_id": "UltimakerPackages",
|
||||
|
|
@ -431,7 +431,7 @@
|
|||
"display_name": "Slice Info",
|
||||
"description": "Submits anonymous slice info. Can be disabled through preferences.",
|
||||
"package_version": "1.0.1",
|
||||
"sdk_version": "6.0.0",
|
||||
"sdk_version": "7.0.0",
|
||||
"website": "https://ultimaker.com",
|
||||
"author": {
|
||||
"author_id": "UltimakerPackages",
|
||||
|
|
@ -448,7 +448,7 @@
|
|||
"display_name": "Solid View",
|
||||
"description": "Provides a normal solid mesh view.",
|
||||
"package_version": "1.0.1",
|
||||
"sdk_version": "6.0.0",
|
||||
"sdk_version": "7.0.0",
|
||||
"website": "https://ultimaker.com",
|
||||
"author": {
|
||||
"author_id": "UltimakerPackages",
|
||||
|
|
@ -465,7 +465,7 @@
|
|||
"display_name": "Support Eraser Tool",
|
||||
"description": "Creates an eraser mesh to block the printing of support in certain places.",
|
||||
"package_version": "1.0.1",
|
||||
"sdk_version": "6.0.0",
|
||||
"sdk_version": "7.0.0",
|
||||
"website": "https://ultimaker.com",
|
||||
"author": {
|
||||
"author_id": "UltimakerPackages",
|
||||
|
|
@ -482,7 +482,7 @@
|
|||
"display_name": "Trimesh Reader",
|
||||
"description": "Provides support for reading model files.",
|
||||
"package_version": "1.0.0",
|
||||
"sdk_version": "6.0.0",
|
||||
"sdk_version": "7.0.0",
|
||||
"website": "https://ultimaker.com",
|
||||
"author": {
|
||||
"author_id": "UltimakerPackages",
|
||||
|
|
@ -499,7 +499,7 @@
|
|||
"display_name": "Toolbox",
|
||||
"description": "Find, manage and install new Cura packages.",
|
||||
"package_version": "1.0.1",
|
||||
"sdk_version": "6.0.0",
|
||||
"sdk_version": "7.0.0",
|
||||
"website": "https://ultimaker.com",
|
||||
"author": {
|
||||
"author_id": "UltimakerPackages",
|
||||
|
|
@ -516,7 +516,7 @@
|
|||
"display_name": "UFP Reader",
|
||||
"description": "Provides support for reading Ultimaker Format Packages.",
|
||||
"package_version": "1.0.0",
|
||||
"sdk_version": "6.0.0",
|
||||
"sdk_version": "7.0.0",
|
||||
"website": "https://ultimaker.com",
|
||||
"author": {
|
||||
"author_id": "UltimakerPackages",
|
||||
|
|
@ -533,7 +533,7 @@
|
|||
"display_name": "UFP Writer",
|
||||
"description": "Provides support for writing Ultimaker Format Packages.",
|
||||
"package_version": "1.0.1",
|
||||
"sdk_version": "6.0.0",
|
||||
"sdk_version": "7.0.0",
|
||||
"website": "https://ultimaker.com",
|
||||
"author": {
|
||||
"author_id": "UltimakerPackages",
|
||||
|
|
@ -550,7 +550,7 @@
|
|||
"display_name": "Ultimaker Machine Actions",
|
||||
"description": "Provides machine actions for Ultimaker machines (such as bed leveling wizard, selecting upgrades, etc.).",
|
||||
"package_version": "1.0.1",
|
||||
"sdk_version": "6.0.0",
|
||||
"sdk_version": "7.0.0",
|
||||
"website": "https://ultimaker.com",
|
||||
"author": {
|
||||
"author_id": "UltimakerPackages",
|
||||
|
|
@ -567,7 +567,7 @@
|
|||
"display_name": "UM3 Network Printing",
|
||||
"description": "Manages network connections to Ultimaker 3 printers.",
|
||||
"package_version": "1.0.1",
|
||||
"sdk_version": "6.0.0",
|
||||
"sdk_version": "7.0.0",
|
||||
"website": "https://ultimaker.com",
|
||||
"author": {
|
||||
"author_id": "UltimakerPackages",
|
||||
|
|
@ -584,7 +584,7 @@
|
|||
"display_name": "USB Printing",
|
||||
"description": "Accepts G-Code and sends them to a printer. Plugin can also update firmware.",
|
||||
"package_version": "1.0.2",
|
||||
"sdk_version": "6.0.0",
|
||||
"sdk_version": "7.0.0",
|
||||
"website": "https://ultimaker.com",
|
||||
"author": {
|
||||
"author_id": "UltimakerPackages",
|
||||
|
|
@ -601,7 +601,7 @@
|
|||
"display_name": "Version Upgrade 2.1 to 2.2",
|
||||
"description": "Upgrades configurations from Cura 2.1 to Cura 2.2.",
|
||||
"package_version": "1.0.1",
|
||||
"sdk_version": "6.0.0",
|
||||
"sdk_version": "7.0.0",
|
||||
"website": "https://ultimaker.com",
|
||||
"author": {
|
||||
"author_id": "UltimakerPackages",
|
||||
|
|
@ -618,7 +618,7 @@
|
|||
"display_name": "Version Upgrade 2.2 to 2.4",
|
||||
"description": "Upgrades configurations from Cura 2.2 to Cura 2.4.",
|
||||
"package_version": "1.0.1",
|
||||
"sdk_version": "6.0.0",
|
||||
"sdk_version": "7.0.0",
|
||||
"website": "https://ultimaker.com",
|
||||
"author": {
|
||||
"author_id": "UltimakerPackages",
|
||||
|
|
@ -635,7 +635,7 @@
|
|||
"display_name": "Version Upgrade 2.5 to 2.6",
|
||||
"description": "Upgrades configurations from Cura 2.5 to Cura 2.6.",
|
||||
"package_version": "1.0.1",
|
||||
"sdk_version": "6.0.0",
|
||||
"sdk_version": "7.0.0",
|
||||
"website": "https://ultimaker.com",
|
||||
"author": {
|
||||
"author_id": "UltimakerPackages",
|
||||
|
|
@ -652,7 +652,7 @@
|
|||
"display_name": "Version Upgrade 2.6 to 2.7",
|
||||
"description": "Upgrades configurations from Cura 2.6 to Cura 2.7.",
|
||||
"package_version": "1.0.1",
|
||||
"sdk_version": "6.0.0",
|
||||
"sdk_version": "7.0.0",
|
||||
"website": "https://ultimaker.com",
|
||||
"author": {
|
||||
"author_id": "UltimakerPackages",
|
||||
|
|
@ -669,7 +669,7 @@
|
|||
"display_name": "Version Upgrade 2.7 to 3.0",
|
||||
"description": "Upgrades configurations from Cura 2.7 to Cura 3.0.",
|
||||
"package_version": "1.0.1",
|
||||
"sdk_version": "6.0.0",
|
||||
"sdk_version": "7.0.0",
|
||||
"website": "https://ultimaker.com",
|
||||
"author": {
|
||||
"author_id": "UltimakerPackages",
|
||||
|
|
@ -686,7 +686,7 @@
|
|||
"display_name": "Version Upgrade 3.0 to 3.1",
|
||||
"description": "Upgrades configurations from Cura 3.0 to Cura 3.1.",
|
||||
"package_version": "1.0.1",
|
||||
"sdk_version": "6.0.0",
|
||||
"sdk_version": "7.0.0",
|
||||
"website": "https://ultimaker.com",
|
||||
"author": {
|
||||
"author_id": "UltimakerPackages",
|
||||
|
|
@ -703,7 +703,7 @@
|
|||
"display_name": "Version Upgrade 3.2 to 3.3",
|
||||
"description": "Upgrades configurations from Cura 3.2 to Cura 3.3.",
|
||||
"package_version": "1.0.1",
|
||||
"sdk_version": "6.0.0",
|
||||
"sdk_version": "7.0.0",
|
||||
"website": "https://ultimaker.com",
|
||||
"author": {
|
||||
"author_id": "UltimakerPackages",
|
||||
|
|
@ -720,7 +720,7 @@
|
|||
"display_name": "Version Upgrade 3.3 to 3.4",
|
||||
"description": "Upgrades configurations from Cura 3.3 to Cura 3.4.",
|
||||
"package_version": "1.0.1",
|
||||
"sdk_version": "6.0.0",
|
||||
"sdk_version": "7.0.0",
|
||||
"website": "https://ultimaker.com",
|
||||
"author": {
|
||||
"author_id": "UltimakerPackages",
|
||||
|
|
@ -737,7 +737,7 @@
|
|||
"display_name": "Version Upgrade 3.4 to 3.5",
|
||||
"description": "Upgrades configurations from Cura 3.4 to Cura 3.5.",
|
||||
"package_version": "1.0.1",
|
||||
"sdk_version": "6.0.0",
|
||||
"sdk_version": "7.0.0",
|
||||
"website": "https://ultimaker.com",
|
||||
"author": {
|
||||
"author_id": "UltimakerPackages",
|
||||
|
|
@ -754,7 +754,7 @@
|
|||
"display_name": "Version Upgrade 3.5 to 4.0",
|
||||
"description": "Upgrades configurations from Cura 3.5 to Cura 4.0.",
|
||||
"package_version": "1.0.0",
|
||||
"sdk_version": "6.0.0",
|
||||
"sdk_version": "7.0.0",
|
||||
"website": "https://ultimaker.com",
|
||||
"author": {
|
||||
"author_id": "UltimakerPackages",
|
||||
|
|
@ -771,7 +771,7 @@
|
|||
"display_name": "Version Upgrade 4.0 to 4.1",
|
||||
"description": "Upgrades configurations from Cura 4.0 to Cura 4.1.",
|
||||
"package_version": "1.0.1",
|
||||
"sdk_version": "6.0.0",
|
||||
"sdk_version": "7.0.0",
|
||||
"website": "https://ultimaker.com",
|
||||
"author": {
|
||||
"author_id": "UltimakerPackages",
|
||||
|
|
@ -788,7 +788,7 @@
|
|||
"display_name": "Version Upgrade 4.1 to 4.2",
|
||||
"description": "Upgrades configurations from Cura 4.1 to Cura 4.2.",
|
||||
"package_version": "1.0.0",
|
||||
"sdk_version": "6.0.0",
|
||||
"sdk_version": "7.0.0",
|
||||
"website": "https://ultimaker.com",
|
||||
"author": {
|
||||
"author_id": "UltimakerPackages",
|
||||
|
|
@ -805,7 +805,7 @@
|
|||
"display_name": "Version Upgrade 4.2 to 4.3",
|
||||
"description": "Upgrades configurations from Cura 4.2 to Cura 4.3.",
|
||||
"package_version": "1.0.0",
|
||||
"sdk_version": "6.0.0",
|
||||
"sdk_version": "7.0.0",
|
||||
"website": "https://ultimaker.com",
|
||||
"author": {
|
||||
"author_id": "UltimakerPackages",
|
||||
|
|
@ -822,7 +822,7 @@
|
|||
"display_name": "Version Upgrade 4.3 to 4.4",
|
||||
"description": "Upgrades configurations from Cura 4.3 to Cura 4.4.",
|
||||
"package_version": "1.0.0",
|
||||
"sdk_version": "6.0.0",
|
||||
"sdk_version": "7.0.0",
|
||||
"website": "https://ultimaker.com",
|
||||
"author": {
|
||||
"author_id": "UltimakerPackages",
|
||||
|
|
@ -839,7 +839,7 @@
|
|||
"display_name": "X3D Reader",
|
||||
"description": "Provides support for reading X3D files.",
|
||||
"package_version": "1.0.1",
|
||||
"sdk_version": "6.0.0",
|
||||
"sdk_version": "7.0.0",
|
||||
"website": "https://ultimaker.com",
|
||||
"author": {
|
||||
"author_id": "SevaAlekseyev",
|
||||
|
|
@ -856,7 +856,7 @@
|
|||
"display_name": "XML Material Profiles",
|
||||
"description": "Provides capabilities to read and write XML-based material profiles.",
|
||||
"package_version": "1.0.1",
|
||||
"sdk_version": "6.0.0",
|
||||
"sdk_version": "7.0.0",
|
||||
"website": "https://ultimaker.com",
|
||||
"author": {
|
||||
"author_id": "UltimakerPackages",
|
||||
|
|
@ -873,7 +873,7 @@
|
|||
"display_name": "X-Ray View",
|
||||
"description": "Provides the X-Ray view.",
|
||||
"package_version": "1.0.1",
|
||||
"sdk_version": "6.0.0",
|
||||
"sdk_version": "7.0.0",
|
||||
"website": "https://ultimaker.com",
|
||||
"author": {
|
||||
"author_id": "UltimakerPackages",
|
||||
|
|
@ -890,7 +890,7 @@
|
|||
"display_name": "Generic ABS",
|
||||
"description": "The generic ABS profile which other profiles can be based upon.",
|
||||
"package_version": "1.2.1",
|
||||
"sdk_version": "6.0.0",
|
||||
"sdk_version": "7.0.0",
|
||||
"website": "https://github.com/Ultimaker/fdm_materials",
|
||||
"author": {
|
||||
"author_id": "Generic",
|
||||
|
|
@ -908,7 +908,7 @@
|
|||
"display_name": "Generic BAM",
|
||||
"description": "The generic BAM profile which other profiles can be based upon.",
|
||||
"package_version": "1.2.1",
|
||||
"sdk_version": "6.0.0",
|
||||
"sdk_version": "7.0.0",
|
||||
"website": "https://github.com/Ultimaker/fdm_materials",
|
||||
"author": {
|
||||
"author_id": "Generic",
|
||||
|
|
@ -926,7 +926,7 @@
|
|||
"display_name": "Generic CFF CPE",
|
||||
"description": "The generic CFF CPE profile which other profiles can be based upon.",
|
||||
"package_version": "1.1.1",
|
||||
"sdk_version": "6.0.0",
|
||||
"sdk_version": "7.0.0",
|
||||
"website": "https://github.com/Ultimaker/fdm_materials",
|
||||
"author": {
|
||||
"author_id": "Generic",
|
||||
|
|
@ -944,7 +944,7 @@
|
|||
"display_name": "Generic CFF PA",
|
||||
"description": "The generic CFF PA profile which other profiles can be based upon.",
|
||||
"package_version": "1.1.1",
|
||||
"sdk_version": "6.0.0",
|
||||
"sdk_version": "7.0.0",
|
||||
"website": "https://github.com/Ultimaker/fdm_materials",
|
||||
"author": {
|
||||
"author_id": "Generic",
|
||||
|
|
@ -962,7 +962,7 @@
|
|||
"display_name": "Generic CPE",
|
||||
"description": "The generic CPE profile which other profiles can be based upon.",
|
||||
"package_version": "1.2.1",
|
||||
"sdk_version": "6.0.0",
|
||||
"sdk_version": "7.0.0",
|
||||
"website": "https://github.com/Ultimaker/fdm_materials",
|
||||
"author": {
|
||||
"author_id": "Generic",
|
||||
|
|
@ -980,7 +980,7 @@
|
|||
"display_name": "Generic CPE+",
|
||||
"description": "The generic CPE+ profile which other profiles can be based upon.",
|
||||
"package_version": "1.2.1",
|
||||
"sdk_version": "6.0.0",
|
||||
"sdk_version": "7.0.0",
|
||||
"website": "https://github.com/Ultimaker/fdm_materials",
|
||||
"author": {
|
||||
"author_id": "Generic",
|
||||
|
|
@ -998,7 +998,7 @@
|
|||
"display_name": "Generic GFF CPE",
|
||||
"description": "The generic GFF CPE profile which other profiles can be based upon.",
|
||||
"package_version": "1.1.1",
|
||||
"sdk_version": "6.0.0",
|
||||
"sdk_version": "7.0.0",
|
||||
"website": "https://github.com/Ultimaker/fdm_materials",
|
||||
"author": {
|
||||
"author_id": "Generic",
|
||||
|
|
@ -1016,7 +1016,7 @@
|
|||
"display_name": "Generic GFF PA",
|
||||
"description": "The generic GFF PA profile which other profiles can be based upon.",
|
||||
"package_version": "1.1.1",
|
||||
"sdk_version": "6.0.0",
|
||||
"sdk_version": "7.0.0",
|
||||
"website": "https://github.com/Ultimaker/fdm_materials",
|
||||
"author": {
|
||||
"author_id": "Generic",
|
||||
|
|
@ -1034,7 +1034,7 @@
|
|||
"display_name": "Generic HIPS",
|
||||
"description": "The generic HIPS profile which other profiles can be based upon.",
|
||||
"package_version": "1.0.1",
|
||||
"sdk_version": "6.0.0",
|
||||
"sdk_version": "7.0.0",
|
||||
"website": "https://github.com/Ultimaker/fdm_materials",
|
||||
"author": {
|
||||
"author_id": "Generic",
|
||||
|
|
@ -1052,7 +1052,7 @@
|
|||
"display_name": "Generic Nylon",
|
||||
"description": "The generic Nylon profile which other profiles can be based upon.",
|
||||
"package_version": "1.2.1",
|
||||
"sdk_version": "6.0.0",
|
||||
"sdk_version": "7.0.0",
|
||||
"website": "https://github.com/Ultimaker/fdm_materials",
|
||||
"author": {
|
||||
"author_id": "Generic",
|
||||
|
|
@ -1070,7 +1070,7 @@
|
|||
"display_name": "Generic PC",
|
||||
"description": "The generic PC profile which other profiles can be based upon.",
|
||||
"package_version": "1.2.1",
|
||||
"sdk_version": "6.0.0",
|
||||
"sdk_version": "7.0.0",
|
||||
"website": "https://github.com/Ultimaker/fdm_materials",
|
||||
"author": {
|
||||
"author_id": "Generic",
|
||||
|
|
@ -1088,7 +1088,7 @@
|
|||
"display_name": "Generic PETG",
|
||||
"description": "The generic PETG profile which other profiles can be based upon.",
|
||||
"package_version": "1.0.1",
|
||||
"sdk_version": "6.0.0",
|
||||
"sdk_version": "7.0.0",
|
||||
"website": "https://github.com/Ultimaker/fdm_materials",
|
||||
"author": {
|
||||
"author_id": "Generic",
|
||||
|
|
@ -1106,7 +1106,7 @@
|
|||
"display_name": "Generic PLA",
|
||||
"description": "The generic PLA profile which other profiles can be based upon.",
|
||||
"package_version": "1.2.1",
|
||||
"sdk_version": "6.0.0",
|
||||
"sdk_version": "7.0.0",
|
||||
"website": "https://github.com/Ultimaker/fdm_materials",
|
||||
"author": {
|
||||
"author_id": "Generic",
|
||||
|
|
@ -1124,7 +1124,7 @@
|
|||
"display_name": "Generic PP",
|
||||
"description": "The generic PP profile which other profiles can be based upon.",
|
||||
"package_version": "1.2.1",
|
||||
"sdk_version": "6.0.0",
|
||||
"sdk_version": "7.0.0",
|
||||
"website": "https://github.com/Ultimaker/fdm_materials",
|
||||
"author": {
|
||||
"author_id": "Generic",
|
||||
|
|
@ -1142,7 +1142,7 @@
|
|||
"display_name": "Generic PVA",
|
||||
"description": "The generic PVA profile which other profiles can be based upon.",
|
||||
"package_version": "1.2.1",
|
||||
"sdk_version": "6.0.0",
|
||||
"sdk_version": "7.0.0",
|
||||
"website": "https://github.com/Ultimaker/fdm_materials",
|
||||
"author": {
|
||||
"author_id": "Generic",
|
||||
|
|
@ -1160,7 +1160,7 @@
|
|||
"display_name": "Generic Tough PLA",
|
||||
"description": "The generic Tough PLA profile which other profiles can be based upon.",
|
||||
"package_version": "1.0.2",
|
||||
"sdk_version": "6.0.0",
|
||||
"sdk_version": "7.0.0",
|
||||
"website": "https://github.com/Ultimaker/fdm_materials",
|
||||
"author": {
|
||||
"author_id": "Generic",
|
||||
|
|
@ -1178,7 +1178,7 @@
|
|||
"display_name": "Generic TPU",
|
||||
"description": "The generic TPU profile which other profiles can be based upon.",
|
||||
"package_version": "1.2.1",
|
||||
"sdk_version": "6.0.0",
|
||||
"sdk_version": "7.0.0",
|
||||
"website": "https://github.com/Ultimaker/fdm_materials",
|
||||
"author": {
|
||||
"author_id": "Generic",
|
||||
|
|
@ -1196,7 +1196,7 @@
|
|||
"display_name": "Dagoma Chromatik PLA",
|
||||
"description": "Filament testé et approuvé pour les imprimantes 3D Dagoma. Chromatik est l'idéal pour débuter et suivre les tutoriels premiers pas. Il vous offre qualité et résistance pour chacune de vos impressions.",
|
||||
"package_version": "1.0.1",
|
||||
"sdk_version": "6.0.0",
|
||||
"sdk_version": "7.0.0",
|
||||
"website": "https://dagoma.fr/boutique/filaments.html",
|
||||
"author": {
|
||||
"author_id": "Dagoma",
|
||||
|
|
@ -1213,7 +1213,7 @@
|
|||
"display_name": "FABtotum ABS",
|
||||
"description": "This material is easy to be extruded but it is not the simplest to use. It is one of the most used in 3D printing to get very well finished objects. It is not sustainable and its smoke can be dangerous if inhaled. The reason to prefer this filament to PLA is mainly because of its precision and mechanical specs. ABS (for plastic) stands for Acrylonitrile Butadiene Styrene and it is a thermoplastic which is widely used in everyday objects. It can be printed with any FFF 3D printer which can get to high temperatures as it must be extruded in a range between 220° and 245°, so it’s compatible with all versions of the FABtotum Personal fabricator.",
|
||||
"package_version": "1.0.1",
|
||||
"sdk_version": "6.0.0",
|
||||
"sdk_version": "7.0.0",
|
||||
"website": "https://store.fabtotum.com/eu/products/filaments.html?filament_type=40",
|
||||
"author": {
|
||||
"author_id": "FABtotum",
|
||||
|
|
@ -1230,7 +1230,7 @@
|
|||
"display_name": "FABtotum Nylon",
|
||||
"description": "When 3D printing started this material was not listed among the extrudable filaments. It is flexible as well as resistant to tractions. It is well known for its uses in textile but also in industries which require a strong and flexible material. There are different kinds of Nylon: 3D printing mostly uses Nylon 6 and Nylon 6.6, which are the most common. It requires higher temperatures to be printed, so a 3D printer must be able to reach them (around 240°C): the FABtotum, of course, can.",
|
||||
"package_version": "1.0.1",
|
||||
"sdk_version": "6.0.0",
|
||||
"sdk_version": "7.0.0",
|
||||
"website": "https://store.fabtotum.com/eu/products/filaments.html?filament_type=53",
|
||||
"author": {
|
||||
"author_id": "FABtotum",
|
||||
|
|
@ -1247,7 +1247,7 @@
|
|||
"display_name": "FABtotum PLA",
|
||||
"description": "It is the most common filament used for 3D printing. It is studied to be bio-degradable as it comes from corn starch’s sugar mainly. It is completely made of renewable sources and has no footprint on polluting. PLA stands for PolyLactic Acid and it is a thermoplastic that today is still considered the easiest material to be 3D printed. It can be extruded at lower temperatures: the standard range of FABtotum’s one is between 185° and 195°.",
|
||||
"package_version": "1.0.1",
|
||||
"sdk_version": "6.0.0",
|
||||
"sdk_version": "7.0.0",
|
||||
"website": "https://store.fabtotum.com/eu/products/filaments.html?filament_type=39",
|
||||
"author": {
|
||||
"author_id": "FABtotum",
|
||||
|
|
@ -1264,7 +1264,7 @@
|
|||
"display_name": "FABtotum TPU Shore 98A",
|
||||
"description": "",
|
||||
"package_version": "1.0.1",
|
||||
"sdk_version": "6.0.0",
|
||||
"sdk_version": "7.0.0",
|
||||
"website": "https://store.fabtotum.com/eu/products/filaments.html?filament_type=66",
|
||||
"author": {
|
||||
"author_id": "FABtotum",
|
||||
|
|
@ -1281,7 +1281,7 @@
|
|||
"display_name": "Fiberlogy HD PLA",
|
||||
"description": "With our HD PLA you have many more options. You can use this material in two ways. Choose the one you like best. You can use it as a normal PLA and get prints characterized by a very good adhesion between the layers and high precision. You can also make your prints acquire similar properties to that of ABS – better impact resistance and high temperature resistance. All you need is an oven. Yes, an oven! By annealing our HD PLA in an oven, in accordance with the manual, you will avoid all the inconveniences of printing with ABS, such as unpleasant odour or hazardous fumes.",
|
||||
"package_version": "1.0.1",
|
||||
"sdk_version": "6.0.0",
|
||||
"sdk_version": "7.0.0",
|
||||
"website": "http://fiberlogy.com/en/fiberlogy-filaments/filament-hd-pla/",
|
||||
"author": {
|
||||
"author_id": "Fiberlogy",
|
||||
|
|
@ -1298,7 +1298,7 @@
|
|||
"display_name": "Filo3D PLA",
|
||||
"description": "Fast, safe and reliable printing. PLA is ideal for the fast and reliable printing of parts and prototypes with a great surface quality.",
|
||||
"package_version": "1.0.1",
|
||||
"sdk_version": "6.0.0",
|
||||
"sdk_version": "7.0.0",
|
||||
"website": "https://dagoma.fr",
|
||||
"author": {
|
||||
"author_id": "Dagoma",
|
||||
|
|
@ -1315,7 +1315,7 @@
|
|||
"display_name": "IMADE3D JellyBOX PETG",
|
||||
"description": "",
|
||||
"package_version": "1.0.1",
|
||||
"sdk_version": "6.0.0",
|
||||
"sdk_version": "7.0.0",
|
||||
"website": "http://shop.imade3d.com/filament.html",
|
||||
"author": {
|
||||
"author_id": "IMADE3D",
|
||||
|
|
@ -1332,7 +1332,7 @@
|
|||
"display_name": "IMADE3D JellyBOX PLA",
|
||||
"description": "",
|
||||
"package_version": "1.0.1",
|
||||
"sdk_version": "6.0.0",
|
||||
"sdk_version": "7.0.0",
|
||||
"website": "http://shop.imade3d.com/filament.html",
|
||||
"author": {
|
||||
"author_id": "IMADE3D",
|
||||
|
|
@ -1349,7 +1349,7 @@
|
|||
"display_name": "Octofiber PLA",
|
||||
"description": "PLA material from Octofiber.",
|
||||
"package_version": "1.0.1",
|
||||
"sdk_version": "6.0.0",
|
||||
"sdk_version": "7.0.0",
|
||||
"website": "https://nl.octofiber.com/3d-printing-filament/pla.html",
|
||||
"author": {
|
||||
"author_id": "Octofiber",
|
||||
|
|
@ -1366,7 +1366,7 @@
|
|||
"display_name": "PolyFlex™ PLA",
|
||||
"description": "PolyFlex™ is a highly flexible yet easy to print 3D printing material. Featuring good elasticity and a large strain-to- failure, PolyFlex™ opens up a completely new realm of applications.",
|
||||
"package_version": "1.0.1",
|
||||
"sdk_version": "6.0.0",
|
||||
"sdk_version": "7.0.0",
|
||||
"website": "http://www.polymaker.com/shop/polyflex/",
|
||||
"author": {
|
||||
"author_id": "Polymaker",
|
||||
|
|
@ -1383,7 +1383,7 @@
|
|||
"display_name": "PolyMax™ PLA",
|
||||
"description": "PolyMax™ PLA is a 3D printing material with excellent mechanical properties and printing quality. PolyMax™ PLA has an impact resistance of up to nine times that of regular PLA, and better overall mechanical properties than ABS.",
|
||||
"package_version": "1.0.1",
|
||||
"sdk_version": "6.0.0",
|
||||
"sdk_version": "7.0.0",
|
||||
"website": "http://www.polymaker.com/shop/polymax/",
|
||||
"author": {
|
||||
"author_id": "Polymaker",
|
||||
|
|
@ -1400,7 +1400,7 @@
|
|||
"display_name": "PolyPlus™ PLA True Colour",
|
||||
"description": "PolyPlus™ PLA is a premium PLA designed for all desktop FDM/FFF 3D printers. It is produced with our patented Jam-Free™ technology that ensures consistent extrusion and prevents jams.",
|
||||
"package_version": "1.0.1",
|
||||
"sdk_version": "6.0.0",
|
||||
"sdk_version": "7.0.0",
|
||||
"website": "http://www.polymaker.com/shop/polyplus-true-colour/",
|
||||
"author": {
|
||||
"author_id": "Polymaker",
|
||||
|
|
@ -1417,7 +1417,7 @@
|
|||
"display_name": "PolyWood™ PLA",
|
||||
"description": "PolyWood™ is a wood mimic printing material that contains no actual wood ensuring a clean Jam-Free™ printing experience.",
|
||||
"package_version": "1.0.1",
|
||||
"sdk_version": "6.0.0",
|
||||
"sdk_version": "7.0.0",
|
||||
"website": "http://www.polymaker.com/shop/polywood/",
|
||||
"author": {
|
||||
"author_id": "Polymaker",
|
||||
|
|
@ -1434,7 +1434,7 @@
|
|||
"display_name": "Ultimaker ABS",
|
||||
"description": "Example package for material and quality profiles for Ultimaker materials.",
|
||||
"package_version": "1.2.2",
|
||||
"sdk_version": "6.0.0",
|
||||
"sdk_version": "7.0.0",
|
||||
"website": "https://ultimaker.com/products/materials/abs",
|
||||
"author": {
|
||||
"author_id": "UltimakerPackages",
|
||||
|
|
@ -1453,7 +1453,7 @@
|
|||
"display_name": "Ultimaker Breakaway",
|
||||
"description": "Example package for material and quality profiles for Ultimaker materials.",
|
||||
"package_version": "1.2.1",
|
||||
"sdk_version": "6.0.0",
|
||||
"sdk_version": "7.0.0",
|
||||
"website": "https://ultimaker.com/products/materials/breakaway",
|
||||
"author": {
|
||||
"author_id": "UltimakerPackages",
|
||||
|
|
@ -1472,7 +1472,7 @@
|
|||
"display_name": "Ultimaker CPE",
|
||||
"description": "Example package for material and quality profiles for Ultimaker materials.",
|
||||
"package_version": "1.2.2",
|
||||
"sdk_version": "6.0.0",
|
||||
"sdk_version": "7.0.0",
|
||||
"website": "https://ultimaker.com/products/materials/abs",
|
||||
"author": {
|
||||
"author_id": "UltimakerPackages",
|
||||
|
|
@ -1491,7 +1491,7 @@
|
|||
"display_name": "Ultimaker CPE+",
|
||||
"description": "Example package for material and quality profiles for Ultimaker materials.",
|
||||
"package_version": "1.2.2",
|
||||
"sdk_version": "6.0.0",
|
||||
"sdk_version": "7.0.0",
|
||||
"website": "https://ultimaker.com/products/materials/cpe",
|
||||
"author": {
|
||||
"author_id": "UltimakerPackages",
|
||||
|
|
@ -1510,7 +1510,7 @@
|
|||
"display_name": "Ultimaker Nylon",
|
||||
"description": "Example package for material and quality profiles for Ultimaker materials.",
|
||||
"package_version": "1.2.2",
|
||||
"sdk_version": "6.0.0",
|
||||
"sdk_version": "7.0.0",
|
||||
"website": "https://ultimaker.com/products/materials/abs",
|
||||
"author": {
|
||||
"author_id": "UltimakerPackages",
|
||||
|
|
@ -1529,7 +1529,7 @@
|
|||
"display_name": "Ultimaker PC",
|
||||
"description": "Example package for material and quality profiles for Ultimaker materials.",
|
||||
"package_version": "1.2.2",
|
||||
"sdk_version": "6.0.0",
|
||||
"sdk_version": "7.0.0",
|
||||
"website": "https://ultimaker.com/products/materials/pc",
|
||||
"author": {
|
||||
"author_id": "UltimakerPackages",
|
||||
|
|
@ -1548,7 +1548,7 @@
|
|||
"display_name": "Ultimaker PLA",
|
||||
"description": "Example package for material and quality profiles for Ultimaker materials.",
|
||||
"package_version": "1.2.2",
|
||||
"sdk_version": "6.0.0",
|
||||
"sdk_version": "7.0.0",
|
||||
"website": "https://ultimaker.com/products/materials/abs",
|
||||
"author": {
|
||||
"author_id": "UltimakerPackages",
|
||||
|
|
@ -1567,7 +1567,7 @@
|
|||
"display_name": "Ultimaker PP",
|
||||
"description": "Example package for material and quality profiles for Ultimaker materials.",
|
||||
"package_version": "1.2.2",
|
||||
"sdk_version": "6.0.0",
|
||||
"sdk_version": "7.0.0",
|
||||
"website": "https://ultimaker.com/products/materials/pp",
|
||||
"author": {
|
||||
"author_id": "UltimakerPackages",
|
||||
|
|
@ -1586,7 +1586,7 @@
|
|||
"display_name": "Ultimaker PVA",
|
||||
"description": "Example package for material and quality profiles for Ultimaker materials.",
|
||||
"package_version": "1.2.1",
|
||||
"sdk_version": "6.0.0",
|
||||
"sdk_version": "7.0.0",
|
||||
"website": "https://ultimaker.com/products/materials/abs",
|
||||
"author": {
|
||||
"author_id": "UltimakerPackages",
|
||||
|
|
@ -1605,7 +1605,7 @@
|
|||
"display_name": "Ultimaker TPU 95A",
|
||||
"description": "Example package for material and quality profiles for Ultimaker materials.",
|
||||
"package_version": "1.2.2",
|
||||
"sdk_version": "6.0.0",
|
||||
"sdk_version": "7.0.0",
|
||||
"website": "https://ultimaker.com/products/materials/tpu-95a",
|
||||
"author": {
|
||||
"author_id": "UltimakerPackages",
|
||||
|
|
@ -1624,7 +1624,7 @@
|
|||
"display_name": "Ultimaker Tough PLA",
|
||||
"description": "Example package for material and quality profiles for Ultimaker materials.",
|
||||
"package_version": "1.0.3",
|
||||
"sdk_version": "6.0.0",
|
||||
"sdk_version": "7.0.0",
|
||||
"website": "https://ultimaker.com/products/materials/tough-pla",
|
||||
"author": {
|
||||
"author_id": "UltimakerPackages",
|
||||
|
|
@ -1643,7 +1643,7 @@
|
|||
"display_name": "Vertex Delta ABS",
|
||||
"description": "ABS material and quality files for the Delta Vertex K8800.",
|
||||
"package_version": "1.0.1",
|
||||
"sdk_version": "6.0.0",
|
||||
"sdk_version": "7.0.0",
|
||||
"website": "https://vertex3dprinter.eu",
|
||||
"author": {
|
||||
"author_id": "Velleman",
|
||||
|
|
@ -1660,7 +1660,7 @@
|
|||
"display_name": "Vertex Delta PET",
|
||||
"description": "ABS material and quality files for the Delta Vertex K8800.",
|
||||
"package_version": "1.0.1",
|
||||
"sdk_version": "6.0.0",
|
||||
"sdk_version": "7.0.0",
|
||||
"website": "https://vertex3dprinter.eu",
|
||||
"author": {
|
||||
"author_id": "Velleman",
|
||||
|
|
@ -1677,7 +1677,7 @@
|
|||
"display_name": "Vertex Delta PLA",
|
||||
"description": "ABS material and quality files for the Delta Vertex K8800.",
|
||||
"package_version": "1.0.1",
|
||||
"sdk_version": "6.0.0",
|
||||
"sdk_version": "7.0.0",
|
||||
"website": "https://vertex3dprinter.eu",
|
||||
"author": {
|
||||
"author_id": "Velleman",
|
||||
|
|
@ -1694,7 +1694,7 @@
|
|||
"display_name": "Vertex Delta TPU",
|
||||
"description": "ABS material and quality files for the Delta Vertex K8800.",
|
||||
"package_version": "1.0.1",
|
||||
"sdk_version": "6.0.0",
|
||||
"sdk_version": "7.0.0",
|
||||
"website": "https://vertex3dprinter.eu",
|
||||
"author": {
|
||||
"author_id": "Velleman",
|
||||
|
|
|
|||
|
|
@ -34,7 +34,6 @@
|
|||
},
|
||||
"speed_print": { "default_value": 14 },
|
||||
"speed_travel": { "value": "speed_print" },
|
||||
"speed_infill": { "default_value": 14 },
|
||||
"speed_wall": { "value": "speed_print * 0.7" },
|
||||
"speed_topbottom": { "value": "speed_print * 0.7" },
|
||||
"speed_layer_0": { "value": "speed_print * 0.7" },
|
||||
|
|
|
|||
|
|
@ -17,15 +17,10 @@
|
|||
|
||||
"overrides": {
|
||||
"machine_name": { "default_value": "3Dator" },
|
||||
"speed_travel": { "default_value": 120 },
|
||||
"prime_tower_size": { "default_value": 8.660254037844387 },
|
||||
"infill_sparse_density": { "default_value": 20 },
|
||||
"speed_wall_x": { "default_value": 45 },
|
||||
"speed_wall_0": { "default_value": 40 },
|
||||
"speed_topbottom": { "default_value": 35 },
|
||||
"layer_height": { "default_value": 0.2 },
|
||||
"speed_print": { "default_value": 50 },
|
||||
"speed_infill": { "default_value": 60 },
|
||||
"machine_heated_bed": { "default_value": true },
|
||||
"machine_center_is_zero": { "default_value": false },
|
||||
"machine_height": { "default_value": 260 },
|
||||
|
|
@ -33,8 +28,6 @@
|
|||
"machine_depth": { "default_value": 170 },
|
||||
"machine_width": { "default_value": 180 },
|
||||
"retraction_speed": {"default_value":100},
|
||||
"cool_fan_speed_min": {"default_value": 20},
|
||||
"cool_fan_speed_max": {"default_value": 70},
|
||||
"adhesion_type": { "default_value": "none" },
|
||||
"machine_head_with_fans_polygon": {
|
||||
"default_value": [
|
||||
|
|
|
|||
|
|
@ -79,9 +79,6 @@
|
|||
"line_width": {
|
||||
"value": "round(machine_nozzle_size * 0.875, 2)"
|
||||
},
|
||||
"speed_layer_0": {
|
||||
"default_value": 20
|
||||
},
|
||||
"speed_support": {
|
||||
"value": "speed_wall_0"
|
||||
},
|
||||
|
|
@ -107,22 +104,18 @@
|
|||
"default_value": 25
|
||||
},
|
||||
"switch_extruder_retraction_amount": {
|
||||
"default_value": 0,
|
||||
"value": "retraction_amount",
|
||||
"enabled": false
|
||||
},
|
||||
"switch_extruder_retraction_speeds": {
|
||||
"default_value": 25,
|
||||
"value": "retraction_speed",
|
||||
"enabled": false
|
||||
},
|
||||
"switch_extruder_retraction_speed": {
|
||||
"default_value": 25,
|
||||
"value": "retraction_retract_speed",
|
||||
"enabled": false
|
||||
},
|
||||
"switch_extruder_prime_speed": {
|
||||
"default_value": 25,
|
||||
"value": "retraction_prime_speed",
|
||||
"enabled": false
|
||||
},
|
||||
|
|
@ -142,11 +135,9 @@
|
|||
"default_value": "RepRap (Marlin/Sprinter)"
|
||||
},
|
||||
"machine_start_gcode" : {
|
||||
"default_value": "",
|
||||
"value": "\"\" if machine_gcode_flavor == \"UltiGCode\" else \"G21 ;metric values\\nG90 ;absolute positioning\\nM82 ;set extruder to absolute mode\\nM107 ;start with the fan off\\nM200 D0 T0 ;reset filament diameter\\nM200 D0 T1\\nG28 Z0; home all\\nG28 X0 Y0\\nG0 Z20 F2400 ;move the platform to 20mm\\nG92 E0\\nM190 S{material_bed_temperature_layer_0}\\nM109 T0 S{material_standby_temperature, 0}\\nM109 T1 S{material_print_temperature_layer_0, 1}\\nM104 T0 S{material_print_temperature_layer_0, 0}\\nT1 ; move to the 2th head\\nG0 Z20 F2400\\nG92 E-7.0 ;prime distance\\nG1 E0 F45 ;purge nozzle\\nG1 E-5.1 F1500 ; retract\\nG1 X90 Z0.01 F5000 ; move away from the prime poop\\nG1 X50 F9000\\nG0 Z20 F2400\\nT0 ; move to the first head\\nM104 T1 S{material_standby_temperature, 1}\\nG0 Z20 F2400\\nM104 T{initial_extruder_nr} S{material_print_temperature_layer_0, initial_extruder_nr}\\nG92 E-7.0\\nG1 E0 F45 ;purge nozzle\\nG1 X60 Z0.01 F5000 ; move away from the prime poop\\nG1 X20 F9000\\nM400 ;finish all moves\\nG92 E0\\n;end of startup sequence\\n\""
|
||||
},
|
||||
"machine_end_gcode" : {
|
||||
"default_value": "",
|
||||
"value": "\"\" if machine_gcode_flavor == \"UltiGCode\" else \"G90 ;absolute positioning\\nM104 S0 T0 ;extruder heater off\\nM104 S0 T1\\nM140 S0 ;turn off bed\\nT0 ; move to the first head\\nM107 ;fan off\""
|
||||
},
|
||||
"machine_extruder_count": {
|
||||
|
|
@ -158,12 +149,10 @@
|
|||
},
|
||||
"acceleration_print":
|
||||
{
|
||||
"default_value": 2000,
|
||||
"value": "2000"
|
||||
},
|
||||
"acceleration_travel":
|
||||
{
|
||||
"default_value": 3000,
|
||||
"value": "acceleration_print if magic_spiralize else 3000"
|
||||
},
|
||||
"acceleration_layer_0": { "value": "acceleration_topbottom" },
|
||||
|
|
@ -183,7 +172,6 @@
|
|||
},
|
||||
"jerk_travel":
|
||||
{
|
||||
"default_value": 20,
|
||||
"value": "jerk_print if magic_spiralize else 20"
|
||||
},
|
||||
"jerk_layer_0": { "value": "jerk_topbottom" },
|
||||
|
|
|
|||
|
|
@ -49,33 +49,9 @@
|
|||
"top_bottom_thickness": {
|
||||
"default_value": 1
|
||||
},
|
||||
"bottom_thickness": {
|
||||
"default_value": 1
|
||||
},
|
||||
"material_print_temperature": {
|
||||
"default_value": 200
|
||||
},
|
||||
"material_bed_temperature": {
|
||||
"default_value": 0
|
||||
},
|
||||
"speed_print": {
|
||||
"default_value": 40
|
||||
},
|
||||
"speed_infill": {
|
||||
"default_value": 70
|
||||
},
|
||||
"speed_wall": {
|
||||
"default_value": 25
|
||||
},
|
||||
"speed_topbottom": {
|
||||
"default_value": 15
|
||||
},
|
||||
"speed_travel": {
|
||||
"default_value": 150
|
||||
},
|
||||
"speed_layer_0": {
|
||||
"default_value": 30
|
||||
},
|
||||
"support_enable": {
|
||||
"default_value": true
|
||||
}
|
||||
|
|
|
|||
|
|
@ -49,33 +49,9 @@
|
|||
"top_bottom_thickness": {
|
||||
"default_value": 1
|
||||
},
|
||||
"bottom_thickness": {
|
||||
"default_value": 1
|
||||
},
|
||||
"material_print_temperature": {
|
||||
"default_value": 200
|
||||
},
|
||||
"material_bed_temperature": {
|
||||
"default_value": 0
|
||||
},
|
||||
"speed_print": {
|
||||
"default_value": 40
|
||||
},
|
||||
"speed_infill": {
|
||||
"default_value": 70
|
||||
},
|
||||
"speed_wall": {
|
||||
"default_value": 25
|
||||
},
|
||||
"speed_topbottom": {
|
||||
"default_value": 15
|
||||
},
|
||||
"speed_travel": {
|
||||
"default_value": 150
|
||||
},
|
||||
"speed_layer_0": {
|
||||
"default_value": 30
|
||||
},
|
||||
"support_enable": {
|
||||
"default_value": true
|
||||
}
|
||||
|
|
|
|||
|
|
@ -49,33 +49,9 @@
|
|||
"top_bottom_thickness": {
|
||||
"default_value": 1
|
||||
},
|
||||
"bottom_thickness": {
|
||||
"default_value": 1
|
||||
},
|
||||
"material_print_temperature": {
|
||||
"default_value": 200
|
||||
},
|
||||
"material_bed_temperature": {
|
||||
"default_value": 0
|
||||
},
|
||||
"speed_print": {
|
||||
"default_value": 40
|
||||
},
|
||||
"speed_infill": {
|
||||
"default_value": 70
|
||||
},
|
||||
"speed_wall": {
|
||||
"default_value": 25
|
||||
},
|
||||
"speed_topbottom": {
|
||||
"default_value": 15
|
||||
},
|
||||
"speed_travel": {
|
||||
"default_value": 150
|
||||
},
|
||||
"speed_layer_0": {
|
||||
"default_value": 30
|
||||
},
|
||||
"support_enable": {
|
||||
"default_value": true
|
||||
}
|
||||
|
|
|
|||
|
|
@ -47,12 +47,6 @@
|
|||
"material_diameter": {
|
||||
"default_value": 1.75
|
||||
},
|
||||
"material_print_temperature": {
|
||||
"default_value": 210
|
||||
},
|
||||
"material_bed_temperature": {
|
||||
"default_value": 50
|
||||
},
|
||||
"layer_height_0": {
|
||||
"default_value": 0.2
|
||||
},
|
||||
|
|
@ -62,21 +56,6 @@
|
|||
"speed_print": {
|
||||
"default_value": 40
|
||||
},
|
||||
"speed_infill": {
|
||||
"default_value": 40
|
||||
},
|
||||
"speed_wall": {
|
||||
"default_value": 35
|
||||
},
|
||||
"speed_topbottom": {
|
||||
"default_value": 35
|
||||
},
|
||||
"speed_travel": {
|
||||
"default_value": 120
|
||||
},
|
||||
"speed_layer_0": {
|
||||
"default_value": 20
|
||||
},
|
||||
"support_enable": {
|
||||
"default_value": true
|
||||
},
|
||||
|
|
|
|||
|
|
@ -22,16 +22,9 @@
|
|||
"default_value": "; -- END GCODE --\nM104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F80 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning\nM107 ;turn the fan off; -- end of END GCODE --"
|
||||
},
|
||||
"material_diameter": { "default_value": 1.75 },
|
||||
"material_print_temperature": { "default_value": 210 },
|
||||
"material_bed_temperature": { "default_value": 50 },
|
||||
"layer_height_0": { "default_value": 0.2 },
|
||||
"wall_thickness": { "default_value": 1.2 },
|
||||
"speed_print": { "default_value": 40 },
|
||||
"speed_infill": { "default_value": 50 },
|
||||
"speed_wall": { "default_value": 35 },
|
||||
"speed_topbottom": { "default_value": 35 },
|
||||
"speed_travel": { "default_value": 120 },
|
||||
"speed_layer_0": { "default_value": 20 },
|
||||
"support_enable": { "default_value": true },
|
||||
"retraction_enable": { "default_value": true },
|
||||
"retraction_amount": { "default_value": 5 },
|
||||
|
|
|
|||
|
|
@ -15,26 +15,19 @@
|
|||
},
|
||||
|
||||
"overrides": {
|
||||
"speed_topbottom": { "default_value": 40 },
|
||||
"speed_print": { "default_value": 40 },
|
||||
"machine_extruder_count": { "default_value": 1 },
|
||||
"prime_tower_size": { "default_value": 7.745966692414834 },
|
||||
"machine_name": { "default_value": "BFB_Test" },
|
||||
"machine_heated_bed": { "default_value": false },
|
||||
"speed_layer_0": { "default_value": 25 },
|
||||
"machine_width": { "default_value": 275 },
|
||||
"machine_gcode_flavor": { "default_value": "BFB" },
|
||||
"machine_depth": { "default_value": 265 },
|
||||
"speed_infill": { "default_value": 30 },
|
||||
"machine_center_is_zero": { "default_value": true },
|
||||
"machine_height": { "default_value": 240 },
|
||||
"layer_height": { "default_value": 0.25 },
|
||||
"material_print_temperature": { "default_value": 200 },
|
||||
"retraction_amount": { "default_value": 0.05 },
|
||||
"speed_wall_0": { "default_value": 25 },
|
||||
"speed_travel": { "default_value": 50 },
|
||||
"infill_sparse_density": { "default_value": 10 },
|
||||
"layer_height_0": { "default_value": 0.5 },
|
||||
"speed_wall_x": { "default_value": 20 }
|
||||
"layer_height_0": { "default_value": 0.5 }
|
||||
}
|
||||
}
|
||||
|
|
|
|||
|
|
@ -1,5 +1,4 @@
|
|||
{
|
||||
"id": "BIBO2 dual",
|
||||
"version": 2,
|
||||
"name": "BIBO2 dual",
|
||||
"inherits": "fdmprinter",
|
||||
|
|
|
|||
|
|
@ -54,33 +54,9 @@
|
|||
"top_bottom_thickness": {
|
||||
"default_value": 1
|
||||
},
|
||||
"bottom_thickness": {
|
||||
"default_value": 1
|
||||
},
|
||||
"material_print_temperature": {
|
||||
"default_value": 220
|
||||
},
|
||||
"material_bed_temperature": {
|
||||
"default_value": 0
|
||||
},
|
||||
"speed_print": {
|
||||
"default_value": 40
|
||||
},
|
||||
"speed_infill": {
|
||||
"default_value": 40
|
||||
},
|
||||
"speed_wall": {
|
||||
"default_value": 35
|
||||
},
|
||||
"speed_topbottom": {
|
||||
"default_value": 35
|
||||
},
|
||||
"speed_travel": {
|
||||
"default_value": 120
|
||||
},
|
||||
"speed_layer_0": {
|
||||
"default_value": 20
|
||||
},
|
||||
"support_enable": {
|
||||
"default_value": true
|
||||
}
|
||||
|
|
|
|||
|
|
@ -24,26 +24,14 @@
|
|||
"machine_height": { "default_value": 220 },
|
||||
"machine_heated_bed": { "default_value": false },
|
||||
"machine_center_is_zero": { "default_value": false },
|
||||
"material_print_temperature": { "default_value": 210 },
|
||||
"material_bed_temperature": { "default_value": 0 },
|
||||
"layer_height": { "default_value": 0.2 },
|
||||
"layer_height_0": { "default_value": 0.2 },
|
||||
"wall_line_count": { "default_value": 3 },
|
||||
"wall_thickness": { "default_value": 1.2 },
|
||||
"top_bottom_thickness": { "default_value": 1.2 },
|
||||
"infill_sparse_density": { "default_value": 20 },
|
||||
"infill_overlap": { "default_value": 15 },
|
||||
"speed_print": { "default_value": 60 },
|
||||
"speed_travel": { "default_value": 160 },
|
||||
"speed_layer_0": { "default_value": 30 },
|
||||
"speed_wall_x": { "default_value": 35 },
|
||||
"speed_wall_0": { "default_value": 30 },
|
||||
"speed_infill": { "default_value": 80 },
|
||||
"speed_topbottom": { "default_value": 35 },
|
||||
"skirt_brim_speed": { "default_value": 35 },
|
||||
"skirt_line_count": { "default_value": 4 },
|
||||
"skirt_brim_minimal_length": { "default_value": 30 },
|
||||
"skirt_gap": { "default_value": 6 },
|
||||
"cool_fan_full_at_height": { "default_value": 0.4 }
|
||||
"skirt_gap": { "default_value": 6 }
|
||||
}
|
||||
}
|
||||
|
|
|
|||
|
|
@ -53,33 +53,9 @@
|
|||
"top_bottom_thickness": {
|
||||
"default_value": 1
|
||||
},
|
||||
"bottom_thickness": {
|
||||
"default_value": 1
|
||||
},
|
||||
"material_print_temperature": {
|
||||
"default_value": 220
|
||||
},
|
||||
"material_bed_temperature": {
|
||||
"default_value": 0
|
||||
},
|
||||
"speed_print": {
|
||||
"default_value": 40
|
||||
},
|
||||
"speed_infill": {
|
||||
"default_value": 40
|
||||
},
|
||||
"speed_wall": {
|
||||
"default_value": 35
|
||||
},
|
||||
"speed_topbottom": {
|
||||
"default_value": 35
|
||||
},
|
||||
"speed_travel": {
|
||||
"default_value": 120
|
||||
},
|
||||
"speed_layer_0": {
|
||||
"default_value": 20
|
||||
},
|
||||
"support_enable": {
|
||||
"default_value": true
|
||||
}
|
||||
|
|
|
|||
|
|
@ -54,33 +54,9 @@
|
|||
"top_bottom_thickness": {
|
||||
"default_value": 1
|
||||
},
|
||||
"bottom_thickness": {
|
||||
"default_value": 1
|
||||
},
|
||||
"material_print_temperature": {
|
||||
"default_value": 220
|
||||
},
|
||||
"material_bed_temperature": {
|
||||
"default_value": 0
|
||||
},
|
||||
"speed_print": {
|
||||
"default_value": 40
|
||||
},
|
||||
"speed_infill": {
|
||||
"default_value": 40
|
||||
},
|
||||
"speed_wall": {
|
||||
"default_value": 35
|
||||
},
|
||||
"speed_topbottom": {
|
||||
"default_value": 35
|
||||
},
|
||||
"speed_travel": {
|
||||
"default_value": 120
|
||||
},
|
||||
"speed_layer_0": {
|
||||
"default_value": 20
|
||||
},
|
||||
"support_enable": {
|
||||
"default_value": true
|
||||
}
|
||||
|
|
|
|||
|
|
@ -41,21 +41,12 @@
|
|||
"machine_gcode_flavor": {
|
||||
"default_value": "RepRap (Marlin/Sprinter)"
|
||||
},
|
||||
"material_print_temperature": {
|
||||
"default_value": 210
|
||||
},
|
||||
"material_bed_temperature": {
|
||||
"default_value": 0
|
||||
},
|
||||
"layer_height": {
|
||||
"default_value": 0.2
|
||||
},
|
||||
"layer_height_0": {
|
||||
"default_value": 0.2
|
||||
},
|
||||
"wall_line_count": {
|
||||
"default_value": 3
|
||||
},
|
||||
"wall_thickness": {
|
||||
"default_value": 1.2
|
||||
},
|
||||
|
|
@ -65,33 +56,9 @@
|
|||
"infill_sparse_density": {
|
||||
"default_value": 20
|
||||
},
|
||||
"infill_overlap": {
|
||||
"default_value": 15
|
||||
},
|
||||
"speed_print": {
|
||||
"default_value": 60
|
||||
},
|
||||
"speed_travel": {
|
||||
"default_value": 160
|
||||
},
|
||||
"speed_layer_0": {
|
||||
"default_value": 30
|
||||
},
|
||||
"speed_wall_x": {
|
||||
"default_value": 35
|
||||
},
|
||||
"speed_wall_0": {
|
||||
"default_value": 30
|
||||
},
|
||||
"speed_infill": {
|
||||
"default_value": 80
|
||||
},
|
||||
"speed_topbottom": {
|
||||
"default_value": 35
|
||||
},
|
||||
"skirt_brim_speed": {
|
||||
"default_value": 35
|
||||
},
|
||||
"skirt_line_count": {
|
||||
"default_value": 4
|
||||
},
|
||||
|
|
@ -101,9 +68,6 @@
|
|||
"skirt_gap": {
|
||||
"default_value": 6
|
||||
},
|
||||
"cool_fan_full_at_height": {
|
||||
"default_value": 0.4
|
||||
},
|
||||
"support_enable": {
|
||||
"default_value": false
|
||||
}
|
||||
|
|
|
|||
|
|
@ -35,8 +35,6 @@
|
|||
"material_standby_temperature": { "value": "material_print_temperature" },
|
||||
|
||||
"switch_extruder_retraction_speeds": {"default_value": 15 },
|
||||
"switch_extruder_retraction_speed": {"default_value": 15 },
|
||||
"switch_extruder_prime_speed": {"default_value": 15 },
|
||||
"switch_extruder_retraction_amount": {"value": 1 },
|
||||
|
||||
"speed_travel": { "value": "100" },
|
||||
|
|
@ -85,14 +83,12 @@
|
|||
|
||||
"retraction_amount": { "default_value": 3 },
|
||||
"retraction_speed": { "default_value": 15 },
|
||||
"retraction_retract_speed": { "default_value": 15 },
|
||||
"retraction_prime_speed": { "default_value": 15 },
|
||||
"travel_retract_before_outer_wall": { "default_value": true },
|
||||
"skin_overlap": { "value": "15" },
|
||||
"adhesion_type": { "default_value": "skirt" },
|
||||
"machine_nozzle_heat_up_speed": { "default_value": 2 },
|
||||
"machine_nozzle_cool_down_speed": { "default_value": 2 },
|
||||
"machine_head_polygon": { "default_value": [[-75, -18],[-75, 35],[18, 35],[18, -18]] },
|
||||
"machine_head_with_fans_polygon": { "default_value": [[-75, -18],[-75, 35],[18, 35],[18, -18]] },
|
||||
"gantry_height": { "value": "55" },
|
||||
"machine_max_feedrate_x": { "default_value": 300 },
|
||||
"machine_max_feedrate_y": { "default_value": 300 },
|
||||
|
|
|
|||
|
|
@ -35,8 +35,6 @@
|
|||
"material_standby_temperature": { "value": "material_print_temperature" },
|
||||
|
||||
"switch_extruder_retraction_speeds": {"default_value": 15 },
|
||||
"switch_extruder_retraction_speed": {"default_value": 15 },
|
||||
"switch_extruder_prime_speed": {"default_value": 15 },
|
||||
"switch_extruder_retraction_amount": {"value": 1 },
|
||||
|
||||
"speed_travel": { "value": "100" },
|
||||
|
|
@ -85,14 +83,12 @@
|
|||
|
||||
"retraction_amount": { "default_value": 3 },
|
||||
"retraction_speed": { "default_value": 15 },
|
||||
"retraction_retract_speed": { "default_value": 15 },
|
||||
"retraction_prime_speed": { "default_value": 15 },
|
||||
"travel_retract_before_outer_wall": { "default_value": true },
|
||||
"skin_overlap": { "value": "15" },
|
||||
"adhesion_type": { "default_value": "skirt" },
|
||||
"machine_nozzle_heat_up_speed": { "default_value": 2 },
|
||||
"machine_nozzle_cool_down_speed": { "default_value": 2 },
|
||||
"machine_head_polygon": { "default_value": [[-75, -18],[-75, 35],[18, 35],[18, -18]] },
|
||||
"machine_head_with_fans_polygon": { "default_value": [[-75, -18],[-75, 35],[18, 35],[18, -18]] },
|
||||
"gantry_height": { "value": "55" },
|
||||
"machine_max_feedrate_x": { "default_value": 300 },
|
||||
"machine_max_feedrate_y": { "default_value": 300 },
|
||||
|
|
|
|||
|
|
@ -34,8 +34,6 @@
|
|||
"material_standby_temperature": { "value": "material_print_temperature" },
|
||||
|
||||
"switch_extruder_retraction_speeds": {"default_value": 15 },
|
||||
"switch_extruder_retraction_speed": {"default_value": 15 },
|
||||
"switch_extruder_prime_speed": {"default_value": 15 },
|
||||
"switch_extruder_retraction_amount": {"value": 1 },
|
||||
|
||||
"speed_travel": { "value": "100" },
|
||||
|
|
@ -84,14 +82,12 @@
|
|||
|
||||
"retraction_amount": { "default_value": 3 },
|
||||
"retraction_speed": { "default_value": 15 },
|
||||
"retraction_retract_speed": { "default_value": 15 },
|
||||
"retraction_prime_speed": { "default_value": 15 },
|
||||
"travel_retract_before_outer_wall": { "default_value": true },
|
||||
"skin_overlap": { "value": "15" },
|
||||
"adhesion_type": { "default_value": "skirt" },
|
||||
"machine_nozzle_heat_up_speed": { "default_value": 2 },
|
||||
"machine_nozzle_cool_down_speed": { "default_value": 2 },
|
||||
"machine_head_polygon": { "default_value": [[-75, -18],[-75, 35],[18, 35],[18, -18]] },
|
||||
"machine_head_with_fans_polygon": { "default_value": [[-75, -18],[-75, 35],[18, 35],[18, -18]] },
|
||||
"gantry_height": { "value": "55" },
|
||||
"machine_max_feedrate_x": { "default_value": 300 },
|
||||
"machine_max_feedrate_y": { "default_value": 300 },
|
||||
|
|
|
|||
|
|
@ -47,9 +47,6 @@
|
|||
"material_diameter": {
|
||||
"default_value": 1.75
|
||||
},
|
||||
"material_print_temperature": {
|
||||
"default_value": 220
|
||||
},
|
||||
"layer_height": {
|
||||
"default_value": 0.10
|
||||
},
|
||||
|
|
@ -65,21 +62,6 @@
|
|||
"speed_print": {
|
||||
"default_value": 40
|
||||
},
|
||||
"speed_infill": {
|
||||
"default_value": 40
|
||||
},
|
||||
"speed_wall": {
|
||||
"default_value": 35
|
||||
},
|
||||
"speed_topbottom": {
|
||||
"default_value": 35
|
||||
},
|
||||
"speed_travel": {
|
||||
"default_value": 70
|
||||
},
|
||||
"speed_layer_0": {
|
||||
"default_value": 20
|
||||
},
|
||||
"support_enable": {
|
||||
"default_value": true
|
||||
},
|
||||
|
|
|
|||
|
|
@ -1,5 +1,4 @@
|
|||
{
|
||||
"id": "CR-X",
|
||||
"version": 2,
|
||||
"name": "Creality CR-X",
|
||||
"inherits": "fdmprinter",
|
||||
|
|
@ -32,7 +31,6 @@
|
|||
"adhesion_type": { "default_value": "skirt" },
|
||||
"gantry_height": { "value": "30" },
|
||||
"speed_print": { "default_value": 60 },
|
||||
"speed_travel": { "default_value": 120 },
|
||||
"machine_max_acceleration_x": { "default_value": 500 },
|
||||
"machine_max_acceleration_y": { "default_value": 500 },
|
||||
"machine_max_acceleration_z": { "default_value": 100 },
|
||||
|
|
@ -43,9 +41,7 @@
|
|||
"machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
|
||||
"machine_start_gcode": { "default_value": "G21 ;metric values\nG28 ;home all\nG90 ;absolute positioning\nM107 ;start with the fan off\nG1 F2400 Z15.0 ;raise the nozzle 15mm\nM109 S{material_print_temperature} ;Set Extruder Temperature and Wait\nM190 S{material_bed_temperature}; Wait for bed temperature to reach target temp\nT0 ;Switch to Extruder 1\nG1 F3000 X5 Y10 Z0.2 ;move to prime start position\nG92 E0 ;reset extrusion distance\nG1 F600 X160 E15 ;prime nozzle in a line\nG1 F5000 X180 ;quick wipe\nG92 E0 ;reset extrusion distance" },
|
||||
"machine_end_gcode": { "default_value": "M104 S0 ;hotend off\nM140 S0 ;bed off\nG92 E0\nG1 F2000 E-100 ;retract filament 100mm\nG92 E0\nG1 F3000 X0 Y270 ;move bed for easy part removal\nM84 ;disable steppers" },
|
||||
"material_print_temperature": { "default_value": 200 },
|
||||
"wall_thickness": { "default_value": 1 },
|
||||
"top_bottom_thickness": { "default_value": 1 },
|
||||
"bottom_thickness": { "default_value": 1 }
|
||||
"top_bottom_thickness": { "default_value": 1 }
|
||||
}
|
||||
}
|
||||
|
|
|
|||
|
|
@ -7,13 +7,6 @@
|
|||
"machine_width": { "default_value": 300 },
|
||||
"machine_depth": { "default_value": 300 },
|
||||
"machine_height": { "default_value": 400 },
|
||||
"machine_head_polygon": { "default_value": [
|
||||
[-26, 34],
|
||||
[-26, -32],
|
||||
[22, -32],
|
||||
[22, 34]
|
||||
]
|
||||
},
|
||||
"machine_head_with_fans_polygon": { "default_value": [
|
||||
[-26, 34],
|
||||
[-26, -32],
|
||||
|
|
|
|||
|
|
@ -8,13 +8,6 @@
|
|||
"machine_width": { "default_value": 450 },
|
||||
"machine_depth": { "default_value": 450 },
|
||||
"machine_height": { "default_value": 470 },
|
||||
"machine_head_polygon": { "default_value": [
|
||||
[-44, 34],
|
||||
[-44, -34],
|
||||
[18, -34],
|
||||
[18, 34]
|
||||
]
|
||||
},
|
||||
"machine_head_with_fans_polygon": { "default_value": [
|
||||
[-44, 34],
|
||||
[-44, -34],
|
||||
|
|
|
|||
|
|
@ -7,13 +7,6 @@
|
|||
"machine_width": { "default_value": 300 },
|
||||
"machine_depth": { "default_value": 220 },
|
||||
"machine_height": { "default_value": 300 },
|
||||
"machine_head_polygon": { "default_value": [
|
||||
[-26, 34],
|
||||
[-26, -32],
|
||||
[22, -32],
|
||||
[22, 34]
|
||||
]
|
||||
},
|
||||
"machine_head_with_fans_polygon": { "default_value": [
|
||||
[-26, 34],
|
||||
[-26, -32],
|
||||
|
|
|
|||
|
|
@ -7,13 +7,6 @@
|
|||
"machine_width": { "default_value": 400 },
|
||||
"machine_depth": { "default_value": 400 },
|
||||
"machine_height": { "default_value": 400 },
|
||||
"machine_head_polygon": { "default_value": [
|
||||
[-26, 34],
|
||||
[-26, -32],
|
||||
[22, -32],
|
||||
[22, 34]
|
||||
]
|
||||
},
|
||||
"machine_head_with_fans_polygon": { "default_value": [
|
||||
[-26, 34],
|
||||
[-26, -32],
|
||||
|
|
|
|||
|
|
@ -7,13 +7,6 @@
|
|||
"machine_width": { "default_value": 500 },
|
||||
"machine_depth": { "default_value": 500 },
|
||||
"machine_height": { "default_value": 500 },
|
||||
"machine_head_polygon": { "default_value": [
|
||||
[-26, 34],
|
||||
[-26, -32],
|
||||
[22, -32],
|
||||
[22, 34]
|
||||
]
|
||||
},
|
||||
"machine_head_with_fans_polygon": { "default_value": [
|
||||
[-26, 34],
|
||||
[-26, -32],
|
||||
|
|
|
|||
|
|
@ -5,13 +5,6 @@
|
|||
"overrides": {
|
||||
"machine_name": { "default_value": "Creality CR-10S Pro" },
|
||||
"machine_start_gcode": { "default_value": "M201 X500.00 Y500.00 Z100.00 E5000.00 ;Setup machine max acceleration\nM203 X500.00 Y500.00 Z10.00 E50.00 ;Setup machine max feedrate\nM204 P500.00 R1000.00 T500.00 ;Setup Print/Retract/Travel acceleration\nM205 X8.00 Y8.00 Z0.40 E5.00 ;Setup Jerk\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\n\nG28 ;Home\nM420 S1 Z2 ;Enable ABL using saved Mesh and Fade Height\n\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\n"},
|
||||
"machine_head_polygon": { "default_value": [
|
||||
[-44, 34],
|
||||
[-44, -34],
|
||||
[18, -34],
|
||||
[18, 34]
|
||||
]
|
||||
},
|
||||
"machine_head_with_fans_polygon": { "default_value": [
|
||||
[-44, 34],
|
||||
[-44, -34],
|
||||
|
|
|
|||
|
|
@ -7,13 +7,6 @@
|
|||
"machine_width": { "default_value": 220 },
|
||||
"machine_depth": { "default_value": 220 },
|
||||
"machine_height": { "default_value": 250 },
|
||||
"machine_head_polygon": { "default_value": [
|
||||
[-26, 34],
|
||||
[-26, -32],
|
||||
[22, -32],
|
||||
[22, 34]
|
||||
]
|
||||
},
|
||||
"machine_head_with_fans_polygon": { "default_value": [
|
||||
[-26, 34],
|
||||
[-26, -32],
|
||||
|
|
|
|||
|
|
@ -8,13 +8,6 @@
|
|||
"machine_width": { "default_value": 150 },
|
||||
"machine_depth": { "default_value": 150 },
|
||||
"machine_height": { "default_value": 200 },
|
||||
"machine_head_polygon": { "default_value": [
|
||||
[-26, 34],
|
||||
[-26, -32],
|
||||
[22, -32],
|
||||
[22, 34]
|
||||
]
|
||||
},
|
||||
"machine_head_with_fans_polygon": { "default_value": [
|
||||
[-26, 34],
|
||||
[-26, -32],
|
||||
|
|
|
|||
|
|
@ -9,16 +9,14 @@
|
|||
},
|
||||
"overrides": {
|
||||
"machine_name": { "default_value": "Creality Ender-3" },
|
||||
"machine_width": { "default_value": 220 },
|
||||
"machine_depth": { "default_value": 220 },
|
||||
"machine_width": { "default_value": 235 },
|
||||
"machine_depth": { "default_value": 235 },
|
||||
"machine_height": { "default_value": 250 },
|
||||
"machine_head_polygon": { "default_value": [
|
||||
[-1, 1],
|
||||
[-1, -1],
|
||||
[1, -1],
|
||||
[1, 1]
|
||||
]
|
||||
},
|
||||
"machine_disallowed_areas": {
|
||||
"default_value": [
|
||||
[[-117.5, 117.5], [-117.5, 108], [117.5, 108], [117.5, 117.5]],
|
||||
[[-117.5, -108], [-117.5, -117.5], [117.5, -117.5], [117.5, -108]]
|
||||
]},
|
||||
"machine_head_with_fans_polygon": { "default_value": [
|
||||
[-26, 34],
|
||||
[-26, -32],
|
||||
|
|
@ -26,7 +24,10 @@
|
|||
[32, 34]
|
||||
]
|
||||
},
|
||||
"machine_start_gcode": {
|
||||
"default_value": "; Ender 3 Custom Start G-code\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z0.3 F5000.0 ; Move to start position\nG1 X0.1 Y200.0 Z0.3 F1500.0 E15 ; Draw the first line\nG1 X0.4 Y200.0 Z0.3 F5000.0 ; Move to side a little\nG1 X0.4 Y20 Z0.3 F1500.0 E30 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.3 F5000.0 ; Move over to prevent blob squish"
|
||||
},
|
||||
|
||||
"gantry_height": { "value": 25 }
|
||||
}
|
||||
}
|
||||
}
|
||||
|
|
|
|||
|
|
@ -7,13 +7,6 @@
|
|||
"machine_width": { "default_value": 452 },
|
||||
"machine_depth": { "default_value": 468 },
|
||||
"machine_height": { "default_value": 482 },
|
||||
"machine_head_polygon": { "default_value": [
|
||||
[-26, 34],
|
||||
[-26, -32],
|
||||
[22, -32],
|
||||
[22, 34]
|
||||
]
|
||||
},
|
||||
"machine_head_with_fans_polygon": { "default_value": [
|
||||
[-26, 34],
|
||||
[-26, -32],
|
||||
|
|
|
|||
|
|
@ -8,13 +8,6 @@
|
|||
"machine_width": { "default_value": 220 },
|
||||
"machine_depth": { "default_value": 220 },
|
||||
"machine_height": { "default_value": 300 },
|
||||
"machine_head_polygon": { "default_value": [
|
||||
[-26, 34],
|
||||
[-26, -32],
|
||||
[22, -32],
|
||||
[22, 34]
|
||||
]
|
||||
},
|
||||
"machine_head_with_fans_polygon": { "default_value": [
|
||||
[-26, 34],
|
||||
[-26, -32],
|
||||
|
|
|
|||
|
|
@ -8,13 +8,6 @@
|
|||
"machine_width": { "default_value": 350 },
|
||||
"machine_depth": { "default_value": 350 },
|
||||
"machine_height": { "default_value": 400 },
|
||||
"machine_head_polygon": { "default_value": [
|
||||
[-26, 34],
|
||||
[-26, -32],
|
||||
[22, -32],
|
||||
[22, 34]
|
||||
]
|
||||
},
|
||||
"machine_head_with_fans_polygon": { "default_value": [
|
||||
[-26, 34],
|
||||
[-26, -32],
|
||||
|
|
|
|||
|
|
@ -27,14 +27,12 @@
|
|||
"machine_max_feedrate_z": { "default_value": 300 },
|
||||
"gantry_height": {"value": "43"},
|
||||
"layer_height": { "default_value": 0.1 },
|
||||
"relative_extrusion": { "default_value": false },
|
||||
"relative_extrusion": { "value": "False" },
|
||||
"retraction_combing": { "default_value": "off" },
|
||||
"retraction_hop_enabled": { "default_value": true },
|
||||
"retraction_hop_enabled": { "default_value": true },
|
||||
"retraction_hop_only_when_collides": { "default_value": false },
|
||||
"retraction_retract_speed": { "default_value": 100 },
|
||||
"retraction_speed": { "default_value": 100 },
|
||||
"retraction_amount": { "default_value": 4.5 },
|
||||
"retraction_prime_speed": { "default_value": 45 },
|
||||
"machine_start_gcode": {
|
||||
"default_value": "G21\nG90\nM82\nM106 S255\nG28\nG92 E0\nG1 Z100 F5000\nM190 S50\nM109 S200\nG1 X-135\nG1 Z0.3\nG92 E-32\nG1 E0 F1000\nG1 E50 F200\nG1 F1000\nG1 X-125\nG92 E0"
|
||||
},
|
||||
|
|
|
|||
|
|
@ -1,5 +1,4 @@
|
|||
{
|
||||
"id": "3DP-110F",
|
||||
"version": 2,
|
||||
"name": "Cubicon Single",
|
||||
"inherits": "cubicon_common",
|
||||
|
|
|
|||
|
|
@ -1,5 +1,4 @@
|
|||
{
|
||||
"id": "3DP-210F",
|
||||
"version": 2,
|
||||
"name": "Cubicon Style",
|
||||
"inherits": "cubicon_common",
|
||||
|
|
|
|||
|
|
@ -1,5 +1,4 @@
|
|||
{
|
||||
"id": "3DP-310F",
|
||||
"version": 2,
|
||||
"name": "Cubicon Single Plus",
|
||||
"inherits": "cubicon_common",
|
||||
|
|
|
|||
|
|
@ -23,77 +23,34 @@
|
|||
"travel_compensate_overlapping_walls_enabled": {
|
||||
"default_value": false
|
||||
},
|
||||
"travel_compensate_overlapping_walls_0_enabled": {
|
||||
"default_value": false
|
||||
},
|
||||
"travel_compensate_overlapping_walls_x_enabled": {
|
||||
"default_value": false
|
||||
},
|
||||
"layer_height": {
|
||||
"default_value": 0.2
|
||||
},
|
||||
"layer_height_0": {
|
||||
"default_value": 0.2
|
||||
},
|
||||
"infill_line_width": {
|
||||
"default_value": 0.6
|
||||
},
|
||||
"adhesion_type": {
|
||||
"default_value": "raft"
|
||||
},
|
||||
"roofing_pattern": { "default_value": "lines" },
|
||||
"top_bottom_pattern": { "default_value": "lines" },
|
||||
"top_bottom_pattern_0": {
|
||||
"default_value": "zigzag"
|
||||
},
|
||||
"fill_perimeter_gaps": { "default_value": "everywhere" },
|
||||
"infill_pattern": {
|
||||
"default_value": "zigzag"
|
||||
},
|
||||
"infill_sparse_density": { "default_value": 20 },
|
||||
"infill_overlap": {
|
||||
"default_value": 15
|
||||
},
|
||||
"infill_before_walls": { "default_value": false },
|
||||
"infill_sparse_thickness": { "default_value": 0.2 },
|
||||
"top_bottom_thickness": {
|
||||
"default_value": 1.0
|
||||
},
|
||||
"top_thickness": {
|
||||
"default_value": 1.0
|
||||
},
|
||||
"bottom_thickness": {
|
||||
"default_value": 0.6,
|
||||
"value": "top_bottom_thickness * 0.6"
|
||||
},
|
||||
"roofing_layer_count": {
|
||||
"default_value": 1
|
||||
},
|
||||
"skin_preshrink": { "default_value": true },
|
||||
"material_flow_layer_0": { "default_value": 100 },
|
||||
"top_skin_preshrink": { "default_value": 1.2 },
|
||||
"bottom_skin_preshrink": { "default_value": 1.2 },
|
||||
"max_skin_angle_for_expansion": { "default_value": 90 },
|
||||
"min_skin_width_for_expansion": { "default_value": 2.7475 },
|
||||
"skin_angles": { "default_value": "[135,45]" },
|
||||
"roofing_angles": { "default_value": "[135,45]" },
|
||||
"coasting_volume": { "default_value": 0.032 },
|
||||
"wall_thickness": { "default_value": 1.2 },
|
||||
"wall_line_count": { "default_value": 3 },
|
||||
"speed_wall_0": { "default_value": 25 },
|
||||
"skin_overlap": { "default_value": 5 },
|
||||
"cool_min_layer_time_fan_speed_max": { "default_value": 15 },
|
||||
"cool_min_layer_time": { "default_value": 15 },
|
||||
"support_roof_pattern": { "default_value": "zigzag" },
|
||||
"support_bottom_pattern": { "default_value": "zigzag" },
|
||||
"support_interface_pattern": { "default_value": "zigzag" },
|
||||
"support_pattern": { "default_value": "zigzag" },
|
||||
"retraction_amount": { "default_value": 1.5 },
|
||||
"top_layers": {
|
||||
"default_value": 5
|
||||
},
|
||||
"bottom_layers": {
|
||||
"default_value": 3
|
||||
}
|
||||
"retraction_amount": { "default_value": 1.5 }
|
||||
}
|
||||
}
|
||||
|
|
@ -52,9 +52,6 @@
|
|||
"speed_print": {
|
||||
"default_value": 60
|
||||
},
|
||||
"speed_travel": {
|
||||
"default_value": 100
|
||||
},
|
||||
"retraction_amount": {
|
||||
"default_value": 3.5
|
||||
},
|
||||
|
|
|
|||
|
|
@ -55,9 +55,6 @@
|
|||
"speed_print": {
|
||||
"default_value": 40
|
||||
},
|
||||
"speed_travel": {
|
||||
"default_value": 120
|
||||
},
|
||||
"retraction_amount": {
|
||||
"default_value": 3.8
|
||||
},
|
||||
|
|
|
|||
|
|
@ -55,9 +55,6 @@
|
|||
"speed_print": {
|
||||
"default_value": 40
|
||||
},
|
||||
"speed_travel": {
|
||||
"default_value": 120
|
||||
},
|
||||
"retraction_amount": {
|
||||
"default_value": 3.8
|
||||
},
|
||||
|
|
|
|||
|
|
@ -16,12 +16,8 @@
|
|||
"overrides": {
|
||||
"machine_name": { "default_value": "Delta Go" },
|
||||
"default_material_print_temperature": { "default_value": 210 },
|
||||
"speed_travel": { "default_value": 150 },
|
||||
"prime_tower_size": { "default_value": 8.66 },
|
||||
"infill_sparse_density": { "default_value": 10 },
|
||||
"speed_wall_x": { "default_value": 30 },
|
||||
"speed_wall_0": { "default_value": 30 },
|
||||
"speed_topbottom": { "default_value": 20 },
|
||||
"layer_height": { "default_value": 0.15 },
|
||||
"speed_print": { "default_value": 30 },
|
||||
"machine_heated_bed": { "default_value": false },
|
||||
|
|
|
|||
|
|
@ -15,15 +15,10 @@
|
|||
},
|
||||
|
||||
"overrides": {
|
||||
"speed_travel": { "default_value": 150 },
|
||||
"prime_tower_size": { "default_value": 8.660254037844387 },
|
||||
"infill_sparse_density": { "default_value": 10 },
|
||||
"speed_wall_x": { "default_value": 30 },
|
||||
"speed_wall_0": { "default_value": 30 },
|
||||
"speed_topbottom": { "default_value": 30 },
|
||||
"layer_height": { "default_value": 0.2 },
|
||||
"speed_print": { "default_value": 30 },
|
||||
"speed_infill": { "default_value": 30 },
|
||||
"machine_extruder_count": { "default_value": 1 },
|
||||
"machine_heated_bed": { "default_value": true },
|
||||
"machine_center_is_zero": { "default_value": true },
|
||||
|
|
|
|||
|
|
@ -37,7 +37,7 @@
|
|||
"retraction_amount" : { "default_value": 3.5 },
|
||||
"retraction_speed" : { "default_value": 30 },
|
||||
"retraction_combing" : { "default_value": "noskin" },
|
||||
"travel_avoid_distance": { "default_value": 1, "value": "1" },
|
||||
"travel_avoid_distance": { "value": "1" },
|
||||
"speed_print" : { "default_value": 80 },
|
||||
"speed_infill": { "value": "round(speed_print * 1.05, 0)" },
|
||||
"speed_topbottom": { "value": "round(speed_print * 0.95, 0)" },
|
||||
|
|
@ -45,7 +45,7 @@
|
|||
"speed_wall_0": { "value": "30" },
|
||||
"speed_wall_x": { "value": "speed_wall" },
|
||||
"speed_layer_0": { "value": "min(round(speed_print * 0.75, 0), 45.0)" },
|
||||
"speed_travel": { "default_value": 150, "value": 150 },
|
||||
"speed_travel": { "value": 150 },
|
||||
"speed_travel_layer_0": { "value": "round(speed_travel * 0.7, 0)" },
|
||||
"skirt_brim_speed": { "value": "speed_layer_0" },
|
||||
"skirt_line_count": { "default_value": 3 },
|
||||
|
|
@ -57,10 +57,10 @@
|
|||
"support_z_distance": { "value": "layer_height * 2" },
|
||||
"support_bottom_distance": { "value": "layer_height" },
|
||||
"support_use_towers" : { "default_value": false },
|
||||
"jerk_enabled": { "default_value": 1, "value": "1" },
|
||||
"jerk_infill" : { "default_value": 5, "value": "5" },
|
||||
"jerk_support" : { "default_value": 5, "value": "5" },
|
||||
"acceleration_enabled": { "default_value": 1, "value": "1" },
|
||||
"jerk_enabled": { "value": "True" },
|
||||
"jerk_infill" : { "value": "5" },
|
||||
"jerk_support" : { "value": "5" },
|
||||
"acceleration_enabled": { "value": "1" },
|
||||
"acceleration_travel" : { "value": 5000 },
|
||||
"machine_max_feedrate_z" : { "default_value": 300 }
|
||||
}
|
||||
|
|
|
|||
|
|
@ -49,27 +49,9 @@
|
|||
"top_bottom_thickness": {
|
||||
"default_value": 1
|
||||
},
|
||||
"bottom_thickness": {
|
||||
"default_value": 1
|
||||
},
|
||||
"speed_print": {
|
||||
"default_value": 75
|
||||
},
|
||||
"speed_infill": {
|
||||
"default_value": 100
|
||||
},
|
||||
"speed_wall": {
|
||||
"default_value": 25
|
||||
},
|
||||
"speed_topbottom": {
|
||||
"default_value": 15
|
||||
},
|
||||
"speed_travel": {
|
||||
"default_value": 150
|
||||
},
|
||||
"speed_layer_0": {
|
||||
"default_value": 30
|
||||
},
|
||||
"support_enable": {
|
||||
"default_value": true
|
||||
}
|
||||
|
|
|
|||
|
|
@ -56,57 +56,17 @@
|
|||
|
||||
"ironing_pattern": { "default_value": "concentric" },
|
||||
"ironing_flow": { "default_value": 7.0 },
|
||||
"roofing_pattern": { "default_value": "concentric" },
|
||||
|
||||
"infill_sparse_density": { "default_value": 20 },
|
||||
"infill_line_distance": { "default_value": 4 },
|
||||
|
||||
"default_material_print_temperature": { "default_value": 220 },
|
||||
"material_print_temperature": { "default_value": 220 },
|
||||
"material_print_temperature_layer_0": { "default_value": 220 },
|
||||
"material_initial_print_temperature": { "default_value": 220 },
|
||||
"material_final_print_temperature": { "default_value": 220 },
|
||||
"retraction_amount": { "default_value": 6.5 },
|
||||
|
||||
"speed_print": { "default_value": 40 },
|
||||
"speed_infill": { "default_value": 60 },
|
||||
"speed_wall": { "default_value": 20 },
|
||||
"speed_wall_0": { "default_value": 20 },
|
||||
"speed_wall_x": { "default_value": 40 },
|
||||
"speed_roofing": { "default_value": 20 },
|
||||
"speed_topbottom": { "default_value": 20 },
|
||||
"speed_support": { "default_value": 40 },
|
||||
"speed_support_infill": { "default_value": 40 },
|
||||
"speed_support_interface": { "default_value": 25 },
|
||||
"speed_support_roof": { "default_value": 25 },
|
||||
"speed_support_bottom": { "default_value": 25 },
|
||||
"speed_prime_tower": { "default_value": 40 },
|
||||
"speed_travel": { "default_value": 100 },
|
||||
"speed_layer_0": { "default_value": 20 },
|
||||
"speed_print_layer_0": { "default_value": 20 },
|
||||
"speed_travel_layer_0": { "default_value": 80 },
|
||||
"skirt_brim_speed": { "default_value": 20 },
|
||||
"speed_equalize_flow_enabled": { "default_value": true },
|
||||
"speed_equalize_flow_max": { "default_value": 100 },
|
||||
|
||||
"acceleration_print": { "default_value": 1000 },
|
||||
"acceleration_infill": { "default_value": 3000 },
|
||||
"acceleration_wall": { "default_value": 1000 },
|
||||
"acceleration_wall_0": { "default_value": 1000 },
|
||||
"acceleration_wall_x": { "default_value": 1000 },
|
||||
"acceleration_roofing": { "default_value": 1000 },
|
||||
"acceleration_topbottom": { "default_value": 1000 },
|
||||
"acceleration_support": { "default_value": 1000 },
|
||||
"acceleration_support_infill": { "default_value": 1000 },
|
||||
"acceleration_support_interface": { "default_value": 1000 },
|
||||
"acceleration_support_roof": { "default_value": 1000 },
|
||||
"acceleration_support_bottom": { "default_value": 1000 },
|
||||
"acceleration_prime_tower": { "default_value": 1000 },
|
||||
"acceleration_travel": { "default_value": 1500 },
|
||||
"acceleration_layer_0": { "default_value": 1000 },
|
||||
"acceleration_print_layer_0": { "default_value": 1000 },
|
||||
"acceleration_travel_layer_0": { "default_value": 1000 },
|
||||
"acceleration_skirt_brim": { "default_value": 1000 },
|
||||
|
||||
"jerk_print": { "default_value": 10 },
|
||||
|
||||
|
|
|
|||
|
|
@ -50,8 +50,8 @@
|
|||
"retraction_hop_enabled": { "default_value": false },
|
||||
"material_final_print_temperature": { "value": "material_print_temperature - 5" },
|
||||
"material_initial_print_temperature": { "value": "material_print_temperature" },
|
||||
"travel_avoid_distance": { "default_value": 1, "value": 1 },
|
||||
"speed_travel": { "default_value": 200, "value": 200 },
|
||||
"travel_avoid_distance": { "value": 1 },
|
||||
"speed_travel": { "value": 200 },
|
||||
"speed_infill": { "value": "round(speed_print * 1.05, 0)" },
|
||||
"speed_topbottom": { "value": "round(speed_print * 0.95, 0)" },
|
||||
"speed_wall": { "value": "speed_print" },
|
||||
|
|
|
|||
|
|
@ -6,7 +6,7 @@
|
|||
"type": "extruder",
|
||||
"author": "Ultimaker",
|
||||
"manufacturer": "Unknown",
|
||||
"setting_version": 10,
|
||||
"setting_version": 11,
|
||||
"visible": false,
|
||||
"position": "0"
|
||||
},
|
||||
|
|
|
|||
|
|
@ -7,7 +7,7 @@
|
|||
"author": "Ultimaker",
|
||||
"category": "Other",
|
||||
"manufacturer": "Unknown",
|
||||
"setting_version": 10,
|
||||
"setting_version": 11,
|
||||
"file_formats": "text/x-gcode;application/x-stl-ascii;application/x-stl-binary;application/x-wavefront-obj;application/x3g",
|
||||
"visible": false,
|
||||
"has_materials": true,
|
||||
|
|
@ -387,6 +387,16 @@
|
|||
"settable_per_extruder": false,
|
||||
"settable_per_meshgroup": false
|
||||
},
|
||||
"machine_extruders_share_heater":
|
||||
{
|
||||
"label": "Extruders Share Heater",
|
||||
"description": "Whether the extruders share a single heater rather than each extruder having its own heater.",
|
||||
"type": "bool",
|
||||
"default_value": false,
|
||||
"settable_per_mesh": false,
|
||||
"settable_per_extruder": false,
|
||||
"settable_per_meshgroup": false
|
||||
},
|
||||
"machine_disallowed_areas":
|
||||
{
|
||||
"label": "Disallowed Areas",
|
||||
|
|
@ -411,34 +421,6 @@
|
|||
"settable_per_extruder": false,
|
||||
"settable_per_meshgroup": false
|
||||
},
|
||||
"machine_head_polygon":
|
||||
{
|
||||
"label": "Machine Head Polygon",
|
||||
"description": "A 2D silhouette of the print head (fan caps excluded).",
|
||||
"type": "polygon",
|
||||
"default_value":
|
||||
[
|
||||
[
|
||||
-1,
|
||||
1
|
||||
],
|
||||
[
|
||||
-1,
|
||||
-1
|
||||
],
|
||||
[
|
||||
1,
|
||||
-1
|
||||
],
|
||||
[
|
||||
1,
|
||||
1
|
||||
]
|
||||
],
|
||||
"settable_per_mesh": false,
|
||||
"settable_per_extruder": false,
|
||||
"settable_per_meshgroup": false
|
||||
},
|
||||
"machine_head_with_fans_polygon":
|
||||
{
|
||||
"label": "Machine Head & Fan Polygon",
|
||||
|
|
@ -1190,6 +1172,18 @@
|
|||
"value": "999999 if infill_sparse_density == 100 else math.ceil(round(bottom_thickness / resolveOrValue('layer_height'), 4))",
|
||||
"limit_to_extruder": "top_bottom_extruder_nr",
|
||||
"settable_per_mesh": true
|
||||
},
|
||||
"initial_bottom_layers":
|
||||
{
|
||||
"label": "Initial Bottom Layers",
|
||||
"description": "The number of initial bottom layers, from the build-plate upwards. When calculated by the bottom thickness, this value is rounded to a whole number.",
|
||||
"minimum_value": "0",
|
||||
"minimum_value_warning": "2",
|
||||
"default_value": 6,
|
||||
"type": "int",
|
||||
"value": "bottom_layers",
|
||||
"limit_to_extruder": "top_bottom_extruder_nr",
|
||||
"settable_per_mesh": true
|
||||
}
|
||||
}
|
||||
}
|
||||
|
|
@ -2160,7 +2154,7 @@
|
|||
"minimum_value": "-273.15",
|
||||
"minimum_value_warning": "material_standby_temperature",
|
||||
"maximum_value_warning": "material_print_temperature",
|
||||
"enabled": "machine_nozzle_temp_enabled",
|
||||
"enabled": "machine_nozzle_temp_enabled and not machine_extruders_share_heater",
|
||||
"settable_per_mesh": false,
|
||||
"settable_per_extruder": true
|
||||
},
|
||||
|
|
@ -2175,7 +2169,7 @@
|
|||
"minimum_value": "-273.15",
|
||||
"minimum_value_warning": "material_standby_temperature",
|
||||
"maximum_value_warning": "material_print_temperature",
|
||||
"enabled": "machine_nozzle_temp_enabled",
|
||||
"enabled": "machine_nozzle_temp_enabled and not machine_extruders_share_heater",
|
||||
"settable_per_mesh": false,
|
||||
"settable_per_extruder": true
|
||||
},
|
||||
|
|
@ -2343,6 +2337,20 @@
|
|||
"settable_per_mesh": false,
|
||||
"settable_per_extruder": true
|
||||
},
|
||||
"material_break_preparation_temperature":
|
||||
{
|
||||
"label": "Break Preparation Temperature",
|
||||
"description": "The temperature used to purge material, should be roughly equal to the highest possible printing temperature.",
|
||||
"type": "float",
|
||||
"unit": "°C",
|
||||
"default_value": 50,
|
||||
"value": "material_print_temperature",
|
||||
"enabled": false,
|
||||
"minimum_value": "-273.15",
|
||||
"maximum_value_warning": "300",
|
||||
"settable_per_mesh": false,
|
||||
"settable_per_extruder": true
|
||||
},
|
||||
"material_break_retracted_position":
|
||||
{
|
||||
"label": "Break Retracted Position",
|
||||
|
|
@ -2701,7 +2709,6 @@
|
|||
"minimum_value": "0",
|
||||
"minimum_value_warning": "line_width * 1.5",
|
||||
"maximum_value_warning": "10",
|
||||
"enabled": false,
|
||||
"settable_per_mesh": false,
|
||||
"settable_per_extruder": true
|
||||
},
|
||||
|
|
@ -4071,7 +4078,7 @@
|
|||
"description": "The extruder train to use for printing the support. This is used in multi-extrusion.",
|
||||
"type": "extruder",
|
||||
"default_value": "0",
|
||||
"value": "defaultExtruderPosition()",
|
||||
"value": "int(defaultExtruderPosition())",
|
||||
"enabled": "(support_enable or support_tree_enable) and extruders_enabled_count > 1",
|
||||
"settable_per_mesh": false,
|
||||
"settable_per_extruder": false,
|
||||
|
|
@ -5038,7 +5045,7 @@
|
|||
"description": "The extruder train to use for printing the skirt/brim/raft. This is used in multi-extrusion.",
|
||||
"type": "extruder",
|
||||
"default_value": "0",
|
||||
"value": "defaultExtruderPosition()",
|
||||
"value": "int(defaultExtruderPosition())",
|
||||
"enabled": "extruders_enabled_count > 1 and (resolveOrValue('adhesion_type') != 'none' or resolveOrValue('prime_tower_brim_enable'))",
|
||||
"settable_per_mesh": false,
|
||||
"settable_per_extruder": false
|
||||
|
|
@ -5834,6 +5841,18 @@
|
|||
"settable_per_mesh": false,
|
||||
"settable_per_extruder": false
|
||||
},
|
||||
"meshfix_maximum_resolution":
|
||||
{
|
||||
"label": "Maximum Resolution",
|
||||
"description": "The minimum size of a line segment after slicing. If you increase this, the mesh will have a lower resolution. This may allow the printer to keep up with the speed it has to process g-code and will increase slice speed by removing details of the mesh that it can't process anyway.",
|
||||
"type": "float",
|
||||
"unit": "mm",
|
||||
"default_value": 0.5,
|
||||
"minimum_value": "0.001",
|
||||
"minimum_value_warning": "0.01",
|
||||
"maximum_value_warning": "3",
|
||||
"settable_per_mesh": true
|
||||
},
|
||||
"meshfix_maximum_travel_resolution":
|
||||
{
|
||||
"label": "Maximum Travel Resolution",
|
||||
|
|
@ -6218,6 +6237,7 @@
|
|||
"label": "Infill Travel Optimization",
|
||||
"description": "When enabled, the order in which the infill lines are printed is optimized to reduce the distance travelled. The reduction in travel time achieved very much depends on the model being sliced, infill pattern, density, etc. Note that, for some models that have many small areas of infill, the time to slice the model may be greatly increased.",
|
||||
"type": "bool",
|
||||
"enabled": "resolveOrValue('retraction_combing') != 'off'",
|
||||
"default_value": false,
|
||||
"settable_per_mesh": true
|
||||
},
|
||||
|
|
@ -6255,18 +6275,6 @@
|
|||
"settable_per_mesh": true,
|
||||
"settable_per_extruder": false
|
||||
},
|
||||
"meshfix_maximum_resolution":
|
||||
{
|
||||
"label": "Maximum Resolution",
|
||||
"description": "The minimum size of a line segment after slicing. If you increase this, the mesh will have a lower resolution. This may allow the printer to keep up with the speed it has to process g-code and will increase slice speed by removing details of the mesh that it can't process anyway.",
|
||||
"type": "float",
|
||||
"unit": "mm",
|
||||
"default_value": 0.5,
|
||||
"minimum_value": "0.001",
|
||||
"minimum_value_warning": "0.01",
|
||||
"maximum_value_warning": "3",
|
||||
"settable_per_mesh": true
|
||||
},
|
||||
"support_skip_some_zags":
|
||||
{
|
||||
"label": "Break Up Support In Chunks",
|
||||
|
|
@ -6429,16 +6437,6 @@
|
|||
"settable_per_mesh": false,
|
||||
"settable_per_extruder": true
|
||||
},
|
||||
"skin_alternate_rotation":
|
||||
{
|
||||
"label": "Alternate Skin Rotation",
|
||||
"description": "Alternate the direction in which the top/bottom layers are printed. Normally they are printed diagonally only. This setting adds the X-only and Y-only directions.",
|
||||
"type": "bool",
|
||||
"default_value": false,
|
||||
"enabled": "(top_layers > 0 or bottom_layers > 0) and top_bottom_pattern != 'concentric'",
|
||||
"limit_to_extruder": "top_bottom_extruder_nr",
|
||||
"settable_per_mesh": true
|
||||
},
|
||||
"cross_infill_pocket_size":
|
||||
{
|
||||
"label": "Cross 3D Pocket Size",
|
||||
|
|
@ -6595,7 +6593,7 @@
|
|||
"minimum_value_warning": "machine_nozzle_size * 3",
|
||||
"maximum_value_warning": "100.0",
|
||||
"type": "float",
|
||||
"enabled": "support_conical_enabled and support_enable",
|
||||
"enabled": "support_conical_enabled and support_enable and support_conical_angle > 0",
|
||||
"limit_to_extruder": "support_infill_extruder_nr",
|
||||
"settable_per_mesh": true
|
||||
},
|
||||
|
|
@ -6656,30 +6654,26 @@
|
|||
},
|
||||
"flow_rate_max_extrusion_offset":
|
||||
{
|
||||
"label": "Flow rate compensation max extrusion offset",
|
||||
"description": "The maximum distance in mm to compensate.",
|
||||
"label": "Flow Rate Compensation Max Extrusion Offset",
|
||||
"description": "The maximum distance in mm to move the filament to compensate for changes in flow rate.",
|
||||
"unit": "mm",
|
||||
"type": "float",
|
||||
"minimum_value": "0",
|
||||
"maximum_value_warning": "10",
|
||||
"default_value": 0,
|
||||
"value": "0",
|
||||
"enabled": true,
|
||||
"settable_per_mesh": false,
|
||||
"settable_per_extruder": false,
|
||||
"settable_per_meshgroup": false
|
||||
},
|
||||
"flow_rate_extrusion_offset_factor":
|
||||
{
|
||||
"label": "Flow rate compensation factor",
|
||||
"description": "The multiplication factor for the flow rate -> distance translation.",
|
||||
"label": "Flow Rate Compensation Factor",
|
||||
"description": "How far to move the filament in order to compensate for changes in flow rate, as a percentage of how far the filament would move in one second of extrusion.",
|
||||
"unit": "%",
|
||||
"type": "float",
|
||||
"minimum_value": "0",
|
||||
"maximum_value_warning": "100",
|
||||
"default_value": 100,
|
||||
"value": "100",
|
||||
"enabled": true,
|
||||
"settable_per_mesh": false,
|
||||
"settable_per_extruder": false,
|
||||
"settable_per_meshgroup": false
|
||||
|
|
@ -6702,7 +6696,7 @@
|
|||
"unit": "mm",
|
||||
"default_value": 3,
|
||||
"value": "machine_nozzle_head_distance",
|
||||
"minimum_value": "0.0001",
|
||||
"minimum_value": "0.001",
|
||||
"maximum_value_warning": "20",
|
||||
"enabled": "wireframe_enabled",
|
||||
"settable_per_mesh": false,
|
||||
|
|
@ -6732,7 +6726,7 @@
|
|||
"unit": "mm/s",
|
||||
"type": "float",
|
||||
"default_value": 5,
|
||||
"minimum_value": "0.1",
|
||||
"minimum_value": "0.05",
|
||||
"maximum_value": "math.sqrt(machine_max_feedrate_x ** 2 + machine_max_feedrate_y ** 2 + machine_max_feedrate_z ** 2)",
|
||||
"maximum_value_warning": "50",
|
||||
"enabled": "wireframe_enabled",
|
||||
|
|
@ -6748,11 +6742,11 @@
|
|||
"unit": "mm/s",
|
||||
"type": "float",
|
||||
"default_value": 5,
|
||||
"minimum_value": "0.1",
|
||||
"minimum_value": "0.05",
|
||||
"maximum_value": "math.sqrt(machine_max_feedrate_x ** 2 + machine_max_feedrate_y ** 2)",
|
||||
"maximum_value_warning": "50",
|
||||
"enabled": "wireframe_enabled",
|
||||
"value": "wireframe_printspeed",
|
||||
"value": "wireframe_printspeed_flat",
|
||||
"settable_per_mesh": false,
|
||||
"settable_per_extruder": false,
|
||||
"settable_per_meshgroup": false
|
||||
|
|
@ -6764,7 +6758,7 @@
|
|||
"unit": "mm/s",
|
||||
"type": "float",
|
||||
"default_value": 5,
|
||||
"minimum_value": "0.1",
|
||||
"minimum_value": "0.05",
|
||||
"maximum_value": "math.sqrt(machine_max_feedrate_x ** 2 + machine_max_feedrate_y ** 2 + machine_max_feedrate_z ** 2)",
|
||||
"maximum_value_warning": "50",
|
||||
"enabled": "wireframe_enabled",
|
||||
|
|
@ -6780,7 +6774,7 @@
|
|||
"unit": "mm/s",
|
||||
"type": "float",
|
||||
"default_value": 5,
|
||||
"minimum_value": "0.1",
|
||||
"minimum_value": "0.05",
|
||||
"maximum_value": "math.sqrt(machine_max_feedrate_x ** 2 + machine_max_feedrate_y ** 2 + machine_max_feedrate_z ** 2)",
|
||||
"maximum_value_warning": "50",
|
||||
"enabled": "wireframe_enabled",
|
||||
|
|
@ -6796,7 +6790,7 @@
|
|||
"unit": "mm/s",
|
||||
"type": "float",
|
||||
"default_value": 5,
|
||||
"minimum_value": "0.1",
|
||||
"minimum_value": "0.05",
|
||||
"maximum_value": "math.sqrt(machine_max_feedrate_x ** 2 + machine_max_feedrate_y ** 2)",
|
||||
"maximum_value_warning": "100",
|
||||
"value": "wireframe_printspeed",
|
||||
|
|
@ -6919,7 +6913,7 @@
|
|||
"default_value": 0.6,
|
||||
"minimum_value": "0",
|
||||
"maximum_value_warning": "2.0",
|
||||
"enabled": "wireframe_enabled",
|
||||
"enabled": "wireframe_enabled and wireframe_strategy == 'knot'",
|
||||
"settable_per_mesh": false,
|
||||
"settable_per_extruder": false,
|
||||
"settable_per_meshgroup": false
|
||||
|
|
@ -6933,7 +6927,7 @@
|
|||
"default_value": 0.5,
|
||||
"minimum_value": "0",
|
||||
"maximum_value_warning": "wireframe_height",
|
||||
"enabled": "wireframe_enabled",
|
||||
"enabled": "wireframe_enabled and wireframe_strategy == 'compensate'",
|
||||
"settable_per_mesh": false,
|
||||
"settable_per_extruder": false,
|
||||
"settable_per_meshgroup": false
|
||||
|
|
@ -6947,7 +6941,7 @@
|
|||
"default_value": 0.6,
|
||||
"minimum_value": "0",
|
||||
"maximum_value_warning": "wireframe_height",
|
||||
"enabled": "wireframe_enabled",
|
||||
"enabled": "wireframe_enabled and wireframe_strategy == 'compensate'",
|
||||
"settable_per_mesh": false,
|
||||
"settable_per_extruder": false,
|
||||
"settable_per_meshgroup": false
|
||||
|
|
@ -7070,17 +7064,18 @@
|
|||
"default_value": 0.01,
|
||||
"unit": "mm",
|
||||
"settable_per_mesh": false,
|
||||
"minimum_value": "0.0001",
|
||||
"minimum_value": "0.001",
|
||||
"settable_per_extruder": false,
|
||||
"settable_per_meshgroup": false
|
||||
},
|
||||
"adaptive_layer_height_threshold":
|
||||
{
|
||||
"label": "Adaptive Layers Threshold",
|
||||
"description": "Threshold whether to use a smaller layer or not. This number is compared to the tan of the steepest slope in a layer.",
|
||||
"label": "Adaptive Layers Topography Size",
|
||||
"description": "Target horizontal distance between two adjacent layers. Reducing this setting causes thinner layers to be used to bring the edges of the layers closer together.",
|
||||
"type": "float",
|
||||
"enabled": "adaptive_layer_height_enabled",
|
||||
"default_value": 200.0,
|
||||
"default_value": 0.2,
|
||||
"unit": "mm",
|
||||
"settable_per_mesh": false,
|
||||
"settable_per_extruder": false,
|
||||
"settable_per_meshgroup": false
|
||||
|
|
@ -7142,6 +7137,17 @@
|
|||
"enabled": "bridge_settings_enabled",
|
||||
"settable_per_mesh": true
|
||||
},
|
||||
"bridge_sparse_infill_max_density":
|
||||
{
|
||||
"label": "Bridge Sparse Infill Max Density",
|
||||
"description": "Maximum density of infill considered to be sparse. Skin over sparse infill is considered to be unsupported and so may be treated as a bridge skin.",
|
||||
"unit": "%",
|
||||
"type": "float",
|
||||
"default_value": 0,
|
||||
"minimum_value": "0",
|
||||
"enabled": "bridge_settings_enabled",
|
||||
"settable_per_mesh": true
|
||||
},
|
||||
"bridge_wall_coast":
|
||||
{
|
||||
"label": "Bridge Wall Coasting",
|
||||
|
|
@ -7376,6 +7382,7 @@
|
|||
"description": "Retract the filament when the nozzle is moving over a non-printed area.",
|
||||
"type": "bool",
|
||||
"default_value": true,
|
||||
"value": "retraction_enable",
|
||||
"enabled": "clean_between_layers",
|
||||
"settable_per_mesh": false,
|
||||
"settable_per_extruder": true,
|
||||
|
|
@ -7388,6 +7395,7 @@
|
|||
"unit": "mm",
|
||||
"type": "float",
|
||||
"default_value": 1,
|
||||
"value": "retraction_amount",
|
||||
"minimum_value_warning": "-0.0001",
|
||||
"maximum_value_warning": "10.0",
|
||||
"enabled": "wipe_retraction_enable and clean_between_layers",
|
||||
|
|
@ -7402,6 +7410,7 @@
|
|||
"unit": "mm³",
|
||||
"type": "float",
|
||||
"default_value": 0,
|
||||
"value": "retraction_extra_prime_amount",
|
||||
"minimum_value_warning": "-0.0001",
|
||||
"maximum_value_warning": "10.0",
|
||||
"enabled": "wipe_retraction_enable and clean_between_layers",
|
||||
|
|
@ -7415,6 +7424,7 @@
|
|||
"unit": "mm/s",
|
||||
"type": "float",
|
||||
"default_value": 5,
|
||||
"value": "retraction_speed",
|
||||
"minimum_value": "0",
|
||||
"minimum_value_warning": "1",
|
||||
"maximum_value": "machine_max_feedrate_e",
|
||||
|
|
@ -7436,13 +7446,13 @@
|
|||
"minimum_value_warning": "1",
|
||||
"maximum_value_warning": "70",
|
||||
"enabled": "wipe_retraction_enable and clean_between_layers",
|
||||
"value": "retraction_speed",
|
||||
"value": "wipe_retraction_speed",
|
||||
"settable_per_mesh": false,
|
||||
"settable_per_extruder": true
|
||||
},
|
||||
"wipe_retraction_prime_speed":
|
||||
{
|
||||
"label": "Retraction Prime Speed",
|
||||
"label": "Wipe Retraction Prime Speed",
|
||||
"description": "The speed at which the filament is primed during a wipe retraction move.",
|
||||
"unit": "mm/s",
|
||||
"type": "float",
|
||||
|
|
@ -7452,7 +7462,7 @@
|
|||
"minimum_value_warning": "1",
|
||||
"maximum_value_warning": "70",
|
||||
"enabled": "wipe_retraction_enable and clean_between_layers",
|
||||
"value": "retraction_speed",
|
||||
"value": "wipe_retraction_speed",
|
||||
"settable_per_mesh": false,
|
||||
"settable_per_extruder": true
|
||||
}
|
||||
|
|
@ -7473,10 +7483,11 @@
|
|||
},
|
||||
"wipe_hop_enable":
|
||||
{
|
||||
"label": "Wipe Z Hop When Retracted",
|
||||
"description": "Whenever a retraction is done, the build plate is lowered to create clearance between the nozzle and the print. It prevents the nozzle from hitting the print during travel moves, reducing the chance to knock the print from the build plate.",
|
||||
"label": "Wipe Z Hop",
|
||||
"description": "When wiping, the build plate is lowered to create clearance between the nozzle and the print. It prevents the nozzle from hitting the print during travel moves, reducing the chance to knock the print from the build plate.",
|
||||
"type": "bool",
|
||||
"default_value": true,
|
||||
"value": "retraction_hop_enabled",
|
||||
"enabled": "clean_between_layers",
|
||||
"settable_per_mesh": false,
|
||||
"settable_per_extruder": true,
|
||||
|
|
@ -7489,6 +7500,7 @@
|
|||
"unit": "mm",
|
||||
"type": "float",
|
||||
"default_value": 1,
|
||||
"value": "retraction_hop",
|
||||
"enabled": "wipe_hop_enable and clean_between_layers",
|
||||
"settable_per_mesh": false,
|
||||
"settable_per_extruder": true,
|
||||
|
|
@ -7500,7 +7512,8 @@
|
|||
"description": "Speed to move the z-axis during the hop.",
|
||||
"unit": "mm/s",
|
||||
"type": "float",
|
||||
"default_value": 100,
|
||||
"default_value": 10,
|
||||
"value": "speed_z_hop",
|
||||
"minimum_value": "0",
|
||||
"minimum_value_warning": "1",
|
||||
"enabled": "wipe_hop_enable and clean_between_layers",
|
||||
|
|
@ -7553,18 +7566,21 @@
|
|||
"type": "float",
|
||||
"minimum_value": "0",
|
||||
"default_value": 0,
|
||||
"settable_per_mesh": true
|
||||
},
|
||||
"small_feature_max_length":
|
||||
{
|
||||
"label": "Small Feature Max Length",
|
||||
"description": "Feature outlines that are shorter than this length will be printed using Small Feature Speed.",
|
||||
"unit": "mm",
|
||||
"type": "float",
|
||||
"minimum_value": "0",
|
||||
"default_value": 0,
|
||||
"value": "small_hole_max_size * math.pi",
|
||||
"settable_per_mesh": true
|
||||
"settable_per_mesh": true,
|
||||
"children":
|
||||
{
|
||||
"small_feature_max_length":
|
||||
{
|
||||
"label": "Small Feature Max Length",
|
||||
"description": "Feature outlines that are shorter than this length will be printed using Small Feature Speed.",
|
||||
"unit": "mm",
|
||||
"type": "float",
|
||||
"minimum_value": "0",
|
||||
"default_value": 0,
|
||||
"value": "small_hole_max_size * math.pi",
|
||||
"settable_per_mesh": true
|
||||
}
|
||||
}
|
||||
},
|
||||
"small_feature_speed_factor":
|
||||
{
|
||||
|
|
|
|||
|
|
@ -24,7 +24,6 @@
|
|||
|
||||
"layer_height": { "default_value": 0.15 },
|
||||
"layer_height_0": { "default_value": 0.2 },
|
||||
"speed_layer_0": { "default_value": 20},
|
||||
|
||||
"infill_sparse_density": { "default_value": 20 },
|
||||
"wall_thickness": { "default_value": 1 },
|
||||
|
|
@ -53,7 +52,6 @@
|
|||
"machine_center_is_zero": { "default_value": false },
|
||||
|
||||
"speed_print": { "default_value": 80 },
|
||||
"speed_travel": { "default_value": 200 },
|
||||
|
||||
"retraction_amount": { "default_value": 1 },
|
||||
"retraction_speed": { "default_value": 50},
|
||||
|
|
|
|||
|
|
@ -39,7 +39,6 @@
|
|||
"machine_center_is_zero": { "default_value": false },
|
||||
|
||||
"speed_print": { "default_value": 60 },
|
||||
"speed_travel": { "default_value": 200 },
|
||||
|
||||
"retraction_amount": { "default_value": 1 },
|
||||
"retraction_speed": { "default_value": 50},
|
||||
|
|
|
|||
|
|
@ -1,5 +1,4 @@
|
|||
{
|
||||
"id": "flsun_qq_s",
|
||||
"version": 2,
|
||||
"name": "FLSUN QQ-S",
|
||||
"inherits": "fdmprinter",
|
||||
|
|
@ -33,14 +32,8 @@
|
|||
"z_seam_type": {
|
||||
"default_value": "back"
|
||||
},
|
||||
"top_thickness": {
|
||||
"default_value": 5
|
||||
},
|
||||
"bottom_layers": {
|
||||
"default_value": 4
|
||||
},
|
||||
"gantry_height": {
|
||||
"default_value": 0
|
||||
"value": "0"
|
||||
},
|
||||
"machine_nozzle_size": {
|
||||
"default_value": 0.4
|
||||
|
|
|
|||
|
|
@ -1,5 +1,4 @@
|
|||
{
|
||||
"id": "geeetech_a30",
|
||||
"version": 2,
|
||||
"name": "Geeetech A30",
|
||||
"inherits": "fdmprinter",
|
||||
|
|
@ -42,9 +41,6 @@
|
|||
"material_diameter": {
|
||||
"default_value": 1.75
|
||||
},
|
||||
"material_bed_temperature": {
|
||||
"default_value": 60
|
||||
},
|
||||
"machine_nozzle_size": {
|
||||
"default_value": 0.4
|
||||
},
|
||||
|
|
@ -60,23 +56,9 @@
|
|||
"retraction_speed": {
|
||||
"default_value": 25
|
||||
},
|
||||
"retraction_retract_speed": {
|
||||
"default_value": 25
|
||||
},
|
||||
"retraction_prime_speed": {
|
||||
"default_value": 25
|
||||
},
|
||||
"adhesion_type": {
|
||||
"default_value": "skirt"
|
||||
},
|
||||
"machine_head_polygon": {
|
||||
"default_value": [
|
||||
[-75, 35],
|
||||
[18, 35],
|
||||
[18, -18],
|
||||
[-75, -18]
|
||||
]
|
||||
},
|
||||
"machine_head_with_fans_polygon": {
|
||||
"default_value": [
|
||||
[-75, 35],
|
||||
|
|
@ -86,7 +68,7 @@
|
|||
]
|
||||
},
|
||||
"gantry_height": {
|
||||
"default_value": 55
|
||||
"value": "55"
|
||||
},
|
||||
"machine_max_feedrate_x": {
|
||||
"default_value": 300
|
||||
|
|
|
|||
|
|
@ -1,5 +1,4 @@
|
|||
{
|
||||
"id": "gmax15plus",
|
||||
"version": 2,
|
||||
"name": "gMax 1.5 Plus",
|
||||
"inherits": "fdmprinter",
|
||||
|
|
@ -39,7 +38,6 @@
|
|||
"adhesion_type": { "default_value": "skirt" },
|
||||
"gantry_height": { "value": "50" },
|
||||
"speed_print": { "default_value": 50 },
|
||||
"speed_travel": { "default_value": 70 },
|
||||
"machine_max_acceleration_x": { "default_value": 600 },
|
||||
"machine_max_acceleration_y": { "default_value": 600 },
|
||||
"machine_max_acceleration_z": { "default_value": 30 },
|
||||
|
|
@ -50,9 +48,7 @@
|
|||
"machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
|
||||
"machine_start_gcode": { "default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 ;Home X/Y/Z\nM104 S{material_print_temperature} ; Preheat\nM109 S{material_print_temperature} ; Preheat\nG91 ;relative positioning\nG90 ;absolute positioning\nG1 Z25.0 F9000 ;raise nozzle 25mm\nG92 E0 ;zero the extruded length again\nG1 F9000\n;Put printing message on LCD screen\nM117 Printing..." },
|
||||
"machine_end_gcode": { "default_value": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning" },
|
||||
"material_print_temperature": { "default_value": 202 },
|
||||
"wall_thickness": { "default_value": 1 },
|
||||
"top_bottom_thickness": { "default_value": 1 },
|
||||
"bottom_thickness": { "default_value": 1 }
|
||||
"top_bottom_thickness": { "default_value": 1 }
|
||||
}
|
||||
}
|
||||
|
|
|
|||
|
|
@ -1,5 +1,4 @@
|
|||
{
|
||||
"id": "gmax15plus_dual",
|
||||
"version": 2,
|
||||
"name": "gMax 1.5 Plus Dual Extruder",
|
||||
"inherits": "fdmprinter",
|
||||
|
|
@ -37,7 +36,6 @@
|
|||
"adhesion_type": { "default_value": "skirt" },
|
||||
"gantry_height": { "value": "50" },
|
||||
"speed_print": { "default_value": 50 },
|
||||
"speed_travel": { "default_value": 70 },
|
||||
"machine_max_acceleration_x": { "default_value": 600 },
|
||||
"machine_max_acceleration_y": { "default_value": 600 },
|
||||
"machine_max_acceleration_z": { "default_value": 30 },
|
||||
|
|
@ -48,9 +46,7 @@
|
|||
"machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
|
||||
"machine_start_gcode": { "default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 ;Home X/Y/Z\nM104 S{material_print_temperature} T0 ; Preheat Left Extruder\nM104 S{material_print_temperature} T1 ; Preheat Right Extruder\nM109 S{material_print_temperature} T0 ; Preheat Left Extruder\nM109 S{material_print_temperature} T1 ; Preheat Right Extruder\nG91 ;relative positioning\nG90 ;absolute positioning\nM218 T1 X34.3 Y0; Set 2nd extruder offset. This can be changed later if needed\nG1 Z25.0 F9000 ;raise nozzle 25mm\nG92 E0 ;zero the extruded length again\nG1 F9000\n;Put printing message on LCD screen\nM117 Printing..." },
|
||||
"machine_end_gcode": { "default_value": "M104 S0 T0;Left extruder off\nM104 S0 T1; Right extruder off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning" },
|
||||
"material_print_temperature": { "default_value": 202 },
|
||||
"wall_thickness": { "default_value": 1 },
|
||||
"top_bottom_thickness": { "default_value": 1 },
|
||||
"bottom_thickness": { "default_value": 1 }
|
||||
"top_bottom_thickness": { "default_value": 1 }
|
||||
}
|
||||
}
|
||||
|
|
|
|||
|
|
@ -28,7 +28,7 @@
|
|||
"machine_center_is_zero": {
|
||||
"default_value": false
|
||||
},
|
||||
"machine_head_polygon": {
|
||||
"machine_head_with_fans_polygon": {
|
||||
"default_value": [
|
||||
[-75, -18],
|
||||
[-75, 35],
|
||||
|
|
|
|||
|
|
@ -26,28 +26,15 @@
|
|||
"machine_height": { "default_value": 190 },
|
||||
"machine_heated_bed": { "default_value": true },
|
||||
"machine_center_is_zero": { "default_value": false },
|
||||
"material_print_temperature": { "default_value": 200 },
|
||||
"material_bed_temperature": { "default_value": 60 },
|
||||
"line_width": { "default_value": 0.48 },
|
||||
"layer_height": { "default_value": 0.2 },
|
||||
"layer_height_0": { "default_value": 0.2 },
|
||||
"wall_line_count": { "default_value": 3 },
|
||||
"wall_thickness": { "default_value": 1.2 },
|
||||
"top_bottom_thickness": { "default_value": 1.2 },
|
||||
"infill_sparse_density": { "default_value": 20 },
|
||||
"infill_overlap": { "default_value": 15 },
|
||||
"speed_print": { "default_value": 60 },
|
||||
"speed_travel": { "default_value": 160 },
|
||||
"speed_layer_0": { "default_value": 30 },
|
||||
"speed_wall_x": { "default_value": 35 },
|
||||
"speed_wall_0": { "default_value": 30 },
|
||||
"speed_infill": { "default_value": 60 },
|
||||
"speed_topbottom": { "default_value": 20 },
|
||||
"skirt_brim_speed": { "default_value": 35 },
|
||||
"skirt_line_count": { "default_value": 4 },
|
||||
"skirt_brim_minimal_length": { "default_value": 30 },
|
||||
"skirt_gap": { "default_value": 6 },
|
||||
"cool_fan_full_at_height": { "default_value": 0.4 },
|
||||
"retraction_speed": { "default_value": 15.0},
|
||||
"retraction_amount": { "default_value": 1.5}
|
||||
}
|
||||
|
|
|
|||
|
|
@ -32,7 +32,7 @@
|
|||
"machine_center_is_zero": {
|
||||
"default_value": true
|
||||
},
|
||||
"machine_head_polygon": {
|
||||
"machine_head_with_fans_polygon": {
|
||||
"default_value": [
|
||||
[-43.7, -19.2],
|
||||
[-43.7, 55],
|
||||
|
|
@ -61,36 +61,10 @@
|
|||
"top_bottom_thickness": {
|
||||
"default_value": 1.2
|
||||
},
|
||||
"material_print_temperature": {
|
||||
"default_value": 205
|
||||
},
|
||||
"material_bed_temperature": {
|
||||
"default_value": 60
|
||||
},
|
||||
"speed_print": {
|
||||
"default_value": 50
|
||||
},
|
||||
"speed_wall_0": {
|
||||
"default_value": 25
|
||||
},
|
||||
"speed_wall_x": {
|
||||
"default_value": 40
|
||||
},
|
||||
"speed_infill": {
|
||||
"default_value": 80
|
||||
},
|
||||
"speed_topbottom": {
|
||||
"default_value": 30
|
||||
},
|
||||
"speed_support_interface":
|
||||
{
|
||||
"default_value": 20
|
||||
},
|
||||
"speed_travel": {
|
||||
"default_value": 150
|
||||
},
|
||||
"speed_layer_0": {
|
||||
"default_value": 30.0,
|
||||
"minimum_value": 0.1
|
||||
}
|
||||
}
|
||||
|
|
|
|||
|
|
@ -47,12 +47,6 @@
|
|||
"material_diameter": {
|
||||
"default_value": 1.75
|
||||
},
|
||||
"material_print_temperature": {
|
||||
"default_value": 215
|
||||
},
|
||||
"material_bed_temperature": {
|
||||
"default_value": 67
|
||||
},
|
||||
"layer_height_0": {
|
||||
"default_value": 0.12
|
||||
},
|
||||
|
|
@ -62,21 +56,6 @@
|
|||
"speed_print": {
|
||||
"default_value": 40
|
||||
},
|
||||
"speed_infill": {
|
||||
"default_value": 40
|
||||
},
|
||||
"speed_wall": {
|
||||
"default_value": 35
|
||||
},
|
||||
"speed_topbottom": {
|
||||
"default_value": 35
|
||||
},
|
||||
"speed_travel": {
|
||||
"default_value": 120
|
||||
},
|
||||
"speed_layer_0": {
|
||||
"default_value": 12
|
||||
},
|
||||
"support_enable": {
|
||||
"default_value": true
|
||||
},
|
||||
|
|
|
|||
|
|
@ -47,12 +47,6 @@
|
|||
"material_diameter": {
|
||||
"default_value": 1.75
|
||||
},
|
||||
"material_print_temperature": {
|
||||
"default_value": 210
|
||||
},
|
||||
"material_bed_temperature": {
|
||||
"default_value": 65
|
||||
},
|
||||
"layer_height_0": {
|
||||
"default_value": 0.12
|
||||
},
|
||||
|
|
@ -62,21 +56,6 @@
|
|||
"speed_print": {
|
||||
"default_value": 35
|
||||
},
|
||||
"speed_infill": {
|
||||
"default_value": 40
|
||||
},
|
||||
"speed_wall": {
|
||||
"default_value": 30
|
||||
},
|
||||
"speed_topbottom": {
|
||||
"default_value": 20
|
||||
},
|
||||
"speed_travel": {
|
||||
"default_value": 100
|
||||
},
|
||||
"speed_layer_0": {
|
||||
"default_value": 12
|
||||
},
|
||||
"support_enable": {
|
||||
"default_value": true
|
||||
},
|
||||
|
|
|
|||
|
|
@ -49,12 +49,6 @@
|
|||
"material_diameter": {
|
||||
"default_value": 1.75
|
||||
},
|
||||
"material_print_temperature": {
|
||||
"default_value": 215
|
||||
},
|
||||
"material_bed_temperature": {
|
||||
"default_value": 67
|
||||
},
|
||||
"layer_height_0": {
|
||||
"default_value": 0.12
|
||||
},
|
||||
|
|
@ -64,21 +58,6 @@
|
|||
"speed_print": {
|
||||
"default_value": 40
|
||||
},
|
||||
"speed_infill": {
|
||||
"default_value": 40
|
||||
},
|
||||
"speed_wall": {
|
||||
"default_value": 35
|
||||
},
|
||||
"speed_topbottom": {
|
||||
"default_value": 35
|
||||
},
|
||||
"speed_travel": {
|
||||
"default_value": 120
|
||||
},
|
||||
"speed_layer_0": {
|
||||
"default_value": 12
|
||||
},
|
||||
"support_enable": {
|
||||
"default_value": true
|
||||
},
|
||||
|
|
|
|||
|
|
@ -47,12 +47,6 @@
|
|||
"material_diameter": {
|
||||
"default_value": 1.75
|
||||
},
|
||||
"material_print_temperature": {
|
||||
"default_value": 200
|
||||
},
|
||||
"material_bed_temperature": {
|
||||
"default_value": 60
|
||||
},
|
||||
"layer_height_0": {
|
||||
"default_value": 0.2
|
||||
},
|
||||
|
|
@ -62,21 +56,6 @@
|
|||
"speed_print": {
|
||||
"default_value": 60
|
||||
},
|
||||
"speed_infill": {
|
||||
"default_value": 60
|
||||
},
|
||||
"speed_wall": {
|
||||
"default_value": 30
|
||||
},
|
||||
"speed_topbottom": {
|
||||
"default_value": 45
|
||||
},
|
||||
"speed_travel": {
|
||||
"default_value": 125
|
||||
},
|
||||
"speed_layer_0": {
|
||||
"default_value": 30
|
||||
},
|
||||
"support_enable": {
|
||||
"default_value": true
|
||||
},
|
||||
|
|
|
|||
|
|
@ -22,7 +22,7 @@
|
|||
},
|
||||
"machine_end_gcode": {
|
||||
"default_value": "; -- END GCODE --\nM104 S0 ;turn off nozzle heater\nM140 S0 ;turn off bed heater\nG91 ;set to relative positioning\nG1 E-10 F300 ;retract the filament slightly\nG90 ;set to absolute positioning\nG28 X0 Y0 F600 ;move to the X/Y-axis origin (Home)\nM84 ;turn off stepper motors\n; -- end of END GCODE --"
|
||||
},
|
||||
},
|
||||
"machine_width": {
|
||||
"default_value": 280
|
||||
},
|
||||
|
|
@ -47,12 +47,6 @@
|
|||
"material_diameter": {
|
||||
"default_value": 1.75
|
||||
},
|
||||
"material_print_temperature": {
|
||||
"default_value": 210
|
||||
},
|
||||
"material_bed_temperature": {
|
||||
"default_value": 55
|
||||
},
|
||||
"layer_height_0": {
|
||||
"default_value": 0.2
|
||||
},
|
||||
|
|
@ -62,21 +56,6 @@
|
|||
"speed_print": {
|
||||
"default_value": 60
|
||||
},
|
||||
"speed_infill": {
|
||||
"default_value": 60
|
||||
},
|
||||
"speed_wall": {
|
||||
"default_value": 30
|
||||
},
|
||||
"speed_topbottom": {
|
||||
"default_value": 45
|
||||
},
|
||||
"speed_travel": {
|
||||
"default_value": 125
|
||||
},
|
||||
"speed_layer_0": {
|
||||
"default_value": 20
|
||||
},
|
||||
"support_enable": {
|
||||
"default_value": true
|
||||
},
|
||||
|
|
|
|||
|
|
@ -21,25 +21,14 @@
|
|||
"machine_end_gcode": {
|
||||
"default_value": " M104 S0 ;extruder heater off\n M140 S0 ;heated bed heater off (if you have it)\n G91 ;relative positioning\n G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\n G1 Z+0.5 E-5 X-20 Y-20 F{speed_travel} ;move Z up a bit and retract filament even more\n G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\n M84 ;steppers off\n G90 ;absolute positioning\n"
|
||||
},
|
||||
"material_bed_temperature": { "default_value": 100 },
|
||||
"layer_height": { "default_value": 0.2 },
|
||||
"support_angle": { "default_value": 30 },
|
||||
"infill_overlap": { "default_value": 30 },
|
||||
"layer_height_0": { "default_value": 0.2 },
|
||||
"speed_print": { "default_value": 80 },
|
||||
"speed_wall_0": { "default_value": 30 },
|
||||
"speed_travel": { "default_value": 150 },
|
||||
"brim_line_count": { "default_value": 15 },
|
||||
"skin_overlap": { "default_value": 30 },
|
||||
"prime_tower_size": { "default_value": 8.660254037844387 },
|
||||
"bottom_thickness": { "default_value": 0.8 },
|
||||
"retraction_amount": { "default_value": 3 },
|
||||
"speed_topbottom": { "default_value": 80 },
|
||||
"material_print_temperature": { "default_value": 230 },
|
||||
"support_pattern": { "default_value": "grid" },
|
||||
"speed_infill": { "default_value": 80 },
|
||||
"infill_sparse_density": { "default_value": 10 },
|
||||
"top_thickness": { "default_value": 0.8 },
|
||||
"machine_extruder_count": { "default_value": 1 },
|
||||
"retraction_combing": { "default_value": "off" },
|
||||
"machine_heated_bed": { "default_value": true },
|
||||
|
|
|
|||
65
resources/definitions/key3d_tyro.def.json
Normal file
65
resources/definitions/key3d_tyro.def.json
Normal file
|
|
@ -0,0 +1,65 @@
|
|||
{
|
||||
"name": "Tyro",
|
||||
"version": 2,
|
||||
"inherits": "fdmprinter",
|
||||
"metadata": {
|
||||
"visible": true,
|
||||
"author": "DragonJe",
|
||||
"manufacturer": "Key3D",
|
||||
"file_formats": "text/x-gcode",
|
||||
"platform_offset": [0, 0, 0],
|
||||
"has_materials": true,
|
||||
"has_variants": false,
|
||||
"preferred_quality_type": "normal",
|
||||
"has_machine_quality": true,
|
||||
"preferred_material": "generic_pla",
|
||||
"machine_extruder_trains":
|
||||
{
|
||||
"0": "key3d_tyro_extruder_0"
|
||||
}
|
||||
},
|
||||
|
||||
"overrides": {
|
||||
"machine_name": {
|
||||
"default_value": "Tyro"
|
||||
},
|
||||
"machine_width": {
|
||||
"default_value": 150
|
||||
},
|
||||
"machine_height": {
|
||||
"default_value": 150
|
||||
},
|
||||
"machine_depth": {
|
||||
"default_value": 150
|
||||
},
|
||||
"machine_head_with_fans_polygon": {
|
||||
"default_value": [
|
||||
[-30, 34],
|
||||
[-30, -32],
|
||||
[30, -32],
|
||||
[30, 34]
|
||||
]
|
||||
},
|
||||
"gantry_height": {
|
||||
"value": "30"
|
||||
},
|
||||
"machine_heated_bed": {
|
||||
"default_value": false
|
||||
},
|
||||
"machine_heated_build_volume": {
|
||||
"default_value": false
|
||||
},
|
||||
"material_diameter": {
|
||||
"default_value": 1.75
|
||||
},
|
||||
"machine_gcode_flavor": {
|
||||
"default_value": "RepRap (Marlin/Sprinter)"
|
||||
},
|
||||
"machine_start_gcode": {
|
||||
"default_value": "G28 ; Home\nG1 Z15.0 F6000 ; Move Z axis up 15mm\n ; Prime the extruder\nG92 E0\nG1 F200 E3\nG92 E0"
|
||||
},
|
||||
"machine_end_gcode": {
|
||||
"default_value": "M104 S0\nM140 S0\n ; Retract the filament\nG92 E1\nG1 E-1 F300\nG28 X0 Y0\nM84"
|
||||
}
|
||||
}
|
||||
}
|
||||
|
|
@ -18,12 +18,12 @@
|
|||
"supports_usb_connection": false,
|
||||
"machine_extruder_trains":
|
||||
{
|
||||
"0": "alya3dp_extruder_0"
|
||||
"0": "kupido_extruder_0"
|
||||
}
|
||||
},
|
||||
|
||||
"overrides": {
|
||||
"machine_name": { "default_value": "ALYA 3DP" },
|
||||
"machine_name": { "default_value": "KUPIDO" },
|
||||
"machine_heated_bed": { "default_value": true },
|
||||
"machine_width": { "default_value": 195 },
|
||||
"machine_height": { "default_value": 190 },
|
||||
|
|
|
|||
115
resources/definitions/leapfrog_bolt_pro.def.json
Normal file
115
resources/definitions/leapfrog_bolt_pro.def.json
Normal file
|
|
@ -0,0 +1,115 @@
|
|||
{
|
||||
"version": 2,
|
||||
"name": "Leapfrog Bolt Pro",
|
||||
"inherits": "fdmprinter",
|
||||
"metadata": {
|
||||
"visible": true,
|
||||
"author": "Karan and Vincent 20191104",
|
||||
"manufacturer": "Leapfrog B.V.",
|
||||
"category": "Other",
|
||||
"platform": "leapfrog_bolt_pro_platform.stl",
|
||||
"platform_offset": [0, 0, -14],
|
||||
"file_formats": "text/x-gcode",
|
||||
"supports_usb_connection": false,
|
||||
"supports_network_connection": false,
|
||||
"has_materials": true,
|
||||
"has_machine_quality": true,
|
||||
"has_variants": true,
|
||||
"preferred_variant_name": "Brass 0.4",
|
||||
"preferred_material": "leapfrog_epla_natural",
|
||||
"variants_name": "Hot end",
|
||||
"exclude_materials": [
|
||||
"generic_pla_175",
|
||||
"generic_abs_175",
|
||||
"generic_cpe_175",
|
||||
"generic_hips_175",
|
||||
"generic_nylon_175",
|
||||
"generic_pc_175",
|
||||
"generic_petg_175",
|
||||
"generic_pva_175",
|
||||
"generic_tpu_175",
|
||||
"chromatik_pla",
|
||||
"dsm_arnitel2045_175",
|
||||
"dsm_novamid1070_175",
|
||||
"emotiontech_abs",
|
||||
"emotiontech_petg",
|
||||
"emotiontech_pla",
|
||||
"emotiontech_pva-m",
|
||||
"emotiontech_pva-oks",
|
||||
"emotiontech_pva-s",
|
||||
"emotiontech_tpu98a",
|
||||
"fabtotum_abs",
|
||||
"fabtotum_nylon",
|
||||
"fabtotum_pla",
|
||||
"fabtotum_tpu",
|
||||
"fiberlogy_hd_pla",
|
||||
"filo3d_pla",
|
||||
"filo3d_pla_green",
|
||||
"filo3d_pla_red",
|
||||
"imade3d_petg_175",
|
||||
"imade3d_pla_175",
|
||||
"innofill_innoflex60_175",
|
||||
"octofiber_pla",
|
||||
"polyflex_pla",
|
||||
"polymax_pla",
|
||||
"polyplus_pla",
|
||||
"polywood_pla",
|
||||
"tizyx_abs",
|
||||
"tizyx_pla",
|
||||
"tizyx_flex",
|
||||
"tizyx_petg",
|
||||
"tizyx_pva",
|
||||
"tizyx_pla_bois",
|
||||
"verbatim_bvoh_175",
|
||||
"Vertex_Delta_ABS",
|
||||
"Vertex_Delta_PET",
|
||||
"Vertex_Delta_PLA_Glitter",
|
||||
"Vertex_Delta_PLA_Mat",
|
||||
"Vertex_Delta_PLA_Satin",
|
||||
"Vertex_Delta_PLA_Wood",
|
||||
"Vertex_Delta_PLA",
|
||||
"Vertex_Delta_TPU",
|
||||
"zyyx_pro_flex",
|
||||
"zyyx_pro_pla"
|
||||
],
|
||||
"machine_extruder_trains":
|
||||
{
|
||||
"0": "leapfrog_bolt_pro_extruder_right",
|
||||
"1": "leapfrog_bolt_pro_extruder_left"
|
||||
}
|
||||
},
|
||||
"overrides": {
|
||||
"machine_name": {"default_value": "Leapfrog Bolt Pro" },
|
||||
"machine_extruder_count": {"default_value": 2},
|
||||
"machine_center_is_zero": {"default_value": false},
|
||||
"machine_width": {"default_value": 302},
|
||||
"machine_height": {"default_value": 205},
|
||||
"machine_depth": {"default_value": 322},
|
||||
"machine_heated_bed": {"default_value": true},
|
||||
"machine_head_with_fans_polygon": {"default_value": [[-60, 110 ], [-60, -45], [60, -45 ], [60, 110]]},
|
||||
"machine_max_feedrate_z": {"default_value": 16.7 },
|
||||
"machine_max_feedrate_e": {"default_value": 50 },
|
||||
"machine_max_acceleration_z": {"default_value": 100 },
|
||||
"machine_acceleration": {"default_value": 400 },
|
||||
"machine_max_jerk_xy": {"default_value": 20 },
|
||||
"machine_max_jerk_z": {"default_value": 0.4 },
|
||||
"machine_max_jerk_e": {"default_value": 5 },
|
||||
"machine_gcode_flavor": {"default_value": "RepRap (Marlin/Sprinter)"},
|
||||
"material_final_print_temperature": {"value": "default_material_print_temperature" },
|
||||
"material_initial_print_temperature": {"value": "default_material_print_temperature" },
|
||||
"gantry_height": {"value": "20"},
|
||||
"retraction_combing": { "default_value": "all" },
|
||||
"retraction_amount": {"default_value": 2},
|
||||
"adhesion_type": {"default_value": "skirt"},
|
||||
"skirt_line_count": {"default_value": 3},
|
||||
"machine_use_extruder_offset_to_offset_coords": {"default_value": true},
|
||||
"machine_start_gcode": {"default_value": "G90\nG28 X0 Y0 Z0\nG1 Z5 F1000\nG92 E0\nG1 Y-32 F12000\nG1 E15 F1000\nG1 E45 F150\nG4 S5"},
|
||||
"machine_end_gcode": {"default_value": "G92 E0\nG1 E-3 F300\nM104 S0 T0\nM104 S0 T1\nM140 S0\nG28 X0 Y0\nM84"},
|
||||
"prime_tower_enable": { "resolve": "extruders_enabled_count > 1"},
|
||||
"prime_tower_position_x": {"value": "169" },
|
||||
"prime_tower_position_y": {"value": "25" },
|
||||
"speed_travel": { "value": "200" },
|
||||
"build_volume_temperature": {"enabled": false},
|
||||
"material_standby_temperature": {"enabled": false }
|
||||
}
|
||||
}
|
||||
|
|
@ -32,7 +32,7 @@
|
|||
"machine_center_is_zero": {
|
||||
"default_value": false
|
||||
},
|
||||
"machine_head_polygon": {
|
||||
"machine_head_with_fans_polygon": {
|
||||
"default_value": [
|
||||
[-75, -18],
|
||||
[-75, 35],
|
||||
|
|
|
|||
|
|
@ -32,7 +32,7 @@
|
|||
"machine_center_is_zero": {
|
||||
"default_value": false
|
||||
},
|
||||
"machine_head_polygon": {
|
||||
"machine_head_with_fans_polygon": {
|
||||
"default_value": [
|
||||
[-75, -18],
|
||||
[-75, 35],
|
||||
|
|
|
|||
68
resources/definitions/makeblock_mcreate.def.json
Normal file
68
resources/definitions/makeblock_mcreate.def.json
Normal file
|
|
@ -0,0 +1,68 @@
|
|||
{
|
||||
"version": 2,
|
||||
"name": "Makeblock mCreate",
|
||||
"inherits": "fdmprinter",
|
||||
"metadata": {
|
||||
"author": "Makeblock",
|
||||
"manufacturer": "Makeblock",
|
||||
"visible": true,
|
||||
"file_formats": "application/gzip;text/x-gcode",
|
||||
"has_machine_quality": true,
|
||||
"preferred_quality_type": "normal",
|
||||
"machine_extruder_trains": {
|
||||
"0": "makeblock_mcreate_extruder_0"
|
||||
}
|
||||
},
|
||||
"overrides": {
|
||||
"machine_name": {
|
||||
"default_value": "Makeblock mCreate"
|
||||
},
|
||||
"machine_width": {
|
||||
"default_value": 225
|
||||
},
|
||||
"machine_depth": {
|
||||
"default_value": 225
|
||||
},
|
||||
"machine_height": {
|
||||
"default_value": 300
|
||||
},
|
||||
"machine_heated_bed": {
|
||||
"default_value": true
|
||||
},
|
||||
"machine_head_with_fans_polygon": {
|
||||
"default_value": [
|
||||
[
|
||||
0,
|
||||
0
|
||||
],
|
||||
[
|
||||
0,
|
||||
0
|
||||
],
|
||||
[
|
||||
0,
|
||||
0
|
||||
],
|
||||
[
|
||||
0,
|
||||
0
|
||||
]
|
||||
]
|
||||
},
|
||||
"machine_gcode_flavor": {
|
||||
"default_value": "Marlin"
|
||||
},
|
||||
"gantry_height": {
|
||||
"value": 15.0
|
||||
},
|
||||
"machine_extruder_count": {
|
||||
"default_value": 1
|
||||
},
|
||||
"machine_start_gcode": {
|
||||
"default_value": "; Mcreate Start Gcode \nG28 ; Home all axes \nG92 E0 ; Reset Extruder\nG1 X0 Y0 Z15 F3000.0 ; Move to start position \nG1 E10 F400 ;load filament \nG1 E2 F400 ;retarct filament \nG92 E0 ; Reset Extruder \nG1 X0 Y130 Z15 F3000.0 \nG12 ; clean nozzle \nG1 X0 Y0 Z0.3 F3000.0 ; Move to start position \nG1 E9.0 F400 ;loadsome filament \nG92 E0 ; Reset Extruder \n; End of start GCode"
|
||||
},
|
||||
"machine_end_gcode": {
|
||||
"default_value": "; Mcreate end Gcode \nG4 ; Wait command in buffer have finished \nG92 E0 \nG1 E-2 F300; retract filament \nG28 X Z; home x z axis \nG1 F3000 Y220;Move Heat Bed to the front for easy print removal \nM104 S0; Turn off the nozzle heat \nM140 S0; Turn off the bed heat \nM107 ; Turn off the Fan \nM84 ; Disable stepper motors \n; End of GCode"
|
||||
}
|
||||
}
|
||||
}
|
||||
|
|
@ -77,27 +77,12 @@
|
|||
"retraction_amount": {
|
||||
"default_value": 6
|
||||
},
|
||||
"retraction_min_travel": {
|
||||
"default_value": 1.5
|
||||
},
|
||||
"speed_travel": {
|
||||
"default_value": 150
|
||||
},
|
||||
"speed_print": {
|
||||
"default_value": 60
|
||||
},
|
||||
"wall_thickness": {
|
||||
"default_value": 1.2
|
||||
},
|
||||
"bottom_thickness": {
|
||||
"default_value": 0.2
|
||||
},
|
||||
"speed_layer_0": {
|
||||
"default_value": 20
|
||||
},
|
||||
"speed_print_layer_0": {
|
||||
"default_value": 20
|
||||
},
|
||||
"cool_min_layer_time_fan_speed_max": {
|
||||
"default_value": 5
|
||||
},
|
||||
|
|
|
|||
|
|
@ -77,27 +77,12 @@
|
|||
"retraction_amount": {
|
||||
"default_value": 6
|
||||
},
|
||||
"retraction_min_travel": {
|
||||
"default_value": 1.5
|
||||
},
|
||||
"speed_travel": {
|
||||
"default_value": 150
|
||||
},
|
||||
"speed_print": {
|
||||
"default_value": 60
|
||||
},
|
||||
"wall_thickness": {
|
||||
"default_value": 1.2
|
||||
},
|
||||
"bottom_thickness": {
|
||||
"default_value": 0.2
|
||||
},
|
||||
"speed_layer_0": {
|
||||
"default_value": 20
|
||||
},
|
||||
"speed_print_layer_0": {
|
||||
"default_value": 20
|
||||
},
|
||||
"cool_min_layer_time_fan_speed_max": {
|
||||
"default_value": 5
|
||||
},
|
||||
|
|
|
|||
|
|
@ -53,57 +53,15 @@
|
|||
"layer_height_0": {
|
||||
"default_value": 0.2
|
||||
},
|
||||
"wall_line_count": {
|
||||
"default_value": 2
|
||||
},
|
||||
"top_layers": {
|
||||
"default_value": 4
|
||||
},
|
||||
"bottom_layers": {
|
||||
"default_value": 4
|
||||
},
|
||||
"speed_print": {
|
||||
"default_value": 50
|
||||
},
|
||||
"speed_wall": {
|
||||
"default_value": 30
|
||||
},
|
||||
"speed_wall_0": {
|
||||
"default_value": 30
|
||||
},
|
||||
"speed_wall_x": {
|
||||
"default_value": 30
|
||||
},
|
||||
"speed_topbottom": {
|
||||
"default_value": 50
|
||||
},
|
||||
"speed_support": {
|
||||
"default_value": 50
|
||||
},
|
||||
"speed_travel": {
|
||||
"default_value": 120
|
||||
},
|
||||
"speed_layer_0": {
|
||||
"default_value": 20
|
||||
},
|
||||
"skirt_brim_speed": {
|
||||
"default_value": 15
|
||||
},
|
||||
"speed_slowdown_layers": {
|
||||
"default_value": 4
|
||||
},
|
||||
"infill_sparse_density": {
|
||||
"default_value": 20
|
||||
},
|
||||
"cool_fan_speed_min": {
|
||||
"default_value": 50
|
||||
},
|
||||
"cool_fan_speed_max": {
|
||||
"default_value": 100
|
||||
},
|
||||
"cool_fan_full_layer": {
|
||||
"default_value": 4
|
||||
},
|
||||
"cool_min_layer_time": {
|
||||
"default_value": 5
|
||||
},
|
||||
|
|
@ -122,12 +80,6 @@
|
|||
"support_z_distance": {
|
||||
"default_value": 0.2
|
||||
},
|
||||
"support_top_distance": {
|
||||
"default_value": 0.2
|
||||
},
|
||||
"support_bottom_distance": {
|
||||
"default_value": 0.24
|
||||
},
|
||||
"support_pattern": {
|
||||
"default_value": "ZigZag"
|
||||
},
|
||||
|
|
@ -140,24 +92,6 @@
|
|||
"skirt_brim_minimal_length": {
|
||||
"default_value": 100
|
||||
},
|
||||
"raft_base_line_spacing": {
|
||||
"default_value": 2
|
||||
},
|
||||
"raft_base_thickness": {
|
||||
"default_value": 0.3
|
||||
},
|
||||
"raft_base_line_width": {
|
||||
"default_value": 2
|
||||
},
|
||||
"raft_base_speed": {
|
||||
"default_value": 15
|
||||
},
|
||||
"raft_interface_thickness": {
|
||||
"default_value": 0.24
|
||||
},
|
||||
"raft_interface_line_width": {
|
||||
"default_value": 0.6
|
||||
},
|
||||
"raft_airgap": {
|
||||
"default_value": 0.2
|
||||
},
|
||||
|
|
|
|||
|
|
@ -18,9 +18,7 @@
|
|||
"overrides": {
|
||||
"prime_tower_size": { "default_value": 10.0 },
|
||||
"infill_sparse_density": { "default_value": 10 },
|
||||
"speed_travel": { "default_value": 150 },
|
||||
"layer_height": { "default_value": 0.15 },
|
||||
"material_print_temperature": { "default_value": 220 },
|
||||
"machine_extruder_count": { "default_value": 1 },
|
||||
"machine_heated_bed": { "default_value": true },
|
||||
"machine_center_is_zero": { "default_value": false },
|
||||
|
|
|
|||
|
|
@ -1,5 +1,4 @@
|
|||
{
|
||||
"id": "malyan_m180",
|
||||
"version": 2,
|
||||
"name": "Malyan M180",
|
||||
"inherits": "fdmprinter",
|
||||
|
|
|
|||
|
|
@ -1,5 +1,4 @@
|
|||
{
|
||||
"id": "malyan_m200",
|
||||
"version": 2,
|
||||
"name": "Malyan M200",
|
||||
"inherits": "fdmprinter",
|
||||
|
|
@ -30,8 +29,6 @@
|
|||
"speed_wall_x": { "value": "speed_print" },
|
||||
"speed_support": { "value": "speed_wall_0" },
|
||||
"speed_layer_0": { "value": "round(speed_print / 2.0, 2)" },
|
||||
"speed_travel": { "default_value": 50 },
|
||||
"speed_travel_layer_0": { "default_value": 40 },
|
||||
"speed_infill": { "value": "speed_print" },
|
||||
"speed_topbottom": {"value": "speed_print / 2"},
|
||||
|
||||
|
|
|
|||
|
|
@ -41,23 +41,15 @@
|
|||
"layer_height": { "default_value": 0.2 },
|
||||
"wall_thickness": { "default_value": 0.8 },
|
||||
"top_bottom_thickness": { "default_value": 0.3 },
|
||||
"material_print_temperature": { "default_value": 195 },
|
||||
"material_bed_temperature": { "default_value": 60 },
|
||||
"retraction_enable": { "default_value": true },
|
||||
"retraction_speed": { "default_value": 50 },
|
||||
"retraction_amount": { "default_value": 0.8 },
|
||||
"retraction_hop": { "default_value": 0.075 },
|
||||
"speed_print": { "default_value": 60 },
|
||||
"speed_infill": { "default_value": 100 },
|
||||
"speed_topbottom": { "default_value": 15 },
|
||||
"speed_travel": { "default_value": 150 },
|
||||
"speed_layer_0": {
|
||||
"minimum_value": "0.1",
|
||||
"default_value": 15.0
|
||||
"minimum_value": "0.1"
|
||||
},
|
||||
"infill_overlap": { "default_value": 10 },
|
||||
"cool_fan_enabled": { "default_value": false },
|
||||
"cool_fan_speed": { "default_value": 0 },
|
||||
"skirt_line_count": { "default_value": 3 },
|
||||
"skirt_gap": { "default_value": 4 },
|
||||
"skirt_brim_minimal_length": { "default_value": 200 }
|
||||
|
|
|
|||
|
|
@ -1,5 +1,4 @@
|
|||
{
|
||||
"id": "monoprice_select_mini_v1",
|
||||
"version": 2,
|
||||
"name": "Monoprice Select Mini V1",
|
||||
"inherits": "malyan_m200",
|
||||
|
|
|
|||
|
|
@ -1,5 +1,4 @@
|
|||
{
|
||||
"id": "monoprice_select_mini_v2",
|
||||
"version": 2,
|
||||
"name": "Monoprice Select Mini V2 (E3D)",
|
||||
"inherits": "malyan_m200",
|
||||
|
|
|
|||
|
|
@ -34,7 +34,7 @@
|
|||
"machine_depth": {
|
||||
"default_value": 300
|
||||
},
|
||||
"machine_head_polygon": {
|
||||
"machine_head_with_fans_polygon": {
|
||||
"default_value": [
|
||||
[-30, 34],
|
||||
[-30, -32],
|
||||
|
|
|
|||
|
|
@ -32,7 +32,7 @@
|
|||
"machine_depth": {
|
||||
"default_value": 150
|
||||
},
|
||||
"machine_head_polygon": {
|
||||
"machine_head_with_fans_polygon": {
|
||||
"default_value": [
|
||||
[-30, 34],
|
||||
[-30, -32],
|
||||
|
|
|
|||
|
|
@ -19,12 +19,9 @@
|
|||
},
|
||||
|
||||
"overrides": {
|
||||
"material_bed_temperature": { "default_value": 60 },
|
||||
"prime_tower_size": { "default_value": 7.0710678118654755 },
|
||||
"infill_sparse_density": { "default_value": 15 },
|
||||
"speed_travel": { "default_value": 150 },
|
||||
"layer_height": { "default_value": 0.3 },
|
||||
"material_print_temperature": { "default_value": 240 },
|
||||
"machine_extruder_count": { "default_value": 5 },
|
||||
"machine_heated_bed": { "default_value": true },
|
||||
"machine_center_is_zero": { "default_value": false },
|
||||
|
|
|
|||
|
|
@ -29,7 +29,6 @@
|
|||
"machine_head_with_fans_polygon": { "default_value": [[-32,999],[37,999],[37,-32],[-32,-32]] },
|
||||
"gantry_height": { "value": "55" },
|
||||
"speed_print": { "default_value": 50 },
|
||||
"speed_travel": { "default_value": 55 },
|
||||
"machine_max_feedrate_x": {"default_value": 125},
|
||||
"machine_max_feedrate_y": {"default_value": 125},
|
||||
"machine_max_feedrate_z": { "default_value": 5 },
|
||||
|
|
|
|||
|
|
@ -31,14 +31,6 @@
|
|||
"machine_center_is_zero": {
|
||||
"default_value": false
|
||||
},
|
||||
"machine_head_polygon": {
|
||||
"default_value": [
|
||||
[-75, -18],
|
||||
[-75, 35],
|
||||
[18, 35],
|
||||
[18, -18]
|
||||
]
|
||||
},
|
||||
"machine_head_with_fans_polygon": {
|
||||
"default_value": [
|
||||
[-75, -18],
|
||||
|
|
|
|||
|
|
@ -22,13 +22,10 @@
|
|||
"machine_height": { "default_value": 200 },
|
||||
"machine_depth": { "default_value": 210 },
|
||||
"machine_center_is_zero": { "default_value": false },
|
||||
"material_bed_temperature": { "default_value": 55 },
|
||||
"layer_height": { "default_value": 0.1 },
|
||||
"layer_height_0": { "default_value": 0.15 },
|
||||
"retraction_amount": { "default_value": 0.8 },
|
||||
"retraction_speed": { "default_value": 35 },
|
||||
"retraction_retract_speed": { "default_value": 35 },
|
||||
"retraction_prime_speed": { "default_value": 35 },
|
||||
"adhesion_type": { "default_value": "skirt" },
|
||||
"machine_head_with_fans_polygon": { "default_value": [[-31,31],[34,31],[34,-40],[-31,-40]] },
|
||||
"gantry_height": { "value": "28" },
|
||||
|
|
|
|||
50
resources/definitions/prusa_i3_mk3.def.json
Normal file
50
resources/definitions/prusa_i3_mk3.def.json
Normal file
|
|
@ -0,0 +1,50 @@
|
|||
{
|
||||
"version": 2,
|
||||
"name": "Prusa i3 Mk3/Mk3s",
|
||||
"inherits": "fdmprinter",
|
||||
"metadata": {
|
||||
"visible": true,
|
||||
"author": "Prusa Research",
|
||||
"manufacturer": "Prusa3D",
|
||||
"file_formats": "text/x-gcode",
|
||||
"icon": "icon_ultimaker2",
|
||||
"platform": "Original_Prusa_i3_MK3S_MK3_platform.stl",
|
||||
"has_materials": true,
|
||||
"machine_extruder_trains":
|
||||
{
|
||||
"0": "prusa_i3_mk3_extruder_0"
|
||||
}
|
||||
},
|
||||
|
||||
"overrides": {
|
||||
"machine_name": { "default_value": "Prusa i3 Mk3/Mk3s" },
|
||||
"machine_heated_bed": { "default_value": true },
|
||||
"machine_width": { "default_value": 250 },
|
||||
"machine_height": { "default_value": 210 },
|
||||
"machine_depth": { "default_value": 210 },
|
||||
"machine_center_is_zero": { "default_value": false },
|
||||
"material_diameter": { "default_value": 1.75 },
|
||||
"machine_nozzle_size": { "default_value": 0.4 },
|
||||
"layer_height": { "default_value": 0.15 },
|
||||
"layer_height_0": { "default_value": 0.2 },
|
||||
"retraction_amount": { "default_value": 0.8 },
|
||||
"retraction_speed": { "default_value": 35 },
|
||||
"adhesion_type": { "default_value": "skirt" },
|
||||
"machine_head_with_fans_polygon": { "default_value": [[-31,31],[34,31],[34,-40],[-31,-40]] },
|
||||
"gantry_height": { "value": 28 },
|
||||
"machine_max_feedrate_z": { "default_value": 12 },
|
||||
"machine_max_feedrate_e": { "default_value": 120 },
|
||||
"machine_max_acceleration_z": { "default_value": 500 },
|
||||
"machine_acceleration": { "default_value": 1000 },
|
||||
"machine_max_jerk_xy": { "default_value": 10 },
|
||||
"machine_max_jerk_z": { "default_value": 0.2 },
|
||||
"machine_max_jerk_e": { "default_value": 2.5 },
|
||||
"machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
|
||||
"machine_start_gcode": {
|
||||
"default_value": "G21 ; set units to millimeters\nG90 ; use absolute positioning\nM82 ; absolute extrusion mode\nM104 S{material_print_temperature_layer_0} ; set extruder temp\nM140 S{material_bed_temperature_layer_0} ; set bed temp\nM190 S{material_bed_temperature_layer_0} ; wait for bed temp\nM109 S{material_print_temperature_layer_0} ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG92 E0.0 ; reset extruder distance position\nG1 Y-3.0 F1000.0 ; go outside print area\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E21.5 F1000.0 ; intro line\nG92 E0.0 ; reset extruder distance position"
|
||||
},
|
||||
"machine_end_gcode": {
|
||||
"default_value": "M104 S0 ; turn off extruder\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y210; home X axis and push Y forward\nM84 ; disable motors"
|
||||
}
|
||||
}
|
||||
}
|
||||
|
|
@ -31,7 +31,7 @@
|
|||
"machine_center_is_zero": {
|
||||
"default_value": false
|
||||
},
|
||||
"machine_head_polygon": {
|
||||
"machine_head_with_fans_polygon": {
|
||||
"default_value": [
|
||||
[-75, -18],
|
||||
[-75, 35],
|
||||
|
|
|
|||
|
|
@ -16,16 +16,10 @@
|
|||
},
|
||||
|
||||
"overrides": {
|
||||
"machine_head_polygon": { "default_value": [[ 0, 0], [ 0, 0], [ 0, 0], [ 0, 0]] },
|
||||
"speed_travel": { "default_value": 150 },
|
||||
"machine_head_with_fans_polygon": { "default_value": [[ 0, 0], [ 0, 0], [ 0, 0], [ 0, 0]] },
|
||||
"prime_tower_size": { "default_value": 8.660254037844387 },
|
||||
"speed_wall_x": { "default_value": 40 },
|
||||
"speed_wall_0": { "default_value": 40 },
|
||||
"speed_topbottom": { "default_value": 40 },
|
||||
"layer_height": { "default_value": 0.2 },
|
||||
"material_print_temperature": { "default_value": 195 },
|
||||
"speed_print": { "default_value": 40 },
|
||||
"speed_infill": { "default_value": 40 },
|
||||
"machine_extruder_count": { "default_value": 2 },
|
||||
"machine_heated_bed": { "default_value": true },
|
||||
"machine_center_is_zero": { "default_value": false },
|
||||
|
|
|
|||
|
|
@ -21,27 +21,17 @@
|
|||
"machine_end_gcode": {
|
||||
"default_value": " ; -- END GCODE --\n G1 X0 Y230 ; Get extruder out of way.\n M107 ; Turn off fan\n G91 ; Relative positioning\n G0 Z20 ; Lift extruder up\n T0\n G1 E-1 ; Reduce filament pressure\n M104 T0 S0 ; Turn ectruder heater off\n G90 ; Absolute positioning\n G92 E0 ; Reset extruder position\n M140 S0 ; Disable heated bed\n M84 ; Turn steppers off\n ; -- end of END GCODE --\n"
|
||||
},
|
||||
"machine_head_polygon": { "default_value": [[ 22, 67], [ 22, 51], [ 36, 51], [ 36, 67]] },
|
||||
"machine_head_with_fans_polygon": { "default_value": [[ 22, 67], [ 22, 51], [ 36, 51], [ 36, 67]] },
|
||||
"skirt_gap": { "default_value": 5.0 },
|
||||
"cool_min_layer_time": { "default_value": 10 },
|
||||
"prime_tower_size": { "default_value": 7.745966692414834 },
|
||||
"speed_wall_x": { "default_value": 40 },
|
||||
"speed_travel": { "default_value": 100 },
|
||||
"bottom_thickness": { "default_value": 0.75 },
|
||||
"layer_height_0": { "default_value": 0.25 },
|
||||
"support_angle": { "default_value": 45 },
|
||||
"material_bed_temperature": { "default_value": 100 },
|
||||
"top_thickness": { "default_value": 0.75 },
|
||||
"material_print_temperature": { "default_value": 235 },
|
||||
"retraction_speed": { "default_value": 60.0 },
|
||||
"wall_thickness": { "default_value": 0.8 },
|
||||
"retraction_min_travel": { "default_value": 2 },
|
||||
"speed_wall_0": { "default_value": 30 },
|
||||
"retraction_amount": { "default_value": 1 },
|
||||
"speed_topbottom": { "default_value": 30 },
|
||||
"layer_height": { "default_value": 0.25 },
|
||||
"speed_print": { "default_value": 40 },
|
||||
"speed_infill": { "default_value": 40 },
|
||||
"machine_extruder_count": { "default_value": 1 },
|
||||
"machine_heated_bed": { "default_value": true },
|
||||
"machine_center_is_zero": { "default_value": false },
|
||||
|
|
|
|||
|
|
@ -21,24 +21,16 @@
|
|||
"machine_end_gcode": {
|
||||
"default_value": " ; -- END GCODE --\n G1 X0 Y230 ; Get extruder out of way.\n M107 ; Turn off fan\n G91 ; Relative positioning\n G0 Z20 ; Lift extruder up\n T0\n G1 E-1 ; Reduce filament pressure\n M104 T0 S0 ; Turn extruder heater off\n G90 ; Absolute positioning\n G92 E0 ; Reset extruder position\n M140 S0 ; Disable heated bed\n M84 ; Turn steppers off\n ; -- end of END GCODE --\n"
|
||||
},
|
||||
"machine_head_polygon": { "default_value": [[ 18, 0], [ 18, 65], [ 32, 65], [ 32, 0]] },
|
||||
"machine_head_with_fans_polygon": { "default_value": [[ 18, 0], [ 18, 65], [ 32, 65], [ 32, 0]] },
|
||||
"cool_min_layer_time": { "default_value": 10 },
|
||||
"prime_tower_size": { "default_value": 7.745966692414834 },
|
||||
"skirt_gap": { "default_value": 5.0 },
|
||||
"speed_travel": { "default_value": 120 },
|
||||
"bottom_thickness": { "default_value": 0.75 },
|
||||
"layer_height_0": { "default_value": 0.25 },
|
||||
"support_angle": { "default_value": 45 },
|
||||
"material_bed_temperature": { "default_value": 100 },
|
||||
"retraction_min_travel": { "default_value": 2 },
|
||||
"speed_wall_0": { "default_value": 30 },
|
||||
"retraction_speed": { "default_value": 60.0 },
|
||||
"wall_thickness": { "default_value": 0.8 },
|
||||
"material_print_temperature": { "default_value": 235 },
|
||||
"retraction_amount": { "default_value": 1 },
|
||||
"speed_topbottom": { "default_value": 25 },
|
||||
"layer_height": { "default_value": 0.25 },
|
||||
"top_thickness": { "default_value": 0.75 },
|
||||
"machine_extruder_count": { "default_value": 1 },
|
||||
"machine_heated_bed": { "default_value": true },
|
||||
"machine_center_is_zero": { "default_value": false },
|
||||
|
|
|
|||
|
|
@ -15,27 +15,19 @@
|
|||
},
|
||||
|
||||
"overrides": {
|
||||
"machine_head_polygon": { "default_value": [[ 16, 30], [ 16, 45], [ 16, 45], [ 16, 30]] },
|
||||
"machine_head_with_fans_polygon": { "default_value": [[ 16, 30], [ 16, 45], [ 16, 45], [ 16, 30]] },
|
||||
"prime_tower_size": { "default_value": 8.660254037844387 },
|
||||
"speed_travel": { "default_value": 40 },
|
||||
"skirt_gap": { "default_value": 5.0 },
|
||||
"cool_min_layer_time": { "default_value": 15 },
|
||||
"support_pattern": { "default_value": "grid" },
|
||||
"layer_height_0": { "default_value": 0.25 },
|
||||
"speed_wall_x": { "default_value": 30 },
|
||||
"skirt_line_count": { "default_value": 2 },
|
||||
"support_angle": { "default_value": 45 },
|
||||
"speed_topbottom": { "default_value": 20 },
|
||||
"material_print_temperature": { "default_value": 205 },
|
||||
"retraction_speed": { "default_value": 80 },
|
||||
"wall_thickness": { "default_value": 0.8 },
|
||||
"retraction_min_travel": { "default_value": 2 },
|
||||
"speed_wall_0": { "default_value": 20 },
|
||||
"retraction_amount": { "default_value": 2 },
|
||||
"speed_layer_0": { "default_value": 15 },
|
||||
"layer_height": { "default_value": 0.2 },
|
||||
"speed_print": { "default_value": 30 },
|
||||
"speed_infill": { "default_value": 30 },
|
||||
"machine_extruder_count": { "default_value": 1 },
|
||||
"machine_heated_bed": { "default_value": false },
|
||||
"machine_center_is_zero": { "default_value": false },
|
||||
|
|
|
|||
|
|
@ -76,14 +76,9 @@
|
|||
"default_value": true
|
||||
},
|
||||
"cool_fan_speed": {
|
||||
"default_value": 100,
|
||||
"value": "100"
|
||||
},
|
||||
"cool_fan_speed_min": {
|
||||
"default_value": 0
|
||||
},
|
||||
"cool_fan_full_at_height": {
|
||||
"default_value": 0.5,
|
||||
"value": "0.5"
|
||||
},
|
||||
"support_z_distance": {
|
||||
|
|
|
|||
|
|
@ -21,24 +21,14 @@
|
|||
"machine_end_gcode": {
|
||||
"default_value": " ; -- END GCODE --\n G1 X0 Y230 ; Get extruder out of way.\n M107 ; Turn off fan\n G91 ; Relative positioning\n G0 Z20 ; Lift extruder up\n T0\n G1 E-1 ; Reduce filament pressure\n M104 T0 S0 ; Turn ectruder heater off\n G90 ; Absolute positioning\n G92 E0 ; Reset extruder position\n M140 S0 ; Disable heated bed\n M84 ; Turn steppers off\n ; -- end of END GCODE --\n"
|
||||
},
|
||||
"machine_head_polygon": { "default_value": [[ 40, 15], [ 40, 60], [ 30, 60], [ 30, 15]] },
|
||||
"machine_head_with_fans_polygon": { "default_value": [[ 40, 15], [ 40, 60], [ 30, 60], [ 30, 15]] },
|
||||
"support_pattern": { "default_value": "grid" },
|
||||
"cool_min_layer_time": { "default_value": 10 },
|
||||
"speed_travel": { "default_value": 80 },
|
||||
"support_angle": { "default_value": 45 },
|
||||
"retraction_min_travel": { "default_value": 2 },
|
||||
"speed_wall_0": { "default_value": 20 },
|
||||
"speed_layer_0": { "default_value": 15 },
|
||||
"speed_infill": { "default_value": 30 },
|
||||
"speed_topbottom": { "default_value": 30 },
|
||||
"prime_tower_size": { "default_value": 7.745966692414834 },
|
||||
"skirt_line_count": { "default_value": 2 },
|
||||
"speed_wall_x": { "default_value": 30 },
|
||||
"bottom_thickness": { "default_value": 0.75 },
|
||||
"layer_height_0": { "default_value": 0.25 },
|
||||
"top_thickness": { "default_value": 0.75 },
|
||||
"wall_thickness": { "default_value": 0.8 },
|
||||
"material_print_temperature": { "default_value": 195 },
|
||||
"retraction_amount": { "default_value": 1.5 },
|
||||
"skirt_gap": { "default_value": 5.0 },
|
||||
"layer_height": { "default_value": 0.25 },
|
||||
|
|
|
|||
|
|
@ -44,9 +44,6 @@
|
|||
"material_print_temperature": {
|
||||
"value": 235
|
||||
},
|
||||
"material_bed_temperature": {
|
||||
"default_value": 100
|
||||
},
|
||||
"speed_print": {
|
||||
"default_value": 40
|
||||
},
|
||||
|
|
@ -55,7 +52,7 @@
|
|||
},
|
||||
"speed_travel": {
|
||||
"value": 100
|
||||
},
|
||||
},
|
||||
"support_enable": {
|
||||
"default_value": false
|
||||
},
|
||||
|
|
@ -90,14 +87,9 @@
|
|||
"default_value": false
|
||||
},
|
||||
"cool_fan_speed": {
|
||||
"default_value": 50,
|
||||
"value": 50
|
||||
},
|
||||
"cool_fan_speed_min": {
|
||||
"default_value": 0
|
||||
},
|
||||
"cool_fan_full_at_height": {
|
||||
"default_value": 1.0,
|
||||
"value": 1.0
|
||||
},
|
||||
"support_z_distance": {
|
||||
|
|
|
|||
|
|
@ -49,37 +49,15 @@
|
|||
"top_bottom_thickness": {
|
||||
"default_value": 0.3
|
||||
},
|
||||
"material_print_temperature": {
|
||||
"default_value": 195
|
||||
},
|
||||
"material_bed_temperature": {
|
||||
"default_value": 60
|
||||
},
|
||||
"speed_print": {
|
||||
"default_value": 60
|
||||
},
|
||||
"speed_infill": {
|
||||
"default_value": 100
|
||||
},
|
||||
"speed_topbottom": {
|
||||
"default_value": 15
|
||||
},
|
||||
"speed_travel": {
|
||||
"default_value": 150
|
||||
},
|
||||
"speed_layer_0": {
|
||||
"default_value": 15,
|
||||
"minimum_value": "0.1"
|
||||
},
|
||||
"infill_overlap": {
|
||||
"default_value": 10
|
||||
},
|
||||
"cool_fan_enabled": {
|
||||
"default_value": false
|
||||
},
|
||||
"cool_fan_speed": {
|
||||
"default_value": 0
|
||||
},
|
||||
"skirt_line_count": {
|
||||
"default_value": 3
|
||||
},
|
||||
|
|
|
|||
|
|
@ -49,37 +49,15 @@
|
|||
"top_bottom_thickness": {
|
||||
"default_value": 0.3
|
||||
},
|
||||
"material_print_temperature": {
|
||||
"default_value": 195
|
||||
},
|
||||
"material_bed_temperature": {
|
||||
"default_value": 60
|
||||
},
|
||||
"speed_print": {
|
||||
"default_value": 60
|
||||
},
|
||||
"speed_infill": {
|
||||
"default_value": 100
|
||||
},
|
||||
"speed_topbottom": {
|
||||
"default_value": 15
|
||||
},
|
||||
"speed_travel": {
|
||||
"default_value": 150
|
||||
},
|
||||
"speed_layer_0": {
|
||||
"default_value": 15,
|
||||
"minimum_value": "0.1"
|
||||
},
|
||||
"infill_overlap": {
|
||||
"default_value": 10
|
||||
},
|
||||
"cool_fan_enabled": {
|
||||
"default_value": false
|
||||
},
|
||||
"cool_fan_speed": {
|
||||
"default_value": 0
|
||||
},
|
||||
"skirt_line_count": {
|
||||
"default_value": 3
|
||||
},
|
||||
|
|
|
|||
|
|
@ -22,28 +22,16 @@
|
|||
"default_value": " M104 S0 ;extruder heater off\n M140 S0 ;heated bed heater off (if you have it)\n G91 ;relative positioning\n G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\n G1 Z+0.5 E-5 X-20 Y-20 F{speed_travel} ;move Z up a bit and retract filament even more\n G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\n M84 ;steppers off\n G90 ;absolute positioning\n"
|
||||
},
|
||||
"cool_min_layer_time": { "default_value": 7 },
|
||||
"speed_topbottom": { "default_value": 40 },
|
||||
"retraction_speed": { "default_value": 50 },
|
||||
"layer_0_z_overlap": { "default_value": 0.2 },
|
||||
"cool_min_speed": { "default_value": 19 },
|
||||
"material_bed_temperature": { "default_value": 60 },
|
||||
"support_angle": { "default_value": 50 },
|
||||
"speed_layer_0": { "default_value": 30 },
|
||||
"line_width": { "default_value": 0.4 },
|
||||
"speed_infill": { "default_value": 60 },
|
||||
"prime_tower_size": { "default_value": 8.660254037844387 },
|
||||
"support_enable": { "default_value": true },
|
||||
"cool_fan_full_at_height": { "default_value": 0.1 },
|
||||
"bottom_thickness": { "default_value": 1.2 },
|
||||
"raft_airgap": { "default_value": 0.2 },
|
||||
"layer_height_0": { "default_value": 0.15 },
|
||||
"top_thickness": { "default_value": 1.2 },
|
||||
"speed_wall_0": { "default_value": 40 },
|
||||
"retraction_min_travel": { "default_value": 5 },
|
||||
"material_flow": { "default_value": 100 },
|
||||
"infill_sparse_density": { "default_value": 10 },
|
||||
"wall_thickness": { "default_value": 1.2 },
|
||||
"material_print_temperature": { "default_value": 190 },
|
||||
"retraction_amount": { "default_value": 3 },
|
||||
"layer_height": { "default_value": 0.2 },
|
||||
"speed_print": { "default_value": 40 },
|
||||
|
|
|
|||
|
|
@ -27,13 +27,11 @@
|
|||
"machine_name": { "default_value": "Artemis" },
|
||||
"machine_shape": { "default_value": "elliptic" },
|
||||
"machine_width": { "default_value": 290 },
|
||||
"relative_extrusion": { "default_value": false },
|
||||
"relative_extrusion": { "value": "False" },
|
||||
"retraction_amount": { "default_value": 3.2 },
|
||||
"retraction_combing": { "default_value": "off" },
|
||||
"retraction_hop_enabled": { "default_value": true },
|
||||
"retraction_hop_only_when_collides": { "default_value": false },
|
||||
"retraction_prime_speed": { "default_value": 45 },
|
||||
"retraction_retract_speed": { "default_value": 45 },
|
||||
"retraction_speed": { "default_value": 45 },
|
||||
"machine_start_gcode": {
|
||||
"default_value": "G28\nG1 Z15.0 F10000\nG92 E0"
|
||||
|
|
|
|||
|
|
@ -27,13 +27,11 @@
|
|||
"machine_name": { "default_value": "Rostock Max V3.2" },
|
||||
"machine_shape": { "default_value": "elliptic" },
|
||||
"machine_width": { "default_value": 265 },
|
||||
"relative_extrusion": { "default_value": false },
|
||||
"relative_extrusion": { "value": "False" },
|
||||
"retraction_amount": { "default_value": 3.2 },
|
||||
"retraction_combing": { "default_value": "off" },
|
||||
"retraction_hop_enabled": { "default_value": true },
|
||||
"retraction_hop_only_when_collides": { "default_value": false },
|
||||
"retraction_prime_speed": { "default_value": 45 },
|
||||
"retraction_retract_speed": { "default_value": 45 },
|
||||
"retraction_speed": { "default_value": 45 },
|
||||
"machine_start_gcode": {
|
||||
"default_value": "G28\nG1 Z15.0 F10000\nG92 E0"
|
||||
|
|
|
|||
598
resources/definitions/skriware_2.def.json
Normal file
598
resources/definitions/skriware_2.def.json
Normal file
|
|
@ -0,0 +1,598 @@
|
|||
{
|
||||
"name": "Skriware 2",
|
||||
"version": 2,
|
||||
"inherits": "fdmprinter",
|
||||
"metadata": {
|
||||
"visible": true,
|
||||
"author": "Skriware",
|
||||
"manufacturer": "Skriware",
|
||||
"category": "Other",
|
||||
"file_formats": "text/x-gcode",
|
||||
"platform_offset": [
|
||||
0,
|
||||
0,
|
||||
0
|
||||
],
|
||||
"supports_usb_connection": false,
|
||||
"platform": "skriware_2_platform.stl",
|
||||
"machine_extruder_trains": {
|
||||
"0": "skriware_2_extruder_0",
|
||||
"1": "skriware_2_extruder_1"
|
||||
}
|
||||
},
|
||||
"overrides": {
|
||||
"jerk_print_layer_0": {
|
||||
"value": "5"
|
||||
},
|
||||
"jerk_prime_tower": {
|
||||
"value": "5"
|
||||
},
|
||||
"expand_skins_expand_distance": {
|
||||
"value": "1.2"
|
||||
},
|
||||
"jerk_support_interface": {
|
||||
"value": "5"
|
||||
},
|
||||
"jerk_travel_layer_0": {
|
||||
"value": "5.0"
|
||||
},
|
||||
"wipe_retraction_prime_speed": {
|
||||
"value": "30"
|
||||
},
|
||||
"material_standby_temperature": {
|
||||
"default_value": 195
|
||||
},
|
||||
"acceleration_support_bottom": {
|
||||
"value": "250"
|
||||
},
|
||||
"raft_base_line_width": {
|
||||
"value": "0.5"
|
||||
},
|
||||
"raft_speed": {
|
||||
"value": "30.0"
|
||||
},
|
||||
"jerk_topbottom": {
|
||||
"value": "5"
|
||||
},
|
||||
"ironing_inset": {
|
||||
"value": "0.2"
|
||||
},
|
||||
"acceleration_wall": {
|
||||
"value": "250"
|
||||
},
|
||||
"cross_infill_pocket_size": {
|
||||
"value": "5.333333333333333"
|
||||
},
|
||||
"jerk_support_roof": {
|
||||
"value": "5"
|
||||
},
|
||||
"acceleration_print": {
|
||||
"default_value": 250
|
||||
},
|
||||
"meshfix_maximum_travel_resolution": {
|
||||
"value": "0.8"
|
||||
},
|
||||
"support_top_distance": {
|
||||
"value": "0.22"
|
||||
},
|
||||
"acceleration_enabled": {
|
||||
"default_value": true
|
||||
},
|
||||
"optimize_wall_printing_order": {
|
||||
"default_value": true
|
||||
},
|
||||
"jerk_layer_0": {
|
||||
"value": "5"
|
||||
},
|
||||
"infill_line_distance": {
|
||||
"value": "5.333333333333333"
|
||||
},
|
||||
"acceleration_ironing": {
|
||||
"value": "250"
|
||||
},
|
||||
"material_print_temperature_layer_0": {
|
||||
"value": "195"
|
||||
},
|
||||
"bridge_skin_speed_2": {
|
||||
"value": "15"
|
||||
},
|
||||
"acceleration_travel": {
|
||||
"value": "250"
|
||||
},
|
||||
"switch_extruder_retraction_speed": {
|
||||
"value": "30"
|
||||
},
|
||||
"jerk_print": {
|
||||
"default_value": 5
|
||||
},
|
||||
"material_guid": {
|
||||
"default_value": "0ff92885-617b-4144-a03c-9989872454bc"
|
||||
},
|
||||
"raft_interface_acceleration": {
|
||||
"value": "250"
|
||||
},
|
||||
"acceleration_support_interface": {
|
||||
"value": "250"
|
||||
},
|
||||
"cool_fan_full_layer": {
|
||||
"value": "1"
|
||||
},
|
||||
"skirt_brim_minimal_length": {
|
||||
"default_value": 50
|
||||
},
|
||||
"material_bed_temperature": {
|
||||
"value": "50"
|
||||
},
|
||||
"speed_slowdown_layers": {
|
||||
"default_value": 1
|
||||
},
|
||||
"speed_travel": {
|
||||
"value": "150"
|
||||
},
|
||||
"skin_overlap": {
|
||||
"value": "15"
|
||||
},
|
||||
"acceleration_infill": {
|
||||
"value": "250"
|
||||
},
|
||||
"support_roof_material_flow": {
|
||||
"value": "99"
|
||||
},
|
||||
"raft_base_jerk": {
|
||||
"value": "5"
|
||||
},
|
||||
"retraction_retract_speed": {
|
||||
"value": "30"
|
||||
},
|
||||
"infill_wipe_dist": {
|
||||
"value": "0.1"
|
||||
},
|
||||
"jerk_wall_x": {
|
||||
"value": "5"
|
||||
},
|
||||
"layer_height": {
|
||||
"default_value": 0.2
|
||||
},
|
||||
"bottom_skin_expand_distance": {
|
||||
"value": "1.2000000000000002"
|
||||
},
|
||||
"machine_start_gcode": {
|
||||
"default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nG28 X0 Y0;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nM420 S1 Z0.9 ;enable bed levelling\nG1 Z10 F250 ;move the platform down 10mm\nM107 ;fan off\nM42 P11 S255 ;turn on front fan\nM140 S{material_bed_temperature}\nM104 T0 S{material_print_temperature}\nM104 T1 S{material_print_temperature}\nG1 F2500 Y260\nM190 S{material_bed_temperature}\nM109 T0 S{material_print_temperature}\nM109 T1 S{material_print_temperature}\nM60 ;enable E-FADE Algorithm\nM62 A ;filament sensor off\nG92 E0 ;zero the extruded length\nT1\nG92 E0;zero the extruded length\nG1 F300 Z0.3\nG1 F1200 X20\nG1 F1200 X180 E21 ;extrude 21 mm of feed stock\nG1 F1200 E15 ;retracting 6 mm\nG1 F2000 E21\nG1 F2000 E15\nG1 F300 Z1.5\nG92 E0 ;zero the extruded length again\nT0\nG92 E0 ;zero the extruded length\nG1 F1200 Y258\nG1 F300 Z0.3\nG1 F1200 X40 E21 ;extrude 21 mm of feed stock\nG1 F1200 E15 ;retracting 6 mm\nG1 F2000 E21\nG1 F2000 E15\nG1 Z1.5\nM61 A\nM63 A ;filament sensor on\nG92 E0 ;zero the extruded length again\nM58 ;end of Start G-Code and signal retract management"
|
||||
},
|
||||
"travel_retract_before_outer_wall": {
|
||||
"default_value": true
|
||||
},
|
||||
"xy_offset_layer_0": {
|
||||
"value": "-0.16"
|
||||
},
|
||||
"adhesion_type": {
|
||||
"default_value": "raft"
|
||||
},
|
||||
"min_skin_width_for_expansion": {
|
||||
"value": "0.671279704941824"
|
||||
},
|
||||
"support_bottom_material_flow": {
|
||||
"value": "99"
|
||||
},
|
||||
"prime_tower_position_x": {
|
||||
"value": "1"
|
||||
},
|
||||
"machine_depth": {
|
||||
"default_value": 260
|
||||
},
|
||||
"retraction_speed": {
|
||||
"default_value": 30
|
||||
},
|
||||
"support_skip_some_zags": {
|
||||
"default_value": true
|
||||
},
|
||||
"remove_empty_first_layers": {
|
||||
"default_value": false
|
||||
},
|
||||
"z_seam_x": {
|
||||
"value": "115"
|
||||
},
|
||||
"support_xy_distance_overhang": {
|
||||
"value": "0.5"
|
||||
},
|
||||
"support_tree_wall_thickness": {
|
||||
"value": "0.4"
|
||||
},
|
||||
"acceleration_print_layer_0": {
|
||||
"value": "250"
|
||||
},
|
||||
"support_xy_distance": {
|
||||
"default_value": 0.8
|
||||
},
|
||||
"support_roof_line_distance": {
|
||||
"value": "0.5714285714285714"
|
||||
},
|
||||
"jerk_enabled": {
|
||||
"default_value": true
|
||||
},
|
||||
"min_infill_area": {
|
||||
"default_value": 1
|
||||
},
|
||||
"travel_avoid_supports": {
|
||||
"default_value": true
|
||||
},
|
||||
"bottom_layers": {
|
||||
"value": "3"
|
||||
},
|
||||
"multiple_mesh_overlap": {
|
||||
"default_value": 0
|
||||
},
|
||||
"retraction_hop_enabled": {
|
||||
"default_value": true
|
||||
},
|
||||
"acceleration_topbottom": {
|
||||
"value": "250"
|
||||
},
|
||||
"jerk_wall": {
|
||||
"value": "5"
|
||||
},
|
||||
"jerk_wall_0": {
|
||||
"value": "5"
|
||||
},
|
||||
"skin_overlap_mm": {
|
||||
"value": "0.06"
|
||||
},
|
||||
"retraction_min_travel": {
|
||||
"value": "1"
|
||||
},
|
||||
"support_interface_material_flow": {
|
||||
"value": "99"
|
||||
},
|
||||
"material_diameter": {
|
||||
"default_value": 1.75
|
||||
},
|
||||
"speed_roofing": {
|
||||
"value": "30.0"
|
||||
},
|
||||
"skin_outline_count": {
|
||||
"default_value": 0
|
||||
},
|
||||
"skin_no_small_gaps_heuristic": {
|
||||
"default_value": true
|
||||
},
|
||||
"top_bottom_pattern_0": {
|
||||
"value": "'zigzag'"
|
||||
},
|
||||
"top_skin_expand_distance": {
|
||||
"value": "1.2000000000000002"
|
||||
},
|
||||
"acceleration_travel_layer_0": {
|
||||
"value": "250.0"
|
||||
},
|
||||
"prime_tower_min_volume": {
|
||||
"default_value": 4
|
||||
},
|
||||
"switch_extruder_retraction_speeds": {
|
||||
"default_value": 30
|
||||
},
|
||||
"skin_preshrink": {
|
||||
"value": "1.2000000000000002"
|
||||
},
|
||||
"material_bed_temperature_layer_0": {
|
||||
"value": "50"
|
||||
},
|
||||
"support_tree_collision_resolution": {
|
||||
"value": "0.2"
|
||||
},
|
||||
"machine_height": {
|
||||
"default_value": 210
|
||||
},
|
||||
"raft_acceleration": {
|
||||
"value": "250"
|
||||
},
|
||||
"fill_outline_gaps": {
|
||||
"default_value": true
|
||||
},
|
||||
"wall_x_material_flow": {
|
||||
"value": "99"
|
||||
},
|
||||
"jerk_support_bottom": {
|
||||
"value": "5"
|
||||
},
|
||||
"machine_end_gcode": {
|
||||
"default_value": "M59\nG92 E1\nG1 E-1 F300\nM104 T0 S0\nM104 T1 S0\nM140 S0\nG28 X0 Y0\nM84\nM106 S0\nM107"
|
||||
},
|
||||
"infill_sparse_density": {
|
||||
"default_value": 15
|
||||
},
|
||||
"meshfix_maximum_deviation": {
|
||||
"default_value": 0.005
|
||||
},
|
||||
"wall_0_material_flow": {
|
||||
"value": "99"
|
||||
},
|
||||
"material_adhesion_tendency": {
|
||||
"default_value": 0
|
||||
},
|
||||
"prime_tower_flow": {
|
||||
"value": "99"
|
||||
},
|
||||
"prime_tower_position_y": {
|
||||
"value": "1"
|
||||
},
|
||||
"support_material_flow": {
|
||||
"value": "99"
|
||||
},
|
||||
"retract_at_layer_change": {
|
||||
"default_value": true
|
||||
},
|
||||
"machine_extruder_count": {
|
||||
"default_value": 2
|
||||
},
|
||||
"wall_thickness": {
|
||||
"default_value": 1.2
|
||||
},
|
||||
"support_infill_sparse_thickness": {
|
||||
"value": "0.2"
|
||||
},
|
||||
"raft_surface_acceleration": {
|
||||
"value": "250"
|
||||
},
|
||||
"roofing_layer_count": {
|
||||
"value": "1"
|
||||
},
|
||||
"skirt_brim_line_width": {
|
||||
"value": "0.5"
|
||||
},
|
||||
"jerk_support": {
|
||||
"value": "5"
|
||||
},
|
||||
"raft_surface_jerk": {
|
||||
"value": "5"
|
||||
},
|
||||
"speed_equalize_flow_max": {
|
||||
"default_value": 40
|
||||
},
|
||||
"raft_surface_speed": {
|
||||
"value": "30.0"
|
||||
},
|
||||
"jerk_travel": {
|
||||
"value": "5"
|
||||
},
|
||||
"support_zag_skip_count": {
|
||||
"value": "8"
|
||||
},
|
||||
"retraction_combing": {
|
||||
"default_value": "infill"
|
||||
},
|
||||
"raft_interface_line_spacing": {
|
||||
"value": "0.4"
|
||||
},
|
||||
"layer_height_0": {
|
||||
"default_value": 0.2
|
||||
},
|
||||
"extruders_enabled_count": {
|
||||
"value": "2"
|
||||
},
|
||||
"support_line_distance": {
|
||||
"value": "1.3333333333333333"
|
||||
},
|
||||
"support_roof_density": {
|
||||
"value": "70"
|
||||
},
|
||||
"raft_base_line_spacing": {
|
||||
"value": "0.8"
|
||||
},
|
||||
"acceleration_prime_tower": {
|
||||
"value": "250"
|
||||
},
|
||||
"skin_material_flow": {
|
||||
"value": "99"
|
||||
},
|
||||
"support_z_distance": {
|
||||
"default_value": 0.22
|
||||
},
|
||||
"bottom_skin_preshrink": {
|
||||
"value": "1.2000000000000002"
|
||||
},
|
||||
"jerk_skirt_brim": {
|
||||
"value": "5"
|
||||
},
|
||||
"z_seam_y": {
|
||||
"value": "180"
|
||||
},
|
||||
"skirt_line_count": {
|
||||
"default_value": 2
|
||||
},
|
||||
"raft_margin": {
|
||||
"default_value": 4
|
||||
},
|
||||
"infill_material_flow": {
|
||||
"value": "99"
|
||||
},
|
||||
"wipe_retraction_retract_speed": {
|
||||
"value": "30"
|
||||
},
|
||||
"z_seam_corner": {
|
||||
"default_value": "z_seam_corner_weighted"
|
||||
},
|
||||
"support_roof_height": {
|
||||
"value": "0.4"
|
||||
},
|
||||
"top_layers": {
|
||||
"value": "4"
|
||||
},
|
||||
"support_infill_rate": {
|
||||
"value": "30"
|
||||
},
|
||||
"raft_interface_speed": {
|
||||
"value": "35"
|
||||
},
|
||||
"default_material_print_temperature": {
|
||||
"default_value": 195
|
||||
},
|
||||
"acceleration_layer_0": {
|
||||
"value": "250"
|
||||
},
|
||||
"support_skip_zag_per_mm": {
|
||||
"default_value": 10
|
||||
},
|
||||
"material_initial_print_temperature": {
|
||||
"value": "195"
|
||||
},
|
||||
"raft_interface_jerk": {
|
||||
"value": "5"
|
||||
},
|
||||
"machine_width": {
|
||||
"default_value": 210
|
||||
},
|
||||
"wall_line_count": {
|
||||
"value": "3"
|
||||
},
|
||||
"retraction_amount": {
|
||||
"default_value": 3
|
||||
},
|
||||
"infill_sparse_thickness": {
|
||||
"value": "0.2"
|
||||
},
|
||||
"support_initial_layer_line_distance": {
|
||||
"value": "1.3333333333333333"
|
||||
},
|
||||
"jerk_support_infill": {
|
||||
"value": "5"
|
||||
},
|
||||
"acceleration_roofing": {
|
||||
"value": "250"
|
||||
},
|
||||
"retraction_extrusion_window": {
|
||||
"value": "3"
|
||||
},
|
||||
"raft_interface_line_width": {
|
||||
"value": "0.4"
|
||||
},
|
||||
"acceleration_support_roof": {
|
||||
"value": "250"
|
||||
},
|
||||
"support_brim_line_count": {
|
||||
"value": "16"
|
||||
},
|
||||
"layer_0_z_overlap": {
|
||||
"value": "0.1"
|
||||
},
|
||||
"support_angle": {
|
||||
"default_value": 60
|
||||
},
|
||||
"machine_heated_bed": {
|
||||
"default_value": true
|
||||
},
|
||||
"raft_surface_thickness": {
|
||||
"value": "0.2"
|
||||
},
|
||||
"cool_min_layer_time": {
|
||||
"default_value": 10
|
||||
},
|
||||
"gantry_height": {
|
||||
"value": "210"
|
||||
},
|
||||
"raft_airgap": {
|
||||
"default_value": 0.2
|
||||
},
|
||||
"acceleration_skirt_brim": {
|
||||
"value": "250"
|
||||
},
|
||||
"skirt_brim_material_flow": {
|
||||
"value": "99"
|
||||
},
|
||||
"jerk_infill": {
|
||||
"value": "5"
|
||||
},
|
||||
"roofing_material_flow": {
|
||||
"value": "99"
|
||||
},
|
||||
"support_use_towers": {
|
||||
"default_value": false
|
||||
},
|
||||
"ooze_shield_angle": {
|
||||
"default_value": 50
|
||||
},
|
||||
"material_flow": {
|
||||
"default_value": 99
|
||||
},
|
||||
"speed_travel_layer_0": {
|
||||
"value": "75.0"
|
||||
},
|
||||
"raft_base_acceleration": {
|
||||
"value": "250"
|
||||
},
|
||||
"retraction_count_max": {
|
||||
"default_value": 40
|
||||
},
|
||||
"ooze_shield_dist": {
|
||||
"default_value": 4
|
||||
},
|
||||
"acceleration_support": {
|
||||
"value": "250"
|
||||
},
|
||||
"max_skin_angle_for_expansion": {
|
||||
"default_value": 50
|
||||
},
|
||||
"coasting_enable": {
|
||||
"default_value": true
|
||||
},
|
||||
"brim_width": {
|
||||
"default_value": 10
|
||||
},
|
||||
"acceleration_support_infill": {
|
||||
"value": "250"
|
||||
},
|
||||
"retraction_prime_speed": {
|
||||
"value": "30"
|
||||
},
|
||||
"raft_base_speed": {
|
||||
"value": "35"
|
||||
},
|
||||
"acceleration_wall_0": {
|
||||
"value": "250"
|
||||
},
|
||||
"xy_offset": {
|
||||
"default_value": -0.16
|
||||
},
|
||||
"prime_tower_size": {
|
||||
"default_value": 1
|
||||
},
|
||||
"jerk_ironing": {
|
||||
"value": "5"
|
||||
},
|
||||
"switch_extruder_prime_speed": {
|
||||
"value": "30"
|
||||
},
|
||||
"raft_jerk": {
|
||||
"value": "5"
|
||||
},
|
||||
"top_skin_preshrink": {
|
||||
"value": "1.2000000000000002"
|
||||
},
|
||||
"material_print_temperature": {
|
||||
"value": "195"
|
||||
},
|
||||
"wall_material_flow": {
|
||||
"value": "99"
|
||||
},
|
||||
"jerk_roofing": {
|
||||
"value": "5"
|
||||
},
|
||||
"cool_fan_full_at_height": {
|
||||
"value": "0"
|
||||
},
|
||||
"acceleration_wall_x": {
|
||||
"value": "250"
|
||||
},
|
||||
"support_bottom_distance": {
|
||||
"value": "0.23"
|
||||
},
|
||||
"cool_min_speed": {
|
||||
"default_value": 15
|
||||
},
|
||||
"default_material_bed_temperature": {
|
||||
"default_value": 50
|
||||
},
|
||||
"raft_interface_thickness": {
|
||||
"value": "0.2"
|
||||
}
|
||||
}
|
||||
}
|
||||
Some files were not shown because too many files have changed in this diff Show more
Loading…
Add table
Add a link
Reference in a new issue