add 3d printer profile for Anycubic Kobra and Anycubic Kobra Max

resources/quality/anycubic_kobra/anycubic_kobra_abs.inst.cfg

@@ -0,0 +1,46 @@
+[general]
+version = 4
+name = Suggested parameters for ABS_V1.0
+definition = anycubic_kobra
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = abs
+weight = 0
+global_quality = True
+
+[values]
+layer_height = 0.2
+acceleration_enabled = True
+default_material_bed_temperature = 80
+jerk_enabled = True
+layer_height_0 = 0.2
+acceleration_print = 800
+acceleration_travel = 3000
+acceleration_travel_layer_0 = 3000.0
+bottom_layers = 6
+brim_width = 7.0
+default_material_print_temperature = 230
+infill_overlap = 15
+infill_sparse_density = 20
+initial_layer_line_width_factor = 140
+jerk_print = 8
+jerk_travel = 10
+material_final_print_temperature = 230
+material_flow = 100
+material_flow_layer_0 = 120
+material_initial_print_temperature = 230
+optimize_wall_printing_order = True
+outer_inset_first = True
+retraction_amount = 6
+retraction_min_travel = =line_width * 2
+retraction_speed = 40
+skirt_brim_speed = 40
+speed_print = 50
+speed_travel = 100
+top_bottom_thickness = 1.2
+wall_thickness = 1.2
+z_seam_type = sharpest_corner
+z_seam_x = 110
+z_seam_y = 220

resources/quality/anycubic_kobra/anycubic_kobra_pla.inst.cfg

@@ -0,0 +1,41 @@
+[general]
+version = 4
+name = Suggested parameters for PLA_V1.0
+definition = anycubic_kobra
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = pla
+weight = -2
+global_quality = True
+
+[values]
+layer_height = 0.2
+acceleration_enabled = True
+jerk_enabled = True
+layer_height_0 = 0.2
+acceleration_print = 1000
+acceleration_travel_layer_0 = 2000.0
+bottom_layers = 6
+brim_width = 4.0
+infill_overlap = 15
+infill_sparse_density = 15
+initial_layer_line_width_factor = 100
+jerk_print = 8
+jerk_travel = 10
+material_final_print_temperature = 200
+material_initial_print_temperature = 200
+optimize_wall_printing_order = True
+outer_inset_first = True
+retraction_amount = 6
+retraction_min_travel = 1.5
+retraction_speed = 40
+skirt_brim_speed = 40
+speed_print = 50
+speed_travel = 100
+top_bottom_thickness = 1.2
+wall_thickness = 1.2
+z_seam_type = sharpest_corner
+z_seam_x = 110
+z_seam_y = 220

resources/quality/anycubic_kobra/anycubic_kobra_tpu.inst.cfg

@@ -0,0 +1,45 @@
+[general]
+version = 4
+name = Suggested parameters for TPU_V1.0
+definition = anycubic_kobra
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = tpu
+weight = 1
+global_quality = True
+
+[values]
+layer_height = 0.2
+acceleration_enabled = True
+jerk_enabled = True
+layer_height_0 = 0.2
+acceleration_print = 800
+acceleration_travel = 3000
+acceleration_travel_layer_0 = 3000.0
+bottom_layers = 6
+brim_width = 7.0
+default_material_print_temperature = 190
+infill_overlap = 15
+infill_sparse_density = 25
+initial_layer_line_width_factor = 140
+jerk_print = 8
+jerk_travel = 10
+material_final_print_temperature = 190
+material_flow = 90
+material_flow_layer_0 = 120
+material_initial_print_temperature = 190
+optimize_wall_printing_order = True
+outer_inset_first = True
+retraction_amount = 8
+retraction_min_travel = =line_width * 2
+retraction_speed = 60
+skirt_brim_speed = 40
+speed_print = 50
+speed_travel = 100
+top_bottom_thickness = 1.2
+wall_thickness = 1.2
+z_seam_type = sharpest_corner
+z_seam_x = 110
+z_seam_y = 220

resources/quality/anycubic_kobra_max/anycubic_kobra_max_pla.inst.cfg

@@ -0,0 +1,53 @@
+[general]
+version = 4
+name = Suggested parameters for PLA_V1.0
+definition = anycubic_kobra_max
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = pla
+weight = -2
+global_quality = True
+
+[values]
+layer_height = 0.2
+acceleration_enabled = True
+jerk_enabled = True
+layer_height_0 = 0.2
+acceleration_print = 1000
+acceleration_travel = 3000
+brim_width = 7
+default_material_print_temperature = 195
+infill_sparse_density = 15
+initial_layer_line_width_factor = 140
+jerk_print = 8
+jerk_travel = 10
+material_final_print_temperature = 195
+material_flow = 95
+material_flow_layer_0 = 120
+material_initial_print_temperature = 195
+material_print_temperature_layer_0 = 0
+optimize_wall_printing_order = True
+retraction_amount = 6
+retraction_hop = 0.075
+retraction_hop_enabled = True
+retraction_hop_only_when_collides = True
+retraction_min_travel = 1.5
+retraction_speed = 40
+skirt_brim_speed = 40
+speed_layer_0 = 45
+speed_print = 80
+speed_topbottom = 45
+speed_travel = 100
+speed_travel_layer_0 = 100
+speed_wall = 80
+speed_wall_0 = 45
+speed_wall_x = 80
+speed_z_hop = 20
+top_bottom_thickness = 1.2
+top_thickness = 1.2
+wall_thickness = 1.2
+z_seam_type = sharpest_corner
+z_seam_x = 110
+z_seam_y = 220

resources/quality/anycubic_kobra_max/anycubic_kobra_max_tpu.inst.cfg

@@ -0,0 +1,54 @@
+[general]
+version = 4
+name = Suggested parameters for TPU_V1.0
+definition = anycubic_kobra_max
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = tpu
+weight = 1
+global_quality = True
+
+[values]
+layer_height = 0.2
+acceleration_enabled = True
+jerk_enabled = False
+layer_height_0 = 0.3
+acceleration_print = 1000
+acceleration_travel = 3000
+brim_width = 5
+cool_fan_speed_0 = 10
+default_material_print_temperature = 210
+infill_overlap = 15
+infill_sparse_density = 15
+initial_layer_line_width_factor = 130
+jerk_print = 8
+jerk_travel = 10
+material_final_print_temperature = 210
+material_flow = 90
+material_flow_layer_0 = 100
+material_initial_print_temperature = 210
+material_print_temperature_layer_0 = 210
+optimize_wall_printing_order = False
+retraction_amount = 8
+retraction_hop = 0.075
+retraction_hop_enabled = True
+retraction_hop_only_when_collides = True
+retraction_min_travel = 1.5
+retraction_speed = 60
+skirt_brim_speed = 40
+speed_layer_0 = 40
+speed_print = 80
+speed_topbottom = 32
+speed_travel = 100
+speed_travel_layer_0 = 50
+speed_wall = 80
+speed_wall_0 = 45
+speed_wall_x = 80
+speed_z_hop = 10
+top_bottom_thickness = 1.2
+wall_thickness = 1.2
+z_seam_type = sharpest_corner
+z_seam_x = 110
+z_seam_y = 220