diff --git a/resources/extruders/ultimaker_method_extruder_left.def.json b/resources/extruders/ultimaker_method_extruder_left.def.json
new file mode 100644
index 0000000000..b64e66ad5d
--- /dev/null
+++ b/resources/extruders/ultimaker_method_extruder_left.def.json
@@ -0,0 +1,29 @@
+{
+    "version": 2,
+    "name": "Extruder 1",
+    "inherits": "fdmextruder",
+    "metadata": {
+        "machine": "ultimaker_method",
+        "position": "0"
+    },
+
+    "overrides": {
+        "extruder_nr": {
+            "default_value": 0,
+            "maximum_value": "1"
+        },
+        "machine_nozzle_size": { "default_value": 0.4 },
+        "material_diameter": { "default_value": 1.75 },
+        "machine_nozzle_offset_x": { "default_value": 0 },
+        "machine_nozzle_offset_y": { "default_value": 0 },
+        "machine_extruder_start_code": {
+            "default_value": "G0 X{prime_tower_position_x - prime_tower_size/2} Y{prime_tower_position_y + prime_tower_size/2} F6000\nM104 S{material_print_temperature}\nG4 S5\nG91\nG0 Z-0.4 F600\nG90\nM107 P{(extruder_nr+1)%2}\nM106 P{extruder_nr} S{cool_fan_speed_0/100}"
+        },
+        "machine_extruder_end_code": {
+            "default_value": "M106 P{extruder_nr} S1.0\nG91\nG0 Z0.4 F600\nG90\nG0 X{prime_tower_position_x - prime_tower_size/2} Y{prime_tower_position_y + prime_tower_size/2} F6000"
+        },
+        "machine_extruder_start_code_duration": {
+            "default_value":8
+        }
+    }
+}
diff --git a/resources/extruders/ultimaker_method_extruder_right.def.json b/resources/extruders/ultimaker_method_extruder_right.def.json
new file mode 100644
index 0000000000..ec4d40dd59
--- /dev/null
+++ b/resources/extruders/ultimaker_method_extruder_right.def.json
@@ -0,0 +1,29 @@
+{
+    "version": 2,
+    "name": "Extruder 2",
+    "inherits": "fdmextruder",
+    "metadata": {
+        "machine": "ultimaker_method",
+        "position": "1"
+    },
+
+    "overrides": {
+        "extruder_nr": {
+            "default_value": 1,
+            "maximum_value": "1"
+        },
+        "machine_nozzle_size": { "default_value": 0.4 },
+        "material_diameter": { "default_value": 1.75 },
+        "machine_nozzle_offset_x": { "default_value": 0 },
+        "machine_nozzle_offset_y": { "default_value": 0 },
+        "machine_extruder_start_code": {
+            "default_value": "G0 X{prime_tower_position_x - prime_tower_size/2} Y{prime_tower_position_y + prime_tower_size/2} F6000\nM104 S{material_print_temperature}\nG4 S5\nG91\nG0 Z-0.4 F600\nG90\nM107 P{(extruder_nr+1)%2}\nM106 P{extruder_nr} S{cool_fan_speed_0/100}"
+        },
+        "machine_extruder_end_code": {
+            "default_value": "M106 P{extruder_nr} S1.0\nG91\nG0 Z0.4 F600\nG90\nG0 X{prime_tower_position_x - prime_tower_size/2} Y{prime_tower_position_y + prime_tower_size/2} F6000"
+        },
+        "machine_extruder_start_code_duration": {
+            "default_value":8
+        }
+    }
+}
diff --git a/resources/intent/ultimaker_methodx/um_methodx_1a_um-pla-175_0.2mm_solid.inst.cfg b/resources/intent/ultimaker_methodx/um_methodx_1a_um-pla-175_0.2mm_solid.inst.cfg
new file mode 100644
index 0000000000..8293c9f51a
--- /dev/null
+++ b/resources/intent/ultimaker_methodx/um_methodx_1a_um-pla-175_0.2mm_solid.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+definition = ultimaker_methodx
+name = Solid
+version = 4
+
+[metadata]
+setting_version = 23
+variant = 1A
+material = ultimaker_pla_175
+quality_type = draft
+intent_category = solid
+type = intent
+
+[values]
+build_volume_temperature = 47
+infill_pattern = lines
+infill_sparse_density = 100
+
diff --git a/resources/intent/ultimaker_methodx/um_methodx_1c_um-pla-175_0.2mm_solid.inst.cfg b/resources/intent/ultimaker_methodx/um_methodx_1c_um-pla-175_0.2mm_solid.inst.cfg
new file mode 100644
index 0000000000..f98c3b0043
--- /dev/null
+++ b/resources/intent/ultimaker_methodx/um_methodx_1c_um-pla-175_0.2mm_solid.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+definition = ultimaker_methodx
+name = Solid
+version = 4
+
+[metadata]
+setting_version = 23
+variant = 1C
+material = ultimaker_pla_175
+quality_type = draft
+intent_category = solid
+type = intent
+
+[values]
+build_volume_temperature = 47
+infill_pattern = lines
+infill_sparse_density = 100
+
diff --git a/resources/intent/ultimaker_methodx/um_methodx_labs_um-pla-175_0.2mm_solid.inst.cfg b/resources/intent/ultimaker_methodx/um_methodx_labs_um-pla-175_0.2mm_solid.inst.cfg
new file mode 100644
index 0000000000..2c82f9dde9
--- /dev/null
+++ b/resources/intent/ultimaker_methodx/um_methodx_labs_um-pla-175_0.2mm_solid.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+definition = ultimaker_methodx
+name = Solid
+version = 4
+
+[metadata]
+setting_version = 23
+variant = LABS
+material = ultimaker_pla_175
+quality_type = draft
+intent_category = solid
+type = intent
+
+[values]
+build_volume_temperature = 47
+infill_pattern = lines
+infill_sparse_density = 100
+
diff --git a/resources/intent/ultimaker_methodxl/um_methodxl_1a_um-pla-175_0.2mm_solid.inst.cfg b/resources/intent/ultimaker_methodxl/um_methodxl_1a_um-pla-175_0.2mm_solid.inst.cfg
new file mode 100644
index 0000000000..9759b6ccd6
--- /dev/null
+++ b/resources/intent/ultimaker_methodxl/um_methodxl_1a_um-pla-175_0.2mm_solid.inst.cfg
@@ -0,0 +1,19 @@
+[general]
+definition = ultimaker_methodxl
+name = Solid
+version = 4
+
+[metadata]
+setting_version = 23
+variant = 1A
+material = ultimaker_pla_175
+quality_type = draft
+intent_category = solid
+type = intent
+
+[values]
+build_plate_temperature = 45
+build_volume_temperature = 45
+infill_pattern = lines
+infill_sparse_density = 100
+
diff --git a/resources/intent/ultimaker_methodxl/um_methodxl_1c_um-pla-175_0.2mm_solid.inst.cfg b/resources/intent/ultimaker_methodxl/um_methodxl_1c_um-pla-175_0.2mm_solid.inst.cfg
new file mode 100644
index 0000000000..3d6d9ab875
--- /dev/null
+++ b/resources/intent/ultimaker_methodxl/um_methodxl_1c_um-pla-175_0.2mm_solid.inst.cfg
@@ -0,0 +1,19 @@
+[general]
+definition = ultimaker_methodxl
+name = Solid
+version = 4
+
+[metadata]
+setting_version = 23
+variant = 1C
+material = ultimaker_pla_175
+quality_type = draft
+intent_category = solid
+type = intent
+
+[values]
+build_plate_temperature = 45
+build_volume_temperature = 45
+infill_pattern = lines
+infill_sparse_density = 100
+
diff --git a/resources/intent/ultimaker_methodxl/um_methodxl_labs_um-pla-175_0.2mm_solid.inst.cfg b/resources/intent/ultimaker_methodxl/um_methodxl_labs_um-pla-175_0.2mm_solid.inst.cfg
new file mode 100644
index 0000000000..f27719fb38
--- /dev/null
+++ b/resources/intent/ultimaker_methodxl/um_methodxl_labs_um-pla-175_0.2mm_solid.inst.cfg
@@ -0,0 +1,19 @@
+[general]
+definition = ultimaker_methodxl
+name = Solid
+version = 4
+
+[metadata]
+setting_version = 23
+variant = LABS
+material = ultimaker_pla_175
+quality_type = draft
+intent_category = solid
+type = intent
+
+[values]
+build_plate_temperature = 45
+build_volume_temperature = 45
+infill_pattern = lines
+infill_sparse_density = 100
+
diff --git a/resources/quality/ultimaker_methodx/um_methodx_1a_um-pla-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodx/um_methodx_1a_um-pla-175_0.2mm.inst.cfg
new file mode 100644
index 0000000000..d8d1aba9e8
--- /dev/null
+++ b/resources/quality/ultimaker_methodx/um_methodx_1a_um-pla-175_0.2mm.inst.cfg
@@ -0,0 +1,84 @@
+[general]
+definition = ultimaker_methodx
+name = Fast
+version = 4
+
+[metadata]
+setting_version = 23
+variant = 1A
+material = ultimaker_pla_175
+quality_type = draft
+type = quality
+weight = -2
+
+[values]
+bottom_layers = 4
+cool_fan_enabled = True
+cool_fan_full_layer = 4
+cool_fan_speed = 100
+cool_fan_speed_0 = 0
+cool_min_layer_time = 10
+cool_min_speed = 5
+cool_min_temperature = 205
+infill_sparse_density = 15
+material_final_print_temperature = 210
+material_initial_print_temperature = 210
+material_print_temperature = 210
+material_print_temperature_layer_0 = 225
+material_standby_temperature = 160
+min_bead_width = =line_width * 0.75
+min_wall_line_width = =line_width * 0.75
+raft_airgap = 0.18
+raft_base_line_spacing = 4
+raft_base_line_width = 1.2
+raft_base_speed = =raft_speed
+raft_base_thickness = 0.6
+raft_interface_fan_speed = 0
+raft_interface_layers = 1
+raft_interface_line_spacing = 0.75
+raft_interface_speed = 60
+raft_interface_thickness = 0.2
+raft_speed = 30
+raft_surface_fan_speed = 0
+raft_surface_line_spacing = 0.425
+raft_surface_speed = 90
+raft_surface_wall_count = 2
+retract_at_layer_change = True
+skin_material_flow_layer_0 = =material_flow
+speed_layer_0 = 15
+speed_print = 150
+speed_roofing = =speed_print / 3
+speed_support = =speed_print
+speed_support_interface = 65
+speed_topbottom = =speed_print * 0.6
+speed_wall = =speed_print / 6
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+support_angle = 50.0
+support_bottom_distance = =layer_height
+support_bottom_enable = False
+support_fan_enable = True
+support_infill_angles = [45 ]
+support_infill_rate = 12
+support_infill_sparse_thickness = =layer_height
+support_interface_density = 83
+support_interface_height = =layer_height * 4
+support_interface_material_flow = =material_flow * 0.9
+support_interface_offset = 1
+support_interface_wall_count = 0
+support_line_width = line_width * 0.75
+support_material_flow = =material_flow * 0.8
+support_offset = 3
+support_roof_density = =support_interface_density
+support_roof_height = =layer_height * 4
+support_roof_line_width = =line_width
+support_roof_material_flow = =support_interface_material_flow
+support_roof_wall_count = 1
+support_xy_distance = 0.3
+support_xy_distance_overhang = 0.1
+support_xy_overrides_z = xy_overrides_z
+support_z_distance = 0.15
+switch_extruder_retraction_amount = 0.5
+wall_0_material_flow_layer_0 = =material_flow
+wall_x_material_flow_layer_0 = =material_flow
+
diff --git a/resources/quality/ultimaker_methodx/um_methodx_1c_um-pla-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodx/um_methodx_1c_um-pla-175_0.2mm.inst.cfg
new file mode 100644
index 0000000000..2ee6e68d37
--- /dev/null
+++ b/resources/quality/ultimaker_methodx/um_methodx_1c_um-pla-175_0.2mm.inst.cfg
@@ -0,0 +1,84 @@
+[general]
+definition = ultimaker_methodx
+name = Fast
+version = 4
+
+[metadata]
+setting_version = 23
+variant = 1C
+material = ultimaker_pla_175
+quality_type = draft
+type = quality
+weight = -2
+
+[values]
+bottom_layers = 4
+cool_fan_enabled = True
+cool_fan_full_layer = 4
+cool_fan_speed = 100
+cool_fan_speed_0 = 0
+cool_min_layer_time = 10
+cool_min_speed = 5
+cool_min_temperature = 205
+infill_sparse_density = 15
+material_final_print_temperature = 210
+material_initial_print_temperature = 210
+material_print_temperature = 210
+material_print_temperature_layer_0 = 225
+material_standby_temperature = 160
+min_bead_width = =line_width * 0.75
+min_wall_line_width = =line_width * 0.75
+raft_airgap = 0.18
+raft_base_line_spacing = 4
+raft_base_line_width = 1.2
+raft_base_speed = =raft_speed
+raft_base_thickness = 0.6
+raft_interface_fan_speed = 0
+raft_interface_layers = 1
+raft_interface_line_spacing = 0.75
+raft_interface_speed = 60
+raft_interface_thickness = 0.2
+raft_speed = 30
+raft_surface_fan_speed = 0
+raft_surface_line_spacing = 0.425
+raft_surface_speed = 90
+raft_surface_wall_count = 2
+retract_at_layer_change = True
+skin_material_flow_layer_0 = =material_flow
+speed_layer_0 = 15
+speed_print = 150
+speed_roofing = =speed_print / 3
+speed_support = =speed_print
+speed_support_interface = 65
+speed_topbottom = =speed_print * 0.6
+speed_wall = =speed_print / 6
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+support_angle = 50.0
+support_bottom_distance = =layer_height
+support_bottom_enable = False
+support_fan_enable = True
+support_infill_angles = [45 ]
+support_infill_rate = 12
+support_infill_sparse_thickness = =layer_height
+support_interface_density = 83
+support_interface_height = =layer_height * 4
+support_interface_material_flow = =material_flow * 0.9
+support_interface_offset = 1
+support_interface_wall_count = 0
+support_line_width = line_width * 0.75
+support_material_flow = =material_flow * 0.8
+support_offset = 3
+support_roof_density = =support_interface_density
+support_roof_height = =layer_height * 4
+support_roof_line_width = =line_width
+support_roof_material_flow = =support_interface_material_flow
+support_roof_wall_count = 1
+support_xy_distance = 0.3
+support_xy_distance_overhang = 0.1
+support_xy_overrides_z = xy_overrides_z
+support_z_distance = 0.15
+switch_extruder_retraction_amount = 0.5
+wall_0_material_flow_layer_0 = =material_flow
+wall_x_material_flow_layer_0 = =material_flow
+
diff --git a/resources/quality/ultimaker_methodx/um_methodx_2a_um-pva-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodx/um_methodx_2a_um-pva-175_0.2mm.inst.cfg
new file mode 100644
index 0000000000..1f5ac00167
--- /dev/null
+++ b/resources/quality/ultimaker_methodx/um_methodx_2a_um-pva-175_0.2mm.inst.cfg
@@ -0,0 +1,77 @@
+[general]
+definition = ultimaker_methodx
+name = Fast
+version = 4
+
+[metadata]
+setting_version = 23
+variant = 2A
+material = ultimaker_pva_175
+quality_type = draft
+type = quality
+weight = -2
+
+[values]
+brim_replaces_support = False
+cool_fan_enabled = False
+cool_min_speed = 5
+cool_min_temperature = =material_print_temperature
+initial_layer_line_width_factor = 300
+material_bed_temperature = 45
+material_bed_temperature_layer_0 = 50
+material_final_print_temperature = 210
+material_initial_print_temperature = 210
+material_print_temperature = 210
+material_print_temperature_layer_0 = 220
+material_standby_temperature = 160
+prime_tower_flow = 125
+raft_airgap = 0.0
+raft_base_wall_count = 4
+raft_interface_flow = 110
+raft_interface_infill_overlap = 50
+raft_interface_layers = 1
+raft_interface_line_spacing = 0.9
+raft_interface_line_width = 1
+raft_interface_speed = 15
+raft_interface_z_offset = -0.05
+raft_surface_flow = 110
+raft_surface_infill_overlap = 50
+raft_surface_line_spacing = 0.44
+raft_surface_line_width = 0.4
+raft_surface_speed = 20
+raft_surface_thickness = 0.27
+raft_surface_z_offset = -0.075
+retraction_speed = 1.75
+speed_layer_0 = 10
+speed_prime_tower = 10
+speed_print = 50
+speed_roofing = 50
+speed_support = 50
+speed_support_bottom = 10
+speed_support_interface = 50
+speed_topbottom = 50
+speed_wall_0 = 50
+speed_wall_x = 50
+support_angle = 50
+support_bottom_density = 99
+support_bottom_height = 0.406
+support_bottom_line_width = 1.2
+support_bottom_wall_count = 2
+support_conical_angle = 20
+support_conical_min_width = 20
+support_fan_enable = False
+support_infill_density_multiplier_layer_0 = 2
+support_infill_rate = 12
+support_infill_sparse_thickness = =min(layer_height * 2, machine_nozzle_size * 3 / 4) if layer_height <= 0.15 / 0.4 * machine_nozzle_size else layer_height
+support_interface_enable = True
+support_interface_offset = 0.8
+support_pattern = grid
+support_roof_density = 95
+support_roof_height = =layer_height*8
+support_wall_count = 2
+support_xy_distance = 0.2
+support_z_distance = 0
+switch_extruder_extra_prime_amount = 1
+switch_extruder_retraction_amount = 2.5
+switch_extruder_retraction_speeds = 3
+
diff --git a/resources/quality/ultimaker_methodx/um_methodx_labs_um-pla-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodx/um_methodx_labs_um-pla-175_0.2mm.inst.cfg
new file mode 100644
index 0000000000..5b615d9329
--- /dev/null
+++ b/resources/quality/ultimaker_methodx/um_methodx_labs_um-pla-175_0.2mm.inst.cfg
@@ -0,0 +1,84 @@
+[general]
+definition = ultimaker_methodx
+name = Fast
+version = 4
+
+[metadata]
+setting_version = 23
+variant = LABS
+material = ultimaker_pla_175
+quality_type = draft
+type = quality
+weight = -2
+
+[values]
+bottom_layers = 4
+cool_fan_enabled = True
+cool_fan_full_layer = 4
+cool_fan_speed = 100
+cool_fan_speed_0 = 0
+cool_min_layer_time = 10
+cool_min_speed = 5
+cool_min_temperature = 205
+infill_sparse_density = 15
+material_final_print_temperature = 210
+material_initial_print_temperature = 210
+material_print_temperature = 210
+material_print_temperature_layer_0 = 225
+material_standby_temperature = 160
+min_bead_width = =line_width * 0.75
+min_wall_line_width = =line_width * 0.75
+raft_airgap = 0.18
+raft_base_line_spacing = 4
+raft_base_line_width = 1.2
+raft_base_speed = =raft_speed
+raft_base_thickness = 0.6
+raft_interface_fan_speed = 0
+raft_interface_layers = 1
+raft_interface_line_spacing = 0.75
+raft_interface_speed = 60
+raft_interface_thickness = 0.2
+raft_speed = 30
+raft_surface_fan_speed = 0
+raft_surface_line_spacing = 0.425
+raft_surface_speed = 90
+raft_surface_wall_count = 2
+retract_at_layer_change = True
+skin_material_flow_layer_0 = =material_flow
+speed_layer_0 = 15
+speed_print = 150
+speed_roofing = =speed_print / 3
+speed_support = =speed_print
+speed_support_interface = 65
+speed_topbottom = =speed_print * 0.6
+speed_wall = =speed_print / 6
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+support_angle = 50.0
+support_bottom_distance = =layer_height
+support_bottom_enable = False
+support_fan_enable = True
+support_infill_angles = [45 ]
+support_infill_rate = 12
+support_infill_sparse_thickness = =layer_height
+support_interface_density = 83
+support_interface_height = =layer_height * 4
+support_interface_material_flow = =material_flow * 0.9
+support_interface_offset = 1
+support_interface_wall_count = 0
+support_line_width = line_width * 0.75
+support_material_flow = =material_flow * 0.8
+support_offset = 3
+support_roof_density = =support_interface_density
+support_roof_height = =layer_height * 4
+support_roof_line_width = =line_width
+support_roof_material_flow = =support_interface_material_flow
+support_roof_wall_count = 1
+support_xy_distance = 0.3
+support_xy_distance_overhang = 0.1
+support_xy_overrides_z = xy_overrides_z
+support_z_distance = 0.15
+switch_extruder_retraction_amount = 0.5
+wall_0_material_flow_layer_0 = =material_flow
+wall_x_material_flow_layer_0 = =material_flow
+
diff --git a/resources/quality/ultimaker_methodxl/um_methodxl_1a_um-pla-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodxl/um_methodxl_1a_um-pla-175_0.2mm.inst.cfg
new file mode 100644
index 0000000000..c43848cd42
--- /dev/null
+++ b/resources/quality/ultimaker_methodxl/um_methodxl_1a_um-pla-175_0.2mm.inst.cfg
@@ -0,0 +1,87 @@
+[general]
+definition = ultimaker_methodxl
+name = Fast
+version = 4
+
+[metadata]
+setting_version = 23
+variant = 1A
+material = ultimaker_pla_175
+quality_type = draft
+type = quality
+weight = -2
+
+[values]
+bottom_layers = 4
+cool_fan_enabled = True
+cool_fan_full_layer = 4
+cool_fan_speed = 100
+cool_fan_speed_0 = 0
+cool_min_layer_time = 10
+cool_min_speed = 5
+cool_min_temperature = 205
+default_material_bed_temperature = 45
+infill_sparse_density = 15
+material_bed_temperature = =default_material_bed_temperature
+material_bed_temperature_layer_0 = =default_material_bed_temperature + 5
+material_final_print_temperature = 210
+material_initial_print_temperature = 210
+material_print_temperature = 210
+material_print_temperature_layer_0 = 225
+material_standby_temperature = 160
+min_bead_width = =line_width * 0.75
+min_wall_line_width = =line_width * 0.75
+raft_airgap = 0.18
+raft_base_line_spacing = 4
+raft_base_line_width = 1.2
+raft_base_speed = =raft_speed
+raft_base_thickness = 0.6
+raft_interface_fan_speed = 0
+raft_interface_layers = 2
+raft_interface_line_spacing = 0.7
+raft_interface_speed = 60
+raft_interface_thickness = 0.3
+raft_speed = 30
+raft_surface_fan_speed = 0
+raft_surface_line_spacing = 0.425
+raft_surface_speed = 90
+raft_surface_wall_count = 2
+retract_at_layer_change = True
+skin_material_flow_layer_0 = =material_flow
+speed_layer_0 = 15
+speed_print = 150
+speed_roofing = =speed_print / 3
+speed_support = =speed_print
+speed_support_interface = 65
+speed_topbottom = =speed_print * 0.6
+speed_wall = =speed_print / 6
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+support_angle = 50.0
+support_bottom_distance = =layer_height
+support_bottom_enable = False
+support_fan_enable = True
+support_infill_angles = [45 ]
+support_infill_rate = 12
+support_infill_sparse_thickness = =layer_height
+support_interface_density = 83
+support_interface_height = =layer_height * 4
+support_interface_material_flow = =material_flow * 0.9
+support_interface_offset = 1
+support_interface_wall_count = 0
+support_line_width = line_width * 0.75
+support_material_flow = =material_flow * 0.8
+support_offset = 3
+support_roof_density = =support_interface_density
+support_roof_height = =layer_height * 4
+support_roof_line_width = =line_width
+support_roof_material_flow = =support_interface_material_flow
+support_roof_wall_count = 1
+support_xy_distance = 0.3
+support_xy_distance_overhang = 0.1
+support_xy_overrides_z = xy_overrides_z
+support_z_distance = 0.15
+switch_extruder_retraction_amount = 0.5
+wall_0_material_flow_layer_0 = =material_flow
+wall_x_material_flow_layer_0 = =material_flow
+
diff --git a/resources/quality/ultimaker_methodxl/um_methodxl_1c_um-pla-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodxl/um_methodxl_1c_um-pla-175_0.2mm.inst.cfg
new file mode 100644
index 0000000000..cc774cfe15
--- /dev/null
+++ b/resources/quality/ultimaker_methodxl/um_methodxl_1c_um-pla-175_0.2mm.inst.cfg
@@ -0,0 +1,87 @@
+[general]
+definition = ultimaker_methodxl
+name = Fast
+version = 4
+
+[metadata]
+setting_version = 23
+variant = 1C
+material = ultimaker_pla_175
+quality_type = draft
+type = quality
+weight = -2
+
+[values]
+bottom_layers = 4
+cool_fan_enabled = True
+cool_fan_full_layer = 4
+cool_fan_speed = 100
+cool_fan_speed_0 = 0
+cool_min_layer_time = 10
+cool_min_speed = 5
+cool_min_temperature = 205
+default_material_bed_temperature = 45
+infill_sparse_density = 15
+material_bed_temperature = =default_material_bed_temperature
+material_bed_temperature_layer_0 = =default_material_bed_temperature + 5
+material_final_print_temperature = 210
+material_initial_print_temperature = 210
+material_print_temperature = 210
+material_print_temperature_layer_0 = 225
+material_standby_temperature = 160
+min_bead_width = =line_width * 0.75
+min_wall_line_width = =line_width * 0.75
+raft_airgap = 0.18
+raft_base_line_spacing = 4
+raft_base_line_width = 1.2
+raft_base_speed = =raft_speed
+raft_base_thickness = 0.6
+raft_interface_fan_speed = 0
+raft_interface_layers = 2
+raft_interface_line_spacing = 0.7
+raft_interface_speed = 60
+raft_interface_thickness = 0.3
+raft_speed = 30
+raft_surface_fan_speed = 0
+raft_surface_line_spacing = 0.425
+raft_surface_speed = 90
+raft_surface_wall_count = 2
+retract_at_layer_change = True
+skin_material_flow_layer_0 = =material_flow
+speed_layer_0 = 15
+speed_print = 150
+speed_roofing = =speed_print / 3
+speed_support = =speed_print
+speed_support_interface = 65
+speed_topbottom = =speed_print * 0.6
+speed_wall = =speed_print / 6
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+support_angle = 50.0
+support_bottom_distance = =layer_height
+support_bottom_enable = False
+support_fan_enable = True
+support_infill_angles = [45 ]
+support_infill_rate = 12
+support_infill_sparse_thickness = =layer_height
+support_interface_density = 83
+support_interface_height = =layer_height * 4
+support_interface_material_flow = =material_flow * 0.9
+support_interface_offset = 1
+support_interface_wall_count = 0
+support_line_width = line_width * 0.75
+support_material_flow = =material_flow * 0.8
+support_offset = 3
+support_roof_density = =support_interface_density
+support_roof_height = =layer_height * 4
+support_roof_line_width = =line_width
+support_roof_material_flow = =support_interface_material_flow
+support_roof_wall_count = 1
+support_xy_distance = 0.3
+support_xy_distance_overhang = 0.1
+support_xy_overrides_z = xy_overrides_z
+support_z_distance = 0.15
+switch_extruder_retraction_amount = 0.5
+wall_0_material_flow_layer_0 = =material_flow
+wall_x_material_flow_layer_0 = =material_flow
+
diff --git a/resources/quality/ultimaker_methodxl/um_methodxl_2a_um-pva-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodxl/um_methodxl_2a_um-pva-175_0.2mm.inst.cfg
new file mode 100644
index 0000000000..2eb21fb62f
--- /dev/null
+++ b/resources/quality/ultimaker_methodxl/um_methodxl_2a_um-pva-175_0.2mm.inst.cfg
@@ -0,0 +1,77 @@
+[general]
+definition = ultimaker_methodxl
+name = Fast
+version = 4
+
+[metadata]
+setting_version = 23
+variant = 2A
+material = ultimaker_pva_175
+quality_type = draft
+type = quality
+weight = -2
+
+[values]
+brim_replaces_support = False
+cool_fan_enabled = False
+cool_min_speed = 5
+cool_min_temperature = =material_print_temperature
+initial_layer_line_width_factor = 300
+material_bed_temperature = 45
+material_bed_temperature_layer_0 = 50
+material_final_print_temperature = 210
+material_initial_print_temperature = 210
+material_print_temperature = 210
+material_print_temperature_layer_0 = 220
+material_standby_temperature = 160
+prime_tower_flow = 125
+raft_airgap = 0.0
+raft_base_wall_count = 4
+raft_interface_flow = 110
+raft_interface_infill_overlap = 50
+raft_interface_layers = 1
+raft_interface_line_spacing = 0.9
+raft_interface_line_width = 1
+raft_interface_speed = 15
+raft_interface_z_offset = -0.05
+raft_surface_flow = 110
+raft_surface_infill_overlap = 50
+raft_surface_line_spacing = 0.44
+raft_surface_line_width = 0.4
+raft_surface_speed = 20
+raft_surface_thickness = 0.27
+raft_surface_z_offset = -0.075
+retraction_speed = 1.75
+speed_layer_0 = 10
+speed_prime_tower = 10
+speed_print = 50
+speed_roofing = 50
+speed_support = 50
+speed_support_bottom = 10
+speed_support_interface = 50
+speed_topbottom = 50
+speed_wall_0 = 50
+speed_wall_x = 50
+support_angle = 50
+support_bottom_density = 99
+support_bottom_height = 0.406
+support_bottom_line_width = 1.2
+support_bottom_wall_count = 2
+support_conical_angle = 20
+support_conical_min_width = 20
+support_fan_enable = False
+support_infill_density_multiplier_layer_0 = 2
+support_infill_rate = 12
+support_infill_sparse_thickness = =min(layer_height * 2, machine_nozzle_size * 3 / 4) if layer_height <= 0.15 / 0.4 * machine_nozzle_size else layer_height
+support_interface_enable = True
+support_interface_offset = 0.8
+support_pattern = grid
+support_roof_density = 95
+support_roof_height = =layer_height*8
+support_wall_count = 2
+support_xy_distance = 0.2
+support_z_distance = 0
+switch_extruder_extra_prime_amount = 1
+switch_extruder_retraction_amount = 2.5
+switch_extruder_retraction_speeds = 3
+
diff --git a/resources/quality/ultimaker_methodxl/um_methodxl_labs_um-pla-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodxl/um_methodxl_labs_um-pla-175_0.2mm.inst.cfg
new file mode 100644
index 0000000000..cb6738bc3e
--- /dev/null
+++ b/resources/quality/ultimaker_methodxl/um_methodxl_labs_um-pla-175_0.2mm.inst.cfg
@@ -0,0 +1,87 @@
+[general]
+definition = ultimaker_methodxl
+name = Fast
+version = 4
+
+[metadata]
+setting_version = 23
+variant = LABS
+material = ultimaker_pla_175
+quality_type = draft
+type = quality
+weight = -2
+
+[values]
+bottom_layers = 4
+cool_fan_enabled = True
+cool_fan_full_layer = 4
+cool_fan_speed = 100
+cool_fan_speed_0 = 0
+cool_min_layer_time = 10
+cool_min_speed = 5
+cool_min_temperature = 205
+default_material_bed_temperature = 45
+infill_sparse_density = 15
+material_bed_temperature = =default_material_bed_temperature
+material_bed_temperature_layer_0 = =default_material_bed_temperature + 5
+material_final_print_temperature = 210
+material_initial_print_temperature = 210
+material_print_temperature = 210
+material_print_temperature_layer_0 = 225
+material_standby_temperature = 160
+min_bead_width = =line_width * 0.75
+min_wall_line_width = =line_width * 0.75
+raft_airgap = 0.18
+raft_base_line_spacing = 4
+raft_base_line_width = 1.2
+raft_base_speed = =raft_speed
+raft_base_thickness = 0.6
+raft_interface_fan_speed = 0
+raft_interface_layers = 2
+raft_interface_line_spacing = 0.7
+raft_interface_speed = 60
+raft_interface_thickness = 0.3
+raft_speed = 30
+raft_surface_fan_speed = 0
+raft_surface_line_spacing = 0.425
+raft_surface_speed = 90
+raft_surface_wall_count = 2
+retract_at_layer_change = True
+skin_material_flow_layer_0 = =material_flow
+speed_layer_0 = 15
+speed_print = 150
+speed_roofing = =speed_print / 3
+speed_support = =speed_print
+speed_support_interface = 65
+speed_topbottom = =speed_print * 0.6
+speed_wall = =speed_print / 6
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+support_angle = 50.0
+support_bottom_distance = =layer_height
+support_bottom_enable = False
+support_fan_enable = True
+support_infill_angles = [45 ]
+support_infill_rate = 12
+support_infill_sparse_thickness = =layer_height
+support_interface_density = 83
+support_interface_height = =layer_height * 4
+support_interface_material_flow = =material_flow * 0.9
+support_interface_offset = 1
+support_interface_wall_count = 0
+support_line_width = line_width * 0.75
+support_material_flow = =material_flow * 0.8
+support_offset = 3
+support_roof_density = =support_interface_density
+support_roof_height = =layer_height * 4
+support_roof_line_width = =line_width
+support_roof_material_flow = =support_interface_material_flow
+support_roof_wall_count = 1
+support_xy_distance = 0.3
+support_xy_distance_overhang = 0.1
+support_xy_overrides_z = xy_overrides_z
+support_z_distance = 0.15
+switch_extruder_retraction_amount = 0.5
+wall_0_material_flow_layer_0 = =material_flow
+wall_x_material_flow_layer_0 = =material_flow
+
diff --git a/resources/variants/ultimaker_methodx_2A.inst.cfg b/resources/variants/ultimaker_methodx_2A.inst.cfg
new file mode 100644
index 0000000000..49edb9cf3c
--- /dev/null
+++ b/resources/variants/ultimaker_methodx_2A.inst.cfg
@@ -0,0 +1,15 @@
+[general]
+definition = ultimaker_methodx
+name = 2A
+version = 4
+
+[metadata]
+hardware_type = nozzle
+reference_extruder_id = mk14_s
+setting_version = 23
+type = variant
+
+[values]
+machine_nozzle_id = 2A
+machine_nozzle_size = 0.4
+
diff --git a/resources/variants/ultimaker_methodxl_1A.inst.cfg b/resources/variants/ultimaker_methodxl_1A.inst.cfg
new file mode 100644
index 0000000000..b7a54d8242
--- /dev/null
+++ b/resources/variants/ultimaker_methodxl_1A.inst.cfg
@@ -0,0 +1,15 @@
+[general]
+definition = ultimaker_methodxl
+name = 1A
+version = 4
+
+[metadata]
+hardware_type = nozzle
+reference_extruder_id = mk14
+setting_version = 23
+type = variant
+
+[values]
+machine_nozzle_id = 1A
+machine_nozzle_size = 0.4
+
diff --git a/resources/variants/ultimaker_methodxl_2A.inst.cfg b/resources/variants/ultimaker_methodxl_2A.inst.cfg
new file mode 100644
index 0000000000..3a93dfdd9f
--- /dev/null
+++ b/resources/variants/ultimaker_methodxl_2A.inst.cfg
@@ -0,0 +1,15 @@
+[general]
+definition = ultimaker_methodxl
+name = 2A
+version = 4
+
+[metadata]
+hardware_type = nozzle
+reference_extruder_id = mk14_s
+setting_version = 23
+type = variant
+
+[values]
+machine_nozzle_id = 2A
+machine_nozzle_size = 0.4
+