From 946bf033066e561827da4d00afbc3b680cd7e552 Mon Sep 17 00:00:00 2001 From: Erwan MATHIEU Date: Tue, 13 Aug 2024 15:56:01 +0200 Subject: [PATCH 1/7] Revert "Merge branch 'main' into 5.8" This reverts commit fec7637615fd05fb052848bb1cd569840d650ebd, reversing changes made to 081b9b543b564ac6c2a840916162a06b289c5d94. --- .github/ISSUE_TEMPLATE/SlicingCrash.yaml | 6 +- conandata.yml | 14 +-- cura/API/Interface/Settings.py | 62 +--------- cura/PrinterOutput/FormatMaps.py | 106 ------------------ .../Models/ExtruderConfigurationModel.py | 15 ++- .../Models/MaterialOutputModel.py | 30 ++++- .../NetworkedPrinterOutputDevice.py | 13 ++- plugins/3MFWriter/ThreeMFWriter.py | 16 ++- plugins/CuraEngineBackend/StartSliceJob.py | 7 +- plugins/MakerbotWriter/MakerbotWriter.py | 27 +---- plugins/UFPWriter/UFPWriter.py | 58 +++++++++- .../XmlMaterialProfile/XmlMaterialProfile.py | 30 ++++- .../XmlMaterialProfile}/product_to_id.json | 0 .../definitions/Mark2_for_Ultimaker2.def.json | 1 + resources/definitions/atom3.def.json | 1 + resources/definitions/creality_crm4.def.json | 18 --- resources/definitions/diy220.def.json | 1 + resources/definitions/dxu.def.json | 1 + resources/definitions/erzay3d.def.json | 1 + resources/definitions/fdmextruder.def.json | 11 -- resources/definitions/fdmprinter.def.json | 54 ++------- resources/definitions/maker_starter.def.json | 1 + resources/definitions/mendel90.def.json | 1 + ...tur3d_discov3ry1_complete_um2plus.def.json | 1 + resources/definitions/tam.def.json | 1 + resources/definitions/ultimaker2.def.json | 1 + .../definitions/ultimaker2_plus.def.json | 1 + .../ultimaker2_plus_connect.def.json | 1 + resources/extruders/Mark2_extruder1.def.json | 1 - resources/extruders/Mark2_extruder2.def.json | 1 - resources/extruders/atom3_extruder_0.def.json | 1 - .../extruders/diy220_extruder_0.def.json | 1 - resources/extruders/dxu_extruder1.def.json | 1 - resources/extruders/dxu_extruder2.def.json | 1 - .../extruders/erzay3d_extruder_0.def.json | 1 - .../maker_starter_extruder_0.def.json | 1 - .../extruders/mendel90_extruder_0.def.json | 1 - ...v3ry1_complete_um2plus_extruder_0.def.json | 1 - resources/extruders/tam_extruder_0.def.json | 1 - .../extruders/ultimaker2_extruder_0.def.json | 1 - ...ltimaker2_plus_connect_extruder_0.def.json | 1 - .../ultimaker2_plus_extruder_0.def.json | 1 - resources/i18n/cura.pot | 4 +- 43 files changed, 171 insertions(+), 326 deletions(-) delete mode 100644 cura/PrinterOutput/FormatMaps.py rename {resources/texts => plugins/XmlMaterialProfile}/product_to_id.json (100%) delete mode 100644 resources/definitions/creality_crm4.def.json diff --git a/.github/ISSUE_TEMPLATE/SlicingCrash.yaml b/.github/ISSUE_TEMPLATE/SlicingCrash.yaml index 06025886a2..0d93977627 100644 --- a/.github/ISSUE_TEMPLATE/SlicingCrash.yaml +++ b/.github/ISSUE_TEMPLATE/SlicingCrash.yaml @@ -6,9 +6,9 @@ body: attributes: value: | ### ✨Try our improved Cura 5.7✨ - Before filling out the report below, we want you to try the latest Cura 5.7. + Before filling out the report below, we want you to try the latest Cura 5.7 Beta. This version of Cura has become significantly more reliable and has an updated slicing engine that will automatically send a report to the Cura Team for analysis. - #### [You can find the downloads here](https://github.com/Ultimaker/Cura/releases/latest) #### + #### [You can find the downloads here](https://github.com/Ultimaker/Cura/releases/tag/5.7.0-beta.1) #### If you still encounter a crash you are still welcome to report the issue so we can use your model as a test case, you can find instructions on how to do that below. ### Project File @@ -35,7 +35,7 @@ body: - type: markdown attributes: value: | - We work hard on improving our slicing crashes. Our most recent release is 5.7.1. + We work hard on improving our slicing crashes. Our most recent release is 5.6.0. If you are not on the latest version of Cura, [you can download it here](https://github.com/Ultimaker/Cura/releases/latest) - type: input attributes: diff --git a/conandata.yml b/conandata.yml index 0640813146..83bfd935a0 100644 --- a/conandata.yml +++ b/conandata.yml @@ -1,17 +1,17 @@ -version: "5.9.0-alpha.0" +version: "5.8.0" requirements: - - "cura_resources/(latest)@ultimaker/testing" - - "uranium/(latest)@ultimaker/testing" - - "curaengine/(latest)@ultimaker/testing" - - "cura_binary_data/(latest)@ultimaker/testing" - - "fdm_materials/(latest)@ultimaker/testing" + - "cura_resources/5.8.0" + - "uranium/5.8.0" + - "curaengine/5.8.0" + - "cura_binary_data/5.8.0" + - "fdm_materials/5.8.0" - "curaengine_plugin_gradual_flow/0.1.0-beta.4" - "dulcificum/0.2.1" - "pysavitar/5.3.0" - "pynest2d/5.3.0" - "native_cad_plugin/2.0.0" requirements_internal: - - "fdm_materials/(latest)@internal/testing" + - "fdm_materials/5.8.0" - "cura_private_data/(latest)@internal/testing" urls: default: diff --git a/cura/API/Interface/Settings.py b/cura/API/Interface/Settings.py index 084023b9bd..706a6d8c74 100644 --- a/cura/API/Interface/Settings.py +++ b/cura/API/Interface/Settings.py @@ -1,13 +1,7 @@ # Copyright (c) 2018 Ultimaker B.V. # Cura is released under the terms of the LGPLv3 or higher. -from dataclasses import asdict - -from typing import cast, Dict, TYPE_CHECKING - -from UM.Settings.InstanceContainer import InstanceContainer -from UM.Settings.SettingFunction import SettingFunction -from cura.Settings.GlobalStack import GlobalStack +from typing import TYPE_CHECKING if TYPE_CHECKING: from cura.CuraApplication import CuraApplication @@ -53,57 +47,3 @@ class Settings: """ return self.application.getSidebarCustomMenuItems() - - def getSliceMetadata(self) -> Dict[str, Dict[str, Dict[str, str]]]: - """Get all changed settings and all settings. For each extruder and the global stack""" - print_information = self.application.getPrintInformation() - machine_manager = self.application.getMachineManager() - settings = { - "material": { - "length": print_information.materialLengths, - "weight": print_information.materialWeights, - "cost": print_information.materialCosts, - }, - "global": { - "changes": {}, - "all_settings": {}, - }, - "quality": asdict(machine_manager.activeQualityDisplayNameMap()), - } - - def _retrieveValue(container: InstanceContainer, setting_: str): - value_ = container.getProperty(setting_, "value") - for _ in range(0, 1024): # Prevent possibly endless loop by not using a limit. - if not isinstance(value_, SettingFunction): - return value_ # Success! - value_ = value_(container) - return 0 # Fallback value after breaking possibly endless loop. - - global_stack = cast(GlobalStack, self.application.getGlobalContainerStack()) - - # Add global user or quality changes - global_flattened_changes = InstanceContainer.createMergedInstanceContainer(global_stack.userChanges, global_stack.qualityChanges) - for setting in global_flattened_changes.getAllKeys(): - settings["global"]["changes"][setting] = _retrieveValue(global_flattened_changes, setting) - - # Get global all settings values without user or quality changes - for setting in global_stack.getAllKeys(): - settings["global"]["all_settings"][setting] = _retrieveValue(global_stack, setting) - - for i, extruder in enumerate(global_stack.extruderList): - # Add extruder fields to settings dictionary - settings[f"extruder_{i}"] = { - "changes": {}, - "all_settings": {}, - } - - # Add extruder user or quality changes - extruder_flattened_changes = InstanceContainer.createMergedInstanceContainer(extruder.userChanges, extruder.qualityChanges) - for setting in extruder_flattened_changes.getAllKeys(): - settings[f"extruder_{i}"]["changes"][setting] = _retrieveValue(extruder_flattened_changes, setting) - - # Get extruder all settings values without user or quality changes - for setting in extruder.getAllKeys(): - settings[f"extruder_{i}"]["all_settings"][setting] = _retrieveValue(extruder, setting) - - return settings diff --git a/cura/PrinterOutput/FormatMaps.py b/cura/PrinterOutput/FormatMaps.py deleted file mode 100644 index b8ad4df2a2..0000000000 --- a/cura/PrinterOutput/FormatMaps.py +++ /dev/null @@ -1,106 +0,0 @@ -# Copyright (c) 2024 UltiMaker -# Cura is released under the terms of the LGPLv3 or higher. - -from UM.Resources import Resources - -import json -from typing import Dict, List, Optional - -class FormatMaps: - - # A map from the printer-type in their native file-formats to the internal name we use. - PRINTER_TYPE_NAME = { - "fire_e": "ultimaker_method", - "lava_f": "ultimaker_methodx", - "magma_10": "ultimaker_methodxl", - "sketch": "ultimaker_sketch" - } - - # A map from the extruder-name in their native file-formats to the internal name we use. - EXTRUDER_NAME_MAP = { - "mk14_hot": "1XA", - "mk14_hot_s": "2XA", - "mk14_c": "1C", - "mk14": "1A", - "mk14_s": "2A", - "mk14_e": "LABS" - } - - # A map from the material-name in their native file-formats to some info, including the internal name we use. - MATERIAL_MAP = { - "abs": {"name": "ABS", "guid": "2780b345-577b-4a24-a2c5-12e6aad3e690"}, - "abs-cf10": {"name": "ABS-CF", "guid": "495a0ce5-9daf-4a16-b7b2-06856d82394d"}, - "abs-wss1": {"name": "ABS-R", "guid": "88c8919c-6a09-471a-b7b6-e801263d862d"}, - "asa": {"name": "ASA", "guid": "f79bc612-21eb-482e-ad6c-87d75bdde066"}, - "nylon12-cf": {"name": "Nylon 12 CF", "guid": "3c6f2877-71cc-4760-84e6-4b89ab243e3b"}, - "nylon": {"name": "Nylon", "guid": "283d439a-3490-4481-920c-c51d8cdecf9c"}, - "pc": {"name": "PC", "guid": "62414577-94d1-490d-b1e4-7ef3ec40db02"}, - "petg": {"name": "PETG", "guid": "69386c85-5b6c-421a-bec5-aeb1fb33f060"}, - "pla": {"name": "PLA", "guid": "abb9c58e-1f56-48d1-bd8f-055fde3a5b56"}, - "pva": {"name": "PVA", "guid": "add51ef2-86eb-4c39-afd5-5586564f0715"}, - "wss1": {"name": "RapidRinse", "guid": "a140ef8f-4f26-4e73-abe0-cfc29d6d1024"}, - "sr30": {"name": "SR-30", "guid": "77873465-83a9-4283-bc44-4e542b8eb3eb"}, - "bvoh": {"name": "BVOH", "guid": "923e604c-8432-4b09-96aa-9bbbd42207f4"}, - "cpe": {"name": "CPE", "guid": "da1872c1-b991-4795-80ad-bdac0f131726"}, - "hips": {"name": "HIPS", "guid": "a468d86a-220c-47eb-99a5-bbb47e514eb0"}, - "tpu": {"name": "TPU 95A", "guid": "19baa6a9-94ff-478b-b4a1-8157b74358d2"}, - "im-pla": {"name": "Tough", "guid": "de031137-a8ca-4a72-bd1b-17bb964033ad"} - } - - __inverse_printer_name: Optional[Dict[str, str]] = None - __inverse_extruder_type: Optional[Dict[str, str]] = None - __inverse_material_map: Optional[Dict[str, str]] = None - __product_to_id_map: Optional[Dict[str, List[str]]] = None - - @classmethod - def getInversePrinterNameMap(cls) -> Dict[str, str]: - """Returns the inverse of the printer name map, that is, from the internal name to the name used in output.""" - if cls.__inverse_printer_name is not None: - return cls.__inverse_printer_name - cls.__inverse_printer_name = {} - for key, value in cls.PRINTER_TYPE_NAME.items(): - cls.__inverse_printer_name[value] = key - return cls.__inverse_printer_name - - @classmethod - def getInverseExtruderTypeMap(cls) -> Dict[str, str]: - """Returns the inverse of the extruder type map, that is, from the internal name to the name used in output.""" - if cls.__inverse_extruder_type is not None: - return cls.__inverse_extruder_type - cls.__inverse_extruder_type = {} - for key, value in cls.EXTRUDER_NAME_MAP.items(): - cls.__inverse_extruder_type[value] = key - return cls.__inverse_extruder_type - - @classmethod - def getInverseMaterialMap(cls) -> Dict[str, str]: - """Returns the inverse of the material map, that is, from the internal name to the name used in output. - - Note that this drops the extra info saved in the non-inverse material map, use that if you need it. - """ - if cls.__inverse_material_map is not None: - return cls.__inverse_material_map - cls.__inverse_material_map = {} - for key, value in cls.MATERIAL_MAP.items(): - cls.__inverse_material_map[value["name"]] = key - return cls.__inverse_material_map - - @classmethod - def getProductIdMap(cls) -> Dict[str, List[str]]: - """Gets a mapping from product names (for example, in the XML files) to their definition IDs. - - This loads the mapping from a file. - """ - if cls.__product_to_id_map is not None: - return cls.__product_to_id_map - - product_to_id_file = Resources.getPath(Resources.Texts, "product_to_id.json") - with open(product_to_id_file, encoding = "utf-8") as f: - contents = "" - for line in f: - contents += line if "#" not in line else "".join([line.replace("#", str(n)) for n in range(1, 12)]) - cls.__product_to_id_map = json.loads(contents) - cls.__product_to_id_map = {key: [value] for key, value in cls.__product_to_id_map.items()} - #This also loads "Ultimaker S5" -> "ultimaker_s5" even though that is not strictly necessary with the default to change spaces into underscores. - #However it is not always loaded with that default; this mapping is also used in serialize() without that default. - return cls.__product_to_id_map diff --git a/cura/PrinterOutput/Models/ExtruderConfigurationModel.py b/cura/PrinterOutput/Models/ExtruderConfigurationModel.py index c5c480e224..ac924c684e 100644 --- a/cura/PrinterOutput/Models/ExtruderConfigurationModel.py +++ b/cura/PrinterOutput/Models/ExtruderConfigurationModel.py @@ -1,10 +1,9 @@ -# Copyright (c) 2024 UltiMaker +# Copyright (c) 2018 Ultimaker B.V. # Cura is released under the terms of the LGPLv3 or higher. from typing import Optional from PyQt6.QtCore import pyqtProperty, QObject, pyqtSignal -from cura.PrinterOutput.FormatMaps import FormatMaps from .MaterialOutputModel import MaterialOutputModel @@ -46,8 +45,16 @@ class ExtruderConfigurationModel(QObject): @staticmethod def applyNameMappingHotend(hotendId) -> str: - if hotendId in FormatMaps.EXTRUDER_NAME_MAP: - return FormatMaps.EXTRUDER_NAME_MAP[hotendId] + _EXTRUDER_NAME_MAP = { + "mk14_hot":"1XA", + "mk14_hot_s":"2XA", + "mk14_c":"1C", + "mk14":"1A", + "mk14_s":"2A", + "mk14_e": "LABS" + } + if hotendId in _EXTRUDER_NAME_MAP: + return _EXTRUDER_NAME_MAP[hotendId] return hotendId @pyqtProperty(str, fset = setHotendID, notify = extruderConfigurationChanged) diff --git a/cura/PrinterOutput/Models/MaterialOutputModel.py b/cura/PrinterOutput/Models/MaterialOutputModel.py index 8790d1626e..854226c6d4 100644 --- a/cura/PrinterOutput/Models/MaterialOutputModel.py +++ b/cura/PrinterOutput/Models/MaterialOutputModel.py @@ -1,10 +1,9 @@ -# Copyright (c) 2024 UltiMaker +# Copyright (c) 2017 Ultimaker B.V. # Cura is released under the terms of the LGPLv3 or higher. from typing import Optional from PyQt6.QtCore import pyqtProperty, QObject -from cura.PrinterOutput.FormatMaps import FormatMaps class MaterialOutputModel(QObject): @@ -24,9 +23,30 @@ class MaterialOutputModel(QObject): @staticmethod def getMaterialFromDefinition(guid, type, brand, name): - if guid is None and brand != "empty" and type in FormatMaps.MATERIAL_MAP: - name = FormatMaps.MATERIAL_MAP[type]["name"] - guid = FormatMaps.MATERIAL_MAP[type]["guid"] + + _MATERIAL_MAP = { "abs" :{"name" :"ABS" ,"guid": "2780b345-577b-4a24-a2c5-12e6aad3e690"}, + "abs-cf10" :{"name": "ABS-CF" ,"guid": "495a0ce5-9daf-4a16-b7b2-06856d82394d"}, + "abs-wss1" :{"name" :"ABS-R" ,"guid": "88c8919c-6a09-471a-b7b6-e801263d862d"}, + "asa" :{"name" :"ASA" ,"guid": "f79bc612-21eb-482e-ad6c-87d75bdde066"}, + "nylon12-cf":{"name": "Nylon 12 CF" ,"guid": "3c6f2877-71cc-4760-84e6-4b89ab243e3b"}, + "nylon" :{"name" :"Nylon" ,"guid": "283d439a-3490-4481-920c-c51d8cdecf9c"}, + "pc" :{"name" :"PC" ,"guid": "62414577-94d1-490d-b1e4-7ef3ec40db02"}, + "petg" :{"name" :"PETG" ,"guid": "69386c85-5b6c-421a-bec5-aeb1fb33f060"}, + "pla" :{"name" :"PLA" ,"guid": "abb9c58e-1f56-48d1-bd8f-055fde3a5b56"}, + "pva" :{"name" :"PVA" ,"guid": "add51ef2-86eb-4c39-afd5-5586564f0715"}, + "wss1" :{"name" :"RapidRinse" ,"guid": "a140ef8f-4f26-4e73-abe0-cfc29d6d1024"}, + "sr30" :{"name" :"SR-30" ,"guid": "77873465-83a9-4283-bc44-4e542b8eb3eb"}, + "bvoh" :{"name" :"BVOH" ,"guid": "923e604c-8432-4b09-96aa-9bbbd42207f4"}, + "cpe" :{"name" :"CPE" ,"guid": "da1872c1-b991-4795-80ad-bdac0f131726"}, + "hips" :{"name" :"HIPS" ,"guid": "a468d86a-220c-47eb-99a5-bbb47e514eb0"}, + "tpu" :{"name" :"TPU 95A" ,"guid": "19baa6a9-94ff-478b-b4a1-8157b74358d2"}, + "im-pla" :{"name": "Tough" ,"guid": "de031137-a8ca-4a72-bd1b-17bb964033ad"} + } + + + if guid is None and brand != "empty" and type in _MATERIAL_MAP: + name = _MATERIAL_MAP[type]["name"] + guid = _MATERIAL_MAP[type]["guid"] return name, guid diff --git a/cura/PrinterOutput/NetworkedPrinterOutputDevice.py b/cura/PrinterOutput/NetworkedPrinterOutputDevice.py index 3dc245d468..2a683966db 100644 --- a/cura/PrinterOutput/NetworkedPrinterOutputDevice.py +++ b/cura/PrinterOutput/NetworkedPrinterOutputDevice.py @@ -1,4 +1,4 @@ -# Copyright (c) 2024 UltiMaker +# Copyright (c) 2021 Ultimaker B.V. # Cura is released under the terms of the LGPLv3 or higher. from UM.FileHandler.FileHandler import FileHandler #For typing. @@ -6,7 +6,6 @@ from UM.Logger import Logger from UM.Scene.SceneNode import SceneNode #For typing. from cura.API import Account from cura.CuraApplication import CuraApplication -from cura.PrinterOutput.FormatMaps import FormatMaps from cura.PrinterOutput.PrinterOutputDevice import PrinterOutputDevice, ConnectionState, ConnectionType @@ -420,8 +419,14 @@ class NetworkedPrinterOutputDevice(PrinterOutputDevice): @staticmethod def applyPrinterTypeMapping(printer_type): - if printer_type in FormatMaps.PRINTER_TYPE_NAME: - return FormatMaps.PRINTER_TYPE_NAME[printer_type] + _PRINTER_TYPE_NAME = { + "fire_e": "ultimaker_method", + "lava_f": "ultimaker_methodx", + "magma_10": "ultimaker_methodxl", + "sketch": "ultimaker_sketch" + } + if printer_type in _PRINTER_TYPE_NAME: + return _PRINTER_TYPE_NAME[printer_type] return printer_type @pyqtProperty(str, constant = True) diff --git a/plugins/3MFWriter/ThreeMFWriter.py b/plugins/3MFWriter/ThreeMFWriter.py index a3eb43ca32..5a9fa487fc 100644 --- a/plugins/3MFWriter/ThreeMFWriter.py +++ b/plugins/3MFWriter/ThreeMFWriter.py @@ -114,24 +114,22 @@ class ThreeMFWriter(MeshWriter): mesh_data = um_node.getMeshData() - node_matrix = um_node.getLocalTransformation() - node_matrix.preMultiply(transformation) - if center_mesh: - center_matrix = Matrix() + node_matrix = Matrix() # compensate for original center position, if object(s) is/are not around its zero position if mesh_data is not None: extents = mesh_data.getExtents() if extents is not None: # We use a different coordinate space while writing, so flip Z and Y - center_vector = Vector(-extents.center.x, -extents.center.y, -extents.center.z) - center_matrix.setByTranslation(center_vector) - node_matrix.preMultiply(center_matrix) + center_vector = Vector(extents.center.x, extents.center.y, extents.center.z) + node_matrix.setByTranslation(center_vector) + node_matrix.multiply(um_node.getLocalTransformation()) + else: + node_matrix = um_node.getLocalTransformation() - matrix_string = ThreeMFWriter._convertMatrixToString(node_matrix) + matrix_string = ThreeMFWriter._convertMatrixToString(node_matrix.preMultiply(transformation)) savitar_node.setTransformation(matrix_string) - if mesh_data is not None: savitar_node.getMeshData().setVerticesFromBytes(mesh_data.getVerticesAsByteArray()) indices_array = mesh_data.getIndicesAsByteArray() diff --git a/plugins/CuraEngineBackend/StartSliceJob.py b/plugins/CuraEngineBackend/StartSliceJob.py index 6da0edb2a7..3da0a68c95 100644 --- a/plugins/CuraEngineBackend/StartSliceJob.py +++ b/plugins/CuraEngineBackend/StartSliceJob.py @@ -366,12 +366,7 @@ class StartSliceJob(Job): for extruder_stack in global_stack.extruderList: self._buildExtruderMessage(extruder_stack) - backend_plugins = CuraApplication.getInstance().getBackendPlugins() - - # Sort backend plugins by name. Not a very good strategy, but at least it is repeatable. This will be improved later. - backend_plugins = sorted(backend_plugins, key=lambda backend_plugin: backend_plugin.getId()) - - for plugin in backend_plugins: + for plugin in CuraApplication.getInstance().getBackendPlugins(): if not plugin.usePlugin(): continue for slot in plugin.getSupportedSlots(): diff --git a/plugins/MakerbotWriter/MakerbotWriter.py b/plugins/MakerbotWriter/MakerbotWriter.py index 34ef562fd3..43595bbf24 100644 --- a/plugins/MakerbotWriter/MakerbotWriter.py +++ b/plugins/MakerbotWriter/MakerbotWriter.py @@ -1,4 +1,4 @@ -# Copyright (c) 2024 UltiMaker +# Copyright (c) 2023 UltiMaker # Cura is released under the terms of the LGPLv3 or higher. from io import StringIO, BufferedIOBase import json @@ -18,7 +18,6 @@ from UM.Scene.Iterator.DepthFirstIterator import DepthFirstIterator from UM.i18n import i18nCatalog from cura.CuraApplication import CuraApplication -from cura.PrinterOutput.FormatMaps import FormatMaps from cura.Snapshot import Snapshot from cura.Utils.Threading import call_on_qt_thread from cura.CuraVersion import ConanInstalls @@ -138,30 +137,6 @@ class MakerbotWriter(MeshWriter): for png_file in png_files: file, data = png_file["file"], png_file["data"] zip_stream.writestr(file, data) - api = CuraApplication.getInstance().getCuraAPI() - metadata_json = api.interface.settings.getSliceMetadata() - - # All the mapping stuff we have to do: - product_to_id_map = FormatMaps.getProductIdMap() - printer_name_map = FormatMaps.getInversePrinterNameMap() - extruder_type_map = FormatMaps.getInverseExtruderTypeMap() - material_map = FormatMaps.getInverseMaterialMap() - for key, value in metadata_json.items(): - if "all_settings" in value: - if "machine_name" in value["all_settings"]: - machine_name = value["all_settings"]["machine_name"] - if machine_name in product_to_id_map: - machine_name = product_to_id_map[machine_name][0] - value["all_settings"]["machine_name"] = printer_name_map.get(machine_name, machine_name) - if "machine_nozzle_id" in value["all_settings"]: - extruder_type = value["all_settings"]["machine_nozzle_id"] - value["all_settings"]["machine_nozzle_id"] = extruder_type_map.get(extruder_type, extruder_type) - if "material_type" in value["all_settings"]: - material_type = value["all_settings"]["material_type"] - value["all_settings"]["material_type"] = material_map.get(material_type, material_type) - - slice_metadata = json.dumps(metadata_json, separators=(", ", ": "), indent=4) - zip_stream.writestr("slicemetadata.json", slice_metadata) except (IOError, OSError, BadZipFile) as ex: Logger.log("e", f"Could not write to (.makerbot) file because: '{ex}'.") self.setInformation(catalog.i18nc("@error", "MakerbotWriter could not save to the designated path.")) diff --git a/plugins/UFPWriter/UFPWriter.py b/plugins/UFPWriter/UFPWriter.py index 0cf756b6a4..475e5fc01a 100644 --- a/plugins/UFPWriter/UFPWriter.py +++ b/plugins/UFPWriter/UFPWriter.py @@ -24,7 +24,6 @@ from UM.Settings.InstanceContainer import InstanceContainer from cura.CuraApplication import CuraApplication from cura.Settings.GlobalStack import GlobalStack from cura.Utils.Threading import call_on_qt_thread -from cura.API import CuraAPI from UM.i18n import i18nCatalog @@ -86,8 +85,7 @@ class UFPWriter(MeshWriter): try: archive.addContentType(extension="json", mime_type="application/json") setting_textio = StringIO() - api = CuraApplication.getInstance().getCuraAPI() - json.dump(api.interface.settings.getSliceMetadata(), setting_textio, separators=(", ", ": "), indent=4) + json.dump(self._getSliceMetadata(), setting_textio, separators=(", ", ": "), indent=4) steam = archive.getStream(SLICE_METADATA_PATH) steam.write(setting_textio.getvalue().encode("UTF-8")) except EnvironmentError as e: @@ -212,3 +210,57 @@ class UFPWriter(MeshWriter): return [{"name": item.getName()} for item in DepthFirstIterator(node) if item.getMeshData() is not None and not item.callDecoration("isNonPrintingMesh")] + + def _getSliceMetadata(self) -> Dict[str, Dict[str, Dict[str, str]]]: + """Get all changed settings and all settings. For each extruder and the global stack""" + print_information = CuraApplication.getInstance().getPrintInformation() + machine_manager = CuraApplication.getInstance().getMachineManager() + settings = { + "material": { + "length": print_information.materialLengths, + "weight": print_information.materialWeights, + "cost": print_information.materialCosts, + }, + "global": { + "changes": {}, + "all_settings": {}, + }, + "quality": asdict(machine_manager.activeQualityDisplayNameMap()), + } + + def _retrieveValue(container: InstanceContainer, setting_: str): + value_ = container.getProperty(setting_, "value") + for _ in range(0, 1024): # Prevent possibly endless loop by not using a limit. + if not isinstance(value_, SettingFunction): + return value_ # Success! + value_ = value_(container) + return 0 # Fallback value after breaking possibly endless loop. + + global_stack = cast(GlobalStack, Application.getInstance().getGlobalContainerStack()) + + # Add global user or quality changes + global_flattened_changes = InstanceContainer.createMergedInstanceContainer(global_stack.userChanges, global_stack.qualityChanges) + for setting in global_flattened_changes.getAllKeys(): + settings["global"]["changes"][setting] = _retrieveValue(global_flattened_changes, setting) + + # Get global all settings values without user or quality changes + for setting in global_stack.getAllKeys(): + settings["global"]["all_settings"][setting] = _retrieveValue(global_stack, setting) + + for i, extruder in enumerate(global_stack.extruderList): + # Add extruder fields to settings dictionary + settings[f"extruder_{i}"] = { + "changes": {}, + "all_settings": {}, + } + + # Add extruder user or quality changes + extruder_flattened_changes = InstanceContainer.createMergedInstanceContainer(extruder.userChanges, extruder.qualityChanges) + for setting in extruder_flattened_changes.getAllKeys(): + settings[f"extruder_{i}"]["changes"][setting] = _retrieveValue(extruder_flattened_changes, setting) + + # Get extruder all settings values without user or quality changes + for setting in extruder.getAllKeys(): + settings[f"extruder_{i}"]["all_settings"][setting] = _retrieveValue(extruder, setting) + + return settings diff --git a/plugins/XmlMaterialProfile/XmlMaterialProfile.py b/plugins/XmlMaterialProfile/XmlMaterialProfile.py index 49b5e7661d..980288e3c9 100644 --- a/plugins/XmlMaterialProfile/XmlMaterialProfile.py +++ b/plugins/XmlMaterialProfile/XmlMaterialProfile.py @@ -17,7 +17,6 @@ from UM.Settings.ContainerRegistry import ContainerRegistry from UM.ConfigurationErrorMessage import ConfigurationErrorMessage from cura.CuraApplication import CuraApplication -from cura.PrinterOutput.FormatMaps import FormatMaps from cura.Machines.VariantType import VariantType try: @@ -250,7 +249,7 @@ class XmlMaterialProfile(InstanceContainer): machine_variant_map[definition_id][variant_name] = variant_dict # Map machine human-readable names to IDs - product_id_map = FormatMaps.getProductIdMap() + product_id_map = self.getProductIdMap() for definition_id, container in machine_container_map.items(): definition_id = container.getMetaDataEntry("definition") @@ -648,7 +647,7 @@ class XmlMaterialProfile(InstanceContainer): self._dirty = False # Map machine human-readable names to IDs - product_id_map = FormatMaps.getProductIdMap() + product_id_map = self.getProductIdMap() machines = data.iterfind("./um:settings/um:machine", self.__namespaces) for machine in machines: @@ -924,7 +923,7 @@ class XmlMaterialProfile(InstanceContainer): result_metadata.append(base_metadata) # Map machine human-readable names to IDs - product_id_map = FormatMaps.getProductIdMap() + product_id_map = cls.getProductIdMap() for machine in data.iterfind("./um:settings/um:machine", cls.__namespaces): machine_compatibility = common_compatibility @@ -1129,6 +1128,29 @@ class XmlMaterialProfile(InstanceContainer): id_list = list(id_list) return id_list + __product_to_id_map: Optional[Dict[str, List[str]]] = None + + @classmethod + def getProductIdMap(cls) -> Dict[str, List[str]]: + """Gets a mapping from product names in the XML files to their definition IDs. + + This loads the mapping from a file. + """ + if cls.__product_to_id_map is not None: + return cls.__product_to_id_map + + plugin_path = cast(str, PluginRegistry.getInstance().getPluginPath("XmlMaterialProfile")) + product_to_id_file = os.path.join(plugin_path, "product_to_id.json") + with open(product_to_id_file, encoding = "utf-8") as f: + contents = "" + for line in f: + contents += line if "#" not in line else "".join([line.replace("#", str(n)) for n in range(1, 12)]) + cls.__product_to_id_map = json.loads(contents) + cls.__product_to_id_map = {key: [value] for key, value in cls.__product_to_id_map.items()} + #This also loads "Ultimaker S5" -> "ultimaker_s5" even though that is not strictly necessary with the default to change spaces into underscores. + #However it is not always loaded with that default; this mapping is also used in serialize() without that default. + return cls.__product_to_id_map + @staticmethod def _parseCompatibleValue(value: str): """Parse the value of the "material compatible" property.""" diff --git a/resources/texts/product_to_id.json b/plugins/XmlMaterialProfile/product_to_id.json similarity index 100% rename from resources/texts/product_to_id.json rename to plugins/XmlMaterialProfile/product_to_id.json diff --git a/resources/definitions/Mark2_for_Ultimaker2.def.json b/resources/definitions/Mark2_for_Ultimaker2.def.json index dab45dd80c..789d5d42ec 100644 --- a/resources/definitions/Mark2_for_Ultimaker2.def.json +++ b/resources/definitions/Mark2_for_Ultimaker2.def.json @@ -130,6 +130,7 @@ "machine_min_cool_heat_time_window": { "default_value": 15.0 }, "machine_name": { "default_value": "Mark2_for_Ultimaker2" }, "machine_nozzle_cool_down_speed": { "default_value": 1.5 }, + "machine_nozzle_head_distance": { "default_value": 5 }, "machine_nozzle_heat_up_speed": { "default_value": 3.5 }, "machine_nozzle_size": { "default_value": 0.4 }, "machine_show_variants": { "default_value": true }, diff --git a/resources/definitions/atom3.def.json b/resources/definitions/atom3.def.json index 6fab25a96d..c9b54d2f89 100644 --- a/resources/definitions/atom3.def.json +++ b/resources/definitions/atom3.def.json @@ -65,6 +65,7 @@ "machine_heated_bed": { "default_value": true }, "machine_height": { "default_value": 340 }, "machine_name": { "default_value": "Atom 3" }, + "machine_nozzle_head_distance": { "default_value": 6 }, "machine_shape": { "default_value": "elliptic" }, "machine_show_variants": { "default_value": true }, "machine_start_gcode": { "default_value": ";MACHINE START CODE\nG21 ;metric values\nG90 ;absolute positioning\nG28 ;home\nG1 Z5 F9000\n;MACHINE START CODE" }, diff --git a/resources/definitions/creality_crm4.def.json b/resources/definitions/creality_crm4.def.json deleted file mode 100644 index 89ab3ed04c..0000000000 --- a/resources/definitions/creality_crm4.def.json +++ /dev/null @@ -1,18 +0,0 @@ -{ - "version": 2, - "name": "Creality CR-M4", - "inherits": "creality_base", - "metadata": - { - "visible": true, - "quality_definition": "creality_base" - }, - "overrides": - { - "gantry_height": { "value": 35 }, - "machine_depth": { "default_value": 450 }, - "machine_height": { "default_value": 470 }, - "machine_name": { "default_value": "Creality CR-M4" }, - "machine_width": { "default_value": 450 } - } -} \ No newline at end of file diff --git a/resources/definitions/diy220.def.json b/resources/definitions/diy220.def.json index ea3e89ab04..f4c2e41364 100644 --- a/resources/definitions/diy220.def.json +++ b/resources/definitions/diy220.def.json @@ -35,6 +35,7 @@ "machine_max_feedrate_y": { "default_value": 300 }, "machine_max_feedrate_z": { "default_value": 40 }, "machine_name": { "default_value": "Diytech 220" }, + "machine_nozzle_head_distance": { "default_value": 3 }, "machine_nozzle_tip_outer_diameter": { "default_value": 1 }, "machine_start_gcode": { "default_value": "G21\nG90\nM82\nM107\nG28\nG1 Z15 F200\nT0\nG92 E0\nG1 E16 F250\nG92 E0\n" }, "machine_use_extruder_offset_to_offset_coords": { "default_value": true }, diff --git a/resources/definitions/dxu.def.json b/resources/definitions/dxu.def.json index 117edf43db..c5eb9720f3 100644 --- a/resources/definitions/dxu.def.json +++ b/resources/definitions/dxu.def.json @@ -122,6 +122,7 @@ "machine_name": { "default_value": "dxu" }, "machine_nozzle_cool_down_speed": { "default_value": 1.5 }, "machine_nozzle_expansion_angle": { "default_value": 45 }, + "machine_nozzle_head_distance": { "default_value": 5 }, "machine_nozzle_heat_up_speed": { "default_value": 3.5 }, "machine_nozzle_size": { "default_value": 0.4 }, "machine_show_variants": { "default_value": true }, diff --git a/resources/definitions/erzay3d.def.json b/resources/definitions/erzay3d.def.json index af5784e4e6..5baadf32e4 100644 --- a/resources/definitions/erzay3d.def.json +++ b/resources/definitions/erzay3d.def.json @@ -44,6 +44,7 @@ "machine_max_jerk_xy": { "default_value": 10 }, "machine_max_jerk_z": { "default_value": 10 }, "machine_name": { "default_value": "Erzay3D" }, + "machine_nozzle_head_distance": { "default_value": 2.5 }, "machine_nozzle_size": { "default_value": 0.4 }, "machine_shape": { "default_value": "elliptic" }, "machine_start_gcode": { "default_value": "G28\nG1 Z15.0 F6000\nG92 E0" }, diff --git a/resources/definitions/fdmextruder.def.json b/resources/definitions/fdmextruder.def.json index 101efee3b1..f60cf63360 100644 --- a/resources/definitions/fdmextruder.def.json +++ b/resources/definitions/fdmextruder.def.json @@ -167,17 +167,6 @@ "type": "float", "unit": "mm" }, - "machine_nozzle_head_distance": - { - "default_value": 3, - "description": "The height difference between the tip of the nozzle and the lowest part of the print head.", - "label": "Nozzle Length", - "settable_per_extruder": true, - "settable_per_mesh": false, - "settable_per_meshgroup": false, - "type": "float", - "unit": "mm" - }, "machine_nozzle_id": { "default_value": "unknown", diff --git a/resources/definitions/fdmprinter.def.json b/resources/definitions/fdmprinter.def.json index c0c90dc6d7..045bec05a4 100644 --- a/resources/definitions/fdmprinter.def.json +++ b/resources/definitions/fdmprinter.def.json @@ -28,18 +28,6 @@ "icon": "Printer", "children": { - "build_volume_fan_nr": - { - "label": "Build volume fan number", - "description": "The number of the fan that cools the build volume. If this is set to 0, it's means that there is no build volume fan", - "default_value": 0, - "minimum_value": "0", - "maximum_value": "999999", - "type": "int", - "settable_per_mesh": false, - "settable_per_extruder": false, - "settable_per_meshgroup": false - }, "machine_name": { "label": "Machine Type", @@ -301,6 +289,17 @@ "settable_per_meshgroup": false, "settable_globally": false }, + "machine_nozzle_head_distance": + { + "label": "Nozzle Length", + "description": "The height difference between the tip of the nozzle and the lowest part of the print head.", + "unit": "mm", + "default_value": 3, + "type": "float", + "settable_per_mesh": false, + "settable_per_extruder": true, + "settable_per_meshgroup": false + }, "machine_nozzle_expansion_angle": { "label": "Nozzle Angle", @@ -4468,37 +4467,6 @@ "settable_per_mesh": false, "settable_per_extruder": true }, - "build_fan_full_at_height": - { - "label": "Build Fan Speed at Height", - "description": "The height at which the fans spin on regular fan speed. At the layers below the fan speed gradually increases from Initial Fan Speed to Regular Fan Speed.", - "unit": "mm", - "type": "float", - "default_value": 0, - "minimum_value": "0", - "enabled": "build_volume_fan_nr != 0", - "maximum_value_warning": "10.0", - "settable_per_mesh": false, - "settable_per_extruder": false, - "settable_per_meshgroup": false, - "children": - { - "build_fan_full_layer": - { - "label": "Build Fan Speed at Layer", - "description": "The layer at which the build fans spin on full fan speed. This value is calculated and rounded to a whole number.", - "type": "int", - "default_value": 0, - "minimum_value": "0", - "enabled": "build_volume_fan_nr != 0", - "maximum_value_warning": "10 / resolveOrValue('layer_height')", - "value": "max(1, int(math.floor((build_fan_full_at_height - resolveOrValue('layer_height_0')) / resolveOrValue('layer_height')) + 2))", - "settable_per_mesh": false, - "settable_per_extruder": false, - "settable_per_meshgroup": false - } - } - }, "cool_fan_speed": { "label": "Fan Speed", diff --git a/resources/definitions/maker_starter.def.json b/resources/definitions/maker_starter.def.json index 5e5f9dcb5b..e654ee0915 100644 --- a/resources/definitions/maker_starter.def.json +++ b/resources/definitions/maker_starter.def.json @@ -27,6 +27,7 @@ "machine_heated_bed": { "default_value": false }, "machine_height": { "default_value": 200 }, "machine_name": { "default_value": "3DMaker Starter" }, + "machine_nozzle_head_distance": { "default_value": 3 }, "machine_nozzle_tip_outer_diameter": { "default_value": 1 }, "machine_width": { "default_value": 210 }, "raft_airgap": { "default_value": 0.2 }, diff --git a/resources/definitions/mendel90.def.json b/resources/definitions/mendel90.def.json index d8619fe276..57e1276e6a 100644 --- a/resources/definitions/mendel90.def.json +++ b/resources/definitions/mendel90.def.json @@ -37,6 +37,7 @@ "machine_heated_bed": { "default_value": true }, "machine_height": { "default_value": 200 }, "machine_name": { "default_value": "Mendel90" }, + "machine_nozzle_head_distance": { "default_value": 5 }, "machine_nozzle_tip_outer_diameter": { "default_value": 1 }, "machine_start_gcode": { "default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;absolute extrusion\nM107 ;start with the fan off\nG28 ;home\nG92 E0 ;zero the extruded length\nM140 S{material_bed_temperature_layer_0} ; set the bed temperature and continue on\nG1 X-50 Y98 F9000 ;go to the left of the top\nG1 Z0.05 ; close to the bed\nM104 S{material_print_temperature_layer_0}; pre-heat the extruder continue on\nM190 S{material_bed_temperature_layer_0} ;set the bed temp & wait\nM109 S{material_print_temperature_layer_0};set the extruder temp for layer 0 & wait\nG92 E0 ;zero the extruded length\nG1 X50 E10 F300 ; make a thick line to prime extruder\nG92 E0 ; reset extruder\nG1 E-4 F1800\nG1 Z0.3 ;lift Z\n" }, "machine_width": { "default_value": 200 }, diff --git a/resources/definitions/structur3d_discov3ry1_complete_um2plus.def.json b/resources/definitions/structur3d_discov3ry1_complete_um2plus.def.json index 722f4dade5..c013c49e05 100644 --- a/resources/definitions/structur3d_discov3ry1_complete_um2plus.def.json +++ b/resources/definitions/structur3d_discov3ry1_complete_um2plus.def.json @@ -78,6 +78,7 @@ "machine_heat_zone_length": { "default_value": 20 }, "machine_height": { "default_value": 205 }, "machine_name": { "default_value": "Discov3ry Complete (Ultimaker 2+)" }, + "machine_nozzle_head_distance": { "default_value": 5 }, "machine_show_variants": { "default_value": true }, "machine_start_gcode": { "default_value": "\n;Updated Firmware (.hex and Marlin .ino) for \n;Ultimaker 2+ with Discov3ry Extruder available at: \n;https://github.com/Structur3d/UM2.1Discov3ry-Firmware-beta \n;**Learn more at https://www.structur3d.io** \n \nM104 S{material_print_temperature} ;Start heating extruder \nM140 S{material_bed_temperature} ;Start heating bed \nG21 ;metric values \nG90 ;absolute positioning \nM82 ;set extruder to absolute mode \nM107 ;start with the fan off \nM302 ;allow cold extrusion \nM92 E2589 ;set extruder EEPROM steps/mm for paste \nG28 Z0 ;move Z to bottom endstops \nG28 X0 Y0 ;move X/Y to endstops \nG1 X15 Y0 F4000 ;move X/Y to front of printer \nG1 Z15.0 F9000 ;move the platform to 15mm \nG92 E0 ;zero the extruded length \nG1 F200 E10 ;extrude 10 mm of feed stock \nG92 E0 ;zero the extruded length again \nG1 F9000 \n;Put printing message on LCD screen \nM117 Printing..." }, "machine_width": { "default_value": 205 }, diff --git a/resources/definitions/tam.def.json b/resources/definitions/tam.def.json index 01437cebe7..84bbc9c8fb 100644 --- a/resources/definitions/tam.def.json +++ b/resources/definitions/tam.def.json @@ -44,6 +44,7 @@ "machine_max_acceleration_y": { "default_value": 6000 }, "machine_max_acceleration_z": { "default_value": 12000 }, "machine_name": { "default_value": "TypeAMachines" }, + "machine_nozzle_head_distance": { "default_value": 3 }, "machine_nozzle_tip_outer_diameter": { "default_value": 1 }, "machine_start_gcode": { "default_value": ";-- START GCODE --\n;Sliced for Type A Machines Series 1\n;Sliced at: {day} {date} {time}\n;Basic settings:\n;Layer height: {layer_height}\n;Walls: {wall_thickness}\n;Fill: {fill_distance}\n;Print Speed: {print_speed}\n;Support: {support}\n;Retraction Speed: {retraction_speed}\n;Retraction Distance: {retraction_amount}\n;Print time: {print_time}\n;Filament used: {filament_amount}m {filament_weight}g\n;Settings based on: {material_profile}\nG21 ;metric values\nG90 ;absolute positioning\nG28 ;move to endstops\nG29 ;allows for auto-levelling\nG1 Z15.0 F12000 ;move the platform down 15mm\nG1 X150 Y5 F9000 ;center\nM140 S{material_bed_temperature} ;Prep Heat Bed\nM109 S{default_material_print_temperature} ;Heat To temp\nM190 S{material_bed_temperature} ;Heat Bed to temp\nG1 X150 Y5 Z0.3 ;move the platform to purge extrusion\nG92 E0 ;zero the extruded length\nG1 F200 X250 E30 ;extrude 30mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 X150 Y150 Z25 F12000 ;recenter and begin\nG1 F9000" }, "machine_use_extruder_offset_to_offset_coords": { "default_value": true }, diff --git a/resources/definitions/ultimaker2.def.json b/resources/definitions/ultimaker2.def.json index d749c96a00..8c0e066cd1 100644 --- a/resources/definitions/ultimaker2.def.json +++ b/resources/definitions/ultimaker2.def.json @@ -95,6 +95,7 @@ "machine_max_feedrate_y": { "default_value": 300 }, "machine_max_feedrate_z": { "default_value": 40 }, "machine_name": { "default_value": "Ultimaker 2" }, + "machine_nozzle_head_distance": { "default_value": 3 }, "machine_nozzle_tip_outer_diameter": { "default_value": 1 }, "machine_start_gcode": { "value": "\"G0 F3000 Y50 ;avoid prime blob\" if machine_gcode_flavor == \"UltiGCode\" else \"G21 ;metric values\\nG90 ;absolute positioning\\nM82 ;set extruder to absolute mode\\nM107 ;start with the fan off\\nG28 Z0 ;move Z to bottom endstops\\nG28 X0 Y0 ;move X/Y to endstops\\nG1 X15 Y0 F4000 ;move X/Y to front of printer\\nG1 Z15.0 F9000 ;move the platform to 15mm\\nG92 E0 ;zero the extruded length\\nG1 F200 E10 ;extrude 10 mm of feed stock\\nG92 E0 ;zero the extruded length again\\nG1 Y50 F9000\\n;Put printing message on LCD screen\\nM117 Printing...\"" }, "machine_use_extruder_offset_to_offset_coords": { "default_value": true }, diff --git a/resources/definitions/ultimaker2_plus.def.json b/resources/definitions/ultimaker2_plus.def.json index c06d8b1e68..b5ad30bb8d 100644 --- a/resources/definitions/ultimaker2_plus.def.json +++ b/resources/definitions/ultimaker2_plus.def.json @@ -83,6 +83,7 @@ "machine_heat_zone_length": { "default_value": 20 }, "machine_height": { "default_value": 205 }, "machine_name": { "default_value": "Ultimaker 2+" }, + "machine_nozzle_head_distance": { "default_value": 5 }, "machine_show_variants": { "default_value": true }, "speed_infill": { "value": "speed_print" }, "speed_support": { "value": "speed_wall_0" }, diff --git a/resources/definitions/ultimaker2_plus_connect.def.json b/resources/definitions/ultimaker2_plus_connect.def.json index 6cdd3e9705..8aae2d4c19 100644 --- a/resources/definitions/ultimaker2_plus_connect.def.json +++ b/resources/definitions/ultimaker2_plus_connect.def.json @@ -92,6 +92,7 @@ "machine_heat_zone_length": { "default_value": 20 }, "machine_height": { "default_value": 205 }, "machine_name": { "default_value": "Ultimaker 2+ Connect" }, + "machine_nozzle_head_distance": { "default_value": 5 }, "machine_show_variants": { "default_value": true }, "machine_start_gcode": { "value": "''" }, "machine_width": { "default_value": 223 }, diff --git a/resources/extruders/Mark2_extruder1.def.json b/resources/extruders/Mark2_extruder1.def.json index 9617678f7e..89992ad450 100644 --- a/resources/extruders/Mark2_extruder1.def.json +++ b/resources/extruders/Mark2_extruder1.def.json @@ -14,7 +14,6 @@ "default_value": 0, "maximum_value": "1" }, - "machine_nozzle_head_distance": { "default_value": 5 }, "machine_nozzle_offset_x": { "default_value": 0.0 }, "machine_nozzle_offset_y": { "default_value": 0.0 } } diff --git a/resources/extruders/Mark2_extruder2.def.json b/resources/extruders/Mark2_extruder2.def.json index b0ea604fbb..967e32d8b8 100644 --- a/resources/extruders/Mark2_extruder2.def.json +++ b/resources/extruders/Mark2_extruder2.def.json @@ -14,7 +14,6 @@ "default_value": 1, "maximum_value": "1" }, - "machine_nozzle_head_distance": { "default_value": 5 }, "machine_nozzle_offset_x": { "default_value": 0.0 }, "machine_nozzle_offset_y": { "default_value": 0.0 } } diff --git a/resources/extruders/atom3_extruder_0.def.json b/resources/extruders/atom3_extruder_0.def.json index fc51a8cf03..ccc7a0bd6b 100644 --- a/resources/extruders/atom3_extruder_0.def.json +++ b/resources/extruders/atom3_extruder_0.def.json @@ -10,7 +10,6 @@ "overrides": { "extruder_nr": { "default_value": 0 }, - "machine_nozzle_head_distance": { "default_value": 6 }, "machine_nozzle_size": { "default_value": 0.4 }, "material_diameter": { "default_value": 1.75 } } diff --git a/resources/extruders/diy220_extruder_0.def.json b/resources/extruders/diy220_extruder_0.def.json index ab271d1006..4d802b4a8d 100644 --- a/resources/extruders/diy220_extruder_0.def.json +++ b/resources/extruders/diy220_extruder_0.def.json @@ -10,7 +10,6 @@ "overrides": { "extruder_nr": { "default_value": 0 }, - "machine_nozzle_head_distance": { "default_value": 3 }, "machine_nozzle_size": { "default_value": 0.4 }, "material_diameter": { "default_value": 1.75 } } diff --git a/resources/extruders/dxu_extruder1.def.json b/resources/extruders/dxu_extruder1.def.json index b44f79fdac..de974b8174 100644 --- a/resources/extruders/dxu_extruder1.def.json +++ b/resources/extruders/dxu_extruder1.def.json @@ -14,7 +14,6 @@ "default_value": 0, "maximum_value": "1" }, - "machine_nozzle_head_distance": { "default_value": 5 }, "machine_nozzle_offset_x": { "default_value": 0.0 }, "machine_nozzle_offset_y": { "default_value": 0.0 }, "machine_nozzle_size": { "default_value": 0.4 }, diff --git a/resources/extruders/dxu_extruder2.def.json b/resources/extruders/dxu_extruder2.def.json index 358bc69dae..b4de471289 100644 --- a/resources/extruders/dxu_extruder2.def.json +++ b/resources/extruders/dxu_extruder2.def.json @@ -14,7 +14,6 @@ "default_value": 1, "maximum_value": "1" }, - "machine_nozzle_head_distance": { "default_value": 5 }, "machine_nozzle_offset_x": { "default_value": 19.0 }, "machine_nozzle_offset_y": { "default_value": 0.0 }, "machine_nozzle_size": { "default_value": 0.4 }, diff --git a/resources/extruders/erzay3d_extruder_0.def.json b/resources/extruders/erzay3d_extruder_0.def.json index 8ba6c573f3..a4082a6224 100644 --- a/resources/extruders/erzay3d_extruder_0.def.json +++ b/resources/extruders/erzay3d_extruder_0.def.json @@ -10,7 +10,6 @@ "overrides": { "extruder_nr": { "default_value": 0 }, - "machine_nozzle_head_distance": { "default_value": 2.5 }, "machine_nozzle_size": { "default_value": 0.4 }, "material_diameter": { "default_value": 1.75 } } diff --git a/resources/extruders/maker_starter_extruder_0.def.json b/resources/extruders/maker_starter_extruder_0.def.json index 4154b00862..1a8877f8ef 100644 --- a/resources/extruders/maker_starter_extruder_0.def.json +++ b/resources/extruders/maker_starter_extruder_0.def.json @@ -10,7 +10,6 @@ "overrides": { "extruder_nr": { "default_value": 0 }, - "machine_nozzle_head_distance": { "default_value": 3 }, "machine_nozzle_size": { "default_value": 0.4 }, "material_diameter": { "default_value": 1.75 } } diff --git a/resources/extruders/mendel90_extruder_0.def.json b/resources/extruders/mendel90_extruder_0.def.json index b04e2d2fe9..0701164a65 100644 --- a/resources/extruders/mendel90_extruder_0.def.json +++ b/resources/extruders/mendel90_extruder_0.def.json @@ -10,7 +10,6 @@ "overrides": { "extruder_nr": { "default_value": 0 }, - "machine_nozzle_head_distance": { "default_value": 5 }, "machine_nozzle_size": { "default_value": 0.4 }, "material_diameter": { "default_value": 1.75 } } diff --git a/resources/extruders/structur3d_discov3ry1_complete_um2plus_extruder_0.def.json b/resources/extruders/structur3d_discov3ry1_complete_um2plus_extruder_0.def.json index ec25298a5c..0258f9da9c 100644 --- a/resources/extruders/structur3d_discov3ry1_complete_um2plus_extruder_0.def.json +++ b/resources/extruders/structur3d_discov3ry1_complete_um2plus_extruder_0.def.json @@ -10,7 +10,6 @@ "overrides": { "extruder_nr": { "default_value": 0 }, - "machine_nozzle_head_distance": { "default_value": 5 }, "machine_nozzle_size": { "default_value": 0.84 }, "material_diameter": { "default_value": 3.175 } } diff --git a/resources/extruders/tam_extruder_0.def.json b/resources/extruders/tam_extruder_0.def.json index 4e5cbe4216..b606474ff0 100644 --- a/resources/extruders/tam_extruder_0.def.json +++ b/resources/extruders/tam_extruder_0.def.json @@ -10,7 +10,6 @@ "overrides": { "extruder_nr": { "default_value": 0 }, - "machine_nozzle_head_distance": { "default_value": 3 }, "machine_nozzle_size": { "default_value": 0.4 }, "material_diameter": { "default_value": 1.75 } } diff --git a/resources/extruders/ultimaker2_extruder_0.def.json b/resources/extruders/ultimaker2_extruder_0.def.json index 3432ace596..17d0d425df 100644 --- a/resources/extruders/ultimaker2_extruder_0.def.json +++ b/resources/extruders/ultimaker2_extruder_0.def.json @@ -10,7 +10,6 @@ "overrides": { "extruder_nr": { "default_value": 0 }, - "machine_nozzle_head_distance": { "default_value": 3 }, "machine_nozzle_size": { "default_value": 0.4 }, "material_diameter": { "default_value": 2.85 } } diff --git a/resources/extruders/ultimaker2_plus_connect_extruder_0.def.json b/resources/extruders/ultimaker2_plus_connect_extruder_0.def.json index 9ad61af313..0b74aae019 100644 --- a/resources/extruders/ultimaker2_plus_connect_extruder_0.def.json +++ b/resources/extruders/ultimaker2_plus_connect_extruder_0.def.json @@ -10,7 +10,6 @@ "overrides": { "extruder_nr": { "default_value": 0 }, - "machine_nozzle_head_distance": { "default_value": 5 }, "machine_nozzle_size": { "default_value": 0.4 }, "material_diameter": { "default_value": 2.85 } } diff --git a/resources/extruders/ultimaker2_plus_extruder_0.def.json b/resources/extruders/ultimaker2_plus_extruder_0.def.json index ace4b5b813..3fec85805e 100644 --- a/resources/extruders/ultimaker2_plus_extruder_0.def.json +++ b/resources/extruders/ultimaker2_plus_extruder_0.def.json @@ -10,7 +10,6 @@ "overrides": { "extruder_nr": { "default_value": 0 }, - "machine_nozzle_head_distance": { "default_value": 5 }, "machine_nozzle_size": { "default_value": 0.4 }, "material_diameter": { "default_value": 2.85 } } diff --git a/resources/i18n/cura.pot b/resources/i18n/cura.pot index 24a5221f4f..8bf8688e0e 100644 --- a/resources/i18n/cura.pot +++ b/resources/i18n/cura.pot @@ -215,14 +215,14 @@ msgstr "" msgctxt "@label crash message" msgid "" -"

A fatal error has occurred in Cura. Please send us this Crash Report to fix the problem

\n" +"

A fatal error has occurred in Cura. Please send us this Crash Report to fix the problem

\n" "

Please use the \"Send report\" button to post a bug report automatically to our servers

\n" " " msgstr "" msgctxt "@label crash message" msgid "" -"

Oops, UltiMaker Cura has encountered something that doesn't seem right.

\n" +"

Oops, UltiMaker Cura has encountered something that doesn't seem right.

\n" "

We encountered an unrecoverable error during start up. It was possibly caused by some incorrect configuration files. We suggest to backup and reset your configuration.

\n" "

Backups can be found in the configuration folder.

\n" "

Please send us this Crash Report to fix the problem.

\n" From 4064dddacc2c48c8152c377c6a387dd67739e7c2 Mon Sep 17 00:00:00 2001 From: Frederic Meeuwissen <13856291+Frederic98@users.noreply.github.com> Date: Mon, 26 Aug 2024 13:12:03 +0200 Subject: [PATCH 2/7] Only convert to yes/no if value is a boolean --- plugins/XmlMaterialProfile/XmlMaterialProfile.py | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/plugins/XmlMaterialProfile/XmlMaterialProfile.py b/plugins/XmlMaterialProfile/XmlMaterialProfile.py index 980288e3c9..d054f05485 100644 --- a/plugins/XmlMaterialProfile/XmlMaterialProfile.py +++ b/plugins/XmlMaterialProfile/XmlMaterialProfile.py @@ -1083,9 +1083,8 @@ class XmlMaterialProfile(InstanceContainer): # Skip material properties (eg diameter) or metadata (eg GUID) return - truth_map = { True: "yes", False: "no" } - if tag_name != "cura:setting" and instance.value in truth_map: - data = truth_map[instance.value] + if tag_name != "cura:setting" and isinstance(instance.value, bool): + data = "yes" if instance.value else "no" else: data = str(instance.value) From 8e05bb49e183024cd08fe70d052b702d2f34f8c2 Mon Sep 17 00:00:00 2001 From: THeijmans Date: Wed, 21 Aug 2024 13:25:30 +0200 Subject: [PATCH 3/7] PP-514 Improve PVA printing quality and reliability on Factor 4 --- .../um_f4_bb0.4_pva_0.15mm.inst.cfg | 16 ++++++++++++++-- .../um_f4_bb0.4_pva_0.1mm.inst.cfg | 17 ++++++++++++++--- .../um_f4_bb0.4_pva_0.2mm.inst.cfg | 17 ++++++++++++++--- .../um_f4_bb0.4_pva_0.3mm.inst.cfg | 17 ++++++++++++++--- .../um_f4_bb0.8_pva_0.2mm.inst.cfg | 16 ++++++++++++++-- .../um_f4_bb0.8_pva_0.3mm.inst.cfg | 16 ++++++++++++++-- .../um_f4_bb0.8_pva_0.4mm.inst.cfg | 16 ++++++++++++++-- 7 files changed, 98 insertions(+), 17 deletions(-) diff --git a/resources/quality/ultimaker_factor4/um_f4_bb0.4_pva_0.15mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_bb0.4_pva_0.15mm.inst.cfg index bae4a519f3..380ea30c1e 100644 --- a/resources/quality/ultimaker_factor4/um_f4_bb0.4_pva_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_factor4/um_f4_bb0.4_pva_0.15mm.inst.cfg @@ -15,17 +15,29 @@ weight = -1 _plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.1 _plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True _plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +acceleration_print = 1000.0 acceleration_support_bottom = 100 -acceleration_support_interface = 1500 +acceleration_support_interface = 1000 brim_replaces_support = False build_volume_temperature = =40 if extruders_enabled_count > 1 else 35 default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60 -initial_layer_line_width_factor = 150 +gradual_support_infill_steps = 0 +initial_layer_line_width_factor = 125 +jerk_print = 10 +material_flow_layer_0 = 90 minimum_support_area = 4 +prime_tower_flow = 90 prime_tower_min_volume = 15 +retraction_min_travel = 5.0 +retraction_prime_speed = 10.0 skin_material_flow = =material_flow * 0.93 +speed_print = 30 +support_angle = 45 +support_infill_rate = 20 support_infill_sparse_thickness = =min(layer_height * 2, machine_nozzle_size * 3 / 4) if layer_height <= 0.15 / 0.4 * machine_nozzle_size else layer_height support_interface_offset = 1 support_offset = 3 +support_xy_distance = 2 support_z_distance = 0 +switch_extruder_prime_speed = 10.0 diff --git a/resources/quality/ultimaker_factor4/um_f4_bb0.4_pva_0.1mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_bb0.4_pva_0.1mm.inst.cfg index 95b7c1856d..4123824c43 100644 --- a/resources/quality/ultimaker_factor4/um_f4_bb0.4_pva_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_factor4/um_f4_bb0.4_pva_0.1mm.inst.cfg @@ -15,18 +15,29 @@ weight = 0 _plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.1 _plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True _plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +acceleration_print = 1000.0 acceleration_support_bottom = 100 -acceleration_support_interface = 1500 +acceleration_support_interface = 1000 brim_replaces_support = False build_volume_temperature = =40 if extruders_enabled_count > 1 else 35 default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60 -initial_layer_line_width_factor = 150 +gradual_support_infill_steps = 0 +initial_layer_line_width_factor = 125 +jerk_print = 10 +material_flow_layer_0 = 90 minimum_support_area = 4 +prime_tower_flow = 90 prime_tower_min_volume = 15 +retraction_min_travel = 5.0 +retraction_prime_speed = 10.0 skin_material_flow = =material_flow * 0.93 -speed_print = 50 +speed_print = 30 +support_angle = 45 +support_infill_rate = 20 support_infill_sparse_thickness = =min(layer_height * 2, machine_nozzle_size * 3 / 4) if layer_height <= 0.15 / 0.4 * machine_nozzle_size else layer_height support_interface_offset = 1 support_offset = 3 +support_xy_distance = 2 support_z_distance = 0 +switch_extruder_prime_speed = 10.0 diff --git a/resources/quality/ultimaker_factor4/um_f4_bb0.4_pva_0.2mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_bb0.4_pva_0.2mm.inst.cfg index 8de45aa01b..f6cd7f65a7 100644 --- a/resources/quality/ultimaker_factor4/um_f4_bb0.4_pva_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_factor4/um_f4_bb0.4_pva_0.2mm.inst.cfg @@ -15,18 +15,29 @@ weight = -2 _plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.1 _plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True _plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +acceleration_print = 1000.0 acceleration_support_bottom = 100 -acceleration_support_interface = 1500 +acceleration_support_interface = 1000 brim_replaces_support = False build_volume_temperature = =40 if extruders_enabled_count > 1 else 35 default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60 -initial_layer_line_width_factor = 150 +gradual_support_infill_steps = 0 +initial_layer_line_width_factor = 125 +jerk_print = 10 +material_flow_layer_0 = 90 minimum_support_area = 4 +prime_tower_flow = 90 prime_tower_min_volume = 15 +retraction_min_travel = 5.0 +retraction_prime_speed = 10.0 skin_material_flow = =material_flow * 0.93 -speed_print = 50 +speed_print = 30 +support_angle = 45 +support_infill_rate = 20 support_infill_sparse_thickness = =min(layer_height * 2, machine_nozzle_size * 3 / 4) if layer_height <= 0.15 / 0.4 * machine_nozzle_size else layer_height support_interface_offset = 1 support_offset = 3 +support_xy_distance = 2 support_z_distance = 0 +switch_extruder_prime_speed = 10.0 diff --git a/resources/quality/ultimaker_factor4/um_f4_bb0.4_pva_0.3mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_bb0.4_pva_0.3mm.inst.cfg index be24017486..69f33c5232 100644 --- a/resources/quality/ultimaker_factor4/um_f4_bb0.4_pva_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_factor4/um_f4_bb0.4_pva_0.3mm.inst.cfg @@ -15,18 +15,29 @@ weight = -3 _plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.1 _plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True _plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +acceleration_print = 1000.0 acceleration_support_bottom = 100 -acceleration_support_interface = 1500 +acceleration_support_interface = 1000 brim_replaces_support = False build_volume_temperature = =40 if extruders_enabled_count > 1 else 35 default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60 -initial_layer_line_width_factor = 150 +gradual_support_infill_steps = 0 +initial_layer_line_width_factor = 125 +jerk_print = 10 +material_flow_layer_0 = 90 minimum_support_area = 4 +prime_tower_flow = 90 prime_tower_min_volume = 15 +retraction_min_travel = 5.0 +retraction_prime_speed = 10.0 skin_material_flow = =material_flow * 0.93 -speed_print = 40 +speed_print = 30 +support_angle = 45 +support_infill_rate = 20 support_infill_sparse_thickness = =min(layer_height * 2, machine_nozzle_size * 3 / 4) if layer_height <= 0.15 / 0.4 * machine_nozzle_size else layer_height support_interface_offset = 1 support_offset = 3 +support_xy_distance = 2 support_z_distance = 0 +switch_extruder_prime_speed = 10.0 diff --git a/resources/quality/ultimaker_factor4/um_f4_bb0.8_pva_0.2mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_bb0.8_pva_0.2mm.inst.cfg index 1e1ab101f4..f5241e08e7 100644 --- a/resources/quality/ultimaker_factor4/um_f4_bb0.8_pva_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_factor4/um_f4_bb0.8_pva_0.2mm.inst.cfg @@ -15,17 +15,29 @@ weight = -2 _plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.1 _plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True _plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +acceleration_print = 1000.0 acceleration_support_bottom = 100 -acceleration_support_interface = 1500 +acceleration_support_interface = 1000 brim_replaces_support = False build_volume_temperature = =40 if extruders_enabled_count > 1 else 35 default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60 -initial_layer_line_width_factor = 150 +gradual_support_infill_steps = 0 +initial_layer_line_width_factor = 125 +jerk_print = 10 +material_flow_layer_0 = 90 minimum_support_area = 4 +prime_tower_flow = 90 prime_tower_min_volume = 15 +retraction_min_travel = 5.0 +retraction_prime_speed = 10.0 skin_material_flow = =material_flow * 0.93 +speed_print = 30 +support_angle = 45 +support_infill_rate = 20 support_infill_sparse_thickness = =min(layer_height * 2, machine_nozzle_size * 3 / 4) if layer_height <= 0.15 / 0.4 * machine_nozzle_size else layer_height support_interface_offset = 1 support_offset = 3 +support_xy_distance = 2 support_z_distance = 0 +switch_extruder_prime_speed = 10.0 diff --git a/resources/quality/ultimaker_factor4/um_f4_bb0.8_pva_0.3mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_bb0.8_pva_0.3mm.inst.cfg index 2ae11eb441..e226d1737f 100644 --- a/resources/quality/ultimaker_factor4/um_f4_bb0.8_pva_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_factor4/um_f4_bb0.8_pva_0.3mm.inst.cfg @@ -15,17 +15,29 @@ weight = -3 _plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.1 _plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True _plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +acceleration_print = 1000.0 acceleration_support_bottom = 100 -acceleration_support_interface = 1500 +acceleration_support_interface = 1000 brim_replaces_support = False build_volume_temperature = =40 if extruders_enabled_count > 1 else 35 default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60 -initial_layer_line_width_factor = 150 +gradual_support_infill_steps = 0 +initial_layer_line_width_factor = 125 +jerk_print = 10 +material_flow_layer_0 = 90 minimum_support_area = 4 +prime_tower_flow = 90 prime_tower_min_volume = 15 +retraction_min_travel = 5.0 +retraction_prime_speed = 10.0 skin_material_flow = =material_flow * 0.93 +speed_print = 30 +support_angle = 45 +support_infill_rate = 20 support_infill_sparse_thickness = =min(layer_height * 2, machine_nozzle_size * 3 / 4) if layer_height <= 0.15 / 0.4 * machine_nozzle_size else layer_height support_interface_offset = 1 support_offset = 3 +support_xy_distance = 2 support_z_distance = 0 +switch_extruder_prime_speed = 10.0 diff --git a/resources/quality/ultimaker_factor4/um_f4_bb0.8_pva_0.4mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_bb0.8_pva_0.4mm.inst.cfg index 448152ca8e..d6b9e95ace 100644 --- a/resources/quality/ultimaker_factor4/um_f4_bb0.8_pva_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_factor4/um_f4_bb0.8_pva_0.4mm.inst.cfg @@ -15,17 +15,29 @@ weight = -4 _plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.1 _plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True _plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +acceleration_print = 1000.0 acceleration_support_bottom = 100 -acceleration_support_interface = 1500 +acceleration_support_interface = 1000 brim_replaces_support = False build_volume_temperature = =40 if extruders_enabled_count > 1 else 35 default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60 -initial_layer_line_width_factor = 150 +gradual_support_infill_steps = 0 +initial_layer_line_width_factor = 125 +jerk_print = 10 +material_flow_layer_0 = 90 minimum_support_area = 4 +prime_tower_flow = 90 prime_tower_min_volume = 15 +retraction_min_travel = 5.0 +retraction_prime_speed = 10.0 skin_material_flow = =material_flow * 0.93 +speed_print = 30 +support_angle = 45 +support_infill_rate = 20 support_infill_sparse_thickness = =min(layer_height * 2, machine_nozzle_size * 3 / 4) if layer_height <= 0.15 / 0.4 * machine_nozzle_size else layer_height support_interface_offset = 1 support_offset = 3 +support_xy_distance = 2 support_z_distance = 0 +switch_extruder_prime_speed = 10.0 From dc2a6cb8bf89e135039513514be59db27ef866cf Mon Sep 17 00:00:00 2001 From: HellAholic Date: Wed, 28 Aug 2024 14:58:08 +0200 Subject: [PATCH 4/7] TPU changes --- .../um_f4_aa0.8_tpu_0.3mm.inst.cfg | 26 +++++++++++++++++++ ...nst.cfg => um_f4_aa0.8_tpu_0.4mm.inst.cfg} | 10 ++++--- .../um_f4_global_Verydraft_Quality.inst.cfg | 2 +- 3 files changed, 33 insertions(+), 5 deletions(-) create mode 100644 resources/quality/ultimaker_factor4/um_f4_aa0.8_tpu_0.3mm.inst.cfg rename resources/quality/ultimaker_factor4/{um_f4_aa0.8_tpu_0.2mm.inst.cfg => um_f4_aa0.8_tpu_0.4mm.inst.cfg} (77%) diff --git a/resources/quality/ultimaker_factor4/um_f4_aa0.8_tpu_0.3mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_aa0.8_tpu_0.3mm.inst.cfg new file mode 100644 index 0000000000..faca58aaa3 --- /dev/null +++ b/resources/quality/ultimaker_factor4/um_f4_aa0.8_tpu_0.3mm.inst.cfg @@ -0,0 +1,26 @@ +[general] +definition = ultimaker_factor4 +name = Extra Fast +version = 4 + +[metadata] +material = generic_tpu +quality_type = verydraft +setting_version = 23 +type = quality +variant = AA 0.8 +weight = -3 + +[values] +_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.1 +_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True +_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +infill_pattern = ='zigzag' if infill_sparse_density > 50 else 'cross_3d' +infill_sparse_density = 20 +inset_direction = outside_in +material_print_temperature = =default_material_print_temperature + 5 +skin_material_flow = =material_flow * 0.9 +skin_material_flow_layer_0 = 90 +speed_layer_0 = 20 +speed_print = 35 + diff --git a/resources/quality/ultimaker_factor4/um_f4_aa0.8_tpu_0.2mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_aa0.8_tpu_0.4mm.inst.cfg similarity index 77% rename from resources/quality/ultimaker_factor4/um_f4_aa0.8_tpu_0.2mm.inst.cfg rename to resources/quality/ultimaker_factor4/um_f4_aa0.8_tpu_0.4mm.inst.cfg index 7db0c220f4..81dacccf6f 100644 --- a/resources/quality/ultimaker_factor4/um_f4_aa0.8_tpu_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_factor4/um_f4_aa0.8_tpu_0.4mm.inst.cfg @@ -1,24 +1,26 @@ [general] definition = ultimaker_factor4 -name = Fast +name = Sprint version = 4 [metadata] material = generic_tpu -quality_type = draft +quality_type = superdraft setting_version = 23 type = quality variant = AA 0.8 -weight = -2 +weight = -4 [values] _plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.1 _plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True _plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 infill_pattern = ='zigzag' if infill_sparse_density > 50 else 'cross_3d' -infill_sparse_density = 10 +infill_sparse_density = 20 inset_direction = outside_in +material_print_temperature = =default_material_print_temperature + 8 skin_material_flow = =material_flow * 0.9 skin_material_flow_layer_0 = 90 speed_layer_0 = 20 +speed_print = 35 diff --git a/resources/quality/ultimaker_factor4/um_f4_global_Verydraft_Quality.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_global_Verydraft_Quality.inst.cfg index 6aa1be79a3..48feef8723 100644 --- a/resources/quality/ultimaker_factor4/um_f4_global_Verydraft_Quality.inst.cfg +++ b/resources/quality/ultimaker_factor4/um_f4_global_Verydraft_Quality.inst.cfg @@ -1,6 +1,6 @@ [general] definition = ultimaker_factor4 -name = Sprint +name = Extra Fast version = 4 [metadata] From c7a286b33a1ca090fb2131399083a5449442b587 Mon Sep 17 00:00:00 2001 From: HellAholic Date: Wed, 28 Aug 2024 13:16:33 +0000 Subject: [PATCH 5/7] Set conan package version 5.8.1 --- conandata.yml | 14 +++++++------- resources/conandata.yml | 2 +- 2 files changed, 8 insertions(+), 8 deletions(-) diff --git a/conandata.yml b/conandata.yml index 83bfd935a0..5a99882ab1 100644 --- a/conandata.yml +++ b/conandata.yml @@ -1,17 +1,17 @@ -version: "5.8.0" +version: "5.8.1" requirements: - - "cura_resources/5.8.0" - - "uranium/5.8.0" - - "curaengine/5.8.0" - - "cura_binary_data/5.8.0" - - "fdm_materials/5.8.0" + - "cura_resources/5.8.1" + - "uranium/5.8.1" + - "curaengine/5.8.1" + - "cura_binary_data/5.8.1" + - "fdm_materials/5.8.1" - "curaengine_plugin_gradual_flow/0.1.0-beta.4" - "dulcificum/0.2.1" - "pysavitar/5.3.0" - "pynest2d/5.3.0" - "native_cad_plugin/2.0.0" requirements_internal: - - "fdm_materials/5.8.0" + - "fdm_materials/5.8.1" - "cura_private_data/(latest)@internal/testing" urls: default: diff --git a/resources/conandata.yml b/resources/conandata.yml index d43b7d4dd2..7d5a43c891 100644 --- a/resources/conandata.yml +++ b/resources/conandata.yml @@ -1 +1 @@ -version: "5.8.0" +version: "5.8.1" From bcd74aac3a11dfde9ce073d4b0f7ed759bff1729 Mon Sep 17 00:00:00 2001 From: HellAholic Date: Wed, 28 Aug 2024 17:08:57 +0200 Subject: [PATCH 6/7] Revert "TPU removal of 0.2mm" Requires upgrade script --- .../um_f4_aa0.8_tpu_0.2mm.inst.cfg | 24 +++++++++++++++++++ 1 file changed, 24 insertions(+) create mode 100644 resources/quality/ultimaker_factor4/um_f4_aa0.8_tpu_0.2mm.inst.cfg diff --git a/resources/quality/ultimaker_factor4/um_f4_aa0.8_tpu_0.2mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_aa0.8_tpu_0.2mm.inst.cfg new file mode 100644 index 0000000000..7db0c220f4 --- /dev/null +++ b/resources/quality/ultimaker_factor4/um_f4_aa0.8_tpu_0.2mm.inst.cfg @@ -0,0 +1,24 @@ +[general] +definition = ultimaker_factor4 +name = Fast +version = 4 + +[metadata] +material = generic_tpu +quality_type = draft +setting_version = 23 +type = quality +variant = AA 0.8 +weight = -2 + +[values] +_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.1 +_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True +_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1 +infill_pattern = ='zigzag' if infill_sparse_density > 50 else 'cross_3d' +infill_sparse_density = 10 +inset_direction = outside_in +skin_material_flow = =material_flow * 0.9 +skin_material_flow_layer_0 = 90 +speed_layer_0 = 20 + From 63ff5517541d5d5973b433236508ebf70a85e3fd Mon Sep 17 00:00:00 2001 From: HellAholic Date: Wed, 28 Aug 2024 17:34:17 +0200 Subject: [PATCH 7/7] 5.8.1 changelog --- resources/texts/change_log.txt | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/resources/texts/change_log.txt b/resources/texts/change_log.txt index cb5aa3d2a6..237caedea9 100644 --- a/resources/texts/change_log.txt +++ b/resources/texts/change_log.txt @@ -1,3 +1,11 @@ +[5.8.1] + +* Bug fixes: +- Fixed an issue where materials could not be synced to UltiMaker Printers + +* Profile Improvements +- Significant improvements for PVA and TPU 95A profiles for UltiMaker Factor 4 + [5.8] * New Z Seam Settings: