Merge branch 'main' into updated_elegoo_definitions

2025-08-05 04:54:04 -06:00 · 2023-04-28 10:32:15 +02:00 · 2023-04-28 10:32:15 +02:00 · 77b38bb45d
commit 77b38bb45d
parent 12c53ce4e4 340e10c524
118 changed files with 4415 additions and 1408 deletions
--- a/resources/quality/ultimaker3/um3_aa0.4_BAM_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_BAM_Draft_Print.inst.cfg
@ -23,7 +23,6 @@ speed_wall = =math.ceil(speed_print * 50 / 70)
 speed_wall_0 = =math.ceil(speed_wall * 35 / 50)
 support_angle = 45
 support_bottom_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height
-support_brim_enable = True
 support_interface_density = =min(extruderValues('material_surface_energy'))
 support_interface_enable = True
 support_top_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height
--- a/resources/quality/ultimaker3/um3_aa0.4_BAM_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_BAM_Fast_Print.inst.cfg
@ -22,7 +22,6 @@ speed_wall = =math.ceil(speed_print * 40 / 80)
 speed_wall_0 = =math.ceil(speed_wall * 30 / 40)
 support_angle = 45
 support_bottom_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height
-support_brim_enable = True
 support_infill_sparse_thickness = =2*layer_height
 support_interface_density = =min(extruderValues('material_surface_energy'))
 support_interface_enable = True
--- a/resources/quality/ultimaker3/um3_aa0.4_BAM_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_BAM_Normal_Quality.inst.cfg
@ -19,7 +19,6 @@ prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100
 skin_overlap = 10
 support_angle = 45
 support_bottom_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height
-support_brim_enable = True
 support_infill_sparse_thickness = =2*layer_height
 support_interface_density = =min(extruderValues('material_surface_energy'))
 support_interface_enable = True
--- a/resources/quality/ultimaker3/um3_bb0.4_PVA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_bb0.4_PVA_Draft_Print.inst.cfg
@ -19,6 +19,5 @@ prime_tower_enable = False
 retraction_count_max = 5
 skin_overlap = 20
 skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width))
-support_brim_enable = True
 support_interface_enable = True

--- a/resources/quality/ultimaker3/um3_bb0.4_PVA_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_bb0.4_PVA_Fast_Print.inst.cfg
@ -19,7 +19,6 @@ prime_tower_enable = False
 retraction_count_max = 5
 skin_overlap = 15
 skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width))
-support_brim_enable = True
 support_infill_sparse_thickness = =2*layer_height
 support_interface_enable = True

--- a/resources/quality/ultimaker3/um3_bb0.4_PVA_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_bb0.4_PVA_High_Quality.inst.cfg
@ -17,7 +17,6 @@ cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extru
 prime_tower_enable = False
 retraction_count_max = 5
 skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width))
-support_brim_enable = True
 support_infill_sparse_thickness = =3*layer_height
 support_interface_enable = True

--- a/resources/quality/ultimaker3/um3_bb0.4_PVA_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_bb0.4_PVA_Normal_Quality.inst.cfg
@ -17,7 +17,6 @@ cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extru
 prime_tower_enable = False
 retraction_count_max = 5
 skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width))
-support_brim_enable = True
 support_infill_sparse_thickness = =2*layer_height
 support_interface_enable = True

--- a/resources/quality/ultimaker3/um3_bb0.8_PVA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_bb0.8_PVA_Draft_Print.inst.cfg
@ -17,6 +17,5 @@ cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extru
 material_print_temperature = =default_material_print_temperature + 5
 retraction_count_max = 5
 skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width))
-support_brim_enable = True
 support_interface_enable = True

--- a/resources/quality/ultimaker3/um3_bb0.8_PVA_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_bb0.8_PVA_Superdraft_Print.inst.cfg
@ -16,6 +16,5 @@ brim_replaces_support = False
 cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
 retraction_count_max = 5
 skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width))
-support_brim_enable = True
 support_interface_enable = True

--- a/resources/quality/ultimaker3/um3_bb0.8_PVA_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_bb0.8_PVA_Verydraft_Print.inst.cfg
@ -16,6 +16,5 @@ brim_replaces_support = False
 cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
 retraction_count_max = 5
 skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width))
-support_brim_enable = True
 support_interface_enable = True

--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_bam_0.15mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_bam_0.15mm.inst.cfg
@ -22,7 +22,6 @@ speed_wall = =math.ceil(speed_print * 40 / 80)
 speed_wall_0 = =math.ceil(speed_wall * 30 / 40)
 support_angle = 45
 support_bottom_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height
-support_brim_enable = True
 support_infill_sparse_thickness = =2 * layer_height
 support_interface_density = =min(extruderValues('material_surface_energy'))
 support_interface_enable = True
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_bam_0.1mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_bam_0.1mm.inst.cfg
@ -19,7 +19,6 @@ prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100
 skin_overlap = 10
 support_angle = 45
 support_bottom_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height
-support_brim_enable = True
 support_infill_sparse_thickness = =2 * layer_height
 support_interface_density = =min(extruderValues('material_surface_energy'))
 support_interface_enable = True
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_bam_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_bam_0.2mm.inst.cfg
@ -23,7 +23,6 @@ speed_wall = =math.ceil(speed_print * 50 / 70)
 speed_wall_0 = =math.ceil(speed_wall * 35 / 50)
 support_angle = 45
 support_bottom_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height
-support_brim_enable = True
 support_interface_density = =min(extruderValues('material_surface_energy'))
 support_interface_enable = True
 support_top_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_bam_0.3mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_bam_0.3mm.inst.cfg
@ -24,7 +24,6 @@ speed_wall = =math.ceil(speed_print * 50 / 70)
 speed_wall_0 = =math.ceil(speed_wall * 35 / 50)
 support_angle = 45
 support_bottom_distance = 0.3
-support_brim_enable = True
 support_interface_density = =min(extruderValues('material_surface_energy'))
 support_interface_enable = True
 support_top_distance = 0.3
--- a/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.06mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.06mm.inst.cfg
@ -17,7 +17,6 @@ cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extru
 prime_tower_enable = False
 retraction_count_max = 5
 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width))
-support_brim_enable = True
 support_infill_sparse_thickness = =3 * layer_height
 support_interface_enable = True

--- a/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.15mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.15mm.inst.cfg
@ -19,7 +19,6 @@ prime_tower_enable = False
 retraction_count_max = 5
 skin_overlap = 15
 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width))
-support_brim_enable = True
 support_infill_sparse_thickness = =2 * layer_height
 support_interface_enable = True

--- a/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.1mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.1mm.inst.cfg
@ -17,7 +17,6 @@ cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extru
 prime_tower_enable = False
 retraction_count_max = 5
 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width))
-support_brim_enable = True
 support_infill_sparse_thickness = =2 * layer_height
 support_interface_enable = True

--- a/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.2mm.inst.cfg
@ -19,6 +19,5 @@ prime_tower_enable = False
 retraction_count_max = 5
 skin_overlap = 20
 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width))
-support_brim_enable = True
 support_interface_enable = True

--- a/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.3mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.3mm.inst.cfg
@ -17,7 +17,6 @@ brim_replaces_support = False
 cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
 retraction_count_max = 5
 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width))
-support_brim_enable = True
 support_infill_sparse_thickness = 0.3
 support_interface_enable = True

--- a/resources/quality/ultimaker_s3/um_s3_bb0.8_pva_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_bb0.8_pva_0.2mm.inst.cfg
@ -17,6 +17,5 @@ cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extru
 material_print_temperature = =default_material_print_temperature + 5
 retraction_count_max = 5
 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width))
-support_brim_enable = True
 support_interface_enable = True

--- a/resources/quality/ultimaker_s3/um_s3_bb0.8_pva_0.3mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_bb0.8_pva_0.3mm.inst.cfg
@ -16,7 +16,6 @@ brim_replaces_support = False
 cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
 retraction_count_max = 5
 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width))
-support_brim_enable = True
 support_infill_sparse_thickness = 0.3
 support_interface_enable = True

--- a/resources/quality/ultimaker_s3/um_s3_bb0.8_pva_0.4mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_bb0.8_pva_0.4mm.inst.cfg
@ -16,6 +16,5 @@ brim_replaces_support = False
 cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
 retraction_count_max = 5
 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width))
-support_brim_enable = True
 support_interface_enable = True

--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_bam_0.15mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_bam_0.15mm.inst.cfg
@ -22,7 +22,6 @@ speed_wall = =math.ceil(speed_print * 40 / 80)
 speed_wall_0 = =math.ceil(speed_wall * 30 / 40)
 support_angle = 45
 support_bottom_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height
-support_brim_enable = True
 support_infill_sparse_thickness = =2 * layer_height
 support_interface_density = =min(extruderValues('material_surface_energy'))
 support_interface_enable = True
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_bam_0.1mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_bam_0.1mm.inst.cfg
@ -19,7 +19,6 @@ prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100
 skin_overlap = 10
 support_angle = 45
 support_bottom_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height
-support_brim_enable = True
 support_infill_sparse_thickness = =2 * layer_height
 support_interface_density = =min(extruderValues('material_surface_energy'))
 support_interface_enable = True
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_bam_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_bam_0.2mm.inst.cfg
@ -23,7 +23,6 @@ speed_wall = =math.ceil(speed_print * 50 / 70)
 speed_wall_0 = =math.ceil(speed_wall * 35 / 50)
 support_angle = 45
 support_bottom_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height
-support_brim_enable = True
 support_interface_density = =min(extruderValues('material_surface_energy'))
 support_interface_enable = True
 support_top_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_bam_0.3mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_bam_0.3mm.inst.cfg
@ -24,7 +24,6 @@ speed_wall = =math.ceil(speed_print * 50 / 70)
 speed_wall_0 = =math.ceil(speed_wall * 35 / 50)
 support_angle = 45
 support_bottom_distance = 0.3
-support_brim_enable = True
 support_interface_density = =min(extruderValues('material_surface_energy'))
 support_interface_enable = True
 support_top_distance = 0.3
--- a/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.06mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.06mm.inst.cfg
@ -17,7 +17,6 @@ cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extru
 prime_tower_enable = False
 retraction_count_max = 5
 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width))
-support_brim_enable = True
 support_infill_sparse_thickness = =3 * layer_height
 support_interface_enable = True

--- a/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.15mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.15mm.inst.cfg
@ -19,7 +19,6 @@ prime_tower_enable = False
 retraction_count_max = 5
 skin_overlap = 15
 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width))
-support_brim_enable = True
 support_infill_sparse_thickness = =2 * layer_height
 support_interface_enable = True

--- a/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.1mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.1mm.inst.cfg
@ -17,7 +17,6 @@ cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extru
 prime_tower_enable = False
 retraction_count_max = 5
 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width))
-support_brim_enable = True
 support_infill_sparse_thickness = =2 * layer_height
 support_interface_enable = True

--- a/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.2mm.inst.cfg
@ -19,6 +19,5 @@ prime_tower_enable = False
 retraction_count_max = 5
 skin_overlap = 20
 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width))
-support_brim_enable = True
 support_interface_enable = True

--- a/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.3mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.3mm.inst.cfg
@ -18,7 +18,6 @@ cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extru
 prime_tower_enable = False
 retraction_count_max = 5
 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width))
-support_brim_enable = True
 support_infill_sparse_thickness = 0.3
 support_interface_enable = True

--- a/resources/quality/ultimaker_s5/um_s5_bb0.8_pva_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_bb0.8_pva_0.2mm.inst.cfg
@ -17,6 +17,5 @@ cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extru
 material_print_temperature = =default_material_print_temperature + 5
 retraction_count_max = 5
 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width))
-support_brim_enable = True
 support_interface_enable = True

--- a/resources/quality/ultimaker_s5/um_s5_bb0.8_pva_0.3mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_bb0.8_pva_0.3mm.inst.cfg
@ -16,7 +16,6 @@ brim_replaces_support = False
 cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
 retraction_count_max = 5
 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width))
-support_brim_enable = True
 support_infill_sparse_thickness = 0.3
 support_interface_enable = True

--- a/resources/quality/ultimaker_s5/um_s5_bb0.8_pva_0.4mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_bb0.8_pva_0.4mm.inst.cfg
@ -16,6 +16,5 @@ brim_replaces_support = False
 cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
 retraction_count_max = 5
 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width))
-support_brim_enable = True
 support_interface_enable = True