Definitions for Arjun300

resources/definitions/Arjun300_Duplication_Mode.def.json

@@ -0,0 +1,113 @@
+{
+    "version": 2,
+    "name": "Arjun300 Duplication Mode ",
+    "inherits": "fdmprinter",
+    "metadata": {
+        "visible": true,
+        "author": "Venkat kamesh",
+        "manufacturer": "Sri Vignan Technologies",
+        "weight": 3,
+        "file_formats": "text/x-gcode",
+        "has_materials": true,
+        
+        "has_variants": true,
+        "preferred_variant_name": "0.4 mm",
+        "exclude_materials": ["generic_hips", "generic_petg", "generic_bam", "ultimaker_bam", "generic_pva", "ultimaker_pva", "generic_tough_pla", "ultimaker_tough_pla_black", "ultimaker_tough_pla_green", "ultimaker_tough_pla_red", "ultimaker_tough_pla_white"],
+        "machine_extruder_trains":
+        {
+            "0": "arjun300_dm_extruder"
+        }
+    },
+
+    "overrides": {
+        "machine_name": { "default_value": "Arjun300 Duplication Mode " },
+        "machine_width": {
+            "default_value": 158.5
+        },
+        "machine_height": {
+            "default_value": 290
+        },
+        "machine_depth": {
+            "default_value": 310
+        },
+        "machine_center_is_zero": {
+            "default_value": false
+        },
+        "machine_heated_bed": {
+            "default_value": true
+        },
+        "machine_nozzle_size": {
+            "default_value": 0.4
+        },
+        "machine_show_variants": {
+            "default_value": true
+        },
+        "machine_acceleration": {
+            "default_value": 2000
+        },
+        "machine_max_feedrate_x": {
+            "default_value": 150
+        },
+        "machine_max_feedrate_y": {
+            "default_value": 150
+        },
+        "machine_max_feedrate_z": {
+            "default_value": 15
+        },
+        "machine_max_feedrate_e": {
+            "default_value": 150
+        },
+        "machine_disallowed_areas": {
+            "default_value": [
+                [[ -75.75,  -155], [ -79.25,  -155], [ -79.25,  155], [ -75.75,  155]]
+            ]
+        },
+        "line_width": { "value": "machine_nozzle_size"},
+        "material_diameter": {
+            "default_value": 1.75
+        },
+        "retraction_amount": {
+            "default_value": 6.5
+        },
+        "retraction_speed": {
+            "default_value": 30
+        },
+        "adhesion_type": {
+            "default_value": "skirt"
+        },
+        "start_layers_at_same_position":
+        {
+            "enabled": true,
+            "value": false
+        },
+        "layer_start_x":
+        {
+            "enabled": "start_layers_at_same_position",
+            "value": "machine_width/2"
+        },
+        "layer_start_y":
+        {
+            "enabled": "start_layers_at_same_position",
+            "value": "machine_depth"
+        },
+        "retraction_hop_enabled": { "value": false },
+        "retraction_hop_only_when_collides":
+        {
+            "enabled": true,
+            "value": false
+        },
+
+        "machine_gcode_flavor": {
+            "default_value": "Marlin"
+        },
+        "machine_start_gcode": {
+            "default_value": "M605 S2 R0 X155\nG21\nG90\nM82\nM107\nM104 S{material_print_temperature}\nM105\nM109 S{material_print_temperature}\nG28 Z0\nG1 Z15 F150\nG28 Y0\nG1 Y20 F6000\nG28 X0\nG1 X80 F9000\nT0\nG92 E0\nG1 E35 F250\nG1 E45 F120\nG92 E0\nG1 X100 Z0 F5000\nG1 X145 F9000\nM117\n"
+        },
+        "machine_end_gcode": {
+            "default_value": "G91\nG1 Z+0.5 E-16 Y+10 F9000\nG90\nM107\nM107 P1\nM104 S0\nM140 S0\nM117\nM605 S0\nG28 X0 Y0\nM84"
+        },
+        "machine_extruder_count": {
+          "default_value": 1
+        }
+    }
+}

resources/definitions/arjun300.def.json

@@ -0,0 +1,126 @@
+{
+    "version": 2,
+    "name": "Arjun 300",
+    "inherits": "fdmprinter",
+    "metadata": {
+        "visible": true,
+        "author": "Venkat kamesh",
+        "manufacturer": "Sri Vignan Technologies",
+        "weight": 3,
+        "file_formats": "text/x-gcode",
+        "platform": "arjun300_platform.stl",
+		"platform_offset": [0, -5, 0],
+        "has_materials": true,
+        
+        "has_variants": true,
+        "preferred_variant_name": "0.4 mm",
+        "machine_extruder_trains":
+        {
+            "0": "arjun300_dual_extruder_0",
+            "1": "arjun300_dual_extruder_1"
+        }
+    },
+
+    "overrides": {
+        "machine_name": { "default_value": "Arjun 300" },
+        "machine_width": {
+            "default_value": 317
+        },
+        "machine_height": {
+            "default_value": 290
+        },
+        "machine_depth": {
+            "default_value": 310
+        },
+        "machine_center_is_zero": {
+            "default_value": false
+        },
+        "machine_heated_bed": {
+            "default_value": true
+        },
+        "machine_nozzle_size": {
+            "default_value": 0.4
+        },
+        "machine_show_variants": {
+            "default_value": true
+        },
+         "machine_acceleration": {
+            "default_value": 2000
+        },
+        "machine_max_feedrate_x": {
+            "default_value": 300
+        },
+        "machine_max_feedrate_y": {
+            "default_value": 300
+        },
+        "machine_max_feedrate_z": {
+            "default_value": 15
+        },
+        "machine_max_feedrate_e": {
+            "default_value": 150
+        },
+        "machine_use_extruder_offset_to_offset_coords": {
+            "default_value": false
+        },
+        "line_width": {
+            "value": "machine_nozzle_size"
+        },
+        "speed_travel": {
+            "maximum_value": "300",
+            "value": "200"
+        },
+        "optimize_wall_printing_order": { "value": "True" },
+        "material_diameter": {
+            "default_value": 1.75
+        },
+        "retraction_amount": {
+            "default_value": 6.5
+        },
+        "retraction_speed": {
+            "default_value": 30
+        },
+        "switch_extruder_retraction_amount": {
+		    "default_value": 16,
+			"enabled": true
+        },
+		"switch_extruder_retraction_speeds": {
+		    "default_value": 30,
+			"enabled": true
+        },
+		"switch_extruder_retraction_speed": {
+		    "default_value": 30,
+			"enabled": true
+        },
+		"switch_extruder_prime_speed": {
+		    "default_value": 30,
+			"enabled": true
+        },
+        "adhesion_type": {
+            "default_value": "skirt"
+        },
+        "start_layers_at_same_position": {
+            "enabled": true,
+            "value": false
+        },
+        "layer_start_x": {
+            "enabled": "start_layers_at_same_position",
+            "value": "machine_width/2"
+        },
+        "layer_start_y": {
+            "enabled": "start_layers_at_same_position",
+            "value": "machine_depth"
+        },
+        "machine_gcode_flavor": {
+            "default_value": "Marlin"
+        },
+        "machine_start_gcode": {
+            "default_value": "M605 S0\nG21\nG90\nM82\nM107\nT1\nG28\nG1 Z0.3 F150\nT1\nG92 E0\nG1 E45 F210\nG92 E0\nT0\nG92 E0\nG1 E45 F210\nG92 E0\nM117\n"
+        },
+        "machine_end_gcode": {
+            "default_value": "G91\nG1 Z+0.5 E-16 Y+10 F9000\nG90\nM107\nM104 S0 T1\nM104 S0 T0\nM140 S0\nM117\nG28 X0 Y0\nT0\nM84"
+        },
+        "machine_extruder_count": {
+          "default_value": 2
+        }
+    }
+}

resources/extruders/arjun300_dm_extruder.def.json

@@ -0,0 +1,21 @@
+{
+    "id": "arjun300_dm_extruder",
+    "version": 2,
+    "name": "Duplication Extruder",
+    "inherits": "fdmextruder",
+    "metadata": {
+        "machine": "arjun300_dm ",
+        "position": "0"
+    },
+
+    "overrides": {
+        "extruder_nr": {
+            "default_value": 0,
+            "maximum_value": "1"
+        },
+        "machine_nozzle_size": { "default_value": 0.4 },
+        "material_diameter": { "default_value": 1.75 },
+        "machine_nozzle_offset_x": { "default_value": 0 },
+        "machine_nozzle_offset_y": { "default_value": 0 }
+    }
+}

resources/extruders/arjun300_dual_extruder_0.def.json

@@ -0,0 +1,27 @@
+{
+    "id": "arjun300_dual_extruder_0",
+    "version": 2,
+    "name": "Left Extruder",
+    "inherits": "fdmextruder",
+    "metadata": {
+        "machine": "arjun300_dual",
+        "position": "0"
+    },
+
+    "overrides": {
+        "extruder_nr": {
+            "default_value": 0,
+            "maximum_value": "1"
+        },
+        "machine_nozzle_size": { "default_value": 0.4 },
+        "material_diameter": { "default_value": 1.75 },
+        "machine_nozzle_offset_x": { "default_value": 0 },
+        "machine_nozzle_offset_y": { "default_value": 0 },
+        "machine_extruder_start_pos_abs": { "default_value": true },
+        "machine_extruder_start_pos_x": { "value": "prime_tower_position_x - 10" },
+        "machine_extruder_start_pos_y": { "value": "prime_tower_position_y + 10" },
+        "machine_extruder_end_pos_abs": { "default_value": true },
+        "machine_extruder_end_pos_x": { "value": 1 },
+        "machine_extruder_end_pos_y": { "value": "prime_tower_position_y" }
+    }
+}

resources/extruders/arjun300_dual_extruder_1.def.json

@@ -0,0 +1,29 @@
+{
+    "id": "arjun300_dual_extruder_1",
+    "version": 2,
+    "name": "Right Extruder",
+    "inherits": "fdmextruder",
+    "metadata": {
+        "machine": "arjun300_dual",
+        "position": "1"
+    },
+
+    "overrides": {
+        "extruder_nr": {
+            "default_value": 1,
+            "maximum_value": "1"
+        },
+        "machine_nozzle_size": { "default_value": 0.4 },
+        "material_diameter": { "default_value": 1.75 },
+        "machine_nozzle_offset_x": { "default_value": 0.0 },
+        "machine_nozzle_offset_y": { "default_value": 0.0 },
+        "machine_extruder_start_pos_abs": { "default_value": true },
+        "machine_extruder_start_pos_x": { "value": "prime_tower_position_x - 10" },
+        "machine_extruder_start_pos_y": { "value": "prime_tower_position_y + 10" },
+        "machine_extruder_end_pos_abs": { "default_value": true },
+        "machine_extruder_end_pos_x": { "value": 315.5 },
+        "machine_extruder_end_pos_y": { "value": "prime_tower_position_y" }
+    }
+}
+
+

resources/variants/arjun300_0.2.inst.cfg

@@ -0,0 +1,13 @@
+[general]
+name = 0.2 mm Nozzle
+version = 4
+definition = arjun300
+
+[metadata]
+
+setting_version = 15
+type = variant
+hardware_type = nozzle
+
+[values]
+machine_nozzle_size = 0.2

resources/variants/arjun300_0.3.inst.cfg

@@ -0,0 +1,13 @@
+[general]
+name = 0.3 mm Nozzle
+version = 4
+definition = arjun300
+
+[metadata]
+
+setting_version = 15
+type = variant
+hardware_type = nozzle
+
+[values]
+machine_nozzle_size = 0.3

resources/variants/arjun300_0.4.inst.cfg

@@ -0,0 +1,13 @@
+[general]
+name = 0.4 mm Nozzle
+version = 4
+definition = arjun300
+
+[metadata]
+
+setting_version = 15
+type = variant
+hardware_type = nozzle
+
+[values]
+machine_nozzle_size = 0.4

resources/variants/arjun300_0.5.inst.cfg

@@ -0,0 +1,13 @@
+[general]
+name = 0.5 mm Nozzle
+version = 4
+definition = arjun300
+
+[metadata]
+
+setting_version = 15
+type = variant
+hardware_type = nozzle
+
+[values]
+machine_nozzle_size = 0.5

resources/variants/arjun300_0.6.inst.cfg

@@ -0,0 +1,13 @@
+[general]
+name = 0.6 mm Nozzle
+version = 4
+definition = arjun300
+
+[metadata]
+
+setting_version = 15
+type = variant
+hardware_type = nozzle
+
+[values]
+machine_nozzle_size = 0.6

resources/variants/arjun300_0.8.inst.cfg

@@ -0,0 +1,13 @@
+[general]
+name = 0.8 mm Nozzle
+version = 4
+definition = arjun300
+
+[metadata]
+
+setting_version = 15
+type = variant
+hardware_type = nozzle
+
+[values]
+machine_nozzle_size = 0.8

resources/variants/arjun300_dm_0.2.inst.cfg

@@ -0,0 +1,13 @@
+[general]
+name = 0.2 mm Nozzle
+version = 4
+definition = Arjun300_Duplication_Mode
+
+[metadata]
+
+setting_version = 15
+type = variant
+hardware_type = nozzle
+
+[values]
+machine_nozzle_size = 0.2

resources/variants/arjun300_dm_0.3.inst.cfg

@@ -0,0 +1,13 @@
+[general]
+name = 0.3 mm Nozzle
+version = 4
+definition = Arjun300_Duplication_Mode
+
+[metadata]
+
+setting_version = 15
+type = variant
+hardware_type = nozzle
+
+[values]
+machine_nozzle_size = 0.3

resources/variants/arjun300_dm_0.4.inst.cfg

@@ -0,0 +1,13 @@
+[general]
+name = 0.4 mm Nozzle
+version = 4
+definition = Arjun300_Duplication_Mode
+
+[metadata]
+
+setting_version = 15
+type = variant
+hardware_type = nozzle
+
+[values]
+machine_nozzle_size = 0.4

resources/variants/arjun300_dm_0.5.inst.cfg

@@ -0,0 +1,13 @@
+[general]
+name = 0.5 mm Nozzle
+version = 4
+definition = Arjun300_Duplication_Mode
+
+[metadata]
+
+setting_version = 15
+type = variant
+hardware_type = nozzle
+
+[values]
+machine_nozzle_size = 0.5

resources/variants/arjun300_dm_0.6.inst.cfg

@@ -0,0 +1,13 @@
+[general]
+name = 0.6 mm Nozzle
+version = 4
+definition = Arjun300_Duplication_Mode
+
+[metadata]
+
+setting_version = 15
+type = variant
+hardware_type = nozzle
+
+[values]
+machine_nozzle_size = 0.6

resources/variants/arjun300_dm_0.8.inst.cfg

@@ -0,0 +1,13 @@
+[general]
+name = 0.8 mm Nozzle
+version = 4
+definition = Arjun300_Duplication_Mode
+
+[metadata]
+
+setting_version = 15
+type = variant
+hardware_type = nozzle
+
+[values]
+machine_nozzle_size = 0.8

resources/variants/arjun300_pva_0.2.inst.cfg

@@ -0,0 +1,32 @@
+[general]
+name = PVA 0.2 mm Nozzle
+version = 4
+definition = arjun300
+
+[metadata]
+
+setting_version = 15
+type = variant
+hardware_type = nozzle
+
+[values]
+machine_nozzle_size = 0.2
+support_infill_sparse_thickness = =(layer_height * 2) if (layer_height * 2) <= 0.75 * machine_nozzle_size else layer_height
+support_offset = 3
+support_bottom_height = =layer_height * 2
+support_bottom_pattern = zigzag
+support_bottom_stair_step_height = =layer_height
+support_infill_rate = 50
+support_interface_enable = True
+support_interface_height = =layer_height * 5
+support_interface_skip_height = =layer_height
+support_join_distance = 3
+support_xy_distance = =machine_nozzle_size / 2
+support_xy_distance_overhang = =machine_nozzle_size / 2
+support_angle = 45
+support_pattern = triangles
+support_use_towers = False
+support_z_distance = 0
+gradual_support_infill_steps = 2
+support_interface_density = 100
+support_interface_pattern = concentric

resources/variants/arjun300_pva_0.3.inst.cfg

@@ -0,0 +1,32 @@
+[general]
+name = PVA 0.3 mm Nozzle
+version = 4
+definition = arjun300
+
+[metadata]
+
+setting_version = 15
+type = variant
+hardware_type = nozzle
+
+[values]
+machine_nozzle_size = 0.3
+support_infill_sparse_thickness = =(layer_height * 2) if (layer_height * 2) <= 0.75 * machine_nozzle_size else layer_height
+support_offset = 3
+support_bottom_height = =layer_height * 2
+support_bottom_pattern = zigzag
+support_bottom_stair_step_height = =layer_height
+support_infill_rate = 50
+support_interface_enable = True
+support_interface_height = =layer_height * 5
+support_interface_skip_height = =layer_height
+support_join_distance = 3
+support_xy_distance = =machine_nozzle_size / 2
+support_xy_distance_overhang = =machine_nozzle_size / 2
+support_angle = 45
+support_pattern = triangles
+support_use_towers = False
+support_z_distance = 0
+gradual_support_infill_steps = 2
+support_interface_density = 100
+support_interface_pattern = concentric

resources/variants/arjun300_pva_0.4.inst.cfg

@@ -0,0 +1,32 @@
+[general]
+name = PVA 0.4 mm Nozzle
+version = 4
+definition = arjun300
+
+[metadata]
+
+setting_version = 15
+type = variant
+hardware_type = nozzle
+
+[values]
+machine_nozzle_size = 0.4
+support_infill_sparse_thickness = =(layer_height * 2) if (layer_height * 2) <= 0.75 * machine_nozzle_size else layer_height
+support_offset = 3
+support_bottom_height = =layer_height * 2
+support_bottom_pattern = zigzag
+support_bottom_stair_step_height = =layer_height
+support_infill_rate = 50
+support_interface_enable = True
+support_interface_height = =layer_height * 5
+support_interface_skip_height = =layer_height
+support_join_distance = 3
+support_xy_distance = =machine_nozzle_size / 2
+support_xy_distance_overhang = =machine_nozzle_size / 2
+support_angle = 45
+support_pattern = triangles
+support_use_towers = False
+support_z_distance = 0
+gradual_support_infill_steps = 2
+support_interface_density = 100
+support_interface_pattern = concentric

resources/variants/arjun300_pva_0.5.inst.cfg

@@ -0,0 +1,32 @@
+[general]
+name = PVA 0.5 mm Nozzle
+version = 4
+definition = arjun300
+
+[metadata]
+
+setting_version = 15
+type = variant
+hardware_type = nozzle
+
+[values]
+machine_nozzle_size = 0.5
+support_infill_sparse_thickness = =(layer_height * 2) if (layer_height * 2) <= 0.75 * machine_nozzle_size else layer_height
+support_offset = 3
+support_bottom_height = =layer_height * 2
+support_bottom_pattern = zigzag
+support_bottom_stair_step_height = =layer_height
+support_infill_rate = 50
+support_interface_enable = True
+support_interface_height = =layer_height * 5
+support_interface_skip_height = =layer_height
+support_join_distance = 3
+support_xy_distance = =machine_nozzle_size / 2
+support_xy_distance_overhang = =machine_nozzle_size / 2
+support_angle = 45
+support_pattern = triangles
+support_use_towers = False
+support_z_distance = 0
+gradual_support_infill_steps = 2
+support_interface_density = 100
+support_interface_pattern = concentric

resources/variants/arjun300_pva_0.6.inst.cfg

@@ -0,0 +1,32 @@
+[general]
+name = PVA 0.6 mm Nozzle
+version = 4
+definition = arjun300
+
+[metadata]
+
+setting_version = 15
+type = variant
+hardware_type = nozzle
+
+[values]
+machine_nozzle_size = 0.6
+support_infill_sparse_thickness = =(layer_height * 2) if (layer_height * 2) <= 0.75 * machine_nozzle_size else layer_height
+support_offset = 3
+support_bottom_height = =layer_height * 2
+support_bottom_pattern = zigzag
+support_bottom_stair_step_height = =layer_height
+support_infill_rate = 50
+support_interface_enable = True
+support_interface_height = =layer_height * 5
+support_interface_skip_height = =layer_height
+support_join_distance = 3
+support_xy_distance = =machine_nozzle_size / 2
+support_xy_distance_overhang = =machine_nozzle_size / 2
+support_angle = 45
+support_pattern = triangles
+support_use_towers = False
+support_z_distance = 0
+gradual_support_infill_steps = 2
+support_interface_density = 100
+support_interface_pattern = concentric

resources/variants/arjun300_pva_0.8.inst.cfg

@@ -0,0 +1,32 @@
+[general]
+name = PVA 0.8 mm Nozzle
+version = 4
+definition = arjun300
+
+[metadata]
+
+setting_version = 15
+type = variant
+hardware_type = nozzle
+
+[values]
+machine_nozzle_size = 0.8
+support_infill_sparse_thickness = =(layer_height * 2) if (layer_height * 2) <= 0.75 * machine_nozzle_size else layer_height
+support_offset = 3
+support_bottom_height = =layer_height * 2
+support_bottom_pattern = zigzag
+support_bottom_stair_step_height = =layer_height
+support_infill_rate = 50
+support_interface_enable = True
+support_interface_height = =layer_height * 5
+support_interface_skip_height = =layer_height
+support_join_distance = 3
+support_xy_distance = =machine_nozzle_size / 2
+support_xy_distance_overhang = =machine_nozzle_size / 2
+support_angle = 45
+support_pattern = triangles
+support_use_towers = False
+support_z_distance = 0
+gradual_support_infill_steps = 2
+support_interface_density = 100
+support_interface_pattern = concentric