mirror of
https://github.com/Ultimaker/Cura.git
synced 2025-08-10 07:15:03 -06:00
Requested changes
This commit is contained in:
mario
parent
bb56d01c21
commit
7602f20d25
1 changed files with 0 additions and 23 deletions
|
|
@ -24,7 +24,6 @@
|
|||
},
|
||||
"overrides":
|
||||
{
|
||||
"acceleration_enabled": { "value": false },
|
||||
"acceleration_print": { "value": 500 },
|
||||
"acceleration_roofing": { "enabled": "acceleration_enabled and roofing_layer_count > 0 and top_layers > 0" },
|
||||
"acceleration_travel": { "value": 500 },
|
||||
|
|
@ -32,26 +31,20 @@
|
|||
"adaptive_layer_height_variation": { "value": 0.04 },
|
||||
"adaptive_layer_height_variation_step": { "value": 0.04 },
|
||||
"adhesion_type": { "value": "'skirt'" },
|
||||
"brim_replaces_support": { "value": true },
|
||||
"brim_width": { "value": 4 },
|
||||
"cool_fan_enabled": { "value": true },
|
||||
"cool_fan_full_at_height": { "value": "layer_height_0 + 2 * layer_height" },
|
||||
"cool_min_layer_time": { "value": 10 },
|
||||
"fill_outline_gaps": { "value": false },
|
||||
"fill_perimeter_gaps": { "value": "'everywhere'" },
|
||||
"filter_out_tiny_gaps": { "value": false },
|
||||
"infill_before_walls": { "value": true },
|
||||
"infill_overlap": { "value": 30.0 },
|
||||
"infill_pattern": { "value": "'lines'" },
|
||||
"infill_sparse_density": { "value": "20" },
|
||||
"infill_wipe_dist": { "value": 0.0 },
|
||||
"initial_layer_line_width_factor": { "default_value": 130.0 },
|
||||
"jerk_enabled": { "value": false },
|
||||
"jerk_print": { "value": 8 },
|
||||
"jerk_travel": { "value": "jerk_print" },
|
||||
"jerk_travel_layer_0": { "value": "jerk_travel" },
|
||||
"layer_height_0": { "default_value": 0.2 },
|
||||
"line_width": { "value": "machine_nozzle_size" },
|
||||
"machine_acceleration": { "value": 500 },
|
||||
"machine_end_gcode": { "default_value": "M104 T0 S0 ;left extruder heater off\nM104 T1 S0 ;right extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning" },
|
||||
"machine_extruder_count": { "default_value": 2 },
|
||||
|
|
@ -70,7 +63,6 @@
|
|||
"machine_start_gcode": { "default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 ;move to min endstops\nG92 E0 ;reset extruder\nG1 E15 F1500 ;move extruder 15mm\nG1 Z15.0 F3000 ;move the header up 15mm\nM117 printing... ;LCD message" },
|
||||
"material_diameter": { "default_value": 1.75 },
|
||||
"material_final_print_temperature": { "value": "material_print_temperature" },
|
||||
"material_flow": { "value": 100 },
|
||||
"material_initial_print_temperature": { "value": "material_print_temperature" },
|
||||
"meshfix_maximum_resolution": { "value": "0.25" },
|
||||
"meshfix_maximum_travel_resolution": { "value": "meshfix_maximum_resolution" },
|
||||
|
|
@ -82,14 +74,11 @@
|
|||
"raft_airgap": { "default_value": 0.2 },
|
||||
"raft_margin": {"default_value": 2 },
|
||||
"retraction_combing": { "value": "'off' if retraction_hop_enabled else 'noskin'" },
|
||||
"retraction_combing_max_distance": { "value": 0 },
|
||||
"retraction_count_max": { "value": 100 },
|
||||
"retraction_enable": { "value": true },
|
||||
"retraction_extrusion_window": { "value": 4 },
|
||||
"retraction_hop": { "value": 0.2 },
|
||||
"retraction_hop_after_extruder_switch_height": { "value": 0.0 },
|
||||
"retraction_hop_enabled": { "value": "False" },
|
||||
"retraction_min_travel": { "value": 1.5 },
|
||||
"retraction_prime_speed":
|
||||
{
|
||||
"maximum_value_warning": "machine_max_feedrate_e if retraction_enable else float('inf')",
|
||||
|
|
@ -106,22 +95,13 @@
|
|||
"maximum_value": 200
|
||||
},
|
||||
"skin_overlap": { "value": 25 },
|
||||
"skirt_brim_speed": { "value": "speed_layer_0" },
|
||||
"skirt_gap": { "value": 3.0 },
|
||||
"skirt_line_count": { "value": 2 },
|
||||
"speed_infill": { "value": "speed_print" },
|
||||
"speed_layer_0": { "value": 20.0 },
|
||||
"speed_prime_tower": { "value": "speed_topbottom" },
|
||||
"speed_print": { "value": 60.0 } ,
|
||||
"speed_print_layer_0": { "value": "speed_layer_0" },
|
||||
"speed_roofing": { "value": "speed_topbottom" },
|
||||
"speed_support": { "value": "speed_wall_0" },
|
||||
"speed_support_interface": { "value": "speed_topbottom" },
|
||||
"speed_travel": { "value": "80.0 if speed_print < 61 else 120.0 if speed_print > 100 else speed_print * 1.5" },
|
||||
"speed_travel_layer_0": { "value": "80 if speed_layer_0 < 21 else 100 if speed_layer_0 > 30 else speed_layer_0 * 5" },
|
||||
"speed_topbottom": { "value": "speed_print / 2" },
|
||||
"speed_wall": { "value": "speed_print / 2" },
|
||||
"speed_wall_0": { "value": "speed_wall" },
|
||||
"speed_wall_x": { "value": "speed_wall" },
|
||||
"speed_z_hop": { "value": 5 },
|
||||
"support_angle": { "value": "math.floor(math.degrees(math.atan(line_width/1.4/layer_height)))" },
|
||||
|
|
@ -132,10 +112,7 @@
|
|||
"support_interface_enable": { "value": true },
|
||||
"support_interface_height": { "value": "layer_height * 4" },
|
||||
"support_interface_pattern": { "value": "'grid'" },
|
||||
"support_interface_skip_height": { "value": 0.2 },
|
||||
"support_pattern": { "value": "'zigzag'" },
|
||||
"support_use_towers": { "value": true },
|
||||
"support_wall_count": { "value": 1 },
|
||||
"support_xy_distance": { "value": "wall_line_width_0 * 2" },
|
||||
"support_xy_distance_overhang": { "value": "wall_line_width_0" },
|
||||
"support_xy_overrides_z": { "value": "'xy_overrides_z'" },
|
||||
|
|
|
|||
Loading…
Add table
Add a link
Reference in a new issue