Moved various variants to their own specific folder

Improves readability

resources/variants/liquid/liquid_vo04.inst.cfg

@@ -0,0 +1,44 @@
+[general]
+definition = liquid
+name = VO 0.4
+version = 4
+
+[metadata]
+hardware_type = nozzle
+setting_version = 20
+type = variant
+
+[values]
+brim_width = 7
+machine_nozzle_cool_down_speed = 0.9
+machine_nozzle_id = VO 0.4
+machine_nozzle_size = 0.4
+machine_nozzle_tip_outer_diameter = 1.0
+raft_acceleration = =acceleration_print
+raft_airgap = 0.3
+raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
+raft_interface_line_spacing = =raft_interface_line_width + 0.2
+raft_interface_line_width = =line_width * 2
+raft_interface_thickness = =layer_height * 1.5
+raft_jerk = =jerk_print
+raft_margin = 15
+raft_surface_layers = 2
+retraction_amount = 3
+retraction_count_max = 25
+retraction_min_travel = =line_width * 2
+retraction_prime_speed = =retraction_speed
+skin_overlap = 15
+speed_print = 70
+speed_topbottom = =math.ceil(speed_print * 30 / 70)
+speed_wall = =math.ceil(speed_print * 30 / 70)
+support_angle = 60
+support_bottom_distance = =support_z_distance / 2
+support_pattern = zigzag
+support_top_distance = =support_z_distance
+support_use_towers = True
+support_z_distance = =layer_height * 2
+switch_extruder_prime_speed = =switch_extruder_retraction_speeds
+switch_extruder_retraction_amount = =machine_heat_zone_length
+top_bottom_thickness = 1.2
+wall_thickness = 1.3
+

resources/variants/liquid/liquid_vo06.inst.cfg

@@ -0,0 +1,47 @@
+[general]
+definition = liquid
+name = VO 0.6
+version = 4
+
+[metadata]
+hardware_type = nozzle
+setting_version = 20
+type = variant
+
+[values]
+brim_width = 7
+machine_nozzle_cool_down_speed = 0.9
+machine_nozzle_id = VO 0.6
+machine_nozzle_size = 0.6
+raft_acceleration = =acceleration_print
+raft_airgap = 0.3
+raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
+raft_interface_line_spacing = =raft_interface_line_width + 0.2
+raft_interface_line_width = =line_width * 2
+raft_interface_thickness = =layer_height * 1.5
+raft_jerk = =jerk_print
+raft_margin = 15
+raft_surface_layers = 2
+retraction_count_max = 25
+retraction_min_travel = =line_width * 2
+retraction_prime_speed = =retraction_speed
+speed_infill = =speed_print
+speed_layer_0 = 20
+speed_print = 45
+speed_support = =speed_topbottom
+speed_topbottom = =math.ceil(speed_print * 25 / 45)
+speed_travel_layer_0 = 50
+speed_wall = =math.ceil(speed_print * 30 / 45)
+speed_wall_0 = =math.ceil(speed_wall * 25 / 30)
+speed_wall_x = =speed_wall
+support_angle = 60
+support_bottom_distance = =support_z_distance / 2
+support_pattern = zigzag
+support_top_distance = =support_z_distance
+support_use_towers = True
+support_z_distance = =layer_height * 2
+switch_extruder_prime_speed = =switch_extruder_retraction_speeds
+switch_extruder_retraction_amount = =machine_heat_zone_length
+top_bottom_thickness = =layer_height * 6
+wall_thickness = =line_width * 3
+

resources/variants/liquid/liquid_vo08.inst.cfg

@@ -0,0 +1,66 @@
+[general]
+definition = liquid
+name = VO 0.8
+version = 4
+
+[metadata]
+hardware_type = nozzle
+setting_version = 20
+type = variant
+
+[values]
+acceleration_enabled = True
+acceleration_print = 4000
+brim_width = 7
+cool_fan_speed = 7
+cool_fan_speed_max = 100
+cool_min_speed = 5
+default_material_print_temperature = 200
+infill_before_walls = False
+infill_line_width = =round(line_width * 0.6 / 0.7, 2)
+infill_overlap = 0
+infill_pattern = triangles
+infill_wipe_dist = 0
+jerk_enabled = True
+jerk_print = 15
+jerk_topbottom = =math.ceil(jerk_print * 15 / 15)
+jerk_wall = =math.ceil(jerk_print * 15 / 15)
+jerk_wall_0 = =math.ceil(jerk_wall * 15 / 15)
+line_width = =machine_nozzle_size
+machine_min_cool_heat_time_window = 15
+machine_nozzle_cool_down_speed = 0.85
+machine_nozzle_heat_up_speed = 1.5
+machine_nozzle_id = VO 0.8
+machine_nozzle_size = 0.8
+machine_nozzle_tip_outer_diameter = 2.0
+material_final_print_temperature = =material_print_temperature - 10
+material_initial_print_temperature = =material_print_temperature - 5
+material_standby_temperature = 100
+multiple_mesh_overlap = 0
+prime_tower_enable = False
+prime_tower_wipe_enabled = True
+retract_at_layer_change = =not magic_spiralize
+retraction_amount = 3
+retraction_count_max = 25
+retraction_extrusion_window = 1
+retraction_hop = 2
+retraction_hop_only_when_collides = True
+retraction_min_travel = =line_width * 2
+skin_overlap = 5
+speed_layer_0 = 20
+speed_print = 35
+speed_topbottom = =math.ceil(speed_print * 25 / 35)
+speed_wall_0 = =math.ceil(speed_wall * 25 / 30)
+support_angle = 60
+support_bottom_distance = =support_z_distance / 2
+support_pattern = zigzag
+support_top_distance = =support_z_distance
+support_z_distance = =layer_height * 2
+switch_extruder_prime_speed = 20
+switch_extruder_retraction_amount = 16.5
+top_bottom_thickness = 1.4
+wall_0_inset = 0
+wall_line_width_0 = =wall_line_width
+wall_line_width_x = =wall_line_width
+wall_thickness = 2
+