Add converted UM2+ profiles (variant/material specific)

resources/profiles/ultimaker2+/abs_0.25_high.curaprofile

@@ -0,0 +1,51 @@
+[general]
+version = 1
+name = High Quality
+machine_type = Ultimaker 2+
+machine_variant = 0.25mm Nozzle
+material = ABS
+
+[settings]
+raft_surface_thickness = 0.27
+raft_base_line_width = 1.0
+raft_margin = 5.0
+cool_min_layer_time = 2
+support_enable = False
+retraction_combing = All
+cool_min_speed = 25
+brim_line_count = 32
+top_thickness = 0.72
+material_flow = 100.0
+cool_lift_head = True
+speed_print = 20
+retraction_hop = 0.0
+machine_nozzle_size = 0.22
+layer_height = 0.06
+speed_wall_0 = 20
+raft_interface_line_spacing = 3.0
+speed_topbottom = 20
+speed_infill = 30
+infill_before_walls = False
+retraction_speed = 40.0
+skin_no_small_gaps_heuristic = False
+infill_sparse_density = 22
+shell_thickness = 0.88
+cool_fan_speed_max = 100
+raft_airgap = 0.0
+material_bed_temperature = 70
+infill_overlap = 15
+speed_wall_x = 25
+skirt_minimal_length = 150.0
+speed_layer_0 = 20
+bottom_thickness = 0.72
+layer_height_0 = 0.15
+magic_mesh_surface_mode = False
+cool_fan_speed_min = 50
+top_bottom_thickness = 0.72
+skirt_gap = 3.0
+raft_interface_line_width = 0.4
+adhesion_type = brim
+support_pattern = lines
+raft_surface_line_width = 0.4
+raft_surface_line_spacing = 3.0
+

resources/profiles/ultimaker2+/abs_0.4_fast.curaprofile

@@ -0,0 +1,51 @@
+[general]
+version = 1
+name = Fast Prints
+machine_type = Ultimaker 2+
+machine_variant = 0.4mm Nozzle
+material = ABS
+
+[settings]
+raft_surface_thickness = 0.27
+raft_base_line_width = 1.0
+raft_margin = 5.0
+cool_min_layer_time = 3
+support_enable = False
+retraction_combing = All
+speed_travel = 150
+cool_min_speed = 20
+brim_line_count = 20
+top_thickness = 0.75
+material_flow = 100.0
+cool_lift_head = True
+speed_print = 40
+retraction_hop = 0.0
+machine_nozzle_size = 0.35
+layer_height = 0.15
+speed_wall_0 = 30
+raft_interface_line_spacing = 3.0
+speed_topbottom = 30
+speed_infill = 55
+infill_before_walls = False
+retraction_speed = 40.0
+skin_no_small_gaps_heuristic = False
+infill_sparse_density = 18
+shell_thickness = 0.7
+cool_fan_speed_max = 100
+raft_airgap = 0.0
+material_bed_temperature = 70
+infill_overlap = 15
+speed_wall_x = 40
+skirt_minimal_length = 150.0
+bottom_thickness = 0.75
+layer_height_0 = 0.26
+magic_mesh_surface_mode = False
+cool_fan_speed_min = 50
+top_bottom_thickness = 0.75
+skirt_gap = 3.0
+raft_interface_line_width = 0.4
+adhesion_type = brim
+support_pattern = lines
+raft_surface_line_width = 0.4
+raft_surface_line_spacing = 3.0
+

resources/profiles/ultimaker2+/abs_0.4_high.curaprofile

@@ -0,0 +1,51 @@
+[general]
+version = 1
+name = High Quality
+machine_type = Ultimaker 2+
+machine_variant = 0.4mm Nozzle
+material = ABS
+
+[settings]
+raft_surface_thickness = 0.27
+raft_base_line_width = 1.0
+raft_margin = 5.0
+cool_min_layer_time = 3
+support_enable = False
+retraction_combing = All
+cool_min_speed = 20
+brim_line_count = 20
+top_thickness = 0.72
+material_flow = 100.0
+cool_lift_head = True
+speed_print = 30
+retraction_hop = 0.0
+machine_nozzle_size = 0.35
+layer_height = 0.06
+speed_wall_0 = 20
+raft_interface_line_spacing = 3.0
+speed_topbottom = 20
+speed_infill = 45
+infill_before_walls = False
+retraction_speed = 40.0
+skin_no_small_gaps_heuristic = False
+infill_sparse_density = 22
+shell_thickness = 1.05
+cool_fan_speed_max = 100
+raft_airgap = 0.0
+material_bed_temperature = 70
+infill_overlap = 15
+speed_wall_x = 30
+skirt_minimal_length = 150.0
+speed_layer_0 = 20
+bottom_thickness = 0.72
+layer_height_0 = 0.26
+magic_mesh_surface_mode = False
+cool_fan_speed_min = 50
+top_bottom_thickness = 0.72
+skirt_gap = 3.0
+raft_interface_line_width = 0.4
+adhesion_type = brim
+support_pattern = lines
+raft_surface_line_width = 0.4
+raft_surface_line_spacing = 3.0
+

resources/profiles/ultimaker2+/abs_0.4_normal.curaprofile

@@ -0,0 +1,46 @@
+[general]
+version = 1
+name = Normal Quality
+machine_type = Ultimaker 2+
+machine_variant = 0.4mm Nozzle
+material = ABS
+
+[settings]
+raft_surface_thickness = 0.27
+raft_base_line_width = 1.0
+raft_margin = 5.0
+support_enable = False
+retraction_combing = All
+cool_min_speed = 20
+brim_line_count = 20
+material_flow = 100.0
+cool_lift_head = True
+speed_print = 30
+retraction_hop = 0.0
+machine_nozzle_size = 0.35
+speed_wall_0 = 20
+raft_interface_line_spacing = 3.0
+speed_topbottom = 20
+speed_infill = 45
+infill_before_walls = False
+retraction_speed = 40.0
+skin_no_small_gaps_heuristic = False
+shell_thickness = 1.05
+cool_fan_speed_max = 100
+raft_airgap = 0.0
+material_bed_temperature = 70
+infill_overlap = 15
+speed_wall_x = 30
+skirt_minimal_length = 150.0
+speed_layer_0 = 20
+layer_height_0 = 0.26
+magic_mesh_surface_mode = False
+cool_fan_speed_min = 50
+cool_min_layer_time = 3
+skirt_gap = 3.0
+raft_interface_line_width = 0.4
+adhesion_type = brim
+support_pattern = lines
+raft_surface_line_width = 0.4
+raft_surface_line_spacing = 3.0
+

resources/profiles/ultimaker2+/abs_0.6_normal.curaprofile

@@ -0,0 +1,50 @@
+[general]
+version = 1
+name = Normal Quality
+machine_type = Ultimaker 2+
+machine_variant = 0.6mm Nozzle
+material = ABS
+
+[settings]
+raft_surface_thickness = 0.27
+raft_base_line_width = 1.0
+raft_margin = 5.0
+cool_min_layer_time = 3
+support_enable = False
+retraction_combing = All
+cool_min_speed = 20
+brim_line_count = 14
+top_thickness = 1.2
+material_flow = 100.0
+cool_lift_head = True
+speed_print = 25
+retraction_hop = 0.0
+machine_nozzle_size = 0.53
+layer_height = 0.15
+speed_wall_0 = 20
+raft_interface_line_spacing = 3.0
+speed_topbottom = 20
+speed_infill = 55
+infill_before_walls = False
+retraction_speed = 40.0
+skin_no_small_gaps_heuristic = False
+shell_thickness = 1.59
+cool_fan_speed_max = 100
+raft_airgap = 0.0
+material_bed_temperature = 70
+infill_overlap = 15
+speed_wall_x = 30
+skirt_minimal_length = 150.0
+speed_layer_0 = 20
+bottom_thickness = 1.2
+layer_height_0 = 0.39
+magic_mesh_surface_mode = False
+cool_fan_speed_min = 50
+top_bottom_thickness = 1.2
+skirt_gap = 3.0
+raft_interface_line_width = 0.4
+adhesion_type = brim
+support_pattern = lines
+raft_surface_line_width = 0.4
+raft_surface_line_spacing = 3.0
+

resources/profiles/ultimaker2+/abs_0.8_fast.curaprofile

@@ -0,0 +1,50 @@
+[general]
+version = 1
+name = Fast Prints
+machine_type = Ultimaker 2+
+machine_variant = 0.8mm Nozzle
+material = ABS
+
+[settings]
+raft_surface_thickness = 0.27
+raft_base_line_width = 1.0
+raft_margin = 5.0
+cool_min_layer_time = 3
+support_enable = False
+retraction_combing = All
+cool_min_speed = 15
+brim_line_count = 10
+top_thickness = 1.2
+material_flow = 100.0
+cool_lift_head = True
+speed_print = 20
+retraction_hop = 0.0
+machine_nozzle_size = 0.7
+layer_height = 0.2
+speed_wall_0 = 20
+raft_interface_line_spacing = 3.0
+speed_topbottom = 20
+speed_infill = 40
+infill_before_walls = False
+retraction_speed = 40.0
+skin_no_small_gaps_heuristic = False
+shell_thickness = 2.1
+cool_fan_speed_max = 100
+raft_airgap = 0.0
+material_bed_temperature = 70
+infill_overlap = 15
+speed_wall_x = 30
+skirt_minimal_length = 150.0
+speed_layer_0 = 20
+bottom_thickness = 1.2
+layer_height_0 = 0.5
+magic_mesh_surface_mode = False
+cool_fan_speed_min = 50
+top_bottom_thickness = 1.2
+skirt_gap = 3.0
+raft_interface_line_width = 0.4
+adhesion_type = brim
+support_pattern = lines
+raft_surface_line_width = 0.4
+raft_surface_line_spacing = 3.0
+

resources/profiles/ultimaker2+/cpe_0.25_high.curaprofile

@@ -0,0 +1,50 @@
+[general]
+version = 1
+name = High Quality
+machine_type = Ultimaker 2+
+machine_variant = 0.25mm Nozzle
+material = CPE
+
+[settings]
+cool_fan_speed_min = 50
+retraction_hop = 0.0
+support_enable = False
+raft_airgap = 0.0
+raft_surface_thickness = 0.27
+raft_interface_line_spacing = 3.0
+skin_no_small_gaps_heuristic = False
+bottom_thickness = 0.72
+raft_surface_line_spacing = 3.0
+retraction_combing = All
+adhesion_type = brim
+cool_min_layer_time = 2
+layer_height = 0.06
+raft_margin = 5.0
+speed_infill = 30
+speed_layer_0 = 20
+brim_line_count = 32
+cool_lift_head = True
+retraction_speed = 40.0
+cool_fan_speed_max = 100
+magic_mesh_surface_mode = False
+speed_print = 20
+shell_thickness = 0.88
+speed_wall_0 = 20
+material_flow = 100.0
+support_pattern = lines
+infill_sparse_density = 22
+raft_interface_line_width = 0.4
+layer_height_0 = 0.15
+material_bed_temperature = 70
+top_thickness = 0.72
+top_bottom_thickness = 0.72
+speed_wall_x = 25
+infill_overlap = 17
+infill_before_walls = False
+raft_surface_line_width = 0.4
+skirt_minimal_length = 150.0
+speed_topbottom = 20
+skirt_gap = 3.0
+raft_base_line_width = 1.0
+machine_nozzle_size = 0.22
+

resources/profiles/ultimaker2+/cpe_0.4_fast.curaprofile

@@ -0,0 +1,50 @@
+[general]
+version = 1
+name = Fast Prints
+machine_type = Ultimaker 2+
+machine_variant = 0.4mm Nozzle
+material = CPE
+
+[settings]
+cool_fan_speed_min = 50
+retraction_hop = 0.0
+skin_no_small_gaps_heuristic = False
+raft_airgap = 0.0
+speed_travel = 150
+raft_surface_thickness = 0.27
+raft_interface_line_spacing = 3.0
+support_enable = False
+raft_surface_line_width = 0.4
+raft_surface_line_spacing = 3.0
+retraction_combing = All
+adhesion_type = brim
+cool_min_layer_time = 3
+layer_height = 0.15
+raft_margin = 5.0
+speed_infill = 45
+bottom_thickness = 0.75
+brim_line_count = 20
+cool_lift_head = True
+retraction_speed = 40.0
+cool_fan_speed_max = 100
+magic_mesh_surface_mode = False
+speed_print = 30
+shell_thickness = 0.7
+speed_wall_0 = 30
+material_flow = 100.0
+support_pattern = lines
+infill_sparse_density = 18
+raft_interface_line_width = 0.4
+layer_height_0 = 0.26
+material_bed_temperature = 70
+top_thickness = 0.75
+top_bottom_thickness = 0.75
+speed_wall_x = 40
+infill_overlap = 17
+infill_before_walls = False
+skirt_minimal_length = 150.0
+speed_topbottom = 20
+skirt_gap = 3.0
+raft_base_line_width = 1.0
+machine_nozzle_size = 0.35
+

resources/profiles/ultimaker2+/cpe_0.4_high.curaprofile

@@ -0,0 +1,50 @@
+[general]
+version = 1
+name = High Quality
+machine_type = Ultimaker 2+
+machine_variant = 0.4mm Nozzle
+material = CPE
+
+[settings]
+cool_fan_speed_min = 50
+retraction_hop = 0.0
+support_enable = False
+raft_airgap = 0.0
+raft_surface_thickness = 0.27
+raft_interface_line_spacing = 3.0
+skin_no_small_gaps_heuristic = False
+bottom_thickness = 0.72
+raft_surface_line_spacing = 3.0
+retraction_combing = All
+adhesion_type = brim
+cool_min_layer_time = 3
+layer_height = 0.06
+raft_margin = 5.0
+speed_infill = 45
+speed_layer_0 = 20
+brim_line_count = 20
+cool_lift_head = True
+retraction_speed = 40.0
+cool_fan_speed_max = 100
+magic_mesh_surface_mode = False
+speed_print = 20
+shell_thickness = 1.05
+speed_wall_0 = 20
+material_flow = 100.0
+support_pattern = lines
+infill_sparse_density = 22
+raft_interface_line_width = 0.4
+layer_height_0 = 0.26
+material_bed_temperature = 70
+top_thickness = 0.72
+top_bottom_thickness = 0.72
+speed_wall_x = 30
+infill_overlap = 15
+infill_before_walls = False
+raft_surface_line_width = 0.4
+skirt_minimal_length = 150.0
+speed_topbottom = 20
+skirt_gap = 3.0
+raft_base_line_width = 1.0
+machine_nozzle_size = 0.35
+

resources/profiles/ultimaker2+/cpe_0.4_normal.curaprofile

@@ -0,0 +1,45 @@
+[general]
+version = 1
+name = Normal Quality
+machine_type = Ultimaker 2+
+machine_variant = 0.4mm Nozzle
+material = CPE
+
+[settings]
+retraction_hop = 0.0
+support_enable = False
+raft_airgap = 0.0
+raft_surface_thickness = 0.27
+support_pattern = lines
+raft_interface_line_spacing = 3.0
+skin_no_small_gaps_heuristic = False
+raft_surface_line_width = 0.4
+cool_fan_speed_min = 50
+retraction_combing = All
+adhesion_type = brim
+cool_min_layer_time = 3
+infill_before_walls = False
+speed_layer_0 = 20
+brim_line_count = 20
+cool_lift_head = True
+raft_interface_line_width = 0.4
+cool_fan_speed_max = 100
+magic_mesh_surface_mode = False
+speed_print = 20
+shell_thickness = 1.05
+speed_wall_0 = 20
+material_flow = 100.0
+raft_surface_line_spacing = 3.0
+raft_margin = 5.0
+retraction_speed = 40.0
+layer_height_0 = 0.26
+material_bed_temperature = 70
+speed_wall_x = 30
+infill_overlap = 15
+speed_infill = 45
+skirt_minimal_length = 150.0
+speed_topbottom = 20
+skirt_gap = 3.0
+raft_base_line_width = 1.0
+machine_nozzle_size = 0.35
+

resources/profiles/ultimaker2+/cpe_0.6_normal.curaprofile

@@ -0,0 +1,49 @@
+[general]
+version = 1
+name = Normal Quality
+machine_type = Ultimaker 2+
+machine_variant = 0.6mm Nozzle
+material = CPE
+
+[settings]
+cool_fan_speed_min = 50
+retraction_hop = 0.0
+support_enable = False
+raft_airgap = 0.0
+raft_surface_thickness = 0.27
+raft_interface_line_spacing = 3.0
+skin_no_small_gaps_heuristic = False
+bottom_thickness = 1.2
+support_pattern = lines
+retraction_combing = All
+adhesion_type = brim
+cool_min_layer_time = 3
+layer_height = 0.15
+speed_infill = 40
+speed_layer_0 = 20
+brim_line_count = 14
+cool_lift_head = True
+retraction_speed = 40.0
+cool_fan_speed_max = 100
+magic_mesh_surface_mode = False
+speed_print = 20
+shell_thickness = 1.59
+speed_wall_0 = 20
+material_flow = 100.0
+raft_surface_line_spacing = 3.0
+raft_margin = 5.0
+raft_interface_line_width = 0.4
+layer_height_0 = 0.39
+material_bed_temperature = 70
+top_thickness = 1.2
+top_bottom_thickness = 1.2
+speed_wall_x = 30
+infill_overlap = 17
+infill_before_walls = False
+raft_surface_line_width = 0.4
+skirt_minimal_length = 150.0
+speed_topbottom = 20
+skirt_gap = 3.0
+raft_base_line_width = 1.0
+machine_nozzle_size = 0.53
+

resources/profiles/ultimaker2+/cpe_0.8_fast.curaprofile

@@ -0,0 +1,49 @@
+[general]
+version = 1
+name = Fast Prints
+machine_type = Ultimaker 2+
+machine_variant = 0.8mm Nozzle
+material = CPE
+
+[settings]
+cool_fan_speed_min = 50
+retraction_hop = 0.0
+support_enable = False
+raft_airgap = 0.0
+raft_surface_thickness = 0.27
+raft_interface_line_spacing = 3.0
+skin_no_small_gaps_heuristic = False
+bottom_thickness = 1.2
+support_pattern = lines
+retraction_combing = All
+adhesion_type = brim
+cool_min_layer_time = 3
+layer_height = 0.2
+speed_infill = 40
+speed_layer_0 = 20
+brim_line_count = 10
+cool_lift_head = True
+retraction_speed = 40.0
+cool_fan_speed_max = 100
+magic_mesh_surface_mode = False
+speed_print = 20
+shell_thickness = 2.1
+speed_wall_0 = 20
+material_flow = 100.0
+raft_surface_line_spacing = 3.0
+raft_margin = 5.0
+raft_interface_line_width = 0.4
+layer_height_0 = 0.5
+material_bed_temperature = 70
+top_thickness = 1.2
+top_bottom_thickness = 1.2
+speed_wall_x = 30
+infill_overlap = 17
+infill_before_walls = False
+raft_surface_line_width = 0.4
+skirt_minimal_length = 150.0
+speed_topbottom = 20
+skirt_gap = 3.0
+raft_base_line_width = 1.0
+machine_nozzle_size = 0.7
+

resources/profiles/ultimaker2+/pla_0.25_high.curaprofile

@@ -0,0 +1,48 @@
+[general]
+version = 1
+name = High Quality
+machine_type = Ultimaker 2+
+machine_variant = 0.25mm Nozzle
+material = PLA
+
+[settings]
+retraction_combing = All
+top_thickness = 0.72
+speed_layer_0 = 20
+speed_print = 20
+speed_wall_0 = 20
+raft_interface_line_spacing = 3.0
+shell_thickness = 0.88
+infill_overlap = 15
+retraction_hop = 0.0
+material_bed_temperature = 70
+skin_no_small_gaps_heuristic = False
+retraction_speed = 40.0
+raft_surface_line_width = 0.4
+raft_base_line_width = 1.0
+raft_margin = 5.0
+adhesion_type = brim
+skirt_minimal_length = 150.0
+layer_height = 0.06
+brim_line_count = 36
+infill_before_walls = False
+raft_surface_thickness = 0.27
+raft_airgap = 0.0
+skirt_gap = 3.0
+raft_interface_line_width = 0.4
+speed_topbottom = 20
+support_pattern = lines
+layer_height_0 = 0.15
+infill_sparse_density = 22
+material_flow = 100.0
+cool_fan_speed_min = 100
+top_bottom_thickness = 0.72
+cool_fan_speed_max = 100
+speed_infill = 30
+magic_mesh_surface_mode = False
+bottom_thickness = 0.72
+speed_wall_x = 25
+machine_nozzle_size = 0.22
+raft_surface_line_spacing = 3.0
+support_enable = False
+

resources/profiles/ultimaker2+/pla_0.4_fast.curaprofile

@@ -0,0 +1,47 @@
+[general]
+version = 1
+name = Fast Prints
+machine_type = Ultimaker 2+
+machine_variant = 0.4mm Nozzle
+material = PLA
+
+[settings]
+retraction_combing = All
+top_thickness = 0.75
+speed_print = 40
+speed_wall_0 = 40
+raft_surface_line_spacing = 3.0
+shell_thickness = 0.7
+infill_sparse_density = 18
+retraction_hop = 0.0
+material_bed_temperature = 70
+skin_no_small_gaps_heuristic = False
+retraction_speed = 40.0
+raft_surface_line_width = 0.4
+raft_base_line_width = 1.0
+raft_margin = 5.0
+adhesion_type = brim
+skirt_minimal_length = 150.0
+layer_height = 0.15
+brim_line_count = 22
+infill_before_walls = False
+raft_surface_thickness = 0.27
+raft_airgap = 0.0
+infill_overlap = 15
+raft_interface_line_width = 0.4
+speed_topbottom = 30
+support_pattern = lines
+layer_height_0 = 0.26
+raft_interface_line_spacing = 3.0
+material_flow = 100.0
+cool_fan_speed_min = 100
+cool_fan_speed_max = 100
+speed_travel = 150
+skirt_gap = 3.0
+magic_mesh_surface_mode = False
+bottom_thickness = 0.75
+speed_wall_x = 50
+machine_nozzle_size = 0.35
+top_bottom_thickness = 0.75
+support_enable = False
+

resources/profiles/ultimaker2+/pla_0.4_high.curaprofile

@@ -0,0 +1,48 @@
+[general]
+version = 1
+name = High Quality
+machine_type = Ultimaker 2+
+machine_variant = 0.4mm Nozzle
+material = PLA
+
+[settings]
+retraction_combing = All
+top_thickness = 0.72
+speed_layer_0 = 20
+speed_print = 30
+speed_wall_0 = 30
+raft_interface_line_spacing = 3.0
+shell_thickness = 1.05
+infill_overlap = 15
+retraction_hop = 0.0
+material_bed_temperature = 70
+skin_no_small_gaps_heuristic = False
+retraction_speed = 40.0
+raft_surface_line_width = 0.4
+raft_base_line_width = 1.0
+raft_margin = 5.0
+adhesion_type = brim
+skirt_minimal_length = 150.0
+layer_height = 0.06
+brim_line_count = 22
+infill_before_walls = False
+raft_surface_thickness = 0.27
+raft_airgap = 0.0
+skirt_gap = 3.0
+raft_interface_line_width = 0.4
+speed_topbottom = 20
+support_pattern = lines
+layer_height_0 = 0.26
+infill_sparse_density = 22
+material_flow = 100.0
+cool_fan_speed_min = 100
+top_bottom_thickness = 0.72
+cool_fan_speed_max = 100
+speed_infill = 50
+magic_mesh_surface_mode = False
+bottom_thickness = 0.72
+speed_wall_x = 40
+machine_nozzle_size = 0.35
+raft_surface_line_spacing = 3.0
+support_enable = False
+

resources/profiles/ultimaker2+/pla_0.4_normal.curaprofile

@@ -0,0 +1,43 @@
+[general]
+version = 1
+name = Normal Quality
+machine_type = Ultimaker 2+
+machine_variant = 0.4mm Nozzle
+material = PLA
+
+[settings]
+retraction_combing = All
+shell_thickness = 1.05
+speed_print = 30
+speed_wall_0 = 30
+raft_interface_line_spacing = 3.0
+speed_layer_0 = 20
+layer_height_0 = 0.26
+retraction_hop = 0.0
+material_bed_temperature = 70
+skirt_gap = 3.0
+retraction_speed = 40.0
+raft_surface_line_width = 0.4
+raft_base_line_width = 1.0
+raft_margin = 5.0
+adhesion_type = brim
+skirt_minimal_length = 150.0
+brim_line_count = 22
+infill_before_walls = False
+raft_surface_thickness = 0.27
+raft_airgap = 0.0
+infill_overlap = 15
+raft_interface_line_width = 0.4
+speed_topbottom = 20
+support_pattern = lines
+speed_infill = 50
+material_flow = 100.0
+cool_fan_speed_min = 100
+cool_fan_speed_max = 100
+skin_no_small_gaps_heuristic = False
+magic_mesh_surface_mode = False
+speed_wall_x = 40
+machine_nozzle_size = 0.35
+raft_surface_line_spacing = 3.0
+support_enable = False
+

resources/profiles/ultimaker2+/pla_0.6_normal.curaprofile

@@ -0,0 +1,47 @@
+[general]
+version = 1
+name = Normal Quality
+machine_type = Ultimaker 2+
+machine_variant = 0.6mm Nozzle
+material = PLA
+
+[settings]
+retraction_combing = All
+top_thickness = 1.2
+speed_layer_0 = 20
+speed_print = 25
+speed_wall_0 = 25
+raft_interface_line_spacing = 3.0
+shell_thickness = 1.59
+infill_overlap = 15
+retraction_hop = 0.0
+material_bed_temperature = 70
+skin_no_small_gaps_heuristic = False
+retraction_speed = 40.0
+raft_surface_line_width = 0.4
+raft_base_line_width = 1.0
+raft_margin = 5.0
+adhesion_type = brim
+skirt_minimal_length = 150.0
+layer_height = 0.15
+brim_line_count = 15
+infill_before_walls = False
+raft_surface_thickness = 0.27
+raft_airgap = 0.0
+skirt_gap = 3.0
+raft_interface_line_width = 0.4
+speed_topbottom = 20
+support_pattern = lines
+layer_height_0 = 0.39
+material_flow = 100.0
+cool_fan_speed_min = 100
+top_bottom_thickness = 1.2
+cool_fan_speed_max = 100
+speed_infill = 55
+magic_mesh_surface_mode = False
+bottom_thickness = 1.2
+speed_wall_x = 40
+machine_nozzle_size = 0.53
+raft_surface_line_spacing = 3.0
+support_enable = False
+

resources/profiles/ultimaker2+/pla_0.8_fast.curaprofile

@@ -0,0 +1,47 @@
+[general]
+version = 1
+name = Fast Prints
+machine_type = Ultimaker 2+
+machine_variant = 0.8mm Nozzle
+material = PLA
+
+[settings]
+retraction_combing = All
+top_thickness = 1.2
+speed_layer_0 = 20
+speed_print = 20
+speed_wall_0 = 25
+raft_interface_line_spacing = 3.0
+shell_thickness = 2.1
+infill_overlap = 15
+retraction_hop = 0.0
+material_bed_temperature = 70
+skin_no_small_gaps_heuristic = False
+retraction_speed = 40.0
+raft_surface_line_width = 0.4
+raft_base_line_width = 1.0
+raft_margin = 5.0
+adhesion_type = brim
+skirt_minimal_length = 150.0
+layer_height = 0.2
+brim_line_count = 11
+infill_before_walls = False
+raft_surface_thickness = 0.27
+raft_airgap = 0.0
+skirt_gap = 3.0
+raft_interface_line_width = 0.4
+speed_topbottom = 20
+support_pattern = lines
+layer_height_0 = 0.5
+material_flow = 100.0
+cool_fan_speed_min = 100
+top_bottom_thickness = 1.2
+cool_fan_speed_max = 100
+speed_infill = 40
+magic_mesh_surface_mode = False
+bottom_thickness = 1.2
+speed_wall_x = 30
+machine_nozzle_size = 0.7
+raft_surface_line_spacing = 3.0
+support_enable = False
+