diff --git a/resources/definitions/fdmprinter.def.json b/resources/definitions/fdmprinter.def.json
index b223bbbfa8..c34216572d 100644
--- a/resources/definitions/fdmprinter.def.json
+++ b/resources/definitions/fdmprinter.def.json
@@ -3629,7 +3629,7 @@
                 "jerk_travel_enabled":
                 {
                     "label": "Enable Travel Jerk",
-                    "description": "Use a separate acceleration rate for travel moves. If disabled, travel moves will use the acceleration value of the printed line at their destination.",
+                    "description": "Use a separate jerk rate for travel moves. If disabled, travel moves will use the jerk value of the printed line at their destination.",
                     "type": "bool",
                     "default_value": true,
                     "resolve": "any(extruderValues('jerk_travel_enabled'))",
diff --git a/resources/variants/ultimaker_s3_dd04.inst.cfg b/resources/variants/ultimaker_s3_dd04.inst.cfg
new file mode 100644
index 0000000000..8d6e94905b
--- /dev/null
+++ b/resources/variants/ultimaker_s3_dd04.inst.cfg
@@ -0,0 +1,45 @@
+[general]
+name = DD 0.4
+version = 4
+definition = ultimaker_s3
+
+[metadata]
+setting_version = 20
+type = variant
+hardware_type = nozzle
+
+[values]
+brim_width = 7
+machine_nozzle_cool_down_speed = 0.9
+machine_nozzle_id = DD 0.4
+machine_nozzle_size = 0.4
+raft_acceleration = =acceleration_print
+raft_airgap = 0.3
+raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
+raft_interface_line_spacing = =raft_interface_line_width + 0.2
+raft_interface_line_width = =line_width * 2
+raft_interface_thickness = =layer_height * 1.5
+raft_jerk = =jerk_print
+raft_margin = 15
+raft_surface_layers = 2
+retraction_count_max = 25
+retraction_min_travel = =line_width * 2
+retraction_prime_speed = =retraction_speed
+speed_infill = =speed_print
+speed_layer_0 = 20
+speed_print = 45
+speed_support = =speed_topbottom
+speed_topbottom = =math.ceil(speed_print * 25 / 45)
+speed_travel_layer_0 = 50
+speed_wall = =math.ceil(speed_print * 30 / 45)
+speed_wall_0 = =math.ceil(speed_wall * 25 / 30)
+speed_wall_x = =speed_wall
+support_angle = 60
+support_bottom_distance = =support_z_distance / 2
+support_pattern = zigzag
+support_top_distance = =support_z_distance
+support_use_towers = True
+support_z_distance = =layer_height * 2
+switch_extruder_prime_speed = =switch_extruder_retraction_speeds
+switch_extruder_retraction_amount = =machine_heat_zone_length
+top_bottom_thickness = =layer_height * 6
diff --git a/resources/variants/ultimaker_s5_dd04.inst.cfg b/resources/variants/ultimaker_s5_dd04.inst.cfg
new file mode 100644
index 0000000000..97eef9fcb6
--- /dev/null
+++ b/resources/variants/ultimaker_s5_dd04.inst.cfg
@@ -0,0 +1,45 @@
+[general]
+name = DD 0.4
+version = 4
+definition = ultimaker_s5
+
+[metadata]
+setting_version = 20
+type = variant
+hardware_type = nozzle
+
+[values]
+brim_width = 7
+machine_nozzle_cool_down_speed = 0.9
+machine_nozzle_id = DD 0.4
+machine_nozzle_size = 0.4
+raft_acceleration = =acceleration_print
+raft_airgap = 0.3
+raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
+raft_interface_line_spacing = =raft_interface_line_width + 0.2
+raft_interface_line_width = =line_width * 2
+raft_interface_thickness = =layer_height * 1.5
+raft_jerk = =jerk_print
+raft_margin = 15
+raft_surface_layers = 2
+retraction_count_max = 25
+retraction_min_travel = =line_width * 2
+retraction_prime_speed = =retraction_speed
+speed_infill = =speed_print
+speed_layer_0 = 20
+speed_print = 45
+speed_support = =speed_topbottom
+speed_topbottom = =math.ceil(speed_print * 25 / 45)
+speed_travel_layer_0 = 50
+speed_wall = =math.ceil(speed_print * 30 / 45)
+speed_wall_0 = =math.ceil(speed_wall * 25 / 30)
+speed_wall_x = =speed_wall
+support_angle = 60
+support_bottom_distance = =support_z_distance / 2
+support_pattern = zigzag
+support_top_distance = =support_z_distance
+support_use_towers = True
+support_z_distance = =layer_height * 2
+switch_extruder_prime_speed = =switch_extruder_retraction_speeds
+switch_extruder_retraction_amount = =machine_heat_zone_length
+top_bottom_thickness = =layer_height * 6