diff --git a/resources/quality/ultimaker3/um3_aa0.25_ABS_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.25_ABS_Normal_Quality.inst.cfg
new file mode 100644
index 0000000000..5d798d556e
--- /dev/null
+++ b/resources/quality/ultimaker3/um3_aa0.25_ABS_Normal_Quality.inst.cfg
@@ -0,0 +1,24 @@
+[general]
+version = 2
+name = Fine
+definition = ultimaker3
+
+[metadata]
+type = quality
+quality_type = normal
+material = generic_abs_ultimaker3_AA_0.25
+weight = 0
+setting_version = 4
+
+[values]
+cool_fan_speed = 40
+infill_overlap = 15
+material_final_print_temperature = =material_print_temperature - 5
+prime_tower_enable = True
+prime_tower_purge_volume = 0.6
+prime_tower_size = 12
+prime_tower_wall_thickness = 0.9
+retraction_prime_speed = 25
+speed_topbottom = =math.ceil(speed_print * 30 / 55)
+wall_thickness = 0.92
+
diff --git a/resources/quality/ultimaker3/um3_aa0.25_CPE_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.25_CPE_Normal_Quality.inst.cfg
new file mode 100644
index 0000000000..a68b43fa2a
--- /dev/null
+++ b/resources/quality/ultimaker3/um3_aa0.25_CPE_Normal_Quality.inst.cfg
@@ -0,0 +1,22 @@
+[general]
+version = 2
+name = Fine
+definition = ultimaker3
+
+[metadata]
+type = quality
+quality_type = normal
+material = generic_cpe_ultimaker3_AA_0.25
+weight = 0
+setting_version = 4
+
+[values]
+infill_overlap = =10 if infill_sparse_density < 95 and infill_pattern != 'concentric' else 0
+prime_tower_size = 12
+prime_tower_wall_thickness = 0.9
+retraction_extrusion_window = 0.5
+speed_infill = 40
+speed_topbottom = =math.ceil(speed_print * 30 / 55)
+top_bottom_thickness = 0.8
+wall_thickness = 0.92
+
diff --git a/resources/quality/ultimaker3/um3_aa0.25_Nylon_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.25_Nylon_Normal_Quality.inst.cfg
new file mode 100644
index 0000000000..fda770266e
--- /dev/null
+++ b/resources/quality/ultimaker3/um3_aa0.25_Nylon_Normal_Quality.inst.cfg
@@ -0,0 +1,37 @@
+[general]
+version = 2
+name = Fine
+definition = ultimaker3
+
+[metadata]
+type = quality
+quality_type = normal
+material = generic_nylon_ultimaker3_AA_0.25
+weight = 0
+setting_version = 4
+
+[values]
+cool_min_layer_time_fan_speed_max = 20
+cool_min_speed = 12
+infill_line_width = =round(line_width * 0.5 / 0.4, 2)
+infill_overlap = =10 if infill_sparse_density < 95 and infill_pattern != 'concentric' else 0
+machine_nozzle_cool_down_speed = 0.9
+machine_nozzle_heat_up_speed = 2.0
+ooze_shield_angle = 40
+raft_acceleration = =acceleration_layer_0
+raft_airgap = =round(layer_height_0 * 0.85, 2)
+raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 3)
+raft_jerk = =jerk_layer_0
+raft_margin = 10
+raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2)
+retraction_extrusion_window = =retraction_amount
+retraction_min_travel = =line_width * 2
+skin_overlap = 50
+speed_print = 70
+speed_topbottom = =math.ceil(speed_print * 30 / 70)
+speed_wall = =math.ceil(speed_print * 30 / 70)
+switch_extruder_prime_speed = 30
+switch_extruder_retraction_amount = 30
+switch_extruder_retraction_speeds = 40
+wall_line_width_x = =wall_line_width
+
diff --git a/resources/quality/ultimaker3/um3_aa0.25_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.25_PC_Normal_Quality.inst.cfg
new file mode 100644
index 0000000000..43b8f95677
--- /dev/null
+++ b/resources/quality/ultimaker3/um3_aa0.25_PC_Normal_Quality.inst.cfg
@@ -0,0 +1,53 @@
+[general]
+version = 2
+name = Fine - Experimental
+definition = ultimaker3
+
+[metadata]
+type = quality
+quality_type = normal
+material = generic_pc_ultimaker3_AA_0.25
+weight = 0
+setting_version = 4
+
+[values]
+acceleration_enabled = True
+acceleration_print = 4000
+adhesion_type = brim
+brim_width = 20
+cool_fan_full_at_height = =layer_height_0 + layer_height
+cool_fan_speed_max = 50
+cool_min_layer_time_fan_speed_max = 5
+cool_min_speed = 5
+infill_line_width = =line_width
+infill_pattern = triangles
+infill_wipe_dist = 0.1
+jerk_enabled = True
+jerk_print = 25
+machine_min_cool_heat_time_window = 15
+multiple_mesh_overlap = 0
+ooze_shield_angle = 40
+prime_tower_enable = True
+retraction_count_max = 80
+retraction_hop = 2
+retraction_hop_enabled = True
+retraction_hop_only_when_collides = True
+retraction_min_travel = 0.8
+retraction_prime_speed = 15
+skin_overlap = 30
+speed_layer_0 = 25
+speed_print = 50
+speed_topbottom = 25
+speed_travel = 250
+speed_wall = =math.ceil(speed_print * 40 / 50)
+speed_wall_0 = =math.ceil(speed_wall * 25 / 40)
+support_bottom_distance = =support_z_distance
+support_interface_density = 87.5
+support_interface_pattern = lines
+switch_extruder_prime_speed = 15
+switch_extruder_retraction_amount = 20
+switch_extruder_retraction_speeds = 35
+wall_0_inset = 0
+wall_line_width_x = =line_width
+wall_thickness = 1.2
+
diff --git a/resources/quality/ultimaker3/um3_aa0.25_PLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.25_PLA_Normal_Quality.inst.cfg
new file mode 100644
index 0000000000..d3772448cf
--- /dev/null
+++ b/resources/quality/ultimaker3/um3_aa0.25_PLA_Normal_Quality.inst.cfg
@@ -0,0 +1,37 @@
+[general]
+version = 2
+name = Fine
+definition = ultimaker3
+
+[metadata]
+type = quality
+quality_type = normal
+material = generic_pla_ultimaker3_AA_0.25
+weight = 0
+setting_version = 4
+
+[values]
+brim_width = 8
+cool_fan_full_at_height = =layer_height_0
+cool_min_speed = 10
+infill_overlap = 10
+infill_pattern = grid
+machine_nozzle_cool_down_speed = 0.9
+machine_nozzle_heat_up_speed = 2.0
+material_final_print_temperature = =max(-273.15, material_print_temperature - 15)
+material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
+material_print_temperature = 190
+retraction_extrusion_window = =retraction_amount
+retraction_hop = 0.2
+skin_overlap = 5
+speed_layer_0 = 30
+speed_print = 30
+speed_travel_layer_0 = 120
+speed_wall = 25
+speed_wall_0 = 20
+top_bottom_thickness = 0.72
+travel_avoid_distance = 0.4
+wall_0_inset = 0.015
+wall_0_wipe_dist = 0.25
+wall_thickness = 0.7
+
diff --git a/resources/quality/ultimaker3/um3_aa0.25_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.25_PP_Normal_Quality.inst.cfg
new file mode 100644
index 0000000000..7f138f979d
--- /dev/null
+++ b/resources/quality/ultimaker3/um3_aa0.25_PP_Normal_Quality.inst.cfg
@@ -0,0 +1,60 @@
+[general]
+version = 2
+name = Fine - Experimental
+definition = ultimaker3
+
+[metadata]
+type = quality
+quality_type = normal
+material = generic_pp_ultimaker3_AA_0.25
+weight = 0
+setting_version = 4
+
+[values]
+acceleration_enabled = True
+acceleration_print = 4000
+brim_width = 10
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 5
+cool_min_speed = 2.5
+infill_line_width = =round(line_width * 0.38 / 0.38, 2)
+infill_pattern = tetrahedral
+infill_wipe_dist = 0.1
+jerk_enabled = True
+jerk_print = 25
+line_width = =machine_nozzle_size * 0.92
+machine_min_cool_heat_time_window = 15
+material_bed_temperature_layer_0 = 90
+material_final_print_temperature = 195
+material_initial_print_temperature = 200
+material_print_temperature = 205
+material_print_temperature_layer_0 = 208
+multiple_mesh_overlap = 0
+prime_tower_enable = False
+prime_tower_size = 16
+prime_tower_wipe_enabled = True
+retraction_count_max = 6
+retraction_extra_prime_amount = 0.2
+retraction_extrusion_window = 6.5
+retraction_hop = 2
+retraction_hop_enabled = True
+retraction_hop_only_when_collides = True
+retraction_min_travel = 0.8
+retraction_prime_speed = 13
+speed_equalize_flow_enabled = True
+speed_layer_0 = 15
+speed_print = 25
+speed_travel = 300
+speed_travel_layer_0 = 50
+speed_wall = =math.ceil(speed_print * 25 / 25)
+speed_wall_0 = =math.ceil(speed_wall * 25 / 25)
+support_angle = 50
+switch_extruder_prime_speed = 15
+switch_extruder_retraction_amount = 20
+switch_extruder_retraction_speeds = 35
+top_bottom_thickness = 1
+travel_avoid_distance = 3
+wall_0_inset = 0
+wall_line_width_x = =line_width
+wall_thickness = =line_width * 3
+
diff --git a/resources/quality/ultimaker3/um3_aa0.4_BAM_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_BAM_Draft_Print.inst.cfg
new file mode 100644
index 0000000000..980da522c8
--- /dev/null
+++ b/resources/quality/ultimaker3/um3_aa0.4_BAM_Draft_Print.inst.cfg
@@ -0,0 +1,38 @@
+[general]
+version = 2
+name = Fast
+definition = ultimaker3
+
+[metadata]
+type = quality
+quality_type = draft
+material = generic_bam_ultimaker3_AA_0.4
+weight = -2
+setting_version = 4
+
+[values]
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_print_temperature = =230
+material_standby_temperature = 100
+# prime_tower_enable: see CURA-4248
+prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100
+skin_overlap = 20
+speed_layer_0 = 20
+speed_topbottom = =math.ceil(speed_print * 35 / 70)
+speed_wall = =math.ceil(speed_print * 50 / 70)
+speed_wall_0 = =math.ceil(speed_wall * 35 / 50)
+top_bottom_thickness = 1
+wall_thickness = 1
+support_interface_enable = True
+support_interface_density = =min(extruderValues('material_surface_energy'))
+support_interface_pattern = ='lines' if support_interface_density < 100 else 'concentric'
+support_top_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height
+support_bottom_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height
+support_angle = 45
+support_join_distance = 5
+support_offset = 2
+support_pattern = triangles
+support_infill_rate = 10
diff --git a/resources/quality/ultimaker3/um3_aa0.4_BAM_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_BAM_Fast_Print.inst.cfg
new file mode 100644
index 0000000000..86b584c9af
--- /dev/null
+++ b/resources/quality/ultimaker3/um3_aa0.4_BAM_Fast_Print.inst.cfg
@@ -0,0 +1,38 @@
+[general]
+version = 2
+name = Normal
+definition = ultimaker3
+
+[metadata]
+type = quality
+quality_type = fast
+material = generic_bam_ultimaker3_AA_0.4
+weight = -1
+setting_version = 4
+
+[values]
+default_material_print_temperature = 225
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+# prime_tower_enable: see CURA-4248
+prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100
+speed_print = 80
+speed_layer_0 = 20
+speed_topbottom = =math.ceil(speed_print * 30 / 80)
+speed_wall = =math.ceil(speed_print * 40 / 80)
+speed_wall_0 = =math.ceil(speed_wall * 30 / 40)
+top_bottom_thickness = 1
+wall_thickness = 1
+support_interface_enable = True
+support_interface_density = =min(extruderValues('material_surface_energy'))
+support_interface_pattern = ='lines' if support_interface_density < 100 else 'concentric'
+support_top_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 1) * layer_height
+support_bottom_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height
+support_angle = 45
+support_join_distance = 5
+support_offset = 2
+support_pattern = triangles
+support_infill_rate = 10
diff --git a/resources/quality/ultimaker3/um3_aa0.4_BAM_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_BAM_Normal_Quality.inst.cfg
new file mode 100644
index 0000000000..b9f35fcfa0
--- /dev/null
+++ b/resources/quality/ultimaker3/um3_aa0.4_BAM_Normal_Quality.inst.cfg
@@ -0,0 +1,36 @@
+[general]
+version = 2
+name = Fine
+definition = ultimaker3
+
+[metadata]
+type = quality
+quality_type = normal
+material = generic_bam_ultimaker3_AA_0.4
+weight = 0
+setting_version = 4
+
+[values]
+default_material_print_temperature = 225
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+# prime_tower_enable: see CURA-4248
+prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100
+skin_overlap = 10
+speed_layer_0 = 20
+top_bottom_thickness = 1
+wall_thickness = 1
+support_interface_enable = True
+support_interface_density = =min(extruderValues('material_surface_energy'))
+support_interface_pattern = ='lines' if support_interface_density < 100 else 'concentric'
+support_top_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 1) * layer_height
+support_bottom_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height
+support_angle = 45
+support_join_distance = 5
+support_offset = 2
+support_pattern = triangles
+support_infill_rate = 10
diff --git a/resources/variants/ultimaker3_aa0.25.inst.cfg b/resources/variants/ultimaker3_aa0.25.inst.cfg
new file mode 100644
index 0000000000..ebb584f674
--- /dev/null
+++ b/resources/variants/ultimaker3_aa0.25.inst.cfg
@@ -0,0 +1,40 @@
+[general]
+name = AA 0.25
+version = 2
+definition = ultimaker3
+
+[metadata]
+author = ultimaker
+type = variant
+setting_version = 4
+
+[values]
+brim_width = 7
+infill_line_width = 0.23
+infill_overlap = 0
+layer_height_0 = 0.17
+line_width = 0.23
+machine_nozzle_cool_down_speed = 0.85
+machine_nozzle_heat_up_speed = 1.5
+machine_nozzle_id = AA 0.25
+machine_nozzle_size = 0.25
+machine_nozzle_tip_outer_diameter = 0.65
+material_final_print_temperature = =material_print_temperature - 10
+material_initial_print_temperature = =material_print_temperature - 5
+raft_interface_thickness = =layer_height * 1.5
+retraction_count_max = 25
+retraction_extrusion_window = 1
+retraction_min_travel = 0.7
+skin_overlap = 15
+speed_layer_0 = 20
+speed_print = 55
+speed_topbottom = 20
+speed_wall = =math.ceil(speed_print * 30 / 55)
+support_angle = 60
+support_bottom_distance = =support_z_distance / 2
+support_top_distance = =support_z_distance
+support_z_distance = =layer_height * 2
+top_bottom_thickness = 1.2
+wall_line_width_x = 0.23
+wall_thickness = 1.3
+
diff --git a/resources/variants/ultimaker3_extended_aa0.25.inst.cfg b/resources/variants/ultimaker3_extended_aa0.25.inst.cfg
new file mode 100644
index 0000000000..631768346e
--- /dev/null
+++ b/resources/variants/ultimaker3_extended_aa0.25.inst.cfg
@@ -0,0 +1,40 @@
+[general]
+name = AA 0.25
+version = 2
+definition = ultimaker3_extended
+
+[metadata]
+author = ultimaker
+type = variant
+setting_version = 4
+
+[values]
+brim_width = 7
+infill_line_width = 0.23
+infill_overlap = 0
+layer_height_0 = 0.17
+line_width = 0.23
+machine_nozzle_cool_down_speed = 0.85
+machine_nozzle_heat_up_speed = 1.5
+machine_nozzle_id = AA 0.25
+machine_nozzle_size = 0.25
+machine_nozzle_tip_outer_diameter = 0.65
+material_final_print_temperature = =material_print_temperature - 10
+material_initial_print_temperature = =material_print_temperature - 5
+raft_interface_thickness = =layer_height * 1.5
+retraction_count_max = 25
+retraction_extrusion_window = 1
+retraction_min_travel = 0.7
+skin_overlap = 15
+speed_layer_0 = 20
+speed_print = 55
+speed_topbottom = 20
+speed_wall = =math.ceil(speed_print * 30 / 55)
+support_angle = 60
+support_bottom_distance = =support_z_distance / 2
+support_top_distance = =support_z_distance
+support_z_distance = =layer_height * 2
+top_bottom_thickness = 1.2
+wall_line_width_x = 0.23
+wall_thickness = 1.3
+