Merge branch 'master' into CURA-4708_fix_definition_changes_extruder_stacks

cmake/CuraTests.cmake

@@ -24,16 +24,23 @@ function(cura_add_test)
     
     if(WIN32)
         string(REPLACE "|" "\\;" _PYTHONPATH ${_PYTHONPATH})
+        set(_PYTHONPATH "${_PYTHONPATH}\\;$ENV{PYTHONPATH}")
     else()
         string(REPLACE "|" ":" _PYTHONPATH ${_PYTHONPATH})
+        set(_PYTHONPATH "${_PYTHONPATH}:$ENV{PYTHONPATH}")
     endif()
 
+    get_test_property(${_NAME} ENVIRONMENT test_exists) #Find out if the test exists by getting a property from it that always exists (such as ENVIRONMENT because we set that ourselves).
+    if (NOT ${test_exists})
         add_test(
             NAME ${_NAME}
             COMMAND ${PYTHON_EXECUTABLE} -m pytest --junitxml=${CMAKE_BINARY_DIR}/junit-${_NAME}.xml ${_DIRECTORY}
         )
         set_tests_properties(${_NAME} PROPERTIES ENVIRONMENT LANG=C)
         set_tests_properties(${_NAME} PROPERTIES ENVIRONMENT "PYTHONPATH=${_PYTHONPATH}")
+    else()
+        message(WARNING "Duplicate test ${_NAME}!")
+    endif()
 endfunction()
 
 cura_add_test(NAME pytest-main DIRECTORY ${CMAKE_SOURCE_DIR}/tests PYTHONPATH "${CMAKE_SOURCE_DIR}|${URANIUM_DIR}")

cura/CuraApplication.py

@@ -316,7 +316,7 @@ class CuraApplication(QtApplication):
         preferences.addPreference("cura/material_settings", "{}")
 
         preferences.addPreference("view/invert_zoom", False)
-        preferences.addPreference("cura/sidebar_collapse", False)
+        preferences.addPreference("cura/sidebar_collapsed", False)
 
         self._need_to_show_user_agreement = not Preferences.getInstance().getValue("general/accepted_user_agreement")
 
@@ -1387,7 +1387,7 @@ class CuraApplication(QtApplication):
 
             if node.callDecoration("isSliceable"):
                 # Only check position if it's not already blatantly obvious that it won't fit.
-                if node.getBoundingBox().width < self._volume.getBoundingBox().width or node.getBoundingBox().depth < self._volume.getBoundingBox().depth:
+                if node.getBoundingBox() is None or self._volume.getBoundingBox() is None or node.getBoundingBox().width < self._volume.getBoundingBox().width or node.getBoundingBox().depth < self._volume.getBoundingBox().depth:
                     # Find node location
                     offset_shape_arr, hull_shape_arr = ShapeArray.fromNode(node, min_offset = min_offset)
 

cura/PlatformPhysics.py

@@ -135,9 +135,9 @@ class PlatformPhysics:
                                     # if the distance between two models less than 2mm then try to find a new factor
                                     if abs(temp_move_vector.x - overlap[0]) < self._minimum_gap and abs(temp_move_vector.y - overlap[1]) < self._minimum_gap:
                                         temp_scale_factor = self._move_factor
-                                        temp_x_factor = (abs(overlap[0]) + self._minimum_gap) / overlap[0] # find x move_factor, like (3.4 + 2) / 3.4 = 1.58
-                                        temp_y_factor = (abs(overlap[1]) + self._minimum_gap) / overlap[1] # find y move_factor
-                                        if temp_x_factor > temp_y_factor:
+                                        temp_x_factor = (abs(overlap[0]) + self._minimum_gap) / overlap[0] if overlap[0] != 0 else 0 # find x move_factor, like (3.4 + 2) / 3.4 = 1.58
+                                        temp_y_factor = (abs(overlap[1]) + self._minimum_gap) / overlap[1] if overlap[1] != 0 else 0 # find y move_factor
+                                        if abs(temp_x_factor) > abs(temp_y_factor):
                                             temp_scale_factor = temp_x_factor
                                         else:
                                             temp_scale_factor = temp_y_factor

cura/Settings/CuraContainerRegistry.py

@@ -225,7 +225,7 @@ class CuraContainerRegistry(ContainerRegistry):
                         # This is assumed to be the global profile
                         profile_id = (global_container_stack.getBottom().getId() + "_" + name_seed).lower().replace(" ", "_")
 
-                    elif len(machine_extruders) > profile_index:
+                    elif profile_index < len(machine_extruders) + 1:
                         # This is assumed to be an extruder profile
                         extruder_id = Application.getInstance().getMachineManager().getQualityDefinitionId(machine_extruders[profile_index - 1].getBottom())
                         if not profile.getMetaDataEntry("extruder"):

cura/ShapeArray.py

@@ -43,13 +43,12 @@ class ShapeArray:
         transform_x = transform._data[0][3]
         transform_y = transform._data[2][3]
         hull_verts = node.callDecoration("getConvexHull")
+        # If a model is too small then it will not contain any points
+        if hull_verts is None or not hull_verts.getPoints().any():
+            return None, None
         # For one_at_a_time printing you need the convex hull head.
         hull_head_verts = node.callDecoration("getConvexHullHead") or hull_verts
 
-        # If a model is to small then it will not contain any points
-        if not hull_verts.getPoints().any():
-            return None, None
-
         offset_verts = hull_head_verts.getMinkowskiHull(Polygon.approximatedCircle(min_offset))
         offset_points = copy.deepcopy(offset_verts._points)  # x, y
         offset_points[:, 0] = numpy.add(offset_points[:, 0], -transform_x)

plugins/CuraEngineBackend/StartSliceJob.py

@@ -143,10 +143,11 @@ class StartSliceJob(Job):
                         if per_object_stack:
                             is_non_printing_mesh = any(per_object_stack.getProperty(key, "value") for key in NON_PRINTING_MESH_SETTINGS)
 
-                        if not getattr(node, "_outside_buildarea", False) or not is_non_printing_mesh:
+                        if not getattr(node, "_outside_buildarea", False) or is_non_printing_mesh:
                             temp_list.append(node)
                             if not is_non_printing_mesh:
                                 has_printing_mesh = True
+
                     Job.yieldThread()
 
                 #If the list doesn't have any model with suitable settings then clean the list

plugins/VersionUpgrade/VersionUpgrade30to31/VersionUpgrade30to31.py

@@ -122,6 +122,26 @@ class VersionUpgrade30to31(VersionUpgrade):
             if len(all_quality_changes) <= 1 and not parser.has_option("metadata", "extruder"):
                 self._createExtruderQualityChangesForSingleExtrusionMachine(filename, parser)
 
+        if parser["metadata"]["type"] == "definition_changes":
+            if parser["general"]["definition"] == "custom":
+
+                # We are only interested in machine_nozzle_size
+                if parser.has_option("values", "machine_nozzle_size"):
+                    machine_nozzle_size = parser["values"]["machine_nozzle_size"]
+
+                    machine_extruder_count = '1' # by default it is 1 and the value cannot be stored in the global stack
+                    if parser.has_option("values", "machine_extruder_count"):
+                        machine_extruder_count = parser["values"]["machine_extruder_count"]
+
+                    if machine_extruder_count == '1':
+                        definition_name = parser["general"]["name"]
+                        machine_extruders = self._getSingleExtrusionMachineExtruders(definition_name)
+
+                        # For single extruder machine we need only first extruder
+                        if len(machine_extruders) != 0:
+                            self._updateSingleExtruderDefinitionFile(machine_extruders, machine_nozzle_size)
+                            parser.remove_option("values", "machine_nozzle_size")
+
         # Update version numbers
         parser["general"]["version"] = "2"
         parser["metadata"]["setting_version"] = "4"

resources/definitions/builder_premium_large.def.json

@@ -1,5 +1,4 @@
 {
-    "id": "builder_premium_large",
     "version": 2,
     "name": "Builder Premium Large",
     "inherits": "fdmprinter",

resources/definitions/builder_premium_medium.def.json

@@ -1,5 +1,4 @@
 {
-    "id": "builder_premium_medium",
     "version": 2,
     "name": "Builder Premium Medium",
     "inherits": "fdmprinter",

resources/definitions/builder_premium_small.def.json

@@ -1,5 +1,4 @@
 {
-    "id": "builder_premium_small",
     "version": 2,
     "name": "Builder Premium Small",
     "inherits": "fdmprinter",

resources/definitions/deltacomb.def.json

@@ -1,5 +1,4 @@
 {
-    "id": "deltacomb",
     "version": 2,
     "name": "Deltacomb 3D",
     "inherits": "fdmprinter",

resources/definitions/fdmprinter.def.json

@@ -1614,7 +1614,7 @@
                 "infill_overlap":
                 {
                     "label": "Infill Overlap Percentage",
-                    "description": "The amount of overlap between the infill and the walls. A slight overlap allows the walls to connect firmly to the infill.",
+                    "description": "The amount of overlap between the infill and the walls as a percentage of the infill line width. A slight overlap allows the walls to connect firmly to the infill.",
                     "unit": "%",
                     "type": "float",
                     "default_value": 10,
@@ -1644,7 +1644,7 @@
                 "skin_overlap":
                 {
                     "label": "Skin Overlap Percentage",
-                    "description": "The amount of overlap between the skin and the walls as a percentage of the line width. A slight overlap allows the walls to connect firmly to the skin. This is a percentage of the average line widths of the skin lines and the innermost wall.",
+                    "description": "The amount of overlap between the skin and the walls as a percentage of the skin line width. A slight overlap allows the walls to connect firmly to the skin. This is a percentage of the average line widths of the skin lines and the innermost wall.",
                     "unit": "%",
                     "type": "float",
                     "default_value": 5,

resources/i18n/pt_PT/fdmextruder.def.json.po

@@ -0,0 +1,210 @@
+# Cura JSON setting files
+# Copyright (C) 2017 Ultimaker
+# This file is distributed under the same license as the Cura package.
+# Ruben Dulek <r.dulek@ultimaker.com>, 2017.
+# 
+msgid ""
+msgstr ""
+"Project-Id-Version: Cura 3.1\n"
+"Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n"
+"POT-Creation-Date: 2017-08-02 16:53+0000\n"
+"PO-Revision-Date: 2017-12-07 13:41+0100\n"
+"Last-Translator: Bothof <info@bothof.nl>\n"
+"Language-Team: Bothof\n"
+"Language: pt_PT\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+#: fdmextruder.def.json
+msgctxt "machine_settings label"
+msgid "Machine"
+msgstr "Máquina"
+
+#: fdmextruder.def.json
+msgctxt "machine_settings description"
+msgid "Machine specific settings"
+msgstr "Definições específicas da máquina"
+
+#: fdmextruder.def.json
+msgctxt "extruder_nr label"
+msgid "Extruder"
+msgstr "Extrusora"
+
+#: fdmextruder.def.json
+msgctxt "extruder_nr description"
+msgid "The extruder train used for printing. This is used in multi-extrusion."
+msgstr "A máquina extrusora utilizada para imprimir. Esta é utilizada em extrusões múltiplas."
+
+#: fdmextruder.def.json
+msgctxt "machine_nozzle_id label"
+msgid "Nozzle ID"
+msgstr "ID do bocal"
+
+#: fdmextruder.def.json
+msgctxt "machine_nozzle_id description"
+msgid "The nozzle ID for an extruder train, such as \"AA 0.4\" and \"BB 0.8\"."
+msgstr "A ID do bocal para uma máquina de extrusão, tal como \"AA 0.4\" e \"BB 0.8\"."
+
+#: fdmextruder.def.json
+msgctxt "machine_nozzle_size label"
+msgid "Nozzle Diameter"
+msgstr "Diâmetro do bocal"
+
+#: fdmextruder.def.json
+msgctxt "machine_nozzle_size description"
+msgid ""
+"The inner diameter of the nozzle. Change this setting when using a non-"
+"standard nozzle size."
+msgstr "O diâmetro interno do bocal. Altere esta definição ao utilizar um tamanho de bocal não convencional."
+
+#: fdmextruder.def.json
+msgctxt "machine_nozzle_offset_x label"
+msgid "Nozzle X Offset"
+msgstr "Desvio X do bocal"
+
+#: fdmextruder.def.json
+msgctxt "machine_nozzle_offset_x description"
+msgid "The x-coordinate of the offset of the nozzle."
+msgstr "A coordenada X do desvio do bocal."
+
+#: fdmextruder.def.json
+msgctxt "machine_nozzle_offset_y label"
+msgid "Nozzle Y Offset"
+msgstr "Desvio Y do bocal"
+
+#: fdmextruder.def.json
+msgctxt "machine_nozzle_offset_y description"
+msgid "The y-coordinate of the offset of the nozzle."
+msgstr "A coordenada Y do desvio do bocal."
+
+#: fdmextruder.def.json
+msgctxt "machine_extruder_start_code label"
+msgid "Extruder Start G-Code"
+msgstr "G-Code inicial da extrusora"
+
+#: fdmextruder.def.json
+msgctxt "machine_extruder_start_code description"
+msgid "Start g-code to execute whenever turning the extruder on."
+msgstr "G-Code inicial a ser executado sempre que a extrusora for ligada."
+
+#: fdmextruder.def.json
+msgctxt "machine_extruder_start_pos_abs label"
+msgid "Extruder Start Position Absolute"
+msgstr "Posição inicial absoluta da extrusora"
+
+#: fdmextruder.def.json
+msgctxt "machine_extruder_start_pos_abs description"
+msgid ""
+"Make the extruder starting position absolute rather than relative to the "
+"last-known location of the head."
+msgstr "Torne a posição inicial da extrusora absoluta em vez de relativa à última posição conhecida da cabeça."
+
+#: fdmextruder.def.json
+msgctxt "machine_extruder_start_pos_x label"
+msgid "Extruder Start Position X"
+msgstr "X da posição inicial da extrusora"
+
+#: fdmextruder.def.json
+msgctxt "machine_extruder_start_pos_x description"
+msgid "The x-coordinate of the starting position when turning the extruder on."
+msgstr "A coordenada X da posição inicial ao ligar a extrusora."
+
+#: fdmextruder.def.json
+msgctxt "machine_extruder_start_pos_y label"
+msgid "Extruder Start Position Y"
+msgstr "Y da posição inicial da extrusora"
+
+#: fdmextruder.def.json
+msgctxt "machine_extruder_start_pos_y description"
+msgid "The y-coordinate of the starting position when turning the extruder on."
+msgstr "A coordenada Y da posição inicial ao ligar a extrusora."
+
+#: fdmextruder.def.json
+msgctxt "machine_extruder_end_code label"
+msgid "Extruder End G-Code"
+msgstr "G-Code final da extrusora"
+
+#: fdmextruder.def.json
+msgctxt "machine_extruder_end_code description"
+msgid "End g-code to execute whenever turning the extruder off."
+msgstr "G-Code final a ser executado sempre que a extrusora for desligada."
+
+#: fdmextruder.def.json
+msgctxt "machine_extruder_end_pos_abs label"
+msgid "Extruder End Position Absolute"
+msgstr "Posição final absoluta da extrusora"
+
+#: fdmextruder.def.json
+msgctxt "machine_extruder_end_pos_abs description"
+msgid ""
+"Make the extruder ending position absolute rather than relative to the last-"
+"known location of the head."
+msgstr "Torne a posição final da extrusora absoluta em vez de relativa à última localização conhecida da cabeça."
+
+#: fdmextruder.def.json
+msgctxt "machine_extruder_end_pos_x label"
+msgid "Extruder End Position X"
+msgstr "X da posição final da extrusora"
+
+#: fdmextruder.def.json
+msgctxt "machine_extruder_end_pos_x description"
+msgid "The x-coordinate of the ending position when turning the extruder off."
+msgstr "A coordenada X da posição final ao desligar a extrusora."
+
+#: fdmextruder.def.json
+msgctxt "machine_extruder_end_pos_y label"
+msgid "Extruder End Position Y"
+msgstr "Y da posição final da extrusora"
+
+#: fdmextruder.def.json
+msgctxt "machine_extruder_end_pos_y description"
+msgid "The y-coordinate of the ending position when turning the extruder off."
+msgstr "A coordenada Y da posição final ao desligar a extrusora."
+
+#: fdmextruder.def.json
+msgctxt "extruder_prime_pos_z label"
+msgid "Extruder Prime Z Position"
+msgstr "Posição Z de preparação da extrusora"
+
+#: fdmextruder.def.json
+msgctxt "extruder_prime_pos_z description"
+msgid ""
+"The Z coordinate of the position where the nozzle primes at the start of "
+"printing."
+msgstr "A coordenada Z da posição de preparação do bocal ao iniciar a impressão."
+
+#: fdmextruder.def.json
+msgctxt "platform_adhesion label"
+msgid "Build Plate Adhesion"
+msgstr "Aderência à placa de construção"
+
+#: fdmextruder.def.json
+msgctxt "platform_adhesion description"
+msgid "Adhesion"
+msgstr "Aderência"
+
+#: fdmextruder.def.json
+msgctxt "extruder_prime_pos_x label"
+msgid "Extruder Prime X Position"
+msgstr "Posição X de preparação da extrusora"
+
+#: fdmextruder.def.json
+msgctxt "extruder_prime_pos_x description"
+msgid ""
+"The X coordinate of the position where the nozzle primes at the start of "
+"printing."
+msgstr "A coordenada X da posição de preparação do bocal ao iniciar a impressão."
+
+#: fdmextruder.def.json
+msgctxt "extruder_prime_pos_y label"
+msgid "Extruder Prime Y Position"
+msgstr "Posição Y de preparação da extrusora"
+
+#: fdmextruder.def.json
+msgctxt "extruder_prime_pos_y description"
+msgid ""
+"The Y coordinate of the position where the nozzle primes at the start of "
+"printing."
+msgstr "A coordenada Y da posição de preparação do bocal ao iniciar a impressão."

resources/qml/AddMachineDialog.qml

@@ -1,4 +1,4 @@
-// Copyright (c) 2016 Ultimaker B.V.
+// Copyright (c) 2017 Ultimaker B.V.
 // Cura is released under the terms of the LGPLv3 or higher.
 
 import QtQuick 2.2
@@ -25,6 +25,15 @@ UM.Dialog
     width: minimumWidth
     height: minimumHeight
 
+    flags: {
+        var window_flags = Qt.Dialog | Qt.CustomizeWindowHint | Qt.WindowTitleHint;
+        if (Cura.MachineManager.activeDefinitionId !== "") //Disallow closing the window if we have no active printer yet. You MUST add a printer.
+        {
+            window_flags |= Qt.WindowCloseButtonHint;
+        }
+        return window_flags;
+    }
+
     onVisibilityChanged:
     {
         // Reset selection and machine name

resources/qml/Cura.qml

@@ -401,7 +401,7 @@ UM.MainWindow
                         collapseSidebarAnimation.start();
                     }
                     collapsed = !collapsed;
-                    UM.Preferences.setValue("cura/sidebar_collapse", collapsed);
+                    UM.Preferences.setValue("cura/sidebar_collapsed", collapsed);
                 }
 
                 anchors
@@ -432,9 +432,10 @@ UM.MainWindow
 
                 Component.onCompleted:
                 {
-                    var sidebarCollapsed = UM.Preferences.getValue("cura/sidebar_collapse");
+                    var sidebar_collapsed = UM.Preferences.getValue("cura/sidebar_collapsed");
 
-                    if (sidebarCollapsed) {
+                    if (sidebar_collapsed)
+                    {
                         sidebar.collapsed = true;
                         viewportRect = Qt.rect(0, 0, 1, 1.0)
                         collapseSidebarAnimation.start();

resources/qml/MonitorButton.qml

@@ -199,12 +199,12 @@ Item
         }
 
         Component.onCompleted: {
-            updateAdditionalComponents("monitorButtons")
+            buttonsRow.updateAdditionalComponents("monitorButtons")
         }
 
         Connections {
             target: CuraApplication
-            onAdditionalComponentsChanged: updateAdditionalComponents
+            onAdditionalComponentsChanged: buttonsRow.updateAdditionalComponents("monitorButtons")
         }
 
         function updateAdditionalComponents (areaId) {

resources/qml/Preferences/GeneralPage.qml

@@ -159,6 +159,7 @@ UM.PreferencesPage
                             append({ text: "Nederlands", code: "nl_NL" })
                             append({ text: "Polski", code: "pl_PL" })
                             append({ text: "Português do Brasil", code: "pt_BR" })
+                            append({ text: "Português", code: "pt_PT" })
                             append({ text: "Русский", code: "ru_RU" })
                             append({ text: "Türkçe", code: "tr_TR" })
                             append({ text: "简体中文", code: "zh_CN" })

resources/qml/SaveButton.qml

@@ -138,12 +138,12 @@ Item {
         }
 
         Component.onCompleted: {
-            addAdditionalComponents("saveButton")
+            saveRow.addAdditionalComponents("saveButton")
         }
 
         Connections {
             target: CuraApplication
-            onAdditionalComponentsChanged: addAdditionalComponents
+            onAdditionalComponentsChanged: saveRow.addAdditionalComponents("saveButton")
         }
 
         function addAdditionalComponents (areaId) {

resources/qml/Settings/SettingCategory.qml

@@ -1,5 +1,5 @@
-// Copyright (c) 2015 Ultimaker B.V.
-// Uranium is released under the terms of the LGPLv3 or higher.
+// Copyright (c) 2017 Ultimaker B.V.
+// Cura is released under the terms of the LGPLv3 or higher.
 
 import QtQuick 2.2
 import QtQuick.Controls 1.1
@@ -31,13 +31,17 @@ Button {
 
     onClicked:
     {
-        forceActiveFocus();
         if(definition.expanded)
         {
             settingDefinitionsModel.collapse(definition.key);
-        } else {
+        }
+        else
+        {
             settingDefinitionsModel.expandAll(definition.key);
         }
+        //Set focus so that tab navigation continues from this point on.
+        //NB: This must be set AFTER collapsing/expanding the category so that the scroll position is correct.
+        forceActiveFocus();
     }
     onActiveFocusChanged:
     {

resources/qml/Settings/SettingItem.qml

@@ -1,5 +1,5 @@
-// Copyright (c) 2015 Ultimaker B.V.
-// Uranium is released under the terms of the LGPLv3 or higher.
+// Copyright (c) 2017 Ultimaker B.V.
+// Cura is released under the terms of the LGPLv3 or higher.
 
 import QtQuick 2.1
 import QtQuick.Layouts 1.1
@@ -154,7 +154,7 @@ Item {
 
                 onEntered: {
                     hoverTimer.stop();
-                    var tooltipText = catalog.i18nc("@label", "This setting is always shared between all extruders. Changing it here will change the value for all extruders") + ".";
+                    var tooltipText = catalog.i18nc("@label", "This setting is always shared between all extruders. Changing it here will change the value for all extruders.");
                     if ((resolve != "None") && (stackLevel != 0)) {
                         // We come here if a setting has a resolve and the setting is not manually edited.
                         tooltipText += " " + catalog.i18nc("@label", "The value is resolved from per-extruder values ") + "[" + Cura.ExtruderManager.getInstanceExtruderValues(definition.key) + "].";

resources/qml/Topbar.qml

@@ -25,9 +25,12 @@ Rectangle
     property int allItemsWidth: 0;
 
     function updateMarginsAndSizes() {
-        if (UM.Preferences.getValue("cura/sidebar_collapse")) {
+        if (UM.Preferences.getValue("cura/sidebar_collapsed"))
+        {
             rightMargin = UM.Theme.getSize("default_margin").width;
-        } else {
+        }
+        else
+        {
             rightMargin = UM.Theme.getSize("sidebar").width + UM.Theme.getSize("default_margin").width;
         }
         allItemsWidth = (

resources/themes/cura-light/styles.qml

@@ -202,9 +202,8 @@ QtObject {
                     height: Theme.getSize("topbar_button_icon").height
                     Label
                     {
+                        id: button_label
                         text: control.text;
-                        anchors.right: (icon.visible || overlayIcon.visible) ? icon.left : parent.right
-                        anchors.rightMargin: (icon.visible || overlayIcon.visible) ? Theme.getSize("default_margin").width : 0
                         anchors.verticalCenter: parent.verticalCenter;
                         font: control.checked ? UM.Theme.getFont("large") : UM.Theme.getFont("large_nonbold")
                         color:
@@ -227,6 +226,8 @@ QtObject {
                     {
                         visible: control.iconSource != ""
                         id: icon
+                        anchors.left: button_label.right
+                        anchors.leftMargin: (icon.visible || overlayIcon.visible) ? Theme.getSize("default_margin").width : 0
                         color: UM.Theme.getColor("text_emphasis")
                         opacity: !control.enabled ? 0.2 : 1.0
                         source: control.iconSource
@@ -238,6 +239,8 @@ QtObject {
                     UM.RecolorImage
                     {
                         id: overlayIcon
+                        anchors.left: button_label.right
+                        anchors.leftMargin: (icon.visible || overlayIcon.visible) ? Theme.getSize("default_margin").width : 0
                         visible: control.overlayIconSource != "" && control.iconSource != ""
                         color: control.overlayColor
                         opacity: !control.enabled ? 0.2 : 1.0