Merge branch 'master' into feature_preheat_extruder

cura/CuraActions.py

@@ -73,7 +73,7 @@ class CuraActions(QObject):
     #   \param count The number of times to multiply the selection.
     @pyqtSlot(int)
     def multiplySelection(self, count: int) -> None:
-        job = MultiplyObjectsJob(Selection.getAllSelectedObjects(), count, 8)
+        job = MultiplyObjectsJob(Selection.getAllSelectedObjects(), count, min_offset = 8)
         job.start()
 
     ##  Delete all selected objects.

cura/CuraApplication.py

@@ -266,6 +266,7 @@ class CuraApplication(QtApplication):
         self.getController().getScene().sceneChanged.connect(self.updatePlatformActivity)
         self.getController().toolOperationStopped.connect(self._onToolOperationStopped)
         self.getController().contextMenuRequested.connect(self._onContextMenuRequested)
+        self.getCuraSceneController().activeBuildPlateChanged.connect(self.updatePlatformActivity)
 
         Resources.addType(self.ResourceTypes.QmlFiles, "qml")
         Resources.addType(self.ResourceTypes.Firmware, "firmware")
@@ -298,6 +299,7 @@ class CuraApplication(QtApplication):
         empty_quality_changes_container = copy.deepcopy(empty_container)
         empty_quality_changes_container.setMetaDataEntry("id", "empty_quality_changes")
         empty_quality_changes_container.addMetaDataEntry("type", "quality_changes")
+        empty_quality_changes_container.addMetaDataEntry("quality_type", "not_supported")
         ContainerRegistry.getInstance().addContainer(empty_quality_changes_container)
 
         with ContainerRegistry.getInstance().lockFile():
@@ -804,6 +806,7 @@ class CuraApplication(QtApplication):
 
         qmlRegisterUncreatableType(CuraApplication, "Cura", 1, 0, "ResourceTypes", "Just an Enum type")
 
+        qmlRegisterType(InstanceContainer, "Cura", 1, 0, "InstanceContainer")
         qmlRegisterType(ExtrudersModel, "Cura", 1, 0, "ExtrudersModel")
         qmlRegisterType(ContainerSettingsModel, "Cura", 1, 0, "ContainerSettingsModel")
         qmlRegisterSingletonType(ProfilesModel, "Cura", 1, 0, "ProfilesModel", ProfilesModel.createProfilesModel)
@@ -890,12 +893,18 @@ class CuraApplication(QtApplication):
     def getSceneBoundingBoxString(self):
         return self._i18n_catalog.i18nc("@info 'width', 'depth' and 'height' are variable names that must NOT be translated; just translate the format of ##x##x## mm.", "%(width).1f x %(depth).1f x %(height).1f mm") % {'width' : self._scene_bounding_box.width.item(), 'depth': self._scene_bounding_box.depth.item(), 'height' : self._scene_bounding_box.height.item()}
 
+    ##  Update scene bounding box for current build plate
     def updatePlatformActivity(self, node = None):
         count = 0
         scene_bounding_box = None
         is_block_slicing_node = False
+        active_build_plate = self.getBuildPlateModel().activeBuildPlate
         for node in DepthFirstIterator(self.getController().getScene().getRoot()):
-            if not issubclass(type(node), SceneNode) or (not node.getMeshData() and not node.callDecoration("getLayerData")):
+            if (
+                not issubclass(type(node), CuraSceneNode) or
+                (not node.getMeshData() and not node.callDecoration("getLayerData")) or
+                (node.callDecoration("getBuildPlateNumber") != active_build_plate)):
+
                 continue
             if node.callDecoration("isBlockSlicing"):
                 is_block_slicing_node = True
@@ -915,7 +924,7 @@ class CuraApplication(QtApplication):
         if not scene_bounding_box:
             scene_bounding_box = AxisAlignedBox.Null
 
-        if repr(self._scene_bounding_box) != repr(scene_bounding_box) and scene_bounding_box.isValid():
+        if repr(self._scene_bounding_box) != repr(scene_bounding_box):
             self._scene_bounding_box = scene_bounding_box
             self.sceneBoundingBoxChanged.emit()
 
@@ -1012,7 +1021,7 @@ class CuraApplication(QtApplication):
 
         Selection.clear()
         for node in DepthFirstIterator(self.getController().getScene().getRoot()):
-            if not issubclass(type(node), SceneNode):
+            if not isinstance(node, SceneNode):
                 continue
             if not node.getMeshData() and not node.callDecoration("isGroup"):
                 continue  # Node that doesnt have a mesh and is not a group.
@@ -1034,10 +1043,12 @@ class CuraApplication(QtApplication):
 
         nodes = []
         for node in DepthFirstIterator(self.getController().getScene().getRoot()):
-            if type(node) not in {SceneNode, CuraSceneNode}:
+            if not isinstance(node, SceneNode):
                 continue
             if (not node.getMeshData() and not node.callDecoration("getLayerData")) and not node.callDecoration("isGroup"):
                 continue  # Node that doesnt have a mesh and is not a group.
+            if not node.isSelectable():
+                continue  # Only remove nodes that are selectable.
             if node.getParent() and node.getParent().callDecoration("isGroup"):
                 continue  # Grouped nodes don't need resetting as their parent (the group) is resetted)
             nodes.append(node)
@@ -1050,7 +1061,12 @@ class CuraApplication(QtApplication):
             op.push()
             Selection.clear()
 
-        self.getCuraSceneController().setActiveBuildPlate(0)  # Select first build plate
+        # Reset the print information:
+        self.getController().getScene().sceneChanged.emit(node)
+        # self._print_information.setToZeroPrintInformation(self.getBuildPlateModel().activeBuildPlate)
+
+        # stay on the same build plate
+        #self.getCuraSceneController().setActiveBuildPlate(0)  # Select first build plate
 
     ## Reset all translation on nodes with mesh data.
     @pyqtSlot()
@@ -1058,7 +1074,7 @@ class CuraApplication(QtApplication):
         Logger.log("i", "Resetting all scene translations")
         nodes = []
         for node in DepthFirstIterator(self.getController().getScene().getRoot()):
-            if not issubclass(type(node), SceneNode):
+            if not isinstance(node, SceneNode):
                 continue
             if not node.getMeshData() and not node.callDecoration("isGroup"):
                 continue  # Node that doesnt have a mesh and is not a group.
@@ -1086,7 +1102,7 @@ class CuraApplication(QtApplication):
         Logger.log("i", "Resetting all scene transformations")
         nodes = []
         for node in DepthFirstIterator(self.getController().getScene().getRoot()):
-            if not issubclass(type(node), SceneNode):
+            if not isinstance(node, SceneNode):
                 continue
             if not node.getMeshData() and not node.callDecoration("isGroup"):
                 continue  # Node that doesnt have a mesh and is not a group.
@@ -1113,7 +1129,7 @@ class CuraApplication(QtApplication):
     def arrangeObjectsToAllBuildPlates(self):
         nodes = []
         for node in DepthFirstIterator(self.getController().getScene().getRoot()):
-            if not issubclass(type(node), SceneNode):
+            if not isinstance(node, SceneNode):
                 continue
             if not node.getMeshData() and not node.callDecoration("isGroup"):
                 continue  # Node that doesnt have a mesh and is not a group.
@@ -1134,7 +1150,7 @@ class CuraApplication(QtApplication):
         nodes = []
         active_build_plate = self.getBuildPlateModel().activeBuildPlate
         for node in DepthFirstIterator(self.getController().getScene().getRoot()):
-            if not issubclass(type(node), SceneNode):
+            if not isinstance(node, SceneNode):
                 continue
             if not node.getMeshData() and not node.callDecoration("isGroup"):
                 continue  # Node that doesnt have a mesh and is not a group.
@@ -1158,7 +1174,7 @@ class CuraApplication(QtApplication):
         # What nodes are on the build plate and are not being moved
         fixed_nodes = []
         for node in DepthFirstIterator(self.getController().getScene().getRoot()):
-            if not issubclass(type(node), SceneNode):
+            if not isinstance(node, SceneNode):
                 continue
             if not node.getMeshData() and not node.callDecoration("isGroup"):
                 continue  # Node that doesnt have a mesh and is not a group.
@@ -1186,7 +1202,7 @@ class CuraApplication(QtApplication):
         Logger.log("i", "Reloading all loaded mesh data.")
         nodes = []
         for node in DepthFirstIterator(self.getController().getScene().getRoot()):
-            if not issubclass(type(node), SceneNode) or not node.getMeshData():
+            if not isinstance(node, SceneNode) or not node.getMeshData():
                 continue
 
             nodes.append(node)
@@ -1421,16 +1437,20 @@ class CuraApplication(QtApplication):
         filename = job.getFileName()
         self._currently_loading_files.remove(filename)
 
-        root = self.getController().getScene().getRoot()
-        arranger = Arrange.create(scene_root = root)
-        min_offset = 8
-
         self.fileLoaded.emit(filename)
         arrange_objects_on_load = (
             not Preferences.getInstance().getValue("cura/use_multi_build_plate") or
             not Preferences.getInstance().getValue("cura/not_arrange_objects_on_load"))
         target_build_plate = self.getBuildPlateModel().activeBuildPlate if arrange_objects_on_load else -1
 
+        root = self.getController().getScene().getRoot()
+        fixed_nodes = []
+        for node_ in DepthFirstIterator(root):
+            if node_.callDecoration("isSliceable") and node_.callDecoration("getBuildPlateNumber") == target_build_plate:
+                fixed_nodes.append(node_)
+        arranger = Arrange.create(fixed_nodes = fixed_nodes)
+        min_offset = 8
+
         for original_node in nodes:
 
             # Create a CuraSceneNode just if the original node is not that type
@@ -1442,11 +1462,7 @@ class CuraApplication(QtApplication):
 
             extension = os.path.splitext(filename)[1]
             if extension.lower() in self._non_sliceable_extensions:
-                self.getController().setActiveView("SimulationView")
-                view = self.getController().getActiveView()
-                view.resetLayerData()
-                view.setLayer(9999999)
-                view.calculateMaxLayers()
+                self.callLater(lambda: self.getController().setActiveView("SimulationView"))
 
                 block_slicing_decorator = BlockSlicingDecorator()
                 node.addDecorator(block_slicing_decorator)
@@ -1500,12 +1516,11 @@ class CuraApplication(QtApplication):
         """
         Checks if the given file URL is a valid project file.
         """
-        try:
         file_path = QUrl(file_url).toLocalFile()
         workspace_reader = self.getWorkspaceFileHandler().getReaderForFile(file_path)
         if workspace_reader is None:
             return False  # non-project files won't get a reader
-
+        try:
             result = workspace_reader.preRead(file_path, show_dialog=False)
             return result == WorkspaceReader.PreReadResult.accepted
         except Exception as e:

cura/ObjectsModel.py

@@ -28,7 +28,7 @@ class ObjectsModel(ListModel):
         active_build_plate_number = self._build_plate_number
         group_nr = 1
         for node in DepthFirstIterator(Application.getInstance().getController().getScene().getRoot()):
-            if not issubclass(type(node), SceneNode):
+            if not isinstance(node, SceneNode):
                 continue
             if (not node.getMeshData() and not node.callDecoration("getLayerData")) and not node.callDecoration("isGroup"):
                 continue

cura/PlatformPhysics.py

@@ -61,7 +61,7 @@ class PlatformPhysics:
 
         random.shuffle(nodes)
         for node in nodes:
-            if node is root or not issubclass(type(node), SceneNode) or node.getBoundingBox() is None:
+            if node is root or not isinstance(node, SceneNode) or node.getBoundingBox() is None:
                 continue
 
             bbox = node.getBoundingBox()

cura/PrintInformation.py

@@ -1,4 +1,4 @@
-# Copyright (c) 2017 Ultimaker B.V.
+# Copyright (c) 2018 Ultimaker B.V.
 # Cura is released under the terms of the LGPLv3 or higher.
 
 from PyQt5.QtCore import QObject, pyqtSignal, pyqtProperty
@@ -65,6 +65,7 @@ class PrintInformation(QObject):
         self._backend = Application.getInstance().getBackend()
         if self._backend:
             self._backend.printDurationMessage.connect(self._onPrintDurationMessage)
+        Application.getInstance().getController().getScene().sceneChanged.connect(self.setToZeroPrintInformation)
 
         self._base_name = ""
         self._abbr_machine = ""
@@ -171,7 +172,7 @@ class PrintInformation(QObject):
     def printTimes(self):
         return self._print_time_message_values[self._active_build_plate]
 
-    def _onPrintDurationMessage(self, build_plate_number, print_time, material_amounts):
+    def _onPrintDurationMessage(self, build_plate_number, print_time: Dict[str, int], material_amounts: list):
         self._updateTotalPrintTimePerFeature(build_plate_number, print_time)
         self.currentPrintTimeChanged.emit()
 

cura/PrinterOutputDevice.py

@@ -41,6 +41,9 @@ class PrinterOutputDevice(QObject, OutputDevice):
     # # Signal to indicate that the hotend of the active printer on the remote changed.
     hotendIdChanged = pyqtSignal()
 
+    # Signal to indicate that the info text about the connection has changed.
+    connectionTextChanged = pyqtSignal()
+
     def __init__(self, device_id, parent = None):
         super().__init__(device_id = device_id, parent = parent)
 
@@ -65,11 +68,21 @@ class PrinterOutputDevice(QObject, OutputDevice):
         self._connection_state = ConnectionState.closed
 
         self._address = ""
+        self._connection_text = ""
 
-    @pyqtProperty(str, constant = True)
+    @pyqtProperty(str, notify = connectionTextChanged)
     def address(self):
         return self._address
 
+    def setConnectionText(self, connection_text):
+        if self._connection_text != connection_text:
+            self._connection_text = connection_text
+            self.connectionTextChanged.emit()
+
+    @pyqtProperty(str, constant=True)
+    def connectionText(self):
+        return self._connection_text
+
     def materialHotendChangedMessage(self, callback):
         Logger.log("w", "materialHotendChangedMessage needs to be implemented, returning 'Yes'")
         callback(QMessageBox.Yes)
@@ -122,7 +135,6 @@ class PrinterOutputDevice(QObject, OutputDevice):
     def controlItem(self):
         if not self._control_component:
             self._createControlViewFromQML()
-
         return self._control_item
 
     def _createControlViewFromQML(self):

cura/Scene/BuildPlateDecorator.py

@@ -13,7 +13,7 @@ class BuildPlateDecorator(SceneNodeDecorator):
         # Make sure that groups are set correctly
         # setBuildPlateForSelection in CuraActions makes sure that no single childs are set.
         self._build_plate_number = nr
-        if issubclass(type(self._node), CuraSceneNode):
+        if isinstance(self._node, CuraSceneNode):
             self._node.transformChanged()  # trigger refresh node without introducing a new signal
         if self._node and self._node.callDecoration("isGroup"):
             for child in self._node.getChildren():

cura/Scene/ConvexHullNode.py

@@ -65,7 +65,7 @@ class ConvexHullNode(SceneNode):
             ConvexHullNode.shader.setUniformValue("u_opacity", 0.6)
 
         if self.getParent():
-            if self.getMeshData() and issubclass(type(self._node), SceneNode) and self._node.callDecoration("getBuildPlateNumber") == Application.getInstance().getBuildPlateModel().activeBuildPlate:
+            if self.getMeshData() and isinstance(self._node, SceneNode) and self._node.callDecoration("getBuildPlateNumber") == Application.getInstance().getBuildPlateModel().activeBuildPlate:
                 renderer.queueNode(self, transparent = True, shader = ConvexHullNode.shader, backface_cull = True, sort = -8)
                 if self._convex_hull_head_mesh:
                     renderer.queueNode(self, shader = ConvexHullNode.shader, transparent = True, mesh = self._convex_hull_head_mesh, backface_cull = True, sort = -8)

cura/Scene/CuraSceneController.py

@@ -10,9 +10,12 @@ from UM.Application import Application
 from UM.Scene.Iterator.DepthFirstIterator import DepthFirstIterator
 from UM.Scene.SceneNode import SceneNode
 from UM.Scene.Selection import Selection
+from UM.Signal import Signal
 
 
 class CuraSceneController(QObject):
+    activeBuildPlateChanged = Signal()
+
     def __init__(self, objects_model: ObjectsModel, build_plate_model: BuildPlateModel):
         super().__init__()
 
@@ -30,7 +33,7 @@ class CuraSceneController(QObject):
             source = args[0]
         else:
             source = None
-        if not issubclass(type(source), SceneNode):
+        if not isinstance(source, SceneNode):
             return
         max_build_plate = self._calcMaxBuildPlate()
         changed = False
@@ -101,6 +104,7 @@ class CuraSceneController(QObject):
 
         self._build_plate_model.setActiveBuildPlate(nr)
         self._objects_model.setActiveBuildPlate(nr)
+        self.activeBuildPlateChanged.emit()
 
     @staticmethod
     def createCuraSceneController():

cura/Settings/CuraContainerRegistry.py

@@ -94,7 +94,7 @@ class CuraContainerRegistry(ContainerRegistry):
     def _containerExists(self, container_type, container_name):
         container_class = ContainerStack if container_type == "machine" else InstanceContainer
 
-        return self.findContainersMetadata(id = container_name, type = container_type, ignore_case = True) or \
+        return self.findContainersMetadata(container_type = container_class, id = container_name, type = container_type, ignore_case = True) or \
                 self.findContainersMetadata(container_type = container_class, name = container_name, type = container_type)
 
     ##  Exports an profile to a file

cura/Settings/CuraContainerStack.py

@@ -144,7 +144,7 @@ class CuraContainerStack(ContainerStack):
 
     ##  Set the material container.
     #
-    #   \param new_quality_changes The new material container. It is expected to have a "type" metadata entry with the value "quality_changes".
+    #   \param new_material The new material container. It is expected to have a "type" metadata entry with the value "material".
     def setMaterial(self, new_material: InstanceContainer, postpone_emit = False) -> None:
         self.replaceContainer(_ContainerIndexes.Material, new_material, postpone_emit = postpone_emit)
 
@@ -155,7 +155,7 @@ class CuraContainerStack(ContainerStack):
     #   to whatever the machine definition specifies as "preferred" container, or a fallback value. See findDefaultMaterial
     #   for details.
     #
-    #   \param new_quality_changes_id The ID of the new material container.
+    #   \param new_material_id The ID of the new material container.
     #
     #   \throws Exceptions.InvalidContainerError Raised when no container could be found with the specified ID.
     def setMaterialById(self, new_material_id: str) -> None:
@@ -182,7 +182,7 @@ class CuraContainerStack(ContainerStack):
 
     ##  Set the variant container.
     #
-    #   \param new_quality_changes The new variant container. It is expected to have a "type" metadata entry with the value "quality_changes".
+    #   \param new_variant The new variant container. It is expected to have a "type" metadata entry with the value "variant".
     def setVariant(self, new_variant: InstanceContainer) -> None:
         self.replaceContainer(_ContainerIndexes.Variant, new_variant)
 
@@ -193,13 +193,13 @@ class CuraContainerStack(ContainerStack):
     #   to whatever the machine definition specifies as "preferred" container, or a fallback value. See findDefaultVariant
     #   for details.
     #
-    #   \param new_quality_changes_id The ID of the new variant container.
+    #   \param new_variant_id The ID of the new variant container.
     #
     #   \throws Exceptions.InvalidContainerError Raised when no container could be found with the specified ID.
     def setVariantById(self, new_variant_id: str) -> None:
         variant = self._empty_variant
         if new_variant_id == "default":
-            new_variant = self.findDefaultVariant()
+            new_variant = self.findDefaultVariantBuildplate() if self.getMetaDataEntry("type") == "machine" else self.findDefaultVariant()
             if new_variant:
                 variant = new_variant
         else:
@@ -220,13 +220,13 @@ class CuraContainerStack(ContainerStack):
 
     ##  Set the definition changes container.
     #
-    #   \param new_quality_changes The new definition changes container. It is expected to have a "type" metadata entry with the value "quality_changes".
+    #   \param new_definition_changes The new definition changes container. It is expected to have a "type" metadata entry with the value "definition_changes".
     def setDefinitionChanges(self, new_definition_changes: InstanceContainer) -> None:
         self.replaceContainer(_ContainerIndexes.DefinitionChanges, new_definition_changes)
 
     ##  Set the definition changes container by an ID.
     #
-    #   \param new_quality_changes_id The ID of the new definition changes container.
+    #   \param new_definition_changes_id The ID of the new definition changes container.
     #
     #   \throws Exceptions.InvalidContainerError Raised when no container could be found with the specified ID.
     def setDefinitionChangesById(self, new_definition_changes_id: str) -> None:
@@ -245,13 +245,13 @@ class CuraContainerStack(ContainerStack):
 
     ##  Set the definition container.
     #
-    #   \param new_quality_changes The new definition container. It is expected to have a "type" metadata entry with the value "quality_changes".
+    #   \param new_definition The new definition container. It is expected to have a "type" metadata entry with the value "definition".
     def setDefinition(self, new_definition: DefinitionContainerInterface) -> None:
         self.replaceContainer(_ContainerIndexes.Definition, new_definition)
 
     ##  Set the definition container by an ID.
     #
-    #   \param new_quality_changes_id The ID of the new definition container.
+    #   \param new_definition_id The ID of the new definition container.
     #
     #   \throws Exceptions.InvalidContainerError Raised when no container could be found with the specified ID.
     def setDefinitionById(self, new_definition_id: str) -> None:
@@ -435,6 +435,51 @@ class CuraContainerStack(ContainerStack):
         Logger.log("w", "Could not find a valid default variant for stack {stack}", stack = self.id)
         return None
 
+    ##  Find the global variant that should be used as "default". This is used for the buildplates.
+    #
+    #   This will search for variants that match the current definition and pick the preferred one,
+    #   if specified by the machine definition.
+    #
+    #   The following criteria are used to find the default global variant:
+    #   - If the machine definition does not have a metadata entry "has_variant_buildplates" set to True, return None
+    #   - The definition of the variant should be the same as the machine definition for this stack.
+    #   - The container should have a metadata entry "type" with value "variant" and "hardware_type" with value "buildplate".
+    #   - If the machine definition has a metadata entry "preferred_variant_buildplate", filter the variant IDs based on that.
+    #
+    #   \return The container that should be used as default, or None if nothing was found or the machine does not use variants.
+    #
+    #   \note This method assumes the stack has a valid machine definition.
+    def findDefaultVariantBuildplate(self) -> Optional[ContainerInterface]:
+        definition = self._getMachineDefinition()
+        # has_variant_buildplates can be overridden in other containers and stacks.
+        # In the case of UM2, it is overridden in the GlobalStack
+        if not self.getMetaDataEntry("has_variant_buildplates"):
+            # If the machine does not use variants, we should never set a variant.
+            return None
+
+        # First add any variant. Later, overwrite with preference if the preference is valid.
+        variant = None
+        definition_id = self._findInstanceContainerDefinitionId(definition)
+        variants = ContainerRegistry.getInstance().findInstanceContainers(definition = definition_id, type = "variant", hardware_type = "buildplate")
+        if variants:
+            variant = variants[0]
+
+        preferred_variant_buildplate_id = definition.getMetaDataEntry("preferred_variant_buildplate")
+        if preferred_variant_buildplate_id:
+            preferred_variant_buildplates = ContainerRegistry.getInstance().findInstanceContainers(id = preferred_variant_buildplate_id, definition = definition_id, type = "variant")
+            if preferred_variant_buildplates:
+                variant = preferred_variant_buildplates[0]
+            else:
+                Logger.log("w", "The preferred variant buildplate \"{variant}\" of stack {stack} does not exist or is not a variant.",
+                           variant = preferred_variant_buildplate_id, stack = self.id)
+                # And leave it at the default variant.
+
+        if variant:
+            return variant
+
+        Logger.log("w", "Could not find a valid default buildplate variant for stack {stack}", stack = self.id)
+        return None
+
     ##  Find the material that should be used as "default" material.
     #
     #   This will search for materials that match the current definition and pick the preferred one,

cura/Settings/ExtruderManager.py

@@ -49,6 +49,9 @@ class ExtruderManager(QObject):
     ##  Notify when the user switches the currently active extruder.
     activeExtruderChanged = pyqtSignal()
 
+    ## The signal notifies subscribers if extruders are added
+    extrudersAdded = pyqtSignal()
+
     ##  Gets the unique identifier of the currently active extruder stack.
     #
     #   The currently active extruder stack is the stack that is currently being
@@ -406,6 +409,7 @@ class ExtruderManager(QObject):
 
             if extruders_changed:
                 self.extrudersChanged.emit(global_stack_id)
+                self.extrudersAdded.emit()
                 self.setActiveExtruderIndex(0)
 
     ##  Get all extruder values for a certain setting.

cura/Settings/MachineManager.py

@@ -50,6 +50,7 @@ class MachineManager(QObject):
 
         # Used to store the new containers until after confirming the dialog
         self._new_variant_container = None
+        self._new_buildplate_container = None
         self._new_material_container = None
         self._new_quality_containers = []
 
@@ -157,6 +158,10 @@ class MachineManager(QObject):
     def newVariant(self):
         return self._new_variant_container
 
+    @property
+    def newBuildplate(self):
+        return self._new_buildplate_container
+
     @property
     def newMaterial(self):
         return self._new_material_container
@@ -309,9 +314,10 @@ class MachineManager(QObject):
             self._global_container_stack.containersChanged.connect(self._onInstanceContainersChanged)
             self._global_container_stack.propertyChanged.connect(self._onPropertyChanged)
 
-            # set the global variant to empty as we now use the extruder stack at all times - CURA-4482
+            # Global stack can have only a variant if it is a buildplate
             global_variant = self._global_container_stack.variant
             if global_variant != self._empty_variant_container:
+                if global_variant.getMetaDataEntry("hardware_type") != "buildplate":
                     self._global_container_stack.setVariant(self._empty_variant_container)
 
             # set the global material to empty as we now use the extruder stack at all times - CURA-4482
@@ -675,6 +681,14 @@ class MachineManager(QObject):
                 return quality.getId()
         return ""
 
+    @pyqtProperty(str, notify=activeVariantChanged)
+    def globalVariantId(self) -> str:
+        if self._global_container_stack:
+            variant = self._global_container_stack.variant
+            if variant and not isinstance(variant, type(self._empty_variant_container)):
+                return variant.getId()
+        return ""
+
     @pyqtProperty(str, notify = activeQualityChanged)
     def activeQualityType(self) -> str:
         if self._active_container_stack:
@@ -855,6 +869,24 @@ class MachineManager(QObject):
             else:
                 Logger.log("w", "While trying to set the active variant, no variant was found to replace.")
 
+    @pyqtSlot(str)
+    def setActiveVariantBuildplate(self, variant_buildplate_id: str):
+        with postponeSignals(*self._getContainerChangedSignals(), compress = CompressTechnique.CompressPerParameterValue):
+            containers = ContainerRegistry.getInstance().findInstanceContainers(id = variant_buildplate_id)
+            if not containers or not self._global_container_stack:
+                return
+            Logger.log("d", "Attempting to change the active buildplate to %s", variant_buildplate_id)
+            old_buildplate = self._global_container_stack.variant
+            if old_buildplate:
+                self.blurSettings.emit()
+                self._new_buildplate_container = containers[0]  # self._active_container_stack will be updated with a delay
+                Logger.log("d", "Active buildplate changed to {active_variant_buildplate_id}".format(active_variant_buildplate_id = containers[0].getId()))
+
+                # Force set the active quality as it is so the values are updated
+                self.setActiveMaterial(self._active_container_stack.material.getId())
+            else:
+                Logger.log("w", "While trying to set the active buildplate, no buildplate was found to replace.")
+
     ##  set the active quality
     #   \param quality_id The quality_id of either a quality or a quality_changes
     @pyqtSlot(str)
@@ -932,6 +964,10 @@ class MachineManager(QObject):
             self._active_container_stack.variant = self._new_variant_container
             self._new_variant_container = None
 
+        if self._new_buildplate_container is not None:
+            self._global_container_stack.variant = self._new_buildplate_container
+            self._new_buildplate_container = None
+
         if self._new_material_container is not None:
             self._active_container_stack.material = self._new_material_container
             self._new_material_container = None
@@ -952,6 +988,7 @@ class MachineManager(QObject):
     #   Used for ignoring any changes when switching between printers (setActiveMachine)
     def _cancelDelayedActiveContainerStackChanges(self):
         self._new_material_container = None
+        self._new_buildplate_container = None
         self._new_variant_container = None
 
     ##  Determine the quality and quality changes settings for the current machine for a quality name.
@@ -1116,6 +1153,15 @@ class MachineManager(QObject):
 
         return ""
 
+    @pyqtProperty(str, notify = activeVariantChanged)
+    def activeVariantBuildplateName(self) -> str:
+        if self._global_container_stack:
+            variant = self._global_container_stack.variant
+            if variant:
+                return variant.getName()
+
+        return ""
+
     @pyqtProperty(str, notify = globalContainerChanged)
     def activeDefinitionId(self) -> str:
         if self._global_container_stack:
@@ -1213,7 +1259,6 @@ class MachineManager(QObject):
     def hasMaterials(self) -> bool:
         if self._global_container_stack:
             return Util.parseBool(self._global_container_stack.getMetaDataEntry("has_materials", False))
-
         return False
 
     @pyqtProperty(bool, notify = globalContainerChanged)
@@ -1222,6 +1267,53 @@ class MachineManager(QObject):
             return Util.parseBool(self._global_container_stack.getMetaDataEntry("has_variants", False))
         return False
 
+    @pyqtProperty(bool, notify = globalContainerChanged)
+    def hasVariantBuildplates(self) -> bool:
+        if self._global_container_stack:
+            return Util.parseBool(self._global_container_stack.getMetaDataEntry("has_variant_buildplates", False))
+        return False
+
+    ##  The selected buildplate is compatible if it is compatible with all the materials in all the extruders
+    @pyqtProperty(bool, notify = activeMaterialChanged)
+    def variantBuildplateCompatible(self) -> bool:
+        if not self._global_container_stack:
+            return True
+
+        buildplate_compatible = True  # It is compatible by default
+        extruder_stacks = self._global_container_stack.extruders.values()
+        for stack in extruder_stacks:
+            material_container = stack.material
+            if material_container == self._empty_material_container:
+                continue
+            if material_container.getMetaDataEntry("buildplate_compatible"):
+                buildplate_compatible = buildplate_compatible and material_container.getMetaDataEntry("buildplate_compatible")[self.activeVariantBuildplateName]
+
+        return buildplate_compatible
+
+    ##  The selected buildplate is usable if it is usable for all materials OR it is compatible for one but not compatible
+    #   for the other material but the buildplate is still usable
+    @pyqtProperty(bool, notify = activeMaterialChanged)
+    def variantBuildplateUsable(self) -> bool:
+        if not self._global_container_stack:
+            return True
+
+        # Here the next formula is being calculated:
+        # result = (not (material_left_compatible and material_right_compatible)) and
+        #           (material_left_compatible or material_left_usable) and
+        #           (material_right_compatible or material_right_usable)
+        result = not self.variantBuildplateCompatible
+        extruder_stacks = self._global_container_stack.extruders.values()
+        for stack in extruder_stacks:
+            material_container = stack.material
+            if material_container == self._empty_material_container:
+                continue
+            buildplate_compatible = material_container.getMetaDataEntry("buildplate_compatible")[self.activeVariantBuildplateName] if material_container.getMetaDataEntry("buildplate_compatible") else True
+            buildplate_usable = material_container.getMetaDataEntry("buildplate_recommended")[self.activeVariantBuildplateName] if material_container.getMetaDataEntry("buildplate_recommended") else True
+
+            result = result and (buildplate_compatible or buildplate_usable)
+
+        return result
+
     ##  Property to indicate if a machine has "specialized" material profiles.
     #   Some machines have their own material profiles that "override" the default catch all profiles.
     @pyqtProperty(bool, notify = globalContainerChanged)

cura/Settings/ProfilesModel.py

@@ -36,6 +36,8 @@ class ProfilesModel(InstanceContainersModel):
         Application.getInstance().getMachineManager().activeStackChanged.connect(self._update)
         Application.getInstance().getMachineManager().activeMaterialChanged.connect(self._update)
 
+        self._empty_quality = ContainerRegistry.getInstance().findContainers(id = "empty_quality")[0]
+
     # Factory function, used by QML
     @staticmethod
     def createProfilesModel(engine, js_engine):
@@ -85,11 +87,8 @@ class ProfilesModel(InstanceContainersModel):
             if quality.getMetaDataEntry("quality_type") not in quality_type_set:
                 result.append(quality)
 
-        # if still profiles are found, add a single empty_quality ("Not supported") instance to the drop down list
-        if len(result) == 0:
-            # If not qualities are found we dynamically create a not supported container for this machine + material combination
-            not_supported_container = ContainerRegistry.getInstance().findContainers(id = "empty_quality")[0]
-            result.append(not_supported_container)
+        if len(result) > 1 and self._empty_quality in result:
+            result.remove(self._empty_quality)
 
         return {item.getId(): item for item in result}, {} #Only return true profiles for now, no metadata. The quality manager is not able to get only metadata yet.
 
@@ -114,7 +113,6 @@ class ProfilesModel(InstanceContainersModel):
         # active machine and material, and later yield the right ones.
         tmp_all_quality_items = OrderedDict()
         for item in super()._recomputeItems():
-
             profiles = container_registry.findContainersMetadata(id = item["id"])
             if not profiles or "quality_type" not in profiles[0]:
                 quality_type = ""

cura/Settings/QualityAndUserProfilesModel.py

@@ -1,17 +1,21 @@
 # Copyright (c) 2016 Ultimaker B.V.
 # Cura is released under the terms of the LGPLv3 or higher.
 from UM.Application import Application
+from UM.Settings.ContainerRegistry import ContainerRegistry
 
 from cura.QualityManager import QualityManager
 from cura.Settings.ProfilesModel import ProfilesModel
 from cura.Settings.ExtruderManager import ExtruderManager
 
+
 ##  QML Model for listing the current list of valid quality and quality changes profiles.
 #
 class QualityAndUserProfilesModel(ProfilesModel):
     def __init__(self, parent = None):
         super().__init__(parent)
 
+        self._empty_quality = ContainerRegistry.getInstance().findInstanceContainers(id = "empty_quality")[0]
+
     ##  Fetch the list of containers to display.
     #
     #   See UM.Settings.Models.InstanceContainersModel._fetchInstanceContainers().
@@ -35,6 +39,8 @@ class QualityAndUserProfilesModel(ProfilesModel):
 
         # Filter the quality_change by the list of available quality_types
         quality_type_set = set([x.getMetaDataEntry("quality_type") for x in quality_list])
+        # Also show custom profiles based on "Not Supported" quality profile
+        quality_type_set.add(self._empty_quality.getMetaDataEntry("quality_type"))
         filtered_quality_changes = {qc.getId(): qc for qc in quality_changes_list if
                                     qc.getMetaDataEntry("quality_type") in quality_type_set and
                                     qc.getMetaDataEntry("extruder") is not None and
@@ -42,5 +48,7 @@ class QualityAndUserProfilesModel(ProfilesModel):
                                      qc.getMetaDataEntry("extruder") == active_extruder.definition.getId())}
 
         result = filtered_quality_changes
-        result.update({q.getId():q for q in quality_list})
+        for q in quality_list:
+            if q.getId() != "empty_quality":
+                result[q.getId()] = q
         return result, {} #Only return true profiles for now, no metadata. The quality manager is not able to get only metadata yet.

cura/Settings/QualitySettingsModel.py

@@ -1,8 +1,6 @@
 # Copyright (c) 2017 Ultimaker B.V.
 # Cura is released under the terms of the LGPLv3 or higher.
 
-import collections
-
 from PyQt5.QtCore import pyqtProperty, pyqtSignal, Qt
 
 from UM.Logger import Logger
@@ -42,6 +40,8 @@ class QualitySettingsModel(UM.Qt.ListModel.ListModel):
         self.addRoleName(self.UserValueRole, "user_value")
         self.addRoleName(self.CategoryRole, "category")
 
+        self._empty_quality = self._container_registry.findInstanceContainers(id = "empty_quality")[0]
+
     def setExtruderId(self, extruder_id):
         if extruder_id != self._extruder_id:
             self._extruder_id = extruder_id
@@ -107,6 +107,9 @@ class QualitySettingsModel(UM.Qt.ListModel.ListModel):
         else:
             quality_changes_container = containers[0]
 
+            if quality_changes_container.getMetaDataEntry("quality_type") == self._empty_quality.getMetaDataEntry("quality_type"):
+                quality_container = self._empty_quality
+            else:
                 criteria = {
                     "type": "quality",
                     "quality_type": quality_changes_container.getMetaDataEntry("quality_type"),
@@ -117,9 +120,14 @@ class QualitySettingsModel(UM.Qt.ListModel.ListModel):
                 if not quality_container:
                     Logger.log("w", "Could not find a quality container matching quality changes %s", quality_changes_container.getId())
                     return
+
                 quality_container = quality_container[0]
 
         quality_type = quality_container.getMetaDataEntry("quality_type")
+
+        if quality_type == "not_supported":
+            containers = []
+        else:
             definition_id = Application.getInstance().getMachineManager().getQualityDefinitionId(quality_container.getDefinition())
             definition = quality_container.getDefinition()
 
@@ -163,6 +171,9 @@ class QualitySettingsModel(UM.Qt.ListModel.ListModel):
                 return
 
         if quality_changes_container:
+            if quality_type == "not_supported":
+                criteria = {"type": "quality_changes", "quality_type": quality_type, "name": quality_changes_container.getName()}
+            else:
                 criteria = {"type": "quality_changes", "quality_type": quality_type, "definition": definition_id, "name": quality_changes_container.getName()}
                 if self._extruder_definition_id != "":
                     extruder_definitions = self._container_registry.findDefinitionContainers(id = self._extruder_definition_id)
@@ -177,7 +188,6 @@ class QualitySettingsModel(UM.Qt.ListModel.ListModel):
                 containers.extend(changes)
 
         global_container_stack = Application.getInstance().getGlobalContainerStack()
-        is_multi_extrusion = global_container_stack.getProperty("machine_extruder_count", "value") > 1
 
         current_category = ""
         for definition in definition_container.findDefinitions():
@@ -213,7 +223,6 @@ class QualitySettingsModel(UM.Qt.ListModel.ListModel):
             if profile_value is None and user_value is None:
                 continue
 
-            if is_multi_extrusion:
             settable_per_extruder = global_container_stack.getProperty(definition.key, "settable_per_extruder")
             # If a setting is not settable per extruder (global) and we're looking at an extruder tab, don't show this value.
             if self._extruder_id != "" and not settable_per_extruder:

cura/Settings/UserProfilesModel.py

@@ -2,6 +2,8 @@
 # Cura is released under the terms of the LGPLv3 or higher.
 
 from UM.Application import Application
+from UM.Settings.ContainerRegistry import ContainerRegistry
+
 from cura.QualityManager import QualityManager
 from cura.Settings.ProfilesModel import ProfilesModel
 from cura.Settings.ExtruderManager import ExtruderManager
@@ -22,6 +24,8 @@ class UserProfilesModel(ProfilesModel):
         for material in self.__current_materials:
             material.metaDataChanged.connect(self._onContainerChanged)
 
+        self._empty_quality = ContainerRegistry.getInstance().findContainers(id = "empty_quality")[0]
+
     ##  Fetch the list of containers to display.
     #
     #   See UM.Settings.Models.InstanceContainersModel._fetchInstanceContainers().
@@ -45,6 +49,7 @@ class UserProfilesModel(ProfilesModel):
 
         # Filter the quality_change by the list of available quality_types
         quality_type_set = set([x.getMetaDataEntry("quality_type") for x in quality_list])
+        quality_type_set.add(self._empty_quality.getMetaDataEntry("quality_type"))
 
         filtered_quality_changes = {qc.getId():qc for qc in quality_changes_list if
                                     qc.getMetaDataEntry("quality_type") in quality_type_set and

plugins/3MFReader/ThreeMFReader.py

@@ -81,8 +81,10 @@ class ThreeMFReader(MeshReader):
         self._object_count += 1
         node_name = "Object %s" % self._object_count
 
+        active_build_plate = Application.getInstance().getBuildPlateModel().activeBuildPlate
+
         um_node = CuraSceneNode()
-        um_node.addDecorator(BuildPlateDecorator(0))
+        um_node.addDecorator(BuildPlateDecorator(active_build_plate))
         um_node.setName(node_name)
         transformation = self._createMatrixFromTransformationString(savitar_node.getTransformation())
         um_node.setTransformation(transformation)

plugins/3MFReader/ThreeMFWorkspaceReader.py

@@ -168,11 +168,9 @@ class ThreeMFWorkspaceReader(WorkspaceReader):
                 Logger.log("w", "Unknown definition container type %s for %s",
                            definition_container_type, each_definition_container_file)
             Job.yieldThread()
-        # sanity check
+
         if machine_definition_container_count != 1:
-            msg = "Expecting one machine definition container but got %s" % machine_definition_container_count
-            Logger.log("e", msg)
-            raise RuntimeError(msg)
+            return WorkspaceReader.PreReadResult.failed #Not a workspace file but ordinary 3MF.
 
         material_labels = []
         material_conflict = False
@@ -271,7 +269,6 @@ class ThreeMFWorkspaceReader(WorkspaceReader):
         # if the global stack is found, we check if there are conflicts in the extruder stacks
         if containers_found_dict["machine"] and not machine_conflict:
             for extruder_stack_file in extruder_stack_files:
-                container_id = self._stripFileToId(extruder_stack_file)
                 serialized = archive.open(extruder_stack_file).read().decode("utf-8")
                 parser = configparser.ConfigParser()
                 parser.read_string(serialized)
@@ -303,7 +300,6 @@ class ThreeMFWorkspaceReader(WorkspaceReader):
                         break
 
         num_visible_settings = 0
-        has_visible_settings_string = False
         try:
             temp_preferences = Preferences()
             serialized = archive.open("Cura/preferences.cfg").read().decode("utf-8")
@@ -609,7 +605,7 @@ class ThreeMFWorkspaceReader(WorkspaceReader):
 
                         instance_container.setName(self._container_registry.uniqueName(instance_container.getName()))
                         new_changes_container_id = self.getNewId(instance_container.getId())
-                        instance_container._id = new_changes_container_id
+                        instance_container.setMetaDataEntry("id", new_changes_container_id)
 
                         # TODO: we don't know the following is correct or not, need to verify
                         #       AND REFACTOR!!!

plugins/3MFWriter/ThreeMFWriter.py

@@ -6,8 +6,9 @@ from UM.Math.Vector import Vector
 from UM.Logger import Logger
 from UM.Math.Matrix import Matrix
 from UM.Application import Application
-import UM.Scene.SceneNode
-from cura.Scene.CuraSceneNode import CuraSceneNode
+from UM.Scene.SceneNode import SceneNode
+
+from cura.CuraApplication import CuraApplication
 
 import Savitar
 
@@ -62,11 +63,15 @@ class ThreeMFWriter(MeshWriter):
         self._store_archive = store_archive
 
     ##  Convenience function that converts an Uranium SceneNode object to a SavitarSceneNode
-    #   \returns Uranium Scenen node.
+    #   \returns Uranium Scene node.
     def _convertUMNodeToSavitarNode(self, um_node, transformation = Matrix()):
-        if type(um_node) not in [UM.Scene.SceneNode.SceneNode, CuraSceneNode]:
+        if not isinstance(um_node, SceneNode):
             return None
 
+        active_build_plate_nr = CuraApplication.getInstance().getBuildPlateModel().activeBuildPlate
+        if um_node.callDecoration("getBuildPlateNumber") != active_build_plate_nr:
+            return
+
         savitar_node = Savitar.SceneNode()
 
         node_matrix = um_node.getLocalTransformation()
@@ -97,6 +102,9 @@ class ThreeMFWriter(MeshWriter):
                 savitar_node.setSetting(key, str(stack.getProperty(key, "value")))
 
         for child_node in um_node.getChildren():
+            # only save the nodes on the active build plate
+            if child_node.callDecoration("getBuildPlateNumber") != active_build_plate_nr:
+                continue
             savitar_child_node = self._convertUMNodeToSavitarNode(child_node)
             if savitar_child_node is not None:
                 savitar_node.addChild(savitar_child_node)

plugins/CuraEngineBackend/CuraEngineBackend.py

@@ -88,7 +88,7 @@ class CuraEngineBackend(QObject, Backend):
         #
         self._global_container_stack = None
         Application.getInstance().globalContainerStackChanged.connect(self._onGlobalStackChanged)
-        Application.getInstance().getExtruderManager().activeExtruderChanged.connect(self._onGlobalStackChanged)
+        Application.getInstance().getExtruderManager().extrudersAdded.connect(self._onGlobalStackChanged)
         self._onGlobalStackChanged()
 
         Application.getInstance().stacksValidationFinished.connect(self._onStackErrorCheckFinished)
@@ -423,7 +423,7 @@ class CuraEngineBackend(QObject, Backend):
     #
     #   \param source The scene node that was changed.
     def _onSceneChanged(self, source):
-        if not issubclass(type(source), SceneNode):
+        if not isinstance(source, SceneNode):
             return
 
         build_plate_changed = set()
@@ -722,7 +722,7 @@ class CuraEngineBackend(QObject, Backend):
         if self._global_container_stack:
             self._global_container_stack.propertyChanged.disconnect(self._onSettingChanged)
             self._global_container_stack.containersChanged.disconnect(self._onChanged)
-            extruders = list(ExtruderManager.getInstance().getMachineExtruders(self._global_container_stack.getId()))
+            extruders = list(self._global_container_stack.extruders.values())
 
             for extruder in extruders:
                 extruder.propertyChanged.disconnect(self._onSettingChanged)
@@ -733,7 +733,7 @@ class CuraEngineBackend(QObject, Backend):
         if self._global_container_stack:
             self._global_container_stack.propertyChanged.connect(self._onSettingChanged)  # Note: Only starts slicing when the value changed.
             self._global_container_stack.containersChanged.connect(self._onChanged)
-            extruders = list(ExtruderManager.getInstance().getMachineExtruders(self._global_container_stack.getId()))
+            extruders = list(self._global_container_stack.extruders.values())
             for extruder in extruders:
                 extruder.propertyChanged.connect(self._onSettingChanged)
                 extruder.containersChanged.connect(self._onChanged)

plugins/CuraEngineBackend/StartSliceJob.py

@@ -122,6 +122,12 @@ class StartSliceJob(Job):
             self.setResult(StartJobResult.BuildPlateError)
             return
 
+        # Don't slice if the buildplate or the nozzle type is incompatible with the materials
+        if not Application.getInstance().getMachineManager().variantBuildplateCompatible and \
+                not Application.getInstance().getMachineManager().variantBuildplateUsable:
+            self.setResult(StartJobResult.MaterialIncompatible)
+            return
+
         for extruder_stack in ExtruderManager.getInstance().getMachineExtruders(stack.getId()):
             material = extruder_stack.findContainer({"type": "material"})
             if material:

plugins/MachineSettingsAction/MachineSettingsAction.py

@@ -225,7 +225,10 @@ class MachineSettingsAction(MachineAction):
         material_approximate_diameter = str(round(material_diameter))
         machine_diameter = extruder_stack.definitionChanges.getProperty("material_diameter", "value")
         if not machine_diameter:
+            if extruder_stack.definition.hasProperty("material_diameter", "value"):
                 machine_diameter = extruder_stack.definition.getProperty("material_diameter", "value")
+            else:
+                machine_diameter = self._global_container_stack.definition.getProperty("material_diameter", "value")
         machine_approximate_diameter = str(round(machine_diameter))
 
         if material_approximate_diameter != machine_approximate_diameter:

plugins/PostProcessingPlugin/PostProcessingPlugin.py

@@ -54,7 +54,11 @@ class PostProcessingPlugin(QObject, Extension):
     ##  Execute all post-processing scripts on the gcode.
     def execute(self, output_device):
         scene = Application.getInstance().getController().getScene()
+        gcode_dict = None
+
+        if hasattr(scene, "gcode_dict"):
             gcode_dict = getattr(scene, "gcode_dict")
+
         if not gcode_dict:
             return
 

plugins/SimulationView/SimulationPass.py

@@ -106,7 +106,7 @@ class SimulationPass(RenderPass):
                 nozzle_node = node
                 nozzle_node.setVisible(False)
 
-            elif issubclass(type(node), SceneNode) and (node.getMeshData() or node.callDecoration("isBlockSlicing")) and node.isVisible():
+            elif isinstance(node, SceneNode) and (node.getMeshData() or node.callDecoration("isBlockSlicing")) and node.isVisible():
                 layer_data = node.callDecoration("getLayerData")
                 if not layer_data:
                     continue

plugins/SimulationView/SimulationView.py

@@ -1,4 +1,4 @@
-# Copyright (c) 2017 Ultimaker B.V.
+# Copyright (c) 2018 Ultimaker B.V.
 # Cura is released under the terms of the LGPLv3 or higher.
 
 import sys
@@ -344,7 +344,12 @@ class SimulationView(View):
                     self._max_feedrate = max(float(p.lineFeedrates.max()), self._max_feedrate)
                     self._min_feedrate = min(float(p.lineFeedrates.min()), self._min_feedrate)
                     self._max_thickness = max(float(p.lineThicknesses.max()), self._max_thickness)
-                    self._min_thickness = min(float(p.lineThicknesses.min()), self._min_thickness)
+                    try:
+                        self._min_thickness = min(float(p.lineThicknesses[numpy.nonzero(p.lineThicknesses)].min()), self._min_thickness)
+                    except:
+                        # Sometimes, when importing a GCode the line thicknesses are zero and so the minimum (avoiding
+                        # the zero) can't be calculated
+                        Logger.log("i", "Min thickness can't be calculated because all the values are zero")
                 if max_layer_number < layer_id:
                     max_layer_number = layer_id
                 if min_layer_number > layer_id:

plugins/SimulationView/SimulationViewProxy.py

@@ -1,4 +1,4 @@
-# Copyright (c) 2017 Ultimaker B.V.
+# Copyright (c) 2018 Ultimaker B.V.
 # Cura is released under the terms of the LGPLv3 or higher.
 
 from PyQt5.QtCore import QObject, pyqtSignal, pyqtProperty
@@ -117,7 +117,7 @@ class SimulationViewProxy(QObject):
     def setSimulationViewType(self, layer_view_type):
         active_view = self._controller.getActiveView()
         if isinstance(active_view, SimulationView.SimulationView.SimulationView):
-            active_view.setSimulationViewisinstance(layer_view_type)
+            active_view.setSimulationViewType(layer_view_type)
 
     @pyqtSlot(result=int)
     def getSimulationViewType(self):

plugins/SimulationView/__init__.py

@@ -1,4 +1,4 @@
-# Copyright (c) 2017 Ultimaker B.V.
+# Copyright (c) 2018 Ultimaker B.V.
 # Cura is released under the terms of the LGPLv3 or higher.
 
 from PyQt5.QtQml import qmlRegisterSingletonType
@@ -18,7 +18,7 @@ def getMetaData():
     }
 
 def createSimulationViewProxy(engine, script_engine):
-    return SimulationViewProxy.SimulatorViewProxy()
+    return SimulationViewProxy.SimulationViewProxy()
 
 def register(app):
     simulation_view = SimulationView.SimulationView()

plugins/UM3NetworkPrinting/ClusterMonitorItem.qml

@@ -52,13 +52,19 @@ Component
             {
                 id: addRemovePrintersLabel
                 anchors.right: parent.right
-                text: "Add / remove printers"
+                text: catalog.i18nc("@label link to connect manager", "Add/Remove printers")
+                font: UM.Theme.getFont("default")
+                color: UM.Theme.getColor("text")
+                linkColor: UM.Theme.getColor("text_link")
             }
 
             MouseArea
             {
                 anchors.fill: addRemovePrintersLabel
+                hoverEnabled: true
                 onClicked: Cura.MachineManager.printerOutputDevices[0].openPrinterControlPanel()
+                onEntered: addRemovePrintersLabel.font.underline = true
+                onExited: addRemovePrintersLabel.font.underline = false
             }
         }
 

plugins/UM3NetworkPrinting/ClusterUM3OutputDevice.py

@@ -69,6 +69,8 @@ class ClusterUM3OutputDevice(NetworkedPrinterOutputDevice):
         self.setShortDescription(i18n_catalog.i18nc("@action:button Preceded by 'Ready to'.", "Print over network"))
         self.setDescription(i18n_catalog.i18nc("@properties:tooltip", "Print over network"))
 
+        self.setConnectionText(i18n_catalog.i18nc("@info:status", "Connected over the network"))
+
         self._printer_uuid_to_unique_name_mapping = {}
 
         self._finished_jobs = []
@@ -76,20 +78,26 @@ class ClusterUM3OutputDevice(NetworkedPrinterOutputDevice):
         self._cluster_size = int(properties.get(b"cluster_size", 0))
 
     def requestWrite(self, nodes, file_name=None, filter_by_machine=False, file_handler=None, **kwargs):
-        # Notify the UI that a switch to the print monitor should happen
-        Application.getInstance().getController().setActiveStage("MonitorStage")
         self.writeStarted.emit(self)
 
-        self._gcode = getattr(Application.getInstance().getController().getScene(), "gcode_list", [])
-        if not self._gcode:
+        gcode_dict = getattr(Application.getInstance().getController().getScene(), "gcode_dict", [])
+        active_build_plate_id = Application.getInstance().getBuildPlateModel().activeBuildPlate
+        gcode_list = gcode_dict[active_build_plate_id]
+
+        if not gcode_list:
             # Unable to find g-code. Nothing to send
             return
 
+        self._gcode = gcode_list
+
         if len(self._printers) > 1:
             self._spawnPrinterSelectionDialog()
         else:
             self.sendPrintJob()
 
+        # Notify the UI that a switch to the print monitor should happen
+        Application.getInstance().getController().setActiveStage("MonitorStage")
+
     def _spawnPrinterSelectionDialog(self):
         if self._printer_selection_dialog is None:
             path = os.path.join(os.path.dirname(os.path.abspath(__file__)), "PrintWindow.qml")
@@ -240,7 +248,10 @@ class ClusterUM3OutputDevice(NetworkedPrinterOutputDevice):
 
         newly_finished_jobs = [job for job in finished_jobs if job not in self._finished_jobs and job.owner == username]
         for job in newly_finished_jobs:
+            if job.assignedPrinter:
                 job_completed_text = i18n_catalog.i18nc("@info:status", "Printer '{printer_name}' has finished printing '{job_name}'.".format(printer_name=job.assignedPrinter.name, job_name = job.name))
+            else:
+                job_completed_text =  i18n_catalog.i18nc("@info:status", "The print job '{job_name}' was finished.".format(job_name = job.name))
             job_completed_message = Message(text=job_completed_text, title = i18n_catalog.i18nc("@info:status", "Print finished"))
             job_completed_message.show()
 

plugins/UM3NetworkPrinting/LegacyUM3OutputDevice.py

@@ -78,10 +78,16 @@ class LegacyUM3OutputDevice(NetworkedPrinterOutputDevice):
 
     def _onAuthenticationStateChanged(self):
         # We only accept commands if we are authenticated.
+        self._setAcceptsCommands(self._authentication_state == AuthState.Authenticated)
+
         if self._authentication_state == AuthState.Authenticated:
-            self._setAcceptsCommands(True)
-        else:
-            self._setAcceptsCommands(False)
+            self.setConnectionText(i18n_catalog.i18nc("@info:status", "Connected over the network."))
+        elif self._authentication_state == AuthState.AuthenticationRequested:
+            self.setConnectionText(i18n_catalog.i18nc("@info:status",
+                                                      "Connected over the network. Please approve the access request on the printer."))
+        elif self._authentication_state == AuthState.AuthenticationDenied:
+            self.setConnectionText(i18n_catalog.i18nc("@info:status", "Connected over the network. No access to control the printer."))
+
 
     def _setupMessages(self):
         self._authentication_requested_message = Message(i18n_catalog.i18nc("@info:status",
@@ -175,15 +181,18 @@ class LegacyUM3OutputDevice(NetworkedPrinterOutputDevice):
             # Not authenticated, so unable to send job.
             return
 
-        # Notify the UI that a switch to the print monitor should happen
-        Application.getInstance().getController().setActiveStage("MonitorStage")
         self.writeStarted.emit(self)
 
-        self._gcode = getattr(Application.getInstance().getController().getScene(), "gcode_list", [])
-        if not self._gcode:
+        gcode_dict = getattr(Application.getInstance().getController().getScene(), "gcode_dict", [])
+        active_build_plate_id = Application.getInstance().getBuildPlateModel().activeBuildPlate
+        gcode_list = gcode_dict[active_build_plate_id]
+
+        if not gcode_list:
             # Unable to find g-code. Nothing to send
             return
 
+        self._gcode = gcode_list
+
         errors = self._checkForErrors()
         if errors:
             text = i18n_catalog.i18nc("@label", "Unable to start a new print job.")
@@ -229,6 +238,9 @@ class LegacyUM3OutputDevice(NetworkedPrinterOutputDevice):
         # No warnings or errors, so we're good to go.
         self._startPrint()
 
+        # Notify the UI that a switch to the print monitor should happen
+        Application.getInstance().getController().setActiveStage("MonitorStage")
+
     def _startPrint(self):
         Logger.log("i", "Sending print job to printer.")
         if self._sending_gcode:

plugins/UM3NetworkPrinting/PrintWindow.qml

@@ -31,6 +31,7 @@ UM.Dialog
 
     property var printersModel:  ListModel{}
     function resetPrintersModel() {
+        printersModel.clear()
         printersModel.append({ name: "Automatic", key: ""})
 
         for (var index in OutputDevice.printers)

plugins/UM3NetworkPrinting/UM3InfoComponents.qml

@@ -115,24 +115,8 @@ Item
         {
             tooltip: catalog.i18nc("@info:tooltip", "Load the configuration of the printer into Cura")
             text: catalog.i18nc("@action:button", "Activate Configuration")
-            visible: printerConnected && !isClusterPrinter()
+            visible: false // printerConnected && !isClusterPrinter()
             onClicked: manager.loadConfigurationFromPrinter()
-
-            function isClusterPrinter() {
-                return false
-                //TODO: Hardcoded this for the moment now. These info components might also need to move.
-                /*if(Cura.MachineManager.printerOutputDevices.length == 0)
-                {
-                    return false;
-                }
-                var clusterSize = Cura.MachineManager.printerOutputDevices[0].clusterSize;
-                // This is not a cluster printer or the cluster it is just one printer
-                if(clusterSize == undefined || clusterSize == 1)
-                {
-                    return false;
-                }
-                return true;*/
-            }
         }
     }
 

plugins/USBPrinting/USBPrinterOutputDevice.py

@@ -80,6 +80,8 @@ class USBPrinterOutputDevice(PrinterOutputDevice):
         self._firmware_progress = 0
         self._firmware_update_state = FirmwareUpdateState.idle
 
+        self.setConnectionText(catalog.i18nc("@info:status", "Connected via USB"))
+
         # Queue for commands that need to be send. Used when command is sent when a print is active.
         self._command_queue = Queue()
 

plugins/XmlMaterialProfile/XmlMaterialProfile.py

@@ -576,6 +576,42 @@ class XmlMaterialProfile(InstanceContainer):
                         if is_new_material:
                             containers_to_add.append(new_material)
 
+                    # Find the buildplates compatibility
+                    buildplates = machine.iterfind("./um:buildplate", self.__namespaces)
+                    buildplate_map = {}
+                    buildplate_map["buildplate_compatible"] = {}
+                    buildplate_map["buildplate_recommended"] = {}
+                    for buildplate in buildplates:
+                        buildplate_id = buildplate.get("id")
+                        if buildplate_id is None:
+                            continue
+
+                        variant_containers = ContainerRegistry.getInstance().findInstanceContainersMetadata(
+                            id = buildplate_id)
+                        if not variant_containers:
+                            # It is not really properly defined what "ID" is so also search for variants by name.
+                            variant_containers = ContainerRegistry.getInstance().findInstanceContainersMetadata(
+                                definition = machine_id, name = buildplate_id)
+
+                        if not variant_containers:
+                            continue
+
+                        buildplate_compatibility = machine_compatibility
+                        buildplate_recommended = machine_compatibility
+                        settings = buildplate.iterfind("./um:setting", self.__namespaces)
+                        for entry in settings:
+                            key = entry.get("key")
+                            if key in self.__unmapped_settings:
+                                if key == "hardware compatible":
+                                    buildplate_compatibility = self._parseCompatibleValue(entry.text)
+                                elif key == "hardware recommended":
+                                    buildplate_recommended = self._parseCompatibleValue(entry.text)
+                            else:
+                                Logger.log("d", "Unsupported material setting %s", key)
+
+                        buildplate_map["buildplate_compatible"][buildplate_id] = buildplate_compatibility
+                        buildplate_map["buildplate_recommended"][buildplate_id] = buildplate_recommended
+
                     hotends = machine.iterfind("./um:hotend", self.__namespaces)
                     for hotend in hotends:
                         hotend_id = hotend.get("id")
@@ -605,8 +641,7 @@ class XmlMaterialProfile(InstanceContainer):
 
                         new_hotend_id = self.getId() + "_" + machine_id + "_" + hotend_id.replace(" ", "_")
 
-                        # Same as machine compatibility, keep the derived material containers consistent with the parent
-                        # material
+                        # Same as machine compatibility, keep the derived material containers consistent with the parent material
                         if ContainerRegistry.getInstance().isLoaded(new_hotend_id):
                             new_hotend_material = ContainerRegistry.getInstance().findContainers(id = new_hotend_id)[0]
                             is_new_material = False
@@ -623,6 +658,9 @@ class XmlMaterialProfile(InstanceContainer):
                         new_hotend_material.getMetaData()["compatible"] = hotend_compatibility
                         new_hotend_material.getMetaData()["machine_manufacturer"] = machine_manufacturer
                         new_hotend_material.getMetaData()["definition"] = machine_id
+                        if buildplate_map["buildplate_compatible"]:
+                            new_hotend_material.getMetaData()["buildplate_compatible"] = buildplate_map["buildplate_compatible"]
+                            new_hotend_material.getMetaData()["buildplate_recommended"] = buildplate_map["buildplate_recommended"]
 
                         cached_hotend_setting_properties = cached_machine_setting_properties.copy()
                         cached_hotend_setting_properties.update(hotend_setting_values)
@@ -763,6 +801,34 @@ class XmlMaterialProfile(InstanceContainer):
                         if len(found_materials) == 0: #This is a new material.
                             result_metadata.append(new_material_metadata)
 
+                    buildplates = machine.iterfind("./um:buildplate", cls.__namespaces)
+                    buildplate_map = {}
+                    buildplate_map["buildplate_compatible"] = {}
+                    buildplate_map["buildplate_recommended"] = {}
+                    for buildplate in buildplates:
+                        buildplate_id = buildplate.get("id")
+                        if buildplate_id is None:
+                            continue
+
+                        variant_containers = ContainerRegistry.getInstance().findInstanceContainersMetadata(id = buildplate_id)
+                        if not variant_containers:
+                            # It is not really properly defined what "ID" is so also search for variants by name.
+                            variant_containers = ContainerRegistry.getInstance().findInstanceContainersMetadata(definition = machine_id, name = buildplate_id)
+
+                        if not variant_containers:
+                            continue
+
+                        settings = buildplate.iterfind("./um:setting", cls.__namespaces)
+                        for entry in settings:
+                            key = entry.get("key")
+                            if key == "hardware compatible":
+                                buildplate_compatibility = cls._parseCompatibleValue(entry.text)
+                            elif key == "hardware recommended":
+                                buildplate_recommended = cls._parseCompatibleValue(entry.text)
+
+                        buildplate_map["buildplate_compatible"][buildplate_id] = buildplate_map["buildplate_compatible"]
+                        buildplate_map["buildplate_recommended"][buildplate_id] = buildplate_map["buildplate_recommended"]
+
                     for hotend in machine.iterfind("./um:hotend", cls.__namespaces):
                         hotend_id = hotend.get("id")
                         if hotend_id is None:
@@ -781,8 +847,7 @@ class XmlMaterialProfile(InstanceContainer):
 
                         new_hotend_id = container_id + "_" + machine_id + "_" + hotend_id.replace(" ", "_")
 
-                        # Same as machine compatibility, keep the derived material containers consistent with the parent
-                        # material
+                        # Same as machine compatibility, keep the derived material containers consistent with the parent material
                         found_materials = ContainerRegistry.getInstance().findInstanceContainersMetadata(id = new_hotend_id)
                         if found_materials:
                             new_hotend_material_metadata = found_materials[0]
@@ -799,6 +864,9 @@ class XmlMaterialProfile(InstanceContainer):
                         new_hotend_material_metadata["machine_manufacturer"] = machine_manufacturer
                         new_hotend_material_metadata["id"] = new_hotend_id
                         new_hotend_material_metadata["definition"] = machine_id
+                        if buildplate_map["buildplate_compatible"]:
+                            new_hotend_material_metadata["buildplate_compatible"] = buildplate_map["buildplate_compatible"]
+                            new_hotend_material_metadata["buildplate_recommended"] = buildplate_map["buildplate_recommended"]
 
                         if len(found_materials) == 0:
                             result_metadata.append(new_hotend_material_metadata)
@@ -874,7 +942,7 @@ class XmlMaterialProfile(InstanceContainer):
     # Map XML file setting names to internal names
     __material_settings_setting_map = {
         "print temperature": "default_material_print_temperature",
-        "heated bed temperature": "material_bed_temperature",
+        "heated bed temperature": "default_material_bed_temperature",
         "standby temperature": "material_standby_temperature",
         "processing temperature graph": "material_flow_temp_graph",
         "print cooling": "cool_fan_speed",
@@ -884,7 +952,8 @@ class XmlMaterialProfile(InstanceContainer):
         "surface energy": "material_surface_energy"
     }
     __unmapped_settings = [
-        "hardware compatible"
+        "hardware compatible",
+        "hardware recommended"
     ]
     __material_properties_setting_map = {
         "diameter": "material_diameter"

resources/definitions/3dator.def.json

@@ -47,9 +47,9 @@
             "default_value": 30
         },
         "machine_start_gcode": {
-            "default_value": ";Sliced at: {day} {date} {time}\nM104 S{material_print_temperature} ;set temperatures\nM140 S{material_bed_temperature}\nM109 S{material_print_temperature} ;wait for temperatures\nM190 S{material_bed_temperature}\nG21  ;metric values\nG90  ;absolute positioning\nM82  ;set extruder to absolute mode\nM107  ;start with the fan off\nG28 Z0  ;move Z to min endstops\nG28 X0 Y0  ;move X/Y to min endstops\nG29  ;Auto Level\nG1 Z0.6 F{travel_speed} ;move the Nozzle near the Bed\nG92 E0\nG1 Y0  ;zero the extruded length\nG1 X10 E30 F500  ;printing a Line from right to left\nG92 E0  ;zero the extruded length again\nG1 Z2\nG1 F{travel_speed}\nM117 Printing...;Put printing message on LCD screen\nM150 R255 U255 B255 P4 ;Change LED Color to white"      },
+            "default_value": ";Sliced at: {day} {date} {time}\nM104 S{material_print_temperature} ;set temperatures\nM140 S{material_bed_temperature}\nM109 S{material_print_temperature} ;wait for temperatures\nM190 S{material_bed_temperature}\nG21  ;metric values\nG90  ;absolute positioning\nM82  ;set extruder to absolute mode\nM107  ;start with the fan off\nG28 Z0  ;move Z to min endstops\nG28 X0 Y0  ;move X/Y to min endstops\nG29  ;Auto Level\nG1 Z0.6 F{speed_travel} ;move the Nozzle near the Bed\nG92 E0\nG1 Y0  ;zero the extruded length\nG1 X10 E30 F500  ;printing a Line from right to left\nG92 E0  ;zero the extruded length again\nG1 Z2\nG1 F{speed_travel}\nM117 Printing...;Put printing message on LCD screen\nM150 R255 U255 B255 P4 ;Change LED Color to white"      },
         "machine_end_gcode": {
-            "default_value": "M104 S0                     ;extruder heater off\nM140 S0                     ;heated bed heater off (if you have it)\nG91                                    ;relative positioning\nG1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more\nG28                          ;move X/Y to min endstops, so the head is out of the way\nM84                         ;steppers off\nG90                         ;absolute positioning"
+            "default_value": "M104 S0                     ;extruder heater off\nM140 S0                     ;heated bed heater off (if you have it)\nG91                                    ;relative positioning\nG1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F{speed_travel} ;move Z up a bit and retract filament even more\nG28                          ;move X/Y to min endstops, so the head is out of the way\nM84                         ;steppers off\nG90                         ;absolute positioning"
         }
     }
 }

resources/definitions/alya3dp.def.json

@@ -40,10 +40,10 @@
             "default_value": "RepRap"
         },
         "machine_start_gcode": {
-            "default_value": ";Sliced at: {day} {date} {time}\n;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}\n;Print time: {print_time}\n;Filament used: {filament_amount}m {filament_weight}g\n;Filament cost: {filament_cost}\n;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line\n;M109 S{print_temperature} ;Uncomment to add your own temperature line\nG21        ;metric values\nG90        ;absolute positioning\nM82        ;set extruder to absolute mode\nM107       ;start with the fan off\nG28 X0 Y0  ;move X/Y to min endstops\nG28 Z0     ;move Z to max endstops\nG1 Z115.0 F{travel_speed} ;move th e platform up 20mm\nG28 Z0     ;move Z to max endstop\nG1 Z15.0 F{travel_speed} ;move the platform down 15mm\nG92 E0                  ;zero the extruded length\nG1 F200 E3              ;extrude 3mm of feed stock\nG92 E0                  ;zero the extruded length again\nG1 F{travel_speed}\nM301 H1 P26.38 I2.57 D67.78\n;Put printing message on LCD screen\nM117 Printing..."
+            "default_value": ";Sliced at: {day} {date} {time}\n;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}\n;Print time: {print_time}\n;Filament used: {filament_amount}m {filament_weight}g\n;Filament cost: {filament_cost}\n;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line\n;M109 S{print_temperature} ;Uncomment to add your own temperature line\nG21        ;metric values\nG90        ;absolute positioning\nM82        ;set extruder to absolute mode\nM107       ;start with the fan off\nG28 X0 Y0  ;move X/Y to min endstops\nG28 Z0     ;move Z to max endstops\nG1 Z115.0 F{speed_travel} ;move th e platform up 20mm\nG28 Z0     ;move Z to max endstop\nG1 Z15.0 F{speed_travel} ;move the platform down 15mm\nG92 E0                  ;zero the extruded length\nG1 F200 E3              ;extrude 3mm of feed stock\nG92 E0                  ;zero the extruded length again\nG1 F{speed_travel}\nM301 H1 P26.38 I2.57 D67.78\n;Put printing message on LCD screen\nM117 Printing..."
         },
         "machine_end_gcode": {
-            "default_value": ";End GCode\nM104 S0                     ;extruder heater off\nM140 S0                     ;heated bed heater off (if you have it)\nG91                                    ;relative positioning\nG1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more\nG28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way\nG28 Z0\nM84                         ;steppers off\nG90                         ;absolute positioning\n;{profile_string}"
+            "default_value": ";End GCode\nM104 S0                     ;extruder heater off\nM140 S0                     ;heated bed heater off (if you have it)\nG91                                    ;relative positioning\nG1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F{speed_travel} ;move Z up a bit and retract filament even more\nG28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way\nG28 Z0\nM84                         ;steppers off\nG90                         ;absolute positioning\n;{profile_string}"
         }
     }
 }

resources/definitions/anycubic_i3_mega.def.json

@@ -2,7 +2,8 @@
     "version": 2,
     "name": "Anycubic i3 Mega",
     "inherits": "fdmprinter",
-    "metadata":{
+    "metadata":
+    {
         "visible": true,
         "author": "TheTobby",
         "manufacturer": "Anycubic",
@@ -14,42 +15,55 @@
         "preferred_quality": "*normal*"
     },
 
-    "overrides":{
-        "machine_name":{
+    "overrides":
+    {
+        "machine_name":
+        {
             "default_value": "Anycubic i3 Mega"
         },
-        "machine_heated_bed":{
+        "machine_heated_bed":
+        {
             "default_value": true
         },
-        "machine_width":{
+        "machine_width":
+        {
             "default_value": 210
         },
-        "machine_height":{
+        "machine_height":
+        {
             "default_value": 205
         },
-        "machine_depth":{
+        "machine_depth":
+        {
             "default_value": 210
         },
-        "machine_center_is_zero":{
+        "machine_center_is_zero":
+        {
             "default_value": false
         },
-        "machine_nozzle_size":{
+        "machine_nozzle_size":
+        {
             "default_value": 0.4
         },
-        "material_diameter":{
+        "material_diameter":
+        {
             "default_value": 1.75
         },
-        "gantry_height":{
+        "gantry_height":
+        {
             "default_value": 0
         },
-        "machine_gcode_flavor":{
+        "machine_gcode_flavor":
+        {
             "default_value": "RepRap (Marlin/Sprinter)"
         },
-        "machine_start_gcode":{
-            "default_value":"G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG1 Z15.0 F{travel_speed} ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E3 ;extrude 3mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F{travel_speed}\nM117 Printing...\nG5"
+        "machine_start_gcode":
+        {
+            "default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG1 Z15.0 F{speed_travel} ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E3 ;extrude 3mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F{speed_travel}\nM117 Printing...\nG5"
         },
-        "machine_end_gcode":{
-            "default_value":"M104 S0 ; turn off extruder\nM140 S0 ; turn off bed\nM84 ; disable motors\nM107\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle\nto release some of the pressure\nG1 Z+0.5 E-5 ;X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more\nG28 X0 ;Y0 ;move X/Y to min endstops\nso the head is out of the way\nG1 Y180 F2000\nM84 ;steppers off\nG90\nM300 P300 S4000"
+        "machine_end_gcode":
+        {
+            "default_value": "M104 S0 ; turn off extruder\nM140 S0 ; turn off bed\nM84 ; disable motors\nM107\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle\nto release some of the pressure\nG1 Z+0.5 E-5 ;X-20 Y-20 F{speed_travel} ;move Z up a bit and retract filament even more\nG28 X0 ;Y0 ;move X/Y to min endstops\nso the head is out of the way\nG1 Y180 F2000\nM84 ;steppers off\nG90\nM300 P300 S4000"
         }
     }
 }

resources/definitions/easyarts_ares.def.json

@@ -10,7 +10,7 @@
     },
     "overrides": {
         "machine_start_gcode": {
-           "default_value": "; -- START GCODE --\nG21        ;metric values\nG90        ;absolute positioning\nM82        ;set extruder to absolute mode\nM107       ;start with the fan off\nG28        \nG29 Z0.12   ;Auto-bedleveling with Z offset        \nG92 E0                  ;zero the extruded length        \nG1 F2000 E3              ;extrude 3mm of feed stock\nG92 E0                  ;zero the extruded length again\nG1 F{travel_speed}\nM117 Printing...\n; -- end of START GCODE --"
+           "default_value": "; -- START GCODE --\nG21        ;metric values\nG90        ;absolute positioning\nM82        ;set extruder to absolute mode\nM107       ;start with the fan off\nG28        \nG29 Z0.12   ;Auto-bedleveling with Z offset        \nG92 E0                  ;zero the extruded length        \nG1 F2000 E3              ;extrude 3mm of feed stock\nG92 E0                  ;zero the extruded length again\nG1 F{speed_travel}\nM117 Printing...\n; -- end of START GCODE --"
          },
         "machine_end_gcode": {
             "default_value": "; -- START GCODE --\nG28     ; Home all axes\nM104 S0        ;extruder heater off\n;M140 S0        ;heated bed heater off (if you have it)\nG91                       ;relative positioning\nG1 E-1 F300               ;retract the filament a bit before lifting the nozzle, to release some of the pressure\n;M84            ;steppers off\nG90            ;absolute positioning\n; -- end of START GCODE --"

resources/definitions/fdmextruder.def.json

@@ -181,27 +181,6 @@
                 }
             }
         },
-        "material": {
-            "label": "Material",
-            "icon": "category_material",
-            "description": "Material",
-            "type": "category",
-            "children": {
-                "material_diameter": {
-                    "label": "Diameter",
-                    "description": "Adjusts the diameter of the filament used. Match this value with the diameter of the used filament.",
-                    "unit": "mm",
-                    "type": "float",
-                    "default_value": 2.85,
-                    "minimum_value": "0.0001",
-                    "minimum_value_warning": "0.4",
-                    "maximum_value_warning": "3.5",
-                    "enabled": "machine_gcode_flavor != \"UltiGCode\"",
-                    "settable_per_mesh": false,
-                    "settable_per_extruder": true
-                }
-            }
-        },
         "platform_adhesion":
         {
             "label": "Build Plate Adhesion",

resources/definitions/fdmprinter.def.json

@@ -154,6 +154,21 @@
                     "settable_per_extruder": false,
                     "settable_per_meshgroup": false
                 },
+                "machine_buildplate_type":
+                {
+                    "label": "Build Plate Material",
+                    "description": "The material of the build plate installed on the printer.",
+                    "default_value": "glass",
+                    "type": "enum",
+                    "options":
+                    {
+                        "glass": "Glass",
+                        "aluminium": "Aluminium"
+                    },
+                    "settable_per_mesh": false,
+                    "settable_per_extruder": false,
+                    "settable_per_meshgroup": false
+                },
                 "machine_height":
                 {
                     "label": "Machine Height",
@@ -1981,14 +1996,30 @@
                     "settable_per_mesh": false,
                     "settable_per_extruder": true
                 },
+                "default_material_bed_temperature":
+                {
+                    "label": "Default Build Plate Temperature",
+                    "description": "The default temperature used for the heated build plate. This should be the \"base\" temperature of a build plate. All other print temperatures should use offsets based on this value",
+                    "unit": "°C",
+                    "type": "float",
+                    "resolve": "max(extruderValues('default_material_bed_temperature'))",
+                    "default_value": 60,
+                    "minimum_value": "-273.15",
+                    "minimum_value_warning": "0",
+                    "maximum_value_warning": "130",
+                    "enabled": "machine_heated_bed and machine_gcode_flavor != \"UltiGCode\"",
+                    "settable_per_mesh": false,
+                    "settable_per_extruder": false,
+                    "settable_per_meshgroup": false
+                },
                 "material_bed_temperature":
                 {
                     "label": "Build Plate Temperature",
                     "description": "The temperature used for the heated build plate. If this is 0, the bed temperature will not be adjusted.",
                     "unit": "°C",
                     "type": "float",
-                    "resolve": "max(extruderValues('material_bed_temperature'))",
                     "default_value": 60,
+                    "value": "default_material_bed_temperature",
                     "minimum_value": "-273.15",
                     "minimum_value_warning": "0",
                     "maximum_value_warning": "130",

resources/definitions/tevo_blackwidow.def.json

@@ -10,44 +10,57 @@
         "icon": "icon_ultimaker2",
         "has_materials": false,
         "has_machine_quality": true,
-        "platform": "prusai3_platform.stl",
+        "platform": "tevo_blackwidow.stl",
         "preferred_quality": "*normal*"
     },
-    "overrides": {
-        "machine_name": {
+    "overrides":
+    {
+        "machine_name":
+        {
             "default_value": "Tevo Black Widow"
         },
-        "machine_heated_bed": {
+        "machine_heated_bed":
+        {
             "default_value": true
         },
-        "machine_width": {
+        "machine_width":
+        {
             "default_value": 350
         },
-        "machine_height": {
+        "machine_height":
+        {
             "default_value": 250
         },
-        "machine_depth": {
+        "machine_depth":
+        {
             "default_value": 250
         },
-        "machine_center_is_zero": {
+        "machine_center_is_zero":
+        {
             "default_value": false
         },
-        "machine_nozzle_size": {
+        "machine_nozzle_size":
+        {
             "default_value": 0.4
         },
-        "material_diameter": {
+        "material_diameter":
+        {
             "default_value": 1.75
         },
-        "gantry_height": {
+        "gantry_height":
+        {
             "default_value": 0
         },
-        "machine_gcode_flavor": {
+        "machine_gcode_flavor":
+        {
             "default_value": "RepRap (Marlin/Sprinter)"
         },
-        "machine_start_gcode": {
+        "machine_start_gcode":
+        {
             "default_value": "M280 P0 S160 ; release BLTouch alarm (OK to send for Non BLTouch)\nM420 Z2 ; set fade leveling at 2mm for BLTouch (OK to send for Non BLTouch)\nG28 ; home all\nG29 ; probe bed\nG92 E0 ;zero the extruded length\nG1 X0.0 Y50.0 Z10.0 F3600\n; perform wipe and prime\nG1 Z0.0 F1000\nG1 Z0.2 Y70.0 E9.0 F1000.0 ; prime\nG1 Y100.0 E12.5 F1000.0 ; prime\nG92 E0 ; zero extruder again\nM117 Printing..."
         },
-        "machine_end_gcode": {
+        "machine_end_gcode":
+        {
             "default_value": "G92 E0 ; zero the extruded length again\nG1 E-1.5 F500 ; retract the filament to release some of the pressure\nM104 S0 ; turn off extruder\nM140 S0 ; turn off bed\nG28 X0 ; home X axis\nG1 Y245 ; move Y axis to end position\nM84 ; disable motors\nM107 ; turn off fan"
         }
     }

resources/qml/Cura.qml

@@ -204,6 +204,7 @@ UM.MainWindow
                     onObjectRemoved: settingsMenu.removeItem(object)
                 }
 
+                BuildplateMenu { title: catalog.i18nc("@title:menu", "&Build plate"); visible: Cura.MachineManager.hasVariantBuildplates }
                 NozzleMenu { title: Cura.MachineManager.activeDefinitionVariantsName; visible: machineExtruderCount.properties.value <= 1 && Cura.MachineManager.hasVariants }
                 MaterialMenu { title: catalog.i18nc("@title:menu", "&Material"); visible: machineExtruderCount.properties.value <= 1 && Cura.MachineManager.hasMaterials }
                 ProfileMenu { title: catalog.i18nc("@title:menu", "&Profile"); visible: machineExtruderCount.properties.value <= 1 }

resources/qml/Menus/BuildplateMenu.qml

@@ -0,0 +1,87 @@
+// Copyright (c) 2018 Ultimaker B.V.
+// Cura is released under the terms of the LGPLv3 or higher.
+
+import QtQuick 2.2
+import QtQuick.Controls 1.1
+
+import UM 1.2 as UM
+import Cura 1.0 as Cura
+
+Menu
+{
+    id: menu
+    title: "Build plate"
+
+    property bool printerConnected: Cura.MachineManager.printerOutputDevices.length != 0
+    property bool isClusterPrinter:
+    {
+        if(Cura.MachineManager.printerOutputDevices.length == 0)
+        {
+            return false;
+        }
+        var clusterSize = Cura.MachineManager.printerOutputDevices[0].clusterSize;
+        // This is not a cluster printer or the cluster it is just one printer
+        if(clusterSize == undefined || clusterSize == 1)
+        {
+            return false;
+        }
+        return true;
+    }
+
+    MenuItem
+    {
+        id: automaticBuildplate
+        text:
+        {
+            if(printerConnected && Cura.MachineManager.printerOutputDevices[0].buildplateId != "" && !isClusterPrinter)
+            {
+                var buildplateName = Cura.MachineManager.printerOutputDevices[0].buildplateId
+                return catalog.i18nc("@title:menuitem %1 is the buildplate currently loaded in the printer", "Automatic: %1").arg(buildplateName)
+            }
+            return ""
+        }
+        visible: printerConnected && Cura.MachineManager.printerOutputDevices[0].buildplateId != "" && !isClusterPrinter
+        onTriggered:
+        {
+            var buildplateId = Cura.MachineManager.printerOutputDevices[0].buildplateId
+            var itemIndex = buildplateInstantiator.model.find("name", buildplateId)
+            if(itemIndex > -1)
+            {
+                Cura.MachineManager.setActiveVariantBuildplate(buildplateInstantiator.model.getItem(itemIndex).id)
+            }
+        }
+    }
+
+    MenuSeparator
+    {
+        visible: automaticBuildplate.visible
+    }
+
+    Instantiator
+    {
+        id: buildplateInstantiator
+        model: UM.InstanceContainersModel
+        {
+            filter:
+            {
+                "type": "variant",
+                "hardware_type": "buildplate",
+                "definition": Cura.MachineManager.activeDefinitionId //Only show variants of this machine
+            }
+        }
+        MenuItem {
+            text: model.name
+            checkable: true
+            checked: model.id == Cura.MachineManager.globalVariantId
+            exclusiveGroup: group
+            onTriggered:
+            {
+                Cura.MachineManager.setActiveVariantBuildplate(model.id);
+            }
+        }
+        onObjectAdded: menu.insertItem(index, object)
+        onObjectRemoved: menu.removeItem(object)
+    }
+
+    ExclusiveGroup { id: group }
+}

resources/qml/Menus/NozzleMenu.qml

@@ -67,10 +67,19 @@ Menu
         model: UM.InstanceContainersModel
         {
             filter:
+            {
+                var filter_dict =
                 {
                     "type": "variant",
                     "definition": Cura.MachineManager.activeQualityDefinitionId //Only show variants of this machine
                 }
+                if (Cura.MachineManager.hasVariantBuildplates)
+                {
+                    filter_dict["hardware_type"] = "nozzle"
+                }
+
+                return filter_dict
+            }
         }
         MenuItem {
             text: model.name

resources/qml/Preferences/MachinesPage.qml

@@ -143,7 +143,7 @@ UM.ManagementPage
             property bool printerConnected: Cura.MachineManager.printerOutputDevices.length != 0
             property var connectedPrinter: printerConnected ? Cura.MachineManager.printerOutputDevices[0] : null
             property bool printerAcceptsCommands: printerConnected && Cura.MachineManager.printerOutputDevices[0].acceptsCommands
-
+            property var printJob: connectedPrinter != null ? connectedPrinter.activePrintJob: null
             Label
             {
                 text: catalog.i18nc("@label", "Printer type:")
@@ -178,7 +178,12 @@ UM.ManagementPage
                         return "";
                     }
 
-                    switch(Cura.MachineManager.printerOutputDevices[0].jobState)
+                    if (machineInfo.printJob == null)
+                    {
+                        return catalog.i18nc("@label:MonitorStatus", "Waiting for a printjob");
+                    }
+
+                    switch(machineInfo.printJob.state)
                     {
                         case "printing":
                             return catalog.i18nc("@label:MonitorStatus", "Printing...");
@@ -194,10 +199,9 @@ UM.ManagementPage
                             return catalog.i18nc("@label:MonitorStatus", "In maintenance. Please check the printer");
                         case "abort":  // note sure if this jobState actually occurs in the wild
                             return catalog.i18nc("@label:MonitorStatus", "Aborting print...");
-                        case "ready":  // ready to print or getting ready
-                        case "":  // ready to print or getting ready
-                            return catalog.i18nc("@label:MonitorStatus", "Waiting for a printjob");
+
                     }
+                    return ""
                 }
                 visible: base.currentItem && base.currentItem.id == Cura.MachineManager.activeMachineId && machineInfo.printerAcceptsCommands
                 wrapMode: Text.WordWrap

resources/qml/Preferences/MaterialView.qml

@@ -72,7 +72,7 @@ TabView
                     width: scrollView.columnWidth;
                     text: properties.name;
                     readOnly: !base.editingEnabled;
-                    onEditingFinished: base.setName(properties.name, text)
+                    onEditingFinished: base.updateMaterialDisplayName(properties.name, text)
                 }
 
                 Label { width: scrollView.columnWidth; height: parent.rowHeight; verticalAlignment: Qt.AlignVCenter; text: catalog.i18nc("@label", "Brand") }
@@ -82,11 +82,7 @@ TabView
                     width: scrollView.columnWidth;
                     text: properties.supplier;
                     readOnly: !base.editingEnabled;
-                    onEditingFinished:
-                    {
-                        base.setMetaDataEntry("brand", properties.supplier, text);
-                        pane.objectList.currentIndex = pane.getIndexById(base.containerId);
-                    }
+                    onEditingFinished: base.updateMaterialSupplier(properties.supplier, text)
                 }
 
                 Label { width: scrollView.columnWidth; height: parent.rowHeight; verticalAlignment: Qt.AlignVCenter; text: catalog.i18nc("@label", "Material Type") }
@@ -95,15 +91,10 @@ TabView
                     width: scrollView.columnWidth;
                     text: properties.material_type;
                     readOnly: !base.editingEnabled;
-                    onEditingFinished:
-                    {
-                        base.setMetaDataEntry("material", properties.material_type, text);
-                        pane.objectList.currentIndex = pane.getIndexById(base.containerId)
-                    }
+                    onEditingFinished: base.updateMaterialType(properties.material_type, text)
                 }
 
                 Label { width: scrollView.columnWidth; height: parent.rowHeight; verticalAlignment: Qt.AlignVCenter; text: catalog.i18nc("@label", "Color") }
-
                 Row {
                     width: scrollView.columnWidth
                     height:  parent.rowHeight
@@ -128,13 +119,6 @@ TabView
                         }
                     }
 
-                    // make sure the color stays connected after changing the color
-                    Binding {
-                        target: colorSelector
-                        property: "color"
-                        value: properties.color_code
-                    }
-
                     // pretty color name text field
                     ReadOnlyTextField {
                         id: colorLabel;
@@ -453,14 +437,28 @@ TabView
         return 0;
     }
 
-    function setName(old_value, new_value)
-    {
-        if(old_value != new_value)
-        {
-            Cura.ContainerManager.setContainerName(base.containerId, new_value);
-            // update material name label. not so pretty, but it works
-            materialProperties.name = new_value;
-            pane.objectList.currentIndex = pane.getIndexById(base.containerId)
-        }
+    // update the display name of the material
+    function updateMaterialDisplayName (old_name, new_name) {
+
+        // don't change when new name is the same
+        if (old_name == new_name) {
+            return
+        }
+
+        // update the values
+        Cura.ContainerManager.setContainerName(base.containerId, new_name)
+        materialProperties.name = new_name
+    }
+
+    // update the type of the material
+    function updateMaterialType (old_type, new_type) {
+        base.setMetaDataEntry("material", old_type, new_type)
+        materialProperties.material_type = new_type
+    }
+
+    // update the supplier of the material
+    function updateMaterialSupplier (old_supplier, new_supplier) {
+        base.setMetaDataEntry("brand", old_supplier, new_supplier)
+        materialProperties.supplier = new_supplier
     }
 }

resources/qml/Preferences/MaterialsPage.qml

@@ -153,15 +153,6 @@ UM.ManagementPage
                 forceActiveFocus()
                 Cura.ContainerManager.createMaterial()
             }
-
-            Connections
-            {
-                target: base.objectList.model
-                onItemsChanged:
-                {
-                    base.objectList.currentIndex = base.getIndexById(Cura.MachineManager.activeMaterialId);
-                }
-            }
         },
 
         // Duplicate button

resources/qml/Preferences/ProfilesPage.qml

@@ -213,8 +213,8 @@ UM.ManagementPage
             ProfileTab
             {
                 title: catalog.i18nc("@title:tab", "Global Settings");
-                quality: base.currentItem != null ? base.currentItem.id : "";
-                material: Cura.MachineManager.allActiveMaterialIds[Cura.MachineManager.activeMachineId]
+                quality: Cura.MachineManager.activeMachine.qualityChanges.id
+                material: Cura.MachineManager.activeMachine.material.id
             }
 
             Repeater

resources/qml/SaveButton.qml

@@ -170,8 +170,8 @@ Item {
 
             tooltip: [1, 5].indexOf(base.backendState) != -1 ? catalog.i18nc("@info:tooltip","Slice current printjob") : catalog.i18nc("@info:tooltip","Cancel slicing process")
             // 1 = not started, 2 = Processing
-            enabled: base.backendState != "undefined" && (base.backendState == 1 || base.backendState == 2) && base.activity == true
-            visible: base.backendState != "undefined" && !autoSlice && (base.backendState == 1 || base.backendState == 2) && base.activity == true
+            enabled: base.backendState != "undefined" && ([1, 2].indexOf(base.backendState) != -1) && base.activity
+            visible: base.backendState != "undefined" && !autoSlice && ([1, 2, 4].indexOf(base.backendState) != -1) && base.activity
             property bool autoSlice
             height: UM.Theme.getSize("save_button_save_to_button").height
 
@@ -179,8 +179,8 @@ Item {
             anchors.right: parent.right
             anchors.rightMargin: UM.Theme.getSize("sidebar_margin").width
 
-            // 1 = not started, 5 = disabled
-            text: [1, 5].indexOf(base.backendState) != -1 ? catalog.i18nc("@label:Printjob", "Prepare") : catalog.i18nc("@label:Printjob", "Cancel")
+            // 1 = not started, 4 = error, 5 = disabled
+            text: [1, 4, 5].indexOf(base.backendState) != -1 ? catalog.i18nc("@label:Printjob", "Prepare") : catalog.i18nc("@label:Printjob", "Cancel")
             onClicked:
             {
                 sliceOrStopSlicing();

resources/qml/Settings/SettingTextField.qml

@@ -135,14 +135,6 @@ SettingItem
                 }
             }
 
-            onEditingFinished:
-            {
-                if (textHasChanged)
-                {
-                    propertyProvider.setPropertyValue("value", text)
-                }
-            }
-
             onActiveFocusChanged:
             {
                 if(activeFocus)

resources/qml/Settings/SettingView.qml

@@ -63,11 +63,9 @@ Item
             menu: ProfileMenu { }
 
             function generateActiveQualityText () {
-                var result = catalog.i18nc("@", "No Profile Available") // default text
+                var result = Cura.MachineManager.activeQualityName;
 
                 if (Cura.MachineManager.isActiveQualitySupported) {
-                    result = Cura.MachineManager.activeQualityName
-
                     if (Cura.MachineManager.activeQualityLayerHeight > 0) {
                         result += " <font color=\"" + UM.Theme.getColor("text_detail") + "\">"
                         result += " - "

resources/qml/Sidebar.qml

@@ -96,7 +96,7 @@ Rectangle
     SidebarHeader {
         id: header
         width: parent.width
-        visible: (machineExtruderCount.properties.value > 1 || Cura.MachineManager.hasMaterials || Cura.MachineManager.hasVariants) && !monitoringPrint
+        visible: !hideSettings && (machineExtruderCount.properties.value > 1 || Cura.MachineManager.hasMaterials || Cura.MachineManager.hasVariants) && !monitoringPrint
         anchors.top: machineSelection.bottom
 
         onShowTooltip: base.showTooltip(item, location, text)
@@ -128,7 +128,7 @@ Rectangle
         text: !hideSettings ? catalog.i18nc("@label:listbox", "Print Setup") : catalog.i18nc("@label:listbox", "Print Setup disabled\nG-code files cannot be modified")
         anchors.left: parent.left
         anchors.leftMargin: UM.Theme.getSize("sidebar_margin").width
-        anchors.top: headerSeparator.bottom
+        anchors.top: hideSettings ? machineSelection.bottom : headerSeparator.bottom
         anchors.topMargin: UM.Theme.getSize("sidebar_margin").height
         width: Math.floor(parent.width * 0.45)
         font: UM.Theme.getFont("large")

resources/qml/SidebarHeader.qml

@@ -314,6 +314,62 @@ Column
         }
     }
 
+    //Buildplate row separator
+    Rectangle {
+        id: separator
+
+        anchors.leftMargin: UM.Theme.getSize("sidebar_margin").width
+        anchors.rightMargin: UM.Theme.getSize("sidebar_margin").width
+        anchors.horizontalCenter: parent.horizontalCenter
+        visible: buildplateRow.visible
+        width: parent.width - UM.Theme.getSize("sidebar_margin").width * 2
+        height: visible ? UM.Theme.getSize("sidebar_lining_thin").height / 2 : 0
+        color: UM.Theme.getColor("sidebar_lining_thin")
+    }
+
+    //Buildplate row
+    Item
+    {
+        id: buildplateRow
+        height: UM.Theme.getSize("sidebar_setup").height
+        visible: Cura.MachineManager.hasVariantBuildplates && !sidebar.monitoringPrint && !sidebar.hideSettings
+
+        anchors
+        {
+            left: parent.left
+            leftMargin: UM.Theme.getSize("sidebar_margin").width
+            right: parent.right
+            rightMargin: UM.Theme.getSize("sidebar_margin").width
+        }
+
+        Label
+        {
+            id: bulidplateLabel
+            text: catalog.i18nc("@label", "Build plate");
+            width: Math.floor(parent.width * 0.45 - UM.Theme.getSize("default_margin").width)
+            font: UM.Theme.getFont("default");
+            color: UM.Theme.getColor("text");
+        }
+
+        ToolButton {
+            id: buildplateSelection
+            text: Cura.MachineManager.activeVariantBuildplateName
+            tooltip: Cura.MachineManager.activeVariantBuildplateName
+            visible: Cura.MachineManager.hasVariantBuildplates
+
+            height: UM.Theme.getSize("setting_control").height
+            width: Math.floor(parent.width * 0.7 + UM.Theme.getSize("sidebar_margin").width)
+            anchors.right: parent.right
+            style: UM.Theme.styles.sidebar_header_button
+            activeFocusOnPress: true;
+
+            menu: BuildplateMenu {}
+
+            property var valueError: !Cura.MachineManager.variantBuildplateCompatible && !Cura.MachineManager.variantBuildplateUsable
+            property var valueWarning: Cura.MachineManager.variantBuildplateUsable
+        }
+    }
+
     // Material info row
     Item
     {

resources/themes/cura-dark/theme.json

@@ -43,6 +43,7 @@
         "sidebar_header_text_hover": [255, 255, 255, 255],
         "sidebar_header_text_inactive": [255, 255, 255, 127],
         "sidebar_lining": [31, 36, 39, 255],
+        "sidebar_lining_thin": [255, 255, 255, 30],
 
         "button": [39, 44, 48, 255],
         "button_hover": [39, 44, 48, 255],

resources/themes/cura-light/styles.qml

@@ -864,9 +864,10 @@ QtObject {
                 }
             }
             label: Label {
-                text: control.text;
-                color: Theme.getColor("checkbox_text");
-                font: Theme.getFont("default");
+                text: control.text
+                color: Theme.getColor("checkbox_text")
+                font: Theme.getFont("default")
+                elide: Text.ElideRight
             }
         }
     }

resources/themes/cura-light/theme.json

@@ -91,6 +91,7 @@
         "sidebar_header_text_active": [255, 255, 255, 255],
         "sidebar_header_text_hover": [255, 255, 255, 255],
         "sidebar_lining": [245, 245, 245, 255],
+        "sidebar_lining_thin": [127, 127, 127, 255],
 
         "button": [31, 36, 39, 255],
         "button_hover": [68, 72, 75, 255],