Applied printer-linter format

2025-08-09 23:05:01 -06:00 · 2024-02-16 08:05:52 +00:00 · 2024-02-16 08:05:52 +00:00 · 6c8ee8d98a
commit 6c8ee8d98a
parent 5a291f9ba9
42 changed files with 42 additions and 42 deletions
--- a/resources/definitions/deltacomb_dc20flux.def.json
+++ b/resources/definitions/deltacomb_dc20flux.def.json
@ -31,8 +31,8 @@
        "material_final_print_temperature": { "value": "material_print_temperature" },
        "material_initial_print_temperature": { "value": "material_print_temperature" },
        "material_standby_temperature": { "value": "material_print_temperature" },
-        "prime_tower_mode": { "value": "normal" },
        "prime_tower_min_volume": { "value": "50" },
+        "prime_tower_mode": { "value": "normal" },
        "switch_extruder_retraction_amount": { "value": "0" }
    }
 }
--- a/resources/definitions/deltacomb_dc21flux.def.json
+++ b/resources/definitions/deltacomb_dc21flux.def.json
@ -31,8 +31,8 @@
        "material_final_print_temperature": { "value": "material_print_temperature" },
        "material_initial_print_temperature": { "value": "material_print_temperature" },
        "material_standby_temperature": { "value": "material_print_temperature" },
-        "prime_tower_mode": { "value": "normal" },
        "prime_tower_min_volume": { "value": "50" },
+        "prime_tower_mode": { "value": "normal" },
        "switch_extruder_retraction_amount": { "value": "0" }
    }
 }
--- a/resources/definitions/deltacomb_dc30flux.def.json
+++ b/resources/definitions/deltacomb_dc30flux.def.json
@ -31,8 +31,8 @@
        "material_final_print_temperature": { "value": "material_print_temperature" },
        "material_initial_print_temperature": { "value": "material_print_temperature" },
        "material_standby_temperature": { "value": "material_print_temperature" },
-        "prime_tower_mode": { "value": "normal" },
        "prime_tower_min_volume": { "value": "50" },
+        "prime_tower_mode": { "value": "normal" },
        "switch_extruder_retraction_amount": { "value": "0" }
    }
 }
--- a/resources/definitions/elegoo_neptune_2D.def.json
+++ b/resources/definitions/elegoo_neptune_2D.def.json
@ -55,8 +55,8 @@
            "settable_per_extruder": false
        },
        "prime_blob_enable": { "default_value": false },
-        "prime_tower_mode": { "default_value": "normal" },
        "prime_tower_min_volume": { "default_value": 90 },
+        "prime_tower_mode": { "default_value": "normal" },
        "prime_tower_size": { "default_value": 30 },
        "raft_airgap": { "default_value": 0.25 },
        "raft_margin": { "default_value": 5 },
--- a/resources/definitions/lotmaxx_sc60.def.json
+++ b/resources/definitions/lotmaxx_sc60.def.json
@ -44,8 +44,8 @@
        "machine_width": { "default_value": 235 },
        "meshfix_maximum_resolution": { "value": 0.25 },
        "optimize_wall_printing_order": { "value": true },
-        "prime_tower_mode": { "value": "normal" },
        "prime_tower_min_volume": { "value": 30 },
+        "prime_tower_mode": { "value": "normal" },
        "retract_at_layer_change": { "value": false },
        "retraction_amount": { "value": 4.5 },
        "roofing_layer_count": { "value": 1 },
--- a/resources/definitions/strateo3d_IDEX420.def.json
+++ b/resources/definitions/strateo3d_IDEX420.def.json
@ -112,8 +112,8 @@
        "machine_use_extruder_offset_to_offset_coords": { "default_value": false },
        "machine_width": { "default_value": 420 },
        "material_diameter": { "default_value": 1.75 },
-        "prime_tower_mode": { "default_value": "normal" },
        "prime_tower_min_volume": { "default_value": 35.6 },
+        "prime_tower_mode": { "default_value": "normal" },
        "raft_acceleration": { "value": "machine_acceleration" },
        "raft_base_acceleration": { "value": "machine_acceleration" },
        "raft_interface_acceleration": { "value": "machine_acceleration" },
--- a/resources/definitions/ultimaker_method_base.def.json
+++ b/resources/definitions/ultimaker_method_base.def.json
@ -346,9 +346,9 @@
        "prime_tower_base_curve_magnitude": { "value": 2 },
        "prime_tower_base_height": { "value": 6 },
        "prime_tower_base_size": { "value": 10 },
-        "prime_tower_mode": { "value": "none" },
        "prime_tower_flow": { "value": "material_flow" },
        "prime_tower_line_width": { "value": 1 },
+        "prime_tower_mode": { "value": "none" },
        "prime_tower_raft_base_line_spacing": { "value": "raft_base_line_width" },
        "prime_tower_wipe_enabled": { "value": true },
        "print_sequence": { "enabled": false },
--- a/resources/quality/Leapfrog_Bolt_Pro/abs/Leapfrog_Bolt_Pro_brass0.4_abs_natural_standard.inst.cfg
+++ b/resources/quality/Leapfrog_Bolt_Pro/abs/Leapfrog_Bolt_Pro_brass0.4_abs_natural_standard.inst.cfg
@ -38,8 +38,8 @@ line_width = 0.4
 min_infill_area = 0
 optimize_wall_printing_order = True
 prime_tower_brim_enable = True
-prime_tower_mode = normal
 prime_tower_min_volume = 6
+prime_tower_mode = normal
 prime_tower_size = 20
 prime_tower_wipe_enabled = True
 retract_at_layer_change = False
--- a/resources/quality/Leapfrog_Bolt_Pro/abs/Leapfrog_Bolt_Pro_nozzlex0.4_abs_natural_standard.inst.cfg
+++ b/resources/quality/Leapfrog_Bolt_Pro/abs/Leapfrog_Bolt_Pro_nozzlex0.4_abs_natural_standard.inst.cfg
@ -38,8 +38,8 @@ line_width = 0.4
 min_infill_area = 0
 optimize_wall_printing_order = True
 prime_tower_brim_enable = True
-prime_tower_mode = normal
 prime_tower_min_volume = 6
+prime_tower_mode = normal
 prime_tower_size = 20
 prime_tower_wipe_enabled = True
 retract_at_layer_change = False
--- a/resources/quality/Leapfrog_Bolt_Pro/epla/Leapfrog_Bolt_Pro_brass0.4_epla_natural_standard.inst.cfg
+++ b/resources/quality/Leapfrog_Bolt_Pro/epla/Leapfrog_Bolt_Pro_brass0.4_epla_natural_standard.inst.cfg
@ -36,8 +36,8 @@ line_width = 0.4
 min_infill_area = 0
 optimize_wall_printing_order = True
 prime_tower_brim_enable = True
-prime_tower_mode = normal
 prime_tower_min_volume = 6
+prime_tower_mode = normal
 prime_tower_size = 20
 prime_tower_wipe_enabled = True
 retract_at_layer_change = False
--- a/resources/quality/Leapfrog_Bolt_Pro/epla/Leapfrog_Bolt_Pro_nozzlex0.4_epla_natural_standard.inst.cfg
+++ b/resources/quality/Leapfrog_Bolt_Pro/epla/Leapfrog_Bolt_Pro_nozzlex0.4_epla_natural_standard.inst.cfg
@ -36,8 +36,8 @@ line_width = 0.4
 min_infill_area = 0
 optimize_wall_printing_order = True
 prime_tower_brim_enable = True
-prime_tower_mode = normal
 prime_tower_min_volume = 6
+prime_tower_mode = normal
 prime_tower_size = 20
 prime_tower_wipe_enabled = True
 retract_at_layer_change = False
--- a/resources/quality/Leapfrog_Bolt_Pro/pva/Leapfrog_Bolt_Pro_brass0.4_pva_natural_standard.inst.cfg
+++ b/resources/quality/Leapfrog_Bolt_Pro/pva/Leapfrog_Bolt_Pro_brass0.4_pva_natural_standard.inst.cfg
@ -35,8 +35,8 @@ line_width = 0.4
 min_infill_area = 0
 optimize_wall_printing_order = True
 prime_tower_brim_enable = True
-prime_tower_mode = normal
 prime_tower_min_volume = 6
+prime_tower_mode = normal
 prime_tower_size = 20
 prime_tower_wipe_enabled = True
 retract_at_layer_change = False
--- a/resources/quality/Leapfrog_Bolt_Pro/pva/Leapfrog_Bolt_Pro_nozzlex0.4_pva_natural_standard.inst.cfg
+++ b/resources/quality/Leapfrog_Bolt_Pro/pva/Leapfrog_Bolt_Pro_nozzlex0.4_pva_natural_standard.inst.cfg
@ -35,8 +35,8 @@ line_width = 0.4
 min_infill_area = 0
 optimize_wall_printing_order = True
 prime_tower_brim_enable = True
-prime_tower_mode = normal
 prime_tower_min_volume = 6
+prime_tower_mode = normal
 prime_tower_size = 20
 prime_tower_wipe_enabled = True
 retract_at_layer_change = False
--- a/resources/quality/liquid/liquid_vo0.8_PP_Draft_Print.inst.cfg
+++ b/resources/quality/liquid/liquid_vo0.8_PP_Draft_Print.inst.cfg
@ -26,9 +26,9 @@ material_print_temperature = =default_material_print_temperature - 2
 material_print_temperature_layer_0 = =default_material_print_temperature + 2
 material_standby_temperature = 100
 multiple_mesh_overlap = 0.2
-prime_tower_mode = normal
 prime_tower_flow = 100
 prime_tower_min_volume = 10
+prime_tower_mode = normal
 retract_at_layer_change = False
 retraction_count_max = 12
 retraction_extra_prime_amount = 0.5
--- a/resources/quality/liquid/liquid_vo0.8_PP_Superdraft_Print.inst.cfg
+++ b/resources/quality/liquid/liquid_vo0.8_PP_Superdraft_Print.inst.cfg
@ -26,9 +26,9 @@ material_print_temperature = =default_material_print_temperature + 2
 material_print_temperature_layer_0 = =default_material_print_temperature + 2
 material_standby_temperature = 100
 multiple_mesh_overlap = 0.2
-prime_tower_mode = normal
 prime_tower_flow = 100
 prime_tower_min_volume = 20
+prime_tower_mode = normal
 retract_at_layer_change = False
 retraction_count_max = 12
 retraction_extra_prime_amount = 0.5
--- a/resources/quality/liquid/liquid_vo0.8_PP_Verydraft_Print.inst.cfg
+++ b/resources/quality/liquid/liquid_vo0.8_PP_Verydraft_Print.inst.cfg
@ -25,9 +25,9 @@ material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature_layer_0 = =default_material_print_temperature + 2
 material_standby_temperature = 100
 multiple_mesh_overlap = 0.2
-prime_tower_mode = normal
 prime_tower_flow = 100
 prime_tower_min_volume = 15
+prime_tower_mode = normal
 retract_at_layer_change = False
 retraction_count_max = 12
 retraction_extra_prime_amount = 0.5
--- a/resources/quality/liquid/liquid_vo0.8_TPU_Draft_Print.inst.cfg
+++ b/resources/quality/liquid/liquid_vo0.8_TPU_Draft_Print.inst.cfg
@ -30,8 +30,8 @@ material_print_temperature = =default_material_print_temperature - 2
 material_print_temperature_layer_0 = =material_print_temperature + 19
 material_standby_temperature = 100
 multiple_mesh_overlap = 0.2
-prime_tower_mode = normal
 prime_tower_flow = 100
+prime_tower_mode = normal
 retract_at_layer_change = False
 retraction_count_max = 12
 retraction_extra_prime_amount = 0.5
--- a/resources/quality/liquid/liquid_vo0.8_TPU_Superdraft_Print.inst.cfg
+++ b/resources/quality/liquid/liquid_vo0.8_TPU_Superdraft_Print.inst.cfg
@ -31,8 +31,8 @@ material_print_temperature = =default_material_print_temperature + 2
 material_print_temperature_layer_0 = =material_print_temperature + 15
 material_standby_temperature = 100
 multiple_mesh_overlap = 0.2
-prime_tower_mode = normal
 prime_tower_flow = 100
+prime_tower_mode = normal
 retract_at_layer_change = False
 retraction_count_max = 12
 retraction_extra_prime_amount = 0.5
--- a/resources/quality/liquid/liquid_vo0.8_TPU_Verydraft_Print.inst.cfg
+++ b/resources/quality/liquid/liquid_vo0.8_TPU_Verydraft_Print.inst.cfg
@ -30,8 +30,8 @@ material_initial_print_temperature = =material_print_temperature
 material_print_temperature_layer_0 = =material_print_temperature + 17
 material_standby_temperature = 100
 multiple_mesh_overlap = 0.2
-prime_tower_mode = normal
 prime_tower_flow = 100
+prime_tower_mode = normal
 retract_at_layer_change = False
 retraction_count_max = 12
 retraction_extra_prime_amount = 0.5
--- a/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_Flex_Only_Quality.inst.cfg
+++ b/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_Flex_Only_Quality.inst.cfg
@ -22,8 +22,8 @@ material_final_print_temperature = =material_print_temperature
 material_initial_print_temperature = =material_print_temperature
 material_print_temperature = =default_material_print_temperature
 optimize_wall_printing_order = True
-prime_tower_mode = normal
 prime_tower_flow = 110
+prime_tower_mode = normal
 prime_tower_size = 35
 retraction_min_travel = 2
 skirt_gap = 2
--- a/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_Flex_Quality.inst.cfg
+++ b/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_Flex_Quality.inst.cfg
@ -19,8 +19,8 @@ material_final_print_temperature = =material_print_temperature
 material_initial_print_temperature = =material_print_temperature
 material_print_temperature = =default_material_print_temperature
 optimize_wall_printing_order = True
-prime_tower_mode = normal
 prime_tower_flow = 110
+prime_tower_mode = normal
 prime_tower_size = 35
 retraction_hop_enabled = False
 support_enable = True
--- a/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_High_Quality.inst.cfg
+++ b/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_High_Quality.inst.cfg
@ -30,8 +30,8 @@ material_flow_layer_0 = 93
 material_initial_print_temperature = =material_print_temperature
 material_print_temperature = =default_material_print_temperature
 optimize_wall_printing_order = True
-prime_tower_mode = normal
 prime_tower_flow = 110
+prime_tower_mode = normal
 prime_tower_size = 35
 retraction_amount = 5
 retraction_hop_enabled = False
--- a/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_Normal_Quality.inst.cfg
+++ b/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_Normal_Quality.inst.cfg
@ -30,8 +30,8 @@ material_flow_layer_0 = 93
 material_initial_print_temperature = =material_print_temperature
 material_print_temperature = =default_material_print_temperature
 optimize_wall_printing_order = True
-prime_tower_mode = normal
 prime_tower_flow = 110
+prime_tower_mode = normal
 prime_tower_size = 35
 retraction_amount = 5
 retraction_hop_enabled = False
--- a/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_PVA_Quality.inst.cfg
+++ b/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_PVA_Quality.inst.cfg
@ -19,8 +19,8 @@ material_final_print_temperature = =material_print_temperature
 material_initial_print_temperature = =material_print_temperature
 material_print_temperature = =default_material_print_temperature
 optimize_wall_printing_order = True
-prime_tower_mode = normal
 prime_tower_flow = 110
+prime_tower_mode = normal
 prime_tower_size = 35
 retraction_hop_enabled = False
 support_enable = True
--- a/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg
@ -16,9 +16,9 @@ brim_width = 25
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral'
 material_print_temperature = =default_material_print_temperature + 11
 multiple_mesh_overlap = 0.2
-prime_tower_mode = normal
 prime_tower_flow = 100
 prime_tower_min_volume = 10
+prime_tower_mode = normal
 retraction_count_max = 15
 retraction_extra_prime_amount = 0.5
 retraction_hop = 0.5
--- a/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg
@ -16,9 +16,9 @@ brim_width = 25
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral'
 material_print_temperature = =default_material_print_temperature + 15
 multiple_mesh_overlap = 0.2
-prime_tower_mode = normal
 prime_tower_flow = 100
 prime_tower_min_volume = 20
+prime_tower_mode = normal
 retraction_count_max = 15
 retraction_extra_prime_amount = 0.5
 retraction_hop = 0.5
--- a/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg
@ -17,9 +17,9 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral'
 layer_height = 0.3
 material_print_temperature = =default_material_print_temperature + 13
 multiple_mesh_overlap = 0.2
-prime_tower_mode = normal
 prime_tower_flow = 100
 prime_tower_min_volume = 15
+prime_tower_mode = normal
 retraction_count_max = 15
 retraction_extra_prime_amount = 0.5
 retraction_hop = 0.5
--- a/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg
@ -23,8 +23,8 @@ material_flow = 105
 material_initial_print_temperature = =material_print_temperature - 10
 material_print_temperature = =default_material_print_temperature - 4
 multiple_mesh_overlap = 0.2
-prime_tower_mode = normal
 prime_tower_flow = 100
+prime_tower_mode = normal
 retraction_count_max = 15
 retraction_extra_prime_amount = 0.5
 retraction_hop = 1.5
--- a/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg
@ -23,8 +23,8 @@ material_final_print_temperature = =material_print_temperature - 10
 material_flow = 105
 material_initial_print_temperature = =material_print_temperature - 10
 multiple_mesh_overlap = 0.2
-prime_tower_mode = normal
 prime_tower_flow = 100
+prime_tower_mode = normal
 retraction_count_max = 15
 retraction_extra_prime_amount = 0.5
 retraction_hop = 1.5
--- a/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg
@ -24,8 +24,8 @@ material_flow = 105
 material_initial_print_temperature = =material_print_temperature - 10
 material_print_temperature = =default_material_print_temperature - 2
 multiple_mesh_overlap = 0.2
-prime_tower_mode = normal
 prime_tower_flow = 100
+prime_tower_mode = normal
 retraction_count_max = 15
 retraction_extra_prime_amount = 0.5
 retraction_hop = 1.5
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.2mm.inst.cfg
@ -18,9 +18,9 @@ material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 10
 material_print_temperature = =default_material_print_temperature + 11
 multiple_mesh_overlap = 0.2
-prime_tower_mode = normal
 prime_tower_flow = 100
 prime_tower_min_volume = 10
+prime_tower_mode = normal
 retraction_count_max = 15
 retraction_extra_prime_amount = 0.5
 retraction_hop = 0.5
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.3mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.3mm.inst.cfg
@ -18,9 +18,9 @@ material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 10
 material_print_temperature = =default_material_print_temperature + 13
 multiple_mesh_overlap = 0.2
-prime_tower_mode = normal
 prime_tower_flow = 100
 prime_tower_min_volume = 15
+prime_tower_mode = normal
 retraction_count_max = 15
 retraction_extra_prime_amount = 0.5
 retraction_hop = 0.5
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.4mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.4mm.inst.cfg
@ -18,9 +18,9 @@ material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 10
 material_print_temperature = =default_material_print_temperature + 15
 multiple_mesh_overlap = 0.2
-prime_tower_mode = normal
 prime_tower_flow = 100
 prime_tower_min_volume = 20
+prime_tower_mode = normal
 retraction_count_max = 15
 retraction_extra_prime_amount = 0.5
 retraction_hop = 0.5
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.2mm.inst.cfg
@ -21,8 +21,8 @@ material_flow = 105
 material_initial_print_temperature = =material_print_temperature - 10
 material_print_temperature = =default_material_print_temperature - 4
 multiple_mesh_overlap = 0.2
-prime_tower_mode = normal
 prime_tower_flow = 100
+prime_tower_mode = normal
 retraction_count_max = 15
 retraction_extra_prime_amount = 0.5
 retraction_hop = 1.5
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.3mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.3mm.inst.cfg
@ -22,8 +22,8 @@ material_flow = 105
 material_initial_print_temperature = =material_print_temperature - 10
 material_print_temperature = =default_material_print_temperature - 2
 multiple_mesh_overlap = 0.2
-prime_tower_mode = normal
 prime_tower_flow = 100
+prime_tower_mode = normal
 retraction_count_max = 15
 retraction_extra_prime_amount = 0.5
 retraction_hop = 1.5
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.4mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.4mm.inst.cfg
@ -21,8 +21,8 @@ material_final_print_temperature = =material_print_temperature - 10
 material_flow = 105
 material_initial_print_temperature = =material_print_temperature - 10
 multiple_mesh_overlap = 0.2
-prime_tower_mode = normal
 prime_tower_flow = 100
+prime_tower_mode = normal
 retraction_count_max = 15
 retraction_extra_prime_amount = 0.5
 retraction_hop = 1.5
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.2mm.inst.cfg
@ -18,9 +18,9 @@ material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 10
 material_print_temperature = =default_material_print_temperature + 11
 multiple_mesh_overlap = 0.2
-prime_tower_mode = normal
 prime_tower_flow = 100
 prime_tower_min_volume = 10
+prime_tower_mode = normal
 retraction_count_max = 15
 retraction_extra_prime_amount = 0.5
 retraction_hop = 0.5
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.3mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.3mm.inst.cfg
@ -18,9 +18,9 @@ material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 10
 material_print_temperature = =default_material_print_temperature + 13
 multiple_mesh_overlap = 0.2
-prime_tower_mode = normal
 prime_tower_flow = 100
 prime_tower_min_volume = 15
+prime_tower_mode = normal
 retraction_count_max = 15
 retraction_extra_prime_amount = 0.5
 retraction_hop = 0.5
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.4mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.4mm.inst.cfg
@ -18,9 +18,9 @@ material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 10
 material_print_temperature = =default_material_print_temperature + 15
 multiple_mesh_overlap = 0.2
-prime_tower_mode = normal
 prime_tower_flow = 100
 prime_tower_min_volume = 20
+prime_tower_mode = normal
 retraction_count_max = 15
 retraction_extra_prime_amount = 0.5
 retraction_hop = 0.5
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.2mm.inst.cfg
@ -21,8 +21,8 @@ material_flow = 105
 material_initial_print_temperature = =material_print_temperature - 10
 material_print_temperature = =default_material_print_temperature - 4
 multiple_mesh_overlap = 0.2
-prime_tower_mode = normal
 prime_tower_flow = 100
+prime_tower_mode = normal
 retraction_count_max = 15
 retraction_extra_prime_amount = 0.5
 retraction_hop = 1.5
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.3mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.3mm.inst.cfg
@ -22,8 +22,8 @@ material_flow = 105
 material_initial_print_temperature = =material_print_temperature - 10
 material_print_temperature = =default_material_print_temperature - 2
 multiple_mesh_overlap = 0.2
-prime_tower_mode = normal
 prime_tower_flow = 100
+prime_tower_mode = normal
 retraction_count_max = 15
 retraction_extra_prime_amount = 0.5
 retraction_hop = 1.5
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.4mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.4mm.inst.cfg
@ -21,8 +21,8 @@ material_final_print_temperature = =material_print_temperature - 10
 material_flow = 105
 material_initial_print_temperature = =material_print_temperature - 10
 multiple_mesh_overlap = 0.2
-prime_tower_mode = normal
 prime_tower_flow = 100
+prime_tower_mode = normal
 retraction_count_max = 15
 retraction_extra_prime_amount = 0.5
 retraction_hop = 1.5