Merge branch 'main' into SearchAndReplace

resources/definitions/ultimaker_sketch_sprint.def.json

@@ -129,7 +129,7 @@
             ]
         },
         "infill_before_walls": { "value": false },
-        "infill_line_width": { "value": 0.45 },
+        "infill_line_width": { "value": "0.45 if layer_height == 0.2 else 0.4" },
         "infill_overlap": { "value": 10 },
         "infill_pattern": { "value": "'lines'" },
         "infill_sparse_density": { "value": 15 },

resources/intent/ultimaker_sketch_sprint/um_sketch_sprint_0.4mm_um-pla-175_0.27mm_draft.inst.cfg

@@ -0,0 +1,54 @@
+[general]
+definition = ultimaker_sketch_sprint
+name = Draft
+version = 4
+
+[metadata]
+intent_category = draft
+is_experimental = True
+material = ultimaker_pla_175
+quality_type = imperial
+setting_version = 24
+type = intent
+variant = 0.4mm
+
+[values]
+acceleration_layer_0 = 5000
+acceleration_print = 20000
+acceleration_roofing = 5000
+acceleration_topbottom = 10000
+acceleration_travel_layer_0 = 5000
+acceleration_wall_0 = 5000.0
+acceleration_wall_0_roofing = 5000
+acceleration_wall_x = 10000
+acceleration_wall_x_roofing = 5000
+cool_fan_full_at_height = 0.54
+cool_min_layer_time = 2
+cool_min_speed = 50
+cool_min_temperature = 220
+infill_angles = [135]
+infill_line_width = 0.4
+infill_overlap = 25
+infill_pattern = zigzag
+infill_wipe_dist = 0.05
+initial_layer_line_width_factor = 125
+line_width = 0.4
+material_final_print_temperature = 225
+material_initial_print_temperature = 225
+material_print_temperature = 225
+retraction_hop_enabled = True
+seam_overhang_angle = 25
+speed_layer_0 = 70
+speed_print = 270
+speed_roofing = 215
+speed_support_bottom = 100
+speed_support_interface = 215
+speed_topbottom = 215
+speed_wall = 215
+speed_wall_x = 270
+speed_wall_x_roofing = 270
+support_line_width = 0.35
+wall_line_width_x = 0.4
+wall_overhang_angle = 25
+wall_overhang_speed_factor = 15
+

resources/intent/ultimaker_sketch_sprint/um_sketch_sprint_0.4mm_um-tough-pla-175_0.27mm_draft.inst.cfg

@@ -0,0 +1,54 @@
+[general]
+definition = ultimaker_sketch_sprint
+name = Draft
+version = 4
+
+[metadata]
+intent_category = draft
+is_experimental = True
+material = ultimaker_tough_pla_175
+quality_type = imperial
+setting_version = 24
+type = intent
+variant = 0.4mm
+
+[values]
+acceleration_layer_0 = 5000
+acceleration_print = 20000
+acceleration_roofing = 5000
+acceleration_topbottom = 10000
+acceleration_travel_layer_0 = 5000
+acceleration_wall_0 = 5000.0
+acceleration_wall_0_roofing = 5000
+acceleration_wall_x = 10000
+acceleration_wall_x_roofing = 5000
+cool_fan_full_at_height = 0.54
+cool_min_layer_time = 2
+cool_min_speed = 50
+cool_min_temperature = 220
+infill_angles = [135]
+infill_line_width = 0.4
+infill_overlap = 25
+infill_pattern = zigzag
+infill_wipe_dist = 0.05
+initial_layer_line_width_factor = 125
+line_width = 0.4
+material_final_print_temperature = 225
+material_initial_print_temperature = 225
+material_print_temperature = 225
+retraction_hop_enabled = True
+seam_overhang_angle = 25
+speed_layer_0 = 70
+speed_print = 270
+speed_roofing = 215
+speed_support_bottom = 100
+speed_support_interface = 215
+speed_topbottom = 215
+speed_wall = 215
+speed_wall_x = 270
+speed_wall_x_roofing = 270
+support_line_width = 0.35
+wall_line_width_x = 0.4
+wall_overhang_angle = 25
+wall_overhang_speed_factor = 15
+

resources/quality/ultimaker_sketch_sprint/um_sketch_sprint_0.4mm_um-pla-175_0.27mm.inst.cfg

@@ -0,0 +1,16 @@
+[general]
+definition = ultimaker_sketch_sprint
+name = Extra Fast - Experimental
+version = 4
+
+[metadata]
+is_experimental = True
+material = ultimaker_pla_175
+quality_type = imperial
+setting_version = 24
+type = quality
+variant = 0.4mm
+weight = -3
+
+[values]
+

resources/quality/ultimaker_sketch_sprint/um_sketch_sprint_0.4mm_um-tough-pla-175_0.27mm.inst.cfg

@@ -0,0 +1,23 @@
+[general]
+definition = ultimaker_sketch_sprint
+name = Extra Fast - Experimental
+version = 4
+
+[metadata]
+is_experimental = True
+material = ultimaker_tough_pla_175
+quality_type = imperial
+setting_version = 24
+type = quality
+variant = 0.4mm
+weight = -3
+
+[values]
+acceleration_layer_0 = 200
+acceleration_travel_layer_0 = =acceleration_layer_0
+speed_layer_0 = 30
+speed_slowdown_layers = 4
+speed_travel_layer_0 = 150
+wall_0_material_flow_layer_0 = =material_flow * 1.03
+wall_x_material_flow_layer_0 = =material_flow * 0.95
+

resources/quality/ultimaker_sketch_sprint/um_sketch_sprint_global_Imperial_Quality.inst.cfg

@@ -0,0 +1,15 @@
+[general]
+definition = ultimaker_sketch_sprint
+name = Extra Fast
+version = 4
+
+[metadata]
+global_quality = True
+quality_type = imperial
+setting_version = 24
+type = quality
+weight = -2
+
+[values]
+layer_height = 0.27
+