3D-printing/Cura
1
0
Fork 0
mirror of https://github.com/Ultimaker/Cura.git synced 2025-08-07 14:04:03 -06:00
Code Issues Projects Releases Packages Wiki Activity Actions 9

Removed Tree Support from labels

Browse source 
Shorten the label because it is already clear
This commit is contained in:
Jelle Spijker 2023-04-28 11:59:40 +02:00
parent ff7d75374a
commit 64767aa2ce
No known key found for this signature in database
GPG key ID: 034D1C0527888B65
1 changed files with 13 additions and 13 deletions
Download patch file Download diff file Expand all files Collapse all files

26
resources/definitions/fdmprinter.def.json
View file

@ -4564,7 +4564,7 @@
},
"support_tree_angle":
{
"label": "Tree Support Maximum Branch Angle",
"label": "Maximum Branch Angle",
"description": "The maximum angle of the branches while they grow around the model. Use a lower angle to make them more vertical and more stable. Use a higher angle to be able to have more reach.",
"unit": "\u00b0",
"type": "float",
@ -4581,7 +4581,7 @@
},
"support_tree_branch_diameter":
{
"label": "Tree Support Branch Diameter",
"label": "Branch Diameter",
"description": "The diameter of the thinnest branches of tree support. Thicker branches are more sturdy. Branches towards the base will be thicker than this.",
"unit": "mm",
"type": "float",
@ -4595,7 +4595,7 @@
},
"support_tree_max_diameter":
{
"label": "Tree Support Trunk Diameter",
"label": "Trunk Diameter",
"description": "The diameter of the widest branches of tree support. A thicker trunk is more sturdy; a thinner trunk takes up less space on the build plate.",
"unit": "mm",
"type": "float",
@ -4609,7 +4609,7 @@
},
"support_tree_branch_diameter_angle":
{
"label": "Tree Support Branch Diameter Angle",
"label": "Branch Diameter Angle",
"description": "The angle of the branches' diameter as they gradually become thicker towards the bottom. An angle of 0 will cause the branches to have uniform thickness over their length. A bit of an angle can increase stability of the tree support.",
"unit": "\u00b0",
"type": "float",
@ -4640,7 +4640,7 @@
},
"support_tree_angle_slow":
{
"label": "Tree Support Preferred Branch Angle",
"label": "Preferred Branch Angle",
"description": "The preferred angle of the branches, when they do not have to avoid the model. Use a lower angle to make them more vertical and more stable. Use a higher angle for branches to merge faster.",
"unit": "\u00b0",
"type": "float",
@ -4657,7 +4657,7 @@
},
"support_tree_max_diameter_increase_by_merges_when_support_to_model":
{
"label": "Tree Support Diameter Increase To Model",
"label": "Diameter Increase To Model",
"description": "The most the diameter of a branch that has to connect to the model may increase by merging with branches that could reach the buildplate. Increasing this reduces print time, but increases the area of support that rests on model",
"unit": "mm",
"type": "float",
@ -4670,7 +4670,7 @@
},
"support_tree_min_height_to_model":
{
"label": "Tree Support Minimum Height To Model",
"label": "Minimum Height To Model",
"description": "How tall a branch has to be if it is placed on the model. Prevents small blobs of support. This setting is ignored when a branch is supporting a support roof.",
"unit": "mm",
"type": "float",
@ -4684,7 +4684,7 @@
},
"support_tree_bp_diameter":
{
"label": "Tree Support Initial Layer Diameter",
"label": "Initial Layer Diameter",
"description": "Diameter every branch tries to achieve when reaching the buildplate. Improves bed adhesion.",
"unit": "mm",
"type": "float",
@ -4698,7 +4698,7 @@
},
"support_tree_top_rate":
{
"label": "Tree Support Branch Density",
"label": "Branch Density",
"description": "Adjusts the density of the support structure used to generate the tips of the branches. A higher value results in better overhangs, but the supports are harder to remove. Use Support Roof for very high values or ensure support density is similarly high at the top.",
"unit": "%",
"type": "float",
@ -4714,7 +4714,7 @@
},
"support_tree_tip_diameter":
{
"label": "Tree Support Tip Diameter",
"label": "Tip Diameter",
"description": "The diameter of the top of the tip of the branches of tree support.",
"unit": "mm",
"type": "float",
@ -4729,7 +4729,7 @@
},
"support_tree_limit_branch_reach":
{
"label": "Tree Support Limit Branch Reach",
"label": "Limit Branch Reach",
"description": "Limit how far each branch should travel from the point it supports. This can make the support more sturdy, but will increase the amount of branches (and because of that material usage/print time)",
"type": "bool",
"default_value": true,
@ -4738,7 +4738,7 @@
},
"support_tree_branch_reach_limit":
{
"label": "Tree Support Optimal Branch Range",
"label": "Optimal Branch Range",
"description": "A recomendation to how far branches can move from the points they support. Branches can violate this value to reach their destination (buildplate or a flat part of the model). Lowering this value will make the support more sturdy, but increase the amount of branches (and because of that material usage/print time) ",
"unit": "mm",
"type": "float",
@ -4750,7 +4750,7 @@
},
"support_tree_rest_preference":
{
"label": "Tree Support Rest Preference",
"label": "Rest Preference",
"description": "The preferred placement of the support structures. If structures can't be placed at the preferred location, they will be place elsewhere, even if that means placing them on the model.",
"type": "enum",
"options":