diff --git a/resources/quality/ultimaker_method/um_method_1a_um-pla-175_0.2mm.inst.cfg b/resources/quality/ultimaker_method/um_method_1a_um-pla-175_0.2mm.inst.cfg
index 6c9f4b0839..df002a46a2 100644
--- a/resources/quality/ultimaker_method/um_method_1a_um-pla-175_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_method/um_method_1a_um-pla-175_0.2mm.inst.cfg
@@ -21,15 +21,14 @@ cool_min_layer_time = 10
 cool_min_speed = 5
 cool_min_temperature = 205
 infill_sparse_density = 15
-material_final_print_temperature = 205
-material_initial_print_temperature = 205
-material_print_temperature_layer_0 = 225
+material_final_print_temperature = =default_material_print_temperature - 5
+material_initial_print_temperature = =default_material_print_temperature - 5
+material_print_temperature_layer_0 = =default_material_print_temperature +15
 min_bead_width = =line_width * 0.75
 min_wall_line_width = =line_width * 0.75
 raft_airgap = 0.18
 raft_base_line_spacing = =4 if extruder_nr == support_extruder_nr else 2.8
 raft_base_line_width = =1.2 if extruder_nr == support_extruder_nr else 1.4
-raft_base_speed = 15
 raft_base_thickness = 0.6
 raft_interface_infill_overlap = 25
 raft_interface_layers = 1
diff --git a/resources/quality/ultimaker_method/um_method_1c_um-nylon12-cf-175_0.2mm.inst.cfg b/resources/quality/ultimaker_method/um_method_1c_um-nylon12-cf-175_0.2mm.inst.cfg
index 068530ed53..735c96dce3 100644
--- a/resources/quality/ultimaker_method/um_method_1c_um-nylon12-cf-175_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_method/um_method_1c_um-nylon12-cf-175_0.2mm.inst.cfg
@@ -16,10 +16,10 @@ cool_fan_enabled = False
 material_final_print_temperature = =default_material_print_temperature-5
 material_initial_print_temperature = =default_material_print_temperature-5
 raft_airgap = 0.3
-raft_base_line_spacing = =3 if extruder_nr == raft_interface_extruder_nr else 2
-raft_base_line_width = =1.2 if extruder_nr == raft_interface_extruder_nr else 1
+raft_base_line_spacing = =3 if extruder_nr == support_extruder_nr else 2
+raft_base_line_width = =1.2 if extruder_nr == support_extruder_nr else 1
 raft_base_speed = 10
-raft_base_thickness = =0.6 if extruder_nr == raft_interface_extruder_nr else 0.4
+raft_base_thickness = =0.6 if extruder_nr == support_extruder_nr else 0.4
 retraction_amount = 0.5
 retraction_min_travel = 3.2
 small_skin_width = 3.6
diff --git a/resources/quality/ultimaker_method/um_method_1c_um-pla-175_0.2mm.inst.cfg b/resources/quality/ultimaker_method/um_method_1c_um-pla-175_0.2mm.inst.cfg
index 40939a12a7..1fb9fe52c6 100644
--- a/resources/quality/ultimaker_method/um_method_1c_um-pla-175_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_method/um_method_1c_um-pla-175_0.2mm.inst.cfg
@@ -21,15 +21,14 @@ cool_min_layer_time = 10
 cool_min_speed = 5
 cool_min_temperature = 205
 infill_sparse_density = 15
-material_final_print_temperature = 205
-material_initial_print_temperature = 205
-material_print_temperature_layer_0 = 225
+material_final_print_temperature = =default_material_print_temperature - 5
+material_initial_print_temperature = =default_material_print_temperature - 5
+material_print_temperature_layer_0 = =default_material_print_temperature +15
 min_bead_width = =line_width * 0.75
 min_wall_line_width = =line_width * 0.75
 raft_airgap = 0.18
 raft_base_line_spacing = =4 if extruder_nr == support_extruder_nr else 2.8
 raft_base_line_width = =1.2 if extruder_nr == support_extruder_nr else 1.4
-raft_base_speed = 15
 raft_base_thickness = 0.6
 raft_interface_infill_overlap = 25
 raft_interface_layers = 1
diff --git a/resources/quality/ultimaker_method/um_method_2a_um-pva-175_0.2mm.inst.cfg b/resources/quality/ultimaker_method/um_method_2a_um-pva-175_0.2mm.inst.cfg
index 4b663f4502..56cf644ab8 100644
--- a/resources/quality/ultimaker_method/um_method_2a_um-pva-175_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_method/um_method_2a_um-pva-175_0.2mm.inst.cfg
@@ -17,8 +17,8 @@ cool_fan_enabled = False
 cool_min_speed = 5
 cool_min_temperature = =material_print_temperature
 initial_layer_line_width_factor = 300
-material_final_print_temperature = 210
-material_initial_print_temperature = 210
+material_final_print_temperature = =default_material_print_temperature
+material_initial_print_temperature = =default_material_print_temperature
 prime_tower_flow = 125
 raft_airgap = 0.0
 raft_interface_flow = 110
diff --git a/resources/quality/ultimaker_method/um_method_labs_um-nylon12-cf-175_0.2mm.inst.cfg b/resources/quality/ultimaker_method/um_method_labs_um-nylon12-cf-175_0.2mm.inst.cfg
index d037282ad6..8110479fad 100644
--- a/resources/quality/ultimaker_method/um_method_labs_um-nylon12-cf-175_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_method/um_method_labs_um-nylon12-cf-175_0.2mm.inst.cfg
@@ -16,10 +16,10 @@ cool_fan_enabled = False
 material_final_print_temperature = =default_material_print_temperature-5
 material_initial_print_temperature = =default_material_print_temperature-5
 raft_airgap = 0.3
-raft_base_line_spacing = =3 if extruder_nr == raft_interface_extruder_nr else 2
-raft_base_line_width = =1.2 if extruder_nr == raft_interface_extruder_nr else 1
+raft_base_line_spacing = =3 if extruder_nr == support_extruder_nr else 2
+raft_base_line_width = =1.2 if extruder_nr == support_extruder_nr else 1
 raft_base_speed = 10
-raft_base_thickness = =0.6 if extruder_nr == raft_interface_extruder_nr else 0.4
+raft_base_thickness = =0.6 if extruder_nr == support_extruder_nr else 0.4
 retraction_amount = 0.5
 retraction_min_travel = 3.2
 small_skin_width = 3.6
diff --git a/resources/quality/ultimaker_method/um_method_labs_um-pla-175_0.2mm.inst.cfg b/resources/quality/ultimaker_method/um_method_labs_um-pla-175_0.2mm.inst.cfg
index 2b8c5d62ad..a101cda60a 100644
--- a/resources/quality/ultimaker_method/um_method_labs_um-pla-175_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_method/um_method_labs_um-pla-175_0.2mm.inst.cfg
@@ -21,15 +21,14 @@ cool_min_layer_time = 10
 cool_min_speed = 5
 cool_min_temperature = 205
 infill_sparse_density = 15
-material_final_print_temperature = 205
-material_initial_print_temperature = 205
-material_print_temperature_layer_0 = 225
+material_final_print_temperature = =default_material_print_temperature - 5
+material_initial_print_temperature = =default_material_print_temperature - 5
+material_print_temperature_layer_0 = =default_material_print_temperature +15
 min_bead_width = =line_width * 0.75
 min_wall_line_width = =line_width * 0.75
 raft_airgap = 0.18
 raft_base_line_spacing = =4 if extruder_nr == support_extruder_nr else 2.8
 raft_base_line_width = =1.2 if extruder_nr == support_extruder_nr else 1.4
-raft_base_speed = 15
 raft_base_thickness = 0.6
 raft_interface_infill_overlap = 25
 raft_interface_layers = 1
diff --git a/resources/quality/ultimaker_methodx/um_methodx_1a_um-pla-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodx/um_methodx_1a_um-pla-175_0.2mm.inst.cfg
index 0544546849..adee1fb2c8 100644
--- a/resources/quality/ultimaker_methodx/um_methodx_1a_um-pla-175_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_methodx/um_methodx_1a_um-pla-175_0.2mm.inst.cfg
@@ -21,15 +21,14 @@ cool_min_layer_time = 10
 cool_min_speed = 5
 cool_min_temperature = 205
 infill_sparse_density = 15
-material_final_print_temperature = 205
-material_initial_print_temperature = 205
-material_print_temperature_layer_0 = 225
+material_final_print_temperature = =default_material_print_temperature - 5
+material_initial_print_temperature = =default_material_print_temperature - 5
+material_print_temperature_layer_0 = =default_material_print_temperature +15
 min_bead_width = =line_width * 0.75
 min_wall_line_width = =line_width * 0.75
 raft_airgap = 0.18
 raft_base_line_spacing = =4 if extruder_nr == support_extruder_nr else 2.8
 raft_base_line_width = =1.2 if extruder_nr == support_extruder_nr else 1.4
-raft_base_speed = 15
 raft_base_thickness = 0.6
 raft_interface_infill_overlap = 25
 raft_interface_layers = 1
diff --git a/resources/quality/ultimaker_methodx/um_methodx_1c_um-nylon12-cf-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodx/um_methodx_1c_um-nylon12-cf-175_0.2mm.inst.cfg
index 6dc8c68993..c3b8af89c4 100644
--- a/resources/quality/ultimaker_methodx/um_methodx_1c_um-nylon12-cf-175_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_methodx/um_methodx_1c_um-nylon12-cf-175_0.2mm.inst.cfg
@@ -16,10 +16,10 @@ cool_fan_enabled = False
 material_final_print_temperature = =default_material_print_temperature-5
 material_initial_print_temperature = =default_material_print_temperature-5
 raft_airgap = 0.3
-raft_base_line_spacing = =3 if extruder_nr == raft_interface_extruder_nr else 2
-raft_base_line_width = =1.2 if extruder_nr == raft_interface_extruder_nr else 1
+raft_base_line_spacing = =3 if extruder_nr == support_extruder_nr else 2
+raft_base_line_width = =1.2 if extruder_nr == support_extruder_nr else 1
 raft_base_speed = 10
-raft_base_thickness = =0.6 if extruder_nr == raft_interface_extruder_nr else 0.4
+raft_base_thickness = =0.6 if extruder_nr == support_extruder_nr else 0.4
 retraction_amount = 0.5
 retraction_min_travel = 3.2
 small_skin_width = 3.6
diff --git a/resources/quality/ultimaker_methodx/um_methodx_1c_um-pla-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodx/um_methodx_1c_um-pla-175_0.2mm.inst.cfg
index e1455f3846..dcd5c5c37e 100644
--- a/resources/quality/ultimaker_methodx/um_methodx_1c_um-pla-175_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_methodx/um_methodx_1c_um-pla-175_0.2mm.inst.cfg
@@ -21,15 +21,14 @@ cool_min_layer_time = 10
 cool_min_speed = 5
 cool_min_temperature = 205
 infill_sparse_density = 15
-material_final_print_temperature = 205
-material_initial_print_temperature = 205
-material_print_temperature_layer_0 = 225
+material_final_print_temperature = =default_material_print_temperature - 5
+material_initial_print_temperature = =default_material_print_temperature - 5
+material_print_temperature_layer_0 = =default_material_print_temperature +15
 min_bead_width = =line_width * 0.75
 min_wall_line_width = =line_width * 0.75
 raft_airgap = 0.18
 raft_base_line_spacing = =4 if extruder_nr == support_extruder_nr else 2.8
 raft_base_line_width = =1.2 if extruder_nr == support_extruder_nr else 1.4
-raft_base_speed = 15
 raft_base_thickness = 0.6
 raft_interface_infill_overlap = 25
 raft_interface_layers = 1
diff --git a/resources/quality/ultimaker_methodx/um_methodx_2a_um-pva-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodx/um_methodx_2a_um-pva-175_0.2mm.inst.cfg
index 749e9e6326..b9ae42fd5b 100644
--- a/resources/quality/ultimaker_methodx/um_methodx_2a_um-pva-175_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_methodx/um_methodx_2a_um-pva-175_0.2mm.inst.cfg
@@ -17,8 +17,8 @@ cool_fan_enabled = False
 cool_min_speed = 5
 cool_min_temperature = =material_print_temperature
 initial_layer_line_width_factor = 300
-material_final_print_temperature = 210
-material_initial_print_temperature = 210
+material_final_print_temperature = =default_material_print_temperature
+material_initial_print_temperature = =default_material_print_temperature
 prime_tower_flow = 125
 raft_airgap = 0.0
 raft_interface_flow = 110
diff --git a/resources/quality/ultimaker_methodx/um_methodx_labs_um-nylon12-cf-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodx/um_methodx_labs_um-nylon12-cf-175_0.2mm.inst.cfg
index df6f8cf7a4..c61b20431a 100644
--- a/resources/quality/ultimaker_methodx/um_methodx_labs_um-nylon12-cf-175_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_methodx/um_methodx_labs_um-nylon12-cf-175_0.2mm.inst.cfg
@@ -16,10 +16,10 @@ cool_fan_enabled = False
 material_final_print_temperature = =default_material_print_temperature-5
 material_initial_print_temperature = =default_material_print_temperature-5
 raft_airgap = 0.3
-raft_base_line_spacing = =3 if extruder_nr == raft_interface_extruder_nr else 2
-raft_base_line_width = =1.2 if extruder_nr == raft_interface_extruder_nr else 1
+raft_base_line_spacing = =3 if extruder_nr == support_extruder_nr else 2
+raft_base_line_width = =1.2 if extruder_nr == support_extruder_nr else 1
 raft_base_speed = 10
-raft_base_thickness = =0.6 if extruder_nr == raft_interface_extruder_nr else 0.4
+raft_base_thickness = =0.6 if extruder_nr == support_extruder_nr else 0.4
 retraction_amount = 0.5
 retraction_min_travel = 3.2
 small_skin_width = 3.6
diff --git a/resources/quality/ultimaker_methodx/um_methodx_labs_um-pla-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodx/um_methodx_labs_um-pla-175_0.2mm.inst.cfg
index 1af35b4b3b..14e3abc264 100644
--- a/resources/quality/ultimaker_methodx/um_methodx_labs_um-pla-175_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_methodx/um_methodx_labs_um-pla-175_0.2mm.inst.cfg
@@ -21,15 +21,14 @@ cool_min_layer_time = 10
 cool_min_speed = 5
 cool_min_temperature = 205
 infill_sparse_density = 15
-material_final_print_temperature = 205
-material_initial_print_temperature = 205
-material_print_temperature_layer_0 = 225
+material_final_print_temperature = =default_material_print_temperature - 5
+material_initial_print_temperature = =default_material_print_temperature - 5
+material_print_temperature_layer_0 = =default_material_print_temperature +15
 min_bead_width = =line_width * 0.75
 min_wall_line_width = =line_width * 0.75
 raft_airgap = 0.18
 raft_base_line_spacing = =4 if extruder_nr == support_extruder_nr else 2.8
 raft_base_line_width = =1.2 if extruder_nr == support_extruder_nr else 1.4
-raft_base_speed = 15
 raft_base_thickness = 0.6
 raft_interface_infill_overlap = 25
 raft_interface_layers = 1
diff --git a/resources/quality/ultimaker_methodxl/um_methodxl_1a_um-pla-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodxl/um_methodxl_1a_um-pla-175_0.2mm.inst.cfg
index 2b19e0e9cc..d50d793924 100644
--- a/resources/quality/ultimaker_methodxl/um_methodxl_1a_um-pla-175_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_methodxl/um_methodxl_1a_um-pla-175_0.2mm.inst.cfg
@@ -21,15 +21,14 @@ cool_min_layer_time = 10
 cool_min_speed = 5
 cool_min_temperature = 205
 infill_sparse_density = 15
-material_final_print_temperature = 205
-material_initial_print_temperature = 205
-material_print_temperature_layer_0 = 225
+material_final_print_temperature = =default_material_print_temperature - 5
+material_initial_print_temperature = =default_material_print_temperature - 5
+material_print_temperature_layer_0 = =default_material_print_temperature +15
 min_bead_width = =line_width * 0.75
 min_wall_line_width = =line_width * 0.75
 raft_airgap = 0.18
 raft_base_line_spacing = =4 if extruder_nr == support_extruder_nr else 2.8
 raft_base_line_width = =1.2 if extruder_nr == support_extruder_nr else 1.4
-raft_base_speed = 15
 raft_base_thickness = 0.6
 raft_interface_infill_overlap = 25
 raft_interface_line_spacing = 0.75
diff --git a/resources/quality/ultimaker_methodxl/um_methodxl_1c_um-nylon12-cf-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodxl/um_methodxl_1c_um-nylon12-cf-175_0.2mm.inst.cfg
index 517deb32d7..d0d5d6f5e8 100644
--- a/resources/quality/ultimaker_methodxl/um_methodxl_1c_um-nylon12-cf-175_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_methodxl/um_methodxl_1c_um-nylon12-cf-175_0.2mm.inst.cfg
@@ -16,10 +16,10 @@ cool_fan_enabled = False
 material_final_print_temperature = =default_material_print_temperature-5
 material_initial_print_temperature = =default_material_print_temperature-5
 raft_airgap = 0.3
-raft_base_line_spacing = =3 if extruder_nr == raft_interface_extruder_nr else 2
-raft_base_line_width = =1.2 if extruder_nr == raft_interface_extruder_nr else 1
+raft_base_line_spacing = =3 if extruder_nr == support_extruder_nr else 2
+raft_base_line_width = =1.2 if extruder_nr == support_extruder_nr else 1
 raft_base_speed = 10
-raft_base_thickness = =0.6 if extruder_nr == raft_interface_extruder_nr else 0.4
+raft_base_thickness = =0.6 if extruder_nr == support_extruder_nr else 0.4
 retraction_amount = 0.5
 retraction_min_travel = 3.2
 small_skin_width = 3.6
diff --git a/resources/quality/ultimaker_methodxl/um_methodxl_1c_um-pla-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodxl/um_methodxl_1c_um-pla-175_0.2mm.inst.cfg
index 0d1ba71075..e3dbf7911c 100644
--- a/resources/quality/ultimaker_methodxl/um_methodxl_1c_um-pla-175_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_methodxl/um_methodxl_1c_um-pla-175_0.2mm.inst.cfg
@@ -21,15 +21,14 @@ cool_min_layer_time = 10
 cool_min_speed = 5
 cool_min_temperature = 205
 infill_sparse_density = 15
-material_final_print_temperature = 205
-material_initial_print_temperature = 205
-material_print_temperature_layer_0 = 225
+material_final_print_temperature = =default_material_print_temperature - 5
+material_initial_print_temperature = =default_material_print_temperature - 5
+material_print_temperature_layer_0 = =default_material_print_temperature +15
 min_bead_width = =line_width * 0.75
 min_wall_line_width = =line_width * 0.75
 raft_airgap = 0.18
 raft_base_line_spacing = =4 if extruder_nr == support_extruder_nr else 2.8
 raft_base_line_width = =1.2 if extruder_nr == support_extruder_nr else 1.4
-raft_base_speed = 15
 raft_base_thickness = 0.6
 raft_interface_infill_overlap = 25
 raft_interface_line_spacing = 0.75
diff --git a/resources/quality/ultimaker_methodxl/um_methodxl_2a_um-pva-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodxl/um_methodxl_2a_um-pva-175_0.2mm.inst.cfg
index 1b9a52537b..f2f797f010 100644
--- a/resources/quality/ultimaker_methodxl/um_methodxl_2a_um-pva-175_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_methodxl/um_methodxl_2a_um-pva-175_0.2mm.inst.cfg
@@ -17,8 +17,8 @@ cool_fan_enabled = False
 cool_min_speed = 5
 cool_min_temperature = =material_print_temperature
 initial_layer_line_width_factor = 300
-material_final_print_temperature = 210
-material_initial_print_temperature = 210
+material_final_print_temperature = =default_material_print_temperature
+material_initial_print_temperature = =default_material_print_temperature
 prime_tower_flow = 125
 raft_airgap = 0.0
 raft_interface_flow = 110
diff --git a/resources/quality/ultimaker_methodxl/um_methodxl_labs_um-nylon12-cf-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodxl/um_methodxl_labs_um-nylon12-cf-175_0.2mm.inst.cfg
index 69a0b13ea2..a75c479cbd 100644
--- a/resources/quality/ultimaker_methodxl/um_methodxl_labs_um-nylon12-cf-175_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_methodxl/um_methodxl_labs_um-nylon12-cf-175_0.2mm.inst.cfg
@@ -16,10 +16,10 @@ cool_fan_enabled = False
 material_final_print_temperature = =default_material_print_temperature-5
 material_initial_print_temperature = =default_material_print_temperature-5
 raft_airgap = 0.3
-raft_base_line_spacing = =3 if extruder_nr == raft_interface_extruder_nr else 2
-raft_base_line_width = =1.2 if extruder_nr == raft_interface_extruder_nr else 1
+raft_base_line_spacing = =3 if extruder_nr == support_extruder_nr else 2
+raft_base_line_width = =1.2 if extruder_nr == support_extruder_nr else 1
 raft_base_speed = 10
-raft_base_thickness = =0.6 if extruder_nr == raft_interface_extruder_nr else 0.4
+raft_base_thickness = =0.6 if extruder_nr == support_extruder_nr else 0.4
 retraction_amount = 0.5
 retraction_min_travel = 3.2
 small_skin_width = 3.6
diff --git a/resources/quality/ultimaker_methodxl/um_methodxl_labs_um-pla-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodxl/um_methodxl_labs_um-pla-175_0.2mm.inst.cfg
index b18136ca23..55fee9f30f 100644
--- a/resources/quality/ultimaker_methodxl/um_methodxl_labs_um-pla-175_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_methodxl/um_methodxl_labs_um-pla-175_0.2mm.inst.cfg
@@ -21,15 +21,14 @@ cool_min_layer_time = 10
 cool_min_speed = 5
 cool_min_temperature = 205
 infill_sparse_density = 15
-material_final_print_temperature = 205
-material_initial_print_temperature = 205
-material_print_temperature_layer_0 = 225
+material_final_print_temperature = =default_material_print_temperature - 5
+material_initial_print_temperature = =default_material_print_temperature - 5
+material_print_temperature_layer_0 = =default_material_print_temperature +15
 min_bead_width = =line_width * 0.75
 min_wall_line_width = =line_width * 0.75
 raft_airgap = 0.18
 raft_base_line_spacing = =4 if extruder_nr == support_extruder_nr else 2.8
 raft_base_line_width = =1.2 if extruder_nr == support_extruder_nr else 1.4
-raft_base_speed = 15
 raft_base_thickness = 0.6
 raft_interface_infill_overlap = 25
 raft_interface_line_spacing = 0.75