Change prime_tower_enable to prime_tower_mode in all defs/profiles

resources/variants/liquid/liquid_vo08.inst.cfg

@@ -37,7 +37,7 @@ material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 5
 material_standby_temperature = 100
 multiple_mesh_overlap = 0
-prime_tower_enable = False
+prime_tower_mode = none
 prime_tower_wipe_enabled = True
 retract_at_layer_change = =not magic_spiralize
 retraction_amount = 3

resources/variants/strateo3d/strateo3d_high_temp_04.inst.cfg

@@ -14,7 +14,7 @@ layer_height_0 = 0.3
 machine_nozzle_id = HT0.4
 machine_nozzle_size = 0.4
 machine_nozzle_tip_outer_diameter = 1.0
-prime_tower_enable = True
+prime_tower_mode = normal
 retract_at_layer_change = False
 support_angle = 45
 support_use_towers = True

resources/variants/strateo3d/strateo3d_standard_04.inst.cfg

@@ -14,7 +14,7 @@ layer_height_0 = 0.3
 machine_nozzle_id = Standard 0.4
 machine_nozzle_size = 0.4
 machine_nozzle_tip_outer_diameter = 1.0
-prime_tower_enable = True
+prime_tower_mode = normal
 retract_at_layer_change = False
 support_angle = 60
 support_use_towers = True

resources/variants/strateo3d/strateo3d_standard_06.inst.cfg

@@ -14,7 +14,7 @@ layer_height_0 = 0.4
 machine_nozzle_id = Standard 0.6
 machine_nozzle_size = 0.6
 machine_nozzle_tip_outer_diameter = 1.5
-prime_tower_enable = True
+prime_tower_mode = normal
 retract_at_layer_change = False
 support_angle = 55
 support_use_towers = True

resources/variants/strateo3d/strateo3d_standard_08.inst.cfg

@@ -14,7 +14,7 @@ layer_height_0 = 0.5
 machine_nozzle_id = Standard 0.8
 machine_nozzle_size = 0.8
 machine_nozzle_tip_outer_diameter = 2.0
-prime_tower_enable = True
+prime_tower_mode = normal
 retract_at_layer_change = True
 support_angle = 50
 support_use_towers = True

resources/variants/strateo3d/strateo3d_standard_10.inst.cfg

@@ -14,7 +14,7 @@ layer_height_0 = 0.6
 machine_nozzle_id = Standard 1.0 Experimental
 machine_nozzle_size = 1.0
 machine_nozzle_tip_outer_diameter = 2.5
-prime_tower_enable = True
+prime_tower_mode = normal
 retract_at_layer_change = True
 support_angle = 50
 support_use_towers = True

resources/variants/strateo3d/strateo3d_standard_12.inst.cfg

@@ -14,7 +14,7 @@ layer_height_0 = 0.7
 machine_nozzle_id = Standard 1.2 Experimental
 machine_nozzle_size = 1.2
 machine_nozzle_tip_outer_diameter = 3.0
-prime_tower_enable = True
+prime_tower_mode = normal
 retract_at_layer_change = True
 support_angle = 50
 support_use_towers = True

resources/variants/ultimaker3_aa0.8.inst.cfg

@@ -23,7 +23,7 @@ machine_nozzle_id = AA 0.8
 machine_nozzle_size = 0.8
 machine_nozzle_tip_outer_diameter = 2.0
 multiple_mesh_overlap = 0
-prime_tower_enable = False
+prime_tower_mode = none
 prime_tower_wipe_enabled = True
 raft_surface_layers = 1
 retraction_amount = 6.5

resources/variants/ultimaker3_bb0.8.inst.cfg

@@ -26,7 +26,7 @@ machine_nozzle_id = BB 0.8
 machine_nozzle_size = 0.8
 machine_nozzle_tip_outer_diameter = 2.0
 multiple_mesh_overlap = 0
-prime_tower_enable = False
+prime_tower_mode = none
 prime_tower_wipe_enabled = True
 raft_surface_layers = 1
 retraction_hop = 2

resources/variants/ultimaker3_extended_aa0.8.inst.cfg

@@ -23,7 +23,7 @@ machine_nozzle_id = AA 0.8
 machine_nozzle_size = 0.8
 machine_nozzle_tip_outer_diameter = 2.0
 multiple_mesh_overlap = 0
-prime_tower_enable = False
+prime_tower_mode = none
 prime_tower_wipe_enabled = True
 raft_surface_layers = 1
 retraction_amount = 6.5

resources/variants/ultimaker3_extended_bb0.8.inst.cfg

@@ -26,7 +26,7 @@ machine_nozzle_id = BB 0.8
 machine_nozzle_size = 0.8
 machine_nozzle_tip_outer_diameter = 2.0
 multiple_mesh_overlap = 0
-prime_tower_enable = False
+prime_tower_mode = none
 prime_tower_wipe_enabled = True
 raft_surface_layers = 1
 retraction_hop = 2

resources/variants/ultimaker_s3_aa0.8.inst.cfg

@@ -23,7 +23,7 @@ machine_nozzle_id = AA 0.8
 machine_nozzle_size = 0.8
 machine_nozzle_tip_outer_diameter = 2.0
 multiple_mesh_overlap = 0
-prime_tower_enable = False
+prime_tower_mode = none
 prime_tower_wipe_enabled = True
 raft_surface_layers = 1
 retraction_amount = 6.5

resources/variants/ultimaker_s3_bb0.8.inst.cfg

@@ -25,7 +25,7 @@ machine_nozzle_id = BB 0.8
 machine_nozzle_size = 0.8
 machine_nozzle_tip_outer_diameter = 2.0
 multiple_mesh_overlap = 0
-prime_tower_enable = False
+prime_tower_mode = none
 prime_tower_wipe_enabled = True
 raft_surface_layers = 1
 retraction_hop = 2

resources/variants/ultimaker_s5_aa0.8.inst.cfg

@@ -23,7 +23,7 @@ machine_nozzle_id = AA 0.8
 machine_nozzle_size = 0.8
 machine_nozzle_tip_outer_diameter = 2.0
 multiple_mesh_overlap = 0
-prime_tower_enable = False
+prime_tower_mode = none
 prime_tower_wipe_enabled = True
 raft_surface_layers = 1
 retraction_amount = 6.5

resources/variants/ultimaker_s5_bb0.8.inst.cfg

@@ -25,7 +25,7 @@ machine_nozzle_id = BB 0.8
 machine_nozzle_size = 0.8
 machine_nozzle_tip_outer_diameter = 2.0
 multiple_mesh_overlap = 0
-prime_tower_enable = False
+prime_tower_mode = none
 prime_tower_wipe_enabled = True
 raft_surface_layers = 1
 retraction_hop = 2

resources/variants/ultimaker_s7_aa0.8.inst.cfg

@@ -23,7 +23,7 @@ machine_nozzle_id = AA 0.8
 machine_nozzle_size = 0.8
 machine_nozzle_tip_outer_diameter = 2.0
 multiple_mesh_overlap = 0
-prime_tower_enable = False
+prime_tower_mode = none
 prime_tower_wipe_enabled = True
 raft_surface_layers = 1
 retraction_amount = 6.5

resources/variants/ultimaker_s7_bb0.8.inst.cfg

@@ -25,7 +25,7 @@ machine_nozzle_id = BB 0.8
 machine_nozzle_size = 0.8
 machine_nozzle_tip_outer_diameter = 2.0
 multiple_mesh_overlap = 0
-prime_tower_enable = False
+prime_tower_mode = none
 prime_tower_wipe_enabled = True
 raft_surface_layers = 1
 retraction_amount = 4.5