diff --git a/.github/workflows/conan-package-create.yml b/.github/workflows/conan-package-create.yml
index 1c5f101189..855888a059 100644
--- a/.github/workflows/conan-package-create.yml
+++ b/.github/workflows/conan-package-create.yml
@@ -109,9 +109,13 @@ jobs:
                 if:  ${{ runner.os == 'Macos' }}
                 run: brew install autoconf automake ninja
 
+            # NOTE: Due to what are probably github issues, we have to remove the cache and reconfigure before the rest.
+            #       This is maybe because grub caches the disk it uses last time, which is recreated each time.
             -   name: Install Linux system requirements
                 if: ${{ runner.os == 'Linux' }}
                 run: |
+                    sudo rm /var/cache/debconf/config.dat
+                    sudo dpkg --configure -a
                     sudo add-apt-repository ppa:ubuntu-toolchain-r/test -y
                     sudo apt update
                     sudo apt upgrade
diff --git a/.github/workflows/conan-package.yml b/.github/workflows/conan-package.yml
index f88f815139..b0970f60a8 100644
--- a/.github/workflows/conan-package.yml
+++ b/.github/workflows/conan-package.yml
@@ -7,110 +7,149 @@ name: conan-package
 # It should run on pushes against main or CURA-* branches, but it will only create the binaries for main and release branches
 
 on:
-    workflow_dispatch:
-        inputs:
-            create_binaries_windows:
-                required: true
-                default: false
-                description: 'create binaries Windows'
-            create_binaries_linux:
-                required: true
-                default: false
-                description: 'create binaries Linux'
-            create_binaries_macos:
-                required: true
-                default: false
-                description: 'create binaries Macos'
+  workflow_dispatch:
+    inputs:
+      create_binaries_windows:
+        required: true
+        default: false
+        description: 'create binaries Windows'
+      create_binaries_linux:
+        required: true
+        default: false
+        description: 'create binaries Linux'
+      create_binaries_macos:
+        required: true
+        default: false
+        description: 'create binaries Macos'
 
-    push:
-        paths:
-            - 'plugins/**'
-            - 'resources/**'
-            - 'cura/**'
-            - 'icons/**'
-            - 'tests/**'
-            - 'packaging/**'
-            - '.github/workflows/conan-*.yml'
-            - '.github/workflows/notify.yml'
-            - '.github/workflows/requirements-conan-package.txt'
-            - 'requirements*.txt'
-            - 'conanfile.py'
-            - 'conandata.yml'
-            - 'GitVersion.yml'
-            - '*.jinja'
-        branches:
-            - main
-            - 'CURA-*'
-            - '[1-9].[0-9]'
-            - '[1-9].[0-9][0-9]'
-        tags:
-            - '[1-9].[0-9].[0-9]*'
-            - '[1-9].[0-9].[0-9]'
-            - '[1-9].[0-9][0-9].[0-9]*'
+  push:
+    paths:
+      - 'plugins/**'
+      - 'resources/**'
+      - 'cura/**'
+      - 'icons/**'
+      - 'tests/**'
+      - 'packaging/**'
+      - '.github/workflows/conan-*.yml'
+      - '.github/workflows/notify.yml'
+      - '.github/workflows/requirements-conan-package.txt'
+      - 'requirements*.txt'
+      - 'conanfile.py'
+      - 'conandata.yml'
+      - 'GitVersion.yml'
+      - '*.jinja'
+    branches:
+      - main
+      - 'CURA-*'
+      - '[1-9].[0-9]'
+      - '[1-9].[0-9][0-9]'
+    tags:
+      - '[1-9].[0-9].[0-9]*'
+      - '[1-9].[0-9].[0-9]'
+      - '[1-9].[0-9][0-9].[0-9]*'
+
+env:
+    CONAN_LOGIN_USERNAME_CURA: ${{ secrets.CONAN_USER }}
+    CONAN_PASSWORD_CURA: ${{ secrets.CONAN_PASS }}
+    CONAN_LOGIN_USERNAME_CURA_CE: ${{ secrets.CONAN_USER }}
+    CONAN_PASSWORD_CURA_CE: ${{ secrets.CONAN_PASS }}
+    CONAN_LOG_RUN_TO_OUTPUT: 1
+    CONAN_LOGGING_LEVEL: ${{ inputs.conan_logging_level }}
+    CONAN_NON_INTERACTIVE: 1
 
 permissions: {}
 jobs:
-    conan-recipe-version:
-        permissions:
-          contents: read
+  conan-recipe-version:
+    permissions:
+      contents: read
 
-        uses: ultimaker/cura/.github/workflows/conan-recipe-version.yml@main
+    uses: ultimaker/cura/.github/workflows/conan-recipe-version.yml@main
+    with:
+      project_name: cura
+
+  conan-package-create-linux:
+    needs: [ conan-recipe-version ]
+    runs-on: 'ubuntu-latest'
+
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v3
+
+      - name: Setup Python and pip
+        uses: actions/setup-python@v4
         with:
-            project_name: cura
+          python-version: '3.10.x'
+          cache: 'pip'
+          cache-dependency-path: .github/workflows/requirements-conan-package.txt
 
-    conan-package-export:
-        permissions:
-          contents: read
+      - name: Install Python requirements for runner
+        run: pip install -r https://raw.githubusercontent.com/Ultimaker/Cura/main/.github/workflows/requirements-conan-package.txt
+        #  Note the runner requirements are always installed from the main branch in the Ultimaker/Cura repo
 
-        needs: [ conan-recipe-version ]
-        uses: ultimaker/cura/.github/workflows/conan-recipe-export.yml@main
+      - name: Use Conan download cache (Bash)
+        if: ${{ runner.os != 'Windows' }}
+        run: conan config set storage.download_cache="$HOME/.conan/conan_download_cache"
+
+      - name: Cache Conan local repository packages (Bash)
+        uses: actions/cache@v3
         with:
-            recipe_id_full: ${{ needs.conan-recipe-version.outputs.recipe_id_full }}
-            recipe_id_latest: ${{ needs.conan-recipe-version.outputs.recipe_id_latest }}
-            runs_on: 'ubuntu-20.04'
-            python_version: '3.10.x'
-            conan_logging_level: 'info'
-        secrets: inherit
+          path: |
+            $HOME/.conan/data
+            $HOME/.conan/conan_download_cache
+          key: conan-ubuntu-${{ runner.arch }}-create-cache
 
-    conan-package-create-linux:
-        permissions:
-          contents: read
+      # NOTE: Due to what are probably github issues, we have to remove the cache and reconfigure before the rest.
+      #       This is maybe because grub caches the disk it uses last time, which is recreated each time.
+      - name: Install Linux system requirements
+        if: ${{ runner.os == 'Linux' }}
+        run: |
+          sudo rm /var/cache/debconf/config.dat
+          sudo dpkg --configure -a
+          sudo add-apt-repository ppa:ubuntu-toolchain-r/test -y
+          sudo apt update
+          sudo apt upgrade
+          sudo apt install efibootmgr build-essential checkinstall libegl-dev zlib1g-dev libssl-dev ninja-build autoconf libx11-dev libx11-xcb-dev libfontenc-dev libice-dev libsm-dev libxau-dev libxaw7-dev libxcomposite-dev libxcursor-dev libxdamage-dev libxdmcp-dev libxext-dev libxfixes-dev libxi-dev libxinerama-dev libxkbfile-dev libxmu-dev libxmuu-dev libxpm-dev libxrandr-dev libxrender-dev libxres-dev libxss-dev libxt-dev libxtst-dev libxv-dev libxvmc-dev libxxf86vm-dev xtrans-dev libxcb-render0-dev libxcb-render-util0-dev libxcb-xkb-dev libxcb-icccm4-dev libxcb-image0-dev libxcb-keysyms1-dev libxcb-randr0-dev libxcb-shape0-dev libxcb-sync-dev libxcb-xfixes0-dev libxcb-xinerama0-dev xkb-data libxcb-dri3-dev uuid-dev libxcb-util-dev libxkbcommon-x11-dev pkg-config flex bison -y
 
-        if: ${{ (github.event_name == 'push' && (github.ref_name == 'main' || github.ref_name == 'master' || needs.conan-recipe-version.outputs.is_release_branch == 'true')) || (github.event_name == 'workflow_dispatch' && inputs.create_binaries_linux) }}
-        needs: [ conan-recipe-version, conan-package-export ]
+      - name: Install GCC-12
+        run: |
+          sudo apt install g++-12 gcc-12 -y
+          sudo update-alternatives --install /usr/bin/gcc gcc /usr/bin/gcc-12 12
+          sudo update-alternatives --install /usr/bin/g++ g++ /usr/bin/g++-12 12
 
-        uses: ultimaker/cura/.github/workflows/conan-package-create.yml@main
-        with:
-            project_name: ${{ needs.conan-recipe-version.outputs.project_name }}
-            recipe_id_full: ${{ needs.conan-recipe-version.outputs.recipe_id_full }}
-            build_id: 1
-            runs_on: 'ubuntu-20.04'
-            python_version: '3.10.x'
-            conan_logging_level: 'info'
-        secrets: inherit
+      - name: Create the default Conan profile
+        run: conan profile new default --detect
 
-    notify-export:
-        if: ${{ always() }}
-        needs: [ conan-recipe-version, conan-package-export ]
+      - name: Get Conan configuration
+        run: conan config install https://github.com/Ultimaker/conan-config.git
 
-        uses: ultimaker/cura/.github/workflows/notify.yml@main
-        with:
-            success: ${{ contains(join(needs.*.result, ','), 'success') }}
-            success_title: "New Conan recipe exported in ${{ github.repository }}"
-            success_body: "Exported ${{ needs.conan-recipe-version.outputs.recipe_id_full }}"
-            failure_title: "Failed to export Conan Export in ${{ github.repository }}"
-            failure_body: "Failed to exported ${{ needs.conan-recipe-version.outputs.recipe_id_full }}"
-        secrets: inherit
+      - name: Create the Packages using lockfile
+        run: conan create . ${{ needs.conan-recipe-version.outputs.recipe_id_full }} --build=missing --update -o ${{ needs.conan-recipe-version.outputs.project_name }}:devtools=True
 
-    notify-create:
-        if: ${{ always() && ((github.event_name == 'push' && (github.ref_name == 'main' || github.ref_name == 'master' || needs.conan-recipe-version.outputs.is_release_branch == 'true')) || (github.event_name == 'workflow_dispatch' && inputs.create_binaries_linux)) }}
-        needs: [ conan-recipe-version, conan-package-create-linux ]
+      - name: Remove the latest alias
+        if: ${{ needs.conan-recipe-version.outputs.recipe_id_latest != '' }}
+        run: |
+          conan remove ${{ needs.conan-recipe-version.outputs.recipe_id_latest }} -r cura -f || true
+          conan remove ${{ needs.conan-recipe-version.outputs.recipe_id_latest }} -r cura-ce -f || true
 
-        uses: ultimaker/cura/.github/workflows/notify.yml@main
-        with:
-            success: ${{ contains(join(needs.*.result, ','), 'success') }}
-            success_title: "New binaries created in ${{ github.repository }}"
-            success_body: "Created binaries for ${{ needs.conan-recipe-version.outputs.recipe_id_full }}"
-            failure_title: "Failed to create binaries in ${{ github.repository }}"
-            failure_body: "Failed to created binaries for ${{ needs.conan-recipe-version.outputs.recipe_id_full }}"
-        secrets: inherit
+      - name: Create the latest alias
+        if: ${{ needs.conan-recipe-version.outputs.recipe_id_latest != '' && always() }}
+        run: conan alias ${{ needs.conan-recipe-version.outputs.recipe_id_latest }} ${{ needs.conan-recipe-version.outputs.recipe_id_full }}
+
+      - name: Upload the Package(s)
+        if: always()
+        run: |
+          conan upload "*" -r cura --all -c
+          conan upload "*" -r cura-ce -c
+
+  notify-create:
+    if: ${{ always() && (github.event_name == 'push' && (github.ref_name == 'main' || github.ref_name == 'master' || needs.conan-recipe-version.outputs.is_release_branch == 'true')) }}
+    needs: [ conan-recipe-version, conan-package-create-linux ]
+
+    uses: ultimaker/cura/.github/workflows/notify.yml@main
+    with:
+      success: ${{ contains(join(needs.*.result, ','), 'success') }}
+      success_title: "New binaries created in ${{ github.repository }}"
+      success_body: "Created binaries for ${{ needs.conan-recipe-version.outputs.recipe_id_full }}"
+      failure_title: "Failed to create binaries in ${{ github.repository }}"
+      failure_body: "Failed to created binaries for ${{ needs.conan-recipe-version.outputs.recipe_id_full }}"
+    secrets: inherit
diff --git a/.github/workflows/cura-installer.yml b/.github/workflows/cura-installer.yml
index c067de19c0..00ca6ce776 100644
--- a/.github/workflows/cura-installer.yml
+++ b/.github/workflows/cura-installer.yml
@@ -122,9 +122,17 @@ jobs:
                 if:  ${{ runner.os == 'Macos' }}
                 run: brew install autoconf automake ninja create-dmg # Delete create-dmg when deprecating dmg
 
+            -   name: Hack needed specifically for ubuntu-22.04 from mid-Feb 2023 onwards
+                if: ${{ runner.os == 'Linux' && startsWith(inputs.platform, 'ubuntu-22.04') }}
+                run: sudo apt remove libodbc2 libodbcinst2 unixodbc-common -y
+
+            # NOTE: Due to what are probably github issues, we have to remove the cache and reconfigure before the rest.
+            #       This is maybe because grub caches the disk it uses last time, which is recreated each time.
             -   name: Install Linux system requirements
                 if: ${{ runner.os == 'Linux' }}
                 run: |
+                    sudo rm /var/cache/debconf/config.dat
+                    sudo dpkg --configure -a
                     sudo add-apt-repository ppa:ubuntu-toolchain-r/test -y
                     sudo apt update
                     sudo apt upgrade
diff --git a/.github/workflows/unit-test.yml b/.github/workflows/unit-test.yml
index bc1933e3c7..13f81a1491 100644
--- a/.github/workflows/unit-test.yml
+++ b/.github/workflows/unit-test.yml
@@ -105,9 +105,13 @@ jobs:
                         $HOME/.conan/conan_download_cache
                     key: conan-${{ runner.os }}-${{ runner.arch }}-unit-cache
 
+            # NOTE: Due to what are probably github issues, we have to remove the cache and reconfigure before the rest.
+            #       This is maybe because grub caches the disk it uses last time, which is recreated each time.
             -   name: Install Linux system requirements
                 if: ${{ runner.os == 'Linux' }}
                 run: |
+                    sudo rm /var/cache/debconf/config.dat
+                    sudo dpkg --configure -a
                     sudo apt update
                     sudo apt upgrade
                     sudo apt install build-essential checkinstall libegl-dev zlib1g-dev libssl-dev ninja-build autoconf libx11-dev libx11-xcb-dev libfontenc-dev libice-dev libsm-dev libxau-dev libxaw7-dev libxcomposite-dev libxcursor-dev libxdamage-dev libxdmcp-dev libxext-dev libxfixes-dev libxi-dev libxinerama-dev libxkbfile-dev libxmu-dev libxmuu-dev libxpm-dev libxrandr-dev libxrender-dev libxres-dev libxss-dev libxt-dev libxtst-dev libxv-dev libxvmc-dev libxxf86vm-dev xtrans-dev libxcb-render0-dev libxcb-render-util0-dev libxcb-xkb-dev libxcb-icccm4-dev libxcb-image0-dev libxcb-keysyms1-dev libxcb-randr0-dev libxcb-shape0-dev libxcb-sync-dev libxcb-xfixes0-dev libxcb-xinerama0-dev xkb-data libxcb-dri3-dev uuid-dev libxcb-util-dev libxkbcommon-x11-dev pkg-config -y
diff --git a/conandata.yml b/conandata.yml
index 29d67eea83..1f90437ab2 100644
--- a/conandata.yml
+++ b/conandata.yml
@@ -1,107 +1,90 @@
----
-# Usage: defaults to the first entry in this conandata.yml file
-# If you're on a release branch create an entry for that **version**  e.q.: `5.1.0` update the requirements (use pinned versions, not latest)
-# also create a beta entry for that **version**  e.q.: `5.1.0-beta`, update the requirements (use the <dep_name>/(latest)@ultimaker/stable)
-#
-# If you're working on a feature/bugfix branch from a release branch, create an entry for that **channel**,  update the requirements (use
-# the <dep_name>/(latest)@ultimaker/stable)
-#
-# If you're working on a feature/bugfix branch from a main branch, it is optional to create an entry for that **channel**,  update the
-# requirements (use the <dep_name>/(latest)@ultimaker/testing)
-#
-# Subject to change in the future!
-runinfo:
-  entrypoint: "cura_app.py"
 pyinstaller:
-  datas:
-    cura_plugins:
-      package: "cura"
-      src: "plugins"
-      dst: "share/cura/plugins"
-    cura_resources:
-      package: "cura"
-      src: "resources"
-      dst: "share/cura/resources"
-    cura_private_data:
-      package: "cura_private_data"
-      src: "resources"
-      dst: "share/cura/resources"
-      internal: true
-    cura_private_data_plugins:
-      package: "cura_private_data"
-      src: "plugins"
-      dst: "share/cura/plugins"
-      internal: true
-    uranium_plugins:
-      package: "uranium"
-      src: "plugins"
-      dst: "share/uranium/plugins"
-    uranium_resources:
-      package: "uranium"
-      src: "resources"
-      dst: "share/uranium/resources"
-    uranium_um_qt_qml_um:
-      package: "uranium"
-      src: "site-packages/UM/Qt/qml/UM"
-      dst: "PyQt6/Qt6/qml/UM"
-    cura_binary_data:
-      package: "cura_binary_data"
-      src: "resources/cura/resources"
-      dst: "share/cura/resources"
-    uranium_binary_data:
-      package: "cura_binary_data"
-      src: "resources/uranium/resources"
-      dst: "share/uranium/resources"
-    windows_binary_data:
-      package: "cura_binary_data"
-      src: "windows"
-      dst: "share/windows"
-    fdm_materials:
-      package: "fdm_materials"
-      src: "materials"
-      dst: "share/cura/resources/materials"
-    tcl:
-      package: "tcl"
-      src: "lib/tcl8.6"
-      dst: "tcl"
-    tk:
-      package: "tk"
-      src: "lib/tk8.6"
-      dst: "tk"
-  binaries:
-    curaengine:
-      package: "curaengine"
-      src: "bin"
-      dst: "."
-      binary: "CuraEngine"
-  hiddenimports:
-    - "pySavitar"
-    - "pyArcus"
-    - "pynest2d"
-    - "PyQt6"
-    - "PyQt6.QtNetwork"
-    - "PyQt6.sip"
-    - "logging.handlers"
-    - "zeroconf"
-    - "fcntl"
-    - "stl"
-    - "serial"
-  collect_all:
-    - "cura"
-    - "UM"
-    - "serial"
-    - "Charon"
-    - "sqlite3"
-    - "trimesh"
-    - "win32ctypes"
-    - "PyQt6"
-    - "PyQt6.QtNetwork"
-    - "PyQt6.sip"
-    - "stl"
-  icon:
-    Windows: "./icons/Cura.ico"
-    Macos: "./icons/cura.icns"
-    Linux: "./icons/cura-128.png"
+    runinfo:
+        entrypoint: "cura_app.py"
+    datas:
+        cura_plugins:
+            package: "cura"
+            src: "plugins"
+            dst: "share/cura/plugins"
+        cura_resources:
+            package: "cura"
+            src: "resources"
+            dst: "share/cura/resources"
+        cura_private_data:
+            package: "cura_private_data"
+            src: "resources"
+            dst: "share/cura/resources"
+            internal: true
+        uranium_plugins:
+            package: "uranium"
+            src: "plugins"
+            dst: "share/uranium/plugins"
+        uranium_resources:
+            package: "uranium"
+            src: "resources"
+            dst: "share/uranium/resources"
+        uranium_um_qt_qml_um:
+            package: "uranium"
+            src: "site-packages/UM/Qt/qml/UM"
+            dst: "PyQt6/Qt6/qml/UM"
+        cura_binary_data:
+            package: "cura_binary_data"
+            src: "resources/cura/resources"
+            dst: "share/cura/resources"
+        uranium_binary_data:
+            package: "cura_binary_data"
+            src: "resources/uranium/resources"
+            dst: "share/uranium/resources"
+        windows_binary_data:
+            package: "cura_binary_data"
+            src: "windows"
+            dst: "share/windows"
+        fdm_materials:
+            package: "fdm_materials"
+            src: "materials"
+            dst: "share/cura/resources/materials"
+        tcl:
+            package: "tcl"
+            src: "lib/tcl8.6"
+            dst: "tcl"
+        tk:
+            package: "tk"
+            src: "lib/tk8.6"
+            dst: "tk"
+    binaries:
+        curaengine:
+            package: "curaengine"
+            src: "bin"
+            dst: "."
+            binary: "CuraEngine"
+    hiddenimports:
+        - "pySavitar"
+        - "pyArcus"
+        - "pynest2d"
+        - "PyQt6"
+        - "PyQt6.QtNetwork"
+        - "PyQt6.sip"
+        - "logging.handlers"
+        - "zeroconf"
+        - "fcntl"
+        - "stl"
+        - "serial"
+    collect_all:
+        - "cura"
+        - "UM"
+        - "serial"
+        - "Charon"
+        - "sqlite3"
+        - "trimesh"
+        - "win32ctypes"
+        - "PyQt6"
+        - "PyQt6.QtNetwork"
+        - "PyQt6.sip"
+        - "stl"
+    icon:
+        Windows: "./icons/Cura.ico"
+        Macos: "./icons/cura.icns"
+        Linux: "./icons/cura-128.png"
 pycharm_targets:
   - jinja_path: .run_templates/pycharm_cura_run.run.xml.jinja
     module_name: Cura
diff --git a/conanfile.py b/conanfile.py
index 1046e87fc8..3dc89db4b9 100644
--- a/conanfile.py
+++ b/conanfile.py
@@ -6,7 +6,7 @@ from jinja2 import Template
 from conan import ConanFile
 from conan.tools.files import copy, rmdir, save, mkdir
 from conan.tools.microsoft import unix_path
-from conan.tools.env import VirtualRunEnv, Environment
+from conan.tools.env import VirtualRunEnv, Environment, VirtualBuildEnv
 from conan.tools.scm import Version
 from conan.errors import ConanInvalidConfiguration, ConanException
 
@@ -19,7 +19,7 @@ class CuraConan(ConanFile):
     author = "UltiMaker"
     url = "https://github.com/Ultimaker/cura"
     description = "3D printer / slicing GUI built on top of the Uranium framework"
-    topics = ("conan", "python", "pyqt5", "qt", "qml", "3d-printing", "slicer")
+    topics = ("conan", "python", "pyqt6", "qt", "qml", "3d-printing", "slicer")
     build_policy = "missing"
     exports = "LICENSE*", "UltiMaker-Cura.spec.jinja", "CuraVersion.py.jinja"
     settings = "os", "compiler", "build_type", "arch"
@@ -48,12 +48,6 @@ class CuraConan(ConanFile):
         "cura_debug_mode": False,  # Not yet implemented
         "internal": False,
     }
-    scm = {
-        "type": "git",
-        "subfolder": ".",
-        "url": "auto",
-        "revision": "auto"
-    }
 
     @property
     def _pycharm_targets(self):
@@ -161,7 +155,7 @@ class CuraConan(ConanFile):
         return "None"
 
     def _generate_cura_version(self, location):
-        with open(Path(__file__).parent.joinpath("CuraVersion.py.jinja"), "r") as f:
+        with open(os.path.join(self.recipe_folder, "CuraVersion.py.jinja"), "r") as f:
             cura_version_py = Template(f.read())
 
         # If you want a specific Cura version to show up on the splash screen add the user configuration `user.cura:version=VERSION`
@@ -172,7 +166,7 @@ class CuraConan(ConanFile):
         internal_tag = f"+internal" if self.options.internal else ""
         cura_version = f"{cura_version.major}.{cura_version.minor}.{cura_version.patch}{pre_tag}{build_tag}{internal_tag}"
 
-        with open(Path(location, "CuraVersion.py"), "w") as f:
+        with open(os.path.join(location, "CuraVersion.py"), "w") as f:
             f.write(cura_version_py.render(
                 cura_app_name = self.name,
                 cura_app_display_name = self._app_name,
@@ -196,33 +190,33 @@ class CuraConan(ConanFile):
             if "package" in data:  # get the paths from conan package
                 if data["package"] == self.name:
                     if self.in_local_cache:
-                        src_path = Path(self.package_folder, data["src"])
+                        src_path = os.path.join(self.package_folder, data["src"])
                     else:
-                        src_path = Path(self.source_folder, data["src"])
+                        src_path = os.path.join(self.source_folder, data["src"])
                 else:
-                    src_path = Path(self.deps_cpp_info[data["package"]].rootpath, data["src"])
+                    src_path = os.path.join(self.deps_cpp_info[data["package"]].rootpath, data["src"])
             elif "root" in data:  # get the paths relative from the sourcefolder
-                src_path = Path(self.source_folder, data["root"], data["src"])
+                src_path = os.path.join(self.source_folder, data["root"], data["src"])
             else:
                 continue
-            if src_path.exists():
+            if Path(src_path).exists():
                 datas.append((str(src_path), data["dst"]))
 
         binaries = []
         for binary in pyinstaller_metadata["binaries"].values():
             if "package" in binary:  # get the paths from conan package
-                src_path = Path(self.deps_cpp_info[binary["package"]].rootpath, binary["src"])
+                src_path = os.path.join(self.deps_cpp_info[binary["package"]].rootpath, binary["src"])
             elif "root" in binary:  # get the paths relative from the sourcefolder
-                src_path = Path(self.source_folder, binary["root"], binary["src"])
+                src_path = os.path.join(self.source_folder, binary["root"], binary["src"])
             else:
                 continue
-            if not src_path.exists():
+            if not Path(src_path).exists():
                 self.output.warning(f"Source path for binary {binary['binary']} does not exist")
                 continue
 
-            for bin in src_path.glob(binary["binary"] + "*[.exe|.dll|.so|.dylib|.so.]*"):
+            for bin in Path(src_path).glob(binary["binary"] + "*[.exe|.dll|.so|.dylib|.so.]*"):
                 binaries.append((str(bin), binary["dst"]))
-            for bin in src_path.glob(binary["binary"]):
+            for bin in Path(src_path).glob(binary["binary"]):
                 binaries.append((str(bin), binary["dst"]))
 
         # Make sure all Conan dependencies which are shared are added to the binary list for pyinstaller
@@ -240,13 +234,13 @@ class CuraConan(ConanFile):
         # Collect all dll's from PyQt6 and place them in the root
         binaries.extend([(f"{p}", ".") for p in Path(self._site_packages, "PyQt6", "Qt6").glob("**/*.dll")])
 
-        with open(Path(__file__).parent.joinpath("UltiMaker-Cura.spec.jinja"), "r") as f:
+        with open(os.path.join(self.recipe_folder, "UltiMaker-Cura.spec.jinja"), "r") as f:
             pyinstaller = Template(f.read())
 
         version = self.conf_info.get("user.cura:version", default = self.version, check_type = str)
         cura_version = Version(version)
 
-        with open(Path(location, "UltiMaker-Cura.spec"), "w") as f:
+        with open(os.path.join(location, "UltiMaker-Cura.spec"), "w") as f:
             f.write(pyinstaller.render(
                 name = str(self.options.display_name).replace(" ", "-"),
                 display_name = self._app_name,
@@ -267,6 +261,20 @@ class CuraConan(ConanFile):
                 short_version = f"'{cura_version.major}.{cura_version.minor}.{cura_version.patch}'",
             ))
 
+    def export_sources(self):
+        copy(self, "*", os.path.join(self.recipe_folder, "plugins"), os.path.join(self.export_sources_folder, "plugins"))
+        copy(self, "*", os.path.join(self.recipe_folder, "resources"), os.path.join(self.export_sources_folder, "resources"), excludes = "*.mo")
+        copy(self, "*", os.path.join(self.recipe_folder, "tests"), os.path.join(self.export_sources_folder, "tests"))
+        copy(self, "*", os.path.join(self.recipe_folder, "cura"), os.path.join(self.export_sources_folder, "cura"), excludes="CuraVersion.py")
+        copy(self, "*", os.path.join(self.recipe_folder, "packaging"), os.path.join(self.export_sources_folder, "packaging"))
+        copy(self, "*", os.path.join(self.recipe_folder, ".run_templates"), os.path.join(self.export_sources_folder, "run_templates"))
+        copy(self, "requirements.txt", self.recipe_folder, self.export_sources_folder)
+        copy(self, "requirements-dev.txt", self.recipe_folder, self.export_sources_folder)
+        copy(self, "requirements-ultimaker.txt", self.recipe_folder, self.export_sources_folder)
+        copy(self, "UltiMaker-Cura.spec.jinja", self.recipe_folder, self.export_sources_folder)
+        copy(self, "CuraVersion.py.jinja", self.recipe_folder, self.export_sources_folder)
+        copy(self, "cura_app.py", self.recipe_folder, self.export_sources_folder)
+
     def set_version(self):
         if self.version is None:
             self.version = self._umdefault_version()
@@ -303,45 +311,54 @@ class CuraConan(ConanFile):
     def layout(self):
         self.folders.source = "."
         self.folders.build = "venv"
-        self.folders.generators = Path(self.folders.build, "conan")
+        self.folders.generators = os.path.join(self.folders.build, "conan")
 
         self.cpp.package.libdirs = [os.path.join("site-packages", "cura")]
         self.cpp.package.bindirs = ["bin"]
         self.cpp.package.resdirs = ["resources", "plugins", "packaging", "pip_requirements"]  # pip_requirements should be the last item in the list
 
-    def build(self):
-        if self.options.devtools:
-            if self.settings.os != "Windows" or self.conf.get("tools.microsoft.bash:path", check_type = str):
-                # FIXME: once m4, autoconf, automake are Conan V2 ready use self.win_bash and add gettext as base tool_requirement
-                cpp_info = self.dependencies["gettext"].cpp_info
-                for po_file in self.source_path.joinpath("resources", "i18n").glob("**/*.po"):
-                    mo_file = self.build_path.joinpath(po_file.with_suffix('.mo').relative_to(self.source_path))
-                    mkdir(self, str(unix_path(self, mo_file.parent)))
-                    self.run(f"{cpp_info.bindirs[0]}/msgfmt {po_file} -o {mo_file} -f", env="conanbuild", ignore_errors=True)
-
     def generate(self):
+        copy(self, "cura_app.py", self.source_folder, str(self._script_dir))
         cura_run_envvars = self._cura_run_env.vars(self, scope = "run")
         ext = ".ps1" if self.settings.os == "Windows" else ".sh"
-        cura_run_envvars.save_script(self.folders.generators.joinpath(f"cura_run_environment{ext}"))
+        cura_run_envvars.save_script(os.path.join(self.folders.generators, f"cura_run_environment{ext}"))
 
         vr = VirtualRunEnv(self)
         vr.generate()
 
-        self._generate_cura_version(Path(self.source_folder, "cura"))
+        self._generate_cura_version(os.path.join(self.source_folder, "cura"))
 
         if self.options.devtools:
-            entitlements_file = "'{}'".format(Path(self.source_folder, "packaging", "MacOS", "cura.entitlements"))
+            entitlements_file = "'{}'".format(os.path.join(self.source_folder, "packaging", "MacOS", "cura.entitlements"))
             self._generate_pyinstaller_spec(location = self.generators_folder,
-                                            entrypoint_location = "'{}'".format(Path(self.source_folder, self.conan_data["runinfo"]["entrypoint"])).replace("\\", "\\\\"),
-                                            icon_path = "'{}'".format(Path(self.source_folder, "packaging", self.conan_data["pyinstaller"]["icon"][str(self.settings.os)])).replace("\\", "\\\\"),
+                                            entrypoint_location = "'{}'".format(os.path.join(self.source_folder, self.conan_data["pyinstaller"]["runinfo"]["entrypoint"])).replace("\\", "\\\\"),
+                                            icon_path = "'{}'".format(os.path.join(self.source_folder, "packaging", self.conan_data["pyinstaller"]["icon"][str(self.settings.os)])).replace("\\", "\\\\"),
                                             entitlements_file = entitlements_file if self.settings.os == "Macos" else "None")
 
             # Update the po files
+            if self.settings.os != "Windows" or self.conf.get("tools.microsoft.bash:path", check_type=str):
+                vb = VirtualBuildEnv(self)
+                vb.generate()
+
+                # FIXME: once m4, autoconf, automake are Conan V2 ready use self.win_bash and add gettext as base tool_requirement
+                cpp_info = self.dependencies["gettext"].cpp_info
+                for po_file in self.source_path.joinpath("resources", "i18n").glob("**/*.po"):
+                    pot_file = self.source_path.joinpath("resources", "i18n", po_file.with_suffix('.pot').name)
+                    mkdir(self, str(unix_path(self, pot_file.parent)))
+                    self.run(
+                        f"{cpp_info.bindirs[0]}/msgmerge --no-wrap --no-fuzzy-matching -width=140 -o {po_file} {po_file} {pot_file}",
+                        env="conanbuild", ignore_errors=True)
+
+    def build(self):
+        if self.options.devtools:
             if self.settings.os != "Windows" or self.conf.get("tools.microsoft.bash:path", check_type = str):
                 # FIXME: once m4, autoconf, automake are Conan V2 ready use self.win_bash and add gettext as base tool_requirement
-                # Extract all the new strings and update the existing po files
-                extractTool = self.python_requires["translationextractor"].module.ExtractTranslations(self, self.source_path.joinpath("resources", "i18n"), "cura.pot")
-                extractTool.generate()
+                for po_file in self.source_path.joinpath("resources", "i18n").glob("**/*.po"):
+                    mo_file = Path(self.build_folder, po_file.with_suffix('.mo').relative_to(self.source_path))
+                    mo_file = mo_file.parent.joinpath("LC_MESSAGES", mo_file.name)
+                    mkdir(self, str(unix_path(self, Path(mo_file).parent)))
+                    cpp_info = self.dependencies["gettext"].cpp_info
+                    self.run(f"{cpp_info.bindirs[0]}/msgfmt {po_file} -o {mo_file} -f", env="conanbuild", ignore_errors=True)
 
     def imports(self):
         self.copy("CuraEngine.exe", root_package = "curaengine", src = "@bindirs", dst = "", keep_path = False)
@@ -402,7 +419,7 @@ class CuraConan(ConanFile):
         self.copy_deps("*", root_package = "uranium", src = self.deps_cpp_info["uranium"].libdirs[0],
                        dst = self._site_packages.joinpath("UM"),
                        keep_path = True)
-        self.copy_deps("*", root_package = "uranium", src = str(Path(self.deps_cpp_info["uranium"].libdirs[0], "Qt", "qml", "UM")),
+        self.copy_deps("*", root_package = "uranium", src = str(os.path.join(self.deps_cpp_info["uranium"].libdirs[0], "Qt", "qml", "UM")),
                        dst = self._site_packages.joinpath("PyQt6", "Qt6", "qml", "UM"),
                        keep_path = True)
 
@@ -445,24 +462,24 @@ echo "CURA_APP_NAME={{ cura_app_name }}" >> ${{ env_prefix }}GITHUB_ENV
                     env_prefix = env_prefix)
 
         ext = ".sh" if self.settings.os != "Windows" else ".ps1"
-        save(self, self._script_dir.joinpath(f"activate_github_actions_version_env{ext}"), activate_github_actions_version_env)
+        save(self, os.path.join(self._script_dir, f"activate_github_actions_version_env{ext}"), activate_github_actions_version_env)
 
-        self._generate_cura_version(Path(self._site_packages, "cura"))
+        self._generate_cura_version(os.path.join(self._site_packages, "cura"))
 
         entitlements_file = "'{}'".format(Path(self.cpp_info.res_paths[2], "MacOS", "cura.entitlements"))
         self._generate_pyinstaller_spec(location = self._base_dir,
-                                        entrypoint_location = "'{}'".format(Path(self.cpp_info.bin_paths[0], self.conan_data["runinfo"]["entrypoint"])).replace("\\", "\\\\"),
-                                        icon_path = "'{}'".format(Path(self.cpp_info.res_paths[2], self.conan_data["pyinstaller"]["icon"][str(self.settings.os)])).replace("\\", "\\\\"),
+                                        entrypoint_location = "'{}'".format(os.path.join(self.package_folder, self.cpp_info.bindirs[0], self.conan_data["pyinstaller"]["runinfo"]["entrypoint"])).replace("\\", "\\\\"),
+                                        icon_path = "'{}'".format(os.path.join(self.package_folder, self.cpp_info.resdirs[2], self.conan_data["pyinstaller"]["icon"][str(self.settings.os)])).replace("\\", "\\\\"),
                                         entitlements_file = entitlements_file if self.settings.os == "Macos" else "None")
 
     def package(self):
-        copy(self, "cura_app.py", src = self.source_path, dst = self.package_path.joinpath(self.cpp.package.bindirs[0]))
-        copy(self, "*", src = self.source_path.joinpath("cura"), dst = self.package_path.joinpath(self.cpp.package.libdirs[0]))
-        copy(self, "*", src = self.source_path.joinpath("resources"), dst = self.package_path.joinpath(self.cpp.package.resdirs[0]), excludes="*.po")
-        copy(self, "*", src = self.build_path.joinpath("resources"), dst = self.package_path.joinpath(self.cpp.package.resdirs[0]))
-        copy(self, "*", src = self.source_path.joinpath("plugins"), dst = self.package_path.joinpath(self.cpp.package.resdirs[1]))
-        copy(self, "requirement*.txt", src = self.source_path, dst = self.package_path.joinpath(self.cpp.package.resdirs[-1]))
-        copy(self, "*", src = self.source_path.joinpath("packaging"), dst = self.package_path.joinpath(self.cpp.package.resdirs[2]))
+        copy(self, "cura_app.py", src = self.source_folder, dst = os.path.join(self.package_folder, self.cpp.package.bindirs[0]))
+        copy(self, "*", src = os.path.join(self.source_folder, "cura"), dst = os.path.join(self.package_folder, self.cpp.package.libdirs[0]))
+        copy(self, "*", src = os.path.join(self.source_folder, "resources"), dst = os.path.join(self.package_folder, self.cpp.package.resdirs[0]))
+        copy(self, "*.mo", os.path.join(self.build_folder, "resources"), os.path.join(self.package_folder, "resources"))
+        copy(self, "*", src = os.path.join(self.source_folder, "plugins"), dst = os.path.join(self.package_folder, self.cpp.package.resdirs[1]))
+        copy(self, "requirement*.txt", src = self.source_folder, dst = os.path.join(self.package_folder, self.cpp.package.resdirs[-1]))
+        copy(self, "*", src = os.path.join(self.source_folder, "packaging"), dst = os.path.join(self.package_folder, self.cpp.package.resdirs[2]))
 
     def package_info(self):
         self.user_info.pip_requirements = "requirements.txt"
@@ -470,8 +487,8 @@ echo "CURA_APP_NAME={{ cura_app_name }}" >> ${{ env_prefix }}GITHUB_ENV
         self.user_info.pip_requirements_build = "requirements-dev.txt"
 
         if self.in_local_cache:
-            self.runenv_info.append_path("PYTHONPATH", str(Path(self.cpp_info.lib_paths[0]).parent))
-            self.runenv_info.append_path("PYTHONPATH", self.cpp_info.res_paths[1])  # Add plugins to PYTHONPATH
+            self.runenv_info.append_path("PYTHONPATH", os.path.join(self.package_folder, "site-packages"))
+            self.runenv_info.append_path("PYTHONPATH", os.path.join(self.package_folder, "plugins"))
         else:
             self.runenv_info.append_path("PYTHONPATH", self.source_folder)
             self.runenv_info.append_path("PYTHONPATH", os.path.join(self.source_folder, "plugins"))
diff --git a/plugins/GCodeReader/FlavorParser.py b/plugins/GCodeReader/FlavorParser.py
index 555d9d594e..372ee83135 100644
--- a/plugins/GCodeReader/FlavorParser.py
+++ b/plugins/GCodeReader/FlavorParser.py
@@ -32,6 +32,7 @@ class FlavorParser:
     """This parser is intended to interpret the common firmware codes among all the different flavors"""
 
     MAX_EXTRUDER_COUNT = 16
+    DEFAULT_FILAMENT_DIAMETER = 2.85
 
     def __init__(self) -> None:
         CuraApplication.getInstance().hideMessageSignal.connect(self._onHideMessage)
@@ -48,7 +49,7 @@ class FlavorParser:
         self._is_layers_in_file = False  # Does the Gcode have the layers comment?
         self._extruder_offsets = {}  # type: Dict[int, List[float]] # Offsets for multi extruders. key is index, value is [x-offset, y-offset]
         self._current_layer_thickness = 0.2  # default
-        self._filament_diameter = 2.85       # default
+        self._current_filament_diameter = 2.85       # default
         self._previous_extrusion_value = 0.0  # keep track of the filament retractions
 
         CuraApplication.getInstance().getPreferences().addPreference("gcodereader/show_caution", True)
@@ -152,7 +153,7 @@ class FlavorParser:
 
     def _calculateLineWidth(self, current_point: Position, previous_point: Position, current_extrusion: float, previous_extrusion: float, layer_thickness: float) -> float:
         # Area of the filament
-        Af = (self._filament_diameter / 2) ** 2 * numpy.pi
+        Af = (self._current_filament_diameter / 2) ** 2 * numpy.pi
         # Length of the extruded filament
         de = current_extrusion - previous_extrusion
         # Volume of the extruded filament
@@ -287,7 +288,11 @@ class FlavorParser:
 
     def processTCode(self, global_stack, T: int, line: str, position: Position, path: List[List[Union[float, int]]]) -> Position:
         self._extruder_number = T
-        self._filament_diameter = global_stack.extruderList[self._extruder_number].getProperty("material_diameter", "value")
+        try:
+            self._current_filament_diameter = global_stack.extruderList[self._extruder_number].getProperty("material_diameter", "value")
+        except IndexError:
+            self._current_filament_diameter = self.DEFAULT_FILAMENT_DIAMETER
+
         if self._extruder_number + 1 > len(position.e):
             self._extrusion_length_offset.extend([0] * (self._extruder_number - len(position.e) + 1))
             position.e.extend([0] * (self._extruder_number - len(position.e) + 1))
@@ -323,7 +328,11 @@ class FlavorParser:
         if not global_stack:
             return None
 
-        self._filament_diameter = global_stack.extruderList[self._extruder_number].getProperty("material_diameter", "value")
+        try:
+            self._current_filament_diameter = global_stack.extruderList[self._extruder_number].getProperty("material_diameter", "value")
+        except IndexError:
+            # There can be a mismatch between the number of extruders in the G-Code file and the number of extruders in the current machine.
+            self._current_filament_diameter = self.DEFAULT_FILAMENT_DIAMETER
 
         scene_node = CuraSceneNode()
 
diff --git a/resources/definitions/Geeetech_Base_Dual_Extruder.def.json b/resources/definitions/Geeetech_Base_Dual_Extruder.def.json
index 92dc13d7a9..7bc2bc529c 100644
--- a/resources/definitions/Geeetech_Base_Dual_Extruder.def.json
+++ b/resources/definitions/Geeetech_Base_Dual_Extruder.def.json
@@ -133,7 +133,6 @@
         "support_interface_pattern": { "value": "zigzag" },
         "support_interface_skip_height": { "value": 0.2 },
         "support_pattern": { "value": "'zigzag'" },
-        "support_use_towers": { "value": false },
         "support_wall_count": { "value": 0 },
         "support_xy_distance": { "value": "wall_line_width_0 * 2" },
         "support_xy_distance_overhang": { "value": "wall_line_width_0" },
diff --git a/resources/definitions/Geeetech_Base_Multi_Extruder.def.json b/resources/definitions/Geeetech_Base_Multi_Extruder.def.json
index bb26709719..4d4bc3363a 100644
--- a/resources/definitions/Geeetech_Base_Multi_Extruder.def.json
+++ b/resources/definitions/Geeetech_Base_Multi_Extruder.def.json
@@ -134,7 +134,6 @@
         "support_interface_pattern": { "value": "zigzag" },
         "support_interface_skip_height": { "value": 0.2 },
         "support_pattern": { "value": "'zigzag'" },
-        "support_use_towers": { "value": false },
         "support_wall_count": { "value": 0 },
         "support_xy_distance": { "value": "wall_line_width_0 * 2" },
         "support_xy_distance_overhang": { "value": "wall_line_width_0" },
diff --git a/resources/definitions/Geeetech_Base_Single_Extruder.def.json b/resources/definitions/Geeetech_Base_Single_Extruder.def.json
index 5a168c0b69..b155a0ee6c 100644
--- a/resources/definitions/Geeetech_Base_Single_Extruder.def.json
+++ b/resources/definitions/Geeetech_Base_Single_Extruder.def.json
@@ -121,7 +121,6 @@
         "support_interface_pattern": { "value": "zigzag" },
         "support_interface_skip_height": { "value": 0.2 },
         "support_pattern": { "value": "'zigzag'" },
-        "support_use_towers": { "value": false },
         "support_wall_count": { "value": 0 },
         "support_xy_distance": { "value": "wall_line_width_0 * 2" },
         "support_xy_distance_overhang": { "value": "wall_line_width_0" },
diff --git a/resources/definitions/anycubic_i3_mega_s.def.json b/resources/definitions/anycubic_i3_mega_s.def.json
index d8e10f97e5..60b5bf652c 100644
--- a/resources/definitions/anycubic_i3_mega_s.def.json
+++ b/resources/definitions/anycubic_i3_mega_s.def.json
@@ -115,7 +115,6 @@
         "support_structure": { "value": "'tree'" },
         "support_top_distance": { "value": "extruderValue(support_roof_extruder_nr if support_roof_enable else support_infill_extruder_nr, 'support_z_distance') + (layer_height if support_structure == 'tree' else 0)" },
         "support_type": { "value": "'buildplate' if support_structure == 'tree' else 'everywhere'" },
-        "support_use_towers": { "value": false },
         "support_wall_count": { "value": 1 },
         "support_xy_distance": { "value": "wall_line_width_0 * 2" },
         "support_xy_distance_overhang": { "value": "wall_line_width_0" },
diff --git a/resources/definitions/artillery_base.def.json b/resources/definitions/artillery_base.def.json
index 31169c5dd4..e8b779bf00 100644
--- a/resources/definitions/artillery_base.def.json
+++ b/resources/definitions/artillery_base.def.json
@@ -156,7 +156,6 @@
         "support_interface_height": { "value": "layer_height * 4" },
         "support_interface_pattern": { "value": "'grid'" },
         "support_interface_skip_height": { "value": 0.2 },
-        "support_use_towers": { "value": false },
         "support_xy_distance": { "value": "wall_line_width_0 * 2" },
         "support_xy_distance_overhang": { "value": "wall_line_width_0" },
         "support_xy_overrides_z": { "value": "'xy_overrides_z'" },
diff --git a/resources/definitions/atmat_signal_pro_base.def.json b/resources/definitions/atmat_signal_pro_base.def.json
index 7b622a558a..3c581ff654 100644
--- a/resources/definitions/atmat_signal_pro_base.def.json
+++ b/resources/definitions/atmat_signal_pro_base.def.json
@@ -221,7 +221,6 @@
         "support_offset": { "value": "1.5" },
         "support_pattern": { "default_value": "zigzag" },
         "support_top_distance": { "value": "support_z_distance" },
-        "support_use_towers": { "value": "True" },
         "support_xy_distance": { "value": "wall_line_width_0 * 2.5" },
         "support_xy_distance_overhang": { "value": "wall_line_width_0" },
         "support_z_distance": { "value": "layer_height" },
diff --git a/resources/definitions/biqu_base.def.json b/resources/definitions/biqu_base.def.json
index 86da2b1e13..5b84c72b88 100755
--- a/resources/definitions/biqu_base.def.json
+++ b/resources/definitions/biqu_base.def.json
@@ -110,7 +110,6 @@
         "support_interface_pattern": { "value": "'grid'" },
         "support_interface_skip_height": { "value": 0.2 },
         "support_pattern": { "value": "'zigzag'" },
-        "support_use_towers": { "value": false },
         "support_wall_count": { "value": 1 },
         "support_xy_distance": { "value": "wall_line_width_0 * 2" },
         "support_xy_distance_overhang": { "value": "wall_line_width_0" },
diff --git a/resources/definitions/blocks_base.def.json b/resources/definitions/blocks_base.def.json
index de69a3f799..b8e215ab5f 100644
--- a/resources/definitions/blocks_base.def.json
+++ b/resources/definitions/blocks_base.def.json
@@ -99,7 +99,6 @@
         "support_interface_pattern": { "value": "'grid'" },
         "support_interface_skip_height": { "value": 0.2 },
         "support_pattern": { "value": "'zigzag'" },
-        "support_use_towers": { "value": false },
         "support_xy_distance": { "value": "wall_line_width_0 * 2" },
         "support_xy_distance_overhang": { "value": "wall_line_width_0" },
         "support_xy_overrides_z": { "value": "'xy_overrides_z'" },
diff --git a/resources/definitions/creality_base.def.json b/resources/definitions/creality_base.def.json
index be6792eafd..229c46d7ca 100644
--- a/resources/definitions/creality_base.def.json
+++ b/resources/definitions/creality_base.def.json
@@ -160,7 +160,6 @@
         "support_interface_skip_height": { "value": 0.2 },
         "support_pattern": { "value": "'zigzag'" },
         "support_top_distance": { "value": "extruderValue(support_roof_extruder_nr if support_roof_enable else support_infill_extruder_nr, 'support_z_distance') + (layer_height if support_structure == 'tree' else 0)" },
-        "support_use_towers": { "value": false },
         "support_wall_count": { "value": 1 },
         "support_xy_distance": { "value": "wall_line_width_0 * 2" },
         "support_xy_distance_overhang": { "value": "wall_line_width_0" },
diff --git a/resources/definitions/deltacomb_base.def.json b/resources/definitions/deltacomb_base.def.json
index 9d48683c0d..a4634bfcf1 100644
--- a/resources/definitions/deltacomb_base.def.json
+++ b/resources/definitions/deltacomb_base.def.json
@@ -78,7 +78,6 @@
         "speed_z_hop": { "value": "speed_travel" },
         "support_bottom_distance": { "value": "layer_height" },
         "support_bottom_enable": { "value": false },
-        "support_use_towers": { "default_value": false },
         "support_wall_count": { "value": "1" },
         "support_z_distance": { "value": "layer_height" },
         "switch_extruder_retraction_amount": { "value": 10 },
diff --git a/resources/definitions/elegoo_base.def.json b/resources/definitions/elegoo_base.def.json
index ed0c6d1c9d..2e47f345d6 100644
--- a/resources/definitions/elegoo_base.def.json
+++ b/resources/definitions/elegoo_base.def.json
@@ -123,11 +123,9 @@
         "support_interface_density": { "default_value": 33.333 },
         "support_interface_pattern": { "default_value": "lines" },
         "support_material_flow": { "value": "material_flow * 0.95" },
-        "support_offset": { "default_value": 0.3 },
         "support_roof_pattern": { "value": "'grid'" },
         "support_top_distance": { "value": "extruderValue(support_roof_extruder_nr if support_roof_enable else support_infill_extruder_nr, 'layer_height') + (0 if support_structure == 'tree' else 0)" },
         "support_tower_maximum_supported_diameter": { "value": "1" },
-        "support_use_towers": { "default_value": false },
         "support_xy_distance": { "value": "machine_nozzle_size * 1.7" },
         "support_xy_distance_overhang": { "value": "machine_nozzle_size * 1.2 if support_interface_enable else machine_nozzle_size * 0.8" },
         "support_z_distance": { "value": "layer_height * 1.2 if (support_interface_enable and support_bottom_enable and layer_height < 0.16) or support_bottom_enable else layer_height" },
diff --git a/resources/definitions/eryone_er20.def.json b/resources/definitions/eryone_er20.def.json
index 3d071bbdc5..e05f195bfb 100644
--- a/resources/definitions/eryone_er20.def.json
+++ b/resources/definitions/eryone_er20.def.json
@@ -95,7 +95,6 @@
         "support_pattern": { "value": "'triangles'" },
         "support_roof_enable": { "value": true },
         "support_type": { "value": "'everywhere'" },
-        "support_use_towers": { "value": false },
         "support_xy_distance": { "value": 0.7 },
         "support_xy_distance_overhang": { "value": 0.2 },
         "support_z_distance": { "value": 0.3 },
diff --git a/resources/definitions/eryone_thinker.def.json b/resources/definitions/eryone_thinker.def.json
index 555e0d548f..cacde272be 100644
--- a/resources/definitions/eryone_thinker.def.json
+++ b/resources/definitions/eryone_thinker.def.json
@@ -115,7 +115,6 @@
         "support_interface_enable": { "value": true },
         "support_pattern": { "value": "'triangles'" },
         "support_roof_enable": { "value": true },
-        "support_use_towers": { "value": false },
         "support_z_distance": { "value": 0.3 },
         "top_layers": { "value": 6 },
         "top_thickness": { "value": "layer_height * top_layers" },
diff --git a/resources/definitions/fdmprinter.def.json b/resources/definitions/fdmprinter.def.json
index 9154ce95ae..e7d669bbed 100644
--- a/resources/definitions/fdmprinter.def.json
+++ b/resources/definitions/fdmprinter.def.json
@@ -4419,7 +4419,7 @@
                     "type": "float",
                     "value": "material_print_temperature",
                     "enabled": "cool_min_layer_time > 0",
-                    "minimum_value": "material_final_print_temperature",
+                    "minimum_value": "max(material_final_print_temperature, material_initial_print_temperature)",
                     "maximum_value": "material_print_temperature",
                     "settable_per_mesh": false,
                     "settable_per_extruder": true
@@ -4698,7 +4698,7 @@
                     "maximum_value": "999999",
                     "type": "int",
                     "value": "1 if (support_interface_pattern == 'zigzag') else 0",
-                    "enabled": "support_interface_enable or support_meshes_present",
+                    "enabled": "(support_enable and support_interface_enable) or support_meshes_present",
                     "limit_to_extruder": "support_interface_extruder_nr",
                     "settable_per_mesh": false,
                     "settable_per_extruder": true,
@@ -4715,7 +4715,7 @@
                             "maximum_value": "999999",
                             "type": "int",
                             "value": "support_interface_wall_count",
-                            "enabled": "support_interface_enable or support_meshes_present",
+                            "enabled": "(support_enable and support_interface_enable) or support_meshes_present",
                             "limit_to_extruder": "support_interface_extruder_nr",
                             "settable_per_mesh": false,
                             "settable_per_extruder": true
@@ -4731,7 +4731,7 @@
                             "maximum_value": "999999",
                             "type": "int",
                             "value": "support_interface_wall_count",
-                            "enabled": "support_interface_enable or support_meshes_present",
+                            "enabled": "(support_enable and support_interface_enable) or support_meshes_present",
                             "limit_to_extruder": "support_interface_extruder_nr",
                             "settable_per_mesh": false,
                             "settable_per_extruder": true
@@ -4957,6 +4957,7 @@
                     "unit": "mm",
                     "type": "float",
                     "default_value": 0.3,
+                    "value": "0 if support_bottom_enable else 0.3",
                     "limit_to_extruder": "support_bottom_extruder_nr if support_bottom_enable else support_infill_extruder_nr",
                     "minimum_value": "0",
                     "maximum_value_warning": "1.0",
@@ -4970,10 +4971,10 @@
                     "unit": "mm",
                     "type": "float",
                     "default_value": 5.0,
-                    "limit_to_extruder": "support_interface_extruder_nr if support_interface_enable else support_infill_extruder_nr",
+                    "limit_to_extruder": "support_interface_extruder_nr if support_bottom_enable else support_infill_extruder_nr",
                     "minimum_value": "0",
                     "maximum_value_warning": "10.0",
-                    "enabled": "support_enable or support_meshes_present",
+                    "enabled": "(support_enable or support_meshes_present) and support_bottom_stair_step_height > 0",
                     "settable_per_mesh": true
                 },
                 "support_bottom_stair_step_min_slope":
@@ -4986,7 +4987,7 @@
                     "limit_to_extruder": "support_bottom_extruder_nr if support_bottom_enable else support_infill_extruder_nr",
                     "minimum_value": "0.01",
                     "maximum_value": "89.99",
-                    "enabled": "support_enable or support_meshes_present",
+                    "enabled": "(support_enable or support_meshes_present) and support_bottom_stair_step_height > 0",
                     "settable_per_mesh": true
                 },
                 "support_join_distance":
@@ -5009,7 +5010,8 @@
                     "description": "Amount of offset applied to all support polygons in each layer. Positive values can smooth out the support areas and result in more sturdy support.",
                     "unit": "mm",
                     "type": "float",
-                    "default_value": 0,
+                    "default_value": 0.8,
+                    "value": "support_line_width + 0.4",
                     "limit_to_extruder": "support_infill_extruder_nr",
                     "minimum_value_warning": "-1 * machine_nozzle_size",
                     "maximum_value_warning": "10 * machine_nozzle_size",
@@ -5093,7 +5095,7 @@
                             "default_value": false,
                             "value": "extruderValue(support_roof_extruder_nr, 'support_interface_enable')",
                             "limit_to_extruder": "support_roof_extruder_nr",
-                            "enabled": "support_enable or support_meshes_present",
+                            "enabled": "(support_enable or support_meshes_present) and support_interface_enable",
                             "settable_per_mesh": true
                         },
                         "support_bottom_enable":
@@ -5104,7 +5106,7 @@
                             "default_value": false,
                             "value": "extruderValue(support_bottom_extruder_nr, 'support_interface_enable')",
                             "limit_to_extruder": "support_bottom_extruder_nr",
-                            "enabled": "support_enable or support_meshes_present",
+                            "enabled": "(support_enable or support_meshes_present) and support_interface_enable",
                             "settable_per_mesh": true
                         }
                     }
@@ -5162,7 +5164,8 @@
                     "description": "When checking where there's model above and below the support, take steps of the given height. Lower values will slice slower, while higher values may cause normal support to be printed in some places where there should have been support interface.",
                     "unit": "mm",
                     "type": "float",
-                    "default_value": 0.3,
+                    "default_value": 0.2,
+                    "value": "layer_height",
                     "minimum_value": "0",
                     "maximum_value_warning": "support_interface_height",
                     "limit_to_extruder": "support_interface_extruder_nr",
diff --git a/resources/definitions/flyingbear_base.def.json b/resources/definitions/flyingbear_base.def.json
index b59c6abf90..dcbeca1e9e 100644
--- a/resources/definitions/flyingbear_base.def.json
+++ b/resources/definitions/flyingbear_base.def.json
@@ -166,7 +166,6 @@
         "support_interface_pattern": { "value": "'grid'" },
         "support_interface_skip_height": { "value": 0.2 },
         "support_pattern": { "value": "'zigzag'" },
-        "support_use_towers": { "value": false },
         "support_wall_count": { "value": 1 },
         "support_xy_distance": { "value": "wall_line_width_0 * 2" },
         "support_xy_distance_overhang": { "value": "wall_line_width_0" },
diff --git a/resources/definitions/fusion3_f410.def.json b/resources/definitions/fusion3_f410.def.json
index 091a8f7ac5..1c4fce0d44 100644
--- a/resources/definitions/fusion3_f410.def.json
+++ b/resources/definitions/fusion3_f410.def.json
@@ -114,7 +114,6 @@
         "support_interface_pattern": { "value": "'grid'" },
         "support_interface_skip_height": { "value": 0.2 },
         "support_pattern": { "value": "'zigzag'" },
-        "support_use_towers": { "value": false },
         "support_wall_count": { "value": 0 },
         "support_xy_distance": { "value": "wall_line_width_0 * 3" },
         "support_xy_distance_overhang": { "value": "wall_line_width_0" },
diff --git a/resources/definitions/inat_base.def.json b/resources/definitions/inat_base.def.json
index 1bf4ce3917..554b188b82 100644
--- a/resources/definitions/inat_base.def.json
+++ b/resources/definitions/inat_base.def.json
@@ -316,7 +316,6 @@
         "support_join_distance": { "value": 5.0 },
         "support_offset": { "value": 3.0 },
         "support_tree_angle": { "value": 60 },
-        "support_use_towers": { "value": false },
         "support_wall_count": { "value": "1 if (support_structure == 'tree') else 0" },
         "support_z_distance": { "value": "layer_height if (2*layer_height > 0.8*machine_nozzle_size) else (2*layer_height)" },
         "top_bottom_pattern": { "value": "'zigzag'" },
diff --git a/resources/definitions/kingroon_base.def.json b/resources/definitions/kingroon_base.def.json
index c06df233c2..5f23b602b9 100644
--- a/resources/definitions/kingroon_base.def.json
+++ b/resources/definitions/kingroon_base.def.json
@@ -226,7 +226,6 @@
         "support_interface_pattern": { "value": "'grid'" },
         "support_interface_skip_height": { "value": 0.2 },
         "support_pattern": { "value": "'zigzag'" },
-        "support_use_towers": { "value": false },
         "support_wall_count": { "value": 1 },
         "support_xy_distance": { "value": "wall_line_width_0 * 2" },
         "support_xy_distance_overhang": { "value": "wall_line_width_0" },
diff --git a/resources/definitions/koonovo_base.def.json b/resources/definitions/koonovo_base.def.json
index 1456bc68e7..906293bd59 100644
--- a/resources/definitions/koonovo_base.def.json
+++ b/resources/definitions/koonovo_base.def.json
@@ -72,7 +72,6 @@
         "support_interface_pattern": { "value": "'grid'" },
         "support_interface_skip_height": { "value": 0.2 },
         "support_pattern": { "value": "'zigzag'" },
-        "support_use_towers": { "value": false },
         "support_wall_count": { "value": 1 },
         "support_xy_distance": { "value": "wall_line_width_0 * 2" },
         "support_xy_distance_overhang": { "value": "wall_line_width_0" },
diff --git a/resources/definitions/koonovo_kn3.def.json b/resources/definitions/koonovo_kn3.def.json
index ec3c26042a..13981334b8 100644
--- a/resources/definitions/koonovo_kn3.def.json
+++ b/resources/definitions/koonovo_kn3.def.json
@@ -90,7 +90,6 @@
         "support_interface_pattern": { "value": "'grid'" },
         "support_interface_skip_height": { "value": 0.2 },
         "support_pattern": { "value": "'zigzag'" },
-        "support_use_towers": { "value": false },
         "support_wall_count": { "value": 1 },
         "support_xy_distance": { "value": "wall_line_width_0 * 2" },
         "support_xy_distance_overhang": { "value": "wall_line_width_0" },
diff --git a/resources/definitions/koonovo_kn5.def.json b/resources/definitions/koonovo_kn5.def.json
index 3d6b17fcbc..29bd0c75de 100644
--- a/resources/definitions/koonovo_kn5.def.json
+++ b/resources/definitions/koonovo_kn5.def.json
@@ -90,7 +90,6 @@
         "support_interface_pattern": { "value": "'grid'" },
         "support_interface_skip_height": { "value": 0.2 },
         "support_pattern": { "value": "'zigzag'" },
-        "support_use_towers": { "value": false },
         "support_wall_count": { "value": 1 },
         "support_xy_distance": { "value": "wall_line_width_0 * 2" },
         "support_xy_distance_overhang": { "value": "wall_line_width_0" },
diff --git a/resources/definitions/liquid.def.json b/resources/definitions/liquid.def.json
index 200c6b9c8e..aefb2ffbf8 100644
--- a/resources/definitions/liquid.def.json
+++ b/resources/definitions/liquid.def.json
@@ -142,7 +142,6 @@
         "speed_wall_x": { "value": "speed_wall" },
         "support_angle": { "value": "45" },
         "support_pattern": { "value": "'triangles'" },
-        "support_use_towers": { "value": "False" },
         "support_xy_distance": { "value": "wall_line_width_0 * 2.5" },
         "support_xy_distance_overhang": { "value": "wall_line_width_0" },
         "support_z_distance": { "value": "0" },
diff --git a/resources/definitions/longer_base.def.json b/resources/definitions/longer_base.def.json
index ac479895b1..4d6ba0beaf 100644
--- a/resources/definitions/longer_base.def.json
+++ b/resources/definitions/longer_base.def.json
@@ -111,7 +111,6 @@
         "support_interface_pattern": { "value": "'grid'" },
         "support_interface_skip_height": { "value": 0.2 },
         "support_pattern": { "value": "'zigzag'" },
-        "support_use_towers": { "value": false },
         "support_wall_count": { "value": 1 },
         "support_xy_distance": { "value": "wall_line_width_0 * 2" },
         "support_xy_distance_overhang": { "value": "wall_line_width_0" },
diff --git a/resources/definitions/lotmaxx_sc60.def.json b/resources/definitions/lotmaxx_sc60.def.json
index 0dd8f3ab6d..25dc7f5ae8 100644
--- a/resources/definitions/lotmaxx_sc60.def.json
+++ b/resources/definitions/lotmaxx_sc60.def.json
@@ -61,7 +61,6 @@
         "speed_wall_x": { "value": 32 },
         "support_infill_rate": { "value": 5 },
         "support_pattern": { "default_value": "lines" },
-        "support_use_towers": { "value": false },
         "switch_extruder_retraction_amount": { "value": 100 },
         "switch_extruder_retraction_speeds": { "value": 60 },
         "wall_overhang_speed_factor": { "value": 50 },
diff --git a/resources/definitions/maker_made_300x.def.json b/resources/definitions/maker_made_300x.def.json
index 23cad44278..e7f3b8614c 100644
--- a/resources/definitions/maker_made_300x.def.json
+++ b/resources/definitions/maker_made_300x.def.json
@@ -124,7 +124,6 @@
         "support_tower_diameter": { "value": 3 },
         "support_tower_roof_angle": { "value": "65" },
         "support_type": { "value": "'everywhere'" },
-        "support_use_towers": { "value": true },
         "support_wall_count": { "value": "1 if (support_structure == 'tree') else 0" },
         "support_xy_distance": { "value": 0.7 },
         "support_xy_distance_overhang": { "value": 0.2 },
diff --git a/resources/definitions/mingda_base.def.json b/resources/definitions/mingda_base.def.json
index d0aa03d48b..c6a294002e 100644
--- a/resources/definitions/mingda_base.def.json
+++ b/resources/definitions/mingda_base.def.json
@@ -162,7 +162,6 @@
         "support_interface_pattern": { "value": "'grid'" },
         "support_interface_skip_height": { "value": 0.2 },
         "support_pattern": { "value": "'zigzag'" },
-        "support_use_towers": { "value": false },
         "support_wall_count": { "value": 1 },
         "support_xy_distance": { "value": "wall_line_width_0 * 2" },
         "support_xy_distance_overhang": { "value": "wall_line_width_0" },
diff --git a/resources/definitions/mixware_hyper_s.def.json b/resources/definitions/mixware_hyper_s.def.json
index 2fbf273a78..16d909c182 100644
--- a/resources/definitions/mixware_hyper_s.def.json
+++ b/resources/definitions/mixware_hyper_s.def.json
@@ -132,10 +132,8 @@
         "support_interface_enable": { "default_value": true },
         "support_interface_height": { "value": "layer_height * 4" },
         "support_interface_pattern": { "default_value": "grid" },
-        "support_interface_skip_height": { "default_value": 0.24 },
         "support_pattern": { "default_value": "zigzag" },
         "support_type": { "default_value": "buildplate" },
-        "support_use_towers": { "default_value": false },
         "support_wall_count": { "value": 1 },
         "support_xy_distance": { "value": "wall_line_width_0 * 2" },
         "support_xy_distance_overhang": { "value": "wall_line_width_0" },
diff --git a/resources/definitions/modix_v3_base.def.json b/resources/definitions/modix_v3_base.def.json
index 52763c2e98..6f0205e59e 100644
--- a/resources/definitions/modix_v3_base.def.json
+++ b/resources/definitions/modix_v3_base.def.json
@@ -75,7 +75,6 @@
         "support_interface_density": { "value": 40 },
         "support_interface_enable": { "value": true },
         "support_interface_height": { "value": "layer_height * 3" },
-        "support_use_towers": { "value": false },
         "support_xy_distance": { "value": "wall_line_width_0 * 2" },
         "support_xy_distance_overhang": { "value": "wall_line_width_0" },
         "support_z_distance": { "value": "layer_height if layer_height >= 0.2 else layer_height * 2" },
diff --git a/resources/definitions/modix_v4_base.def.json b/resources/definitions/modix_v4_base.def.json
index 7f02674355..932293d6df 100644
--- a/resources/definitions/modix_v4_base.def.json
+++ b/resources/definitions/modix_v4_base.def.json
@@ -75,7 +75,6 @@
         "support_interface_density": { "value": 40 },
         "support_interface_enable": { "value": true },
         "support_interface_height": { "value": "layer_height * 3" },
-        "support_use_towers": { "value": false },
         "support_xy_distance": { "value": "wall_line_width_0 * 2" },
         "support_xy_distance_overhang": { "value": "wall_line_width_0" },
         "support_z_distance": { "value": "layer_height if layer_height >= 0.2 else layer_height * 2" },
diff --git a/resources/definitions/skriware_2.def.json b/resources/definitions/skriware_2.def.json
index 2418a4c1b6..ff3d87a154 100644
--- a/resources/definitions/skriware_2.def.json
+++ b/resources/definitions/skriware_2.def.json
@@ -228,7 +228,6 @@
         "support_interface_material_flow": { "value": "99" },
         "support_line_distance": { "value": "0 if support_infill_rate == 0 else (support_line_width * 100) / support_infill_rate * (2 if support_pattern == 'grid' else (3 if support_pattern == 'triangles' else 1))" },
         "support_material_flow": { "value": "98" },
-        "support_offset": { "default_value": 0.2 },
         "support_roof_density": { "value": "70" },
         "support_roof_extruder_nr": { "value": "0" },
         "support_roof_height": { "value": "0.4" },
@@ -238,7 +237,6 @@
         "support_skip_zag_per_mm": { "default_value": 10 },
         "support_top_distance": { "value": "0.2" },
         "support_tree_collision_resolution": { "value": "0.2" },
-        "support_use_towers": { "default_value": false },
         "support_xy_distance": { "default_value": 0.6 },
         "support_xy_distance_overhang": { "value": "0.5" },
         "support_z_distance": { "default_value": 0.2 },
diff --git a/resources/definitions/strateo3d.def.json b/resources/definitions/strateo3d.def.json
index e19dc31337..0592e718cb 100644
--- a/resources/definitions/strateo3d.def.json
+++ b/resources/definitions/strateo3d.def.json
@@ -277,7 +277,6 @@
             "maximum_value_warning": "machine_nozzle_size*1.5",
             "value": "extruderValue(support_roof_extruder_nr if support_roof_enable else support_infill_extruder_nr, 'support_z_distance')"
         },
-        "support_use_towers": { "default_value": true },
         "support_xy_distance": { "value": "line_width * 1.7" },
         "support_xy_distance_overhang": { "value": "wall_line_width_0" },
         "support_z_distance":
diff --git a/resources/definitions/tank_m_base.def.json b/resources/definitions/tank_m_base.def.json
index 487ced6c65..069c6a4755 100644
--- a/resources/definitions/tank_m_base.def.json
+++ b/resources/definitions/tank_m_base.def.json
@@ -72,7 +72,6 @@
         "support_interface_pattern": { "value": "'grid'" },
         "support_interface_skip_height": { "value": 0.2 },
         "support_pattern": { "value": "'zigzag'" },
-        "support_use_towers": { "value": false },
         "support_wall_count": { "value": 1 },
         "support_xy_distance": { "value": "wall_line_width_0 * 2" },
         "support_xy_distance_overhang": { "value": "wall_line_width_0" },
diff --git a/resources/definitions/tronxy_x.def.json b/resources/definitions/tronxy_x.def.json
index d6388c845d..58dea24c90 100644
--- a/resources/definitions/tronxy_x.def.json
+++ b/resources/definitions/tronxy_x.def.json
@@ -113,7 +113,6 @@
         "support_interface_pattern": { "value": "'grid'" },
         "support_interface_skip_height": { "value": 0.2 },
         "support_pattern": { "value": "'zigzag'" },
-        "support_use_towers": { "value": false },
         "support_wall_count": { "value": "1 if (support_structure == 'tree') else 0" },
         "support_xy_distance": { "value": "wall_line_width_0 * 3" },
         "support_xy_distance_overhang": { "value": "wall_line_width_0" },
diff --git a/resources/definitions/two_trees_base.def.json b/resources/definitions/two_trees_base.def.json
index b432d491cd..108d8df11f 100644
--- a/resources/definitions/two_trees_base.def.json
+++ b/resources/definitions/two_trees_base.def.json
@@ -70,7 +70,6 @@
         "support_interface_pattern": { "value": "'grid'" },
         "support_interface_skip_height": { "value": 0.2 },
         "support_pattern": { "value": "'zigzag'" },
-        "support_use_towers": { "value": false },
         "support_wall_count": { "value": "1 if (support_structure == 'tree') else 0" },
         "support_xy_distance": { "value": "wall_line_width_0 * 2" },
         "support_xy_distance_overhang": { "value": "wall_line_width_0" },
diff --git a/resources/definitions/ultimaker.def.json b/resources/definitions/ultimaker.def.json
index a1be0e9dfe..b43a13f9c6 100644
--- a/resources/definitions/ultimaker.def.json
+++ b/resources/definitions/ultimaker.def.json
@@ -41,7 +41,7 @@
         "cool_min_layer_time": { "value": 6 },
         "cool_min_layer_time_fan_speed_max": { "value": "cool_min_layer_time + 5" },
         "cool_min_speed": { "value": "round(speed_wall_0 * 3 / 4) if cool_lift_head else round(speed_wall_0 / 5)" },
-        "cool_min_temperature": { "value": "material_print_temperature - 15" },
+        "cool_min_temperature": { "value": "max([material_final_print_temperature, material_initial_print_temperature, material_print_temperature - 15])" },
         "gradual_support_infill_step_height": { "value": "4 * layer_height" },
         "gradual_support_infill_steps": { "value": "2 if support_interface_enable else 0" },
         "infill_material_flow": { "value": "(1.95-infill_sparse_density / 100 if infill_sparse_density > 95 else 1) * material_flow" },
@@ -81,7 +81,6 @@
         },
         "meshfix_maximum_deviation": { "value": "machine_nozzle_size / 10" },
         "meshfix_maximum_resolution": { "value": "max(speed_wall_0 / 75, 0.5)" },
-        "minimum_support_area": { "value": "2" },
         "raft_base_speed": { "value": "raft_speed" },
         "raft_base_thickness": { "value": "min(machine_nozzle_size * 0.75, 0.3)" },
         "raft_interface_fan_speed": { "value": "(raft_base_fan_speed + raft_surface_fan_speed) / 2" },
@@ -117,12 +116,10 @@
         "support_interface_material_flow": { "value": "skin_material_flow" },
         "support_interface_offset": { "value": "support_offset" },
         "support_interface_pattern": { "value": "'zigzag'" },
-        "support_interface_skip_height": { "value": "layer_height" },
         "support_line_distance": { "minimum_value_warning": "0 if support_structure == 'tree' else support_line_width" },
-        "support_offset": { "value": "0.9 if support_interface_enable else 0" },
+        "support_tower_maximum_supported_diameter": { "value": "support_tower_diameter" },
         "support_tower_roof_angle": { "value": "0 if support_interface_enable else 65" },
         "support_wall_count": { "value": "1 if support_structure == 'tree' else 0" },
-        "support_xy_distance": { "value": "1" },
         "support_xy_distance_overhang": { "value": "0.2" },
         "support_z_distance": { "value": "0" },
         "top_layers": { "value": "math.ceil(round(top_thickness / resolveOrValue('layer_height'), 4))" },
diff --git a/resources/definitions/ultimaker2_plus_connect.def.json b/resources/definitions/ultimaker2_plus_connect.def.json
index fbcbcc6dc8..2a8c675951 100644
--- a/resources/definitions/ultimaker2_plus_connect.def.json
+++ b/resources/definitions/ultimaker2_plus_connect.def.json
@@ -101,11 +101,6 @@
         "machine_width": { "default_value": 223 },
         "material_bed_temperature": { "maximum_value": 110 },
         "material_bed_temperature_layer_0": { "maximum_value": 110 },
-        "material_initial_print_temperature":
-        {
-            "maximum_value": 260,
-            "value": "material_print_temperature"
-        },
         "material_print_temperature": { "maximum_value": 260 },
         "material_print_temperature_layer_0": { "maximum_value": 260 },
         "meshfix_maximum_deviation": { "value": "(layer_height / 3) if magic_spiralize else (layer_height / 4)" },
diff --git a/resources/definitions/vivedino_base.def.json b/resources/definitions/vivedino_base.def.json
index 54e4335a07..5ffd06f3f0 100644
--- a/resources/definitions/vivedino_base.def.json
+++ b/resources/definitions/vivedino_base.def.json
@@ -101,7 +101,6 @@
         "support_interface_pattern": { "value": "'grid'" },
         "support_interface_skip_height": { "value": 0.2 },
         "support_pattern": { "value": "'zigzag'" },
-        "support_use_towers": { "value": false },
         "support_wall_count": { "value": 1 },
         "support_xy_distance": { "value": "wall_line_width_0 * 2" },
         "support_xy_distance_overhang": { "value": "wall_line_width_0" },
diff --git a/resources/definitions/weedo_x40.def.json b/resources/definitions/weedo_x40.def.json
index 9816070c33..043bae3cb0 100644
--- a/resources/definitions/weedo_x40.def.json
+++ b/resources/definitions/weedo_x40.def.json
@@ -262,7 +262,6 @@
         "support_fan_enable": { "value": true },
         "support_pattern": { "value": "'zigzag'" },
         "support_supported_skin_fan_speed": { "value": 100 },
-        "support_use_towers": { "value": true },
         "support_xy_distance": { "value": "wall_line_width_0 * 2" },
         "support_xy_distance_overhang": { "value": "wall_line_width_0" },
         "support_z_distance": { "value": "layer_height if layer_height >= 0.16 else layer_height*2" },
diff --git a/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml b/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml
index ce3f9c4303..87a8d00ec4 100644
--- a/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml
+++ b/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml
@@ -714,7 +714,7 @@ UM.Window
                         {
                             if(!materialsSyncDialog.hasExportedUsb)
                             {
-                                exportUsbDialog.currentFolder = syncModel.getPreferredExportAllPath();
+                                exportUsbDialog.currentFolder = `${syncModel.getPreferredExportAllPath()}/materials.umm`;
                                 exportUsbDialog.open();
                             }
                             else
diff --git a/resources/quality/ultimaker3/um3_aa0.25_PLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.25_PLA_Normal_Quality.inst.cfg
index e594b7f404..a18d54eefa 100644
--- a/resources/quality/ultimaker3/um3_aa0.25_PLA_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.25_PLA_Normal_Quality.inst.cfg
@@ -17,7 +17,6 @@ infill_overlap = =0 if infill_sparse_density > 80 else 10
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
 machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_heat_up_speed = 1.4
-material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
 material_print_temperature = 190
 retraction_hop = 0.2
 skin_overlap = 5
diff --git a/resources/quality/ultimaker3/um3_aa0.25_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.25_PP_Normal_Quality.inst.cfg
index bef2487fc7..90fbc7ac50 100644
--- a/resources/quality/ultimaker3/um3_aa0.25_PP_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.25_PP_Normal_Quality.inst.cfg
@@ -14,12 +14,11 @@ weight = 0
 
 [values]
 brim_width = 10
-cool_min_temperature = =material_print_temperature - 10
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral'
 infill_wipe_dist = 0.1
 machine_min_cool_heat_time_window = 15
 material_final_print_temperature = =material_print_temperature - 10
-material_initial_print_temperature = =material_print_temperature - 5
+material_initial_print_temperature = =material_print_temperature - 10
 material_print_temperature = =default_material_print_temperature - 15
 multiple_mesh_overlap = 0
 prime_tower_enable = False
diff --git a/resources/quality/ultimaker3/um3_aa0.25_TPLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.25_TPLA_Normal_Quality.inst.cfg
index 3a71ddedc6..ede4f6bbdc 100644
--- a/resources/quality/ultimaker3/um3_aa0.25_TPLA_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.25_TPLA_Normal_Quality.inst.cfg
@@ -17,7 +17,6 @@ infill_overlap = =0 if infill_sparse_density > 80 else 10
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
 machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_heat_up_speed = 1.4
-material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
 material_print_temperature = =default_material_print_temperature - 15
 skin_overlap = 5
 speed_print = 30
diff --git a/resources/quality/ultimaker3/um3_aa0.4_ABS_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_ABS_Draft_Print.inst.cfg
index 5367c176e9..07868c8f25 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_ABS_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_ABS_Draft_Print.inst.cfg
@@ -14,7 +14,6 @@ weight = -2
 [values]
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
-material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature + 10
 prime_tower_enable = False
 skin_overlap = 20
diff --git a/resources/quality/ultimaker3/um3_aa0.4_ABS_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_ABS_Fast_Print.inst.cfg
index e0b6c94447..ab0a053f8a 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_ABS_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_ABS_Fast_Print.inst.cfg
@@ -14,7 +14,6 @@ weight = -1
 [values]
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
-material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature + 5
 prime_tower_enable = False
 speed_print = 60
diff --git a/resources/quality/ultimaker3/um3_aa0.4_ABS_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_ABS_High_Quality.inst.cfg
index 30f9bea8e9..c91defcd2f 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_ABS_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_ABS_High_Quality.inst.cfg
@@ -14,7 +14,6 @@ weight = 1
 [values]
 machine_nozzle_cool_down_speed = 0.8
 machine_nozzle_heat_up_speed = 1.5
-material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature - 5
 prime_tower_enable = False
 speed_print = 50
diff --git a/resources/quality/ultimaker3/um3_aa0.4_ABS_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_ABS_Normal_Quality.inst.cfg
index 460fe81670..b1ef992326 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_ABS_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_ABS_Normal_Quality.inst.cfg
@@ -14,7 +14,6 @@ weight = 0
 [values]
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
-material_initial_print_temperature = =material_print_temperature - 5
 prime_tower_enable = False
 speed_print = 55
 speed_topbottom = =math.ceil(speed_print * 30 / 55)
diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Draft_Print.inst.cfg
index e253b1c936..a43bd51e74 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Draft_Print.inst.cfg
@@ -17,7 +17,6 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 infill_wipe_dist = 0
 layer_height = 0.2
 machine_min_cool_heat_time_window = 15
-material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature + 10
 multiple_mesh_overlap = 0
 prime_tower_enable = True
diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Fast_Print.inst.cfg
index 938ec7f4ca..b7b3246e91 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Fast_Print.inst.cfg
@@ -17,7 +17,6 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 infill_wipe_dist = 0
 layer_height = 0.15
 machine_min_cool_heat_time_window = 15
-material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature + 10
 multiple_mesh_overlap = 0
 prime_tower_enable = True
diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPEP_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPEP_High_Quality.inst.cfg
index e318829d79..db89133c67 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_CPEP_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_CPEP_High_Quality.inst.cfg
@@ -19,7 +19,6 @@ layer_height = 0.06
 machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
-material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature + 2
 multiple_mesh_overlap = 0
 prime_tower_enable = True
diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Normal_Quality.inst.cfg
index 6d4cc56b1f..89605efbf8 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Normal_Quality.inst.cfg
@@ -18,7 +18,6 @@ infill_wipe_dist = 0
 machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
-material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature + 5
 multiple_mesh_overlap = 0
 prime_tower_enable = True
diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPE_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPE_Draft_Print.inst.cfg
index f764ceca77..5de80dacf8 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_CPE_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_CPE_Draft_Print.inst.cfg
@@ -12,7 +12,6 @@ variant = AA 0.4
 weight = -2
 
 [values]
-material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature + 10
 skin_overlap = 20
 speed_print = 60
diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPE_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPE_Fast_Print.inst.cfg
index c0ae02490b..85797fbe1a 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_CPE_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_CPE_Fast_Print.inst.cfg
@@ -12,7 +12,6 @@ variant = AA 0.4
 weight = -1
 
 [values]
-material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature + 5
 speed_print = 60
 speed_topbottom = =math.ceil(speed_print * 30 / 60)
diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPE_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPE_High_Quality.inst.cfg
index 63e36d4fe0..33cdae387f 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_CPE_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_CPE_High_Quality.inst.cfg
@@ -14,7 +14,6 @@ weight = 1
 [values]
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
-material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature - 5
 speed_print = 50
 speed_topbottom = =math.ceil(speed_print * 30 / 50)
diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPE_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPE_Normal_Quality.inst.cfg
index c22cb45c49..3c0ba5d7c0 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_CPE_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_CPE_Normal_Quality.inst.cfg
@@ -14,7 +14,6 @@ weight = 0
 [values]
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
-material_initial_print_temperature = =material_print_temperature - 5
 speed_print = 55
 speed_topbottom = =math.ceil(speed_print * 30 / 55)
 speed_wall = =math.ceil(speed_print * 30 / 55)
diff --git a/resources/quality/ultimaker3/um3_aa0.4_Nylon_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_Nylon_Draft_Print.inst.cfg
index 10f96e5ef2..bfb42c7ede 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_Nylon_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_Nylon_Draft_Print.inst.cfg
@@ -13,7 +13,6 @@ weight = -2
 
 [values]
 adhesion_type = brim
-material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature + 10
 ooze_shield_angle = 40
 raft_airgap = 0.25
diff --git a/resources/quality/ultimaker3/um3_aa0.4_Nylon_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_Nylon_Fast_Print.inst.cfg
index 09514b4874..2ffe453a5e 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_Nylon_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_Nylon_Fast_Print.inst.cfg
@@ -13,7 +13,6 @@ weight = -1
 
 [values]
 adhesion_type = brim
-material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature + 5
 ooze_shield_angle = 40
 raft_airgap = 0.25
diff --git a/resources/quality/ultimaker3/um3_aa0.4_Nylon_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_Nylon_High_Quality.inst.cfg
index 324b77674a..c656ccb7e8 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_Nylon_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_Nylon_High_Quality.inst.cfg
@@ -13,7 +13,6 @@ weight = 1
 
 [values]
 adhesion_type = brim
-material_initial_print_temperature = =material_print_temperature - 5
 ooze_shield_angle = 40
 raft_airgap = 0.25
 skin_overlap = 50
diff --git a/resources/quality/ultimaker3/um3_aa0.4_Nylon_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_Nylon_Normal_Quality.inst.cfg
index c100eb1bdb..20994737c3 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_Nylon_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_Nylon_Normal_Quality.inst.cfg
@@ -13,7 +13,6 @@ weight = 0
 
 [values]
 adhesion_type = brim
-material_initial_print_temperature = =material_print_temperature - 5
 ooze_shield_angle = 40
 raft_airgap = 0.25
 skin_overlap = 50
diff --git a/resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg
index a38aedd81e..e167fed4a2 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg
@@ -22,7 +22,6 @@ layer_height = 0.2
 machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
-material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature + 10
 multiple_mesh_overlap = 0
 ooze_shield_angle = 40
diff --git a/resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg
index 22cfe29d90..ff85785279 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg
@@ -21,7 +21,6 @@ layer_height = 0.15
 machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
-material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature + 10
 multiple_mesh_overlap = 0
 ooze_shield_angle = 40
diff --git a/resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg
index 51d422dcf0..3f5bceaad1 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg
@@ -22,7 +22,6 @@ layer_height = 0.06
 machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
-material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature - 10
 multiple_mesh_overlap = 0
 ooze_shield_angle = 40
diff --git a/resources/quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg
index df1c926c81..db92b7049d 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg
@@ -20,7 +20,6 @@ infill_wipe_dist = 0.1
 machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
-material_initial_print_temperature = =material_print_temperature - 5
 multiple_mesh_overlap = 0
 ooze_shield_angle = 40
 prime_tower_enable = True
diff --git a/resources/quality/ultimaker3/um3_aa0.4_PETG_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PETG_Draft_Print.inst.cfg
index 2fbb282db5..ee06e7b2a6 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_PETG_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_PETG_Draft_Print.inst.cfg
@@ -12,7 +12,6 @@ variant = AA 0.4
 weight = -2
 
 [values]
-material_initial_print_temperature = =material_print_temperature
 material_print_temperature = =default_material_print_temperature + 5
 retraction_combing = all
 skin_overlap = 20
diff --git a/resources/quality/ultimaker3/um3_aa0.4_PETG_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PETG_Fast_Print.inst.cfg
index 7b81e890d0..565a0e111e 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_PETG_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_PETG_Fast_Print.inst.cfg
@@ -12,7 +12,6 @@ variant = AA 0.4
 weight = -1
 
 [values]
-material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature
 retraction_combing = all
 speed_infill = =math.ceil(speed_print * 50 / 60)
diff --git a/resources/quality/ultimaker3/um3_aa0.4_PETG_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PETG_Normal_Quality.inst.cfg
index 9ae45bc99c..5ae0e92582 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_PETG_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_PETG_Normal_Quality.inst.cfg
@@ -14,7 +14,6 @@ weight = 0
 [values]
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
-material_initial_print_temperature = =material_print_temperature - 10
 material_print_temperature = =default_material_print_temperature - 5
 retraction_combing = all
 speed_infill = =math.ceil(speed_print * 45 / 55)
diff --git a/resources/quality/ultimaker3/um3_aa0.4_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PP_Draft_Print.inst.cfg
index 20da0cdc4e..efe64cf83e 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_PP_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_PP_Draft_Print.inst.cfg
@@ -13,7 +13,6 @@ weight = -2
 
 [values]
 brim_width = 20
-cool_min_temperature = =material_print_temperature - 10
 infill_overlap = 0
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral'
 infill_wipe_dist = 0.1
@@ -22,7 +21,7 @@ machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
 material_final_print_temperature = =material_print_temperature - 10
-material_initial_print_temperature = =material_print_temperature - 5
+material_initial_print_temperature = =material_print_temperature - 10
 material_print_temperature = =default_material_print_temperature - 5
 multiple_mesh_overlap = 0
 prime_tower_enable = False
diff --git a/resources/quality/ultimaker3/um3_aa0.4_PP_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PP_Fast_Print.inst.cfg
index c906592150..bf77deaa9b 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_PP_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_PP_Fast_Print.inst.cfg
@@ -13,7 +13,6 @@ weight = -1
 
 [values]
 brim_width = 20
-cool_min_temperature = =material_print_temperature - 10
 infill_overlap = 0
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral'
 infill_wipe_dist = 0.1
@@ -21,8 +20,8 @@ layer_height = 0.15
 machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
-material_final_print_temperature = =material_print_temperature - 12
-material_initial_print_temperature = =material_print_temperature - 2
+material_final_print_temperature = =material_print_temperature - 10
+material_initial_print_temperature = =material_print_temperature - 10
 material_print_temperature = =default_material_print_temperature - 13
 multiple_mesh_overlap = 0
 prime_tower_enable = False
diff --git a/resources/quality/ultimaker3/um3_aa0.4_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PP_Normal_Quality.inst.cfg
index 2fd61d6bc5..7d7d299002 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_PP_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_PP_Normal_Quality.inst.cfg
@@ -13,7 +13,6 @@ weight = 0
 
 [values]
 brim_width = 20
-cool_min_temperature = =material_print_temperature - 10
 infill_overlap = 0
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral'
 infill_wipe_dist = 0.1
@@ -21,7 +20,7 @@ machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
 material_final_print_temperature = =material_print_temperature - 10
-material_initial_print_temperature = =material_print_temperature - 5
+material_initial_print_temperature = =material_print_temperature - 10
 material_print_temperature = =default_material_print_temperature - 15
 multiple_mesh_overlap = 0
 prime_tower_enable = False
diff --git a/resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg
index c49c389d89..f9747bd6cc 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg
@@ -13,7 +13,6 @@ weight = -2
 
 [values]
 brim_width = 8.75
-cool_min_temperature = =material_print_temperature - 10
 gradual_infill_step_height = =5 * layer_height
 infill_overlap = 0
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d'
@@ -25,7 +24,7 @@ machine_nozzle_cool_down_speed = 0.5
 machine_nozzle_heat_up_speed = 2.5
 material_final_print_temperature = =material_print_temperature - 10
 material_flow = 106
-material_initial_print_temperature = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature - 10
 material_print_temperature = =default_material_print_temperature + 2
 multiple_mesh_overlap = 0
 prime_tower_wipe_enabled = True
diff --git a/resources/quality/ultimaker3/um3_aa0.4_TPU_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_TPU_Fast_Print.inst.cfg
index c6e9ad5c8b..3d5d93a0bc 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_TPU_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_TPU_Fast_Print.inst.cfg
@@ -13,7 +13,6 @@ weight = -1
 
 [values]
 brim_width = 8.75
-cool_min_temperature = =material_print_temperature - 10
 gradual_infill_step_height = =5 * layer_height
 infill_overlap = 0
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d'
@@ -25,7 +24,7 @@ machine_nozzle_cool_down_speed = 0.5
 machine_nozzle_heat_up_speed = 2.5
 material_final_print_temperature = =material_print_temperature - 10
 material_flow = 106
-material_initial_print_temperature = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature - 10
 material_print_temperature = =default_material_print_temperature + 2
 multiple_mesh_overlap = 0
 prime_tower_wipe_enabled = True
diff --git a/resources/quality/ultimaker3/um3_aa0.4_TPU_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_TPU_Normal_Quality.inst.cfg
index 008d4f9f5a..9aa61e231c 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_TPU_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_TPU_Normal_Quality.inst.cfg
@@ -13,7 +13,6 @@ weight = 0
 
 [values]
 brim_width = 8.75
-cool_min_temperature = =material_print_temperature - 10
 gradual_infill_step_height = =5 * layer_height
 infill_overlap = 0
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d'
@@ -24,7 +23,7 @@ machine_nozzle_cool_down_speed = 0.5
 machine_nozzle_heat_up_speed = 2.5
 material_final_print_temperature = =material_print_temperature - 10
 material_flow = 106
-material_initial_print_temperature = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature - 10
 multiple_mesh_overlap = 0
 prime_tower_wipe_enabled = True
 retraction_count_max = 15
diff --git a/resources/quality/ultimaker3/um3_aa0.8_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PLA_Draft_Print.inst.cfg
index bcaecfef67..cb86b763b4 100644
--- a/resources/quality/ultimaker3/um3_aa0.8_PLA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_PLA_Draft_Print.inst.cfg
@@ -16,7 +16,6 @@ gradual_infill_step_height = =3 * layer_height
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
-material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
 material_print_temperature = =default_material_print_temperature + 10
 prime_tower_enable = True
 speed_print = 45
diff --git a/resources/quality/ultimaker3/um3_aa0.8_PLA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PLA_Superdraft_Print.inst.cfg
index 9a04acf6a1..733074fc29 100644
--- a/resources/quality/ultimaker3/um3_aa0.8_PLA_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_PLA_Superdraft_Print.inst.cfg
@@ -17,7 +17,6 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 layer_height = 0.4
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
-material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
 material_print_temperature = =default_material_print_temperature + 15
 prime_tower_enable = True
 speed_infill = =math.ceil(speed_print * 35 / 45)
diff --git a/resources/quality/ultimaker3/um3_aa0.8_PLA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PLA_Verydraft_Print.inst.cfg
index 570b39c952..5628d15fb0 100644
--- a/resources/quality/ultimaker3/um3_aa0.8_PLA_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_PLA_Verydraft_Print.inst.cfg
@@ -17,7 +17,6 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 layer_height = 0.3
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
-material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
 material_print_temperature = =default_material_print_temperature + 10
 prime_tower_enable = True
 speed_print = 45
diff --git a/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg
index 780ecf8b63..6e4412de37 100644
--- a/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg
@@ -13,7 +13,6 @@ weight = -2
 
 [values]
 brim_width = 25
-cool_min_temperature = =material_print_temperature - 10
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral'
 material_print_temperature = =default_material_print_temperature - 2
 multiple_mesh_overlap = 0.2
diff --git a/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg
index 77ba4b5a83..be1ca10f89 100644
--- a/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg
@@ -13,7 +13,6 @@ weight = -4
 
 [values]
 brim_width = 25
-cool_min_temperature = =material_print_temperature - 10
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral'
 material_print_temperature = =default_material_print_temperature + 2
 multiple_mesh_overlap = 0.2
diff --git a/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg
index 30a7870aad..a11e14d732 100644
--- a/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg
@@ -13,7 +13,6 @@ weight = -3
 
 [values]
 brim_width = 25
-cool_min_temperature = =material_print_temperature - 10
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral'
 layer_height = 0.3
 multiple_mesh_overlap = 0.2
diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPLA_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPLA_Draft_Print.inst.cfg
index 657d1321f6..5affdb50fd 100644
--- a/resources/quality/ultimaker3/um3_aa0.8_TPLA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_TPLA_Draft_Print.inst.cfg
@@ -16,7 +16,6 @@ gradual_infill_step_height = =3 * layer_height
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cubic'
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
-material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
 material_print_temperature = =default_material_print_temperature + 0
 prime_tower_enable = False
 speed_print = 45
diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPLA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPLA_Superdraft_Print.inst.cfg
index b915e1aa5b..b3f0fb322d 100644
--- a/resources/quality/ultimaker3/um3_aa0.8_TPLA_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_TPLA_Superdraft_Print.inst.cfg
@@ -16,7 +16,6 @@ gradual_infill_step_height = =3 * layer_height
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cubic'
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
-material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
 material_print_temperature = =default_material_print_temperature + 5
 prime_tower_enable = False
 speed_infill = =math.ceil(speed_print * 30 / 30)
diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPLA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPLA_Verydraft_Print.inst.cfg
index c3880c681b..cda3cf8b56 100644
--- a/resources/quality/ultimaker3/um3_aa0.8_TPLA_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_TPLA_Verydraft_Print.inst.cfg
@@ -16,7 +16,6 @@ gradual_infill_step_height = =3 * layer_height
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cubic'
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
-material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
 material_print_temperature = =default_material_print_temperature + 5
 prime_tower_enable = False
 speed_infill = =math.ceil(speed_print * 30 / 35)
diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg
index 90a451e472..ac0badf089 100644
--- a/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg
@@ -13,7 +13,6 @@ weight = -2
 
 [values]
 brim_width = 8.75
-cool_min_temperature = =material_print_temperature - 10
 gradual_infill_step_height = =4 * layer_height
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d'
 infill_sparse_density = 15
@@ -21,7 +20,7 @@ machine_nozzle_cool_down_speed = 0.5
 machine_nozzle_heat_up_speed = 2.5
 material_final_print_temperature = =material_print_temperature - 10
 material_flow = 105
-material_initial_print_temperature = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature - 10
 material_print_temperature = =default_material_print_temperature - 2
 multiple_mesh_overlap = 0.2
 prime_tower_enable = True
diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg
index d1d08ee39f..a068d842e2 100644
--- a/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg
@@ -13,7 +13,6 @@ weight = -4
 
 [values]
 brim_width = 8.75
-cool_min_temperature = =material_print_temperature - 10
 gradual_infill_step_height = =4 * layer_height
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d'
 infill_sparse_density = 15
@@ -22,7 +21,7 @@ machine_nozzle_cool_down_speed = 0.5
 machine_nozzle_heat_up_speed = 2.5
 material_final_print_temperature = =material_print_temperature - 10
 material_flow = 105
-material_initial_print_temperature = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature - 10
 material_print_temperature = =default_material_print_temperature + 2
 multiple_mesh_overlap = 0.2
 prime_tower_enable = True
diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg
index 421fce0265..a2a5a43f3d 100644
--- a/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg
@@ -13,7 +13,6 @@ weight = -3
 
 [values]
 brim_width = 8.75
-cool_min_temperature = =material_print_temperature - 10
 gradual_infill_step_height = =4 * layer_height
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d'
 infill_sparse_density = 15
@@ -22,7 +21,7 @@ machine_nozzle_cool_down_speed = 0.5
 machine_nozzle_heat_up_speed = 2.5
 material_final_print_temperature = =material_print_temperature - 10
 material_flow = 105
-material_initial_print_temperature = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature - 10
 multiple_mesh_overlap = 0.2
 prime_tower_enable = True
 prime_tower_flow = 100
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_pla_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_pla_0.1mm.inst.cfg
index d1c4210f33..47d387be54 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.25_pla_0.1mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_pla_0.1mm.inst.cfg
@@ -17,7 +17,6 @@ infill_overlap = =0 if infill_sparse_density > 80 else 10
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
 machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_heat_up_speed = 1.4
-material_initial_print_temperature = =material_print_temperature - 10
 material_print_temperature = 190
 retraction_hop = 0.2
 skin_overlap = 5
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_pp_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_pp_0.1mm.inst.cfg
index b0713de4f9..8037a47780 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.25_pp_0.1mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_pp_0.1mm.inst.cfg
@@ -14,12 +14,11 @@ weight = 0
 
 [values]
 brim_width = 10
-cool_min_temperature = =material_print_temperature - 10
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral'
 infill_wipe_dist = 0.1
 machine_min_cool_heat_time_window = 15
 material_final_print_temperature = =material_print_temperature - 10
-material_initial_print_temperature = =material_print_temperature - 5
+material_initial_print_temperature = =material_print_temperature - 10
 material_print_temperature = =default_material_print_temperature - 15
 multiple_mesh_overlap = 0
 prime_tower_enable = False
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_tough-pla_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_tough-pla_0.1mm.inst.cfg
index 50450ccedb..5d594381c2 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.25_tough-pla_0.1mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_tough-pla_0.1mm.inst.cfg
@@ -17,7 +17,6 @@ infill_overlap = =0 if infill_sparse_density > 80 else 10
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
 machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_heat_up_speed = 1.4
-material_initial_print_temperature = =material_print_temperature - 10
 material_print_temperature = =default_material_print_temperature - 15
 skin_overlap = 5
 speed_print = 30
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.06mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.06mm.inst.cfg
index 2bbb5244c7..6072b67a0e 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.06mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.06mm.inst.cfg
@@ -15,7 +15,6 @@ weight = 1
 machine_nozzle_cool_down_speed = 0.8
 machine_nozzle_heat_up_speed = 1.5
 material_final_print_temperature = =material_print_temperature - 20
-material_initial_print_temperature = =material_print_temperature - 15
 material_print_temperature = =default_material_print_temperature + 5
 prime_tower_enable = False
 raft_airgap = 0.15
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.15mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.15mm.inst.cfg
index 186f7e5600..61674bc415 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.15mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.15mm.inst.cfg
@@ -15,7 +15,6 @@ weight = -1
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
 material_final_print_temperature = =material_print_temperature - 20
-material_initial_print_temperature = =material_print_temperature - 15
 material_print_temperature = =default_material_print_temperature + 15
 prime_tower_enable = False
 raft_airgap = 0.15
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.1mm.inst.cfg
index cb6b776e1f..39c7d51e9e 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.1mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.1mm.inst.cfg
@@ -15,7 +15,6 @@ weight = 0
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
 material_final_print_temperature = =material_print_temperature - 20
-material_initial_print_temperature = =material_print_temperature - 15
 material_print_temperature = =default_material_print_temperature + 10
 prime_tower_enable = False
 raft_airgap = 0.15
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.2mm.inst.cfg
index d228fd481d..8163d77214 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.2mm.inst.cfg
@@ -15,7 +15,6 @@ weight = -2
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
 material_final_print_temperature = =material_print_temperature - 20
-material_initial_print_temperature = =material_print_temperature - 15
 material_print_temperature = =default_material_print_temperature + 20
 prime_tower_enable = False
 raft_airgap = 0.15
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe-plus_0.06mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe-plus_0.06mm.inst.cfg
index 05b43752d0..52b7a6e17e 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe-plus_0.06mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe-plus_0.06mm.inst.cfg
@@ -17,7 +17,6 @@ infill_wipe_dist = 0
 machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
-material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature + 2
 multiple_mesh_overlap = 0
 prime_tower_enable = True
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe-plus_0.15mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe-plus_0.15mm.inst.cfg
index 8ddcb67e9c..8b116c1faa 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe-plus_0.15mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe-plus_0.15mm.inst.cfg
@@ -15,7 +15,6 @@ weight = -1
 infill_overlap = 0
 infill_wipe_dist = 0
 machine_min_cool_heat_time_window = 15
-material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature + 10
 multiple_mesh_overlap = 0
 prime_tower_enable = True
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe-plus_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe-plus_0.1mm.inst.cfg
index ad0d267ef5..87d7380812 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe-plus_0.1mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe-plus_0.1mm.inst.cfg
@@ -17,7 +17,6 @@ infill_wipe_dist = 0
 machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
-material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature + 5
 multiple_mesh_overlap = 0
 prime_tower_enable = True
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe-plus_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe-plus_0.2mm.inst.cfg
index 9a46fd5d1c..89d30a97d5 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe-plus_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe-plus_0.2mm.inst.cfg
@@ -15,7 +15,6 @@ weight = -2
 infill_overlap = 0
 infill_wipe_dist = 0
 machine_min_cool_heat_time_window = 15
-material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature + 10
 multiple_mesh_overlap = 0
 prime_tower_enable = True
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe_0.06mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe_0.06mm.inst.cfg
index 70b1b3156a..58c449e7f3 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe_0.06mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe_0.06mm.inst.cfg
@@ -15,7 +15,6 @@ weight = 1
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
-material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature - 5
 retraction_prime_speed = =retraction_speed
 speed_infill = =math.ceil(speed_print * 40 / 50)
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe_0.15mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe_0.15mm.inst.cfg
index 2e98ae7737..3162e0712a 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe_0.15mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe_0.15mm.inst.cfg
@@ -13,7 +13,6 @@ weight = -1
 
 [values]
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
-material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature + 5
 retraction_prime_speed = =retraction_speed
 speed_infill = =math.ceil(speed_print * 50 / 60)
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe_0.1mm.inst.cfg
index abe4d7a801..fe196e783a 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe_0.1mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe_0.1mm.inst.cfg
@@ -15,7 +15,6 @@ weight = 0
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
-material_initial_print_temperature = =material_print_temperature - 5
 retraction_prime_speed = =retraction_speed
 speed_infill = =math.ceil(speed_print * 45 / 55)
 speed_print = 55
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe_0.2mm.inst.cfg
index e6194cd1b9..dbfebcc02b 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe_0.2mm.inst.cfg
@@ -13,7 +13,6 @@ weight = -2
 
 [values]
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
-material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature + 10
 retraction_prime_speed = =retraction_speed
 skin_overlap = 20
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_nylon_0.06mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_nylon_0.06mm.inst.cfg
index b6facd3fc2..47ba4ff9ab 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_nylon_0.06mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_nylon_0.06mm.inst.cfg
@@ -12,7 +12,6 @@ variant = AA 0.4
 weight = 1
 
 [values]
-material_initial_print_temperature = =material_print_temperature - 5
 ooze_shield_angle = 40
 raft_airgap = 0.4
 retraction_prime_speed = =retraction_speed
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_nylon_0.15mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_nylon_0.15mm.inst.cfg
index 82731d1a15..79100cc944 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_nylon_0.15mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_nylon_0.15mm.inst.cfg
@@ -12,7 +12,6 @@ variant = AA 0.4
 weight = -1
 
 [values]
-material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature + 5
 ooze_shield_angle = 40
 raft_airgap = 0.4
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_nylon_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_nylon_0.1mm.inst.cfg
index 3448c96d5f..5fb48ed3e4 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_nylon_0.1mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_nylon_0.1mm.inst.cfg
@@ -12,7 +12,6 @@ variant = AA 0.4
 weight = 0
 
 [values]
-material_initial_print_temperature = =material_print_temperature - 5
 ooze_shield_angle = 40
 raft_airgap = 0.4
 retraction_prime_speed = =retraction_speed
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_nylon_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_nylon_0.2mm.inst.cfg
index 59b661f405..23b81943ef 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_nylon_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_nylon_0.2mm.inst.cfg
@@ -12,7 +12,6 @@ variant = AA 0.4
 weight = -2
 
 [values]
-material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature + 10
 ooze_shield_angle = 40
 raft_airgap = 0.4
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.06mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.06mm.inst.cfg
index c3a7f28c24..85b364c042 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.06mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.06mm.inst.cfg
@@ -20,7 +20,6 @@ infill_wipe_dist = 0.1
 machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
-material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature - 10
 multiple_mesh_overlap = 0
 ooze_shield_angle = 40
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.15mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.15mm.inst.cfg
index 0d40b98d52..3118e4e176 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.15mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.15mm.inst.cfg
@@ -19,7 +19,6 @@ infill_wipe_dist = 0.1
 machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
-material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature + 10
 multiple_mesh_overlap = 0
 ooze_shield_angle = 40
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.1mm.inst.cfg
index 741b2cc383..4a0041a1fa 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.1mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.1mm.inst.cfg
@@ -19,7 +19,6 @@ infill_wipe_dist = 0.1
 machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
-material_initial_print_temperature = =material_print_temperature - 5
 multiple_mesh_overlap = 0
 ooze_shield_angle = 40
 prime_tower_enable = True
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.2mm.inst.cfg
index 1253cd27cf..981cf334a3 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.2mm.inst.cfg
@@ -20,7 +20,6 @@ infill_wipe_dist = 0.1
 machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
-material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature + 10
 multiple_mesh_overlap = 0
 ooze_shield_angle = 40
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_petg_0.06mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_petg_0.06mm.inst.cfg
index 07499c8f2f..5022773478 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_petg_0.06mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_petg_0.06mm.inst.cfg
@@ -15,7 +15,6 @@ weight = 1
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
-material_initial_print_temperature = =material_print_temperature - 10
 material_print_temperature = =default_material_print_temperature - 10
 speed_infill = =math.ceil(speed_print * 40 / 50)
 speed_print = 50
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_petg_0.15mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_petg_0.15mm.inst.cfg
index d20a8bb9fa..de0126e750 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_petg_0.15mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_petg_0.15mm.inst.cfg
@@ -13,7 +13,6 @@ weight = -1
 
 [values]
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
-material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature
 speed_infill = =math.ceil(speed_print * 50 / 60)
 speed_print = 60
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_petg_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_petg_0.1mm.inst.cfg
index 289595576f..3c02014866 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_petg_0.1mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_petg_0.1mm.inst.cfg
@@ -15,7 +15,6 @@ weight = 0
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
-material_initial_print_temperature = =material_print_temperature - 10
 material_print_temperature = =default_material_print_temperature - 5
 speed_infill = =math.ceil(speed_print * 45 / 55)
 speed_print = 55
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_petg_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_petg_0.2mm.inst.cfg
index a410fb7c4f..7d62b4476d 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_petg_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_petg_0.2mm.inst.cfg
@@ -13,7 +13,6 @@ weight = -2
 
 [values]
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
-material_initial_print_temperature = =material_print_temperature
 material_print_temperature = =default_material_print_temperature + 5
 skin_overlap = 20
 speed_infill = =math.ceil(speed_print * 50 / 60)
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_pp_0.15mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_pp_0.15mm.inst.cfg
index 8a4dc3f47d..0de966fb2c 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_pp_0.15mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_pp_0.15mm.inst.cfg
@@ -13,15 +13,14 @@ weight = -1
 
 [values]
 brim_width = 20
-cool_min_temperature = =material_print_temperature - 10
 infill_overlap = 0
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral'
 infill_wipe_dist = 0.1
 machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
-material_final_print_temperature = =material_print_temperature - 12
-material_initial_print_temperature = =material_print_temperature - 2
+material_final_print_temperature = =material_print_temperature - 10
+material_initial_print_temperature = =material_print_temperature - 10
 material_print_temperature = =default_material_print_temperature - 13
 multiple_mesh_overlap = 0
 prime_tower_enable = False
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_pp_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_pp_0.1mm.inst.cfg
index f0d9c7aff7..27776f6b37 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_pp_0.1mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_pp_0.1mm.inst.cfg
@@ -13,7 +13,6 @@ weight = 0
 
 [values]
 brim_width = 20
-cool_min_temperature = =material_print_temperature - 10
 infill_overlap = 0
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral'
 infill_wipe_dist = 0.1
@@ -21,7 +20,7 @@ machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
 material_final_print_temperature = =material_print_temperature - 10
-material_initial_print_temperature = =material_print_temperature - 5
+material_initial_print_temperature = =material_print_temperature - 10
 material_print_temperature = =default_material_print_temperature - 15
 multiple_mesh_overlap = 0
 prime_tower_enable = False
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_pp_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_pp_0.2mm.inst.cfg
index 8ba022244b..4034da9598 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_pp_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_pp_0.2mm.inst.cfg
@@ -13,7 +13,6 @@ weight = -2
 
 [values]
 brim_width = 20
-cool_min_temperature = =material_print_temperature - 10
 infill_overlap = 0
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral'
 infill_wipe_dist = 0.1
@@ -21,7 +20,7 @@ machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
 material_final_print_temperature = =material_print_temperature - 10
-material_initial_print_temperature = =material_print_temperature - 5
+material_initial_print_temperature = =material_print_temperature - 10
 material_print_temperature = =default_material_print_temperature - 5
 multiple_mesh_overlap = 0
 prime_tower_enable = False
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_tpu_0.15mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_tpu_0.15mm.inst.cfg
index 4b31a831f7..56e041ce92 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_tpu_0.15mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_tpu_0.15mm.inst.cfg
@@ -13,7 +13,6 @@ weight = -1
 
 [values]
 brim_width = 8.75
-cool_min_temperature = =material_print_temperature - 10
 gradual_infill_step_height = =5 * layer_height
 infill_overlap = 0
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d'
@@ -24,7 +23,7 @@ machine_nozzle_cool_down_speed = 0.5
 machine_nozzle_heat_up_speed = 2.5
 material_final_print_temperature = =material_print_temperature - 10
 material_flow = 106
-material_initial_print_temperature = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature - 10
 material_print_temperature = =default_material_print_temperature + 2
 multiple_mesh_overlap = 0
 prime_tower_wipe_enabled = True
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_tpu_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_tpu_0.1mm.inst.cfg
index 8b767d51cf..bfa1fc7dbd 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_tpu_0.1mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_tpu_0.1mm.inst.cfg
@@ -13,7 +13,6 @@ weight = 0
 
 [values]
 brim_width = 8.75
-cool_min_temperature = =material_print_temperature - 10
 gradual_infill_step_height = =5 * layer_height
 infill_overlap = 0
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d'
@@ -24,7 +23,7 @@ machine_nozzle_cool_down_speed = 0.5
 machine_nozzle_heat_up_speed = 2.5
 material_final_print_temperature = =material_print_temperature - 10
 material_flow = 106
-material_initial_print_temperature = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature - 10
 multiple_mesh_overlap = 0
 prime_tower_wipe_enabled = True
 retraction_count_max = 15
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_tpu_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_tpu_0.2mm.inst.cfg
index cec14f8798..a73742b8ad 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_tpu_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_tpu_0.2mm.inst.cfg
@@ -13,7 +13,6 @@ weight = -2
 
 [values]
 brim_width = 8.75
-cool_min_temperature = =material_print_temperature - 10
 gradual_infill_step_height = =5 * layer_height
 infill_overlap = 0
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d'
@@ -24,7 +23,7 @@ machine_nozzle_cool_down_speed = 0.5
 machine_nozzle_heat_up_speed = 2.5
 material_final_print_temperature = =material_print_temperature - 10
 material_flow = 106
-material_initial_print_temperature = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature - 10
 material_print_temperature = =default_material_print_temperature + 2
 multiple_mesh_overlap = 0
 prime_tower_wipe_enabled = True
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_pla_0.2mm.inst.cfg
index 44cd000085..74ebe86eec 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_pla_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_pla_0.2mm.inst.cfg
@@ -15,7 +15,6 @@ weight = -2
 gradual_infill_step_height = =3 * layer_height
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
-material_initial_print_temperature = =material_print_temperature - 10
 material_print_temperature = =default_material_print_temperature + 10
 prime_tower_enable = True
 speed_print = 45
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_pla_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_pla_0.3mm.inst.cfg
index 9e3a1a8885..f2c753dd9b 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_pla_0.3mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_pla_0.3mm.inst.cfg
@@ -15,7 +15,6 @@ weight = -3
 gradual_infill_step_height = =3 * layer_height
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
-material_initial_print_temperature = =material_print_temperature - 10
 material_print_temperature = =default_material_print_temperature + 10
 prime_tower_enable = True
 speed_print = 45
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_pla_0.4mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_pla_0.4mm.inst.cfg
index 847a4d5dfe..86c201650e 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_pla_0.4mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_pla_0.4mm.inst.cfg
@@ -15,7 +15,6 @@ weight = -4
 gradual_infill_step_height = =3 * layer_height
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
-material_initial_print_temperature = =material_print_temperature - 10
 material_print_temperature = =default_material_print_temperature + 15
 prime_tower_enable = True
 speed_infill = =math.ceil(speed_print * 35 / 45)
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.2mm.inst.cfg
index 52fc4ff2fb..9b45f8e0ee 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.2mm.inst.cfg
@@ -13,8 +13,9 @@ weight = -2
 
 [values]
 brim_width = 25
-cool_min_temperature = =material_print_temperature - 10
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral'
+material_final_print_temperature = =material_print_temperature - 10
+material_initial_print_temperature = =material_print_temperature - 10
 material_print_temperature = =default_material_print_temperature - 2
 multiple_mesh_overlap = 0.2
 prime_tower_enable = True
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.3mm.inst.cfg
index e1be37414c..627927ad70 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.3mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.3mm.inst.cfg
@@ -13,8 +13,9 @@ weight = -3
 
 [values]
 brim_width = 25
-cool_min_temperature = =material_print_temperature - 10
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral'
+material_final_print_temperature = =material_print_temperature - 10
+material_initial_print_temperature = =material_print_temperature - 10
 multiple_mesh_overlap = 0.2
 prime_tower_enable = True
 prime_tower_flow = 100
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.4mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.4mm.inst.cfg
index 7f3e0d8f0a..d5b08ff2ff 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.4mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.4mm.inst.cfg
@@ -13,8 +13,9 @@ weight = -4
 
 [values]
 brim_width = 25
-cool_min_temperature = =material_print_temperature - 10
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral'
+material_final_print_temperature = =material_print_temperature - 10
+material_initial_print_temperature = =material_print_temperature - 10
 material_print_temperature = =default_material_print_temperature + 2
 multiple_mesh_overlap = 0.2
 prime_tower_enable = True
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_tough-pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_tough-pla_0.2mm.inst.cfg
index 1e40c7bb7e..df9e0f75f1 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_tough-pla_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_tough-pla_0.2mm.inst.cfg
@@ -16,7 +16,6 @@ gradual_infill_step_height = =3 * layer_height
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cubic'
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
-material_initial_print_temperature = =material_print_temperature - 10
 material_print_temperature = =default_material_print_temperature + 0
 prime_tower_enable = False
 speed_print = 45
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_tough-pla_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_tough-pla_0.3mm.inst.cfg
index 0476f2971d..9e583429a0 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_tough-pla_0.3mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_tough-pla_0.3mm.inst.cfg
@@ -16,7 +16,6 @@ gradual_infill_step_height = =3 * layer_height
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cubic'
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
-material_initial_print_temperature = =material_print_temperature - 10
 material_print_temperature = =default_material_print_temperature + 5
 prime_tower_enable = False
 speed_infill = =math.ceil(speed_print * 30 / 35)
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_tough-pla_0.4mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_tough-pla_0.4mm.inst.cfg
index d03923f7c0..f2cfb3997f 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_tough-pla_0.4mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_tough-pla_0.4mm.inst.cfg
@@ -16,7 +16,6 @@ gradual_infill_step_height = =3 * layer_height
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cubic'
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
-material_initial_print_temperature = =material_print_temperature - 10
 material_print_temperature = =default_material_print_temperature + 5
 prime_tower_enable = False
 speed_infill = =math.ceil(speed_print * 30 / 30)
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.2mm.inst.cfg
index db326595bf..2c91826f00 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.2mm.inst.cfg
@@ -13,13 +13,12 @@ weight = -2
 
 [values]
 brim_width = 8.75
-cool_min_temperature = =material_print_temperature - 10
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d'
 machine_nozzle_cool_down_speed = 0.5
 machine_nozzle_heat_up_speed = 2.5
 material_final_print_temperature = =material_print_temperature - 10
 material_flow = 105
-material_initial_print_temperature = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature - 10
 material_print_temperature = =default_material_print_temperature - 2
 multiple_mesh_overlap = 0.2
 prime_tower_enable = True
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.3mm.inst.cfg
index cec71414b7..3be1ad0bd9 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.3mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.3mm.inst.cfg
@@ -13,14 +13,13 @@ weight = -3
 
 [values]
 brim_width = 8.75
-cool_min_temperature = =material_print_temperature - 10
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d'
 infill_sparse_density = 15
 machine_nozzle_cool_down_speed = 0.5
 machine_nozzle_heat_up_speed = 2.5
 material_final_print_temperature = =material_print_temperature - 10
 material_flow = 105
-material_initial_print_temperature = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature - 10
 multiple_mesh_overlap = 0.2
 prime_tower_enable = True
 prime_tower_flow = 100
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.4mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.4mm.inst.cfg
index 53aafa0648..ac5987e95f 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.4mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.4mm.inst.cfg
@@ -13,14 +13,13 @@ weight = -4
 
 [values]
 brim_width = 8.75
-cool_min_temperature = =material_print_temperature - 10
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d'
 infill_sparse_density = 15
 machine_nozzle_cool_down_speed = 0.5
 machine_nozzle_heat_up_speed = 2.5
 material_final_print_temperature = =material_print_temperature - 10
 material_flow = 105
-material_initial_print_temperature = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature - 10
 material_print_temperature = =default_material_print_temperature + 2
 multiple_mesh_overlap = 0.2
 prime_tower_enable = True
diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_pla_0.15mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_pla_0.15mm.inst.cfg
index fcd297c6cf..8f9060d30e 100644
--- a/resources/quality/ultimaker_s3/um_s3_cc0.4_pla_0.15mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_pla_0.15mm.inst.cfg
@@ -17,7 +17,6 @@ gradual_infill_step_height = =3 * layer_height
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
-material_initial_print_temperature = =material_print_temperature - 10
 material_print_temperature = =default_material_print_temperature + 10
 prime_tower_enable = True
 speed_print = 45
diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_pla_0.2mm.inst.cfg
index 45c56b361c..caa267a431 100644
--- a/resources/quality/ultimaker_s3/um_s3_cc0.4_pla_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_pla_0.2mm.inst.cfg
@@ -17,7 +17,6 @@ gradual_infill_step_height = =3 * layer_height
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
-material_initial_print_temperature = =material_print_temperature - 10
 material_print_temperature = =default_material_print_temperature + 10
 prime_tower_enable = True
 speed_print = 45
diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.6_pla_0.15mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.6_pla_0.15mm.inst.cfg
index c3ad9dd43f..67efc2450b 100644
--- a/resources/quality/ultimaker_s3/um_s3_cc0.6_pla_0.15mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_cc0.6_pla_0.15mm.inst.cfg
@@ -17,7 +17,6 @@ gradual_infill_step_height = =3 * layer_height
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
-material_initial_print_temperature = =material_print_temperature - 10
 material_print_temperature = =default_material_print_temperature + 10
 prime_tower_enable = True
 speed_print = 45
diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.6_pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.6_pla_0.2mm.inst.cfg
index 5637ac9f65..c88230743c 100644
--- a/resources/quality/ultimaker_s3/um_s3_cc0.6_pla_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_cc0.6_pla_0.2mm.inst.cfg
@@ -17,7 +17,6 @@ gradual_infill_step_height = =3 * layer_height
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
-material_initial_print_temperature = =material_print_temperature - 10
 material_print_temperature = =default_material_print_temperature + 10
 prime_tower_enable = True
 speed_print = 45
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_pla_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_pla_0.1mm.inst.cfg
index 1047547cd0..dcbb270e44 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.25_pla_0.1mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_pla_0.1mm.inst.cfg
@@ -17,7 +17,6 @@ infill_overlap = =0 if infill_sparse_density > 80 else 10
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
 machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_heat_up_speed = 1.4
-material_initial_print_temperature = =material_print_temperature - 10
 material_print_temperature = 190
 retraction_hop = 0.2
 skin_overlap = 5
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_pp_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_pp_0.1mm.inst.cfg
index e2f539e49b..3b82b0886c 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.25_pp_0.1mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_pp_0.1mm.inst.cfg
@@ -14,12 +14,11 @@ weight = 0
 
 [values]
 brim_width = 10
-cool_min_temperature = =material_print_temperature - 10
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral'
 infill_wipe_dist = 0.1
 machine_min_cool_heat_time_window = 15
 material_final_print_temperature = =material_print_temperature - 10
-material_initial_print_temperature = =material_print_temperature - 5
+material_initial_print_temperature = =material_print_temperature - 10
 material_print_temperature = =default_material_print_temperature - 15
 multiple_mesh_overlap = 0
 prime_tower_enable = False
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_tough-pla_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_tough-pla_0.1mm.inst.cfg
index c30cbadfc3..a3be2cd1e6 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.25_tough-pla_0.1mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_tough-pla_0.1mm.inst.cfg
@@ -17,7 +17,6 @@ infill_overlap = =0 if infill_sparse_density > 80 else 10
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
 machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_heat_up_speed = 1.4
-material_initial_print_temperature = =material_print_temperature - 10
 material_print_temperature = =default_material_print_temperature - 15
 skin_overlap = 5
 speed_print = 30
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_abs_0.06mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_abs_0.06mm.inst.cfg
index 2bbdf917b8..9f4ba9b560 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_abs_0.06mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_abs_0.06mm.inst.cfg
@@ -15,7 +15,6 @@ weight = 1
 machine_nozzle_cool_down_speed = 0.8
 machine_nozzle_heat_up_speed = 1.5
 material_final_print_temperature = =material_print_temperature - 20
-material_initial_print_temperature = =material_print_temperature - 15
 material_print_temperature = =default_material_print_temperature + 5
 prime_tower_enable = False
 raft_airgap = 0.15
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_abs_0.15mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_abs_0.15mm.inst.cfg
index d26a9582f3..988a7f49cf 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_abs_0.15mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_abs_0.15mm.inst.cfg
@@ -15,7 +15,6 @@ weight = -1
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
 material_final_print_temperature = =material_print_temperature - 20
-material_initial_print_temperature = =material_print_temperature - 15
 material_print_temperature = =default_material_print_temperature + 15
 prime_tower_enable = False
 raft_airgap = 0.15
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_abs_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_abs_0.1mm.inst.cfg
index d7b688972b..6e8bb243a8 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_abs_0.1mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_abs_0.1mm.inst.cfg
@@ -15,7 +15,6 @@ weight = 0
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
 material_final_print_temperature = =material_print_temperature - 20
-material_initial_print_temperature = =material_print_temperature - 15
 material_print_temperature = =default_material_print_temperature + 10
 prime_tower_enable = False
 raft_airgap = 0.15
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_abs_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_abs_0.2mm.inst.cfg
index 5a1e339d12..70503d2cb7 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_abs_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_abs_0.2mm.inst.cfg
@@ -15,7 +15,6 @@ weight = -2
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
 material_final_print_temperature = =material_print_temperature - 20
-material_initial_print_temperature = =material_print_temperature - 15
 material_print_temperature = =default_material_print_temperature + 20
 prime_tower_enable = False
 raft_airgap = 0.15
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe-plus_0.06mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe-plus_0.06mm.inst.cfg
index d38604389b..2ad61e2b8e 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe-plus_0.06mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe-plus_0.06mm.inst.cfg
@@ -17,7 +17,6 @@ infill_wipe_dist = 0
 machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
-material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature + 2
 multiple_mesh_overlap = 0
 prime_tower_enable = True
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe-plus_0.15mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe-plus_0.15mm.inst.cfg
index 5bda1bda2d..4e77666a86 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe-plus_0.15mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe-plus_0.15mm.inst.cfg
@@ -15,7 +15,6 @@ weight = -1
 infill_overlap = 0
 infill_wipe_dist = 0
 machine_min_cool_heat_time_window = 15
-material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature + 10
 multiple_mesh_overlap = 0
 prime_tower_enable = True
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe-plus_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe-plus_0.1mm.inst.cfg
index c659172901..87c836e270 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe-plus_0.1mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe-plus_0.1mm.inst.cfg
@@ -17,7 +17,6 @@ infill_wipe_dist = 0
 machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
-material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature + 5
 multiple_mesh_overlap = 0
 prime_tower_enable = True
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe-plus_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe-plus_0.2mm.inst.cfg
index ee390485f3..25819c37f3 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe-plus_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe-plus_0.2mm.inst.cfg
@@ -15,7 +15,6 @@ weight = -2
 infill_overlap = 0
 infill_wipe_dist = 0
 machine_min_cool_heat_time_window = 15
-material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature + 10
 multiple_mesh_overlap = 0
 prime_tower_enable = True
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe_0.06mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe_0.06mm.inst.cfg
index 5e5d4a258e..14071bfa30 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe_0.06mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe_0.06mm.inst.cfg
@@ -15,7 +15,6 @@ weight = 1
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
-material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature - 5
 retraction_prime_speed = =retraction_speed
 speed_infill = =math.ceil(speed_print * 40 / 50)
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe_0.15mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe_0.15mm.inst.cfg
index ac5d97b37e..0b63f0109c 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe_0.15mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe_0.15mm.inst.cfg
@@ -13,7 +13,6 @@ weight = -1
 
 [values]
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
-material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature + 5
 retraction_prime_speed = =retraction_speed
 speed_infill = =math.ceil(speed_print * 50 / 60)
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe_0.1mm.inst.cfg
index 79c29ceee7..75f5740969 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe_0.1mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe_0.1mm.inst.cfg
@@ -15,7 +15,6 @@ weight = 0
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
-material_initial_print_temperature = =material_print_temperature - 5
 retraction_prime_speed = =retraction_speed
 speed_infill = =math.ceil(speed_print * 45 / 55)
 speed_print = 55
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe_0.2mm.inst.cfg
index 32902774ca..1d846288ba 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe_0.2mm.inst.cfg
@@ -13,7 +13,6 @@ weight = -2
 
 [values]
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
-material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature + 10
 retraction_prime_speed = =retraction_speed
 skin_overlap = 20
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_nylon_0.06mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_nylon_0.06mm.inst.cfg
index 47d8cd7ace..6ecd43a41c 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_nylon_0.06mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_nylon_0.06mm.inst.cfg
@@ -12,7 +12,6 @@ variant = AA 0.4
 weight = 1
 
 [values]
-material_initial_print_temperature = =material_print_temperature - 5
 ooze_shield_angle = 40
 raft_airgap = 0.4
 retraction_prime_speed = =retraction_speed
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_nylon_0.15mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_nylon_0.15mm.inst.cfg
index a123553a11..7f7acaecb9 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_nylon_0.15mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_nylon_0.15mm.inst.cfg
@@ -12,7 +12,6 @@ variant = AA 0.4
 weight = -1
 
 [values]
-material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature + 5
 ooze_shield_angle = 40
 raft_airgap = 0.4
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_nylon_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_nylon_0.1mm.inst.cfg
index 10ca1cf7c2..a44c7b9703 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_nylon_0.1mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_nylon_0.1mm.inst.cfg
@@ -12,7 +12,6 @@ variant = AA 0.4
 weight = 0
 
 [values]
-material_initial_print_temperature = =material_print_temperature - 5
 ooze_shield_angle = 40
 raft_airgap = 0.4
 retraction_prime_speed = =retraction_speed
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_nylon_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_nylon_0.2mm.inst.cfg
index 648a88e484..fdd3eb4fea 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_nylon_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_nylon_0.2mm.inst.cfg
@@ -12,7 +12,6 @@ variant = AA 0.4
 weight = -2
 
 [values]
-material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature + 10
 ooze_shield_angle = 40
 raft_airgap = 0.4
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.06mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.06mm.inst.cfg
index f93b8a8d34..52b7291852 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.06mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.06mm.inst.cfg
@@ -20,7 +20,6 @@ infill_wipe_dist = 0.1
 machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
-material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature - 10
 multiple_mesh_overlap = 0
 ooze_shield_angle = 40
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.15mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.15mm.inst.cfg
index ee64ec53c9..981c52cee2 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.15mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.15mm.inst.cfg
@@ -19,7 +19,6 @@ infill_wipe_dist = 0.1
 machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
-material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature + 10
 multiple_mesh_overlap = 0
 ooze_shield_angle = 40
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.1mm.inst.cfg
index f2070a1cab..14a48a425b 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.1mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.1mm.inst.cfg
@@ -19,7 +19,6 @@ infill_wipe_dist = 0.1
 machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
-material_initial_print_temperature = =material_print_temperature - 5
 multiple_mesh_overlap = 0
 ooze_shield_angle = 40
 prime_tower_enable = True
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.2mm.inst.cfg
index d7105b31aa..dfa955fc9d 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.2mm.inst.cfg
@@ -20,7 +20,6 @@ infill_wipe_dist = 0.1
 machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
-material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature + 10
 multiple_mesh_overlap = 0
 ooze_shield_angle = 40
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_petg_0.06mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_petg_0.06mm.inst.cfg
index 1510e3fcce..75f004ec4c 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_petg_0.06mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_petg_0.06mm.inst.cfg
@@ -15,7 +15,6 @@ weight = 1
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
-material_initial_print_temperature = =material_print_temperature - 10
 material_print_temperature = =default_material_print_temperature - 10
 speed_infill = =math.ceil(speed_print * 40 / 50)
 speed_print = 50
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_petg_0.15mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_petg_0.15mm.inst.cfg
index 21e9e47e20..afe24b51be 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_petg_0.15mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_petg_0.15mm.inst.cfg
@@ -13,7 +13,6 @@ weight = -1
 
 [values]
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
-material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature
 speed_infill = =math.ceil(speed_print * 50 / 60)
 speed_print = 60
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_petg_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_petg_0.1mm.inst.cfg
index 2a467e57d4..c29e866e3a 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_petg_0.1mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_petg_0.1mm.inst.cfg
@@ -15,7 +15,6 @@ weight = 0
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
-material_initial_print_temperature = =material_print_temperature - 10
 material_print_temperature = =default_material_print_temperature - 5
 speed_infill = =math.ceil(speed_print * 45 / 55)
 speed_print = 55
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_petg_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_petg_0.2mm.inst.cfg
index 47041319e3..6a4f979cd7 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_petg_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_petg_0.2mm.inst.cfg
@@ -13,7 +13,6 @@ weight = -2
 
 [values]
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
-material_initial_print_temperature = =material_print_temperature
 material_print_temperature = =default_material_print_temperature + 5
 skin_overlap = 20
 speed_infill = =math.ceil(speed_print * 50 / 60)
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_pp_0.15mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_pp_0.15mm.inst.cfg
index 0f8407ef38..263c900ea4 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_pp_0.15mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_pp_0.15mm.inst.cfg
@@ -13,15 +13,14 @@ weight = -1
 
 [values]
 brim_width = 20
-cool_min_temperature = =material_print_temperature - 10
 infill_overlap = 0
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral'
 infill_wipe_dist = 0.1
 machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
-material_final_print_temperature = =material_print_temperature - 12
-material_initial_print_temperature = =material_print_temperature - 2
+material_final_print_temperature = =material_print_temperature - 10
+material_initial_print_temperature = =material_print_temperature - 10
 material_print_temperature = =default_material_print_temperature - 13
 multiple_mesh_overlap = 0
 prime_tower_enable = False
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_pp_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_pp_0.1mm.inst.cfg
index 04723a0e0a..faa8b08a3e 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_pp_0.1mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_pp_0.1mm.inst.cfg
@@ -13,7 +13,6 @@ weight = 0
 
 [values]
 brim_width = 20
-cool_min_temperature = =material_print_temperature - 10
 infill_overlap = 0
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral'
 infill_wipe_dist = 0.1
@@ -21,7 +20,7 @@ machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
 material_final_print_temperature = =material_print_temperature - 10
-material_initial_print_temperature = =material_print_temperature - 5
+material_initial_print_temperature = =material_print_temperature - 10
 material_print_temperature = =default_material_print_temperature - 15
 multiple_mesh_overlap = 0
 prime_tower_enable = False
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_pp_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_pp_0.2mm.inst.cfg
index 4c095f2db4..b502967784 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_pp_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_pp_0.2mm.inst.cfg
@@ -13,7 +13,6 @@ weight = -2
 
 [values]
 brim_width = 20
-cool_min_temperature = =material_print_temperature - 10
 infill_overlap = 0
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral'
 infill_wipe_dist = 0.1
@@ -21,7 +20,7 @@ machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
 material_final_print_temperature = =material_print_temperature - 10
-material_initial_print_temperature = =material_print_temperature - 5
+material_initial_print_temperature = =material_print_temperature - 10
 material_print_temperature = =default_material_print_temperature - 5
 multiple_mesh_overlap = 0
 prime_tower_enable = False
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_tpu_0.15mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_tpu_0.15mm.inst.cfg
index 79fa239e61..bc4997a764 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_tpu_0.15mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_tpu_0.15mm.inst.cfg
@@ -13,7 +13,6 @@ weight = -1
 
 [values]
 brim_width = 8.75
-cool_min_temperature = =material_print_temperature - 10
 gradual_infill_step_height = =5 * layer_height
 infill_overlap = 0
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d'
@@ -24,7 +23,7 @@ machine_nozzle_cool_down_speed = 0.5
 machine_nozzle_heat_up_speed = 2.5
 material_final_print_temperature = =material_print_temperature - 10
 material_flow = 106
-material_initial_print_temperature = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature - 10
 material_print_temperature = =default_material_print_temperature + 2
 multiple_mesh_overlap = 0
 prime_tower_wipe_enabled = True
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_tpu_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_tpu_0.1mm.inst.cfg
index 7d9ea28a30..e6143b74a7 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_tpu_0.1mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_tpu_0.1mm.inst.cfg
@@ -13,7 +13,6 @@ weight = 0
 
 [values]
 brim_width = 8.75
-cool_min_temperature = =material_print_temperature - 10
 gradual_infill_step_height = =5 * layer_height
 infill_overlap = 0
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d'
@@ -24,7 +23,7 @@ machine_nozzle_cool_down_speed = 0.5
 machine_nozzle_heat_up_speed = 2.5
 material_final_print_temperature = =material_print_temperature - 10
 material_flow = 106
-material_initial_print_temperature = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature - 10
 multiple_mesh_overlap = 0
 prime_tower_wipe_enabled = True
 retraction_count_max = 15
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_tpu_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_tpu_0.2mm.inst.cfg
index 930f1433eb..3f921745eb 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_tpu_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_tpu_0.2mm.inst.cfg
@@ -13,7 +13,6 @@ weight = -2
 
 [values]
 brim_width = 8.75
-cool_min_temperature = =material_print_temperature - 10
 gradual_infill_step_height = =5 * layer_height
 infill_overlap = 0
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d'
@@ -24,7 +23,7 @@ machine_nozzle_cool_down_speed = 0.5
 machine_nozzle_heat_up_speed = 2.5
 material_final_print_temperature = =material_print_temperature - 10
 material_flow = 106
-material_initial_print_temperature = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature - 10
 material_print_temperature = =default_material_print_temperature + 2
 multiple_mesh_overlap = 0
 prime_tower_wipe_enabled = True
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_pla_0.2mm.inst.cfg
index d047f232af..e0882fb68f 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_pla_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_pla_0.2mm.inst.cfg
@@ -15,7 +15,6 @@ weight = -2
 gradual_infill_step_height = =3 * layer_height
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
-material_initial_print_temperature = =material_print_temperature - 10
 material_print_temperature = =default_material_print_temperature + 10
 prime_tower_enable = True
 speed_print = 45
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_pla_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_pla_0.3mm.inst.cfg
index 2b503c7031..8b130c0200 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_pla_0.3mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_pla_0.3mm.inst.cfg
@@ -15,7 +15,6 @@ weight = -3
 gradual_infill_step_height = =3 * layer_height
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
-material_initial_print_temperature = =material_print_temperature - 10
 material_print_temperature = =default_material_print_temperature + 10
 prime_tower_enable = True
 speed_print = 45
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_pla_0.4mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_pla_0.4mm.inst.cfg
index a15208fca0..132d4d3303 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_pla_0.4mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_pla_0.4mm.inst.cfg
@@ -15,7 +15,6 @@ weight = -4
 gradual_infill_step_height = =3 * layer_height
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
-material_initial_print_temperature = =material_print_temperature - 10
 material_print_temperature = =default_material_print_temperature + 15
 prime_tower_enable = True
 speed_infill = =math.ceil(speed_print * 35 / 45)
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.2mm.inst.cfg
index bb766c711a..19a5186662 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.2mm.inst.cfg
@@ -13,8 +13,9 @@ weight = -2
 
 [values]
 brim_width = 25
-cool_min_temperature = =material_print_temperature - 10
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral'
+material_final_print_temperature = =material_print_temperature - 10
+material_initial_print_temperature = =material_print_temperature - 10
 material_print_temperature = =default_material_print_temperature - 2
 multiple_mesh_overlap = 0.2
 prime_tower_enable = True
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.3mm.inst.cfg
index 07aff45049..b471a8be21 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.3mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.3mm.inst.cfg
@@ -13,8 +13,9 @@ weight = -3
 
 [values]
 brim_width = 25
-cool_min_temperature = =material_print_temperature - 10
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral'
+material_final_print_temperature = =material_print_temperature - 10
+material_initial_print_temperature = =material_print_temperature - 10
 multiple_mesh_overlap = 0.2
 prime_tower_enable = True
 prime_tower_flow = 100
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.4mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.4mm.inst.cfg
index 45d3442d89..fc7f8bff48 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.4mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.4mm.inst.cfg
@@ -13,8 +13,9 @@ weight = -4
 
 [values]
 brim_width = 25
-cool_min_temperature = =material_print_temperature - 10
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral'
+material_final_print_temperature = =material_print_temperature - 10
+material_initial_print_temperature = =material_print_temperature - 10
 material_print_temperature = =default_material_print_temperature + 2
 multiple_mesh_overlap = 0.2
 prime_tower_enable = True
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_tough-pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_tough-pla_0.2mm.inst.cfg
index 5baa7c340c..f5a4a1371e 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_tough-pla_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_tough-pla_0.2mm.inst.cfg
@@ -16,7 +16,6 @@ gradual_infill_step_height = =3 * layer_height
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cubic'
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
-material_initial_print_temperature = =material_print_temperature - 10
 material_print_temperature = =default_material_print_temperature + 0
 prime_tower_enable = False
 speed_print = 45
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_tough-pla_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_tough-pla_0.3mm.inst.cfg
index 384c204eaa..1c816201cf 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_tough-pla_0.3mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_tough-pla_0.3mm.inst.cfg
@@ -16,7 +16,6 @@ gradual_infill_step_height = =3 * layer_height
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cubic'
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
-material_initial_print_temperature = =material_print_temperature - 10
 material_print_temperature = =default_material_print_temperature + 5
 prime_tower_enable = False
 speed_infill = =math.ceil(speed_print * 30 / 35)
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_tough-pla_0.4mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_tough-pla_0.4mm.inst.cfg
index 3a42f68f57..49999c24b0 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_tough-pla_0.4mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_tough-pla_0.4mm.inst.cfg
@@ -16,7 +16,6 @@ gradual_infill_step_height = =3 * layer_height
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cubic'
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
-material_initial_print_temperature = =material_print_temperature - 10
 material_print_temperature = =default_material_print_temperature + 5
 prime_tower_enable = False
 speed_infill = =math.ceil(speed_print * 30 / 30)
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.2mm.inst.cfg
index 391ffc1fb0..e145f87271 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.2mm.inst.cfg
@@ -13,13 +13,12 @@ weight = -2
 
 [values]
 brim_width = 8.75
-cool_min_temperature = =material_print_temperature - 10
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d'
 machine_nozzle_cool_down_speed = 0.5
 machine_nozzle_heat_up_speed = 2.5
 material_final_print_temperature = =material_print_temperature - 10
 material_flow = 105
-material_initial_print_temperature = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature - 10
 material_print_temperature = =default_material_print_temperature - 2
 multiple_mesh_overlap = 0.2
 prime_tower_enable = True
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.3mm.inst.cfg
index a6a4527f63..b9db26ad0c 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.3mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.3mm.inst.cfg
@@ -13,14 +13,13 @@ weight = -3
 
 [values]
 brim_width = 8.75
-cool_min_temperature = =material_print_temperature - 10
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d'
 infill_sparse_density = 15
 machine_nozzle_cool_down_speed = 0.5
 machine_nozzle_heat_up_speed = 2.5
 material_final_print_temperature = =material_print_temperature - 10
 material_flow = 105
-material_initial_print_temperature = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature - 10
 multiple_mesh_overlap = 0.2
 prime_tower_enable = True
 prime_tower_flow = 100
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.4mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.4mm.inst.cfg
index 000371039c..06a5cdd350 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.4mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.4mm.inst.cfg
@@ -13,14 +13,13 @@ weight = -4
 
 [values]
 brim_width = 8.75
-cool_min_temperature = =material_print_temperature - 10
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d'
 infill_sparse_density = 15
 machine_nozzle_cool_down_speed = 0.5
 machine_nozzle_heat_up_speed = 2.5
 material_final_print_temperature = =material_print_temperature - 10
 material_flow = 105
-material_initial_print_temperature = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature - 10
 material_print_temperature = =default_material_print_temperature + 2
 multiple_mesh_overlap = 0.2
 prime_tower_enable = True
diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_pla_0.15mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_pla_0.15mm.inst.cfg
index 9d17742bdf..c8e83f34cf 100644
--- a/resources/quality/ultimaker_s5/um_s5_cc0.4_pla_0.15mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_pla_0.15mm.inst.cfg
@@ -17,7 +17,6 @@ gradual_infill_step_height = =3 * layer_height
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
-material_initial_print_temperature = =material_print_temperature - 10
 material_print_temperature = =default_material_print_temperature + 10
 prime_tower_enable = True
 speed_print = 45
diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_pla_0.2mm.inst.cfg
index 52541b2129..92e01db428 100644
--- a/resources/quality/ultimaker_s5/um_s5_cc0.4_pla_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_pla_0.2mm.inst.cfg
@@ -17,7 +17,6 @@ gradual_infill_step_height = =3 * layer_height
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
-material_initial_print_temperature = =material_print_temperature - 10
 material_print_temperature = =default_material_print_temperature + 10
 prime_tower_enable = True
 speed_print = 45
diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.6_pla_0.15mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.6_pla_0.15mm.inst.cfg
index e4ea66ff83..9b5ed80919 100644
--- a/resources/quality/ultimaker_s5/um_s5_cc0.6_pla_0.15mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_cc0.6_pla_0.15mm.inst.cfg
@@ -17,7 +17,6 @@ gradual_infill_step_height = =3 * layer_height
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
-material_initial_print_temperature = =material_print_temperature - 10
 material_print_temperature = =default_material_print_temperature + 10
 prime_tower_enable = True
 speed_print = 45
diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.6_pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.6_pla_0.2mm.inst.cfg
index c851f5760b..26aeb73e37 100644
--- a/resources/quality/ultimaker_s5/um_s5_cc0.6_pla_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_cc0.6_pla_0.2mm.inst.cfg
@@ -17,7 +17,6 @@ gradual_infill_step_height = =3 * layer_height
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
-material_initial_print_temperature = =material_print_temperature - 10
 material_print_temperature = =default_material_print_temperature + 10
 prime_tower_enable = True
 speed_print = 45
diff --git a/resources/texts/change_log.txt b/resources/texts/change_log.txt
index cc4583c5e7..0f52a9fa22 100644
--- a/resources/texts/change_log.txt
+++ b/resources/texts/change_log.txt
@@ -13,18 +13,20 @@
 * Other new features and improvements:
 - Improved the Zseam behavior so Hide Seam is generated less randomly.
 - Fixed the order in which concentric top/bottom patterns are printed.
-- Replaced mentions of Ultimaker by UltiMaker to correctly reflect the merger
+- Replaced mentions of Ultimaker by UltiMaker to correctly reflect the merger.
 - Updated Load Project window with a new design.
 - Added tooling to automatically generate translation files to reduce the chance of human error. 
 - Added quality type to slice meta-data so it can be displayed in the Ultimaker Digital Factory.
 - Added a new way to update profiles by adding a Save/Compare Settings Button in custom window. 
-- Improved onboarding so t easier to add your first cloud printer or a non-UltiMaker printer.
+- Improved onboarding so it is easier to add your first cloud printer or a non-UltiMaker printer.
+- Included options to download .MSI and .PKG for easier software distribution. 
+- Smoothed some support generation, so support is generated less jittery.
+- Reduced unnecessary support generation for small overhang regions, like textures.
 - Improved support generation so the support doesn't fold around the model. 
-- Adjusted Support Horizontal Expansion and Minimum Support Area Settings for UltiMaker printers to improve support reliability. 
-- Added a Minimum Layer Time Temperature setting.
-- Added Brim Inside Avoid Margin setting, contributed by BagelOrb
-- Added settings for Support Interface Wall Line Count, Support Roof Line Count, and Support Floor Line Count.
 - Reduced stringing for Lift Head setting by removing the move in XY.
+- Added a Minimum Layer Time Temperature setting.
+- Added settings for Support Interface Wall Line Count, Support Roof Line Count, and Support Floor Line Count.
+- Added Brim Inside Avoid Margin setting, contributed by BagelOrb
 - Added prefix 'Printing' to post processing plugin script "DisplayFilenameAndLayerOnLCD" contributed by brunohenriquy
 - Added Enable, G-code Before, and G-code After To Filament Change, contributed by victornpb
 - Added support for per-object retraction settings, contributed by jeremysalwen
@@ -71,6 +73,8 @@
 - Fixed a bug where materials with longer names in Materials Preferences were harder to read, contributed by Ghostkeeper 
 
 * Printer definitions, profiles and materials:
+- Support Towers are working again and enabled by default for all printers.
+- Updated Support Horizontal Expansion, Support Join Distance, and Minimum Support Area Settings for UltiMaker printers to improve support reliability. 
 - Updated intent and quality files for UltiMaker printers to have more consistent file names. 
 - Updated default Support Interface Pattern to ZigZag for UltiMaker printers
 - Updated Maximum Combing Distance for UltiMaker printers
@@ -107,6 +111,7 @@
 
 * Community translations:
 - Updated French translations, contributed by xommit
+- Updated a typo in Japanese translations, contributed by tamorikawa
 
 * Known critical issues:
 - Under certain angles, the Interlocking Structures are not effective, yet.
diff --git a/resources/variants/ultimaker3_aa0.25.inst.cfg b/resources/variants/ultimaker3_aa0.25.inst.cfg
index 34c17f89a1..549c9b297b 100644
--- a/resources/variants/ultimaker3_aa0.25.inst.cfg
+++ b/resources/variants/ultimaker3_aa0.25.inst.cfg
@@ -16,7 +16,6 @@ machine_nozzle_heat_up_speed = 1.5
 machine_nozzle_id = AA 0.25
 machine_nozzle_size = 0.25
 machine_nozzle_tip_outer_diameter = 0.65
-material_initial_print_temperature = =material_print_temperature - 5
 retraction_min_travel = 0.7
 retraction_prime_speed = =retraction_speed
 skin_overlap = 15
diff --git a/resources/variants/ultimaker3_aa0.8.inst.cfg b/resources/variants/ultimaker3_aa0.8.inst.cfg
index 76bf22458b..3815d396cf 100644
--- a/resources/variants/ultimaker3_aa0.8.inst.cfg
+++ b/resources/variants/ultimaker3_aa0.8.inst.cfg
@@ -23,7 +23,6 @@ machine_nozzle_heat_up_speed = 1.5
 machine_nozzle_id = AA 0.8
 machine_nozzle_size = 0.8
 machine_nozzle_tip_outer_diameter = 2.0
-material_initial_print_temperature = =material_print_temperature - 5
 multiple_mesh_overlap = 0
 prime_tower_enable = False
 prime_tower_wipe_enabled = True
diff --git a/resources/variants/ultimaker3_extended_aa0.25.inst.cfg b/resources/variants/ultimaker3_extended_aa0.25.inst.cfg
index 295902ff74..8c487fae97 100644
--- a/resources/variants/ultimaker3_extended_aa0.25.inst.cfg
+++ b/resources/variants/ultimaker3_extended_aa0.25.inst.cfg
@@ -16,7 +16,6 @@ machine_nozzle_heat_up_speed = 1.5
 machine_nozzle_id = AA 0.25
 machine_nozzle_size = 0.25
 machine_nozzle_tip_outer_diameter = 0.65
-material_initial_print_temperature = =material_print_temperature - 5
 retraction_min_travel = 0.7
 retraction_prime_speed = =retraction_speed
 skin_overlap = 15
diff --git a/resources/variants/ultimaker3_extended_aa0.8.inst.cfg b/resources/variants/ultimaker3_extended_aa0.8.inst.cfg
index 749f16b373..2886c1feb8 100644
--- a/resources/variants/ultimaker3_extended_aa0.8.inst.cfg
+++ b/resources/variants/ultimaker3_extended_aa0.8.inst.cfg
@@ -23,7 +23,6 @@ machine_nozzle_heat_up_speed = 1.5
 machine_nozzle_id = AA 0.8
 machine_nozzle_size = 0.8
 machine_nozzle_tip_outer_diameter = 2.0
-material_initial_print_temperature = =material_print_temperature - 5
 multiple_mesh_overlap = 0
 prime_tower_enable = False
 prime_tower_wipe_enabled = True
diff --git a/resources/variants/ultimaker_s3_aa0.25.inst.cfg b/resources/variants/ultimaker_s3_aa0.25.inst.cfg
index 773f4cd6b3..e05faca500 100644
--- a/resources/variants/ultimaker_s3_aa0.25.inst.cfg
+++ b/resources/variants/ultimaker_s3_aa0.25.inst.cfg
@@ -16,7 +16,6 @@ machine_nozzle_heat_up_speed = 1.5
 machine_nozzle_id = AA 0.25
 machine_nozzle_size = 0.25
 machine_nozzle_tip_outer_diameter = 0.65
-material_initial_print_temperature = =material_print_temperature - 5
 retraction_min_travel = 0.7
 retraction_prime_speed = =retraction_speed
 skin_overlap = 15
diff --git a/resources/variants/ultimaker_s3_aa0.8.inst.cfg b/resources/variants/ultimaker_s3_aa0.8.inst.cfg
index 9df8ed7170..11f702f170 100644
--- a/resources/variants/ultimaker_s3_aa0.8.inst.cfg
+++ b/resources/variants/ultimaker_s3_aa0.8.inst.cfg
@@ -23,7 +23,6 @@ machine_nozzle_heat_up_speed = 1.5
 machine_nozzle_id = AA 0.8
 machine_nozzle_size = 0.8
 machine_nozzle_tip_outer_diameter = 2.0
-material_initial_print_temperature = =material_print_temperature - 5
 multiple_mesh_overlap = 0
 prime_tower_enable = False
 prime_tower_wipe_enabled = True
diff --git a/resources/variants/ultimaker_s5_aa0.25.inst.cfg b/resources/variants/ultimaker_s5_aa0.25.inst.cfg
index 8452eb0559..53bd6cf7df 100644
--- a/resources/variants/ultimaker_s5_aa0.25.inst.cfg
+++ b/resources/variants/ultimaker_s5_aa0.25.inst.cfg
@@ -16,7 +16,6 @@ machine_nozzle_heat_up_speed = 1.5
 machine_nozzle_id = AA 0.25
 machine_nozzle_size = 0.25
 machine_nozzle_tip_outer_diameter = 0.65
-material_initial_print_temperature = =material_print_temperature - 5
 retraction_min_travel = 0.7
 retraction_prime_speed = =retraction_speed
 skin_overlap = 15
diff --git a/resources/variants/ultimaker_s5_aa0.8.inst.cfg b/resources/variants/ultimaker_s5_aa0.8.inst.cfg
index c43caa0cb8..18e75b1521 100644
--- a/resources/variants/ultimaker_s5_aa0.8.inst.cfg
+++ b/resources/variants/ultimaker_s5_aa0.8.inst.cfg
@@ -23,7 +23,6 @@ machine_nozzle_heat_up_speed = 1.5
 machine_nozzle_id = AA 0.8
 machine_nozzle_size = 0.8
 machine_nozzle_tip_outer_diameter = 2.0
-material_initial_print_temperature = =material_print_temperature - 5
 multiple_mesh_overlap = 0
 prime_tower_enable = False
 prime_tower_wipe_enabled = True
diff --git a/resources/variants/ultimaker_s7_aa0.25.inst.cfg b/resources/variants/ultimaker_s7_aa0.25.inst.cfg
index 02920ddf8d..48e5937986 100644
--- a/resources/variants/ultimaker_s7_aa0.25.inst.cfg
+++ b/resources/variants/ultimaker_s7_aa0.25.inst.cfg
@@ -16,7 +16,6 @@ machine_nozzle_heat_up_speed = 1.5
 machine_nozzle_id = AA 0.25
 machine_nozzle_size = 0.25
 machine_nozzle_tip_outer_diameter = 0.65
-material_initial_print_temperature = =material_print_temperature - 5
 retraction_min_travel = 0.7
 retraction_prime_speed = =retraction_speed
 skin_overlap = 15
diff --git a/resources/variants/ultimaker_s7_aa0.8.inst.cfg b/resources/variants/ultimaker_s7_aa0.8.inst.cfg
index 96681e44dd..330cce8182 100644
--- a/resources/variants/ultimaker_s7_aa0.8.inst.cfg
+++ b/resources/variants/ultimaker_s7_aa0.8.inst.cfg
@@ -23,7 +23,6 @@ machine_nozzle_heat_up_speed = 1.5
 machine_nozzle_id = AA 0.8
 machine_nozzle_size = 0.8
 machine_nozzle_tip_outer_diameter = 2.0
-material_initial_print_temperature = =material_print_temperature - 5
 multiple_mesh_overlap = 0
 prime_tower_enable = False
 prime_tower_wipe_enabled = True