Applied printer-linter format

To make sure we have uniform diffs with our PR's

resources/quality/jgaurora_a6/jgaurora_a6_0.12_detail.inst.cfg

@@ -1,26 +1,27 @@
 [general]
-version = 4
-name = Detail 0.12
 definition = jgaurora_a6
+name = Detail 0.12
+version = 4
 
 [metadata]
-setting_version = 20
+global_quality = true
 quality_type = detail
+setting_version = 20
 type = quality
 weight = 0
-global_quality = true
 
 [values]
-layer_height = 0.12
-layer_height_0 = 0.2
-initial_layer_line_width_factor = 150
-infill_before_walls = true
-speed_print = 50
-speed_travel = 80
-retraction_amount = 4
 acceleration_enabled = True
 adhesion_type = skirt
+infill_before_walls = true
+initial_layer_line_width_factor = 150
 jerk_enabled = True
+layer_height = 0.12
+layer_height_0 = 0.2
+retraction_amount = 4
 retraction_combing = infill
+speed_print = 50
+speed_travel = 80
 support_enable = False
 travel_retract_before_outer_wall = True
+

resources/quality/jgaurora_a6/jgaurora_a6_0.16_optimal.inst.cfg

@@ -1,26 +1,27 @@
 [general]
-version = 4
-name = Optimal 0.16
 definition = jgaurora_a6
+name = Optimal 0.16
+version = 4
 
 [metadata]
+global_quality = true
 quality_type = optimal
 setting_version = 20
 type = quality
 weight = -1
-global_quality = true
 
 [values]
+acceleration_enabled = True
+adhesion_type = skirt
+infill_before_walls = true
+initial_layer_line_width_factor = 150
+jerk_enabled = True
 layer_height = 0.16
 layer_height_0 = 0.2
-initial_layer_line_width_factor = 150
-infill_before_walls = true
+retraction_amount = 4
+retraction_combing = infill
 speed_print = 55
 speed_travel = 80
-retraction_amount = 4
-adhesion_type = skirt
-acceleration_enabled = True
-jerk_enabled = True
-retraction_combing = infill
 support_enable = False
 travel_retract_before_outer_wall = True
+

resources/quality/jgaurora_a6/jgaurora_a6_0.24_draft.inst.cfg

@@ -1,21 +1,22 @@
 [general]
-version = 4
-name = Draft 0.24
 definition = jgaurora_a6
+name = Draft 0.24
+version = 4
 
 [metadata]
+global_quality = true
 quality_type = draft
 setting_version = 20
 type = quality
 weight = -3
-global_quality = true
 
 [values]
+adhesion_type = skirt
 layer_height = 0.24
 layer_height_0 = 0.24
-speed_print = 60
 retraction_amount = 4
-adhesion_type = skirt
 retraction_combing = infill
+speed_print = 60
 support_enable = False
 travel_retract_before_outer_wall = True
+

resources/quality/jgaurora_a6/jgaurora_a6_0.2_normal.inst.cfg

@@ -1,21 +1,22 @@
 [general]
-version = 4
-name = Normal 0.20
 definition = jgaurora_a6
+name = Normal 0.20
+version = 4
 
 [metadata]
+global_quality = true
 quality_type = normal
 setting_version = 20
 type = quality
 weight = -2
-global_quality = true
 
 [values]
+adhesion_type = skirt
 layer_height = 0.2
 layer_height_0 = 0.2
+retraction_combing = infill
 speed_print = 60
 speed_travel = 100
-adhesion_type = skirt
-retraction_combing = infill
 support_enable = False
 travel_retract_before_outer_wall = True
+