Applied printer-linter format

To make sure we have uniform diffs with our PR's

resources/quality/Leapfrog_Bolt_Pro/Leapfrog_Bolt_Pro_global_standard.inst.cfg

@@ -1,14 +1,15 @@
 [general]
-version = 4
-name = Standard
 definition = leapfrog_bolt_pro
+name = Standard
+version = 4
 
 [metadata]
+global_quality = True
+quality_type = standard
 setting_version = 20
 type = quality
-quality_type = standard
 weight = 0
-global_quality = True
 
 [values]
 layer_height = 0.15
+

resources/quality/Leapfrog_Bolt_Pro/abs/Leapfrog_Bolt_Pro_brass0.4_abs_natural_standard.inst.cfg

@@ -1,100 +1,92 @@
 [general]
-version = 4
-name = Standard
 definition = leapfrog_bolt_pro
+name = Standard
+version = 4
 
 [metadata]
+material = leapfrog_abs_natural
+quality_type = standard
 setting_version = 20
 type = quality
-quality_type = standard
-weight = 0
-material = leapfrog_abs_natural
 variant = Brass 0.4
+weight = 0
 
 [values]
-layer_height_0 = 0.3
-line_width = 0.4
-initial_layer_line_width_factor = 120
-
-wall_thickness = 0.8
-wall_0_wipe_dist = 0.2
-top_bottom_thickness = 0.8
-top_bottom_pattern = lines
-optimize_wall_printing_order = True
-z_seam_type = sharpest_corner
-z_seam_corner = hide_seam
-skin_outline_count = 1
-
-infill_sparse_density = 20
-infill_pattern = grid
-connect_infill_polygons = True
-infill_overlap = 0
-infill_wipe_dist = 0
-infill_before_walls = True
-min_infill_area = 0
-
-retraction_enable = True
-retract_at_layer_change = False
-retraction_amount = 2
-retraction_speed = 25
-switch_extruder_retraction_amount = 15
-switch_extruder_retraction_speeds = 20
-
-speed_print = 35
-speed_wall = 25
-speed_wall_0 = 25
-speed_wall_x = 35
-speed_topbottom = 25	
-speed_travel = 200
-speed_layer_0 = 25
-speed_support = 40
-speed_travel_layer_0 = 45
-speed_slowdown_layers = 1
-
-retraction_combing = all
-travel_avoid_other_parts = True
-travel_avoid_supports = True
-retraction_hop_enabled = True
-retraction_hop_only_when_collides = True
-retraction_hop = 2
-retraction_hop_after_extruder_switch = True
-retraction_hop_after_extruder_switch_height = 2
-
-cool_fan_enabled = True
-cool_fan_speed = 30
-cool_fan_speed_min = 0
-cool_fan_speed_max = 30
-cool_min_layer_time_fan_speed_max = 5
-cool_fan_speed_0 = 0
-cool_fan_full_at_height = 0.5
-cool_fan_full_layer = 3
-cool_min_layer_time = 5
-cool_min_speed = 10
-
-support_interface_enable = False
-support_angle = 50
-support_pattern = zigzag
-support_connect_zigzags = False
-support_infill_rate = 20
-support_z_distance = 0.3
-support_xy_distance = 0.7
-support_xy_distance_overhang = 0.4
-support_bottom_stair_step_height = 0.3
-support_bottom_stair_step_width = 5
-support_join_distance = 2
-support_tower_diameter = 3
-support_tower_roof_angle = 65
-
 adhesion_type = brim
-brim_width = 8
 brim_line_count = 14
 brim_outside_only = True
-skirt_brim_minimal_length = 250
-
+brim_width = 8
+connect_infill_polygons = True
+cool_fan_enabled = True
+cool_fan_full_at_height = 0.5
+cool_fan_full_layer = 3
+cool_fan_speed = 30
+cool_fan_speed_0 = 0
+cool_fan_speed_max = 30
+cool_fan_speed_min = 0
+cool_min_layer_time = 5
+cool_min_layer_time_fan_speed_max = 5
+cool_min_speed = 10
+infill_before_walls = True
+infill_overlap = 0
+infill_pattern = grid
+infill_sparse_density = 20
+infill_wipe_dist = 0
+initial_layer_line_width_factor = 120
+layer_height_0 = 0.3
+line_width = 0.4
+min_infill_area = 0
+optimize_wall_printing_order = True
+prime_tower_brim_enable = True
 prime_tower_enable = True
-prime_tower_size = 20
 prime_tower_min_volume = 6
 prime_tower_position_x = 169
 prime_tower_position_y = 25
+prime_tower_size = 20
 prime_tower_wipe_enabled = True
-prime_tower_brim_enable = True
+retract_at_layer_change = False
+retraction_amount = 2
+retraction_combing = all
+retraction_enable = True
+retraction_hop = 2
+retraction_hop_after_extruder_switch = True
+retraction_hop_after_extruder_switch_height = 2
+retraction_hop_enabled = True
+retraction_hop_only_when_collides = True
+retraction_speed = 25
+skin_outline_count = 1
+skirt_brim_minimal_length = 250
+speed_layer_0 = 25
+speed_print = 35
+speed_slowdown_layers = 1
+speed_support = 40
+speed_topbottom = 25
+speed_travel = 200
+speed_travel_layer_0 = 45
+speed_wall = 25
+speed_wall_0 = 25
+speed_wall_x = 35
+support_angle = 50
+support_bottom_stair_step_height = 0.3
+support_bottom_stair_step_width = 5
+support_connect_zigzags = False
+support_infill_rate = 20
+support_interface_enable = False
+support_join_distance = 2
+support_pattern = zigzag
+support_tower_diameter = 3
+support_tower_roof_angle = 65
+support_xy_distance = 0.7
+support_xy_distance_overhang = 0.4
+support_z_distance = 0.3
+switch_extruder_retraction_amount = 15
+switch_extruder_retraction_speeds = 20
+top_bottom_pattern = lines
+top_bottom_thickness = 0.8
+travel_avoid_other_parts = True
+travel_avoid_supports = True
+wall_0_wipe_dist = 0.2
+wall_thickness = 0.8
+z_seam_corner = hide_seam
+z_seam_type = sharpest_corner
+

resources/quality/Leapfrog_Bolt_Pro/abs/Leapfrog_Bolt_Pro_nozzlex0.4_abs_natural_standard.inst.cfg

@@ -1,100 +1,92 @@
 [general]
-version = 4
-name = Standard
 definition = leapfrog_bolt_pro
+name = Standard
+version = 4
 
 [metadata]
+material = leapfrog_abs_natural
+quality_type = standard
 setting_version = 20
 type = quality
-quality_type = standard
-weight = 0
-material = leapfrog_abs_natural
 variant = NozzleX 0.4
+weight = 0
 
 [values]
-layer_height_0 = 0.3
-line_width = 0.4
-initial_layer_line_width_factor = 120
-
-wall_thickness = 0.8
-wall_0_wipe_dist = 0.2
-top_bottom_thickness = 0.8
-top_bottom_pattern = lines
-optimize_wall_printing_order = True
-z_seam_type = sharpest_corner
-z_seam_corner = hide_seam
-skin_outline_count = 1
-
-infill_sparse_density = 20
-infill_pattern = grid
-connect_infill_polygons = True
-infill_overlap = 0
-infill_wipe_dist = 0
-infill_before_walls = True
-min_infill_area = 0
-
-retraction_enable = True
-retract_at_layer_change = False
-retraction_amount = 2
-retraction_speed = 25
-switch_extruder_retraction_amount = 15
-switch_extruder_retraction_speeds = 20
-
-speed_print = 35
-speed_wall = 25
-speed_wall_0 = 25
-speed_wall_x = 35
-speed_topbottom = 25	
-speed_travel = 200
-speed_layer_0 = 25
-speed_support = 40
-speed_travel_layer_0 = 45
-speed_slowdown_layers = 1
-
-retraction_combing = all
-travel_avoid_other_parts = True
-travel_avoid_supports = True
-retraction_hop_enabled = True
-retraction_hop_only_when_collides = True
-retraction_hop = 2
-retraction_hop_after_extruder_switch = True
-retraction_hop_after_extruder_switch_height = 2
-
-cool_fan_enabled = True
-cool_fan_speed = 30
-cool_fan_speed_min = 0
-cool_fan_speed_max = 30
-cool_min_layer_time_fan_speed_max = 5
-cool_fan_speed_0 = 0
-cool_fan_full_at_height = 0.5
-cool_fan_full_layer = 3
-cool_min_layer_time = 5
-cool_min_speed = 10
-
-support_interface_enable = False
-support_angle = 50
-support_pattern = zigzag
-support_connect_zigzags = False
-support_infill_rate = 20
-support_z_distance = 0.3
-support_xy_distance = 0.7
-support_xy_distance_overhang = 0.4
-support_bottom_stair_step_height = 0.3
-support_bottom_stair_step_width = 5
-support_join_distance = 2
-support_tower_diameter = 3
-support_tower_roof_angle = 65
-
 adhesion_type = brim
-brim_width = 8
 brim_line_count = 14
 brim_outside_only = True
-skirt_brim_minimal_length = 250
-
+brim_width = 8
+connect_infill_polygons = True
+cool_fan_enabled = True
+cool_fan_full_at_height = 0.5
+cool_fan_full_layer = 3
+cool_fan_speed = 30
+cool_fan_speed_0 = 0
+cool_fan_speed_max = 30
+cool_fan_speed_min = 0
+cool_min_layer_time = 5
+cool_min_layer_time_fan_speed_max = 5
+cool_min_speed = 10
+infill_before_walls = True
+infill_overlap = 0
+infill_pattern = grid
+infill_sparse_density = 20
+infill_wipe_dist = 0
+initial_layer_line_width_factor = 120
+layer_height_0 = 0.3
+line_width = 0.4
+min_infill_area = 0
+optimize_wall_printing_order = True
+prime_tower_brim_enable = True
 prime_tower_enable = True
-prime_tower_size = 20
 prime_tower_min_volume = 6
 prime_tower_position_x = 169
 prime_tower_position_y = 25
+prime_tower_size = 20
 prime_tower_wipe_enabled = True
-prime_tower_brim_enable = True
+retract_at_layer_change = False
+retraction_amount = 2
+retraction_combing = all
+retraction_enable = True
+retraction_hop = 2
+retraction_hop_after_extruder_switch = True
+retraction_hop_after_extruder_switch_height = 2
+retraction_hop_enabled = True
+retraction_hop_only_when_collides = True
+retraction_speed = 25
+skin_outline_count = 1
+skirt_brim_minimal_length = 250
+speed_layer_0 = 25
+speed_print = 35
+speed_slowdown_layers = 1
+speed_support = 40
+speed_topbottom = 25
+speed_travel = 200
+speed_travel_layer_0 = 45
+speed_wall = 25
+speed_wall_0 = 25
+speed_wall_x = 35
+support_angle = 50
+support_bottom_stair_step_height = 0.3
+support_bottom_stair_step_width = 5
+support_connect_zigzags = False
+support_infill_rate = 20
+support_interface_enable = False
+support_join_distance = 2
+support_pattern = zigzag
+support_tower_diameter = 3
+support_tower_roof_angle = 65
+support_xy_distance = 0.7
+support_xy_distance_overhang = 0.4
+support_z_distance = 0.3
+switch_extruder_retraction_amount = 15
+switch_extruder_retraction_speeds = 20
+top_bottom_pattern = lines
+top_bottom_thickness = 0.8
+travel_avoid_other_parts = True
+travel_avoid_supports = True
+wall_0_wipe_dist = 0.2
+wall_thickness = 0.8
+z_seam_corner = hide_seam
+z_seam_type = sharpest_corner
+

resources/quality/Leapfrog_Bolt_Pro/epla/Leapfrog_Bolt_Pro_brass0.4_epla_natural_standard.inst.cfg

@@ -1,100 +1,92 @@
 [general]
-version = 4
-name = Standard
 definition = leapfrog_bolt_pro
+name = Standard
+version = 4
 
 [metadata]
+material = leapfrog_epla_natural
+quality_type = standard
 setting_version = 20
 type = quality
-quality_type = standard
-weight = 0
-material = leapfrog_epla_natural
 variant = Brass 0.4
+weight = 0
 
 [values]
-layer_height_0 = 0.3
-line_width = 0.4
-initial_layer_line_width_factor = 120
-
-wall_thickness = 0.8
-wall_0_wipe_dist = 0.2
-top_bottom_thickness = 0.8
-top_bottom_pattern = lines
-optimize_wall_printing_order = True
-z_seam_type = sharpest_corner
-z_seam_corner = hide_seam
-skin_outline_count = 1
-
-infill_sparse_density = 20
-infill_pattern = grid
-connect_infill_polygons = True
-infill_overlap = 0
-infill_wipe_dist = 0
-infill_before_walls = True
-min_infill_area = 0
-
-retraction_enable = True
-retract_at_layer_change = False
-retraction_amount = 2
-retraction_speed = 25
-switch_extruder_retraction_amount = 15
-switch_extruder_retraction_speeds = 20
-
-speed_print = 50
-speed_wall = 25
-speed_wall_0 = 25
-speed_wall_x = 40
-speed_topbottom = 25	
-speed_travel = 200
-speed_layer_0 = 25
-speed_support = 50
-speed_travel_layer_0 = 45
-speed_slowdown_layers = 1
 acceleration_enabled = False
-
-retraction_combing = all
-travel_avoid_other_parts = True
-travel_avoid_supports = True
-retraction_hop_enabled = False
-retraction_hop_only_when_collides = True
-retraction_hop = 2
-retraction_hop_after_extruder_switch = True
-retraction_hop_after_extruder_switch_height = 2
-
+adhesion_type = skirt
+connect_infill_polygons = True
 cool_fan_enabled = True
-cool_fan_speed = 100
-cool_fan_speed_min = 100
-cool_fan_speed_max = 100
-cool_min_layer_time_fan_speed_max = 5
-cool_fan_speed_0 = 0
 cool_fan_full_at_height = 0.5
 cool_fan_full_layer = 4
+cool_fan_speed = 100
+cool_fan_speed_0 = 0
+cool_fan_speed_max = 100
+cool_fan_speed_min = 100
 cool_min_layer_time = 5
+cool_min_layer_time_fan_speed_max = 5
 cool_min_speed = 5
-
-support_interface_enable = False
-support_angle = 50
-support_pattern = zigzag
-support_connect_zigzags = False
-support_infill_rate = 20
-support_z_distance = 0.3
-support_xy_distance = 0.7
-support_xy_distance_overhang = 0.4
-support_bottom_stair_step_height = 0.3
-support_bottom_stair_step_width = 5
-support_join_distance = 2
-support_tower_diameter = 3
-support_tower_roof_angle = 65
-
-adhesion_type = skirt
-skirt_line_count = 3
-skirt_gap = 1
-skirt_brim_minimal_length = 250
-
+infill_before_walls = True
+infill_overlap = 0
+infill_pattern = grid
+infill_sparse_density = 20
+infill_wipe_dist = 0
+initial_layer_line_width_factor = 120
+layer_height_0 = 0.3
+line_width = 0.4
+min_infill_area = 0
+optimize_wall_printing_order = True
+prime_tower_brim_enable = True
 prime_tower_enable = True
-prime_tower_size = 20
 prime_tower_min_volume = 6
 prime_tower_position_x = 169
 prime_tower_position_y = 25
+prime_tower_size = 20
 prime_tower_wipe_enabled = True
-prime_tower_brim_enable = True
+retract_at_layer_change = False
+retraction_amount = 2
+retraction_combing = all
+retraction_enable = True
+retraction_hop = 2
+retraction_hop_after_extruder_switch = True
+retraction_hop_after_extruder_switch_height = 2
+retraction_hop_enabled = False
+retraction_hop_only_when_collides = True
+retraction_speed = 25
+skin_outline_count = 1
+skirt_brim_minimal_length = 250
+skirt_gap = 1
+skirt_line_count = 3
+speed_layer_0 = 25
+speed_print = 50
+speed_slowdown_layers = 1
+speed_support = 50
+speed_topbottom = 25
+speed_travel = 200
+speed_travel_layer_0 = 45
+speed_wall = 25
+speed_wall_0 = 25
+speed_wall_x = 40
+support_angle = 50
+support_bottom_stair_step_height = 0.3
+support_bottom_stair_step_width = 5
+support_connect_zigzags = False
+support_infill_rate = 20
+support_interface_enable = False
+support_join_distance = 2
+support_pattern = zigzag
+support_tower_diameter = 3
+support_tower_roof_angle = 65
+support_xy_distance = 0.7
+support_xy_distance_overhang = 0.4
+support_z_distance = 0.3
+switch_extruder_retraction_amount = 15
+switch_extruder_retraction_speeds = 20
+top_bottom_pattern = lines
+top_bottom_thickness = 0.8
+travel_avoid_other_parts = True
+travel_avoid_supports = True
+wall_0_wipe_dist = 0.2
+wall_thickness = 0.8
+z_seam_corner = hide_seam
+z_seam_type = sharpest_corner
+

resources/quality/Leapfrog_Bolt_Pro/epla/Leapfrog_Bolt_Pro_nozzlex0.4_epla_natural_standard.inst.cfg

@@ -1,100 +1,92 @@
 [general]
-version = 4
-name = Standard
 definition = leapfrog_bolt_pro
+name = Standard
+version = 4
 
 [metadata]
+material = leapfrog_epla_natural
+quality_type = standard
 setting_version = 20
 type = quality
-quality_type = standard
-weight = 0
-material = leapfrog_epla_natural
 variant = NozzleX 0.4
+weight = 0
 
 [values]
-layer_height_0 = 0.3
-line_width = 0.4
-initial_layer_line_width_factor = 120
-
-wall_thickness = 0.8
-wall_0_wipe_dist = 0.2
-top_bottom_thickness = 0.8
-top_bottom_pattern = lines
-optimize_wall_printing_order = True
-z_seam_type = sharpest_corner
-z_seam_corner = hide_seam
-skin_outline_count = 1
-
-infill_sparse_density = 20
-infill_pattern = grid
-connect_infill_polygons = True
-infill_overlap = 0
-infill_wipe_dist = 0
-infill_before_walls = True
-min_infill_area = 0
-
-retraction_enable = True
-retract_at_layer_change = False
-retraction_amount = 2
-retraction_speed = 25
-switch_extruder_retraction_amount = 15
-switch_extruder_retraction_speeds = 20
-
-speed_print = 50
-speed_wall = 25
-speed_wall_0 = 25
-speed_wall_x = 40
-speed_topbottom = 25	
-speed_travel = 200
-speed_layer_0 = 25
-speed_support = 50
-speed_travel_layer_0 = 45
-speed_slowdown_layers = 1
 acceleration_enabled = False
-
-retraction_combing = all
-travel_avoid_other_parts = True
-travel_avoid_supports = True
-retraction_hop_enabled = False
-retraction_hop_only_when_collides = True
-retraction_hop = 2
-retraction_hop_after_extruder_switch = True
-retraction_hop_after_extruder_switch_height = 2
-
+adhesion_type = skirt
+connect_infill_polygons = True
 cool_fan_enabled = True
-cool_fan_speed = 100
-cool_fan_speed_min = 100
-cool_fan_speed_max = 100
-cool_min_layer_time_fan_speed_max = 5
-cool_fan_speed_0 = 0
 cool_fan_full_at_height = 0.5
 cool_fan_full_layer = 4
+cool_fan_speed = 100
+cool_fan_speed_0 = 0
+cool_fan_speed_max = 100
+cool_fan_speed_min = 100
 cool_min_layer_time = 5
+cool_min_layer_time_fan_speed_max = 5
 cool_min_speed = 5
-
-support_interface_enable = False
-support_angle = 50
-support_pattern = zigzag
-support_connect_zigzags = False
-support_infill_rate = 20
-support_z_distance = 0.3
-support_xy_distance = 0.7
-support_xy_distance_overhang = 0.4
-support_bottom_stair_step_height = 0.3
-support_bottom_stair_step_width = 5
-support_join_distance = 2
-support_tower_diameter = 3
-support_tower_roof_angle = 65
-
-adhesion_type = skirt
-skirt_line_count = 3
-skirt_gap = 1
-skirt_brim_minimal_length = 250
-
+infill_before_walls = True
+infill_overlap = 0
+infill_pattern = grid
+infill_sparse_density = 20
+infill_wipe_dist = 0
+initial_layer_line_width_factor = 120
+layer_height_0 = 0.3
+line_width = 0.4
+min_infill_area = 0
+optimize_wall_printing_order = True
+prime_tower_brim_enable = True
 prime_tower_enable = True
-prime_tower_size = 20
 prime_tower_min_volume = 6
 prime_tower_position_x = 169
 prime_tower_position_y = 25
+prime_tower_size = 20
 prime_tower_wipe_enabled = True
-prime_tower_brim_enable = True
+retract_at_layer_change = False
+retraction_amount = 2
+retraction_combing = all
+retraction_enable = True
+retraction_hop = 2
+retraction_hop_after_extruder_switch = True
+retraction_hop_after_extruder_switch_height = 2
+retraction_hop_enabled = False
+retraction_hop_only_when_collides = True
+retraction_speed = 25
+skin_outline_count = 1
+skirt_brim_minimal_length = 250
+skirt_gap = 1
+skirt_line_count = 3
+speed_layer_0 = 25
+speed_print = 50
+speed_slowdown_layers = 1
+speed_support = 50
+speed_topbottom = 25
+speed_travel = 200
+speed_travel_layer_0 = 45
+speed_wall = 25
+speed_wall_0 = 25
+speed_wall_x = 40
+support_angle = 50
+support_bottom_stair_step_height = 0.3
+support_bottom_stair_step_width = 5
+support_connect_zigzags = False
+support_infill_rate = 20
+support_interface_enable = False
+support_join_distance = 2
+support_pattern = zigzag
+support_tower_diameter = 3
+support_tower_roof_angle = 65
+support_xy_distance = 0.7
+support_xy_distance_overhang = 0.4
+support_z_distance = 0.3
+switch_extruder_retraction_amount = 15
+switch_extruder_retraction_speeds = 20
+top_bottom_pattern = lines
+top_bottom_thickness = 0.8
+travel_avoid_other_parts = True
+travel_avoid_supports = True
+wall_0_wipe_dist = 0.2
+wall_thickness = 0.8
+z_seam_corner = hide_seam
+z_seam_type = sharpest_corner
+

resources/quality/Leapfrog_Bolt_Pro/pva/Leapfrog_Bolt_Pro_brass0.4_pva_natural_standard.inst.cfg

@@ -1,97 +1,88 @@
 [general]
-version = 4
-name = Standard
 definition = leapfrog_bolt_pro
+name = Standard
+version = 4
 
 [metadata]
+material = leapfrog_pva_natural
+quality_type = standard
 setting_version = 20
 type = quality
-quality_type = standard
-weight = 0
-material = leapfrog_pva_natural
 variant = Brass 0.4
+weight = 0
 
 [values]
-layer_height_0 = 0.3
-line_width = 0.4
-initial_layer_line_width_factor = 120
-
-wall_thickness = 0.8
-wall_0_wipe_dist = 0.2
-top_bottom_thickness = 0.8
-top_bottom_pattern = lines
-optimize_wall_printing_order = True
-z_seam_type = sharpest_corner
-z_seam_corner = hide_seam
-skin_outline_count = 1
-
-infill_sparse_density = 20
-infill_pattern = grid
+adhesion_type = skirt
 connect_infill_polygons = True
-infill_overlap = 0
-infill_wipe_dist = 0
-infill_before_walls = True
-min_infill_area = 0
-
-retraction_enable = True
-retract_at_layer_change = False
-retraction_amount = 2
-retraction_speed = 25
-switch_extruder_retraction_amount = 15
-switch_extruder_retraction_speeds = 20
-
-speed_print = 50
-speed_wall = 20
-speed_wall_0 = 20
-speed_wall_x = 20
-speed_topbottom = 25	
-speed_travel = 200
-speed_layer_0 = 25
-speed_support = 40
-speed_travel_layer_0 = 45
-speed_slowdown_layers = 1
-
-retraction_combing = all
-travel_avoid_other_parts = True
-travel_avoid_supports = True
-retraction_hop_enabled = False
-
-retraction_hop_after_extruder_switch_height = 2
-
 cool_fan_enabled = True
-cool_fan_speed = 100
-cool_fan_speed_min = 100
-cool_fan_speed_max = 100
-cool_min_layer_time_fan_speed_max = 5
-cool_fan_speed_0 = 0
 cool_fan_full_at_height = 0.5
 cool_fan_full_layer = 4
+cool_fan_speed = 100
+cool_fan_speed_0 = 0
+cool_fan_speed_max = 100
+cool_fan_speed_min = 100
 cool_min_layer_time = 5
+cool_min_layer_time_fan_speed_max = 5
 cool_min_speed = 5
-
-support_interface_enable = False
-support_angle = 50
-support_pattern = zigzag
-support_connect_zigzags = False
-support_infill_rate = 20
-support_z_distance = 0.3
-support_xy_distance = 0.7
-support_xy_distance_overhang = 0.4
-support_bottom_stair_step_height = 0.3
-support_bottom_stair_step_width = 5
-support_join_distance = 2
-support_tower_diameter = 3
-support_tower_roof_angle = 65
-
-adhesion_type = skirt
-skirt_line_count = 3
-skirt_gap = 1
-skirt_brim_minimal_length = 250
-
+infill_before_walls = True
+infill_overlap = 0
+infill_pattern = grid
+infill_sparse_density = 20
+infill_wipe_dist = 0
+initial_layer_line_width_factor = 120
+layer_height_0 = 0.3
+line_width = 0.4
+min_infill_area = 0
+optimize_wall_printing_order = True
+prime_tower_brim_enable = True
 prime_tower_enable = True
-prime_tower_size = 20
 prime_tower_min_volume = 6
 prime_tower_position_x = 169
 prime_tower_position_y = 25
+prime_tower_size = 20
 prime_tower_wipe_enabled = True
-prime_tower_brim_enable = True
+retract_at_layer_change = False
+retraction_amount = 2
+retraction_combing = all
+retraction_enable = True
+retraction_hop_after_extruder_switch_height = 2
+retraction_hop_enabled = False
+retraction_speed = 25
+skin_outline_count = 1
+skirt_brim_minimal_length = 250
+skirt_gap = 1
+skirt_line_count = 3
+speed_layer_0 = 25
+speed_print = 50
+speed_slowdown_layers = 1
+speed_support = 40
+speed_topbottom = 25
+speed_travel = 200
+speed_travel_layer_0 = 45
+speed_wall = 20
+speed_wall_0 = 20
+speed_wall_x = 20
+support_angle = 50
+support_bottom_stair_step_height = 0.3
+support_bottom_stair_step_width = 5
+support_connect_zigzags = False
+support_infill_rate = 20
+support_interface_enable = False
+support_join_distance = 2
+support_pattern = zigzag
+support_tower_diameter = 3
+support_tower_roof_angle = 65
+support_xy_distance = 0.7
+support_xy_distance_overhang = 0.4
+support_z_distance = 0.3
+switch_extruder_retraction_amount = 15
+switch_extruder_retraction_speeds = 20
+top_bottom_pattern = lines
+top_bottom_thickness = 0.8
+travel_avoid_other_parts = True
+travel_avoid_supports = True
+wall_0_wipe_dist = 0.2
+wall_thickness = 0.8
+z_seam_corner = hide_seam
+z_seam_type = sharpest_corner
+

resources/quality/Leapfrog_Bolt_Pro/pva/Leapfrog_Bolt_Pro_nozzlex0.4_pva_natural_standard.inst.cfg

@@ -1,97 +1,88 @@
 [general]
-version = 4
-name = Standard
 definition = leapfrog_bolt_pro
+name = Standard
+version = 4
 
 [metadata]
+material = leapfrog_pva_natural
+quality_type = standard
 setting_version = 20
 type = quality
-quality_type = standard
-weight = 0
-material = leapfrog_pva_natural
 variant = NozzleX 0.4
+weight = 0
 
 [values]
-layer_height_0 = 0.3
-line_width = 0.4
-initial_layer_line_width_factor = 120
-
-wall_thickness = 0.8
-wall_0_wipe_dist = 0.2
-top_bottom_thickness = 0.8
-top_bottom_pattern = lines
-optimize_wall_printing_order = True
-z_seam_type = sharpest_corner
-z_seam_corner = hide_seam
-skin_outline_count = 1
-
-infill_sparse_density = 20
-infill_pattern = grid
+adhesion_type = skirt
 connect_infill_polygons = True
-infill_overlap = 0
-infill_wipe_dist = 0
-infill_before_walls = True
-min_infill_area = 0
-
-retraction_enable = True
-retract_at_layer_change = False
-retraction_amount = 2
-retraction_speed = 25
-switch_extruder_retraction_amount = 15
-switch_extruder_retraction_speeds = 20
-
-speed_print = 50
-speed_wall = 20
-speed_wall_0 = 20
-speed_wall_x = 20
-speed_topbottom = 25	
-speed_travel = 200
-speed_layer_0 = 25
-speed_support = 40
-speed_travel_layer_0 = 45
-speed_slowdown_layers = 1
-
-retraction_combing = all
-travel_avoid_other_parts = True
-travel_avoid_supports = True
-retraction_hop_enabled = False
-
-retraction_hop_after_extruder_switch_height = 2
-
 cool_fan_enabled = True
-cool_fan_speed = 100
-cool_fan_speed_min = 100
-cool_fan_speed_max = 100
-cool_min_layer_time_fan_speed_max = 5
-cool_fan_speed_0 = 0
 cool_fan_full_at_height = 0.5
 cool_fan_full_layer = 4
+cool_fan_speed = 100
+cool_fan_speed_0 = 0
+cool_fan_speed_max = 100
+cool_fan_speed_min = 100
 cool_min_layer_time = 5
+cool_min_layer_time_fan_speed_max = 5
 cool_min_speed = 5
-
-support_interface_enable = False
-support_angle = 50
-support_pattern = zigzag
-support_connect_zigzags = False
-support_infill_rate = 20
-support_z_distance = 0.3
-support_xy_distance = 0.7
-support_xy_distance_overhang = 0.4
-support_bottom_stair_step_height = 0.3
-support_bottom_stair_step_width = 5
-support_join_distance = 2
-support_tower_diameter = 3
-support_tower_roof_angle = 65
-
-adhesion_type = skirt
-skirt_line_count = 3
-skirt_gap = 1
-skirt_brim_minimal_length = 250
-
+infill_before_walls = True
+infill_overlap = 0
+infill_pattern = grid
+infill_sparse_density = 20
+infill_wipe_dist = 0
+initial_layer_line_width_factor = 120
+layer_height_0 = 0.3
+line_width = 0.4
+min_infill_area = 0
+optimize_wall_printing_order = True
+prime_tower_brim_enable = True
 prime_tower_enable = True
-prime_tower_size = 20
 prime_tower_min_volume = 6
 prime_tower_position_x = 169
 prime_tower_position_y = 25
+prime_tower_size = 20
 prime_tower_wipe_enabled = True
-prime_tower_brim_enable = True
+retract_at_layer_change = False
+retraction_amount = 2
+retraction_combing = all
+retraction_enable = True
+retraction_hop_after_extruder_switch_height = 2
+retraction_hop_enabled = False
+retraction_speed = 25
+skin_outline_count = 1
+skirt_brim_minimal_length = 250
+skirt_gap = 1
+skirt_line_count = 3
+speed_layer_0 = 25
+speed_print = 50
+speed_slowdown_layers = 1
+speed_support = 40
+speed_topbottom = 25
+speed_travel = 200
+speed_travel_layer_0 = 45
+speed_wall = 20
+speed_wall_0 = 20
+speed_wall_x = 20
+support_angle = 50
+support_bottom_stair_step_height = 0.3
+support_bottom_stair_step_width = 5
+support_connect_zigzags = False
+support_infill_rate = 20
+support_interface_enable = False
+support_join_distance = 2
+support_pattern = zigzag
+support_tower_diameter = 3
+support_tower_roof_angle = 65
+support_xy_distance = 0.7
+support_xy_distance_overhang = 0.4
+support_z_distance = 0.3
+switch_extruder_retraction_amount = 15
+switch_extruder_retraction_speeds = 20
+top_bottom_pattern = lines
+top_bottom_thickness = 0.8
+travel_avoid_other_parts = True
+travel_avoid_supports = True
+wall_0_wipe_dist = 0.2
+wall_thickness = 0.8
+z_seam_corner = hide_seam
+z_seam_type = sharpest_corner
+

resources/quality/abax_pri3/apri3_pla_fast.inst.cfg

@@ -1,21 +1,22 @@
 [general]
-version = 4
-name = Fine
 definition = abax_pri3
+name = Fine
+version = 4
 
 [metadata]
+material = generic_pla
+quality_type = normal
 setting_version = 20
 type = quality
-quality_type = normal
 weight = 0
-material = generic_pla
 
 [values]
-wall_thickness = 1.05
-top_bottom_thickness = 0.8
-infill_sparse_density = 20
-speed_print = 80
-speed_layer_0 = =round(speed_print * 30 / 50)
-speed_topbottom = =math.ceil(speed_print * 20 / 80)
 cool_min_layer_time = 5
 cool_min_speed = 10
+infill_sparse_density = 20
+speed_layer_0 = =round(speed_print * 30 / 50)
+speed_print = 80
+speed_topbottom = =math.ceil(speed_print * 20 / 80)
+top_bottom_thickness = 0.8
+wall_thickness = 1.05
+

resources/quality/abax_pri3/apri3_pla_high.inst.cfg

@@ -1,21 +1,22 @@
 [general]
-version = 4
-name = Extra Fine
 definition = abax_pri3
+name = Extra Fine
+version = 4
 
 [metadata]
+material = generic_pla
+quality_type = high
 setting_version = 20
 type = quality
-quality_type = high
 weight = 1
-material = generic_pla
 
 [values]
-wall_thickness = 1.05
-top_bottom_thickness = 0.8
-infill_sparse_density = 20
-speed_print = 50
-speed_layer_0 = =round(speed_print * 30 / 50)
-speed_topbottom = =math.ceil(speed_print * 20 / 50)
 cool_min_layer_time = 5
 cool_min_speed = 10
+infill_sparse_density = 20
+speed_layer_0 = =round(speed_print * 30 / 50)
+speed_print = 50
+speed_topbottom = =math.ceil(speed_print * 20 / 50)
+top_bottom_thickness = 0.8
+wall_thickness = 1.05
+

resources/quality/abax_pri3/apri3_pla_normal.inst.cfg

@@ -1,21 +1,22 @@
 [general]
-version = 4
-name = Fine
 definition = abax_pri3
+name = Fine
+version = 4
 
 [metadata]
+material = generic_pla
+quality_type = normal
 setting_version = 20
 type = quality
-quality_type = normal
 weight = 0
-material = generic_pla
 
 [values]
-wall_thickness = 1.05
-top_bottom_thickness = 0.8
-infill_sparse_density = 20
-speed_print = 50
-speed_layer_0 = =round(speed_print * 30 / 50)
-speed_topbottom = =math.ceil(speed_print * 20 / 50)
 cool_min_layer_time = 5
 cool_min_speed = 10
+infill_sparse_density = 20
+speed_layer_0 = =round(speed_print * 30 / 50)
+speed_print = 50
+speed_topbottom = =math.ceil(speed_print * 20 / 50)
+top_bottom_thickness = 0.8
+wall_thickness = 1.05
+

resources/quality/abax_pri5/apri5_pla_fast.inst.cfg

@@ -1,21 +1,22 @@
 [general]
-version = 4
-name = Fine
 definition = abax_pri5
+name = Fine
+version = 4
 
 [metadata]
+material = generic_pla
+quality_type = normal
 setting_version = 20
 type = quality
-quality_type = normal
 weight = 0
-material = generic_pla
 
 [values]
-wall_thickness = 1.05
-top_bottom_thickness = 0.8
-infill_sparse_density = 20
-speed_print = 80
-speed_layer_0 = =round(speed_print * 30 / 50)
-speed_topbottom = =math.ceil(speed_print * 20 / 80)
 cool_min_layer_time = 5
 cool_min_speed = 10
+infill_sparse_density = 20
+speed_layer_0 = =round(speed_print * 30 / 50)
+speed_print = 80
+speed_topbottom = =math.ceil(speed_print * 20 / 80)
+top_bottom_thickness = 0.8
+wall_thickness = 1.05
+

resources/quality/abax_pri5/apri5_pla_high.inst.cfg

@@ -1,21 +1,22 @@
 [general]
-version = 4
-name = Extra Fine
 definition = abax_pri5
+name = Extra Fine
+version = 4
 
 [metadata]
+material = generic_pla
+quality_type = high
 setting_version = 20
 type = quality
-quality_type = high
 weight = 1
-material = generic_pla
 
 [values]
-wall_thickness = 1.05
-top_bottom_thickness = 0.8
-infill_sparse_density = 20
-speed_print = 50
-speed_layer_0 = =round(speed_print * 30 / 50)
-speed_topbottom = =math.ceil(speed_print * 20 / 50)
 cool_min_layer_time = 5
 cool_min_speed = 10
+infill_sparse_density = 20
+speed_layer_0 = =round(speed_print * 30 / 50)
+speed_print = 50
+speed_topbottom = =math.ceil(speed_print * 20 / 50)
+top_bottom_thickness = 0.8
+wall_thickness = 1.05
+

resources/quality/abax_pri5/apri5_pla_normal.inst.cfg

@@ -1,21 +1,22 @@
 [general]
-version = 4
-name = Fine
 definition = abax_pri5
+name = Fine
+version = 4
 
 [metadata]
+material = generic_pla
+quality_type = normal
 setting_version = 20
 type = quality
-quality_type = normal
 weight = 0
-material = generic_pla
 
 [values]
-wall_thickness = 1.05
-top_bottom_thickness = 0.8
-infill_sparse_density = 20
-speed_print = 50
-speed_layer_0 = =round(speed_print * 30 / 50)
-speed_topbottom = =math.ceil(speed_print * 20 / 50)
 cool_min_layer_time = 5
 cool_min_speed = 10
+infill_sparse_density = 20
+speed_layer_0 = =round(speed_print * 30 / 50)
+speed_print = 50
+speed_topbottom = =math.ceil(speed_print * 20 / 50)
+top_bottom_thickness = 0.8
+wall_thickness = 1.05
+

resources/quality/abax_titan/atitan_pla_fast.inst.cfg

@@ -1,22 +1,23 @@
 [general]
-version = 4
-name = Fine
 definition = abax_titan
+name = Fine
+version = 4
 
 [metadata]
+material = generic_pla
+quality_type = normal
 setting_version = 20
 type = quality
-quality_type = normal
 weight = 0
-material = generic_pla
 
 [values]
-layer_height = 0.2
-wall_thickness = 1.05
-top_bottom_thickness = 0.8
-infill_sparse_density = 20
-speed_print = 80
-speed_layer_0 = =round(speed_print * 30 / 50)
-speed_topbottom = =math.ceil(speed_print * 20 / 80)
 cool_min_layer_time = 5
 cool_min_speed = 10
+infill_sparse_density = 20
+layer_height = 0.2
+speed_layer_0 = =round(speed_print * 30 / 50)
+speed_print = 80
+speed_topbottom = =math.ceil(speed_print * 20 / 80)
+top_bottom_thickness = 0.8
+wall_thickness = 1.05
+

resources/quality/abax_titan/atitan_pla_high.inst.cfg

@@ -1,22 +1,23 @@
 [general]
-version = 4
-name = Extra Fine
 definition = abax_titan
+name = Extra Fine
+version = 4
 
 [metadata]
+material = generic_pla
+quality_type = high
 setting_version = 20
 type = quality
-quality_type = high
 weight = 1
-material = generic_pla
 
 [values]
-layer_height = 0.1
-wall_thickness = 1.05
-top_bottom_thickness = 0.8
-infill_sparse_density = 20
-speed_print = 50
-speed_layer_0 = =round(speed_print * 30 / 50)
-speed_topbottom = =math.ceil(speed_print * 20 / 50)
 cool_min_layer_time = 5
 cool_min_speed = 10
+infill_sparse_density = 20
+layer_height = 0.1
+speed_layer_0 = =round(speed_print * 30 / 50)
+speed_print = 50
+speed_topbottom = =math.ceil(speed_print * 20 / 50)
+top_bottom_thickness = 0.8
+wall_thickness = 1.05
+

resources/quality/abax_titan/atitan_pla_normal.inst.cfg

@@ -1,22 +1,23 @@
 [general]
-version = 4
-name = Fine
 definition = abax_titan
+name = Fine
+version = 4
 
 [metadata]
+material = generic_pla
+quality_type = normal
 setting_version = 20
 type = quality
-quality_type = normal
 weight = 0
-material = generic_pla
 
 [values]
-layer_height = 0.2
-wall_thickness = 1.05
-top_bottom_thickness = 0.8
-infill_sparse_density = 20
-speed_print = 50
-speed_layer_0 = =round(speed_print * 30 / 50)
-speed_topbottom = =math.ceil(speed_print * 20 / 50)
 cool_min_layer_time = 5
 cool_min_speed = 10
+infill_sparse_density = 20
+layer_height = 0.2
+speed_layer_0 = =round(speed_print * 30 / 50)
+speed_print = 50
+speed_topbottom = =math.ceil(speed_print * 20 / 50)
+top_bottom_thickness = 0.8
+wall_thickness = 1.05
+

resources/quality/anycubic_4max/abs/anycubic_4max_abs_draft.inst.cfg

@@ -1,15 +1,16 @@
 [general]
-version = 4
-name = Draft
 definition = anycubic_4max
+name = Draft
+version = 4
 
 [metadata]
+material = generic_abs
+quality_type = draft
 setting_version = 20
 type = quality
-quality_type = draft
 weight = -2
-material = generic_abs
 
 [values]
-cool_fan_enabled = False
 adhesion_type = brim
+cool_fan_enabled = False
+

resources/quality/anycubic_4max/abs/anycubic_4max_abs_high.inst.cfg

@@ -1,15 +1,16 @@
 [general]
-version = 4
-name = High
 definition = anycubic_4max
+name = High
+version = 4
 
 [metadata]
+material = generic_abs
+quality_type = high
 setting_version = 20
 type = quality
-quality_type = high
 weight = 1
-material = generic_abs
 
 [values]
-cool_fan_enabled = False
 adhesion_type = brim
+cool_fan_enabled = False
+

resources/quality/anycubic_4max/abs/anycubic_4max_abs_normal.inst.cfg

@@ -1,16 +1,16 @@
 [general]
-version = 4
-name = Normal
 definition = anycubic_4max
+name = Normal
+version = 4
 
 [metadata]
+material = generic_abs
+quality_type = normal
 setting_version = 20
 type = quality
-quality_type = normal
 weight = 0
-material = generic_abs
 
 [values]
-cool_fan_enabled = False
 adhesion_type = brim
+cool_fan_enabled = False
 

resources/quality/anycubic_4max/anycubic_4max_draft.inst.cfg

@@ -1,14 +1,14 @@
 [general]
-version = 4
-name = Draft
 definition = anycubic_4max
+name = Draft
+version = 4
 
 [metadata]
+global_quality = True
+quality_type = draft
 setting_version = 20
 type = quality
-quality_type = draft
 weight = -2
-global_quality = True
 
 [values]
 layer_height = 0.3

resources/quality/anycubic_4max/anycubic_4max_high.inst.cfg

@@ -1,14 +1,14 @@
 [general]
-version = 4
-name = High
 definition = anycubic_4max
+name = High
+version = 4
 
 [metadata]
+global_quality = True
+quality_type = high
 setting_version = 20
 type = quality
-quality_type = high
 weight = 1
-global_quality = True
 
 [values]
 layer_height = 0.15

resources/quality/anycubic_4max/anycubic_4max_normal.inst.cfg

@@ -1,14 +1,15 @@
 [general]
-version = 4
-name = Normal
 definition = anycubic_4max
+name = Normal
+version = 4
 
 [metadata]
+global_quality = True
+quality_type = normal
 setting_version = 20
 type = quality
-quality_type = normal
 weight = 0
-global_quality = True
 
 [values]
 layer_height = 0.2
+

resources/quality/anycubic_4max/hips/anycubic_4max_hips_draft.inst.cfg

@@ -1,14 +1,14 @@
 [general]
-version = 4
-name = Draft
 definition = anycubic_4max
+name = Draft
+version = 4
 
 [metadata]
+material = generic_hips
+quality_type = draft
 setting_version = 20
 type = quality
-quality_type = draft
 weight = -2
-material = generic_hips
 
 [values]
 

resources/quality/anycubic_4max/hips/anycubic_4max_hips_high.inst.cfg

@@ -1,14 +1,14 @@
 [general]
-version = 4
-name = High
 definition = anycubic_4max
+name = High
+version = 4
 
 [metadata]
+material = generic_hips
+quality_type = high
 setting_version = 20
 type = quality
-quality_type = high
 weight = 1
-material = generic_hips
 
 [values]
 

resources/quality/anycubic_4max/hips/anycubic_4max_hips_normal.inst.cfg

@@ -1,14 +1,14 @@
 [general]
-version = 4
-name = Normal
 definition = anycubic_4max
+name = Normal
+version = 4
 
 [metadata]
+material = generic_hips
+quality_type = normal
 setting_version = 20
 type = quality
-quality_type = normal
 weight = 0
-material = generic_hips
 
 [values]
 

resources/quality/anycubic_4max/petg/anycubic_4max_petg_draft.inst.cfg

@@ -1,17 +1,17 @@
 [general]
-version = 4
-name = Draft
 definition = anycubic_4max
+name = Draft
+version = 4
 
 [metadata]
+material = generic_petg
+quality_type = draft
 setting_version = 20
 type = quality
-quality_type = draft
 weight = -2
-material = generic_petg
 
 [values]
-material_print_temperature = =default_material_print_temperature + 35
 cool_fan_enabled = False
-
+material_print_temperature = =default_material_print_temperature + 35
 speed_print = 30
+

resources/quality/anycubic_4max/petg/anycubic_4max_petg_high.inst.cfg

@@ -1,17 +1,17 @@
 [general]
-version = 4
-name = High
 definition = anycubic_4max
+name = High
+version = 4
 
 [metadata]
+material = generic_petg
+quality_type = high
 setting_version = 20
 type = quality
-quality_type = high
 weight = 1
-material = generic_petg
 
 [values]
-material_print_temperature = =default_material_print_temperature + 35
 cool_fan_enabled = False
-
+material_print_temperature = =default_material_print_temperature + 35
 speed_print = 30
+

resources/quality/anycubic_4max/petg/anycubic_4max_petg_normal.inst.cfg

@@ -1,17 +1,17 @@
 [general]
-version = 4
-name = Normal
 definition = anycubic_4max
+name = Normal
+version = 4
 
 [metadata]
+material = generic_petg
+quality_type = normal
 setting_version = 20
 type = quality
-quality_type = normal
 weight = 0
-material = generic_petg
 
 [values]
-material_print_temperature = =default_material_print_temperature + 35
 cool_fan_enabled = False
-
+material_print_temperature = =default_material_print_temperature + 35
 speed_print = 30
+

resources/quality/anycubic_4max/pla/anycubic_4max_pla_draft.inst.cfg

@@ -1,15 +1,14 @@
 [general]
-version = 4
-name = Draft
 definition = anycubic_4max
+name = Draft
+version = 4
 
 [metadata]
+material = generic_pla
+quality_type = draft
 setting_version = 20
 type = quality
-quality_type = draft
 weight = -2
-material = generic_pla
 
 [values]
 
-

resources/quality/anycubic_4max/pla/anycubic_4max_pla_high.inst.cfg

@@ -1,14 +1,14 @@
 [general]
-version = 4
-name = High
 definition = anycubic_4max
+name = High
+version = 4
 
 [metadata]
+material = generic_pla
+quality_type = high
 setting_version = 20
 type = quality
-quality_type = high
 weight = 1
-material = generic_pla
 
 [values]
 

resources/quality/anycubic_4max/pla/anycubic_4max_pla_normal.inst.cfg

@@ -1,14 +1,14 @@
 [general]
-version = 4
-name = Normal
 definition = anycubic_4max
+name = Normal
+version = 4
 
 [metadata]
+material = generic_pla
+quality_type = normal
 setting_version = 20
 type = quality
-quality_type = normal
 weight = 0
-material = generic_pla
 
 [values]
 

resources/quality/anycubic_chiron/anycubic_chiron_draft.inst.cfg

@@ -1,14 +1,14 @@
 [general]
-version = 4
-name = Draft
 definition = anycubic_chiron
+name = Draft
+version = 4
 
 [metadata]
+global_quality = True
+quality_type = draft
 setting_version = 20
 type = quality
-quality_type = draft
 weight = -2
-global_quality = True
 
 [values]
 acceleration_enabled = True
@@ -58,3 +58,4 @@ support_use_towers = False
 support_xy_distance = 0.7
 top_bottom_thickness = 1.2
 wall_thickness = 1.2
+

resources/quality/anycubic_chiron/anycubic_chiron_high.inst.cfg

@@ -1,14 +1,14 @@
 [general]
-version = 4
-name = High
 definition = anycubic_chiron
+name = High
+version = 4
 
 [metadata]
+global_quality = True
+quality_type = high
 setting_version = 20
 type = quality
-quality_type = high
 weight = 1
-global_quality = True
 
 [values]
 acceleration_enabled = True
@@ -58,3 +58,4 @@ support_use_towers = False
 support_xy_distance = 0.7
 top_bottom_thickness = 1.2
 wall_thickness = 1.2
+

resources/quality/anycubic_chiron/anycubic_chiron_normal.inst.cfg

@@ -1,14 +1,14 @@
 [general]
-version = 4
-name = Normal
 definition = anycubic_chiron
+name = Normal
+version = 4
 
 [metadata]
+global_quality = True
+quality_type = normal
 setting_version = 20
 type = quality
-quality_type = normal
 weight = 0
-global_quality = True
 
 [values]
 acceleration_enabled = True
@@ -58,3 +58,4 @@ support_use_towers = False
 support_xy_distance = 0.7
 top_bottom_thickness = 1.2
 wall_thickness = 1.2
+

resources/quality/anycubic_i3_mega/anycubic_i3_mega_draft.inst.cfg

@@ -1,14 +1,14 @@
 [general]
-version = 4
-name = Draft
 definition = anycubic_i3_mega
+name = Draft
+version = 4
 
 [metadata]
+global_quality = True
+quality_type = draft
 setting_version = 20
 type = quality
-quality_type = draft
 weight = -2
-global_quality = True
 
 [values]
 acceleration_enabled = True
@@ -54,3 +54,4 @@ support_use_towers = False
 support_xy_distance = 0.7
 top_bottom_thickness = 1.2
 wall_thickness = 1.2
+

resources/quality/anycubic_i3_mega/anycubic_i3_mega_high.inst.cfg

@@ -1,14 +1,14 @@
 [general]
-version = 4
-name = High
 definition = anycubic_i3_mega
+name = High
+version = 4
 
 [metadata]
+global_quality = True
+quality_type = high
 setting_version = 20
 type = quality
-quality_type = high
 weight = 1
-global_quality = True
 
 [values]
 acceleration_enabled = True
@@ -54,3 +54,4 @@ support_use_towers = False
 support_xy_distance = 0.7
 top_bottom_thickness = 1.2
 wall_thickness = 1.2
+

resources/quality/anycubic_i3_mega/anycubic_i3_mega_normal.inst.cfg

@@ -1,14 +1,14 @@
 [general]
-version = 4
-name = Normal
 definition = anycubic_i3_mega
+name = Normal
+version = 4
 
 [metadata]
+global_quality = True
+quality_type = normal
 setting_version = 20
 type = quality
-quality_type = normal
 weight = 0
-global_quality = True
 
 [values]
 acceleration_enabled = True
@@ -54,3 +54,4 @@ support_use_towers = False
 support_xy_distance = 0.7
 top_bottom_thickness = 1.2
 wall_thickness = 1.2
+

resources/quality/anycubic_i3_mega_s/anycubic_i3_mega_s_draft.inst.cfg

@@ -1,14 +1,15 @@
 [general]
-version = 4
-name = Draft
 definition = anycubic_i3_mega_s
+name = Draft
+version = 4
 
 [metadata]
+global_quality = True
+quality_type = draft
 setting_version = 20
 type = quality
-quality_type = draft
 weight = -2
-global_quality = True
 
 [values]
-layer_height = 0.3
+layer_height = 0.3
+

resources/quality/anycubic_i3_mega_s/anycubic_i3_mega_s_high.inst.cfg

@@ -1,14 +1,15 @@
 [general]
-version = 4
-name = High
 definition = anycubic_i3_mega_s
+name = High
+version = 4
 
 [metadata]
+global_quality = True
+quality_type = high
 setting_version = 20
 type = quality
-quality_type = high
 weight = 1
-global_quality = True
 
 [values]
-layer_height = 0.1
+layer_height = 0.1
+

resources/quality/anycubic_i3_mega_s/anycubic_i3_mega_s_normal.inst.cfg

@@ -1,14 +1,15 @@
 [general]
-version = 4
-name = Normal
 definition = anycubic_i3_mega_s
+name = Normal
+version = 4
 
 [metadata]
+global_quality = True
+quality_type = normal
 setting_version = 20
 type = quality
-quality_type = normal
 weight = 0
-global_quality = True
 
 [values]
-layer_height = 0.2
+layer_height = 0.2
+

resources/quality/anycubic_kobra/anycubic_kobra_abs.inst.cfg

@@ -1,38 +1,38 @@
 [general]
-version = 4
-name = Suggested parameters for ABS_V1.0
 definition = anycubic_kobra
+name = Suggested parameters for ABS_V1.0
+version = 4
 
 [metadata]
+global_quality = True
+quality_type = abs
 setting_version = 20
 type = quality
-quality_type = abs
 weight = 0
-global_quality = True
 
 [values]
-layer_height = 0.2
 acceleration_enabled = True
-default_material_bed_temperature = 80
-jerk_enabled = True
-layer_height_0 = 0.2
 acceleration_print = 800
 acceleration_travel = 3000
 acceleration_travel_layer_0 = 3000.0
 bottom_layers = 6
 brim_width = 7.0
+default_material_bed_temperature = 80
 default_material_print_temperature = 230
 infill_overlap = 15
 infill_sparse_density = 20
 initial_layer_line_width_factor = 140
+inset_direction = outside_in
+jerk_enabled = True
 jerk_print = 8
 jerk_travel = 10
+layer_height = 0.2
+layer_height_0 = 0.2
 material_final_print_temperature = 230
 material_flow = 100
 material_flow_layer_0 = 120
 material_initial_print_temperature = 230
 optimize_wall_printing_order = True
-inset_direction = outside_in
 retraction_amount = 6
 retraction_min_travel = =line_width * 2
 retraction_speed = 40
@@ -43,4 +43,5 @@ top_bottom_thickness = 1.2
 wall_thickness = 1.2
 z_seam_type = sharpest_corner
 z_seam_x = 110
-z_seam_y = 220
+z_seam_y = 220
+

resources/quality/anycubic_kobra/anycubic_kobra_pla.inst.cfg

@@ -1,20 +1,17 @@
 [general]
-version = 4
-name = Suggested parameters for PLA_V1.0
 definition = anycubic_kobra
+name = Suggested parameters for PLA_V1.0
+version = 4
 
 [metadata]
+global_quality = True
+quality_type = pla
 setting_version = 20
 type = quality
-quality_type = pla
 weight = -2
-global_quality = True
 
 [values]
-layer_height = 0.2
 acceleration_enabled = True
-jerk_enabled = True
-layer_height_0 = 0.2
 acceleration_print = 1000
 acceleration_travel_layer_0 = 2000.0
 bottom_layers = 6
@@ -22,12 +19,15 @@ brim_width = 4.0
 infill_overlap = 15
 infill_sparse_density = 15
 initial_layer_line_width_factor = 100
+inset_direction = outside_in
+jerk_enabled = True
 jerk_print = 8
 jerk_travel = 10
+layer_height = 0.2
+layer_height_0 = 0.2
 material_final_print_temperature = 200
 material_initial_print_temperature = 200
 optimize_wall_printing_order = True
-inset_direction = outside_in
 retraction_amount = 6
 retraction_min_travel = 1.5
 retraction_speed = 40
@@ -38,4 +38,5 @@ top_bottom_thickness = 1.2
 wall_thickness = 1.2
 z_seam_type = sharpest_corner
 z_seam_x = 110
-z_seam_y = 220
+z_seam_y = 220
+

resources/quality/anycubic_kobra/anycubic_kobra_tpu.inst.cfg

@@ -1,20 +1,17 @@
 [general]
-version = 4
-name = Suggested parameters for TPU_V1.0
 definition = anycubic_kobra
+name = Suggested parameters for TPU_V1.0
+version = 4
 
 [metadata]
+global_quality = True
+quality_type = tpu
 setting_version = 20
 type = quality
-quality_type = tpu
 weight = 1
-global_quality = True
 
 [values]
-layer_height = 0.2
 acceleration_enabled = True
-jerk_enabled = True
-layer_height_0 = 0.2
 acceleration_print = 800
 acceleration_travel = 3000
 acceleration_travel_layer_0 = 3000.0
@@ -24,14 +21,17 @@ default_material_print_temperature = 190
 infill_overlap = 15
 infill_sparse_density = 25
 initial_layer_line_width_factor = 140
+inset_direction = outside_in
+jerk_enabled = True
 jerk_print = 8
 jerk_travel = 10
+layer_height = 0.2
+layer_height_0 = 0.2
 material_final_print_temperature = 190
 material_flow = 90
 material_flow_layer_0 = 120
 material_initial_print_temperature = 190
 optimize_wall_printing_order = True
-inset_direction = outside_in
 retraction_amount = 8
 retraction_min_travel = =line_width * 2
 retraction_speed = 60
@@ -42,4 +42,5 @@ top_bottom_thickness = 1.2
 wall_thickness = 1.2
 z_seam_type = sharpest_corner
 z_seam_x = 110
-z_seam_y = 220
+z_seam_y = 220
+

resources/quality/anycubic_kobra_max/anycubic_kobra_max_pla.inst.cfg

@@ -1,28 +1,28 @@
 [general]
-version = 4
-name = Suggested parameters for PLA_V1.0
 definition = anycubic_kobra_max
+name = Suggested parameters for PLA_V1.0
+version = 4
 
 [metadata]
+global_quality = True
+quality_type = pla
 setting_version = 20
 type = quality
-quality_type = pla
 weight = -2
-global_quality = True
 
 [values]
-layer_height = 0.2
 acceleration_enabled = True
-jerk_enabled = True
-layer_height_0 = 0.2
 acceleration_print = 1000
 acceleration_travel = 3000
 brim_width = 7
 default_material_print_temperature = 195
 infill_sparse_density = 15
 initial_layer_line_width_factor = 140
+jerk_enabled = True
 jerk_print = 8
 jerk_travel = 10
+layer_height = 0.2
+layer_height_0 = 0.2
 material_final_print_temperature = 195
 material_flow = 95
 material_flow_layer_0 = 120
@@ -50,4 +50,5 @@ top_thickness = 1.2
 wall_thickness = 1.2
 z_seam_type = sharpest_corner
 z_seam_x = 110
-z_seam_y = 220
+z_seam_y = 220
+

resources/quality/anycubic_kobra_max/anycubic_kobra_max_tpu.inst.cfg

@@ -1,20 +1,17 @@
 [general]
-version = 4
-name = Suggested parameters for TPU_V1.0
 definition = anycubic_kobra_max
+name = Suggested parameters for TPU_V1.0
+version = 4
 
 [metadata]
+global_quality = True
+quality_type = tpu
 setting_version = 20
 type = quality
-quality_type = tpu
 weight = 1
-global_quality = True
 
 [values]
-layer_height = 0.2
 acceleration_enabled = True
-jerk_enabled = False
-layer_height_0 = 0.3
 acceleration_print = 1000
 acceleration_travel = 3000
 brim_width = 5
@@ -23,8 +20,11 @@ default_material_print_temperature = 210
 infill_overlap = 15
 infill_sparse_density = 15
 initial_layer_line_width_factor = 130
+jerk_enabled = False
 jerk_print = 8
 jerk_travel = 10
+layer_height = 0.2
+layer_height_0 = 0.3
 material_final_print_temperature = 210
 material_flow = 90
 material_flow_layer_0 = 100
@@ -51,4 +51,5 @@ top_bottom_thickness = 1.2
 wall_thickness = 1.2
 z_seam_type = sharpest_corner
 z_seam_x = 110
-z_seam_y = 220
+z_seam_y = 220
+

resources/quality/anycubic_mega_zero/anycubic_mega_zero_draft.inst.cfg

@@ -1,17 +1,18 @@
 [general]
-version = 4
-name = Draft
 definition = anycubic_mega_zero
+name = Draft
+version = 4
 
 [metadata]
+global_quality = True
+quality_type = draft
 setting_version = 20
 type = quality
-quality_type = draft
 weight = -2
-global_quality = True
 
 [values]
 layer_height = 0.3
 layer_height_0 = 0.3
 speed_print = 60
 speed_travel = 100
+

resources/quality/anycubic_mega_zero/anycubic_mega_zero_high.inst.cfg

@@ -1,17 +1,18 @@
 [general]
-version = 4
-name = High
 definition = anycubic_mega_zero
+name = High
+version = 4
 
 [metadata]
+global_quality = True
+quality_type = high
 setting_version = 20
 type = quality
-quality_type = high
 weight = 1
-global_quality = True
 
 [values]
 layer_height = 0.1
 layer_height_0 = 0.1
 speed_print = 30
 speed_travel = 50
+

resources/quality/anycubic_mega_zero/anycubic_mega_zero_normal.inst.cfg

@@ -1,17 +1,18 @@
 [general]
-version = 4
-name = Normal
 definition = anycubic_mega_zero
+name = Normal
+version = 4
 
 [metadata]
+global_quality = True
+quality_type = normal
 setting_version = 20
 type = quality
-quality_type = normal
 weight = 0
-global_quality = True
 
 [values]
 layer_height = 0.2
 layer_height_0 = 0.2
 speed_print = 40
 speed_travel = 100
+

resources/quality/anycubic_predator/predator_coarse.inst.cfg

@@ -1,15 +1,16 @@
 [general]
-version = 4
-name = Coarse
 definition = predator
+name = Coarse
+version = 4
 
 [metadata]
+global_quality = True
+quality_type = coarse
 setting_version = 20
 type = quality
-quality_type = coarse
 weight = -3
-global_quality = True
 
 [values]
 layer_height = 0.4
-layer_height_0 = 0.45
+layer_height_0 = 0.45
+

resources/quality/anycubic_predator/predator_draft.inst.cfg

@@ -1,15 +1,16 @@
-[general]
-version = 4
-name = Draft
-definition = predator
-
-[metadata]
-setting_version = 20
-type = quality
-quality_type = draft
-weight = -2
-global_quality = True
-
-[values]
-layer_height = 0.30
-layer_height_0 = 0.35
+[general]
+definition = predator
+name = Draft
+version = 4
+
+[metadata]
+global_quality = True
+quality_type = draft
+setting_version = 20
+type = quality
+weight = -2
+
+[values]
+layer_height = 0.30
+layer_height_0 = 0.35
+

resources/quality/anycubic_predator/predator_extra_coarse.inst.cfg

@@ -1,15 +1,16 @@
 [general]
-version = 4
-name = Extra Coarse
 definition = predator
+name = Extra Coarse
+version = 4
 
 [metadata]
+global_quality = True
+quality_type = Xcoarse
 setting_version = 20
 type = quality
-quality_type = Xcoarse
 weight = -4
-global_quality = True
 
 [values]
 layer_height = 0.5
 layer_height_0 = 0.55
+

resources/quality/anycubic_predator/predator_extra_fine.inst.cfg

@@ -1,15 +1,16 @@
-[general]
-version = 4
-name = Extra Fine
-definition = predator
-
-[metadata]
-setting_version = 20
-type = quality
-quality_type = Xfine
-weight = 1
-global_quality = True
-
-[values]
-layer_height = 0.05
-layer_height_0 = 0.10
+[general]
+definition = predator
+name = Extra Fine
+version = 4
+
+[metadata]
+global_quality = True
+quality_type = Xfine
+setting_version = 20
+type = quality
+weight = 1
+
+[values]
+layer_height = 0.05
+layer_height_0 = 0.10
+

resources/quality/anycubic_predator/predator_fine.inst.cfg

@@ -1,15 +1,16 @@
-[general]
-version = 4
-name = Fine
-definition = predator
-
-[metadata]
-setting_version = 20
-type = quality
-quality_type = fine
-weight = 1
-global_quality = True
-
-[values]
-layer_height = 0.1
-layer_height_0 = 0.15
+[general]
+definition = predator
+name = Fine
+version = 4
+
+[metadata]
+global_quality = True
+quality_type = fine
+setting_version = 20
+type = quality
+weight = 1
+
+[values]
+layer_height = 0.1
+layer_height_0 = 0.15
+

resources/quality/anycubic_predator/predator_normal.inst.cfg

@@ -1,15 +1,16 @@
 [general]
-version = 4
-name = Normal
 definition = predator
+name = Normal
+version = 4
 
 [metadata]
+global_quality = True
+quality_type = normal
 setting_version = 20
 type = quality
-quality_type = normal
 weight = 0
-global_quality = True
 
 [values]
 layer_height = 0.2
-layer_height_0 = 0.25
+layer_height_0 = 0.25
+

resources/quality/artillery/ABS/artillery_0.2_ABS_super.inst.cfg

@@ -1,14 +1,15 @@
 [general]
-version = 4
-name = Super Quality
 definition = artillery_base
+name = Super Quality
+version = 4
 
 [metadata]
+material = generic_abs
+quality_type = super
 setting_version = 20
 type = quality
-quality_type = super
-material = generic_abs
 variant = 0.2mm Nozzle
 
 [values]
 wall_thickness = =line_width*8
+

resources/quality/artillery/ABS/artillery_0.2_ABS_ultra.inst.cfg

@@ -1,14 +1,15 @@
 [general]
-version = 4
-name = Ultra Quality
 definition = artillery_base
+name = Ultra Quality
+version = 4
 
 [metadata]
+material = generic_abs
+quality_type = ultra
 setting_version = 20
 type = quality
-quality_type = ultra
-material = generic_abs
 variant = 0.2mm Nozzle
 
 [values]
 wall_thickness = =line_width*8
+

resources/quality/artillery/ABS/artillery_0.3_ABS_adaptive.inst.cfg

@@ -1,14 +1,15 @@
 [general]
-version = 4
-name = Dynamic Quality
 definition = artillery_base
+name = Dynamic Quality
+version = 4
 
 [metadata]
+material = generic_abs
+quality_type = adaptive
 setting_version = 20
 type = quality
-quality_type = adaptive
-material = generic_abs
 variant = 0.3mm Nozzle
 
 [values]
 wall_thickness = =line_width*4
+

resources/quality/artillery/ABS/artillery_0.3_ABS_low.inst.cfg

@@ -1,14 +1,15 @@
 [general]
-version = 4
-name = Low Quality
 definition = artillery_base
+name = Low Quality
+version = 4
 
 [metadata]
+material = generic_abs
+quality_type = low
 setting_version = 20
 type = quality
-quality_type = low
-material = generic_abs
 variant = 0.3mm Nozzle
 
 [values]
 wall_thickness = =line_width*4
+

resources/quality/artillery/ABS/artillery_0.3_ABS_standard.inst.cfg

@@ -1,14 +1,15 @@
 [general]
-version = 4
-name = Standard Quality
 definition = artillery_base
+name = Standard Quality
+version = 4
 
 [metadata]
+material = generic_abs
+quality_type = standard
 setting_version = 20
 type = quality
-quality_type = standard
-material = generic_abs
 variant = 0.3mm Nozzle
 
 [values]
 wall_thickness = =line_width*4
+

resources/quality/artillery/ABS/artillery_0.3_ABS_super.inst.cfg

@@ -1,14 +1,15 @@
 [general]
-version = 4
-name = Super Quality
 definition = artillery_base
+name = Super Quality
+version = 4
 
 [metadata]
+material = generic_abs
+quality_type = super
 setting_version = 20
 type = quality
-quality_type = super
-material = generic_abs
 variant = 0.3mm Nozzle
 
 [values]
 wall_thickness = =line_width*4
+

resources/quality/artillery/ABS/artillery_0.4_ABS_adaptive.inst.cfg

@@ -1,14 +1,15 @@
 [general]
-version = 4
-name = Dynamic Quality
 definition = artillery_base
+name = Dynamic Quality
+version = 4
 
 [metadata]
+material = generic_abs
+quality_type = adaptive
 setting_version = 20
 type = quality
-quality_type = adaptive
-material = generic_abs
 variant = 0.4mm Nozzle
 
 [values]
 wall_thickness = =line_width*4
+

resources/quality/artillery/ABS/artillery_0.4_ABS_low.inst.cfg

@@ -1,14 +1,15 @@
 [general]
-version = 4
-name = Low Quality
 definition = artillery_base
+name = Low Quality
+version = 4
 
 [metadata]
+material = generic_abs
+quality_type = low
 setting_version = 20
 type = quality
-quality_type = low
-material = generic_abs
 variant = 0.4mm Nozzle
 
 [values]
 wall_thickness = =line_width*4
+

resources/quality/artillery/ABS/artillery_0.4_ABS_standard.inst.cfg

@@ -1,14 +1,15 @@
 [general]
-version = 4
-name = Standard Quality
 definition = artillery_base
+name = Standard Quality
+version = 4
 
 [metadata]
+material = generic_abs
+quality_type = standard
 setting_version = 20
 type = quality
-quality_type = standard
-material = generic_abs
 variant = 0.4mm Nozzle
 
 [values]
 wall_thickness = =line_width*4
+

resources/quality/artillery/ABS/artillery_0.4_ABS_super.inst.cfg

@@ -1,14 +1,15 @@
 [general]
-version = 4
-name = Super Quality
 definition = artillery_base
+name = Super Quality
+version = 4
 
 [metadata]
+material = generic_abs
+quality_type = super
 setting_version = 20
 type = quality
-quality_type = super
-material = generic_abs
 variant = 0.4mm Nozzle
 
 [values]
 wall_thickness = =line_width*4
+

resources/quality/artillery/ABS/artillery_0.5_ABS_adaptive.inst.cfg

@@ -1,14 +1,15 @@
 [general]
-version = 4
-name = Dynamic Quality
 definition = artillery_base
+name = Dynamic Quality
+version = 4
 
 [metadata]
+material = generic_abs
+quality_type = adaptive
 setting_version = 20
 type = quality
-quality_type = adaptive
-material = generic_abs
 variant = 0.5mm Nozzle
 
 [values]
 wall_thickness = =line_width*4
+

resources/quality/artillery/ABS/artillery_0.5_ABS_low.inst.cfg

@@ -1,14 +1,15 @@
 [general]
-version = 4
-name = Low Quality
 definition = artillery_base
+name = Low Quality
+version = 4
 
 [metadata]
+material = generic_abs
+quality_type = low
 setting_version = 20
 type = quality
-quality_type = low
-material = generic_abs
 variant = 0.5mm Nozzle
 
 [values]
 wall_thickness = =line_width*4
+

resources/quality/artillery/ABS/artillery_0.5_ABS_standard.inst.cfg

@@ -1,14 +1,15 @@
 [general]
-version = 4
-name = Standard Quality
 definition = artillery_base
+name = Standard Quality
+version = 4
 
 [metadata]
+material = generic_abs
+quality_type = standard
 setting_version = 20
 type = quality
-quality_type = standard
-material = generic_abs
 variant = 0.5mm Nozzle
 
 [values]
 wall_thickness = =line_width*4
+

resources/quality/artillery/ABS/artillery_0.5_ABS_super.inst.cfg

@@ -1,14 +1,15 @@
 [general]
-version = 4
-name = Super Quality
 definition = artillery_base
+name = Super Quality
+version = 4
 
 [metadata]
+material = generic_abs
+quality_type = super
 setting_version = 20
 type = quality
-quality_type = super
-material = generic_abs
 variant = 0.5mm Nozzle
 
 [values]
 wall_thickness = =line_width*4
+

resources/quality/artillery/ABS/artillery_0.6_ABS_standard.inst.cfg

@@ -1,14 +1,15 @@
 [general]
-version = 4
-name = Standard Quality
 definition = artillery_base
+name = Standard Quality
+version = 4
 
 [metadata]
+material = generic_abs
+quality_type = standard
 setting_version = 20
 type = quality
-quality_type = standard
-material = generic_abs
 variant = 0.6mm Nozzle
 
 [values]
 wall_thickness = =line_width*3
+

resources/quality/artillery/ABS/artillery_0.8_ABS_draft.inst.cfg

@@ -1,14 +1,15 @@
 [general]
-version = 4
-name = Draft Quality
 definition = artillery_base
+name = Draft Quality
+version = 4
 
 [metadata]
+material = generic_abs
+quality_type = draft
 setting_version = 20
 type = quality
-quality_type = draft
-material = generic_abs
 variant = 0.8mm Nozzle
 
 [values]
 wall_thickness = =line_width*3
+

resources/quality/artillery/ABS/artillery_1.0_ABS_draft.inst.cfg

@@ -1,14 +1,15 @@
 [general]
-version = 4
-name = Draft Quality
 definition = artillery_base
+name = Draft Quality
+version = 4
 
 [metadata]
+material = generic_abs
+quality_type = draft
 setting_version = 20
 type = quality
-quality_type = draft
-material = generic_abs
 variant = 1.0mm Nozzle
 
 [values]
 wall_thickness = =line_width*3
+

resources/quality/artillery/PETG/artillery_0.2_PETG_super.inst.cfg

@@ -1,15 +1,16 @@
 [general]
-version = 4
-name = Super Quality
 definition = artillery_base
+name = Super Quality
+version = 4
 
 [metadata]
+material = generic_petg
+quality_type = super
 setting_version = 20
 type = quality
-quality_type = super
-material = generic_petg
 variant = 0.2mm Nozzle
 
 [values]
 speed_layer_0 = 15
 wall_thickness = =line_width*8
+

resources/quality/artillery/PETG/artillery_0.2_PETG_ultra.inst.cfg

@@ -1,15 +1,16 @@
 [general]
-version = 4
-name = Ultra Quality
 definition = artillery_base
+name = Ultra Quality
+version = 4
 
 [metadata]
+material = generic_petg
+quality_type = ultra
 setting_version = 20
 type = quality
-quality_type = ultra
-material = generic_petg
 variant = 0.2mm Nozzle
 
 [values]
 speed_layer_0 = 15
 wall_thickness = =line_width*8
+

resources/quality/artillery/PETG/artillery_0.3_PETG_adaptive.inst.cfg

@@ -1,15 +1,16 @@
 [general]
-version = 4
-name = Dynamic Quality
 definition = artillery_base
+name = Dynamic Quality
+version = 4
 
 [metadata]
+material = generic_petg
+quality_type = adaptive
 setting_version = 20
 type = quality
-quality_type = adaptive
-material = generic_petg
 variant = 0.3mm Nozzle
 
 [values]
 speed_layer_0 = 15
 wall_thickness = =line_width*4
+

resources/quality/artillery/PETG/artillery_0.3_PETG_low.inst.cfg

@@ -1,15 +1,16 @@
 [general]
-version = 4
-name = Low Quality
 definition = artillery_base
+name = Low Quality
+version = 4
 
 [metadata]
+material = generic_petg
+quality_type = low
 setting_version = 20
 type = quality
-quality_type = low
-material = generic_petg
 variant = 0.3mm Nozzle
 
 [values]
 speed_layer_0 = 15
 wall_thickness = =line_width*4
+

resources/quality/artillery/PETG/artillery_0.3_PETG_standard.inst.cfg

@@ -1,16 +1,16 @@
 [general]
-version = 4
-name = Standard Quality
 definition = artillery_base
+name = Standard Quality
+version = 4
 
 [metadata]
+material = generic_petg
+quality_type = standard
 setting_version = 20
 type = quality
-quality_type = standard
-material = generic_petg
 variant = 0.3mm Nozzle
 
 [values]
 speed_layer_0 = 15
 wall_thickness = =line_width*4
-#retraction_extra_prime_amount = 0.5
+

resources/quality/artillery/PETG/artillery_0.3_PETG_super.inst.cfg

@@ -1,16 +1,16 @@
 [general]
-version = 4
-name = Super Quality
 definition = artillery_base
+name = Super Quality
+version = 4
 
 [metadata]
+material = generic_petg
+quality_type = super
 setting_version = 20
 type = quality
-quality_type = super
-material = generic_petg
 variant = 0.3mm Nozzle
 
 [values]
 speed_layer_0 = 15
 wall_thickness = =line_width*4
-#retraction_extra_prime_amount = 0.5
+

resources/quality/artillery/PETG/artillery_0.4_PETG_adaptive.inst.cfg

@@ -1,16 +1,16 @@
 [general]
-version = 4
-name = Dynamic Quality
 definition = artillery_base
+name = Dynamic Quality
+version = 4
 
 [metadata]
+material = generic_petg
+quality_type = adaptive
 setting_version = 20
 type = quality
-quality_type = adaptive
-material = generic_petg
 variant = 0.4mm Nozzle
 
 [values]
 speed_layer_0 = 15
 wall_thickness = =line_width*4
-#retraction_extra_prime_amount = 0.5
+

resources/quality/artillery/PETG/artillery_0.4_PETG_low.inst.cfg

@@ -1,16 +1,16 @@
 [general]
-version = 4
-name = Low Quality
 definition = artillery_base
+name = Low Quality
+version = 4
 
 [metadata]
+material = generic_petg
+quality_type = low
 setting_version = 20
 type = quality
-quality_type = low
-material = generic_petg
 variant = 0.4mm Nozzle
 
 [values]
 speed_layer_0 = 15
 wall_thickness = =line_width*4
-#retraction_extra_prime_amount = 0.5
+

resources/quality/artillery/PETG/artillery_0.4_PETG_standard.inst.cfg

@@ -1,16 +1,16 @@
 [general]
-version = 4
-name = Standard Quality
 definition = artillery_base
+name = Standard Quality
+version = 4
 
 [metadata]
+material = generic_petg
+quality_type = standard
 setting_version = 20
 type = quality
-quality_type = standard
-material = generic_petg
 variant = 0.4mm Nozzle
 
 [values]
 speed_layer_0 = 15
 wall_thickness = =line_width*4
-#retraction_extra_prime_amount = 0.5
+

resources/quality/artillery/PETG/artillery_0.4_PETG_super.inst.cfg

@@ -1,16 +1,16 @@
 [general]
-version = 4
-name = Super Quality
 definition = artillery_base
+name = Super Quality
+version = 4
 
 [metadata]
+material = generic_petg
+quality_type = super
 setting_version = 20
 type = quality
-quality_type = super
-material = generic_petg
 variant = 0.4mm Nozzle
 
 [values]
 speed_layer_0 = 15
 wall_thickness = =line_width*4
-#retraction_extra_prime_amount = 0.5
+

resources/quality/artillery/PETG/artillery_0.5_PETG_adaptive.inst.cfg

@@ -1,16 +1,16 @@
 [general]
-version = 4
-name = Dynamic Quality
 definition = artillery_base
+name = Dynamic Quality
+version = 4
 
 [metadata]
+material = generic_petg
+quality_type = adaptive
 setting_version = 20
 type = quality
-quality_type = adaptive
-material = generic_petg
 variant = 0.5mm Nozzle
 
 [values]
 speed_layer_0 = 15
 wall_thickness = =line_width*4
-#retraction_extra_prime_amount = 0.5
+

resources/quality/artillery/PETG/artillery_0.5_PETG_low.inst.cfg

@@ -1,16 +1,16 @@
 [general]
-version = 4
-name = Low Quality
 definition = artillery_base
+name = Low Quality
+version = 4
 
 [metadata]
+material = generic_petg
+quality_type = low
 setting_version = 20
 type = quality
-quality_type = low
-material = generic_petg
 variant = 0.5mm Nozzle
 
 [values]
 speed_layer_0 = 15
 wall_thickness = =line_width*4
-#retraction_extra_prime_amount = 0.5
+

resources/quality/artillery/PETG/artillery_0.5_PETG_standard.inst.cfg

@@ -1,16 +1,16 @@
 [general]
-version = 4
-name = Standard Quality
 definition = artillery_base
+name = Standard Quality
+version = 4
 
 [metadata]
+material = generic_petg
+quality_type = standard
 setting_version = 20
 type = quality
-quality_type = standard
-material = generic_petg
 variant = 0.5mm Nozzle
 
 [values]
 speed_layer_0 = 15
 wall_thickness = =line_width*4
-#retraction_extra_prime_amount = 0.5
+

resources/quality/artillery/PETG/artillery_0.5_PETG_super.inst.cfg

@@ -1,16 +1,16 @@
 [general]
-version = 4
-name = Super Quality
 definition = artillery_base
+name = Super Quality
+version = 4
 
 [metadata]
+material = generic_petg
+quality_type = super
 setting_version = 20
 type = quality
-quality_type = super
-material = generic_petg
 variant = 0.5mm Nozzle
 
 [values]
 speed_layer_0 = 15
 wall_thickness = =line_width*4
-#retraction_extra_prime_amount = 0.5
+

resources/quality/artillery/PETG/artillery_0.6_PETG_standard.inst.cfg

@@ -1,16 +1,16 @@
 [general]
-version = 4
-name = Standard Quality
 definition = artillery_base
+name = Standard Quality
+version = 4
 
 [metadata]
+material = generic_petg
+quality_type = standard
 setting_version = 20
 type = quality
-quality_type = standard
-material = generic_petg
 variant = 0.6mm Nozzle
 
 [values]
 speed_layer_0 = 15
 wall_thickness = =line_width*3
-#retraction_extra_prime_amount = 0.5
+

resources/quality/artillery/PETG/artillery_0.8_PETG_draft.inst.cfg

@@ -1,16 +1,16 @@
 [general]
-version = 4
-name = Draft Quality
 definition = artillery_base
+name = Draft Quality
+version = 4
 
 [metadata]
+material = generic_petg
+quality_type = draft
 setting_version = 20
 type = quality
-quality_type = draft
-material = generic_petg
 variant = 0.8mm Nozzle
 
 [values]
 speed_layer_0 = 15
 wall_thickness = =line_width*3
-#retraction_extra_prime_amount = 0.5
+

resources/quality/artillery/PETG/artillery_1.0_PETG_draft.inst.cfg

@@ -1,16 +1,16 @@
 [general]
-version = 4
-name = Draft Quality
 definition = artillery_base
+name = Draft Quality
+version = 4
 
 [metadata]
+material = generic_petg
+quality_type = draft
 setting_version = 20
 type = quality
-quality_type = draft
-material = generic_petg
 variant = 1.0mm Nozzle
 
 [values]
 speed_layer_0 = 15
 wall_thickness = =line_width*3
-#retraction_extra_prime_amount = 0.5
+

resources/quality/artillery/PLA/artillery_0.2_PLA_super.inst.cfg

@@ -1,13 +1,14 @@
 [general]
-version = 4
-name = Super Quality
 definition = artillery_base
+name = Super Quality
+version = 4
 
 [metadata]
+material = generic_pla
+quality_type = super
 setting_version = 20
 type = quality
-quality_type = super
-material = generic_pla
 variant = 0.2mm Nozzle
 
 [values]
+

resources/quality/artillery/PLA/artillery_0.2_PLA_ultra.inst.cfg

@@ -1,13 +1,14 @@
 [general]
-version = 4
-name = Ultra Quality
 definition = artillery_base
+name = Ultra Quality
+version = 4
 
 [metadata]
+material = generic_pla
+quality_type = ultra
 setting_version = 20
 type = quality
-quality_type = ultra
-material = generic_pla
 variant = 0.2mm Nozzle
 
 [values]
+

resources/quality/artillery/PLA/artillery_0.3_PLA_adaptive.inst.cfg

@@ -1,13 +1,14 @@
 [general]
-version = 4
-name = Dynamic Quality
 definition = artillery_base
+name = Dynamic Quality
+version = 4
 
 [metadata]
+material = generic_pla
+quality_type = adaptive
 setting_version = 20
 type = quality
-quality_type = adaptive
-material = generic_pla
 variant = 0.3mm Nozzle
 
 [values]
+

resources/quality/artillery/PLA/artillery_0.3_PLA_low.inst.cfg

@@ -1,13 +1,14 @@
 [general]
-version = 4
-name = Low Quality
 definition = artillery_base
+name = Low Quality
+version = 4
 
 [metadata]
+material = generic_pla
+quality_type = low
 setting_version = 20
 type = quality
-quality_type = low
-material = generic_pla
 variant = 0.3mm Nozzle
 
 [values]
+

resources/quality/artillery/PLA/artillery_0.3_PLA_standard.inst.cfg

@@ -1,13 +1,14 @@
 [general]
-version = 4
-name = Standard Quality
 definition = artillery_base
+name = Standard Quality
+version = 4
 
 [metadata]
+material = generic_pla
+quality_type = standard
 setting_version = 20
 type = quality
-quality_type = standard
-material = generic_pla
 variant = 0.3mm Nozzle
 
 [values]
+

resources/quality/artillery/PLA/artillery_0.3_PLA_super.inst.cfg

@@ -1,13 +1,14 @@
 [general]
-version = 4
-name = Super Quality
 definition = artillery_base
+name = Super Quality
+version = 4
 
 [metadata]
+material = generic_pla
+quality_type = super
 setting_version = 20
 type = quality
-quality_type = super
-material = generic_pla
 variant = 0.3mm Nozzle
 
 [values]
+

resources/quality/artillery/PLA/artillery_0.4_PLA_adaptive.inst.cfg

@@ -1,13 +1,14 @@
 [general]
-version = 4
-name = Dynamic Quality
 definition = artillery_base
+name = Dynamic Quality
+version = 4
 
 [metadata]
+material = generic_pla
+quality_type = adaptive
 setting_version = 20
 type = quality
-quality_type = adaptive
-material = generic_pla
 variant = 0.4mm Nozzle
 
 [values]
+

resources/quality/artillery/PLA/artillery_0.4_PLA_low.inst.cfg

@@ -1,13 +1,14 @@
 [general]
-version = 4
-name = Low Quality
 definition = artillery_base
+name = Low Quality
+version = 4
 
 [metadata]
+material = generic_pla
+quality_type = low
 setting_version = 20
 type = quality
-quality_type = low
-material = generic_pla
 variant = 0.4mm Nozzle
 
 [values]
+

resources/quality/artillery/PLA/artillery_0.4_PLA_standard.inst.cfg

@@ -1,13 +1,14 @@
 [general]
-version = 4
-name = Standard Quality
 definition = artillery_base
+name = Standard Quality
+version = 4
 
 [metadata]
+material = generic_pla
+quality_type = standard
 setting_version = 20
 type = quality
-quality_type = standard
-material = generic_pla
 variant = 0.4mm Nozzle
 
 [values]
+

resources/quality/artillery/PLA/artillery_0.4_PLA_super.inst.cfg

@@ -1,13 +1,14 @@
 [general]
-version = 4
-name = Super Quality
 definition = artillery_base
+name = Super Quality
+version = 4
 
 [metadata]
+material = generic_pla
+quality_type = super
 setting_version = 20
 type = quality
-quality_type = super
-material = generic_pla
 variant = 0.4mm Nozzle
 
 [values]
+

resources/quality/artillery/PLA/artillery_0.5_PLA_adaptive.inst.cfg

@@ -1,13 +1,14 @@
 [general]
-version = 4
-name = Dynamic Quality
 definition = artillery_base
+name = Dynamic Quality
+version = 4
 
 [metadata]
+material = generic_pla
+quality_type = adaptive
 setting_version = 20
 type = quality
-quality_type = adaptive
-material = generic_pla
 variant = 0.5mm Nozzle
 
 [values]
+

resources/quality/artillery/PLA/artillery_0.5_PLA_low.inst.cfg

@@ -1,13 +1,14 @@
 [general]
-version = 4
-name = Low Quality
 definition = artillery_base
+name = Low Quality
+version = 4
 
 [metadata]
+material = generic_pla
+quality_type = low
 setting_version = 20
 type = quality
-quality_type = low
-material = generic_pla
 variant = 0.5mm Nozzle
 
 [values]
+